Staging tree merge for 3.11-rc1

Here's the large staging tree merge for 3.11-rc1 Huge thing here is the Lustre client code. Unfortunatly, due to it not building properly on a wide variety of different architectures (this was production code???), it is currently disabled from the build so as to not annoy people. Other than Lustre, there are loads of comedi patches, working to clean up that subsystem, iio updates and new drivers, and a load of cleanups from the OPW applicants in their quest to get a summer internship. All of these have been in the linux-next releases for a while (hence the Lustre code being disabled.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEABECAAYFAlHRsacACgkQMUfUDdst+yklBQCgzOUv0SlVYNhRj9KDDu1vxWTG FnYAnRhRG9oXXkocjH6/cu+YOf21ClpZ =WDt3 -----END PGP SIGNATURE----- Merge tag 'staging-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree update from Greg KH: "Here's the large staging tree merge for 3.11-rc1 Huge thing here is the Lustre client code. Unfortunatly, due to it not building properly on a wide variety of different architectures (this was production code???), it is currently disabled from the build so as to not annoy people. Other than Lustre, there are loads of comedi patches, working to clean up that subsystem, iio updates and new drivers, and a load of cleanups from the OPW applicants in their quest to get a summer internship. All of these have been in the linux-next releases for a while (hence the Lustre code being disabled)" Fixed up trivial conflict in drivers/staging/serqt_usb2/serqt_usb2.c due to independent renamings in the staging driver cleanup and the USB tree.. * tag 'staging-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (868 commits) Revert "Revert "Revert "staging/lustre: drop CONFIG_BROKEN dependency""" staging: rtl8192u: fix line length in r819xU_phy.h staging: rtl8192u: rename variables in r819xU_phy.h staging: rtl8192u: fix comments in r819xU_phy.h staging: rtl8192u: fix whitespace in r819xU_phy.h staging: rtl8192u: fix newlines in r819xU_phy.c staging: comedi: unioxx5: use comedi_alloc_spriv() staging: comedi: unioxx5: fix unioxx5_detach() silicom: checkpatch: errors caused by macros Staging: silicom: remove the board_t typedef in bpctl_mod.c Staging: silicom: capitalize labels in the bp_media_type enum Staging: silicom: remove bp_media_type enum typedef staging: rtl8192u: replace msleep(1) with usleep_range() in r819xU_phy.c staging: rtl8192u: rename dwRegRead and rtStatus in r819xU_phy.c staging: rtl8192u: replace __FUNCTION__ in r819xU_phy.c staging: rtl8192u: limit line size in r819xU_phy.c zram: allow request end to coincide with disksize staging: drm/imx: use generic irq chip unused field to block out invalid irqs staging: drm/imx: use generic irqchip staging: drm/imx: ipu-dmfc: use defines for ipu channel numbers ...
2024-11-16 17:12:06 +00:00 · 2013-07-02 11:40:23 -07:00 · 2013-07-02 11:40:23 -07:00 · ce49b6289f
commit ce49b6289f
parent 0de10f9ea6 0ad1ea6954
876 changed files with 280631 additions and 21038 deletions
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@ -690,45 +690,45 @@ Description:
 		Actually start the buffer capture up.  Will start trigger
 		if first device and appropriate.

-What:		/sys/bus/iio/devices/iio:deviceX/buffer/scan_elements
+What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Directory containing interfaces for elements that will be
 		captured for a single triggered sample set in the buffer.

-What:		/sys/.../buffer/scan_elements/in_accel_x_en
-What:		/sys/.../buffer/scan_elements/in_accel_y_en
-What:		/sys/.../buffer/scan_elements/in_accel_z_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_x_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_y_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_z_en
-What:		/sys/.../buffer/scan_elements/in_magn_x_en
-What:		/sys/.../buffer/scan_elements/in_magn_y_en
-What:		/sys/.../buffer/scan_elements/in_magn_z_en
-What:		/sys/.../buffer/scan_elements/in_timestamp_en
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_en
-What:		/sys/.../buffer/scan_elements/in_voltageY_en
-What:		/sys/.../buffer/scan_elements/in_voltageY-voltageZ_en
-What:		/sys/.../buffer/scan_elements/in_incli_x_en
-What:		/sys/.../buffer/scan_elements/in_incli_y_en
-What:		/sys/.../buffer/scan_elements/in_pressureY_en
-What:		/sys/.../buffer/scan_elements/in_pressure_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Scan element control for triggered data capture.

-What:		/sys/.../buffer/scan_elements/in_accel_type
-What:		/sys/.../buffer/scan_elements/in_anglvel_type
-What:		/sys/.../buffer/scan_elements/in_magn_type
-What:		/sys/.../buffer/scan_elements/in_incli_type
-What:		/sys/.../buffer/scan_elements/in_voltageY_type
-What:		/sys/.../buffer/scan_elements/in_voltage_type
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_type
-What:		/sys/.../buffer/scan_elements/in_timestamp_type
-What:		/sys/.../buffer/scan_elements/in_pressureY_type
-What:		/sys/.../buffer/scan_elements/in_pressure_type
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_type
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@ -752,29 +752,29 @@ Description:
 		For other storage combinations this attribute will be extended
 		appropriately.

-What:		/sys/.../buffer/scan_elements/in_accel_type_available
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type_available
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		If the type parameter can take one of a small set of values,
 		this attribute lists them.

-What:		/sys/.../buffer/scan_elements/in_voltageY_index
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_index
-What:		/sys/.../buffer/scan_elements/in_accel_x_index
-What:		/sys/.../buffer/scan_elements/in_accel_y_index
-What:		/sys/.../buffer/scan_elements/in_accel_z_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_x_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_y_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_z_index
-What:		/sys/.../buffer/scan_elements/in_magn_x_index
-What:		/sys/.../buffer/scan_elements/in_magn_y_index
-What:		/sys/.../buffer/scan_elements/in_magn_z_index
-What:		/sys/.../buffer/scan_elements/in_incli_x_index
-What:		/sys/.../buffer/scan_elements/in_incli_y_index
-What:		/sys/.../buffer/scan_elements/in_timestamp_index
-What:		/sys/.../buffer/scan_elements/in_pressureY_index
-What:		/sys/.../buffer/scan_elements/in_pressure_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
--- a/Documentation/devicetree/bindings/iio/dac/ad7303.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ad7303.txt
@ -0,0 +1,23 @@
+Analog Devices AD7303 DAC device driver
+
+Required properties:
+	- compatible: Must be "adi,ad7303"
+	- reg: SPI chip select number for the device
+	- spi-max-frequency: Max SPI frequency to use (< 30000000)
+	- Vdd-supply: Phandle to the Vdd power supply
+
+Optional properties:
+	- REF-supply: Phandle to the external reference voltage supply. This should
+	  only be set if there is an external reference voltage connected to the REF
+	  pin. If the property is not set Vdd/2 is used as the reference voltage.
+
+Example:
+
+		ad7303@4 {
+			compatible = "adi,ad7303";
+			reg = <4>;
+			spi-max-frequency = <10000000>;
+			Vdd-supply = <&vdd_supply>;
+			adi,use-external-reference;
+			REF-supply = <&vref_supply>;
+		};
--- a/Documentation/devicetree/bindings/iio/frequency/adf4350.txt
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4350.txt
@ -0,0 +1,86 @@
+Analog Devices ADF4350/ADF4351 device driver
+
+Required properties:
+	- compatible: Should be one of
+		* "adi,adf4350": When using the ADF4350 device
+		* "adi,adf4351": When using the ADF4351 device
+	- reg: SPI chip select numbert for the device
+	- spi-max-frequency: Max SPI frequency to use (< 20000000)
+	- clocks: From common clock binding. Clock is phandle to clock for
+		ADF435x Reference Clock (CLKIN).
+
+Optional properties:
+	- gpios:	 GPIO Lock detect - If set with a valid phandle and GPIO number,
+			pll lock state is tested upon read.
+	- adi,channel-spacing: Channel spacing in Hz (influences MODULUS).
+	- adi,power-up-frequency:	If set in Hz the PLL tunes to
+			the desired frequency on probe.
+	- adi,reference-div-factor: If set the driver skips dynamic calculation
+			and uses this default value instead.
+	- adi,reference-doubler-enable: Enables reference doubler.
+	- adi,reference-div2-enable: Enables reference divider.
+	- adi,phase-detector-polarity-positive-enable: Enables positive phase
+			detector polarity. Default = negative.
+	- adi,lock-detect-precision-6ns-enable: Enables 6ns lock detect precision.
+			Default = 10ns.
+	- adi,lock-detect-function-integer-n-enable: Enables lock detect
+			for integer-N mode. Default = factional-N mode.
+	- adi,charge-pump-current: Charge pump current in mA.
+			Default = 2500mA.
+	- adi,muxout-select: On chip multiplexer output selection.
+			Valid values for the multiplexer output are:
+			0: Three-State Output (default)
+			1: DVDD
+			2: DGND
+			3: R-Counter output
+			4: N-Divider output
+			5: Analog lock detect
+			6: Digital lock detect
+	- adi,low-spur-mode-enable: Enables low spur mode.
+			Default = Low noise mode.
+	- adi,cycle-slip-reduction-enable: Enables cycle slip reduction.
+	- adi,charge-cancellation-enable: Enabled charge pump
+			charge cancellation for integer-N modes.
+	- adi,anti-backlash-3ns-enable: Enables 3ns antibacklash pulse width
+			 for integer-N modes.
+	- adi,band-select-clock-mode-high-enable: Enables faster band
+			selection logic.
+	- adi,12bit-clk-divider: Clock divider value used when
+			adi,12bit-clkdiv-mode != 0
+	- adi,clk-divider-mode:
+			Valid values for the clkdiv mode are:
+			0: Clock divider off (default)
+			1: Fast lock enable
+			2: Phase resync enable
+	- adi,aux-output-enable: Enables auxiliary RF output.
+	- adi,aux-output-fundamental-enable: Selects fundamental VCO output on
+			the auxiliary RF output. Default = Output of RF dividers.
+	- adi,mute-till-lock-enable: Enables Mute-Till-Lock-Detect function.
+	- adi,output-power: Output power selection.
+			Valid values for the power mode are:
+			0: -4dBm (default)
+			1: -1dBm
+			2: +2dBm
+			3: +5dBm
+	- adi,aux-output-power: Auxiliary output power selection.
+			Valid values for the power mode are:
+			0: -4dBm (default)
+			1: -1dBm
+			2: +2dBm
+			3: +5dBm
+
+
+Example:
+		lo_pll0_rx_adf4351: adf4351-rx-lpc@4 {
+			compatible = "adi,adf4351";
+			reg = <4>;
+			spi-max-frequency = <10000000>;
+			clocks = <&clk0_ad9523 9>;
+			clock-names = "clkin";
+			adi,channel-spacing = <10000>;
+			adi,power-up-frequency = <2400000000>;
+			adi,phase-detector-polarity-positive-enable;
+			adi,charge-pump-current = <2500>;
+			adi,output-power = <3>;
+			adi,mute-till-lock-enable;
+		};
--- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
@ -0,0 +1,18 @@
+* AsahiKASEI AK8975 magnetometer sensor
+
+Required properties:
+
+  - compatible : should be "asahi-kasei,ak8975"
+  - reg : the I2C address of the magnetometer
+
+Optional properties:
+
+  - gpios : should be device tree identifier of the magnetometer DRDY pin
+
+Example:
+
+ak8975@0c {
+        compatible = "asahi-kasei,ak8975";
+        reg = <0x0c>;
+        gpios = <&gpj0 7 0>;
+};
--- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
@ -0,0 +1,99 @@
+Device-Tree bindings for LVDS Display Bridge (ldb)
+
+LVDS Display Bridge
+===================
+
+The LVDS Display Bridge device tree node contains up to two lvds-channel
+nodes describing each of the two LVDS encoder channels of the bridge.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
+                Both LDB versions are similar, but i.MX6 has an additional
+                multiplexer in the front to select any of the four IPU display
+                interfaces as input for each LVDS channel.
+ - gpr : should be <&gpr> on i.MX53 and i.MX6q.
+         The phandle points to the iomuxc-gpr region containing the LVDS
+         control register.
+- clocks, clock-names : phandles to the LDB divider and selector clocks and to
+                        the display interface selector clocks, as described in
+                        Documentation/devicetree/bindings/clock/clock-bindings.txt
+        The following clocks are expected on i.MX53:
+                "di0_pll" - LDB LVDS channel 0 mux
+                "di1_pll" - LDB LVDS channel 1 mux
+                "di0" - LDB LVDS channel 0 gate
+                "di1" - LDB LVDS channel 1 gate
+                "di0_sel" - IPU1 DI0 mux
+                "di1_sel" - IPU1 DI1 mux
+        On i.MX6q the following additional clocks are needed:
+                "di2_sel" - IPU2 DI0 mux
+                "di3_sel" - IPU2 DI1 mux
+        The needed clock numbers for each are documented in
+        Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
+        Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+
+Optional properties:
+ - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
+ - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
+               not used on i.MX6q
+ - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
+   be configured - one input will be distributed on both outputs in dual
+   channel mode
+
+LVDS Channel
+============
+
+Each LVDS Channel has to contain a display-timings node that describes the
+video timings for the connected LVDS display. For detailed information, also
+have a look at Documentation/devicetree/bindings/video/display-timing.txt.
+
+Required properties:
+ - reg : should be <0> or <1>
+ - crtcs : a list of phandles with index pointing to the IPU display interfaces
+           that can be used as video source for this channel.
+ - fsl,data-mapping : should be "spwg" or "jeida"
+                      This describes how the color bits are laid out in the
+                      serialized LVDS signal.
+ - fsl,data-width : should be <18> or <24>
+
+example:
+
+gpr: iomuxc-gpr@53fa8000 {
+	/* ... */
+};
+
+ldb: ldb@53fa8008 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx53-ldb";
+	gpr = <&gpr>;
+	clocks = <&clks 122>, <&clks 120>,
+		 <&clks 115>, <&clks 116>,
+		 <&clks 123>, <&clks 85>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+
+	lvds-channel@0 {
+		reg = <0>;
+		crtcs = <&ipu 0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		display-timings {
+			/* ... */
+		};
+	};
+
+	lvds-channel@1 {
+		reg = <1>;
+		crtcs = <&ipu 1>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		display-timings {
+			/* ... */
+		};
+	};
+};
--- a/2
+++ b/2
@ -7783,7 +7783,7 @@ F:	drivers/staging/media/solo6x10/
 STAGING - SPEAKUP CONSOLE SPEECH DRIVER
 M:	William Hubbs <w.d.hubbs@gmail.com>
 M:	Chris Brannon <chris@the-brannons.com>
-M:	Kirk Reiser <kirk@braille.uwo.ca>
+M:	Kirk Reiser <kirk@reisers.ca>
 M:	Samuel Thibault <samuel.thibault@ens-lyon.org>
 L:	speakup@braille.uwo.ca
 W:	http://www.linux-speakup.org/
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@ -70,5 +70,9 @@ source "drivers/iio/gyro/Kconfig"
 source "drivers/iio/imu/Kconfig"
 source "drivers/iio/light/Kconfig"
 source "drivers/iio/magnetometer/Kconfig"
+if IIO_TRIGGER
+   source "drivers/iio/trigger/Kconfig"
+endif #IIO_TRIGGER
+source "drivers/iio/pressure/Kconfig"

 endif # IIO
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@ -21,3 +21,5 @@ obj-y += frequency/
 obj-y += imu/
 obj-y += light/
 obj-y += magnetometer/
+obj-y += trigger/
+obj-y += pressure/
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@ -28,7 +28,6 @@ config IIO_ST_ACCEL_3AXIS
 	select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
 	select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
 	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
-	select IIO_ST_ACCEL_BUFFER if (IIO_TRIGGERED_BUFFER)
 	help
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@ -26,6 +26,8 @@
 #include <linux/iio/common/st_sensors.h>
 #include "st_accel.h"

+#define ST_ACCEL_NUMBER_DATA_CHANNELS		3
+
 /* DEFAULT VALUE FOR SENSORS */
 #define ST_ACCEL_DEFAULT_OUT_X_L_ADDR		0x28
 #define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR		0x2a
@ -125,22 +127,34 @@
 #define ST_ACCEL_3_MULTIREAD_BIT		false

 static const struct iio_chan_spec st_accel_12bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
-		ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
-		ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
-		ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };

 static const struct iio_chan_spec st_accel_16bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };

@ -442,6 +456,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_accel_common_probe_error;

+	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
 	adata->multiread_bit = adata->sensor->multi_read_bit;
 	indio_dev->channels = adata->sensor->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@ -133,6 +133,16 @@ config MAX1363
 	  max11646, max11647) Provides direct access via sysfs and buffered
 	  data via the iio dev interface.

+config MCP320X
+	tristate "Microchip Technology MCP3204/08"
+	depends on SPI
+	help
+	  Say yes here to build support for Microchip Technology's MCP3204 or
+	  MCP3208 analog to digital converter.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called mcp320x.
+
 config TI_ADC081C
 	tristate "Texas Instruments ADC081C021/027"
 	depends on I2C
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@ -14,6 +14,7 @@ obj-$(CONFIG_AT91_ADC) += at91_adc.o
 obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
 obj-$(CONFIG_MAX1363) += max1363.o
+obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
 obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@ -774,11 +774,13 @@ static int at91_adc_remove(struct platform_device *pdev)
 	return 0;
 }

+#ifdef CONFIG_OF
 static const struct of_device_id at91_adc_dt_ids[] = {
 	{ .compatible = "atmel,at91sam9260-adc" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
+#endif

 static struct platform_driver at91_adc_driver = {
 	.probe = at91_adc_probe,
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@ -270,16 +270,16 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	info = iio_priv(indio_dev);

 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	info->regs = devm_request_and_ioremap(&pdev->dev, mem);
-	if (!info->regs) {
-		ret = -ENOMEM;
+	info->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(info->regs)) {
+		ret = PTR_ERR(info->regs);
 		goto err_iio;
 	}

 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	info->enable_reg = devm_request_and_ioremap(&pdev->dev, mem);
-	if (!info->enable_reg) {
-		ret = -ENOMEM;
+	info->enable_reg = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(info->enable_reg)) {
+		ret = PTR_ERR(info->enable_reg);
 		goto err_iio;
 	}

--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@ -660,7 +660,7 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,
 	unsigned long val;
 	bool found = false;

-	ret = strict_strtoul(buf, 10, &val);
+	ret = kstrtoul(buf, 10, &val);
 	if (ret)
 		return -EINVAL;
 	for (i = 0; i < ARRAY_SIZE(max1363_monitor_speeds); i++)
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@ -0,0 +1,257 @@
+/*
+ * Copyright (C) 2013 Oskar Andero <oskar.andero@gmail.com>
+ *
+ * Driver for Microchip Technology's MCP3204 and MCP3208 ADC chips.
+ * Datasheet can be found here:
+ * http://ww1.microchip.com/downloads/en/devicedoc/21298c.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/regulator/consumer.h>
+
+#define MCP_SINGLE_ENDED	(1 << 3)
+#define MCP_START_BIT		(1 << 4)
+
+enum {
+	mcp3204,
+	mcp3208,
+};
+
+struct mcp320x {
+	struct spi_device *spi;
+	struct spi_message msg;
+	struct spi_transfer transfer[2];
+
+	u8 tx_buf;
+	u8 rx_buf[2];
+
+	struct regulator *reg;
+	struct mutex lock;
+};
+
+static int mcp320x_adc_conversion(struct mcp320x *adc, u8 msg)
+{
+	int ret;
+
+	adc->tx_buf = msg;
+	ret = spi_sync(adc->spi, &adc->msg);
+	if (ret < 0)
+		return ret;
+
+	return ((adc->rx_buf[0] & 0x3f) << 6)  |
+		(adc->rx_buf[1] >> 2);
+}
+
+static int mcp320x_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel, int *val,
+			    int *val2, long mask)
+{
+	struct mcp320x *adc = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	mutex_lock(&adc->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (channel->differential)
+			ret = mcp320x_adc_conversion(adc,
+				MCP_START_BIT | channel->address);
+		else
+			ret = mcp320x_adc_conversion(adc,
+				MCP_START_BIT | MCP_SINGLE_ENDED |
+				channel->address);
+		if (ret < 0)
+			goto out;
+
+		*val = ret;
+		ret = IIO_VAL_INT;
+		break;
+
+	case IIO_CHAN_INFO_SCALE:
+		/* Digital output code = (4096 * Vin) / Vref */
+		ret = regulator_get_voltage(adc->reg);
+		if (ret < 0)
+			goto out;
+
+		*val = ret / 1000;
+		*val2 = 12;
+		ret = IIO_VAL_FRACTIONAL_LOG2;
+		break;
+
+	default:
+		break;
+	}
+
+out:
+	mutex_unlock(&adc->lock);
+
+	return ret;
+}
+
+#define MCP320X_VOLTAGE_CHANNEL(num)				\
+	{							\
+		.type = IIO_VOLTAGE,				\
+		.indexed = 1,					\
+		.channel = (num),				\
+		.address = (num),				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
+	}
+
+#define MCP320X_VOLTAGE_CHANNEL_DIFF(num)			\
+	{							\
+		.type = IIO_VOLTAGE,				\
+		.indexed = 1,					\
+		.channel = (num * 2),				\
+		.channel2 = (num * 2 + 1),			\
+		.address = (num * 2),				\
+		.differential = 1,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
+	}
+
+static const struct iio_chan_spec mcp3204_channels[] = {
+	MCP320X_VOLTAGE_CHANNEL(0),
+	MCP320X_VOLTAGE_CHANNEL(1),
+	MCP320X_VOLTAGE_CHANNEL(2),
+	MCP320X_VOLTAGE_CHANNEL(3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1),
+};
+
+static const struct iio_chan_spec mcp3208_channels[] = {
+	MCP320X_VOLTAGE_CHANNEL(0),
+	MCP320X_VOLTAGE_CHANNEL(1),
+	MCP320X_VOLTAGE_CHANNEL(2),
+	MCP320X_VOLTAGE_CHANNEL(3),
+	MCP320X_VOLTAGE_CHANNEL(4),
+	MCP320X_VOLTAGE_CHANNEL(5),
+	MCP320X_VOLTAGE_CHANNEL(6),
+	MCP320X_VOLTAGE_CHANNEL(7),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(2),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(3),
+};
+
+static const struct iio_info mcp320x_info = {
+	.read_raw = mcp320x_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+struct mcp3208_chip_info {
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+};
+
+static const struct mcp3208_chip_info mcp3208_chip_infos[] = {
+	[mcp3204] = {
+		.channels = mcp3204_channels,
+		.num_channels = ARRAY_SIZE(mcp3204_channels)
+	},
+	[mcp3208] = {
+		.channels = mcp3208_channels,
+		.num_channels = ARRAY_SIZE(mcp3208_channels)
+	},
+};
+
+static int mcp320x_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct mcp320x *adc;
+	const struct mcp3208_chip_info *chip_info;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mcp320x_info;
+
+	chip_info = &mcp3208_chip_infos[spi_get_device_id(spi)->driver_data];
+	indio_dev->channels = chip_info->channels;
+	indio_dev->num_channels = chip_info->num_channels;
+
+	adc->transfer[0].tx_buf = &adc->tx_buf;
+	adc->transfer[0].len = sizeof(adc->tx_buf);
+	adc->transfer[1].rx_buf = adc->rx_buf;
+	adc->transfer[1].len = sizeof(adc->rx_buf);
+
+	spi_message_init_with_transfers(&adc->msg, adc->transfer,
+					ARRAY_SIZE(adc->transfer));
+
+	adc->reg = regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg)) {
+		ret = PTR_ERR(adc->reg);
+		goto iio_free;
+	}
+
+	ret = regulator_enable(adc->reg);
+	if (ret < 0)
+		goto reg_free;
+
+	mutex_init(&adc->lock);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto reg_disable;
+
+	return 0;
+
+reg_disable:
+	regulator_disable(adc->reg);
+reg_free:
+	regulator_put(adc->reg);
+iio_free:
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static int mcp320x_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct mcp320x *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+	regulator_put(adc->reg);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id mcp320x_id[] = {
+	{ "mcp3204", mcp3204 },
+	{ "mcp3208", mcp3208 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, mcp320x_id);
+
+static struct spi_driver mcp320x_driver = {
+	.driver = {
+		.name = "mcp320x",
+		.owner = THIS_MODULE,
+	},
+	.probe = mcp320x_probe,
+	.remove = mcp320x_remove,
+	.id_table = mcp320x_id,
+};
+module_spi_driver(mcp320x_driver);
+
+MODULE_AUTHOR("Oskar Andero <oskar.andero@gmail.com>");
+MODULE_DESCRIPTION("Microchip Technology MCP3204/08");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/common/st_sensors/st_sensors_buffer.c
+++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
@ -24,11 +24,20 @@

 int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
 {
+	u8 *addr;
 	int i, n = 0, len;
-	u8 addr[ST_SENSORS_NUMBER_DATA_CHANNELS];
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	unsigned int num_data_channels = sdata->num_data_channels;
+	unsigned int byte_for_channel =
+			indio_dev->channels[0].scan_type.storagebits >> 3;

-	for (i = 0; i < ST_SENSORS_NUMBER_DATA_CHANNELS; i++) {
+	addr = kmalloc(num_data_channels, GFP_KERNEL);
+	if (!addr) {
+		len = -ENOMEM;
+		goto st_sensors_get_buffer_element_error;
+	}
+
+	for (i = 0; i < num_data_channels; i++) {
 		if (test_bit(i, indio_dev->active_scan_mask)) {
 			addr[n] = indio_dev->channels[i].address;
 			n++;
@ -37,52 +46,58 @@ int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
 	switch (n) {
 	case 1:
 		len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
-			addr[0], ST_SENSORS_BYTE_FOR_CHANNEL, buf,
-			sdata->multiread_bit);
+			addr[0], byte_for_channel, buf, sdata->multiread_bit);
 		break;
 	case 2:
-		if ((addr[1] - addr[0]) == ST_SENSORS_BYTE_FOR_CHANNEL) {
+		if ((addr[1] - addr[0]) == byte_for_channel) {
 			len = sdata->tf->read_multiple_byte(&sdata->tb,
-					sdata->dev, addr[0],
-					ST_SENSORS_BYTE_FOR_CHANNEL*n,
+				sdata->dev, addr[0], byte_for_channel * n,
 				buf, sdata->multiread_bit);
 		} else {
-			u8 rx_array[ST_SENSORS_BYTE_FOR_CHANNEL*
-				    ST_SENSORS_NUMBER_DATA_CHANNELS];
+			u8 *rx_array;
+			rx_array = kmalloc(byte_for_channel * num_data_channels,
+					   GFP_KERNEL);
+			if (!rx_array) {
+				len = -ENOMEM;
+				goto st_sensors_free_memory;
+			}
+
 			len = sdata->tf->read_multiple_byte(&sdata->tb,
 				sdata->dev, addr[0],
-				ST_SENSORS_BYTE_FOR_CHANNEL*
-				ST_SENSORS_NUMBER_DATA_CHANNELS,
+				byte_for_channel * num_data_channels,
 				rx_array, sdata->multiread_bit);
-			if (len < 0)
-				goto read_data_channels_error;
+			if (len < 0) {
+				kfree(rx_array);
+				goto st_sensors_free_memory;
+			}

