Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-17 17:41:44 +00:00
Code Issues Packages Projects Releases Wiki Activity

[SCSI] qla2xxx: defer topology discovery to DPC thread during initialization.

Browse Source 
Modify intialization semantics:

- perform basic hardware configuration only (as usual)
  - allocate resources
  - load and execute firmware

- defer link (transport) negotiations to the DPC thread
  - again the code in qla2x00_initialize_adapter() to stall probe()
    completion was needed for legacy-style scanning.
  - DPC thread stalls until probe() complete.

- before probe() completes, set DPC flags to perform loop-resync logic
  (similar to what's done during cable-insertion/removal).

Benefits: user does not have to wait 20+ seconds in case the FC cable
is unplugged during driver load, code consolidation (removal of
redundant link negotiation logic during initialize_adaoter()), and
finilly, the driver no longer needs to defer the fc_remote_port_add()
calls to hold off lun-scanning prior to returning from the probe()
function.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
Andrew Vasquez 2006-11-22 08:22:19 -08:00 committed by James Bottomley
parent 1aa8fab2ac
commit d19044c32b
2 changed files with 16 additions and 107 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

94
drivers/scsi/qla2xxx/qla_init.c
View File

@ -59,9 +59,6 @@ int
qla2x00_initialize_adapter(scsi_qla_host_t *ha)
{
int rval;
uint8_t restart_risc = 0;
uint8_t retry;
uint32_t wait_time;
/* Clear adapter flags. */
ha->flags.online = 0;
@ -104,87 +101,15 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
retry = 10;
/*
* Try to configure the loop.
*/
do {
restart_risc = 0;
/* If firmware needs to be loaded */
if (qla2x00_isp_firmware(ha) != QLA_SUCCESS) {
if ((rval = ha->isp_ops.chip_diag(ha)) == QLA_SUCCESS) {
rval = qla2x00_setup_chip(ha);
}
}
if (rval == QLA_SUCCESS &&
(rval = qla2x00_init_rings(ha)) == QLA_SUCCESS) {
check_fw_ready_again:
/*
* Wait for a successful LIP up to a maximum
* of (in seconds): RISC login timeout value,
* RISC retry count value, and port down retry
* value OR a minimum of 4 seconds OR If no
* cable, only 5 seconds.
*/
rval = qla2x00_fw_ready(ha);
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
/* Issue a marker after FW becomes ready. */
qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
/*
* Wait at most MAX_TARGET RSCNs for a stable
* link.
*/
wait_time = 256;
do {
clear_bit(LOOP_RESYNC_NEEDED,
&ha->dpc_flags);
rval = qla2x00_configure_loop(ha);
if (test_and_clear_bit(ISP_ABORT_NEEDED,
&ha->dpc_flags)) {
restart_risc = 1;
break;
}
/*
* If loop state change while we were
* discoverying devices then wait for
* LIP to complete
*/
if (atomic_read(&ha->loop_state) !=
LOOP_READY && retry--) {
goto check_fw_ready_again;
}
wait_time--;
} while (!atomic_read(&ha->loop_down_timer) &&
retry &&
wait_time &&
(test_bit(LOOP_RESYNC_NEEDED,
&ha->dpc_flags)));
if (wait_time == 0)
rval = QLA_FUNCTION_FAILED;
} else if (ha->device_flags & DFLG_NO_CABLE)
/* If no cable, then all is good. */
rval = QLA_SUCCESS;
}
} while (restart_risc && retry--);
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
ha->marker_needed = 0;
ha->flags.online = 1;
} else {
DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));
if (qla2x00_isp_firmware(ha) != QLA_SUCCESS) {
rval = ha->isp_ops.chip_diag(ha);
if (rval)
return (rval);
rval = qla2x00_setup_chip(ha);
if (rval)
return (rval);
}
rval = qla2x00_init_rings(ha);
return (rval);
}
@ -2208,8 +2133,7 @@ qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
atomic_set(&fcport->state, FCS_ONLINE);
if (ha->flags.init_done)
qla2x00_reg_remote_port(ha, fcport);
qla2x00_reg_remote_port(ha, fcport);
}
void

29
drivers/scsi/qla2xxx/qla_os.c
View File

@ -1377,10 +1377,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
struct Scsi_Host *host;
scsi_qla_host_t *ha;
unsigned long flags = 0;
unsigned long wait_switch = 0;
char pci_info[20];
char fw_str[30];
fc_port_t *fcport;
struct scsi_host_template *sht;
if (pci_enable_device(pdev))
@ -1631,24 +1629,15 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->isp_ops.enable_intrs(ha);
/* v2.19.5b6 */
/*
* Wait around max loop_reset_delay secs for the devices to come
* on-line. We don't want Linux scanning before we are ready.
*
*/
for (wait_switch = jiffies + (ha->loop_reset_delay * HZ);
time_before(jiffies,wait_switch) &&
!(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES))
&& (ha->device_flags & SWITCH_FOUND) ;) {
qla2x00_check_fabric_devices(ha);
msleep(10);
}
pci_set_drvdata(pdev, ha);
/* Start link scan. */
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
set_bit(RSCN_UPDATE, &ha->dpc_flags);
ha->flags.init_done = 1;
ha->flags.online = 1;
num_hosts++;
ret = scsi_add_host(host, &pdev->dev);
@ -1669,10 +1658,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
ha->isp_ops.fw_version_str(ha, fw_str));
/* Go with fc_rport registration. */
list_for_each_entry(fcport, &ha->fcports, list)
qla2x00_reg_remote_port(ha, fcport);
return 0;
probe_failed: