gpio: Kontron PLD gpio driver

Add gpio support for the on-board PLD found on some Kontron embedded modules.

Originally-from: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Guenter Roeck 2013-06-23 21:00:05 -07:00 committed by Linus Walleij
parent a3d88c92a1
commit d22fcde0b5
3 changed files with 238 additions and 0 deletions

View File

@ -691,6 +691,18 @@ config GPIO_UCB1400
This enables support for the Philips UCB1400 GPIO pins.
The UCB1400 is an AC97 audio codec.
comment "LPC GPIO expanders:"
config GPIO_KEMPLD
tristate "Kontron ETX / COMexpress GPIO"
depends on MFD_KEMPLD
help
This enables support for the PLD GPIO interface on some Kontron ETX
and COMexpress (ETXexpress) modules.
This driver can also be built as a module. If so, the module will be
called gpio-kempld.
comment "MODULbus GPIO expanders:"
config GPIO_JANZ_TTL

View File

@ -29,6 +29,7 @@ obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o

225
drivers/gpio/gpio-kempld.c Normal file
View File

@ -0,0 +1,225 @@
/*
* Kontron PLD GPIO driver
*
* Copyright (c) 2010-2013 Kontron Europe GmbH
* Author: Michael Brunner <michael.brunner@kontron.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/mfd/kempld.h>
#define KEMPLD_GPIO_MAX_NUM 16
#define KEMPLD_GPIO_MASK(x) (1 << ((x) % 8))
#define KEMPLD_GPIO_DIR_NUM(x) (0x40 + (x) / 8)
#define KEMPLD_GPIO_LVL_NUM(x) (0x42 + (x) / 8)
#define KEMPLD_GPIO_EVT_LVL_EDGE 0x46
#define KEMPLD_GPIO_IEN 0x4A
struct kempld_gpio_data {
struct gpio_chip chip;
struct kempld_device_data *pld;
};
/*
* Set or clear GPIO bit
* kempld_get_mutex must be called prior to calling this function.
*/
static void kempld_gpio_bitop(struct kempld_device_data *pld,
u8 reg, u8 bit, u8 val)
{
u8 status;
status = kempld_read8(pld, reg);
if (val)
status |= (1 << bit);
else
status &= ~(1 << bit);
kempld_write8(pld, reg, status);
}
static int kempld_gpio_get_bit(struct kempld_device_data *pld, u8 reg, u8 bit)
{
u8 status;
kempld_get_mutex(pld);
status = kempld_read8(pld, reg);
kempld_release_mutex(pld);
return !!(status & (1 << bit));
}
static int kempld_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct kempld_gpio_data *gpio
= container_of(chip, struct kempld_gpio_data, chip);
struct kempld_device_data *pld = gpio->pld;
return kempld_gpio_get_bit(pld, KEMPLD_GPIO_LVL_NUM(offset),
KEMPLD_GPIO_MASK(offset));
}
static void kempld_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct kempld_gpio_data *gpio
= container_of(chip, struct kempld_gpio_data, chip);
struct kempld_device_data *pld = gpio->pld;
kempld_get_mutex(pld);
kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset),
KEMPLD_GPIO_MASK(offset), value);
kempld_release_mutex(pld);
}
static int kempld_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct kempld_gpio_data *gpio
= container_of(chip, struct kempld_gpio_data, chip);
struct kempld_device_data *pld = gpio->pld;
kempld_get_mutex(pld);
kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset),
KEMPLD_GPIO_MASK(offset), 0);
kempld_release_mutex(pld);
return 0;
}
static int kempld_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
struct kempld_gpio_data *gpio
= container_of(chip, struct kempld_gpio_data, chip);
struct kempld_device_data *pld = gpio->pld;
kempld_get_mutex(pld);
kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset),
KEMPLD_GPIO_MASK(offset), value);
kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset),
KEMPLD_GPIO_MASK(offset), 1);
kempld_release_mutex(pld);
return 0;
}
static int kempld_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
{
struct kempld_gpio_data *gpio
= container_of(chip, struct kempld_gpio_data, chip);
struct kempld_device_data *pld = gpio->pld;
return kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset),
KEMPLD_GPIO_MASK(offset));
}
static int kempld_gpio_pincount(struct kempld_device_data *pld)
{
u16 evt, evt_back;
kempld_get_mutex(pld);
/* Backup event register as it might be already initialized */
evt_back = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE);
/* Clear event register */
kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, 0x0000);
/* Read back event register */
evt = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE);
/* Restore event register */
kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, evt_back);
kempld_release_mutex(pld);
return evt ? __ffs(evt) : 16;
}
static int kempld_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct kempld_device_data *pld = dev_get_drvdata(dev->parent);
struct kempld_platform_data *pdata = pld->dev->platform_data;
struct kempld_gpio_data *gpio;
struct gpio_chip *chip;
int ret;
if (pld->info.spec_major < 2) {
dev_err(dev,
"Driver only supports GPIO devices compatible to PLD spec. rev. 2.0 or higher\n");
return -ENODEV;
}
gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
if (gpio == NULL)
return -ENOMEM;
gpio->pld = pld;
platform_set_drvdata(pdev, gpio);
chip = &gpio->chip;
chip->label = "gpio-kempld";
chip->owner = THIS_MODULE;
chip->dev = dev;
chip->can_sleep = 1;
if (pdata && pdata->gpio_base)
chip->base = pdata->gpio_base;
else
chip->base = -1;
chip->direction_input = kempld_gpio_direction_input;
chip->direction_output = kempld_gpio_direction_output;
chip->get_direction = kempld_gpio_get_direction;
chip->get = kempld_gpio_get;
chip->set = kempld_gpio_set;
chip->ngpio = kempld_gpio_pincount(pld);
if (chip->ngpio == 0) {
dev_err(dev, "No GPIO pins detected\n");
return -ENODEV;
}
ret = gpiochip_add(chip);
if (ret) {
dev_err(dev, "Could not register GPIO chip\n");
return ret;
}
dev_info(dev, "GPIO functionality initialized with %d pins\n",
chip->ngpio);
return 0;
}
static int kempld_gpio_remove(struct platform_device *pdev)
{
struct kempld_gpio_data *gpio = platform_get_drvdata(pdev);
return gpiochip_remove(&gpio->chip);
}
static struct platform_driver kempld_gpio_driver = {
.driver = {
.name = "gpio-kempld",
.owner = THIS_MODULE,
},
.probe = kempld_gpio_probe,
.remove = kempld_gpio_remove,
};
module_platform_driver(kempld_gpio_driver);
MODULE_DESCRIPTION("KEM PLD GPIO Driver");
MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:gpio-kempld");