-			for (i = 0; i < n * ST_SENSORS_NUMBER_DATA_CHANNELS;
-									i++) {
+			for (i = 0; i < n * num_data_channels; i++) {
 				if (i < n)
 					buf[i] = rx_array[i];
 				else
 					buf[i] = rx_array[n + i];
 			}
-			len = ST_SENSORS_BYTE_FOR_CHANNEL*n;
+			kfree(rx_array);
+			len = byte_for_channel * n;
 		}
 		break;
 	case 3:
 		len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
-			addr[0], ST_SENSORS_BYTE_FOR_CHANNEL*
-			ST_SENSORS_NUMBER_DATA_CHANNELS,
+			addr[0], byte_for_channel * num_data_channels,
 			buf, sdata->multiread_bit);
 		break;
 	default:
 		len = -EINVAL;
-		goto read_data_channels_error;
+		goto st_sensors_free_memory;
 	}
-	if (len != ST_SENSORS_BYTE_FOR_CHANNEL*n) {
+	if (len != byte_for_channel * n) {
 		len = -EIO;
-		goto read_data_channels_error;
+		goto st_sensors_free_memory;
 	}

-read_data_channels_error:
+st_sensors_free_memory:
+	kfree(addr);
+st_sensors_get_buffer_element_error:
 	return len;
 }
 EXPORT_SYMBOL(st_sensors_get_buffer_element);
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@ -20,6 +20,11 @@

 #define ST_SENSORS_WAI_ADDRESS		0x0f

+static inline u32 st_sensors_get_unaligned_le24(const u8 *p)
+{
+	return ((s32)((p[0] | p[1] << 8 | p[2] << 16) << 8) >> 8);
+}
+
 static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
 						u8 reg_addr, u8 mask, u8 data)
 {
@ -112,7 +117,8 @@ st_sensors_match_odr_error:
 	return ret;
 }

-static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
+static int st_sensors_set_fullscale(struct iio_dev *indio_dev,
+							unsigned int fs)
 {
 	int err, i = 0;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
@ -273,21 +279,33 @@ st_sensors_match_scale_error:
 EXPORT_SYMBOL(st_sensors_set_fullscale_by_gain);

 static int st_sensors_read_axis_data(struct iio_dev *indio_dev,
-							u8 ch_addr, int *data)
+				struct iio_chan_spec const *ch, int *data)
 {
 	int err;
-	u8 outdata[ST_SENSORS_BYTE_FOR_CHANNEL];
+	u8 *outdata;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	unsigned int byte_for_channel = ch->scan_type.storagebits >> 3;
+
+	outdata = kmalloc(byte_for_channel, GFP_KERNEL);
+	if (!outdata) {
+		err = -EINVAL;
+		goto st_sensors_read_axis_data_error;
+	}

 	err = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
-				ch_addr, ST_SENSORS_BYTE_FOR_CHANNEL,
+				ch->address, byte_for_channel,
 				outdata, sdata->multiread_bit);
 	if (err < 0)
-		goto read_error;
+		goto st_sensors_free_memory;

+	if (byte_for_channel == 2)
 		*data = (s16)get_unaligned_le16(outdata);
+	else if (byte_for_channel == 3)
+		*data = (s32)st_sensors_get_unaligned_le24(outdata);

-read_error:
+st_sensors_free_memory:
+	kfree(outdata);
+st_sensors_read_axis_data_error:
 	return err;
 }

@ -307,7 +325,7 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 			goto read_error;

 		msleep((sdata->sensor->bootime * 1000) / sdata->odr);
-		err = st_sensors_read_axis_data(indio_dev, ch->address, val);
+		err = st_sensors_read_axis_data(indio_dev, ch, val);
 		if (err < 0)
 			goto read_error;

--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@ -130,6 +130,16 @@ config AD5686
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5686.

+config AD7303
+	tristate "Analog Devices Analog Devices AD7303 DAC driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices AD7303 Digital to Analog
+	  Converters (DAC).
+
+	  To compile this driver as module choose M here: the module will be called
+	  ad7303.
+
 config MAX517
 	tristate "Maxim MAX517/518/519 DAC driver"
 	depends on I2C
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@ -14,5 +14,6 @@ obj-$(CONFIG_AD5755) += ad5755.o
 obj-$(CONFIG_AD5764) += ad5764.o
 obj-$(CONFIG_AD5791) += ad5791.o
 obj-$(CONFIG_AD5686) += ad5686.o
+obj-$(CONFIG_AD7303) += ad7303.o
 obj-$(CONFIG_MAX517) += max517.o
 obj-$(CONFIG_MCP4725) += mcp4725.o
--- a/drivers/iio/dac/ad7303.c
+++ b/drivers/iio/dac/ad7303.c
@ -0,0 +1,315 @@
+/*
+ * AD7303 Digital to analog converters driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/platform_data/ad7303.h>
+
+#define AD7303_CFG_EXTERNAL_VREF BIT(15)
+#define AD7303_CFG_POWER_DOWN(ch) BIT(11 + (ch))
+#define AD7303_CFG_ADDR_OFFSET	10
+
+#define AD7303_CMD_UPDATE_DAC	(0x3 << 8)
+
+/**
+ * struct ad7303_state - driver instance specific data
+ * @spi:		the device for this driver instance
+ * @config:		cached config register value
+ * @dac_cache:		current DAC raw value (chip does not support readback)
+ * @data:		spi transfer buffer
+ */
+
+struct ad7303_state {
+	struct spi_device *spi;
+	uint16_t config;
+	uint8_t dac_cache[2];
+
+	struct regulator *vdd_reg;
+	struct regulator *vref_reg;
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	__be16 data ____cacheline_aligned;
+};
+
+static int ad7303_write(struct ad7303_state *st, unsigned int chan,
+	uint8_t val)
+{
+	st->data = cpu_to_be16(AD7303_CMD_UPDATE_DAC |
+		(chan << AD7303_CFG_ADDR_OFFSET) |
+		st->config | val);
+
+	return spi_write(st->spi, &st->data, sizeof(st->data));
+}
+
+static ssize_t ad7303_read_dac_powerdown(struct iio_dev *indio_dev,
+	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
+{
+	struct ad7303_state *st = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", (bool)(st->config &
+		AD7303_CFG_POWER_DOWN(chan->channel)));
+}
+
+static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
+	 uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
+	 size_t len)
+{
+	struct ad7303_state *st = iio_priv(indio_dev);
+	bool pwr_down;
+	int ret;
+
+	ret = strtobool(buf, &pwr_down);
+	if (ret)
+		return ret;
+
+	mutex_lock(&indio_dev->mlock);
+
+	if (pwr_down)
+		st->config |= AD7303_CFG_POWER_DOWN(chan->channel);
+	else
+		st->config &= ~AD7303_CFG_POWER_DOWN(chan->channel);
+
+	/* There is no noop cmd which allows us to only update the powerdown
+	 * mode, so just write one of the DAC channels again */
+	ad7303_write(st, chan->channel, st->dac_cache[chan->channel]);
+
+	mutex_unlock(&indio_dev->mlock);
+	return ret ? ret : len;
+}
+
+static int ad7303_get_vref(struct ad7303_state *st,
+	struct iio_chan_spec const *chan)
+{
+	int ret;
+
+	if (st->config & AD7303_CFG_EXTERNAL_VREF)
+		return regulator_get_voltage(st->vref_reg);
+
+	ret = regulator_get_voltage(st->vdd_reg);
+	if (ret < 0)
+		return ret;
+	return ret / 2;
+}
+
+static int ad7303_read_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *chan, int *val, int *val2, long info)
+{
+	struct ad7303_state *st = iio_priv(indio_dev);
+	int vref_uv;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		*val = st->dac_cache[chan->channel];
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		vref_uv = ad7303_get_vref(st, chan);
+		if (vref_uv < 0)
+			return vref_uv;
+
+		*val = 2 * vref_uv / 1000;
+		*val2 = chan->scan_type.realbits;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		break;
+	}
+	return -EINVAL;
+}
+
+static int ad7303_write_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+	struct ad7303_state *st = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (val >= (1 << chan->scan_type.realbits) || val < 0)
+			return -EINVAL;
+
+		mutex_lock(&indio_dev->mlock);
+		ret = ad7303_write(st, chan->address, val);
+		if (ret == 0)
+			st->dac_cache[chan->channel] = val;
+		mutex_unlock(&indio_dev->mlock);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct iio_info ad7303_info = {
+	.read_raw = ad7303_read_raw,
+	.write_raw = ad7303_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static const struct iio_chan_spec_ext_info ad7303_ext_info[] = {
+	{
+		.name = "powerdown",
+		.read = ad7303_read_dac_powerdown,
+		.write = ad7303_write_dac_powerdown,
+	},
+	{ },
+};
+
+#define AD7303_CHANNEL(chan) {					\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.output = 1,						\
+	.channel = (chan),					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.address = (chan),					\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = '8',				\
+		.storagebits = '8',				\
+		.shift = '0',					\
+	},							\
+	.ext_info = ad7303_ext_info,				\
+}
+
+static const struct iio_chan_spec ad7303_channels[] = {
+	AD7303_CHANNEL(0),
+	AD7303_CHANNEL(1),
+};
+
+static int ad7303_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct iio_dev *indio_dev;
+	struct ad7303_state *st;
+	bool ext_ref;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	spi_set_drvdata(spi, indio_dev);
+
+	st->spi = spi;
+
+	st->vdd_reg = regulator_get(&spi->dev, "Vdd");
+	if (IS_ERR(st->vdd_reg)) {
+		ret = PTR_ERR(st->vdd_reg);
+		goto err_free;
+	}
+
+	ret = regulator_enable(st->vdd_reg);
+	if (ret)
+		goto err_put_vdd_reg;
+
+	if (spi->dev.of_node) {
+		ext_ref = of_property_read_bool(spi->dev.of_node,
+				"REF-supply");
+	} else {
+		struct ad7303_platform_data *pdata = spi->dev.platform_data;
+		if (pdata && pdata->use_external_ref)
+			ext_ref = true;
+		else
+		    ext_ref = false;
+	}
+
+	if (ext_ref) {
+		st->vref_reg = regulator_get(&spi->dev, "REF");
+		if (IS_ERR(st->vref_reg))
+			goto err_disable_vdd_reg;
+
+		ret = regulator_enable(st->vref_reg);
+		if (ret)
+			goto err_put_vref_reg;
+
+		st->config |= AD7303_CFG_EXTERNAL_VREF;
+	}
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = id->name;
+	indio_dev->info = &ad7303_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ad7303_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ad7303_channels);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto err_disable_vref_reg;
+
+	return 0;
+
+err_disable_vref_reg:
+	if (st->vref_reg)
+		regulator_disable(st->vref_reg);
+err_put_vref_reg:
+	if (st->vref_reg)
+		regulator_put(st->vref_reg);
+err_disable_vdd_reg:
+	regulator_disable(st->vdd_reg);
+err_put_vdd_reg:
+	regulator_put(st->vdd_reg);
+err_free:
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static int ad7303_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ad7303_state *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	if (st->vref_reg) {
+		regulator_disable(st->vref_reg);
+		regulator_put(st->vref_reg);
+	}
+	regulator_disable(st->vdd_reg);
+	regulator_put(st->vdd_reg);
+
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id ad7303_spi_ids[] = {
+	{ "ad7303", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad7303_spi_ids);
+
+static struct spi_driver ad7303_driver = {
+	.driver = {
+		.name = "ad7303",
+		.owner = THIS_MODULE,
+	},
+	.probe = ad7303_probe,
+	.remove = ad7303_remove,
+	.id_table = ad7303_spi_ids,
+};
+module_spi_driver(ad7303_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices AD7303 DAC driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/frequency/adf4350.c
+++ b/drivers/iio/frequency/adf4350.c
@ -1,7 +1,7 @@
 /*
 * ADF4350/ADF4351 SPI Wideband Synthesizer driver
 *
- * Copyright 2012 Analog Devices Inc.
+ * Copyright 2012-2013 Analog Devices Inc.
 *
 * Licensed under the GPL-2.
 */
@ -17,6 +17,9 @@
 #include <linux/gcd.h>
 #include <linux/gpio.h>
 #include <asm/div64.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>

 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@ -33,6 +36,7 @@ struct adf4350_state {
 	struct spi_device		*spi;
 	struct regulator		*reg;
 	struct adf4350_platform_data	*pdata;
+	struct clk			*clk;
 	unsigned long			clkin;
 	unsigned long			chspc; /* Channel Spacing */
 	unsigned long			fpfd; /* Phase Frequency Detector */
@ -43,7 +47,7 @@ struct adf4350_state {
 	unsigned			r4_rf_div_sel;
 	unsigned long			regs[6];
 	unsigned long			regs_hw[6];
-
+	unsigned long long		freq_req;
 	/*
 	 * DMA (thus cache coherency maintenance) requires the
 	 * transfer buffers to live in their own cache lines.
@ -52,7 +56,6 @@ struct adf4350_state {
 };

 static struct adf4350_platform_data default_pdata = {
-	.clkin = 122880000,
 	.channel_spacing = 10000,
 	.r2_user_settings = ADF4350_REG2_PD_POLARITY_POS |
 			    ADF4350_REG2_CHARGE_PUMP_CURR_uA(2500),
@ -235,6 +238,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq)
 		ADF4350_REG4_MUTE_TILL_LOCK_EN));

 	st->regs[ADF4350_REG5] = ADF4350_REG5_LD_PIN_MODE_DIGITAL;
+	st->freq_req = freq;

 	return adf4350_sync_config(st);
 }
@ -246,6 +250,7 @@ static ssize_t adf4350_write(struct iio_dev *indio_dev,
 {
 	struct adf4350_state *st = iio_priv(indio_dev);
 	unsigned long long readin;
+	unsigned long tmp;
 	int ret;

 	ret = kstrtoull(buf, 10, &readin);
@ -258,10 +263,23 @@ static ssize_t adf4350_write(struct iio_dev *indio_dev,
 		ret = adf4350_set_freq(st, readin);
 		break;
 	case ADF4350_FREQ_REFIN:
-		if (readin > ADF4350_MAX_FREQ_REFIN)
+		if (readin > ADF4350_MAX_FREQ_REFIN) {
 			ret = -EINVAL;
-		else
+			break;
+		}
+
+		if (st->clk) {
+			tmp = clk_round_rate(st->clk, readin);
+			if (tmp != readin) {
+				ret = -EINVAL;
+				break;
+			}
+			ret = clk_set_rate(st->clk, tmp);
+			if (ret < 0)
+				break;
+		}
 		st->clkin = readin;
+		ret = adf4350_set_freq(st, st->freq_req);
 		break;
 	case ADF4350_FREQ_RESOLUTION:
 		if (readin == 0)
@ -308,6 +326,9 @@ static ssize_t adf4350_read(struct iio_dev *indio_dev,
 			}
 		break;
 	case ADF4350_FREQ_REFIN:
+		if (st->clk)
+			st->clkin = clk_get_rate(st->clk);
+
 		val = st->clkin;
 		break;
 	case ADF4350_FREQ_RESOLUTION:
@ -318,6 +339,7 @@ static ssize_t adf4350_read(struct iio_dev *indio_dev,
 		break;
 	default:
 		ret = -EINVAL;
+		val = 0;
 	}
 	mutex_unlock(&indio_dev->mlock);

@ -355,19 +377,153 @@ static const struct iio_info adf4350_info = {
 	.driver_module = THIS_MODULE,
 };

+#ifdef CONFIG_OF
+static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct adf4350_platform_data *pdata;
+	unsigned int tmp;
+	int ret;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "could not allocate memory for platform data\n");
+		return NULL;
+	}
+
+	strncpy(&pdata->name[0], np->name, SPI_NAME_SIZE - 1);
+
+	tmp = 10000;
+	of_property_read_u32(np, "adi,channel-spacing", &tmp);
+	pdata->channel_spacing = tmp;
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,power-up-frequency", &tmp);
+	pdata->power_up_frequency = tmp;
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,reference-div-factor", &tmp);
+	pdata->ref_div_factor = tmp;
+
+	ret = of_get_gpio(np, 0);
+	if (ret < 0)
+		pdata->gpio_lock_detect = -1;
+	else
+		pdata->gpio_lock_detect = ret;
+
+	pdata->ref_doubler_en = of_property_read_bool(np,
+			"adi,reference-doubler-enable");
+	pdata->ref_div2_en = of_property_read_bool(np,
+			"adi,reference-div2-enable");
+
+	/* r2_user_settings */
+	pdata->r2_user_settings = of_property_read_bool(np,
+			"adi,phase-detector-polarity-positive-enable") ?
+			ADF4350_REG2_PD_POLARITY_POS : 0;
+	pdata->r2_user_settings |= of_property_read_bool(np,
+			"adi,lock-detect-precision-6ns-enable") ?
+			ADF4350_REG2_LDP_6ns : 0;
+	pdata->r2_user_settings |= of_property_read_bool(np,
+			"adi,lock-detect-function-integer-n-enable") ?
+			ADF4350_REG2_LDF_INT_N : 0;
+
+	tmp = 2500;
+	of_property_read_u32(np, "adi,charge-pump-current", &tmp);
+	pdata->r2_user_settings |= ADF4350_REG2_CHARGE_PUMP_CURR_uA(tmp);
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,muxout-select", &tmp);
+	pdata->r2_user_settings |= ADF4350_REG2_MUXOUT(tmp);
+
+	pdata->r2_user_settings |= of_property_read_bool(np,
+			"adi,low-spur-mode-enable") ?
+			ADF4350_REG2_NOISE_MODE(0x3) : 0;
+
+	/* r3_user_settings */
+
+	pdata->r3_user_settings = of_property_read_bool(np,
+			"adi,cycle-slip-reduction-enable") ?
+			ADF4350_REG3_12BIT_CSR_EN : 0;
+	pdata->r3_user_settings |= of_property_read_bool(np,
+			"adi,charge-cancellation-enable") ?
+			ADF4351_REG3_CHARGE_CANCELLATION_EN : 0;
+
+	pdata->r3_user_settings |= of_property_read_bool(np,
+			"adi,anti-backlash-3ns-enable") ?
+			ADF4351_REG3_ANTI_BACKLASH_3ns_EN : 0;
+	pdata->r3_user_settings |= of_property_read_bool(np,
+			"adi,band-select-clock-mode-high-enable") ?
+			ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH : 0;
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,12bit-clk-divider", &tmp);
+	pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV(tmp);
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,clk-divider-mode", &tmp);
+	pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV_MODE(tmp);
+
+	/* r4_user_settings */
+
+	pdata->r4_user_settings = of_property_read_bool(np,
+			"adi,aux-output-enable") ?
+			ADF4350_REG4_AUX_OUTPUT_EN : 0;
+	pdata->r4_user_settings |= of_property_read_bool(np,
+			"adi,aux-output-fundamental-enable") ?
+			ADF4350_REG4_AUX_OUTPUT_FUND : 0;
+	pdata->r4_user_settings |= of_property_read_bool(np,
+			"adi,mute-till-lock-enable") ?
+			ADF4350_REG4_MUTE_TILL_LOCK_EN : 0;
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,output-power", &tmp);
+	pdata->r4_user_settings |= ADF4350_REG4_OUTPUT_PWR(tmp);
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,aux-output-power", &tmp);
+	pdata->r4_user_settings |= ADF4350_REG4_AUX_OUTPUT_PWR(tmp);
+
+	return pdata;
+}
+#else
+static
+struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
 static int adf4350_probe(struct spi_device *spi)
 {
-	struct adf4350_platform_data *pdata = spi->dev.platform_data;
+	struct adf4350_platform_data *pdata;
 	struct iio_dev *indio_dev;
 	struct adf4350_state *st;
+	struct clk *clk = NULL;
 	int ret;

+	if (spi->dev.of_node) {
+		pdata = adf4350_parse_dt(&spi->dev);
+		if (pdata == NULL)
+			return -EINVAL;
+	} else {
+		pdata = spi->dev.platform_data;
+	}
+
 	if (!pdata) {
 		dev_warn(&spi->dev, "no platform data? using default\n");
-
 		pdata = &default_pdata;
 	}

+	if (!pdata->clkin) {
+		clk = clk_get(&spi->dev, "clkin");
+		if (IS_ERR(clk))
+			return -EPROBE_DEFER;
+
+		ret = clk_prepare_enable(clk);
+		if (ret < 0)
+			return ret;
+	}
+
 	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
@ -395,7 +551,12 @@ static int adf4350_probe(struct spi_device *spi)
 	indio_dev->num_channels = 1;

 	st->chspc = pdata->channel_spacing;
+	if (clk) {
+		st->clk = clk;
+		st->clkin = clk_get_rate(clk);
+	} else {
 		st->clkin = pdata->clkin;
+	}

 	st->min_out_freq = spi_get_device_id(spi)->driver_data == 4351 ?
 		ADF4351_MIN_OUT_FREQ : ADF4350_MIN_OUT_FREQ;
@ -435,6 +596,8 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);

+	if (clk)
+		clk_disable_unprepare(clk);
 	iio_device_free(indio_dev);

 	return ret;
@ -451,6 +614,9 @@ static int adf4350_remove(struct spi_device *spi)

 	iio_device_unregister(indio_dev);

+	if (st->clk)
+		clk_disable_unprepare(st->clk);
+
 	if (!IS_ERR(reg)) {
 		regulator_disable(reg);
 		regulator_put(reg);
@ -481,6 +647,6 @@ static struct spi_driver adf4350_driver = {
 };
 module_spi_driver(adf4350_driver);

-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
 MODULE_DESCRIPTION("Analog Devices ADF4350/ADF4351 PLL");
 MODULE_LICENSE("GPL v2");
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@ -10,6 +10,13 @@ config ADIS16080
 	  Say yes here to build support for Analog Devices ADIS16080, ADIS16100 Yaw
 	  Rate Gyroscope with SPI.

+config ADIS16130
+	tristate "Analog Devices ADIS16130 High Precision Angular Rate Sensor driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices ADIS16130 High Precision
+	  Angular Rate Sensor driver.
+
 config ADIS16136
 	tristate "Analog devices ADIS16136 and similar gyroscopes driver"
 	depends on SPI_MASTER
@ -47,7 +54,6 @@ config IIO_ST_GYRO_3AXIS
 	select IIO_ST_GYRO_I2C_3AXIS if (I2C)
 	select IIO_ST_GYRO_SPI_3AXIS if (SPI_MASTER)
 	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
-	select IIO_ST_GYRO_BUFFER if (IIO_TRIGGERED_BUFFER)
 	help
 	  Say yes here to build support for STMicroelectronics gyroscopes:
 	  L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330.
--- a/drivers/iio/gyro/Makefile
+++ b/drivers/iio/gyro/Makefile
@ -3,6 +3,7 @@
 #

 obj-$(CONFIG_ADIS16080) += adis16080.o
+obj-$(CONFIG_ADIS16130) += adis16130.o
 obj-$(CONFIG_ADIS16136) += adis16136.o
 obj-$(CONFIG_ADXRS450) += adxrs450.o

--- a/drivers/staging/iio/gyro/adis16130_core.c
+++ b/drivers/staging/iio/gyro/adis16130_core.c
@ -6,18 +6,12 @@
 * Licensed under the GPL-2 or later.
 */

-#include <linux/delay.h>
 #include <linux/mutex.h>
-#include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/list.h>
 #include <linux/module.h>

 #include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>

 #define ADIS16130_CON         0x0
 #define ADIS16130_CON_RD      (1 << 6)
@ -68,7 +62,6 @@ static int adis16130_spi_read(struct iio_dev *indio_dev, u8 reg_addr, u32 *val)
 	spi_message_init(&msg);
 	spi_message_add_tail(&xfer, &msg);
 	ret = spi_sync(st->us, &msg);
-	ret = spi_read(st->us, st->buf, 4);

 	if (ret == 0)
 		*val = (st->buf[1] << 16) | (st->buf[2] << 8) | st->buf[3];
@ -85,6 +78,8 @@ static int adis16130_read_raw(struct iio_dev *indio_dev,
 	int ret;
 	u32 temp;

+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
 		/* Take the iio_dev status lock */
 		mutex_lock(&indio_dev->mlock);
 		ret = adis16130_spi_read(indio_dev, chan->address, &temp);
@ -93,6 +88,37 @@ static int adis16130_read_raw(struct iio_dev *indio_dev,
 			return ret;
 		*val = temp;
 		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			/* 0 degree = 838860, 250 degree = 14260608 */
+			*val = 250;
+			*val2 = 336440817; /* RAD_TO_DEGREE(14260608 - 8388608) */
+			return IIO_VAL_FRACTIONAL;
+		case IIO_TEMP:
+			/* 0C = 8036283, 105C = 9516048 */
+			*val = 105000;
+			*val2 = 9516048 - 8036283;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = -8388608;
+			return IIO_VAL_INT;
+		case IIO_TEMP:
+			*val = -8036283;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+		break;
+	}
+
+	return -EINVAL;
 }

 static const struct iio_chan_spec adis16130_channels[] = {
@ -100,13 +126,17 @@ static const struct iio_chan_spec adis16130_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
 		.address = ADIS16130_RATEDATA,
 	}, {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
 		.address = ADIS16130_TEMPDATA,
 	}
 };
@ -153,7 +183,6 @@ error_ret:
 	return ret;
 }

-/* fixme, confirm ordering in this function */
 static int adis16130_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@ -27,6 +27,8 @@
 #include <linux/iio/common/st_sensors.h>
 #include "st_gyro.h"

+#define ST_GYRO_NUMBER_DATA_CHANNELS		3
+
 /* DEFAULT VALUE FOR SENSORS */
 #define ST_GYRO_DEFAULT_OUT_X_L_ADDR		0x28
 #define ST_GYRO_DEFAULT_OUT_Y_L_ADDR		0x2a
@ -86,14 +88,17 @@
 #define ST_GYRO_2_MULTIREAD_BIT			true

 static const struct iio_chan_spec st_gyro_16bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_X,
-		IIO_MOD_X, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
+	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
 			ST_GYRO_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Y,
-		IIO_MOD_Y, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
+	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
 			ST_GYRO_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Z,
-		IIO_MOD_Z, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
+	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
 			ST_GYRO_DEFAULT_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
@ -310,6 +315,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_gyro_common_probe_error;

