bf60x: pm: add pint suspend and resume support

save and restore pint sec CTL
save and restore pint registers
add pint suspend and resume when suspend to mem

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
This commit is contained in:
Steven Miao 2012-06-14 18:04:01 +08:00 committed by Bob Liu
parent 688da5e87a
commit d49cdf8409
5 changed files with 76 additions and 21 deletions

View File

@ -141,6 +141,8 @@ static inline void bfin_pm_standby_restore(void)
void bfin_gpio_pm_hibernate_restore(void);
void bfin_gpio_pm_hibernate_suspend(void);
void bfin_pint_suspend(void);
void bfin_pint_resume(void);
# if !BFIN_GPIO_PINT
int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);

View File

@ -20,6 +20,16 @@
/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
#include <mach/irq.h>
/*
* pm save bfin pint registers
*/
struct bfin_pm_pint_save {
u32 mask_set;
u32 assign;
u32 edge_set;
u32 invert_set;
};
#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
#else

View File

@ -342,16 +342,19 @@ static int __init bf609_init_pm(void)
GPIO_PE12, error);
}
error = request_irq(irq, test_isr, IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND, "gpiope12", NULL);
error = request_irq(irq, test_isr, IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND
| IRQF_FORCE_RESUME, "gpiope12", NULL);
if(error < 0)
printk(KERN_DEBUG "Unable to get irq\n");
#endif
error = request_irq(IRQ_CGU_EVT, dpm0_isr, IRQF_NO_SUSPEND, "cgu0 event", NULL);
error = request_irq(IRQ_CGU_EVT, dpm0_isr, IRQF_NO_SUSPEND |
IRQF_FORCE_RESUME, "cgu0 event", NULL);
if(error < 0)
printk(KERN_DEBUG "Unable to get irq\n");
error = request_irq(IRQ_DPM, dpm0_isr, IRQF_NO_SUSPEND, "dpm0 event", NULL);
error = request_irq(IRQ_DPM, dpm0_isr, IRQF_NO_SUSPEND |
IRQF_FORCE_RESUME, "dpm0 event", NULL);
if (error < 0)
printk(KERN_DEBUG "Unable to get irq\n");

View File

@ -396,24 +396,6 @@ void handle_sec_fault(unsigned int irq, struct irq_desc *desc)
raw_spin_unlock(&desc->lock);
}
static int sec_suspend(void)
{
return 0;
}
static void sec_resume(void)
{
bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET);
udelay(100);
bfin_write_SEC_GCTL(SEC_GCTL_EN);
bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN);
}
static struct syscore_ops sec_pm_syscore_ops = {
.suspend = sec_suspend,
.resume = sec_resume,
};
#endif
#ifdef CONFIG_SMP
@ -1093,6 +1075,9 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type)
}
#ifdef CONFIG_PM
static struct bfin_pm_pint_save save_pint_reg[NR_PINT_SYS_IRQS];
static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS];
static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state)
{
u32 pint_irq;
@ -1128,6 +1113,57 @@ static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state)
return 0;
}
void bfin_pint_suspend(void)
{
u32 bank;
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
save_pint_reg[bank].mask_set = pint[bank]->mask_set;
save_pint_reg[bank].assign = pint[bank]->assign;
save_pint_reg[bank].edge_set = pint[bank]->edge_set;
save_pint_reg[bank].invert_set = pint[bank]->invert_set;
}
}
void bfin_pint_resume(void)
{
u32 bank;
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
pint[bank]->mask_set = save_pint_reg[bank].mask_set;
pint[bank]->assign = save_pint_reg[bank].assign;
pint[bank]->edge_set = save_pint_reg[bank].edge_set;
pint[bank]->invert_set = save_pint_reg[bank].invert_set;
}
}
static int sec_suspend(void)
{
u32 bank;
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++)
save_pint_sec_ctl[bank] = bfin_read_SEC_SCTL(bank + SIC_SYSIRQ(IRQ_PINT0));
return 0;
}
static void sec_resume(void)
{
u32 bank;
bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET);
udelay(100);
bfin_write_SEC_GCTL(SEC_GCTL_EN);
bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN);
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++)
bfin_write_SEC_SCTL(bank + SIC_SYSIRQ(IRQ_PINT0), save_pint_sec_ctl[bank]);
}
static struct syscore_ops sec_pm_syscore_ops = {
.suspend = sec_suspend,
.resume = sec_resume,
};
#else
# define bfin_gpio_set_wake NULL
#endif

View File

@ -172,6 +172,8 @@ int bfin_pm_suspend_mem_enter(void)
bfin_gpio_pm_hibernate_suspend();
bfin_pint_suspend();
#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
flushinv_all_dcache();
#endif
@ -190,6 +192,8 @@ int bfin_pm_suspend_mem_enter(void)
_enable_icplb();
_enable_dcplb();
bfin_pint_resume();
bfin_gpio_pm_hibernate_restore();
blackfin_dma_resume();