+	gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
 	gdata->multiread_bit = gdata->sensor->multi_read_bit;
 	indio_dev->channels = gdata->sensor->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@ -542,8 +542,7 @@ int iio_update_buffers(struct iio_dev *indio_dev,
 		ret = indio_dev->setup_ops->preenable(indio_dev);
 		if (ret) {
 			printk(KERN_ERR
-			       "Buffer not started:"
-			       "buffer preenable failed\n");
+			       "Buffer not started: buffer preenable failed (%d)\n", ret);
 			goto error_remove_inserted;
 		}
 	}
@ -556,8 +555,7 @@ int iio_update_buffers(struct iio_dev *indio_dev,
 			ret = buffer->access->request_update(buffer);
 			if (ret) {
 				printk(KERN_INFO
-				       "Buffer not started:"
-				       "buffer parameter update failed\n");
+				       "Buffer not started: buffer parameter update failed (%d)\n", ret);
 				goto error_run_postdisable;
 			}
 		}
@ -566,7 +564,7 @@ int iio_update_buffers(struct iio_dev *indio_dev,
 			->update_scan_mode(indio_dev,
 					   indio_dev->active_scan_mask);
 		if (ret < 0) {
-			printk(KERN_INFO "update scan mode failed\n");
+			printk(KERN_INFO "Buffer not started: update scan mode failed (%d)\n", ret);
 			goto error_run_postdisable;
 		}
 	}
@ -590,7 +588,7 @@ int iio_update_buffers(struct iio_dev *indio_dev,
 		ret = indio_dev->setup_ops->postenable(indio_dev);
 		if (ret) {
 			printk(KERN_INFO
-			       "Buffer not started: postenable failed\n");
+			       "Buffer not started: postenable failed (%d)\n", ret);
 			indio_dev->currentmode = INDIO_DIRECT_MODE;
 			if (indio_dev->setup_ops->postdisable)
 				indio_dev->setup_ops->postdisable(indio_dev);
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@ -31,7 +31,7 @@
 #include "../common/hid-sensors/hid-sensor-trigger.h"

 /*Format: HID-SENSOR-usage_id_in_hex*/
-/*Usage ID from spec for Accelerometer-3D: 0x200041*/
+/*Usage ID from spec for Ambiant-Light: 0x200041*/
 #define DRIVER_NAME "HID-SENSOR-200041"

 #define CHANNEL_SCAN_INDEX_ILLUM 0
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@ -32,7 +32,6 @@ config IIO_ST_MAGN_3AXIS
 	select IIO_ST_MAGN_I2C_3AXIS if (I2C)
 	select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER)
 	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
-	select IIO_ST_MAGN_BUFFER if (IIO_TRIGGERED_BUFFER)
 	help
 	  Say yes here to build support for STMicroelectronics magnetometers:
 	  LSM303DLHC, LSM303DLM, LIS3MDL.
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@ -24,11 +24,13 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
-
+#include <linux/bitops.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>

 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@ -82,6 +84,7 @@
 */
 #define AK8975_MAX_CONVERSION_TIMEOUT	500
 #define AK8975_CONVERSION_DONE_POLL_TIME 10
+#define AK8975_DATA_READY_TIMEOUT	((100*HZ)/1000)

 /*
 * Per-instance context data for the device.
@ -94,6 +97,9 @@ struct ak8975_data {
 	long			raw_to_gauss[3];
 	u8			reg_cache[AK8975_MAX_REGS];
 	int			eoc_gpio;
+	int			eoc_irq;
+	wait_queue_head_t	data_ready_queue;
+	unsigned long		flags;
 };

 static const int ak8975_index_to_reg[] = {
@ -122,6 +128,51 @@ static int ak8975_write_data(struct i2c_client *client,
 	return 0;
 }

+/*
+ * Handle data ready irq
+ */
+static irqreturn_t ak8975_irq_handler(int irq, void *data)
+{
+	struct ak8975_data *ak8975 = data;
+
+	set_bit(0, &ak8975->flags);
+	wake_up(&ak8975->data_ready_queue);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Install data ready interrupt handler
+ */
+static int ak8975_setup_irq(struct ak8975_data *data)
+{
+	struct i2c_client *client = data->client;
+	int rc;
+	int irq;
+
+	if (client->irq)
+		irq = client->irq;
+	else
+		irq = gpio_to_irq(data->eoc_gpio);
+
+	rc = request_irq(irq, ak8975_irq_handler,
+			 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			 dev_name(&client->dev), data);
+	if (rc < 0) {
+		dev_err(&client->dev,
+			"irq %d request failed, (gpio %d): %d\n",
+			irq, data->eoc_gpio, rc);
+		return rc;
+	}
+
+	init_waitqueue_head(&data->data_ready_queue);
+	clear_bit(0, &data->flags);
+	data->eoc_irq = irq;
+
+	return rc;
+}
+
+
 /*
 * Perform some start-of-day setup, including reading the asa calibration
 * values and caching them.
@ -170,6 +221,16 @@ static int ak8975_setup(struct i2c_client *client)
 				AK8975_REG_CNTL_MODE_POWER_DOWN,
 				AK8975_REG_CNTL_MODE_MASK,
 				AK8975_REG_CNTL_MODE_SHIFT);
+
+	if (data->eoc_gpio > 0 || client->irq) {
+		ret = ak8975_setup_irq(data);
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"Error setting data ready interrupt\n");
+			return ret;
+		}
+	}
+
 	if (ret < 0) {
 		dev_err(&client->dev, "Error in setting power-down mode\n");
 		return ret;
@ -266,9 +327,23 @@ static int wait_conversion_complete_polled(struct ak8975_data *data)
 		dev_err(&client->dev, "Conversion timeout happened\n");
 		return -EINVAL;
 	}
+
 	return read_status;
 }

+/* Returns 0 if the end of conversion interrupt occured or -ETIME otherwise */
+static int wait_conversion_complete_interrupt(struct ak8975_data *data)
+{
+	int ret;
+
+	ret = wait_event_timeout(data->data_ready_queue,
+				 test_bit(0, &data->flags),
+				 AK8975_DATA_READY_TIMEOUT);
+	clear_bit(0, &data->flags);
+
+	return ret > 0 ? 0 : -ETIME;
+}
+
 /*
 * Emits the raw flux value for the x, y, or z axis.
 */
@ -294,13 +369,16 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 	}

 	/* Wait for the conversion to complete. */
-	if (gpio_is_valid(data->eoc_gpio))
+	if (data->eoc_irq)
+		ret = wait_conversion_complete_interrupt(data);
+	else if (gpio_is_valid(data->eoc_gpio))
 		ret = wait_conversion_complete_gpio(data);
 	else
 		ret = wait_conversion_complete_polled(data);
 	if (ret < 0)
 		goto exit;

+	/* This will be executed only for non-interrupt based waiting case */
 	if (ret & AK8975_REG_ST1_DRDY_MASK) {
 		ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST2);
 		if (ret < 0) {
@ -384,10 +462,15 @@ static int ak8975_probe(struct i2c_client *client,
 	int err;

 	/* Grab and set up the supplied GPIO. */
-	if (client->dev.platform_data == NULL)
-		eoc_gpio = -1;
-	else
+	if (client->dev.platform_data)
 		eoc_gpio = *(int *)(client->dev.platform_data);
+	else if (client->dev.of_node)
+		eoc_gpio = of_get_gpio(client->dev.of_node, 0);
+	else
+		eoc_gpio = -1;
+
+	if (eoc_gpio == -EPROBE_DEFER)
+		return -EPROBE_DEFER;

 	/* We may not have a GPIO based IRQ to scan, that is fine, we will
 	   poll if so */
@ -409,6 +492,11 @@ static int ak8975_probe(struct i2c_client *client,
 	}
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
+
+	data->client = client;
+	data->eoc_gpio = eoc_gpio;
+	data->eoc_irq = 0;
+
 	/* Perform some basic start-of-day setup of the device. */
 	err = ak8975_setup(client);
 	if (err < 0) {
@ -433,6 +521,8 @@ static int ak8975_probe(struct i2c_client *client,

 exit_free_iio:
 	iio_device_free(indio_dev);
+	if (data->eoc_irq)
+		free_irq(data->eoc_irq, data);
 exit_gpio:
 	if (gpio_is_valid(eoc_gpio))
 		gpio_free(eoc_gpio);
@ -447,6 +537,9 @@ static int ak8975_remove(struct i2c_client *client)

 	iio_device_unregister(indio_dev);

+	if (data->eoc_irq)
+		free_irq(data->eoc_irq, data);
+
 	if (gpio_is_valid(data->eoc_gpio))
 		gpio_free(data->eoc_gpio);

--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@ -26,6 +26,8 @@
 #include <linux/iio/common/st_sensors.h>
 #include "st_magn.h"

+#define ST_MAGN_NUMBER_DATA_CHANNELS		3
+
 /* DEFAULT VALUE FOR SENSORS */
 #define ST_MAGN_DEFAULT_OUT_X_L_ADDR		0X04
 #define ST_MAGN_DEFAULT_OUT_Y_L_ADDR		0X08
@ -113,22 +115,34 @@
 #define ST_MAGN_2_OUT_Z_L_ADDR			0x2c

 static const struct iio_chan_spec st_magn_16bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Z_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_MAGN_DEFAULT_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_MAGN_DEFAULT_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_MAGN_DEFAULT_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };

 static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Z_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_MAGN_2_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_MAGN_2_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_MAGN_2_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };

@ -344,6 +358,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_magn_common_probe_error;

+	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
 	mdata->multiread_bit = mdata->sensor->multi_read_bit;
 	indio_dev->channels = mdata->sensor->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@ -0,0 +1,35 @@
+#
+# Pressure drivers
+#
+menu "Pressure Sensors"
+
+config IIO_ST_PRESS
+	tristate "STMicroelectronics pressures Driver"
+	depends on (I2C || SPI_MASTER) && SYSFS
+	select IIO_ST_SENSORS_CORE
+	select IIO_ST_PRESS_I2C if (I2C)
+	select IIO_ST_PRESS_SPI if (SPI_MASTER)
+	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+	help
+	  Say yes here to build support for STMicroelectronics pressures:
+	  LPS331AP.
+
+	  This driver can also be built as a module. If so, will be created
+	  these modules:
+	  - st_pressure (core functions for the driver [it is mandatory]);
+	  - st_pressure_i2c (necessary for the I2C devices [optional*]);
+	  - st_pressure_spi (necessary for the SPI devices [optional*]);
+
+	  (*) one of these is necessary to do something.
+
+config IIO_ST_PRESS_I2C
+	tristate
+	depends on IIO_ST_PRESS
+	depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_PRESS_SPI
+	tristate
+	depends on IIO_ST_PRESS
+	depends on IIO_ST_SENSORS_SPI
+
+endmenu
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@ -0,0 +1,10 @@
+#
+# Makefile for industrial I/O pressure drivers
+#
+
+obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
+st_pressure-y := st_pressure_core.o
+st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
+
+obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
+obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@ -0,0 +1,39 @@
+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_PRESS_H
+#define ST_PRESS_H
+
+#include <linux/types.h>
+#include <linux/iio/common/st_sensors.h>
+
+#define LPS331AP_PRESS_DEV_NAME		"lps331ap"
+
+int st_press_common_probe(struct iio_dev *indio_dev);
+void st_press_common_remove(struct iio_dev *indio_dev);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_press_allocate_ring(struct iio_dev *indio_dev);
+void st_press_deallocate_ring(struct iio_dev *indio_dev);
+int st_press_trig_set_state(struct iio_trigger *trig, bool state);
+#define ST_PRESS_TRIGGER_SET_STATE (&st_press_trig_set_state)
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_press_allocate_ring(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline void st_press_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#define ST_PRESS_TRIGGER_SET_STATE NULL
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_PRESS_H */
--- a/drivers/iio/pressure/st_pressure_buffer.c
+++ b/drivers/iio/pressure/st_pressure_buffer.c
@ -0,0 +1,105 @@
+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_pressure.h"
+
+int st_press_trig_set_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+
+	return st_sensors_set_dataready_irq(indio_dev, state);
+}
+
+static int st_press_buffer_preenable(struct iio_dev *indio_dev)
+{
+	int err;
+
+	err = st_sensors_set_enable(indio_dev, true);
+	if (err < 0)
+		goto st_press_set_enable_error;
+
+	err = iio_sw_buffer_preenable(indio_dev);
+
+st_press_set_enable_error:
+	return err;
+}
+
+static int st_press_buffer_postenable(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	pdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	if (pdata->buffer_data == NULL) {
+		err = -ENOMEM;
+		goto allocate_memory_error;
+	}
+
+	err = iio_triggered_buffer_postenable(indio_dev);
+	if (err < 0)
+		goto st_press_buffer_postenable_error;
+
+	return err;
+
+st_press_buffer_postenable_error:
+	kfree(pdata->buffer_data);
+allocate_memory_error:
+	return err;
+}
+
+static int st_press_buffer_predisable(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	err = iio_triggered_buffer_predisable(indio_dev);
+	if (err < 0)
+		goto st_press_buffer_predisable_error;
+
+	err = st_sensors_set_enable(indio_dev, false);
+
+st_press_buffer_predisable_error:
+	kfree(pdata->buffer_data);
+	return err;
+}
+
+static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = {
+	.preenable = &st_press_buffer_preenable,
+	.postenable = &st_press_buffer_postenable,
+	.predisable = &st_press_buffer_predisable,
+};
+
+int st_press_allocate_ring(struct iio_dev *indio_dev)
+{
+	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		&st_sensors_trigger_handler, &st_press_buffer_setup_ops);
+}
+
+void st_press_deallocate_ring(struct iio_dev *indio_dev)
+{
+	iio_triggered_buffer_cleanup(indio_dev);
+}
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics pressures buffer");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@ -0,0 +1,272 @@
+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+#include <asm/unaligned.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_pressure.h"
+
+#define ST_PRESS_MBAR_TO_KPASCAL(x)		(x * 10)
+#define ST_PRESS_NUMBER_DATA_CHANNELS		1
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_PRESS_DEFAULT_OUT_XL_ADDR		0x28
+#define ST_TEMP_DEFAULT_OUT_L_ADDR		0x2b
+
+/* FULLSCALE */
+#define ST_PRESS_FS_AVL_1260MB			1260
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_PRESS_1_WAI_EXP			0xbb
+#define ST_PRESS_1_ODR_ADDR			0x20
+#define ST_PRESS_1_ODR_MASK			0x70
+#define ST_PRESS_1_ODR_AVL_1HZ_VAL		0x01
+#define ST_PRESS_1_ODR_AVL_7HZ_VAL		0x05
+#define ST_PRESS_1_ODR_AVL_13HZ_VAL		0x06
+#define ST_PRESS_1_ODR_AVL_25HZ_VAL		0x07
+#define ST_PRESS_1_PW_ADDR			0x20
+#define ST_PRESS_1_PW_MASK			0x80
+#define ST_PRESS_1_FS_ADDR			0x23
+#define ST_PRESS_1_FS_MASK			0x30
+#define ST_PRESS_1_FS_AVL_1260_VAL		0x00
+#define ST_PRESS_1_FS_AVL_1260_GAIN		ST_PRESS_MBAR_TO_KPASCAL(244141)
+#define ST_PRESS_1_FS_AVL_TEMP_GAIN		2083000
+#define ST_PRESS_1_BDU_ADDR			0x20
+#define ST_PRESS_1_BDU_MASK			0x04
+#define ST_PRESS_1_DRDY_IRQ_ADDR		0x22
+#define ST_PRESS_1_DRDY_IRQ_MASK		0x04
+#define ST_PRESS_1_MULTIREAD_BIT		true
+#define ST_PRESS_1_TEMP_OFFSET			42500
+
+static const struct iio_chan_spec st_press_channels[] = {
+	ST_SENSORS_LSM_CHANNELS(IIO_PRESSURE,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 0, IIO_NO_MOD, 'u', IIO_LE, 24, 24,
+			ST_PRESS_DEFAULT_OUT_XL_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_TEMP,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+						BIT(IIO_CHAN_INFO_OFFSET),
+			-1, 0, IIO_NO_MOD, 's', IIO_LE, 16, 16,
+			ST_TEMP_DEFAULT_OUT_L_ADDR),
+	IIO_CHAN_SOFT_TIMESTAMP(1)
+};
+
+static const struct st_sensors st_press_sensors[] = {
+	{
+		.wai = ST_PRESS_1_WAI_EXP,
+		.sensors_supported = {
+			[0] = LPS331AP_PRESS_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_press_channels,
+		.odr = {
+			.addr = ST_PRESS_1_ODR_ADDR,
+			.mask = ST_PRESS_1_ODR_MASK,
+			.odr_avl = {
+				{ 1, ST_PRESS_1_ODR_AVL_1HZ_VAL, },
+				{ 7, ST_PRESS_1_ODR_AVL_7HZ_VAL, },
+				{ 13, ST_PRESS_1_ODR_AVL_13HZ_VAL, },
+				{ 25, ST_PRESS_1_ODR_AVL_25HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_PRESS_1_PW_ADDR,
+			.mask = ST_PRESS_1_PW_MASK,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.fs = {
+			.addr = ST_PRESS_1_FS_ADDR,
+			.mask = ST_PRESS_1_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_PRESS_FS_AVL_1260MB,
+					.value = ST_PRESS_1_FS_AVL_1260_VAL,
+					.gain = ST_PRESS_1_FS_AVL_1260_GAIN,
+					.gain2 = ST_PRESS_1_FS_AVL_TEMP_GAIN,
+				},
+			},
+		},
+		.bdu = {
+			.addr = ST_PRESS_1_BDU_ADDR,
+			.mask = ST_PRESS_1_BDU_MASK,
+		},
+		.drdy_irq = {
+			.addr = ST_PRESS_1_DRDY_IRQ_ADDR,
+			.mask = ST_PRESS_1_DRDY_IRQ_MASK,
+		},
+		.multi_read_bit = ST_PRESS_1_MULTIREAD_BIT,
+		.bootime = 2,
+	},
+};
+
+static int st_press_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *ch, int *val,
+							int *val2, long mask)
+{
+	int err;
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		err = st_sensors_read_info_raw(indio_dev, ch, val);
+		if (err < 0)
+			goto read_error;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+
+		switch (ch->type) {
+		case IIO_PRESSURE:
+			*val2 = pdata->current_fullscale->gain;
+			break;
+		case IIO_TEMP:
+			*val2 = pdata->current_fullscale->gain2;
+			break;
+		default:
+			err = -EINVAL;
+			goto read_error;
+		}
+
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		switch (ch->type) {
+		case IIO_TEMP:
+			*val = 425;
+			*val2 = 10;
+			break;
+		default:
+			err = -EINVAL;
+			goto read_error;
+		}
+
+		return IIO_VAL_FRACTIONAL;
+	default:
+		return -EINVAL;
+	}
+
+read_error:
+	return err;
+}
+
+static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+
+static struct attribute *st_press_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_press_attribute_group = {
+	.attrs = st_press_attributes,
+};
+
+static const struct iio_info press_info = {
+	.driver_module = THIS_MODULE,
+	.attrs = &st_press_attribute_group,
+	.read_raw = &st_press_read_raw,
+};
+
+#ifdef CONFIG_IIO_TRIGGER
+static const struct iio_trigger_ops st_press_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = ST_PRESS_TRIGGER_SET_STATE,
+};
+#define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops)
+#else
+#define ST_PRESS_TRIGGER_OPS NULL
+#endif
+
+int st_press_common_probe(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &press_info;
+
+	err = st_sensors_check_device_support(indio_dev,
+				ARRAY_SIZE(st_press_sensors), st_press_sensors);
+	if (err < 0)
+		goto st_press_common_probe_error;
+
+	pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
+	pdata->multiread_bit = pdata->sensor->multi_read_bit;
+	indio_dev->channels = pdata->sensor->ch;
+	indio_dev->num_channels = ARRAY_SIZE(st_press_channels);
+
+	pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
+						&pdata->sensor->fs.fs_avl[0];
+	pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
+
+	err = st_sensors_init_sensor(indio_dev);
+	if (err < 0)
+		goto st_press_common_probe_error;
+
+	if (pdata->get_irq_data_ready(indio_dev) > 0) {
+		err = st_press_allocate_ring(indio_dev);
+		if (err < 0)
+			goto st_press_common_probe_error;
+
+		err = st_sensors_allocate_trigger(indio_dev,
+							ST_PRESS_TRIGGER_OPS);
+		if (err < 0)
+			goto st_press_probe_trigger_error;
+	}
+
+	err = iio_device_register(indio_dev);
+	if (err)
+		goto st_press_device_register_error;
+
+	return err;
+
+st_press_device_register_error:
+	if (pdata->get_irq_data_ready(indio_dev) > 0)
+		st_sensors_deallocate_trigger(indio_dev);
+st_press_probe_trigger_error:
+	if (pdata->get_irq_data_ready(indio_dev) > 0)
+		st_press_deallocate_ring(indio_dev);
+st_press_common_probe_error:
+	return err;
+}
+EXPORT_SYMBOL(st_press_common_probe);
+
+void st_press_common_remove(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	if (pdata->get_irq_data_ready(indio_dev) > 0) {
+		st_sensors_deallocate_trigger(indio_dev);
+		st_press_deallocate_ring(indio_dev);
+	}
+	iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_press_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics pressures driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@ -0,0 +1,77 @@
+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_i2c.h>
+#include "st_pressure.h"
+
+static int st_press_i2c_probe(struct i2c_client *client,
+						const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct st_sensor_data *pdata;
+	int err;
+
+	indio_dev = iio_device_alloc(sizeof(*pdata));
+	if (indio_dev == NULL) {
+		err = -ENOMEM;
+		goto iio_device_alloc_error;
+	}
+
+	pdata = iio_priv(indio_dev);
+	pdata->dev = &client->dev;
+
+	st_sensors_i2c_configure(indio_dev, client, pdata);
+
+	err = st_press_common_probe(indio_dev);
+	if (err < 0)
+		goto st_press_common_probe_error;
+
+	return 0;
+
+st_press_common_probe_error:
+	iio_device_free(indio_dev);
+iio_device_alloc_error:
+	return err;
+}
+
+static int st_press_i2c_remove(struct i2c_client *client)
+{
+	st_press_common_remove(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static const struct i2c_device_id st_press_id_table[] = {
+	{ LPS331AP_PRESS_DEV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, st_press_id_table);
+
+static struct i2c_driver st_press_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "st-press-i2c",
+	},
+	.probe = st_press_i2c_probe,
+	.remove = st_press_i2c_remove,
+	.id_table = st_press_id_table,
+};
+module_i2c_driver(st_press_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics pressures i2c driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@ -0,0 +1,76 @@
+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_spi.h>
+#include "st_pressure.h"
+
+static int st_press_spi_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct st_sensor_data *pdata;
+	int err;
+
+	indio_dev = iio_device_alloc(sizeof(*pdata));
+	if (indio_dev == NULL) {
+		err = -ENOMEM;
+		goto iio_device_alloc_error;
+	}
+
+	pdata = iio_priv(indio_dev);
+	pdata->dev = &spi->dev;
+
+	st_sensors_spi_configure(indio_dev, spi, pdata);
+
+	err = st_press_common_probe(indio_dev);
+	if (err < 0)
+		goto st_press_common_probe_error;
+
+	return 0;
+
+st_press_common_probe_error:
+	iio_device_free(indio_dev);
+iio_device_alloc_error:
+	return err;
+}
+
+static int st_press_spi_remove(struct spi_device *spi)
+{
+	st_press_common_remove(spi_get_drvdata(spi));
+
+	return 0;
+}
+
+static const struct spi_device_id st_press_id_table[] = {
+	{ LPS331AP_PRESS_DEV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, st_press_id_table);
+
+static struct spi_driver st_press_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "st-press-spi",
+	},
+	.probe = st_press_spi_probe,
+	.remove = st_press_spi_remove,
+	.id_table = st_press_id_table,
+};
+module_spi_driver(st_press_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics pressures spi driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/trigger/Kconfig
+++ b/drivers/iio/trigger/Kconfig
@ -0,0 +1,26 @@
+#
+# Industrial I/O standalone triggers
+#
+menu "Triggers - standalone"
+
+config IIO_INTERRUPT_TRIGGER
+	tristate "Generic interrupt trigger"
+	help
+	  Provides support for using an interrupt of any type as an IIO
+	  trigger.  This may be provided by a gpio driver for example.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iio-trig-interrupt.
+
+config IIO_SYSFS_TRIGGER
+	tristate "SYSFS trigger"
+	depends on SYSFS
+	select IRQ_WORK
+	help
+	  Provides support for using SYSFS entry as IIO triggers.
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iio-trig-sysfs.
+
+endmenu
--- a/drivers/iio/trigger/Makefile
+++ b/drivers/iio/trigger/Makefile
@ -0,0 +1,6 @@
+#
+# Makefile for triggers not associated with iio-devices
+#
+
+obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o
+obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o
--- a/drivers/iio/trigger/iio-trig-interrupt.c
+++ b/drivers/iio/trigger/iio-trig-interrupt.c
@ -0,0 +1,121 @@
+/*
+ * Industrial I/O - generic interrupt based trigger support
+ *
+ * Copyright (c) 2008-2013 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+
+struct iio_interrupt_trigger_info {
+	unsigned int irq;
+};
+
+static irqreturn_t iio_interrupt_trigger_poll(int irq, void *private)
+{
+	/* Timestamp not currently provided */
+	iio_trigger_poll(private, 0);
+	return IRQ_HANDLED;
+}
+
+static const struct iio_trigger_ops iio_interrupt_trigger_ops = {
+	.owner = THIS_MODULE,
+};
+
+static int iio_interrupt_trigger_probe(struct platform_device *pdev)
+{
+	struct iio_interrupt_trigger_info *trig_info;
+	struct iio_trigger *trig;
+	unsigned long irqflags;
+	struct resource *irq_res;
+	int irq, ret = 0;
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (irq_res == NULL)
+		return -ENODEV;
+
+	irqflags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
+
+	irq = irq_res->start;
+
+	trig = iio_trigger_alloc("irqtrig%d", irq);
+	if (!trig) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL);
+	if (!trig_info) {
+		ret = -ENOMEM;
+		goto error_put_trigger;
+	}
+	iio_trigger_set_drvdata(trig, trig_info);
+	trig_info->irq = irq;
+	trig->ops = &iio_interrupt_trigger_ops;
+	ret = request_irq(irq, iio_interrupt_trigger_poll,
+			  irqflags, trig->name, trig);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"request IRQ-%d failed", irq);
+		goto error_free_trig_info;
+	}
+
+	ret = iio_trigger_register(trig);
+	if (ret)
+		goto error_release_irq;
+	platform_set_drvdata(pdev, trig);
+
+	return 0;
+
+/* First clean up the partly allocated trigger */
+error_release_irq:
+	free_irq(irq, trig);
+error_free_trig_info:
+	kfree(trig_info);
+error_put_trigger:
+	iio_trigger_put(trig);
+error_ret:
+	return ret;
+}
+
+static int iio_interrupt_trigger_remove(struct platform_device *pdev)
+{
+	struct iio_trigger *trig;
+	struct iio_interrupt_trigger_info *trig_info;
+
+	trig = platform_get_drvdata(pdev);
+	trig_info = iio_trigger_get_drvdata(trig);
+	iio_trigger_unregister(trig);
+	free_irq(trig_info->irq, trig);
+	kfree(trig_info);
+	iio_trigger_put(trig);
+
+	return 0;
+}
+
+static struct platform_driver iio_interrupt_trigger_driver = {
+	.probe = iio_interrupt_trigger_probe,
+	.remove = iio_interrupt_trigger_remove,
+	.driver = {
+		.name = "iio_interrupt_trigger",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(iio_interrupt_trigger_driver);
+
+MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
+MODULE_DESCRIPTION("Interrupt trigger for the iio subsystem");
+MODULE_LICENSE("GPL v2");
--- a/drivers/staging/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/staging/iio/trigger/iio-trig-sysfs.c
@ -34,7 +34,7 @@ static ssize_t iio_sysfs_trig_add(struct device *dev,
 	int ret;
 	unsigned long input;

-	ret = strict_strtoul(buf, 10, &input);
+	ret = kstrtoul(buf, 10, &input);
 	if (ret)
 		return ret;
 	ret = iio_sysfs_trigger_probe(input);
@ -53,7 +53,7 @@ static ssize_t iio_sysfs_trig_remove(struct device *dev,
 	int ret;
 	unsigned long input;

-	ret = strict_strtoul(buf, 10, &input);
+	ret = kstrtoul(buf, 10, &input);
 	if (ret)
 		return ret;
 	ret = iio_sysfs_trigger_remove(input);
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@ -62,6 +62,8 @@ source "drivers/staging/line6/Kconfig"

 source "drivers/staging/octeon/Kconfig"

+source "drivers/staging/octeon-usb/Kconfig"
+
 source "drivers/staging/serqt_usb2/Kconfig"

 source "drivers/staging/vt6655/Kconfig"
@ -140,4 +142,8 @@ source "drivers/staging/netlogic/Kconfig"

 source "drivers/staging/dwc2/Kconfig"

+source "drivers/staging/lustre/Kconfig"
+
+source "drivers/staging/btmtk_usb/Kconfig"
+
 endif # STAGING
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@ -25,6 +25,7 @@ obj-$(CONFIG_LINE6_USB)		+= line6/
 obj-$(CONFIG_NETLOGIC_XLR_NET)	+= netlogic/
 obj-$(CONFIG_USB_SERIAL_QUATECH2)	+= serqt_usb2/
 obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
+obj-$(CONFIG_OCTEON_USB)	+= octeon-usb/
 obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_VME_BUS)		+= vme/
@ -62,3 +63,5 @@ obj-$(CONFIG_FIREWIRE_SERIAL)	+= fwserial/
 obj-$(CONFIG_ZCACHE)		+= zcache/
 obj-$(CONFIG_GOLDFISH)		+= goldfish/
 obj-$(CONFIG_USB_DWC2)		+= dwc2/
+obj-$(CONFIG_LUSTRE_FS)		+= lustre/
+obj-$(CONFIG_USB_BTMTK)		+= btmtk_usb/
--- a/drivers/staging/android/ashmem.c
+++ b/drivers/staging/android/ashmem.c
@ -704,7 +704,8 @@ static long ashmem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)

 /* support of 32bit userspace on 64bit platforms */
 #ifdef CONFIG_COMPAT
-static long compat_ashmem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static long compat_ashmem_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg)
 {

 	switch (cmd) {
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@ -790,7 +790,7 @@ static void binder_delete_free_buffer(struct binder_proc *proc,
 	list_del(&buffer->entry);
 	if (free_page_start || free_page_end) {
 		binder_debug(BINDER_DEBUG_BUFFER_ALLOC,
-			     "%d: merge free, buffer %p do not share page%s%s with with %p or %p\n",
+			     "%d: merge free, buffer %p do not share page%s%s with %p or %p\n",
 			     proc->pid, buffer, free_page_start ? "" : " end",
 			     free_page_end ? "" : " start", prev, next);
 		binder_update_page_range(proc, 0, free_page_start ?
--- a/drivers/staging/android/sw_sync.c
+++ b/drivers/staging/android/sw_sync.c
@ -160,7 +160,8 @@ static int sw_sync_release(struct inode *inode, struct file *file)
 	return 0;
 }

-static long sw_sync_ioctl_create_fence(struct sw_sync_timeline *obj, unsigned long arg)
+static long sw_sync_ioctl_create_fence(struct sw_sync_timeline *obj,
+				       unsigned long arg)
 {
 	int fd = get_unused_fd();
 	int err;
@ -218,7 +219,8 @@ static long sw_sync_ioctl_inc(struct sw_sync_timeline *obj, unsigned long arg)
 	return 0;
 }

-static long sw_sync_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static long sw_sync_ioctl(struct file *file, unsigned int cmd,
+			  unsigned long arg)
 {
 	struct sw_sync_timeline *obj = file->private_data;

--- a/drivers/staging/android/sync.c
+++ b/drivers/staging/android/sync.c
@ -125,9 +125,9 @@ static void sync_timeline_remove_pt(struct sync_pt *pt)
 	spin_unlock_irqrestore(&obj->active_list_lock, flags);

 	spin_lock_irqsave(&obj->child_list_lock, flags);
-	if (!list_empty(&pt->child_list)) {
+	if (!list_empty(&pt->child_list))
 		list_del_init(&pt->child_list);
-	}
+
 	spin_unlock_irqrestore(&obj->child_list_lock, flags);
 }

@ -876,11 +876,11 @@ static void sync_print_pt(struct seq_file *s, struct sync_pt *pt, bool fence)
 			seq_printf(s, " / %s", value);
 		}
 	} else if (pt->parent->ops->print_pt) {
-		seq_printf(s, ": ");
+		seq_puts(s, ": ");
 		pt->parent->ops->print_pt(s, pt);
 	}

-	seq_printf(s, "\n");
+	seq_puts(s, "\n");
 }

 static void sync_print_obj(struct seq_file *s, struct sync_timeline *obj)
@ -895,11 +895,11 @@ static void sync_print_obj(struct seq_file *s, struct sync_timeline *obj)
 		obj->ops->timeline_value_str(obj, value, sizeof(value));
 		seq_printf(s, ": %s", value);
 	} else if (obj->ops->print_obj) {
-		seq_printf(s, ": ");
+		seq_puts(s, ": ");
 		obj->ops->print_obj(s, obj);
 	}

-	seq_printf(s, "\n");
+	seq_puts(s, "\n");

 	spin_lock_irqsave(&obj->child_list_lock, flags);
 	list_for_each(pos, &obj->child_list_head) {
@ -940,7 +940,7 @@ static int sync_debugfs_show(struct seq_file *s, void *unused)
 	unsigned long flags;
 	struct list_head *pos;

-	seq_printf(s, "objs:\n--------------\n");
+	seq_puts(s, "objs:\n--------------\n");

 	spin_lock_irqsave(&sync_timeline_list_lock, flags);
 	list_for_each(pos, &sync_timeline_list_head) {
@ -949,11 +949,11 @@ static int sync_debugfs_show(struct seq_file *s, void *unused)
 				     sync_timeline_list);

 		sync_print_obj(s, obj);
-		seq_printf(s, "\n");
+		seq_puts(s, "\n");
 	}
 	spin_unlock_irqrestore(&sync_timeline_list_lock, flags);

-	seq_printf(s, "fences:\n--------------\n");
+	seq_puts(s, "fences:\n--------------\n");

 	spin_lock_irqsave(&sync_fence_list_lock, flags);
 	list_for_each(pos, &sync_fence_list_head) {
@ -961,7 +961,7 @@ static int sync_debugfs_show(struct seq_file *s, void *unused)
 			container_of(pos, struct sync_fence, sync_fence_list);

 		sync_print_fence(s, fence);
-		seq_printf(s, "\n");
+		seq_puts(s, "\n");
 	}
 	spin_unlock_irqrestore(&sync_fence_list_lock, flags);
 	return 0;
@ -988,7 +988,7 @@ late_initcall(sync_debugfs_init);

 #define DUMP_CHUNK 256
 static char sync_dump_buf[64 * 1024];
-void sync_dump(void)
+static void sync_dump(void)
 {
 	struct seq_file s = {
 		.buf = sync_dump_buf,
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@ -324,9 +324,11 @@ static void send_data(struct asus_oled_dev *odev)
 		return;

 	if (odev->pack_mode == PACK_MODE_G1) {
-		/* When sending roll-mode data the display updated only
-		   first packet.  I have no idea why, but when static picture
-		   is sent just before rolling picture everything works fine. */
+		/*
+		 * When sending roll-mode data the display updated only
+		 * first packet.  I have no idea why, but when static picture
+		 * is sent just before rolling picture everything works fine.
+		 */
 		if (odev->pic_mode == ASUS_OLED_ROLL)
 			send_packets(odev->udev, packet, odev->buf,
 				     ASUS_OLED_STATIC, 2);
@ -363,9 +365,11 @@ static int append_values(struct asus_oled_dev *odev, uint8_t val, size_t count)

 		switch (odev->pack_mode) {
 		case PACK_MODE_G1:
-			/* i = (x/128)*640 + 127 - x + (y/8)*128;
-			   This one for 128 is the same, but might be better
-			   for different widths? */
+			/*
+			 * i = (x/128)*640 + 127 - x + (y/8)*128;
+			 * This one for 128 is the same, but might be better
+			 * for different widths?
+			 */
 			i = (x/odev->dev_width)*640 +
 				odev->dev_width - 1 - x +
 				(y/8)*odev->dev_width;
@ -383,10 +387,8 @@ static int append_values(struct asus_oled_dev *odev, uint8_t val, size_t count)
 		}

 		if (i >= odev->buf_size) {
-			dev_err(odev->dev, "Buffer overflow! Report a bug:"
-			       "offs: %d >= %d i: %d (x: %d y: %d)\n",
-			       (int) odev->buf_offs, (int) odev->buf_size,
-			       (int) i, (int) x, (int) y);
+			dev_err(odev->dev, "Buffer overflow! Report a bug: offs: %zu >= %zu i: %zu (x: %zu y: %zu)\n",
+			       odev->buf_offs, odev->buf_size, i, x, y);
 			return -EIO;
 		}

@ -401,7 +403,7 @@ static int append_values(struct asus_oled_dev *odev, uint8_t val, size_t count)

 		default:
 			/* cannot get here; stops gcc complaining*/
-			;
+			break;
 		}

 		odev->buf_offs++;
@ -566,9 +568,11 @@ static ssize_t odev_set_picture(struct asus_oled_dev *odev,
 			if (ret < 0)
 				return ret;
 		} else if (buf[offs] == '\n') {
-			/* New line detected. Lets assume, that all characters
-			   till the end of the line were equal to the last
-			   character in this line.*/
+			/*
+			 * New line detected. Lets assume, that all characters
+			 * till the end of the line were equal to the last
+			 * character in this line.
+			 */
 			if (odev->buf_offs % odev->width != 0)
 				ret = append_values(odev, odev->last_val,
 						    odev->width -
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@ -13,7 +13,7 @@
 * Returns	  - Zero(Success)
 ****************************************************************/

-static int bcm_char_open(struct inode *inode, struct file * filp)
+static int bcm_char_open(struct inode *inode, struct file *filp)
 {
 	struct bcm_mini_adapter *Adapter = NULL;
 	struct bcm_tarang_data *pTarang = NULL;
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@ -42,107 +42,95 @@ send to f/w with in 200 ms after the Idle/Shutdown req issued
 */


-int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* puiBuffer)
+int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *puiBuffer)
 {
 	int	status = STATUS_SUCCESS;
 	unsigned int	uiRegRead = 0;
 	int bytes;

-	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"SubType of Message :0x%X", ntohl(*puiBuffer));
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer));

-	if(ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD)
-	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL," Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
-		if(ntohl(*(puiBuffer+1)) == 0 )
-		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Got IDLE MODE WAKE UP Response From F/W");
+	if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
+		if (ntohl(*(puiBuffer+1)) == 0 ) {
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W");

-			status = wrmalt (Adapter,SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
-			if(status)
-			{
-				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
+			status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
+			if (status) {
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
 				return status;
 			}

-			if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
-			{
+			if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
 				uiRegRead = 0x00000000 ;
-				status = wrmalt (Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
-				if(status)
-				{
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode	Reg");
+				status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
+				if (status) {
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode	Reg");
 					return status;
 				}
 			}
-			//Below Register should not br read in case of Manual and Protocol Idle mode.
-			else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
-			{
-				//clear on read Register
+			/* Below Register should not br read in case of Manual and Protocol Idle mode */
+			else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
+				/* clear on read Register */
 				bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
 				if (bytes < 0) {
 					status = bytes;
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
 					return status;
 				}
-				//clear on read Register
+				/* clear on read Register */
 				bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
 				if (bytes < 0) {
 					status = bytes;
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort	Reg1");
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort	Reg1");
 					return status;
 				}
 			}
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");

-			// Set Idle Mode Flag to False and Clear IdleMode reg.
+			/* Set Idle Mode Flag to False and Clear IdleMode reg. */
 			Adapter->IdleMode = FALSE;
 			Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;

 			wake_up(&Adapter->lowpower_mode_wait_queue);

-		}
-		else
+		} else {
+			if (TRUE == Adapter->IdleMode)
 			{
-			if(TRUE == Adapter->IdleMode)
-			{
-				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Device is already in Idle mode....");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode....");
 				return status ;
 			}

 			uiRegRead = 0;
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");

-			if (Adapter->chip_id== BCS220_2 ||
+			if (Adapter->chip_id == BCS220_2 ||
 				Adapter->chip_id == BCS220_2BC ||
-					Adapter->chip_id== BCS250_BC ||
-					Adapter->chip_id== BCS220_3)
-			{
+					Adapter->chip_id == BCS250_BC ||
+					Adapter->chip_id == BCS220_3) {

 				bytes = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
 				if (bytes < 0) {
 					status = bytes;
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
 					return status;
 				}


 				uiRegRead |= (1<<17);

-				status = wrmalt (Adapter,HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
-				if(status)
-				{
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
+				status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
+				if (status) {
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
 					return status;
 				}

 			}
 			SendIdleModeResponse(Adapter);
 		}
-	}
-	else if(ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG)
-	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
-		OverrideServiceFlowParams(Adapter,puiBuffer);
+	} else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
+		OverrideServiceFlowParams(Adapter, puiBuffer);
 	}
 	return status;
 }
@ -152,46 +140,40 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
 	int 	status = STATUS_SUCCESS;
 	unsigned int value;
 	unsigned int chip_id ;
-	unsigned long timeout = 0 ,itr = 0;
+	unsigned long timeout = 0, itr = 0;

 	int 	lenwritten = 0;
-	unsigned char aucAbortPattern[8]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
+	unsigned char aucAbortPattern[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
 	struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter;

-	//Abort Bus suspend if its already suspended
-	if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend))
-	{
+	/* Abort Bus suspend if its already suspended */
+	if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) {
 		status = usb_autopm_get_interface(psInterfaceAdapter->interface);
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Bus got wakeup..Aborting Idle mode... status:%d \n",status);
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status);

 	}

-	if((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
+	if ((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
 									||
-	   (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE))
-	{
-		//write the SW abort pattern.
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
-		status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
-		if(status)
-		{
-				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
+	   (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) {
+		/* write the SW abort pattern. */
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
+		status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
+		if (status) {
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
 				return status;
 		}
 	}

-	if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
-	{
+	if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
 		value = 0x80000000;
-		status = wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
-		if(status)
+		status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
+		if (status)
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
 			return status;
 		}
-	}
-	else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
-	{
+	} else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
 		/*
 		 * Get a Interrupt Out URB and send 8 Bytes Down
 		 * To be Done in Thread Context.
@ -204,43 +186,32 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
 			8,
 			&lenwritten,
 			5000);
-		if(status)
-		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n",status);
+		if (status) {
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status);
 			return status;
-		}
-		else
-		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
+		} else {
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
 		}

-		//mdelay(25);
+		/* mdelay(25); */

-		timeout= jiffies +  msecs_to_jiffies(50) ;
-		while( timeout > jiffies )
-		{
+		timeout = jiffies +  msecs_to_jiffies(50) ;
+		while ( timeout > jiffies ) {
 			itr++ ;
 			rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT));
-			if(0xbece3200==(chip_id&~(0xF0)))
-			{
+			if (0xbece3200 == (chip_id&~(0xF0)))
 				chip_id = chip_id&~(0xF0);
-			}
-			if(chip_id == Adapter->chip_id)
+			if (chip_id == Adapter->chip_id)
 				break;
 		}
-		if(timeout < jiffies )
-		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Not able to read chip-id even after 25 msec");
-		}
+		if (timeout < jiffies )
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec");
 		else
-		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Number of completed iteration to read chip-id :%lu", itr);
-		}
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr);

-		status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
-		if(status)
-		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
+		status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
+		if (status) {
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
 			return status;
 		}
 	}
@ -249,13 +220,10 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
 int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter)
 {
 	ULONG	Status = 0;
-	if(Adapter->bTriedToWakeUpFromlowPowerMode)
-	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
-	}
-	else
-	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Writing Low Power Mode Abort pattern to the Device\n");
+	if (Adapter->bTriedToWakeUpFromlowPowerMode) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
+	} else {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n");
 		Adapter->bTriedToWakeUpFromlowPowerMode = TRUE;
 		InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern);

@ -269,33 +237,30 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
 	INT Status = 0;
 	int bytes;

-	if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
-	{
-		// clear idlemode interrupt.
+	if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
+		/* clear idlemode interrupt. */
 		uiRegVal = 0;
-		Status =wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
-		if(Status)
-		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
+		Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
+		if (Status) {
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
 			return;
 		}
 	}

-    else
-	{
+    else {

-        //clear Interrupt EP registers.
-		bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
+        /* clear Interrupt EP registers. */
+		bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
 		if (bytes < 0) {
 			Status = bytes;
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
 			return;
 		}

-		bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
+		bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
 		if (bytes < 0) {
 			Status = bytes;
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
 			return;
 		}
 	}
--- a/drivers/staging/bcm/Version.h
+++ b/drivers/staging/bcm/Version.h
@ -1,4 +1,3 @@
-
 /*Copyright (c) 2005 Beceem Communications Inc.

 Module Name:
@ -17,7 +16,6 @@ Abstract:
 #define VER_FILETYPE                VFT_DRV
 #define VER_FILESUBTYPE             VFT2_DRV_NETWORK

-
 #define VER_FILEVERSION             5.2.45
 #define VER_FILEVERSION_STR         "5.2.45"

@ -28,8 +26,4 @@ Abstract:
 #define VER_PRODUCTVERSION_STR      VER_FILEVERSION_STR


-
-
-//#include "common.ver"
-
-#endif 	//VERSION_H
+#endif /* VERSION_H */
--- a/drivers/staging/bcm/vendorspecificextn.c
+++ b/drivers/staging/bcm/vendorspecificextn.c
@ -1,70 +1,70 @@
 #include "headers.h"
-//-----------------------------------------------------------------------------
-// Procedure:	vendorextnGetSectionInfo
-//
-// Description: Finds the type of NVM used.
-//
-// Arguments:
-//		Adapter    - ptr to Adapter object instance
-//		pNVMType   - ptr to NVM type.
-// Returns:
-//		STATUS_SUCCESS/STATUS_FAILURE
-//
-//-----------------------------------------------------------------------------
+/*
+ * Procedure:	vendorextnGetSectionInfo
+ *
+ * Description: Finds the type of NVM used.
+ *
+ * Arguments:
+ *		Adapter    - ptr to Adapter object instance
+ *		pNVMType   - ptr to NVM type.
+ * Returns:
+ *		STATUS_SUCCESS/STATUS_FAILURE
+ *
+ */
 INT vendorextnGetSectionInfo(PVOID  pContext, struct bcm_flash2x_vendor_info *pVendorInfo)
 {
 	return STATUS_FAILURE;
 }

-//-----------------------------------------------------------------------------
-// Procedure:   vendorextnInit
-//
-// Description: Initializing the vendor extension NVM interface
-//
-// Arguments:
-//              Adapter   - Pointer to MINI Adapter Structure.
-
-// Returns:
-//              STATUS_SUCCESS/STATUS_FAILURE
-//
-//-----------------------------------------------------------------------------
+/*
+ * Procedure:   vendorextnInit
+ *
+ * Description: Initializing the vendor extension NVM interface
+ *
+ * Arguments:
+ *              Adapter   - Pointer to MINI Adapter Structure
+ * Returns:
+ *             STATUS_SUCCESS/STATUS_FAILURE
+ *
+ *
+ */
 INT vendorextnInit(struct bcm_mini_adapter *Adapter)
 {
 	return STATUS_SUCCESS;
 }

-//-----------------------------------------------------------------------------
-// Procedure:   vendorextnExit
-//
-// Description: Free the resource associated with vendor extension NVM interface
-//
-// Arguments:
-//              Adapter   - Pointer to MINI Adapter Structure.
-
-// Returns:
-//              STATUS_SUCCESS/STATUS_FAILURE
-//
-//-----------------------------------------------------------------------------
+/*
+ * Procedure:   vendorextnExit
+ *
+ * Description: Free the resource associated with vendor extension NVM interface
+ *
+ * Arguments:
+ *
+ * Returns:
+ *              STATUS_SUCCESS/STATUS_FAILURE
+ *
+ *
+ */
 INT vendorextnExit(struct bcm_mini_adapter *Adapter)
 {
 	return STATUS_SUCCESS;
 }

-//------------------------------------------------------------------------
-// Procedure:	vendorextnIoctl
-//
-// Description: 	execute the vendor extension specific ioctl
-//
-//Arguments:
-//		Adapter -Beceem private Adapter Structure
-//		cmd 	-vendor extension specific Ioctl commad
-//		arg		-input parameter sent by vendor
-//
-// Returns:
-//		CONTINUE_COMMON_PATH in case it is not meant to be processed by vendor ioctls
-//		STATUS_SUCCESS/STATUS_FAILURE as per the IOCTL return value
-//
-//--------------------------------------------------------------------------
+/*
+ * Procedure:	vendorextnIoctl
+ *
+ * Description: execute the vendor extension specific ioctl
+ *
+ * Arguments:
+ *		Adapter -Beceem private Adapter Structure
+ *		cmd	-vendor extension specific Ioctl commad
+ *		arg	-input parameter sent by vendor
+ *
+ * Returns:
+ *		CONTINUE_COMMON_PATH in case it is not meant to be processed by vendor ioctls
+ *		STATUS_SUCCESS/STATUS_FAILURE as per the IOCTL return value
+ */
+
 INT vendorextnIoctl(struct bcm_mini_adapter *Adapter, UINT cmd, ULONG arg)
 {
 	return CONTINUE_COMMON_PATH;
@ -72,22 +72,21 @@ INT vendorextnIoctl(struct bcm_mini_adapter *Adapter, UINT cmd, ULONG arg)



-//------------------------------------------------------------------
-// Procedure:	vendorextnReadSection
-//
-// Description: Reads from a section of NVM
-//
-// Arguments:
-//		pContext - ptr to Adapter object instance
-//		pBuffer - Read the data from Vendor Area to this buffer
-//		SectionVal   - Value of type of Section
-//		Offset - Read from the Offset of the Vendor Section.
-//		numOfBytes - Read numOfBytes from the Vendor section to Buffer
-//
-// Returns:
-//		STATUS_SUCCESS/STATUS_FAILURE
-//
-//------------------------------------------------------------------
+/*
+ * Procedure:	vendorextnReadSection
+ *
+ * Description: Reads from a section of NVM
+ *
+ * Arguments:
+ *		pContext - ptr to Adapter object instance
+ *		pBuffer - Read the data from Vendor Area to this buffer
+ *		SectionVal   - Value of type of Section
+ *		Offset - Read from the Offset of the Vendor Section.
+ *		numOfBytes - Read numOfBytes from the Vendor section to Buffer
+ *
+ * Returns:
+ *		STATUS_SUCCESS/STATUS_FAILURE
+ */

 INT vendorextnReadSection(PVOID  pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
 			UINT offset, UINT numOfBytes)
@ -97,23 +96,22 @@ INT vendorextnReadSection(PVOID  pContext, PUCHAR pBuffer, enum bcm_flash2x_sect



-//------------------------------------------------------------------
-// Procedure:	vendorextnWriteSection
-//
-// Description: Write to a Section of NVM
-//
-// Arguments:
-//		pContext - ptr to Adapter object instance
-//		pBuffer - Write the data provided in the buffer
-//		SectionVal   - Value of type of Section
-//		Offset - Writes to the Offset of the Vendor Section.
-//		numOfBytes - Write num Bytes after reading from pBuffer.
-//		bVerify - the Buffer Written should be verified.
-//
-// Returns:
-//		STATUS_SUCCESS/STATUS_FAILURE
-//
-//------------------------------------------------------------------
+/*
+ * Procedure:	vendorextnWriteSection
+ *
+ * Description: Write to a Section of NVM
+ *
+ * Arguments:
+ *		pContext - ptr to Adapter object instance
+ *		pBuffer - Write the data provided in the buffer
+ *		SectionVal   - Value of type of Section
+ *		Offset - Writes to the Offset of the Vendor Section.
+ *		numOfBytes - Write num Bytes after reading from pBuffer.
+ *		bVerify - the Buffer Written should be verified.
+ *
+ * Returns:
+ *		STATUS_SUCCESS/STATUS_FAILURE
+ */
 INT vendorextnWriteSection(PVOID  pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
 			UINT offset, UINT numOfBytes, BOOLEAN bVerify)
 {
@ -122,25 +120,23 @@ INT vendorextnWriteSection(PVOID  pContext, PUCHAR pBuffer, enum bcm_flash2x_sec



-//------------------------------------------------------------------
-// Procedure:	vendorextnWriteSectionWithoutErase
-//
-// Description: Write to a Section of NVM without erasing the sector
-//
-// Arguments:
-//		pContext - ptr to Adapter object instance
-//		pBuffer - Write the data provided in the buffer
-//		SectionVal   - Value of type of Section
-//		Offset - Writes to the Offset of the Vendor Section.
-//		numOfBytes - Write num Bytes after reading from pBuffer.
-//
-// Returns:
-//		STATUS_SUCCESS/STATUS_FAILURE
-//
-//------------------------------------------------------------------
+/*
+ * Procedure:	vendorextnWriteSectionWithoutErase
+ *
+ * Description: Write to a Section of NVM without erasing the sector
+ *
+ * Arguments:
+ *		pContext - ptr to Adapter object instance
+ *		pBuffer - Write the data provided in the buffer
+ *		SectionVal   - Value of type of Section
+ *		Offset - Writes to the Offset of the Vendor Section.
+ *		numOfBytes - Write num Bytes after reading from pBuffer.
+ *
+ * Returns:
+ *		STATUS_SUCCESS/STATUS_FAILURE
+ */
 INT vendorextnWriteSectionWithoutErase(PVOID  pContext, PUCHAR pBuffer, enum bcm_flash2x_section_val SectionVal,
 			UINT offset, UINT numOfBytes)
 {
 	return STATUS_FAILURE;
 }
-
--- a/drivers/staging/btmtk_usb/Kconfig
+++ b/drivers/staging/btmtk_usb/Kconfig
@ -0,0 +1,11 @@
+config USB_BTMTK
+	tristate "Mediatek Bluetooth support"
+	depends on USB && BT && m
+	---help---
+	  Say Y here if you wish to control a MTK USB Bluetooth.
+
+	  This option depends on 'USB' support being enabled
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called btmtk_usb.
+
--- a/drivers/staging/btmtk_usb/Makefile
+++ b/drivers/staging/btmtk_usb/Makefile
@ -0,0 +1 @@
+obj-$(CONFIG_USB_BTMTK)	+= btmtk_usb.o
--- a/drivers/staging/btmtk_usb/README
+++ b/drivers/staging/btmtk_usb/README
@ -0,0 +1,14 @@
+-build driver modules
+	make
+
+-install driver modules
+	make install
+
+-remove driver modules
+	make clean
+
+-dynamic debug message
+	turn on CONFIG_DYNAMIC_DEBUG compiler flag for current kernel
+	mount -t debugfs none /sys/kernel/debug/
+	echo "module module_name +p" > /sys/kernel/debug/dynamic_debug/control(turn on debug messages, module name such as btmtk_usb)
+	echo "module module_name -p" > /sys/kernel/debug/dynamic_debug/control(turn off debug messages, module name such as btmtk_usb)
--- a/drivers/staging/btmtk_usb/TODO
+++ b/drivers/staging/btmtk_usb/TODO
@ -0,0 +1,10 @@
+TODO:
+        - checkpatch.pl clean
+	- determine if the driver should not be using a duplicate
+          version of the usb-bluetooth interface code, but should
+          be merged into the drivers/bluetooth/ directory and
+          infrastructure instead.
+	- review by the bluetooth developer community
+
+Please send any patches for this driver to Yu-Chen, Cho <acho@suse.com> and
+jay.hung@mediatek.com
--- a/drivers/staging/btmtk_usb/btmtk_usb.c
+++ b/drivers/staging/btmtk_usb/btmtk_usb.c
--- a/drivers/staging/btmtk_usb/btmtk_usb.h
+++ b/drivers/staging/btmtk_usb/btmtk_usb.h
@ -0,0 +1,138 @@
+/*
+ *  MediaTek Bluetooth USB Driver
+ *
+ *  Copyright (C) 2013, MediaTek co.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *  or on the worldwide web at
+ *  http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ */
+
+#ifndef __BTMTK_USB_H__
+#define __BTMTK_USB_H_
+
+/* Memory map for MTK BT */
+
+/* SYS Control */
+#define SYSCTL	0x400000
+
+/* WLAN */
+#define WLAN		0x410000
+
+/* MCUCTL */
+#define INT_LEVEL		0x0718
+#define COM_REG0		0x0730
+#define SEMAPHORE_00	0x07B0
+#define SEMAPHORE_01	0x07B4
+#define SEMAPHORE_02	0x07B8
+#define SEMAPHORE_03	0x07BC
+
+/* Chip definition */
+
+#define CONTROL_TIMEOUT_JIFFIES ((300 * HZ) / 100)
+#define DEVICE_VENDOR_REQUEST_OUT	0x40
+#define DEVICE_VENDOR_REQUEST_IN	0xc0
+#define DEVICE_CLASS_REQUEST_OUT	0x20
+
+#define BTUSB_MAX_ISOC_FRAMES	10
+#define BTUSB_INTR_RUNNING	0
+#define BTUSB_BULK_RUNNING	1
+#define BTUSB_ISOC_RUNNING	2
+#define BTUSB_SUSPENDING	3
+#define BTUSB_DID_ISO_RESUME	4
+
+/* ROM Patch */
+#define PATCH_HCI_HEADER_SIZE 4
+#define PATCH_WMT_HEADER_SIZE 5
+#define PATCH_HEADER_SIZE (PATCH_HCI_HEADER_SIZE + PATCH_WMT_HEADER_SIZE)
+#define UPLOAD_PATCH_UNIT 2048
+#define PATCH_INFO_SIZE 30
+#define PATCH_PHASE1 1
+#define PATCH_PHASE2 2
+#define PATCH_PHASE3 3
+
+struct btmtk_usb_data {
+	struct hci_dev *hdev;
+	struct usb_device    *udev;
+	struct usb_interface *intf;
+	struct usb_interface *isoc;
+
+	spinlock_t lock;
+
+	unsigned long flags;
+	struct work_struct work;
+	struct work_struct waker;
+
+	struct usb_anchor tx_anchor;
+	struct usb_anchor intr_anchor;
+	struct usb_anchor bulk_anchor;
+	struct usb_anchor isoc_anchor;
+	struct usb_anchor deferred;
+	int tx_in_flight;
+	spinlock_t txlock;
+
+	struct usb_endpoint_descriptor *intr_ep;
+	struct usb_endpoint_descriptor *bulk_tx_ep;
+	struct usb_endpoint_descriptor *bulk_rx_ep;
+	struct usb_endpoint_descriptor *isoc_tx_ep;
+	struct usb_endpoint_descriptor *isoc_rx_ep;
+
+	__u8 cmdreq_type;
+
+	unsigned int sco_num;
+	int isoc_altsetting;
+	int suspend_count;
+
+	/* request for different io operation */
+	u8 w_request;
+	u8 r_request;
+
+	/* io buffer for usb control transfer */
+	char *io_buf;
+
+	struct semaphore fw_upload_sem;
+
+	/* unsigned char *fw_image; */
+	/* unsigned char *rom_patch; */
+	const struct firmware *firmware;
+	u32 chip_id;
+	u8 need_load_fw;
+	u8 need_load_rom_patch;
+	u32 rom_patch_offset;
+	u32 rom_patch_len;
+};
+
+static inline int is_mt7630(struct btmtk_usb_data *data)
+{
+	return ((data->chip_id & 0xffff0000) == 0x76300000);
+}
+
+static inline int is_mt7650(struct btmtk_usb_data *data)
+{
+	return ((data->chip_id & 0xffff0000) == 0x76500000);
+}
+
+static inline int is_mt7632(struct btmtk_usb_data *data)
+{
+	return ((data->chip_id & 0xffff0000) == 0x76320000);
+}
+
+static inline int is_mt7662(struct btmtk_usb_data *data)
+{
+	return ((data->chip_id & 0xffff0000) == 0x76620000);
+}
+
+#endif
--- a/drivers/staging/ced1401/ced_ioc.c
+++ b/drivers/staging/ced1401/ced_ioc.c
--- a/drivers/staging/ced1401/ced_ioctl.h
+++ b/drivers/staging/ced1401/ced_ioctl.h
@ -35,7 +35,7 @@ typedef struct TransferDesc {
 	short eSize;		/* element size - is tohost flag for circular */
 } TRANSFERDESC;

-typedef TRANSFERDESC * LPTRANSFERDESC;
+typedef TRANSFERDESC *LPTRANSFERDESC;

 typedef struct TransferEvent {
 	unsigned int dwStart;		/* offset into the area */
--- a/drivers/staging/ced1401/machine.h
+++ b/drivers/staging/ced1401/machine.h
@ -79,18 +79,11 @@
 #if defined(LINUX) || defined(MAXOSX)
 	#define FAR

-    typedef int BOOL;       // To match Windows
-    typedef char * LPSTR;
-    typedef const char * LPCSTR;
-    typedef unsigned short WORD;
-    typedef unsigned int  DWORD;
+	typedef int BOOL;       /*  To match Windows */
 	typedef unsigned char  BYTE;
-    typedef BYTE  BOOLEAN;
-    typedef unsigned char UCHAR;
 	#define __packed __attribute__((packed))
-    typedef BYTE * LPBYTE;
-    #define HIWORD(x) (WORD)(((x)>>16) & 0xffff)
-    #define LOWORD(x) (WORD)((x) & 0xffff)
+	#define HIWORD(x) (unsigned short)(((x)>>16) & 0xffff)
+	#define LOWORD(x) (unsigned short)((x) & 0xffff)
 #endif

 #ifdef _IS_WINDOWS_
@ -118,7 +111,6 @@
 #endif
 #endif /* _IS_WINDOWS_ */

-    
 #ifndef TRUE
   #define TRUE 1
   #define FALSE 0
--- a/drivers/staging/ced1401/usb1401.c
+++ b/drivers/staging/ced1401/usb1401.c
--- a/drivers/staging/ced1401/usb1401.h
+++ b/drivers/staging/ced1401/usb1401.h
@ -26,31 +26,32 @@
 #define UINT unsigned int
 #endif

-/// Device type codes, but these don't need to be extended - a succession is assumed
-/// These are set for usb from the bcdDevice field (suitably mangled). Future devices
-/// will be added in order of device creation to the list, so the names here are just
-/// to help use remember which device is which. The U14ERR_... values follow the same
-/// pattern for modern devices.
-#define TYPEUNKNOWN        -1             // dont know
-#define TYPE1401           0              // standard 1401
-#define TYPEPLUS           1              // 1401 plus
-#define TYPEU1401          2              // u1401
-#define TYPEPOWER          3              // Power1401
-#define TYPEU14012         4              // u1401 mkII
-#define TYPEPOWER2         5              // Power1401 mk II
-#define TYPEMICRO3         6              // Micro1401-3
-#define TYPEPOWER3         7              // Power1401-3
+/** Device type codes, but these don't need to be extended - a succession is assumed
+** These are set for usb from the bcdDevice field (suitably mangled). Future devices
+** will be added in order of device creation to the list, so the names here are just
+** to help use remember which device is which. The U14ERR_... values follow the same
+** pattern for modern devices.a
+**/
+#define TYPEUNKNOWN        -1             /*  dont know */
+#define TYPE1401           0              /*  standard 1401 */
+#define TYPEPLUS           1              /*  1401 plus */
+#define TYPEU1401          2              /*  u1401 */
+#define TYPEPOWER          3              /*  Power1401 */
+#define TYPEU14012         4              /*  u1401 mkII */
+#define TYPEPOWER2         5              /*  Power1401 mk II */
+#define TYPEMICRO3         6              /*  Micro1401-3 */
+#define TYPEPOWER3         7              /*  Power1401-3 */

-/// Some useful defines of constants. DONT FORGET to change the version in the
-/// resources whenever you change it here!.
-#define DRIVERMAJREV      2             // driver revision level major (match windows)
-#define DRIVERMINREV      0             // driver revision level minor
+/*  Some useful defines of constants. DONT FORGET to change the version in the */
+/*  resources whenever you change it here!. */
+#define DRIVERMAJREV      2             /*  driver revision level major (match windows) */
+#define DRIVERMINREV      0             /*  driver revision level minor */

-/// Definitions of the various block transfer command codes
-#define TM_EXTTOHOST    8               // extended tohost
-#define TM_EXTTO1401    9               // extended to1401
+/*  Definitions of the various block transfer command codes */
+#define TM_EXTTOHOST    8               /*  extended tohost */
+#define TM_EXTTO1401    9               /*  extended to1401 */

-/// Definitions of values in usbReqtype. Used in sorting out setup actions
+/*  Definitions of values in usbReqtype. Used in sorting out setup actions */
 #define H_TO_D 0x00
 #define D_TO_H 0x80
 #define VENDOR 0x40
@ -58,7 +59,7 @@
 #define INTREQ 0x01
 #define ENDREQ 0x02

-/// Definition of values in usbRequest, again used to sort out setup
+/*  Definition of values in usbRequest, again used to sort out setup */
 #define GET_STATUS      0x00
 #define CLEAR_FEATURE   0x01
 #define SET_FEATURE     0x03
@ -71,8 +72,8 @@
 #define SET_INTERFACE   0x0b
 #define SYNCH_FRAME     0x0c

-/// Definitions of the various debug command codes understood by the 1401. These
-/// are used in various vendor-specific commands to achieve the desired effect
+/*  Definitions of the various debug command codes understood by the 1401. These */
+/*  are used in various vendor-specific commands to achieve the desired effect */
 #define DB_GRAB         0x50            /* Grab is a NOP for USB */
 #define DB_FREE         0x51            /* Free is a NOP for the USB */
 #define DB_SETADD       0x52            /* Set debug address (double) */
@ -91,37 +92,34 @@
 #define CR_CHAR          0x0D           /* The carriage return character */
 #define CR_CHAR_80       0x8d           /*  and with bit 7 set */

-/// A structure holding information about a block of memory for use in circular transfers
-typedef struct circBlk
-{
+/*  A structure holding information about a block of memory for use in circular transfers */
+typedef struct circBlk {
 	volatile UINT dwOffset;             /* Offset within area of block start */
 	volatile UINT dwSize;               /* Size of the block, in bytes (0 = unused) */
 } CIRCBLK;

-/// A structure holding all of the information about a transfer area - an area of
-///  memory set up for use either as a source or destination in DMA transfers.
-typedef struct transarea
-{
-    void*       lpvBuff;                // User address of xfer area saved for completeness
-    UINT        dwBaseOffset;           // offset to start of xfer area in first page
-    UINT        dwLength;               // Length of xfer area, in bytes
-    struct page **pPages;               // Points at array of locked down pages
-    int         nPages;                 // number of pages that are locked down
-    bool        bUsed;                  // Is this structure in use?
-    bool        bCircular;              // Is this area for circular transfers?
-    bool        bCircToHost;            // Flag for direction of circular transfer
-    bool        bEventToHost;           // Set event on transfer to host?
-    int         iWakeUp;                // Set 1 on event, cleared by TestEvent()
-    UINT        dwEventSt;              // Defines section within xfer area for...
-    UINT        dwEventSz;              // ...notification by the event SZ is 0 if unset
-    CIRCBLK     aBlocks[2];             // Info on a pair of circular blocks
-    wait_queue_head_t wqEvent;          // The wait queue for events in this area MUST BE LAST
+/*  A structure holding all of the information about a transfer area - an area of */
+/*   memory set up for use either as a source or destination in DMA transfers. */
+typedef struct transarea {
+	void	*lpvBuff;                /*  User address of xfer area saved for completeness */
+	UINT        dwBaseOffset;           /*  offset to start of xfer area in first page */
+	UINT        dwLength;               /*  Length of xfer area, in bytes */
+	struct page **pPages;               /*  Points at array of locked down pages */
+	int         nPages;                 /*  number of pages that are locked down */
+	bool        bUsed;                  /*  Is this structure in use? */
+	bool        bCircular;              /*  Is this area for circular transfers? */
+	bool        bCircToHost;            /*  Flag for direction of circular transfer */
+	bool        bEventToHost;           /*  Set event on transfer to host? */
+	int         iWakeUp;                /*  Set 1 on event, cleared by TestEvent() */
+	UINT        dwEventSt;              /*  Defines section within xfer area for... */
+	UINT        dwEventSz;              /*  ...notification by the event SZ is 0 if unset */
+	CIRCBLK     aBlocks[2];             /*  Info on a pair of circular blocks */
+	wait_queue_head_t wqEvent;          /*  The wait queue for events in this area MUST BE LAST */
 } TRANSAREA;

-/// The DMADESC structure is used to hold information on the transfer in progress. It
-/// is set up by ReadDMAInfo, using information sent by the 1401 in an escape sequence.
-typedef struct dmadesc
-{
+/*  The DMADESC structure is used to hold information on the transfer in progress. It */
+/*  is set up by ReadDMAInfo, using information sent by the 1401 in an escape sequence. */
+typedef struct dmadesc {
 	unsigned short wTransType;          /* transfer type as TM_xxx above        */
 	unsigned short wIdent;              /* identifier word                      */
 	unsigned int   dwSize;              /* bytes to transfer                    */
@ -131,12 +129,11 @@ typedef struct dmadesc

 #define INBUF_SZ         256            /* input buffer size */
 #define OUTBUF_SZ        256            /* output buffer size */
-#define STAGED_SZ 0x10000               // size of coherent buffer for staged transfers
+#define STAGED_SZ 0x10000               /*  size of coherent buffer for staged transfers */

-/// Structure to hold all of our device specific stuff. We are making this as similar as we
-/// can to the Windows driver to help in our understanding of what is going on.
-typedef struct _DEVICE_EXTENSION
-{
+/*  Structure to hold all of our device specific stuff. We are making this as similar as we */
+/*  can to the Windows driver to help in our understanding of what is going on. */
+typedef struct _DEVICE_EXTENSION {
 	char inputBuffer[INBUF_SZ];         /* The two buffers */
 	char outputBuffer[OUTBUF_SZ];       /* accessed by the host functions */
 	volatile unsigned int dwNumInput;   /* num of chars in input buffer   */
@ -148,10 +145,10 @@ typedef struct _DEVICE_EXTENSION

 	volatile bool bSendCharsPending;    /* Flag to indicate sendchar active */
 	volatile bool bReadCharsPending;    /* Flag to indicate a read is primed */
-    char* pCoherCharOut;                /* special aligned buffer for chars to 1401 */
-    struct urb* pUrbCharOut;            /* urb used for chars to 1401 */
-    char* pCoherCharIn;                 /* special aligned buffer for chars to host */
-    struct urb* pUrbCharIn;             /* urb used for chars to host */
+	char *pCoherCharOut;                /* special aligned buffer for chars to 1401 */
+	struct urb *pUrbCharOut;            /* urb used for chars to 1401 */
+	char *pCoherCharIn;                 /* special aligned buffer for chars to host */
+	struct urb *pUrbCharIn;             /* urb used for chars to host */

 	spinlock_t charOutLock;             /* to protect the outputBuffer and outputting */
 	spinlock_t charInLock;              /* to protect the inputBuffer and char reads */
@ -159,71 +156,71 @@ typedef struct _DEVICE_EXTENSION

 	volatile unsigned int dwDMAFlag;    /* state of DMA */
 	TRANSAREA rTransDef[MAX_TRANSAREAS];/* transfer area info */
-    volatile DMADESC rDMAInfo;          // info on current DMA transfer
-    volatile bool bXFerWaiting;         // Flag set if DMA transfer stalled
-    volatile bool bInDrawDown;          // Flag that we want to halt transfers
+	volatile DMADESC rDMAInfo;          /*  info on current DMA transfer */
+	volatile bool bXFerWaiting;         /*  Flag set if DMA transfer stalled */
+	volatile bool bInDrawDown;          /*  Flag that we want to halt transfers */

-    // Parameters relating to a block read\write that is in progress. Some of these values
-    //  are equivalent to values in rDMAInfo. The values here are those in use, while those
-    //  in rDMAInfo are those received from the 1401 via an escape sequence. If another
-    //  escape sequence arrives before the previous xfer ends, rDMAInfo values are updated while these
-    //  are used to finish off the current transfer.
-    volatile short StagedId;            // The transfer area id for this transfer
-    volatile bool StagedRead;           // Flag TRUE for read from 1401, FALSE for write
-    volatile unsigned int StagedLength; // Total length of this transfer
-    volatile unsigned int StagedOffset; // Offset within memory area for transfer start
-    volatile unsigned int StagedDone;   // Bytes transferred so far
-    volatile bool bStagedUrbPending;    // Flag to indicate active
-    char* pCoherStagedIO;               // buffer used for block transfers
-    struct urb* pStagedUrb;             // The URB to use
-    spinlock_t stagedLock;              // protects ReadWriteMem() and circular buffer stuff
+	/*  Parameters relating to a block read\write that is in progress. Some of these values */
+	/*   are equivalent to values in rDMAInfo. The values here are those in use, while those */
+	/*   in rDMAInfo are those received from the 1401 via an escape sequence. If another */
+	/*   escape sequence arrives before the previous xfer ends, rDMAInfo values are updated while these */
+	/*   are used to finish off the current transfer. */
+	volatile short StagedId;            /*  The transfer area id for this transfer */
+	volatile bool StagedRead;           /*  Flag TRUE for read from 1401, FALSE for write */
+	volatile unsigned int StagedLength; /*  Total length of this transfer */
+	volatile unsigned int StagedOffset; /*  Offset within memory area for transfer start */
+	volatile unsigned int StagedDone;   /*  Bytes transferred so far */
+	volatile bool bStagedUrbPending;    /*  Flag to indicate active */
+	char *pCoherStagedIO;               /*  buffer used for block transfers */
+	struct urb *pStagedUrb;             /*  The URB to use */
+	spinlock_t stagedLock;              /*  protects ReadWriteMem() and circular buffer stuff */

-    short s1401Type;                    // type of 1401 attached
-    short sCurrentState;                // current error state
-    bool bIsUSB2;                       // type of the interface we connect to
-    bool bForceReset;                   // Flag to make sure we get a real reset
-    __u32 statBuf[2];                   // buffer for 1401 state info
+	short s1401Type;                    /*  type of 1401 attached */
+	short sCurrentState;                /*  current error state */
+	bool bIsUSB2;                       /*  type of the interface we connect to */
+	bool bForceReset;                   /*  Flag to make sure we get a real reset */
+	__u32 statBuf[2];                   /*  buffer for 1401 state info */

-    unsigned long ulSelfTestTime;       // used to timeout self test
+	unsigned long ulSelfTestTime;       /*  used to timeout self test */

-    int nPipes;                         // Should be 3 or 4 depending on 1401 usb chip
-    int bPipeError[4];                  // set non-zero if an error on one of the pipe
-    __u8 epAddr[4];                     // addresses of the 3/4 end points
+	int nPipes;                         /*  Should be 3 or 4 depending on 1401 usb chip */
+	int bPipeError[4];                  /*  set non-zero if an error on one of the pipe */
+	__u8 epAddr[4];                     /*  addresses of the 3/4 end points */

-    struct usb_device *udev;            // the usb device for this device
-    struct usb_interface *interface;    // the interface for this device, NULL if removed
-    struct usb_anchor submitted;        // in case we need to retract our submissions
-    struct mutex io_mutex;              // synchronize I/O with disconnect, one user-mode caller at a time
+	struct usb_device *udev;            /*  the usb device for this device */
+	struct usb_interface *interface;    /*  the interface for this device, NULL if removed */
+	struct usb_anchor submitted;        /*  in case we need to retract our submissions */
+	struct mutex io_mutex;              /*  synchronize I/O with disconnect, one user-mode caller at a time */

-    int    errors;                      // the last request tanked
-    int    open_count;                  // count the number of openers
-    spinlock_t err_lock;                // lock for errors
+	int    errors;                      /*  the last request tanked */
+	int    open_count;                  /*  count the number of openers */
+	spinlock_t err_lock;                /*  lock for errors */
 	struct kref kref;
-}DEVICE_EXTENSION, *PDEVICE_EXTENSION;
+} DEVICE_EXTENSION, *PDEVICE_EXTENSION;
 #define to_DEVICE_EXTENSION(d) container_of(d, DEVICE_EXTENSION, kref)

-/// Definitions of routimes used between compilation object files
-// in usb1401.c
-extern int Allowi(DEVICE_EXTENSION* pdx);
-extern int SendChars(DEVICE_EXTENSION* pdx);
+/*  Definitions of routimes used between compilation object files */
+/*  in usb1401.c */
+extern int Allowi(DEVICE_EXTENSION *pdx);
+extern int SendChars(DEVICE_EXTENSION *pdx);
 extern void ced_draw_down(DEVICE_EXTENSION *pdx);
 extern int ReadWriteMem(DEVICE_EXTENSION *pdx, bool Read, unsigned short wIdent,
 				unsigned int dwOffs, unsigned int dwLen);

-// in ced_ioc.c
+/*  in ced_ioc.c */
 extern int ClearArea(DEVICE_EXTENSION *pdx, int nArea);
-extern int SendString(DEVICE_EXTENSION* pdx, const char __user* pData, unsigned int n);
+extern int SendString(DEVICE_EXTENSION *pdx, const char __user *pData, unsigned int n);
 extern int SendChar(DEVICE_EXTENSION *pdx, char c);
-extern int Get1401State(DEVICE_EXTENSION* pdx, __u32* state, __u32* error);
+extern int Get1401State(DEVICE_EXTENSION *pdx, __u32 *state, __u32 *error);
 extern int ReadWrite_Cancel(DEVICE_EXTENSION *pdx);
-extern bool Is1401(DEVICE_EXTENSION* pdx);
-extern bool QuickCheck(DEVICE_EXTENSION* pdx, bool bTestBuff, bool bCanReset);
+extern bool Is1401(DEVICE_EXTENSION *pdx);
+extern bool QuickCheck(DEVICE_EXTENSION *pdx, bool bTestBuff, bool bCanReset);
 extern int Reset1401(DEVICE_EXTENSION *pdx);
 extern int GetChar(DEVICE_EXTENSION *pdx);
-extern int GetString(DEVICE_EXTENSION *pdx, char __user* pUser, int n);
+extern int GetString(DEVICE_EXTENSION *pdx, char __user *pUser, int n);
 extern int SetTransfer(DEVICE_EXTENSION *pdx, TRANSFERDESC __user *pTD);
 extern int UnsetTransfer(DEVICE_EXTENSION *pdx, int nArea);
-extern int SetEvent(DEVICE_EXTENSION *pdx, TRANSFEREVENT __user*pTE);
+extern int SetEvent(DEVICE_EXTENSION *pdx, TRANSFEREVENT __user *pTE);
 extern int Stat1401(DEVICE_EXTENSION *pdx);
 extern int LineCount(DEVICE_EXTENSION *pdx);
 extern int GetOutBufSpace(DEVICE_EXTENSION *pdx);
@ -235,15 +232,15 @@ extern int StartSelfTest(DEVICE_EXTENSION *pdx);
 extern int CheckSelfTest(DEVICE_EXTENSION *pdx, TGET_SELFTEST __user *pGST);
 extern int TypeOf1401(DEVICE_EXTENSION *pdx);
 extern int TransferFlags(DEVICE_EXTENSION *pdx);
-extern int DbgPeek(DEVICE_EXTENSION *pdx, TDBGBLOCK __user* pDB);
+extern int DbgPeek(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB);
 extern int DbgPoke(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB);
 extern int DbgRampData(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB);
 extern int DbgRampAddr(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB);
 extern int DbgGetData(DEVICE_EXTENSION *pdx, TDBGBLOCK __user *pDB);
 extern int DbgStopLoop(DEVICE_EXTENSION *pdx);
 extern int SetCircular(DEVICE_EXTENSION *pdx, TRANSFERDESC __user *pTD);
-extern int GetCircBlock(DEVICE_EXTENSION *pdx, TCIRCBLOCK __user* pCB);
-extern int FreeCircBlock(DEVICE_EXTENSION *pdx, TCIRCBLOCK __user* pCB);
+extern int GetCircBlock(DEVICE_EXTENSION *pdx, TCIRCBLOCK __user *pCB);
+extern int FreeCircBlock(DEVICE_EXTENSION *pdx, TCIRCBLOCK __user *pCB);
 extern int WaitEvent(DEVICE_EXTENSION *pdx, int nArea, int msTimeOut);
 extern int TestEvent(DEVICE_EXTENSION *pdx, int nArea);
 #endif
--- a/drivers/staging/ced1401/use1401.h
+++ b/drivers/staging/ced1401/use1401.h
@ -11,16 +11,16 @@
 #define __USE1401_H__
 #include "machine.h"

-// Some definitions to make things compatible. If you want to use Use1401 directly
-//  from a Windows program you should define U14_NOT_DLL, in which case you also
-//  MUST make sure that your application startup code calls U14InitLib().
-// DLL_USE1401 is defined when you are building the Use1401 dll, not otherwise.
+/*  Some definitions to make things compatible. If you want to use Use1401 directly */
+/*   from a Windows program you should define U14_NOT_DLL, in which case you also */
+/*   MUST make sure that your application startup code calls U14InitLib(). */
+/*  DLL_USE1401 is defined when you are building the Use1401 dll, not otherwise. */
 #ifdef _IS_WINDOWS_
 #ifndef U14_NOT_DLL
 #ifdef DLL_USE1401
-#define U14API(retType) retType DllExport __stdcall
+#define U14API(retType) (retType DllExport __stdcall)
 #else
-#define U14API(retType) retType DllImport __stdcall
+#define U14API(retType) (retType DllImport __stdcall)
 #endif
 #endif

@ -36,7 +36,7 @@
 #ifdef _QT
 #ifndef U14_NOT_DLL
 #undef U14API
-#define U14API(retType) retType __declspec(dllimport) __stdcall
+#define U14API(retType) (retType __declspec(dllimport) __stdcall)
 #endif
 #undef U14LONG
 #define U14LONG int
@ -50,20 +50,20 @@
 #define U14LONG long
 #endif

-/// Error codes: We need them here as user space can see them.
-#define U14ERR_NOERROR        0             // no problems
+/* Error codes: We need them here as user space can see them. */
+#define U14ERR_NOERROR        0             /*  no problems */

-/// Device error codes, but these don't need to be extended - a succession is assumed
-#define U14ERR_STD            4              // standard 1401 connected
-#define U14ERR_U1401          5              // u1401 connected
-#define U14ERR_PLUS           6              // 1401 plus connected
-#define U14ERR_POWER          7              // Power1401 connected
-#define U14ERR_U14012         8              // u1401 mkII connected
+/* Device error codes, but these don't need to be extended - a succession is assumed */
+#define U14ERR_STD            4              /*  standard 1401 connected */
+#define U14ERR_U1401          5              /*  u1401 connected */
+#define U14ERR_PLUS           6              /*  1401 plus connected */
+#define U14ERR_POWER          7              /*  Power1401 connected */
+#define U14ERR_U14012         8              /*  u1401 mkII connected */
 #define U14ERR_POWER2         9
 #define U14ERR_U14013        10
 #define U14ERR_POWER3        11

-/// NBNB Error numbers need shifting as some linux error codes start at 512
+/* NBNB Error numbers need shifting as some linux error codes start at 512 */
 #define U14ERR(n)             (n+U14ERRBASE)
 #define U14ERR_OFF            U14ERR(0)      /* 1401 there but switched off    */
 #define U14ERR_NC             U14ERR(-1)     /* 1401 not connected             */
@ -113,7 +113,7 @@
 #define U14ERR_DRIVCOMMS      U14ERR(-110)   /* failed talking to driver       */
 #define U14ERR_OUTOFMEMORY    U14ERR(-111)   /* needed memory and couldnt get it*/

-/// 1401 type codes.
+/* / 1401 type codes. */
 #define U14TYPE1401           0           /* standard 1401                  */
 #define U14TYPEPLUS           1           /* 1401 plus                      */
 #define U14TYPEU1401          2           /* u1401                          */
@ -124,9 +124,9 @@
 #define U14TYPEPOWER3         7           /* power1401-3                    */
 #define U14TYPEUNKNOWN        -1          /* dont know                      */

-/// Transfer flags to allow driver capabilities to be interrogated
+/* Transfer flags to allow driver capabilities to be interrogated */

-/// Constants for transfer flags
+/* Constants for transfer flags */
 #define U14TF_USEDMA          1           /* Transfer flag for use DMA      */
 #define U14TF_MULTIA          2           /* Transfer flag for multi areas  */
 #define U14TF_FIFO            4           /* for FIFO interface card        */
@ -138,18 +138,18 @@
 #define U14TF_DIAG            256         /* Diagnostics/debug functions    */
 #define U14TF_CIRC14          512         /* Circular-mode to 1401          */

-/// Definitions of element sizes for DMA transfers - to allow byte-swapping
+/* Definitions of element sizes for DMA transfers - to allow byte-swapping */
 #define ESZBYTES              0           /* BYTE element size value        */
-#define ESZWORDS              1           /* WORD element size value        */
+#define ESZWORDS              1           /* unsigned short element size value        */
 #define ESZLONGS              2           /* long element size value        */
 #define ESZUNKNOWN            0           /* unknown element size value     */

-/// These define required access types for the debug/diagnostics function
+/* These define required access types for the debug/diagnostics function */
 #define BYTE_SIZE             1           /* 8-bit access                   */
 #define WORD_SIZE             2           /* 16-bit access                  */
 #define LONG_SIZE             3           /* 32-bit access                  */

-/// Stuff used by U14_GetTransfer
+/* Stuff used by U14_GetTransfer */
 #define GET_TX_MAXENTRIES  257          /* (max length / page size + 1) */

 #ifdef _IS_WINDOWS_
@ -200,8 +200,8 @@ typedef struct TGetTxBlock              /* used for U14_GetTransfer results */
 extern "C" {
 #endif

-U14API(int)   U14WhenToTimeOut(short hand);         // when to timeout in ms
-U14API(short) U14PassedTime(int iTime);             // non-zero if iTime passed
+U14API(int)   U14WhenToTimeOut(short hand);         /*  when to timeout in ms */
+U14API(short)	U14PassedTime(int iTime);             /*  non-zero if iTime passed */

 U14API(short)	U14LastErrCode(short hand);

@ -210,42 +210,42 @@ U14API(short) U14Close1401(short hand);
 U14API(short)	U14Reset1401(short hand);
 U14API(short)	U14ForceReset(short hand);
 U14API(short)	U14TypeOf1401(short hand);
-U14API(short) U14NameOf1401(short hand, char* pBuf, WORD wMax);
+U14API(short)	U14NameOf1401(short hand, char *pBuf, unsigned short wMax);

 U14API(short)	U14Stat1401(short hand);
 U14API(short)	U14CharCount(short hand);
 U14API(short)	U14LineCount(short hand);

-U14API(short) U14SendString(short hand, const char* pString);
-U14API(short) U14GetString(short hand, char* pBuffer, WORD wMaxLen);
+U14API(short)	U14SendString(short hand, const char *pString);
+U14API(short)	U14GetString(short hand, char *pBuffer, unsigned short wMaxLen);
 U14API(short)	U14SendChar(short hand, char cChar);
-U14API(short) U14GetChar(short hand, char* pcChar);
+U14API(short)	U14GetChar(short hand, char *pcChar);

-U14API(short) U14LdCmd(short hand, const char* command);
-U14API(DWORD) U14Ld(short hand, const char* vl, const char* str);
+U14API(short)	U14LdCmd(short hand, const char *command);
+U14API(unsigned int) U14Ld(short hand, const char *vl, const char *str);

-U14API(short) U14SetTransArea(short hand, WORD wArea, void *pvBuff,
-                                            DWORD dwLength, short eSz);
-U14API(short) U14UnSetTransfer(short hand, WORD wArea);
-U14API(short) U14SetTransferEvent(short hand, WORD wArea, BOOL bEvent,
-                                  BOOL bToHost, DWORD dwStart, DWORD dwLength);
-U14API(int)   U14TestTransferEvent(short hand, WORD wArea);
-U14API(int)   U14WaitTransferEvent(short hand, WORD wArea, int msTimeOut);
+U14API(short)	U14SetTransArea(short hand, unsigned short wArea, void *pvBuff,
+					unsigned int dwLength, short eSz);
+U14API(short)	U14UnSetTransfer(short hand, unsigned short wArea);
+U14API(short)	U14SetTransferEvent(short hand, unsigned short wArea, BOOL bEvent,
+					BOOL bToHost, unsigned int dwStart, unsigned int dwLength);
+U14API(int)   U14TestTransferEvent(short hand, unsigned short wArea);
+U14API(int)   U14WaitTransferEvent(short hand, unsigned short wArea, int msTimeOut);
 U14API(short)	U14GetTransfer(short hand, TGET_TX_BLOCK *pTransBlock);

-U14API(short) U14ToHost(short hand, char* pAddrHost,DWORD dwSize,DWORD dw1401,
+U14API(short)	U14ToHost(short hand, char *pAddrHost, unsigned int dwSize, unsigned int dw1401,
 								short eSz);
-U14API(short) U14To1401(short hand, const char* pAddrHost,DWORD dwSize,DWORD dw1401,
+U14API(short)	U14To1401(short hand, const char *pAddrHost, unsigned int dwSize, unsigned int dw1401,
 								short eSz);

-U14API(short) U14SetCircular(short hand, WORD wArea, BOOL bToHost, void *pvBuff,
-                                         DWORD dwLength);
+U14API(short)	U14SetCircular(short hand, unsigned short wArea, BOOL bToHost, void *pvBuff,
+							unsigned int dwLength);

-U14API(int)   U14GetCircBlk(short hand, WORD wArea, DWORD *pdwOffs);
-U14API(int)   U14FreeCircBlk(short hand, WORD wArea, DWORD dwOffs, DWORD dwSize,
-                                         DWORD *pdwOffs);
+U14API(int)   U14GetCircBlk(short hand, unsigned short wArea, unsigned int *pdwOffs);
+U14API(int)   U14FreeCircBlk(short hand, unsigned short wArea, unsigned int dwOffs, unsigned int dwSize,
+							unsigned int *pdwOffs);

-U14API(short) U14StrToLongs(const char* pszBuff, U14LONG *palNums, short sMaxLongs);
+U14API(short)	U14StrToLongs(const char *pszBuff, U14LONG *palNums, short sMaxLongs);
 U14API(short)	U14LongsFrom1401(short hand, U14LONG *palBuff, short sMaxLongs);

 U14API(void)  U14SetTimeout(short hand, int lTimeout);
@ -254,8 +254,8 @@ U14API(short) U14OutBufSpace(short hand);
 U14API(int)   U14BaseAddr1401(short hand);
 U14API(int)   U14DriverVersion(short hand);
 U14API(int)   U14DriverType(short hand);
-U14API(short) U14DriverName(short hand, char* pBuf, WORD wMax);
-U14API(short) U14GetUserMemorySize(short hand, DWORD *pMemorySize);
+U14API(short)	U14DriverName(short hand, char *pBuf, unsigned short wMax);
+U14API(short)	U14GetUserMemorySize(short hand, unsigned int *pMemorySize);
 U14API(short)	U14KillIO1401(short hand);

 U14API(short)	U14BlkTransState(short hand);
@ -263,21 +263,21 @@ U14API(short) U14StateOf1401(short hand);

 U14API(short)	U14Grab1401(short hand);
 U14API(short)	U14Free1401(short hand);
-U14API(short) U14Peek1401(short hand, DWORD dwAddr, int nSize, int nRepeats);
-U14API(short) U14Poke1401(short hand, DWORD dwAddr, DWORD dwValue, int nSize, int nRepeats);
-U14API(short) U14Ramp1401(short hand, DWORD dwAddr, DWORD dwDef, DWORD dwEnable, int nSize, int nRepeats);
-U14API(short) U14RampAddr(short hand, DWORD dwDef, DWORD dwEnable, int nSize, int nRepeats);
+U14API(short)	U14Peek1401(short hand, unsigned int dwAddr, int nSize, int nRepeats);
+U14API(short)	U14Poke1401(short hand, unsigned int dwAddr, unsigned int dwValue, int nSize, int nRepeats);
+U14API(short)	U14Ramp1401(short hand, unsigned int dwAddr, unsigned int dwDef, unsigned int dwEnable, int nSize, int nRepeats);
+U14API(short)	U14RampAddr(short hand, unsigned int dwDef, unsigned int dwEnable, int nSize, int nRepeats);
 U14API(short)	U14StopDebugLoop(short hand);
 U14API(short)	U14GetDebugData(short hand, U14LONG *plValue);

 U14API(short)	U14StartSelfTest(short hand);
 U14API(short)	U14CheckSelfTest(short hand, U14LONG *pData);
 U14API(short)	U14TransferFlags(short hand);
-U14API(void)  U14GetErrorString(short nErr, char* pStr, WORD wMax);
+U14API(void)  U14GetErrorString(short nErr, char *pStr, unsigned short wMax);
 U14API(int)   U14MonitorRev(short hand);
 U14API(void)  U14CloseAll(void);

-U14API(short) U14WorkingSet(DWORD dwMinKb, DWORD dwMaxKb);
+U14API(short)	U14WorkingSet(unsigned int dwMinKb, unsigned int dwMaxKb);
 U14API(int)   U14InitLib(void);

 #ifdef __cplusplus
@ -285,3 +285,4 @@ U14API(int)   U14InitLib(void);
 #endif

 #endif /* End of ifndef __USE1401_H__ */
+
--- a/drivers/staging/ced1401/use14_ioc.h
+++ b/drivers/staging/ced1401/use14_ioc.h
@ -19,234 +19,234 @@
 ** The IOCTL function codes from 0x80 to 0xFF are for developer use.
 */
 #define  FILE_DEVICE_CED1401    0x8001
-#define  FNNUMBASE              0x800
+						FNNUMBASE              0x800

-#define  U14_OPEN1401            CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_OPEN1401            CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE,               \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_CLOSE1401           CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_CLOSE1401           CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+1,             \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_SENDSTRING          CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_SENDSTRING          CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+2,             \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_RESET1401           CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_RESET1401           CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+3,             \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_GETCHAR             CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_GETCHAR             CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+4,             \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_SENDCHAR            CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_SENDCHAR            CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+5,             \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_STAT1401            CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_STAT1401            CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+6,             \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_LINECOUNT           CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_LINECOUNT           CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+7,             \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_GETSTRING           CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_GETSTRING           CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+8,             \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_REGCALLBACK         CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_REGCALLBACK         CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+9,             \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_GETMONITORBUF       CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_GETMONITORBUF       CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+10,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_SETTRANSFER         CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_SETTRANSFER         CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+11,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_UNSETTRANSFER       CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_UNSETTRANSFER       CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+12,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_SETTRANSEVENT       CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_SETTRANSEVENT       CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+13,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_GETOUTBUFSPACE      CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_GETOUTBUFSPACE      CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+14,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_GETBASEADDRESS      CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_GETBASEADDRESS      CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+15,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_GETDRIVERREVISION   CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_GETDRIVERREVISION   CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+16,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_GETTRANSFER         CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_GETTRANSFER         CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+17,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_KILLIO1401          CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_KILLIO1401          CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+18,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_BLKTRANSSTATE       CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_BLKTRANSSTATE       CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+19,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_BYTECOUNT           CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_BYTECOUNT           CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+20,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_ZEROBLOCKCOUNT      CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_ZEROBLOCKCOUNT      CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+21,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_STOPCIRCULAR        CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_STOPCIRCULAR        CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+22,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_STATEOF1401         CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_STATEOF1401         CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+23,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_REGISTERS1401       CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_REGISTERS1401       CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+24,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_GRAB1401            CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_GRAB1401            CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+25,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_FREE1401            CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_FREE1401            CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+26,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_STEP1401            CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_STEP1401            CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+27,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_SET1401REGISTERS    CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_SET1401REGISTERS    CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+28,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_STEPTILL1401        CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_STEPTILL1401        CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+29,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_SETORIN             CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_SETORIN             CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+30,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_STARTSELFTEST       CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_STARTSELFTEST       CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+31,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_CHECKSELFTEST       CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_CHECKSELFTEST       CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+32,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_TYPEOF1401          CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_TYPEOF1401          CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+33,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_TRANSFERFLAGS       CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_TRANSFERFLAGS       CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+34,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_DBGPEEK             CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_DBGPEEK             CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+35,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_DBGPOKE             CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_DBGPOKE             CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+36,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_DBGRAMPDATA         CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_DBGRAMPDATA         CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+37,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_DBGRAMPADDR         CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_DBGRAMPADDR         CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+38,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_DBGGETDATA          CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_DBGGETDATA          CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+39,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_DBGSTOPLOOP         CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_DBGSTOPLOOP         CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+40,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_FULLRESET           CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_FULLRESET           CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+41,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_SETCIRCULAR         CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_SETCIRCULAR         CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+42,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_GETCIRCBLK          CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_GETCIRCBLK          CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+43,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-#define  U14_FREECIRCBLK         CTL_CODE( FILE_DEVICE_CED1401,     \
+#define  U14_FREECIRCBLK         CTL_CODE(FILE_DEVICE_CED1401,     \
 						FNNUMBASE+44,            \
 						METHOD_BUFFERED,         \
 						FILE_ANY_ACCESS)

-//--------------- Structures that are shared with the driver -------------
+/*--------------- Structures that are shared with the driver ------------- */
 #pragma pack(1)

 typedef struct                  /* used for get/set standard 1401 registers */
@ -269,8 +269,7 @@ typedef union     /* to communicate with 1401 driver status & control funcs */

 typedef TCSBLOCK*  LPTCSBLOCK;

-typedef struct paramBlk
-{
+typedef struct paramBlk {
 	 short       sState;
 	 TCSBLOCK    csBlock;
 } PARAMBLK;
@ -279,21 +278,21 @@ typedef PARAMBLK*   PPARAMBLK;

 typedef struct TransferDesc          /* Structure and type for SetTransArea */
 {
-   WORD        wArea;            /* number of transfer area to set up       */
-   void FAR *  lpvBuff;          /* address of transfer area                */
-   DWORD       dwLength;         /* length of area to set up                */
+	unsigned short        wArea;            /* number of transfer area to set up       */
+	void FAR *lpvBuff;          /* address of transfer area                */
+	unsigned int       dwLength;         /* length of area to set up                */
 	short       eSize;            /* size to move (for swapping on MAC)      */
 } TRANSFERDESC;

-typedef TRANSFERDESC FAR *    LPTRANSFERDESC;
+typedef TRANSFERDESC FAR *LPTRANSFERDESC;

 /* This is the structure used to set up a transfer area */
 typedef struct VXTransferDesc    /* use1401.c and use1432x.x use only       */
 {
-   WORD        wArea;            /* number of transfer area to set up       */
-   WORD        wAddrSel;         /* 16 bit selector for area                */
-   DWORD       dwAddrOfs;        /* 32 bit offset for area start            */
-   DWORD       dwLength;         /* length of area to set up                */
+	unsigned short        wArea;            /* number of transfer area to set up       */
+	unsigned short        wAddrSel;         /* 16 bit selector for area                */
+	unsigned int       dwAddrOfs;        /* 32 bit offset for area start            */
+	unsigned int       dwLength;         /* length of area to set up                */
 } VXTRANSFERDESC;

 #pragma pack()
--- a/drivers/staging/ced1401/userspace/use1401.c
+++ b/drivers/staging/ced1401/userspace/use1401.c
@ -36,7 +36,7 @@
 ** Under Windows 9x and NT, Use1401 uses DeviceIoControl to get access to
 ** the 1401 driver. This has parameters for the device handle, the function
 ** code, an input pointer and byte count, an output pointer and byte count
-** and a pointer to a DWORD to hold the output byte count. Note that input
+** and a pointer to a unsigned int to hold the output byte count. Note that input
 ** and output are from the point-of-view of the driver, so the output stuff
 ** is used to read values from the 1401, not send to the 1401. The use of
 ** these parameters varies with the function in use and the operating
@ -250,7 +250,7 @@ static int iAttached = 0;                       // counts process attaches so ca
 static HANDLE aHand1401[MAX1401] = {0};         // handles for 1401s
 static HANDLE aXferEvent[MAX1401] = {0};        // transfer events for the 1401s
 static LPVOID apAreas[MAX1401][MAX_TRANSAREAS]; // Locked areas
-static DWORD  auAreas[MAX1401][MAX_TRANSAREAS]; // Size of locked areas
+static unsigned int  auAreas[MAX1401][MAX_TRANSAREAS]; // Size of locked areas
 static BOOL   bWindows9x = FALSE;               // if we are Windows 95 or better
 #ifdef _WIN64
 #define USE_NT_DIOC(ind) TRUE
@ -276,8 +276,8 @@ static int aHand1401[MAX1401] = {0};    // handles for 1401s
 typedef struct CmdHead          // defines header block on command
 {                               // for PC commands
   char   acBasic[5];           // BASIC information - needed to align things
-   WORD   wBasicSz;             // size as seen by BASIC
-   WORD   wCmdSize;             // size of the following info
+   unsigned short   wBasicSz;             // size as seen by BASIC
+   unsigned short   wCmdSize;             // size of the following info
 } __packed CMDHEAD;
 #pragma pack()                  // back to normal

@ -311,7 +311,7 @@ static short CheckHandle(short h)
 ****************************************************************************/
 static short U14Status1401(short sHand, LONG lCode, TCSBLOCK* pBlk)
 {
-    DWORD dwBytes = 0;
+    unsigned int dwBytes = 0;

    if ((sHand < 0) || (sHand >= MAX1401))  /* Check parameters */
        return U14ERR_BADHAND;
@ -345,7 +345,7 @@ static short U14Status1401(short sHand, LONG lCode, TCSBLOCK* pBlk)
 ****************************************************************************/
 static short U14Control1401(short sHand, LONG lCode, TCSBLOCK* pBlk)
 {
-    DWORD dwBytes = 0;
+    unsigned int dwBytes = 0;

    if ((sHand < 0) || (sHand >= MAX1401))              /* Check parameters */
        return U14ERR_BADHAND;
@ -455,7 +455,7 @@ static void TranslateString(char* pStr)
 ****************************************************************************/
 U14API(short) U14StrToLongs(const char* pszBuff, U14LONG *palNums, short sMaxLongs)
 {
-    WORD wChInd = 0;                // index into source
+    unsigned short wChInd = 0;                // index into source
    short sLgInd = 0;               // index into result longs

    while (pszBuff[wChInd] &&       // until we get to end of string...
@ -681,7 +681,7 @@ U14API(int) U14DriverType(short hand)
 ** U14DriverName
 ** Returns the driver type as 3 character (ISA, PCI, USB or HSS))
 ****************************************************************************/
-U14API(short) U14DriverName(short hand, char* pBuf, WORD wMax)
+U14API(short) U14DriverName(short hand, char* pBuf, unsigned short wMax)
 {
    char* pName;
    *pBuf = 0;                             // Start off with a blank string
@ -779,7 +779,7 @@ U14API(short)  U14Free1401(short hand)
 ** is called. After the peek is done, use U14GetDebugData to retrieve
 ** the results of the peek.
 ****************************************************************************/
-U14API(short) U14Peek1401(short hand, DWORD dwAddr, int nSize, int nRepeats)
+U14API(short) U14Peek1401(short hand, unsigned int dwAddr, int nSize, int nRepeats)
 {
    short sErr = CheckHandle(hand);
    if (sErr == U14ERR_NOERROR)
@ -813,7 +813,7 @@ U14API(short) U14Peek1401(short hand, DWORD dwAddr, int nSize, int nRepeats)
 ** If lRepeats is zero, the loop will continue until U14StopDebugLoop
 ** is called.
 ****************************************************************************/
-U14API(short) U14Poke1401(short hand, DWORD dwAddr, DWORD dwValue,
+U14API(short) U14Poke1401(short hand, unsigned int dwAddr, unsigned int dwValue,
                                      int nSize, int nRepeats)
 {
    short sErr = CheckHandle(hand);
@ -849,7 +849,7 @@ U14API(short) U14Poke1401(short hand, DWORD dwAddr, DWORD dwValue,
 ** DESCRIPTION  Cause the 1401 to loop, writing a ramp to a location.
 ** If lRepeats is zero, the loop will continue until U14StopDebugLoop.
 ****************************************************************************/
-U14API(short) U14Ramp1401(short hand, DWORD dwAddr, DWORD dwDef, DWORD dwEnable,
+U14API(short) U14Ramp1401(short hand, unsigned int dwAddr, unsigned int dwDef, unsigned int dwEnable,
                                      int nSize, int nRepeats)
 {
    short sErr = CheckHandle(hand);
@ -887,7 +887,7 @@ U14API(short) U14Ramp1401(short hand, DWORD dwAddr, DWORD dwDef, DWORD dwEnable,
 ** DESCRIPTION  Cause the 1401 to loop, reading from a ramping location.
 ** If lRepeats is zero, the loop will continue until U14StopDebugLoop
 ****************************************************************************/
-U14API(short) U14RampAddr(short hand, DWORD dwDef, DWORD dwEnable,
+U14API(short) U14RampAddr(short hand, unsigned int dwDef, unsigned int dwEnable,
                                      int nSize, int nRepeats)
 {
    short sErr = CheckHandle(hand);
@ -1024,7 +1024,7 @@ U14API(short) U14CheckSelfTest(short hand, U14LONG *pData)
 /****************************************************************************
 ** U14GetUserMemorySize
 ****************************************************************************/
-U14API(short) U14GetUserMemorySize(short hand, DWORD *pMemorySize)
+U14API(short) U14GetUserMemorySize(short hand, unsigned int *pMemorySize)
 {
    // The original 1401 used a different command for getting the size
    short sErr = U14SendString(hand, (asType1401[hand] == U14TYPE1401) ? "MEMTOP;" : "MEMTOP,?;");
@ -1061,7 +1061,7 @@ U14API(short) U14TypeOf1401(short hand)
 ** U14NameOf1401
 ** Returns the type of the 1401 as a string, blank if unknown
 ****************************************************************************/
-U14API(short) U14NameOf1401(short hand, char* pBuf, WORD wMax)
+U14API(short) U14NameOf1401(short hand, char* pBuf, unsigned short wMax)
 {
    short sErr = CheckHandle(hand);
    if (sErr == U14ERR_NOERROR)
@ -1207,7 +1207,7 @@ static short U14TryToOpen(int n1401, long* plRetVal, short* psHandle)
 {
    short sErr = U14ERR_NOERROR;
    HANDLE hDevice = INVALID_HANDLE_VALUE;
-    DWORD dwErr = 0;
+    unsigned int dwErr = 0;
    int nFirst, nLast, nDev = 0;        /* Used for the search for a 1401 */
    BOOL bOldName = FALSE;               /* start by looking for a modern driver */

@ -1262,7 +1262,7 @@ static short U14TryToOpen(int n1401, long* plRetVal, short* psHandle)
            }
            else
            {
-                DWORD dwe = GetLastError();     /* Get error code otherwise */
+                unsigned int dwe = GetLastError();     /* Get error code otherwise */
                if ((dwe != ERROR_FILE_NOT_FOUND) || (dwErr == 0))
                    dwErr = dwe;                /* Ignore repeats of 'not found' */
            }
@ -1454,7 +1454,7 @@ U14API(short) U14Close1401(short hand)
        U14Reset1401(hand);                     // in case an active transfer running
        for (j = 0; j < MAX_TRANSAREAS; ++j)    // Locate locked areas
            if (iAreaMask & (1 << j))           // And kill off any transfers
-                U14UnSetTransfer(hand, (WORD)j);
+                U14UnSetTransfer(hand, (unsigned short)j);
    }

 #ifdef _IS_WINDOWS_
@ -1581,7 +1581,7 @@ U14API(short) U14SendString(short hand, const char* pString)
        if (bSpaceToSend)
        {
            PARAMBLK    rData;
-            DWORD       dwBytes;
+            unsigned int       dwBytes;
            char        tstr[MAXSTRLEN+5];          /* Buffer for chars */

            if ((hand < 0) || (hand >= MAX1401))
@ -1592,18 +1592,18 @@ U14API(short) U14SendString(short hand, const char* pString)
 #ifndef _WIN64
                if (!USE_NT_DIOC(hand))             /* Using WIN 95 driver access? */
                {
-                    int iOK = DeviceIoControl(aHand1401[hand], (DWORD)U14_SENDSTRING,
+                    int iOK = DeviceIoControl(aHand1401[hand], (unsigned int)U14_SENDSTRING,
                                    NULL, 0, tstr, nChars,
                                    &dwBytes, NULL);
                    if (iOK)
-                        sErr = (dwBytes >= (DWORD)nChars) ? U14ERR_NOERROR : U14ERR_DRIVCOMMS;
+                        sErr = (dwBytes >= (unsigned int)nChars) ? U14ERR_NOERROR : U14ERR_DRIVCOMMS;
                    else
                        sErr = (short)GetLastError();
                }
                else
 #endif
                {
-                    int iOK = DeviceIoControl(aHand1401[hand],(DWORD)U14_SENDSTRING,
+                    int iOK = DeviceIoControl(aHand1401[hand],(unsigned int)U14_SENDSTRING,
                                    tstr, nChars,
                                    &rData,sizeof(PARAMBLK),&dwBytes,NULL);
                    if (iOK && (dwBytes >= sizeof(PARAMBLK)))
@ -1697,7 +1697,7 @@ U14API(short) U14SendChar(short hand, char cChar)
 **          error code. Any error from the device causes us to set up for
 **          a full reset.
 ****************************************************************************/
-U14API(short) U14GetString(short hand, char* pBuffer, WORD wMaxLen)
+U14API(short) U14GetString(short hand, char* pBuffer, unsigned short wMaxLen)
 {
    short sErr = CheckHandle(hand);
    if (sErr != U14ERR_NOERROR)             // If an error...
@ -1726,8 +1726,8 @@ U14API(short) U14GetString(short hand, char* pBuffer, WORD wMaxLen)
        {
            if (asLastRetCode[hand] == U14ERR_NOERROR)     /* all ok so far */
            {
-                DWORD       dwBytes = 0;
-                *((WORD *)pBuffer) = wMaxLen;       /* set up length */
+                unsigned int       dwBytes = 0;
+                *((unsigned short *)pBuffer) = wMaxLen;       /* set up length */
 #ifndef _WIN64
                if (!USE_NT_DIOC(hand))             /* Win 95 DIOC here ? */
                {
@ -1737,9 +1737,9 @@ U14API(short) U14GetString(short hand, char* pBuffer, WORD wMaxLen)
                    if (wMaxLen > MAXSTRLEN)        /* Truncate length */
                        wMaxLen = MAXSTRLEN;    

-                    *((WORD *)tstr) = wMaxLen;      /* set len */
+                    *((unsigned short *)tstr) = wMaxLen;      /* set len */

-                    iOK = DeviceIoControl(aHand1401[hand],(DWORD)U14_GETSTRING,
+                    iOK = DeviceIoControl(aHand1401[hand],(unsigned int)U14_GETSTRING,
                                    NULL, 0, tstr, wMaxLen+sizeof(short),
                                    &dwBytes, NULL);
                    if (iOK)                        /* Device IO control OK ? */
@ -1768,7 +1768,7 @@ U14API(short) U14GetString(short hand, char* pBuffer, WORD wMaxLen)
                        char* pMem = (char*)GlobalLock(hMem);
                        if (pMem)
                        {
-                            int iOK = DeviceIoControl(aHand1401[hand],(DWORD)U14_GETSTRING,
+                            int iOK = DeviceIoControl(aHand1401[hand],(unsigned int)U14_GETSTRING,
                                            NULL, 0, pMem, wMaxLen+sizeof(short),
                                            &dwBytes, NULL);
                            if (iOK)                /* Device IO control OK ? */
@ -1946,7 +1946,7 @@ U14API(short) U14LineCount(short hand)
 **       other functions after getting an error and before using
 **       this function.
 ****************************************************************************/
-U14API(void)  U14GetErrorString(short nErr, char* pStr, WORD wMax)
+U14API(void)  U14GetErrorString(short nErr, char* pStr, unsigned short wMax)
 {
    char    wstr[150];

@ -2105,7 +2105,7 @@ U14API(void)  U14GetErrorString(short nErr, char* pStr, WORD wMax)
        break;

    }
-    if ((WORD)strlen(wstr) >= wMax-1)  /* Check for string being too long */
+    if ((unsigned short)strlen(wstr) >= wMax-1)  /* Check for string being too long */
        wstr[wMax-1] = 0;                          /* and truncate it if so */
    strcpy(pStr, wstr);                       /* Return the error string */
 }
@ -2120,8 +2120,8 @@ U14API(short) U14GetTransfer(short hand, TGET_TX_BLOCK *pTransBlock)
 #ifdef _IS_WINDOWS_
    if (sErr == U14ERR_NOERROR)
    { 
-        DWORD dwBytes = 0;
-        BOOL bOK = DeviceIoControl(aHand1401[hand], (DWORD)U14_GETTRANSFER, NULL, 0, pTransBlock,
+        unsigned int dwBytes = 0;
+        BOOL bOK = DeviceIoControl(aHand1401[hand], (unsigned int)U14_GETTRANSFER, NULL, 0, pTransBlock,
                              sizeof(TGET_TX_BLOCK), &dwBytes, NULL);
    
        if (bOK && (dwBytes >= sizeof(TGET_TX_BLOCK)))
@ -2145,12 +2145,12 @@ U14API(short) U14GetTransfer(short hand, TGET_TX_BLOCK *pTransBlock)
 //     1 unable to access process (insufficient rights?)
 //     2 unable to read process working set
 //     3 unable to set process working set - bad parameters?
-U14API(short) U14WorkingSet(DWORD dwMinKb, DWORD dwMaxKb)
+U14API(short) U14WorkingSet(unsigned int dwMinKb, unsigned int dwMaxKb)
 {
 #ifdef _IS_WINDOWS_
    short sRetVal = 0;                      // 0 means all is OK
    HANDLE hProcess;
-    DWORD dwVer = GetVersion();
+    unsigned int dwVer = GetVersion();
 	if (dwVer & 0x80000000)                 // is this not NT?
        return 0;                           // then give up right now

@ -2164,8 +2164,8 @@ U14API(short) U14WorkingSet(DWORD dwMinKb, DWORD dwMaxKb)
        SIZE_T dwMinSize,dwMaxSize;
        if (GetProcessWorkingSetSize(hProcess, &dwMinSize, &dwMaxSize))
        {
-            DWORD dwMin = dwMinKb << 10;    // convert from kb to bytes
-            DWORD dwMax = dwMaxKb << 10;
+            unsigned int dwMin = dwMinKb << 10;    // convert from kb to bytes
+            unsigned int dwMax = dwMaxKb << 10;

            // if we get here, we have managed to read the current size
            if (dwMin > dwMinSize)          // need to change sizes?
@ -2200,7 +2200,7 @@ U14API(short) U14WorkingSet(DWORD dwMinKb, DWORD dwMaxKb)
 ** U14UnSetTransfer  Cancels a transfer area
 ** wArea    The index of a block previously used in by SetTransfer
 *****************************************************************************/
-U14API(short) U14UnSetTransfer(short hand, WORD wArea)
+U14API(short) U14UnSetTransfer(short hand, unsigned short wArea)
 {
    short sErr = CheckHandle(hand);
 #ifdef _IS_WINDOWS_
@ -2223,13 +2223,13 @@ U14API(short) U14UnSetTransfer(short hand, WORD wArea)

 /****************************************************************************
 ** U14SetTransArea      Sets an area up to be used for transfers
-** WORD  wArea     The area number to set up
+** unsigned short  wArea     The area number to set up
 ** void *pvBuff    The address of the buffer for the data.
-** DWORD dwLength  The length of the buffer for the data
+** unsigned int dwLength  The length of the buffer for the data
 ** short eSz       The element size (used for byte swapping on the Mac)
 ****************************************************************************/
-U14API(short) U14SetTransArea(short hand, WORD wArea, void *pvBuff,
-                                          DWORD dwLength, short eSz)
+U14API(short) U14SetTransArea(short hand, unsigned short wArea, void *pvBuff,
+                                          unsigned int dwLength, short eSz)
 {
    TRANSFERDESC td;
    short sErr = CheckHandle(hand);
@ -2254,7 +2254,7 @@ U14API(short) U14SetTransArea(short hand, WORD wArea, void *pvBuff,
 #ifndef _WIN64
    if (!USE_NT_DIOC(hand))                         /* Use Win 9x DIOC? */
    {
-        DWORD dwBytes;
+        unsigned int dwBytes;
        VXTRANSFERDESC vxDesc;                      /* Structure to pass to VXD */
        vxDesc.wArea = wArea;                       /* Copy across simple params */
        vxDesc.dwLength = dwLength;
@ -2264,10 +2264,10 @@ U14API(short) U14SetTransArea(short hand, WORD wArea, void *pvBuff,
            sErr = U14ERR_DRIVTOOOLD;
        else
        {
-            vxDesc.dwAddrOfs = (DWORD)pvBuff;       /* 32 bit offset */
+            vxDesc.dwAddrOfs = (unsigned int)pvBuff;       /* 32 bit offset */
            vxDesc.wAddrSel  = 0;

-            if (DeviceIoControl(aHand1401[hand], (DWORD)U14_SETTRANSFER,
+            if (DeviceIoControl(aHand1401[hand], (unsigned int)U14_SETTRANSFER,
                                pvBuff,dwLength,    /* Will translate pointer */
                                &vxDesc,sizeof(VXTRANSFERDESC),
                                &dwBytes,NULL))
@ -2285,13 +2285,13 @@ U14API(short) U14SetTransArea(short hand, WORD wArea, void *pvBuff,
 #endif
    {
        PARAMBLK rWork;
-        DWORD dwBytes;
+        unsigned int dwBytes;
        td.wArea = wArea;     /* Pure NT - put data into struct */
        td.lpvBuff = pvBuff;
        td.dwLength = dwLength;
        td.eSize = 0;                // Dummy element size

-        if (DeviceIoControl(aHand1401[hand],(DWORD)U14_SETTRANSFER,
+        if (DeviceIoControl(aHand1401[hand],(unsigned int)U14_SETTRANSFER,
                            &td,sizeof(TRANSFERDESC),
                            &rWork,sizeof(PARAMBLK),&dwBytes,NULL))
        {
@ -2344,8 +2344,8 @@ U14API(short) U14SetTransArea(short hand, WORD wArea, void *pvBuff,
 ** Returns 1 if an event handle exists, 0 if all OK and no event handle or
 ** a negative code for an error.
 ****************************************************************************/
-U14API(short) U14SetTransferEvent(short hand, WORD wArea, BOOL bEvent,
-                                  BOOL bToHost, DWORD dwStart, DWORD dwLength)
+U14API(short) U14SetTransferEvent(short hand, unsigned short wArea, BOOL bEvent,
+                                  BOOL bToHost, unsigned int dwStart, unsigned int dwLength)
 {
 #ifdef _IS_WINDOWS_
    TCSBLOCK csBlock;
@ -2416,7 +2416,7 @@ U14API(short) U14SetTransferEvent(short hand, WORD wArea, BOOL bEvent,
 ** Would a U14WaitTransferEvent() call return immediately? return 1 if so,
 ** 0 if not or a negative code if a problem.
 ****************************************************************************/
-U14API(int) U14TestTransferEvent(short hand, WORD wArea)
+U14API(int) U14TestTransferEvent(short hand, unsigned short wArea)
 {
 #ifdef _IS_WINDOWS_
    int iErr = CheckHandle(hand);
@ -2441,7 +2441,7 @@ U14API(int) U14TestTransferEvent(short hand, WORD wArea)
 ** Returns   If no event handle then return immediately. Else return 1 if
 **           timed out or 0=event, and a negative code if a problem.
 ****************************************************************************/
-U14API(int) U14WaitTransferEvent(short hand, WORD wArea, int msTimeOut)
+U14API(int) U14WaitTransferEvent(short hand, unsigned short wArea, int msTimeOut)
 {
 #ifdef _IS_WINDOWS_
    int iErr = CheckHandle(hand);
@ -2466,13 +2466,13 @@ U14API(int) U14WaitTransferEvent(short hand, WORD wArea, int msTimeOut)

 /****************************************************************************
 ** U14SetCircular    Sets an area up for circular DMA transfers
-** WORD  wArea          The area number to set up
+** unsigned short  wArea          The area number to set up
 ** BOOL  bToHost        Sets the direction of data transfer
 ** void *pvBuff        The address of the buffer for the data
-** DWORD dwLength       The length of the buffer for the data
+** unsigned int dwLength       The length of the buffer for the data
 ****************************************************************************/
-U14API(short) U14SetCircular(short hand, WORD wArea, BOOL bToHost,
-									void *pvBuff, DWORD dwLength)
+U14API(short) U14SetCircular(short hand, unsigned short wArea, BOOL bToHost,
+									void *pvBuff, unsigned int dwLength)
 {
    short sErr = CheckHandle(hand);
    if (sErr != U14ERR_NOERROR)
@ -2495,14 +2495,14 @@ U14API(short) U14SetCircular(short hand, WORD wArea, BOOL bToHost,
    else
    {
        PARAMBLK rWork;
-        DWORD dwBytes;
+        unsigned int dwBytes;
        TRANSFERDESC txDesc;
        txDesc.wArea = wArea;             /* Pure NT - put data into struct */
        txDesc.lpvBuff = pvBuff;
        txDesc.dwLength = dwLength;
        txDesc.eSize = (short)bToHost;       /* Use this for direction flag */
   
-        if (DeviceIoControl(aHand1401[hand],(DWORD)U14_SETCIRCULAR,
+        if (DeviceIoControl(aHand1401[hand],(unsigned int)U14_SETCIRCULAR,
                           &txDesc, sizeof(TRANSFERDESC),
                           &rWork, sizeof(PARAMBLK),&dwBytes,NULL))
        {
@ -2542,7 +2542,7 @@ U14API(short) U14SetCircular(short hand, WORD wArea, BOOL bToHost,
 ** Function  GetCircBlk returns the size (& start offset) of the next
 **           available block of circular data.
 ****************************************************************************/
-U14API(int) U14GetCircBlk(short hand, WORD wArea, DWORD *pdwOffs)
+U14API(int) U14GetCircBlk(short hand, unsigned short wArea, unsigned int *pdwOffs)
 {
    int lErr = CheckHandle(hand);
    if (lErr != U14ERR_NOERROR)
@ -2555,10 +2555,10 @@ U14API(int) U14GetCircBlk(short hand, WORD wArea, DWORD *pdwOffs)
 #ifdef _IS_WINDOWS_
        PARAMBLK rWork;
        TCSBLOCK csBlock;
-        DWORD dwBytes;
+        unsigned int dwBytes;
        csBlock.longs[0] = wArea;               // Area number into control block
        rWork.sState = U14ERR_DRIVCOMMS;
-        if (DeviceIoControl(aHand1401[hand], (DWORD)U14_GETCIRCBLK, &csBlock, sizeof(TCSBLOCK), &rWork, sizeof(PARAMBLK), &dwBytes, NULL) &&
+        if (DeviceIoControl(aHand1401[hand], (unsigned int)U14_GETCIRCBLK, &csBlock, sizeof(TCSBLOCK), &rWork, sizeof(PARAMBLK), &dwBytes, NULL) &&
           (dwBytes >= sizeof(PARAMBLK)))
            lErr = rWork.sState;
        else
@ -2591,8 +2591,8 @@ U14API(int) U14GetCircBlk(short hand, WORD wArea, DWORD *pdwOffs)
 **           resuse for circular transfers and returns the size (& start
 **           offset) of the next available block of circular data.
 ****************************************************************************/
-U14API(int) U14FreeCircBlk(short hand, WORD wArea, DWORD dwOffs, DWORD dwSize,
-                                        DWORD *pdwOffs)
+U14API(int) U14FreeCircBlk(short hand, unsigned short wArea, unsigned int dwOffs, unsigned int dwSize,
+                                        unsigned int *pdwOffs)
 {
    int lErr = CheckHandle(hand);
    if (lErr != U14ERR_NOERROR)
@ -2603,12 +2603,12 @@ U14API(int) U14FreeCircBlk(short hand, WORD wArea, DWORD dwOffs, DWORD dwSize,
 #ifdef _IS_WINDOWS_
        PARAMBLK rWork;
        TCSBLOCK csBlock;
-        DWORD dwBytes;
+        unsigned int dwBytes;
        csBlock.longs[0] = wArea;               // Area number into control block
        csBlock.longs[1] = dwOffs;
        csBlock.longs[2] = dwSize;
        rWork.sState = U14ERR_DRIVCOMMS;
-        if (DeviceIoControl(aHand1401[hand], (DWORD)U14_FREECIRCBLK, &csBlock, sizeof(TCSBLOCK),
+        if (DeviceIoControl(aHand1401[hand], (unsigned int)U14_FREECIRCBLK, &csBlock, sizeof(TCSBLOCK),
                           &rWork, sizeof(PARAMBLK), &dwBytes, NULL) &&
           (dwBytes >= sizeof(PARAMBLK)))
           lErr = rWork.sState;
@ -2647,7 +2647,7 @@ U14API(int) U14FreeCircBlk(short hand, WORD wArea, DWORD dwOffs, DWORD dwSize,
 ** which it should be to get a pointer
 *****************************************************************************/
 static short Transfer(short hand, BOOL bTo1401, char* pData,
-                       DWORD dwSize, DWORD dw1401, short eSz)
+                       unsigned int dwSize, unsigned int dw1401, short eSz)
 {
    char strcopy[MAXSTRLEN+1];          // to hold copy of work string
    short sResult = U14SetTransArea(hand, 0, (void *)pData, dwSize, eSz);
@ -2670,8 +2670,8 @@ static short Transfer(short hand, BOOL bTo1401, char* pData,
 /****************************************************************************
 ** Function  ToHost transfers data into the host from the 1401
 ****************************************************************************/
-U14API(short) U14ToHost(short hand, char* pAddrHost, DWORD dwSize,
-                                            DWORD dw1401, short eSz)
+U14API(short) U14ToHost(short hand, char* pAddrHost, unsigned int dwSize,
+                                            unsigned int dw1401, short eSz)
 {
    short sErr = CheckHandle(hand);
    if ((sErr == U14ERR_NOERROR) && dwSize) // TOHOST is a constant
@ -2682,8 +2682,8 @@ U14API(short) U14ToHost(short hand, char* pAddrHost, DWORD dwSize,
 /****************************************************************************
 ** Function  To1401 transfers data into the 1401 from the host
 ****************************************************************************/
-U14API(short) U14To1401(short hand, const char* pAddrHost,DWORD dwSize,
-                                    DWORD dw1401, short eSz)
+U14API(short) U14To1401(short hand, const char* pAddrHost,unsigned int dwSize,
+                                    unsigned int dw1401, short eSz)
 {
    short sErr = CheckHandle(hand);
    if ((sErr == U14ERR_NOERROR) && dwSize) // TO1401 is a constant
@ -2707,7 +2707,7 @@ U14API(short) U14To1401(short hand, const char* pAddrHost,DWORD dwSize,
 #define file_close(h)   close(h)
 #define file_seek(h, pos) lseek(h, pos, SEEK_SET) 
 #define file_read(h, buffer, size) (read(h, buffer, size) == (ssize_t)size)
-static DWORD GetModuleFileName(void* dummy, char* buffer, int max)
+static unsigned int GetModuleFileName(void* dummy, char* buffer, int max)
 {
    // The following works for Linux systems with a /proc file system.
    char szProcPath[32];
@ -2766,7 +2766,7 @@ U14API(short) U14LdCmd(short hand, const char* command)
    // application was run from.
    if (!bGotIt)                            // Still not got it?
    {
-        DWORD dwLen = GetModuleFileName(NULL, filnam, FNSZ); // Get app path
+        unsigned int dwLen = GetModuleFileName(NULL, filnam, FNSZ); // Get app path
        if (dwLen > 0)                      // and use it as path if found
        {
            char* pStr = strrchr(filnam, PATHSEP);    // Point to last separator
@ -2821,7 +2821,7 @@ U14API(short) U14LdCmd(short hand, const char* command)
                file_seek(iFHandle, sizeof(CMDHEAD));
                if (file_read(iFHandle, pMem, (UINT)nComSize))
                {
-                    sErr = U14SetTransArea(hand, 0, (void *)pMem, (DWORD)nComSize, ESZBYTES);
+                    sErr = U14SetTransArea(hand, 0, (void *)pMem, (unsigned int)nComSize, ESZBYTES);
                    if (sErr == U14ERR_NOERROR)
                    {
                        sprintf(strcopy, "CLOAD,0,$%X;", (int)nComSize);
@ -2858,9 +2858,9 @@ U14API(short) U14LdCmd(short hand, const char* command)
 ** Returns NOERROR code or a long with error in lo word and index of
 ** command that failed in high word
 ****************************************************************************/
-U14API(DWORD) U14Ld(short hand, const char* vl, const char* str)
+U14API(unsigned int) U14Ld(short hand, const char* vl, const char* str)
 {
-    DWORD dwIndex = 0;              // index to current command
+    unsigned int dwIndex = 0;              // index to current command
    long lErr = U14ERR_NOERROR;     // what the error was that went wrong
    char strcopy[MAXSTRLEN+1];      // stores unmodified str parameter
    char szFExt[8];                 // The command file extension
@ -2939,7 +2939,7 @@ U14API(DWORD) U14Ld(short hand, const char* vl, const char* str)
        return lErr;
    }
    else
-        return ((dwIndex<<16) | ((DWORD)lErr & 0x0000FFFF));
+        return ((dwIndex<<16) | ((unsigned int)lErr & 0x0000FFFF));
 }

 // Initialise the library (if not initialised) and return the library version
@ -2951,7 +2951,7 @@ U14API(int) U14InitLib(void)
        int i;
 #ifdef _IS_WINDOWS_
        int j;
-        DWORD   dwVersion = GetVersion();
+        unsigned int   dwVersion = GetVersion();
        bWindows9x = FALSE;                  // Assume not Win9x

        if (dwVersion & 0x80000000)                 // if not windows NT
@ -2993,12 +2993,12 @@ U14API(int) U14InitLib(void)
 #ifdef _IS_WINDOWS_
 #ifndef U14_NOT_DLL
 /****************************************************************************
-** FUNCTION: DllMain(HANDLE, DWORD, LPVOID)
+** FUNCTION: DllMain(HANDLE, unsigned int, LPVOID)
 ** LibMain is called by Windows when the DLL is initialized, Thread Attached,
 ** and other times. Refer to SDK documentation, as to the different ways this
 ** may be called.
 ****************************************************************************/
-INT APIENTRY DllMain(HANDLE hInst, DWORD ul_reason_being_called, LPVOID lpReserved)
+INT APIENTRY DllMain(HANDLE hInst, unsigned int ul_reason_being_called, LPVOID lpReserved)
 {
    int iRetVal = 1;

--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@ -110,15 +110,6 @@ menuconfig COMEDI_ISA_DRIVERS

 if COMEDI_ISA_DRIVERS

-config COMEDI_ACL7225B
-	tristate "ADlink NuDAQ ACL-7225b and compatibles support"
-	---help---
-	  Enable support for ADlink NuDAQ ACL-7225b and compatibles,
-	  ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called acl7225b.
-
 config COMEDI_PCL711
 	tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
 	---help---
@ -137,14 +128,6 @@ config COMEDI_PCL724
 	  To compile this driver as a module, choose M here: the module will be
 	  called pcl724.

-config COMEDI_PCL725
-	tristate "Advantech PCL-725 and compatible ISA card support"
-	---help---
-	  Enable support for Advantech PCL-725 and compatible ISA cards.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called pcl725.
-
 config COMEDI_PCL726
 	tristate "Advantech PCL-726 and compatible ISA card support"
 	---help---
@ -154,10 +137,21 @@ config COMEDI_PCL726
 	  called pcl726.

 config COMEDI_PCL730
-	tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
+	tristate "Simple Digital I/O board support (8-bit ports)"
 	---help---
-	  Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
-	  ACL-7130 ISA cards
+	  Enable support for various simple ISA or PC/104 Digital I/O boards.
+	  These boards all use 8-bit I/O ports.
+
+	  Advantech PCL-730   isolated - 16 in/16 out  ttl - 16 in/16 out
+	  ICP ISO-730         isolated - 16 in/16 out  ttl - 16 in/16 out
+	  ADlink ACL-7130     isolated - 16 in/16 out  ttl - 16 in/16 out
+	  Advantech PCM-3730  isolated - 8 in/8 out    ttl - 16 in/16 out
+	  Advantech PCL-725   isolated - 8 in/8 out
+	  ICP P8R8-DIO        isolated - 8 in/8 out
+	  ADlink ACL-7225b    isolated - 16 in/16 out
+	  ICP P16R16-DIO      isolated - 16 in/16 out
+	  Advantech PCL-733   isolated - 32 in
+	  Advantech PCL-734   isolated - 32 out

 	  To compile this driver as a module, choose M here: the module will be
 	  called pcl730.
@ -201,14 +195,6 @@ config COMEDI_PCM3724
 	  To compile this driver as a module, choose M here: the module will be
 	  called pcm3724.

-config COMEDI_PCM3730
-	tristate "Advantech PCM-3730 and clone PC/104 board support"
-	---help---
-	  Enable support for Advantech PCM-3730 and clone PC/104 boards
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called pcm3730.
-
 config COMEDI_AMPLC_DIO200_ISA
 	tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
 	select COMEDI_AMPLC_DIO200
@ -543,12 +529,19 @@ config COMEDI_POC
 	tristate "Generic driver for very simple devices"
 	---help---
 	  Enable generic support for very simple / POC (Piece of Crap) boards,
-	  Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
-	  PCL-734 (pcl734)
+	  Keithley Metrabyte DAC-02 (dac02).

 	  To compile this driver as a module, choose M here: the module will be
 	  called poc.

+config COMEDI_S526
+	tristate "Sensoray s526 support"
+	---help---
+	  Enable support for Sensoray s526
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called s526.
+
 endif # COMEDI_ISA_DRIVERS

 menuconfig COMEDI_PCI_DRIVERS
@ -1076,14 +1069,6 @@ config COMEDI_RTD520
 	  To compile this driver as a module, choose M here: the module will be
 	  called rtd520.

-config COMEDI_S526
-	tristate "Sensoray s526 support"
-	---help---
-	  Enable support for Sensoray s526
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called s526.
-
 config COMEDI_S626
 	tristate "Sensoray 626 support"
 	select COMEDI_FC
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@ -14,11 +14,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */

 #ifndef _COMEDI_H
--- a/drivers/staging/comedi/comedi_buf.c
+++ b/drivers/staging/comedi/comedi_buf.c
@ -13,10 +13,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

 #include "comedidev.h"
--- a/drivers/staging/comedi/comedi_compat32.c
+++ b/drivers/staging/comedi/comedi_compat32.c
@ -17,11 +17,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */

 #include <linux/uaccess.h>
--- a/drivers/staging/comedi/comedi_compat32.h
+++ b/drivers/staging/comedi/comedi_compat32.h
@ -17,11 +17,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */

 #ifndef _COMEDI_COMPAT32_H
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@ -14,11 +14,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */

 #undef DEBUG
@ -536,6 +531,23 @@ static bool comedi_is_subdevice_idle(struct comedi_subdevice *s)
 	return (runflags & (SRF_ERROR | SRF_RUNNING)) ? false : true;
 }

+/**
+ * comedi_alloc_spriv() - Allocate memory for the subdevice private data.
+ * @s: comedi_subdevice struct
+ * @size: size of the memory to allocate
+ *
+ * This also sets the subdevice runflags to allow the core to automatically
+ * free the private data during the detach.
+ */
+void *comedi_alloc_spriv(struct comedi_subdevice *s, size_t size)
+{
+	s->private = kzalloc(size, GFP_KERNEL);
+	if (s->private)
+		comedi_set_subdevice_runflags(s, ~0, SRF_FREE_SPRIV);
+	return s->private;
+}
+EXPORT_SYMBOL_GPL(comedi_alloc_spriv);
+
 /*
   This function restores a subdevice to an idle state.
 */
@ -665,7 +677,7 @@ static int do_bufconfig_ioctl(struct comedi_device *dev,
 	if (copy_from_user(&bc, arg, sizeof(bc)))
 		return -EFAULT;

-	if (bc.subdevice >= dev->n_subdevices || bc.subdevice < 0)
+	if (bc.subdevice >= dev->n_subdevices)
 		return -EINVAL;

 	s = &dev->subdevices[bc.subdevice];
@ -918,7 +930,7 @@ static int do_bufinfo_ioctl(struct comedi_device *dev,
 	if (copy_from_user(&bi, arg, sizeof(bi)))
 		return -EFAULT;

-	if (bi.subdevice >= dev->n_subdevices || bi.subdevice < 0)
+	if (bi.subdevice >= dev->n_subdevices)
 		return -EINVAL;

 	s = &dev->subdevices[bi.subdevice];
--- a/drivers/staging/comedi/comedi_pci.c
+++ b/drivers/staging/comedi/comedi_pci.c
@ -14,10 +14,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

 #include <linux/pci.h>
--- a/drivers/staging/comedi/comedi_pcmcia.c
+++ b/drivers/staging/comedi/comedi_pcmcia.c
@ -14,10 +14,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

 #include <linux/kernel.h>
--- a/drivers/staging/comedi/comedi_usb.c
+++ b/drivers/staging/comedi/comedi_usb.c
@ -14,10 +14,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

 #include <linux/usb.h>
@ -34,6 +30,18 @@ struct usb_interface *comedi_to_usb_interface(struct comedi_device *dev)
 }
 EXPORT_SYMBOL_GPL(comedi_to_usb_interface);

+/**
+ * comedi_to_usb_dev() - comedi_device pointer to usb_device pointer.
+ * @dev: comedi_device struct
+ */
+struct usb_device *comedi_to_usb_dev(struct comedi_device *dev)
+{
+	struct usb_interface *intf = comedi_to_usb_interface(dev);
+
+	return intf ? interface_to_usbdev(intf) : NULL;
+}
+EXPORT_SYMBOL_GPL(comedi_to_usb_dev);
+
 /**
 * comedi_usb_auto_config() - Configure/probe a comedi USB driver.
 * @intf: usb_interface struct
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@ -14,11 +14,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */

 #ifndef _COMEDIDEV_H
@ -270,11 +265,14 @@ enum subdevice_runflags {
 	/* indicates an COMEDI_CB_ERROR event has occurred since the last
 	 * command was started */
 	SRF_ERROR = 0x00000004,
-	SRF_RUNNING = 0x08000000
+	SRF_RUNNING = 0x08000000,
+	SRF_FREE_SPRIV = 0x80000000,	/* free s->private on detach */
 };

 bool comedi_is_subdevice_running(struct comedi_subdevice *s);

+void *comedi_alloc_spriv(struct comedi_subdevice *s, size_t size);
+
 int comedi_check_chanlist(struct comedi_subdevice *s,
 			  int n,
 			  unsigned int *chanlist);
@ -312,6 +310,18 @@ struct comedi_lrange {
 	struct comedi_krange range[GCC_ZERO_LENGTH_ARRAY];
 };

+static inline bool comedi_range_is_bipolar(struct comedi_subdevice *s,
+					   unsigned int range)
+{
+	return s->range_table->range[range].min < 0;
+}
+
+static inline bool comedi_range_is_unipolar(struct comedi_subdevice *s,
+					    unsigned int range)
+{
+	return s->range_table->range[range].min >= 0;
+}
+
 /* some silly little inline functions */

 static inline unsigned int bytes_per_sample(const struct comedi_subdevice *subd)
@ -349,7 +359,12 @@ void comedi_buf_memcpy_from(struct comedi_async *async, unsigned int offset,

 int comedi_alloc_subdevices(struct comedi_device *, int);

-void comedi_spriv_free(struct comedi_device *, int subdev_num);
+int comedi_load_firmware(struct comedi_device *, struct device *,
+			 const char *name,
+			 int (*cb)(struct comedi_device *,
+				   const u8 *data, size_t size,
+				   unsigned long context),
+			 unsigned long context);

 int __comedi_request_region(struct comedi_device *,
 			    unsigned long start, unsigned long len);
@ -489,6 +504,7 @@ struct usb_driver;
 struct usb_interface;

 struct usb_interface *comedi_to_usb_interface(struct comedi_device *);
+struct usb_device *comedi_to_usb_dev(struct comedi_device *);

 int comedi_usb_auto_config(struct usb_interface *, struct comedi_driver *,
 			   unsigned long context);
--- a/drivers/staging/comedi/comedilib.h
+++ b/drivers/staging/comedi/comedilib.h
@ -14,11 +14,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */

 #ifndef _LINUX_COMEDILIB_H
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@ -14,11 +14,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */

 #include <linux/device.h>
@ -38,6 +33,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/firmware.h>

 #include "comedidev.h"
 #include "comedi_internal.h"
@ -87,18 +83,6 @@ int comedi_alloc_subdevices(struct comedi_device *dev, int num_subdevices)
 }
 EXPORT_SYMBOL_GPL(comedi_alloc_subdevices);

-void comedi_spriv_free(struct comedi_device *dev, int subdev_num)
-{
-	struct comedi_subdevice *s;
-
-	if (dev->subdevices && subdev_num < dev->n_subdevices) {
-		s = &dev->subdevices[subdev_num];
-		kfree(s->private);
-		s->private = NULL;
-	}
-}
-EXPORT_SYMBOL_GPL(comedi_spriv_free);
-
 static void cleanup_device(struct comedi_device *dev)
 {
 	int i;
@ -107,6 +91,8 @@ static void cleanup_device(struct comedi_device *dev)
 	if (dev->subdevices) {
 		for (i = 0; i < dev->n_subdevices; i++) {
 			s = &dev->subdevices[i];
+			if (s->runflags & SRF_FREE_SPRIV)
+				kfree(s->private);
 			comedi_free_subdevice_minor(s);
 			if (s->async) {
 				comedi_buf_alloc(dev, s, 0);
@ -351,6 +337,38 @@ static void comedi_report_boards(struct comedi_driver *driv)
 		pr_info(" %s\n", driv->driver_name);
 }

+/**
+ * comedi_load_firmware() - Request and load firmware for a device.
+ * @dev: comedi_device struct
+ * @hw_device: device struct for the comedi_device
+ * @name: the name of the firmware image
+ * @cb: callback to the upload the firmware image
+ * @context: private context from the driver
+ */
+int comedi_load_firmware(struct comedi_device *dev,
+			 struct device *device,
+			 const char *name,
+			 int (*cb)(struct comedi_device *dev,
+				   const u8 *data, size_t size,
+				   unsigned long context),
+			 unsigned long context)
+{
+	const struct firmware *fw;
+	int ret;
+
+	if (!cb)
+		return -EINVAL;
+
+	ret = request_firmware(&fw, name, device);
+	if (ret == 0) {
+		ret = cb(dev, fw->data, fw->size, context);
+		release_firmware(fw);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(comedi_load_firmware);
+
 /**
 * __comedi_request_region() - Request an I/O reqion for a legacy driver.
 * @dev: comedi_device struct
--- a/drivers/staging/comedi/drivers/8253.h
+++ b/drivers/staging/comedi/drivers/8253.h
@ -14,11 +14,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */

 #ifndef _8253_H
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@ -14,11 +14,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */
 /*
 Driver: 8255
@ -81,7 +76,6 @@ I/O port base address can be found in the output of 'lspci -v'.
 #include "../comedidev.h"

 #include <linux/ioport.h>
-#include <linux/slab.h>

 #include "comedi_fc.h"
 #include "8255.h"
@ -290,15 +284,13 @@ int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
 {
 	struct subdev_8255_private *spriv;

-	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+	spriv = comedi_alloc_spriv(s, sizeof(*spriv));
 	if (!spriv)
 		return -ENOMEM;

 	spriv->iobase	= iobase;
 	spriv->io	= io ? io : subdev_8255_io;

-	s->private	= spriv;
-
 	s->type		= COMEDI_SUBD_DIO;
 	s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;
 	s->n_chan	= 24;
@ -391,7 +383,6 @@ static void dev_8255_detach(struct comedi_device *dev)
 			spriv = s->private;
 			release_region(spriv->iobase, _8255_SIZE);
 		}
-		comedi_spriv_free(dev, i);
 	}
 }

--- a/drivers/staging/comedi/drivers/8255.h
+++ b/drivers/staging/comedi/drivers/8255.h
@ -14,11 +14,6 @@
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
 */

 #ifndef _8255_H
--- a/drivers/staging/comedi/drivers/8255_pci.c
+++ b/drivers/staging/comedi/drivers/8255_pci.c
@ -19,10 +19,6 @@
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

 /*
@ -242,10 +238,7 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
 static void pci_8255_detach(struct comedi_device *dev)
 {
 	struct pci_8255_private *devpriv = dev->private;
-	int i;

-	for (i = 0; i < dev->n_subdevices; i++)
-		comedi_spriv_free(dev, i);
 	if (devpriv && devpriv->mmio_base)
 		iounmap(devpriv->mmio_base);
 	comedi_pci_disable(dev);
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@ -11,19 +11,16 @@ obj-$(CONFIG_COMEDI_SERIAL2002)		+= serial2002.o
 obj-$(CONFIG_COMEDI_SKEL)		+= skel.o

 # Comedi ISA drivers
-obj-$(CONFIG_COMEDI_ACL7225B)		+= acl7225b.o
 obj-$(CONFIG_COMEDI_AMPLC_DIO200_ISA)	+= amplc_dio200.o
 obj-$(CONFIG_COMEDI_AMPLC_PC263_ISA)	+= amplc_pc263.o
 obj-$(CONFIG_COMEDI_PCL711)		+= pcl711.o
 obj-$(CONFIG_COMEDI_PCL724)		+= pcl724.o
-obj-$(CONFIG_COMEDI_PCL725)		+= pcl725.o
 obj-$(CONFIG_COMEDI_PCL726)		+= pcl726.o
 obj-$(CONFIG_COMEDI_PCL730)		+= pcl730.o
 obj-$(CONFIG_COMEDI_PCL812)		+= pcl812.o
 obj-$(CONFIG_COMEDI_PCL816)		+= pcl816.o
 obj-$(CONFIG_COMEDI_PCL818)		+= pcl818.o
 obj-$(CONFIG_COMEDI_PCM3724)		+= pcm3724.o
-obj-$(CONFIG_COMEDI_PCM3730)		+= pcm3730.o
 obj-$(CONFIG_COMEDI_RTI800)		+= rti800.o
 obj-$(CONFIG_COMEDI_RTI802)		+= rti802.o
 obj-$(CONFIG_COMEDI_DAS16M1)		+= das16m1.o
@ -55,6 +52,7 @@ obj-$(CONFIG_COMEDI_PCMMIO)		+= pcmmio.o
 obj-$(CONFIG_COMEDI_PCMUIO)		+= pcmuio.o
 obj-$(CONFIG_COMEDI_MULTIQ3)		+= multiq3.o
 obj-$(CONFIG_COMEDI_POC)		+= poc.o
+obj-$(CONFIG_COMEDI_S526)		+= s526.o

 # Comedi PCI drivers
 obj-$(CONFIG_COMEDI_8255_PCI)		+= 8255_pci.o
@ -110,7 +108,6 @@ obj-$(CONFIG_COMEDI_NI_LABPC_PCI)	+= ni_labpc_pci.o
 obj-$(CONFIG_COMEDI_NI_PCIDIO)		+= ni_pcidio.o
 obj-$(CONFIG_COMEDI_NI_PCIMIO)		+= ni_pcimio.o
 obj-$(CONFIG_COMEDI_RTD520)		+= rtd520.o
-obj-$(CONFIG_COMEDI_S526)		+= s526.o
 obj-$(CONFIG_COMEDI_S626)		+= s626.o
 obj-$(CONFIG_COMEDI_SSV_DNP)		+= ssv_dnp.o

--- a/drivers/staging/comedi/drivers/acl7225b.c
+++ b/drivers/staging/comedi/drivers/acl7225b.c
@ -1,136 +0,0 @@
-/*
- * comedi/drivers/acl7225b.c
- * Driver for Adlink NuDAQ ACL-7225b and clones
- * José Luis Sánchez
- */
-/*
-Driver: acl7225b
-Description: Adlink NuDAQ ACL-7225b & compatibles
-Author: José Luis Sánchez (jsanchezv@teleline.es)
-Status: testing
-Devices: [Adlink] ACL-7225b (acl7225b), [ICP] P16R16DIO (p16r16dio)
-*/
-
-#include "../comedidev.h"
-
-#include <linux/ioport.h>
-
-#define ACL7225_RIO_LO 0	/* Relays input/output low byte (R0-R7) */
-#define ACL7225_RIO_HI 1	/* Relays input/output high byte (R8-R15) */
-#define ACL7225_DI_LO  2	/* Digital input low byte (DI0-DI7) */
-#define ACL7225_DI_HI  3	/* Digital input high byte (DI8-DI15) */
-
-struct acl7225b_boardinfo {
-	const char *name;
-	int io_range;
-};
-
-static const struct acl7225b_boardinfo acl7225b_boards[] = {
-	{
-		.name		= "acl7225b",
-		.io_range	= 8,		/* only 4 are used */
-	}, {
-		.name		= "p16r16dio",
-		.io_range	= 4,
-	},
-};
-
-static int acl7225b_do_insn_bits(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn,
-				 unsigned int *data)
-{
-	unsigned long reg = (unsigned long)s->private;
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
-		if (mask & 0x00ff)
-			outb(s->state & 0xff, dev->iobase + reg);
-		if (mask & 0xff00)
-			outb((s->state >> 8), dev->iobase + reg + 1);
-	}
-
-	data[1] = s->state;
-
-	return insn->n;
-}
-
-static int acl7225b_di_insn_bits(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn,
-				 unsigned int *data)
-{
-	unsigned long reg = (unsigned long)s->private;
-
-	data[1] = inb(dev->iobase + reg) |
-		  (inb(dev->iobase + reg + 1) << 8);
-
-	return insn->n;
-}
-
-static int acl7225b_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it)
-{
-	const struct acl7225b_boardinfo *board = comedi_board(dev);
-	struct comedi_subdevice *s;
-	int ret;
-
-	ret = comedi_request_region(dev, it->options[0], board->io_range);
-	if (ret)
-		return ret;
-
-	ret = comedi_alloc_subdevices(dev, 3);
-	if (ret)
-		return ret;
-
-	s = &dev->subdevices[0];
-	/* Relays outputs */
-	s->type		= COMEDI_SUBD_DO;
-	s->subdev_flags	= SDF_WRITABLE;
-	s->maxdata	= 1;
-	s->n_chan	= 16;
-	s->insn_bits	= acl7225b_do_insn_bits;
-	s->range_table	= &range_digital;
-	s->private	= (void *)ACL7225_RIO_LO;
-
-	s = &dev->subdevices[1];
-	/* Relays status */
-	s->type		= COMEDI_SUBD_DI;
-	s->subdev_flags	= SDF_READABLE;
-	s->maxdata	= 1;
-	s->n_chan	= 16;
-	s->insn_bits	= acl7225b_di_insn_bits;
-	s->range_table	= &range_digital;
-	s->private	= (void *)ACL7225_RIO_LO;
-
-	s = &dev->subdevices[2];
-	/* Isolated digital inputs */
-	s->type		= COMEDI_SUBD_DI;
-	s->subdev_flags	= SDF_READABLE;
-	s->maxdata	= 1;
-	s->n_chan	= 16;
-	s->insn_bits	= acl7225b_di_insn_bits;
-	s->range_table	= &range_digital;
-	s->private	= (void *)ACL7225_DI_LO;
-
-	return 0;
-}
-
-static struct comedi_driver acl7225b_driver = {
-	.driver_name	= "acl7225b",
-	.module		= THIS_MODULE,
-	.attach		= acl7225b_attach,
-	.detach		= comedi_legacy_detach,
-	.board_name	= &acl7225b_boards[0].name,
-	.num_names	= ARRAY_SIZE(acl7225b_boards),
-	.offset		= sizeof(struct acl7225b_boardinfo),
-};
-module_comedi_driver(acl7225b_driver);
-
-MODULE_DESCRIPTION("Comedi: NuDAQ ACL-7225B, 16 Relay & 16 Isolated DI Card");
-MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_LICENSE("GPL");
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@ -20,13 +20,6 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY
 WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this
-source code.
-
@endverbatim
 */
 /*
@ -46,10 +39,6 @@ source code.
  +-----------------------------------------------------------------------+
 */

-#ifndef COMEDI_SUBD_TTLIO
-#define COMEDI_SUBD_TTLIO   11	/* Digital Input Output But TTL */
-#endif
-
 static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev,
 				     struct comedi_subdevice *s,
 				     struct comedi_insn *insn,
@ -105,9 +94,6 @@ static int addi_auto_attach(struct comedi_device *dev,
 	if (ret)
 		return ret;

-	if (!this_board->pc_EepromChip ||
-	    strcmp(this_board->pc_EepromChip, ADDIDATA_9054)) {
-		/* board does not have an eeprom or is not ADDIDATA_9054 */
 	if (this_board->i_IorangeBase1)
 		dev->iobase = pci_resource_start(pcidev, 1);
 	else
@ -116,12 +102,6 @@ static int addi_auto_attach(struct comedi_device *dev,
 	devpriv->iobase = dev->iobase;
 	devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0);
 	devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
-	} else {
-		/* board has an ADDIDATA_9054 eeprom */
-		dev->iobase = pci_resource_start(pcidev, 2);
-		devpriv->iobase = pci_resource_start(pcidev, 2);
-		devpriv->dw_AiBase = pci_ioremap_bar(pcidev, 3);
-	}
 	devpriv->i_IobaseReserved = pci_resource_start(pcidev, 3);

 	/* Initialize parameters that can be overridden in EEPROM */
@ -132,7 +112,6 @@ static int addi_auto_attach(struct comedi_device *dev,
 	devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
 	devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
 	devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
-	devpriv->s_EeParameters.i_Dma = this_board->i_Dma;
 	devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
 	devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
 		this_board->ui_MinAcquisitiontimeNs;
@ -191,9 +170,6 @@ static int addi_auto_attach(struct comedi_device *dev,
 		s->len_chanlist = this_board->i_AiChannelList;
 		s->range_table = this_board->pr_AiRangelist;

-		/* Set the initialisation flag */
-		devpriv->b_AiInitialisation = 1;
-
 		s->insn_config = this_board->ai_config;
 		s->insn_read = this_board->ai_read;
 		s->insn_write = this_board->ai_write;
@ -215,8 +191,6 @@ static int addi_auto_attach(struct comedi_device *dev,
 		s->maxdata = devpriv->s_EeParameters.i_AoMaxdata;
 		s->len_chanlist =
 			devpriv->s_EeParameters.i_NbrAoChannel;
-		s->range_table = this_board->pr_AoRangelist;
-		s->insn_config = this_board->ao_config;
 		s->insn_write = this_board->ao_write;
 	} else {
 		s->type = COMEDI_SUBD_UNUSED;
@ -281,22 +255,7 @@ static int addi_auto_attach(struct comedi_device *dev,

 	/*  Allocate and Initialise TTL */
 	s = &dev->subdevices[5];
-	if (this_board->i_NbrTTLChannel) {
-		s->type = COMEDI_SUBD_TTLIO;
-		s->subdev_flags =
-			SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = this_board->i_NbrTTLChannel;
-		s->maxdata = 1;
-		s->io_bits = 0;	/* all bits input */
-		s->len_chanlist = this_board->i_NbrTTLChannel;
-		s->range_table = &range_digital;
-		s->insn_config = this_board->ttl_config;
-		s->insn_bits = this_board->ttl_bits;
-		s->insn_read = this_board->ttl_read;
-		s->insn_write = this_board->ttl_write;
-	} else {
 	s->type = COMEDI_SUBD_UNUSED;
-	}

 	/* EEPROM */
 	s = &dev->subdevices[6];
@ -323,8 +282,6 @@ static void i_ADDI_Detach(struct comedi_device *dev)
 			i_ADDI_Reset(dev);
 		if (dev->irq)
 			free_irq(dev->irq, dev);
-		if (devpriv->dw_AiBase)
-			iounmap(devpriv->dw_AiBase);
 	}
 	comedi_pci_disable(dev);
 }
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h
@ -18,12 +18,8 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>

-#define LOBYTE(W)	(unsigned char)((W) & 0xFF)
-#define HIBYTE(W)	(unsigned char)(((W) >> 8) & 0xFF)
-#define MAKEWORD(H, L)	(unsigned short)((L) | ((H) << 8))
 #define LOWORD(W)	(unsigned short)((W) & 0xFFFF)
 #define HIWORD(W)	(unsigned short)(((W) >> 16) & 0xFFFF)
-#define MAKEDWORD(H, L)	(unsigned int)((L) | ((H) << 16))

 #define ADDI_ENABLE		1
 #define ADDI_DISABLE		0
@ -33,8 +29,6 @@
 #define ADDIDATA_NO_EEPROM	0
 #define ADDIDATA_93C76		"93C76"
 #define ADDIDATA_S5920		"S5920"
-#define ADDIDATA_S5933		"S5933"
-#define ADDIDATA_9054		"9054"

 /* ADDIDATA Enable Disable */
 #define ADDIDATA_ENABLE		1
@ -55,17 +49,12 @@ struct addi_board {
 	int i_AiMaxdata;	/*  resolution of A/D */
 	int i_AoMaxdata;	/*  resolution of D/A */
 	const struct comedi_lrange *pr_AiRangelist;	/* rangelist for A/D */
-	const struct comedi_lrange *pr_AoRangelist;	/* rangelist for D/A */

 	int i_NbrDiChannel;	/*  Number of DI channels */
 	int i_NbrDoChannel;	/*  Number of DO channels */
 	int i_DoMaxdata;	/*  data to set all channels high */

-	int i_NbrTTLChannel;	/*  Number of TTL channels */
-
-	int i_Dma;		/*  dma present or not */
 	int i_Timer;		/*    timer subdevice present or not */
-	unsigned char b_AvailableConvertUnit;
 	unsigned int ui_MinAcquisitiontimeNs;	/*  Minimum Acquisition in Nano secs */
 	unsigned int ui_MinDelaytimeNs;	/*  Minimum Delay in Nano secs */

@ -90,12 +79,8 @@ struct addi_board {
 	int (*ai_cancel)(struct comedi_device *, struct comedi_subdevice *);

 	/* Analog Output */
-	int (*ao_config)(struct comedi_device *, struct comedi_subdevice *,
-			 struct comedi_insn *, unsigned int *);
 	int (*ao_write)(struct comedi_device *, struct comedi_subdevice *,
 			struct comedi_insn *, unsigned int *);
-	int (*ao_bits)(struct comedi_device *, struct comedi_subdevice *,
-		       struct comedi_insn *, unsigned int *);

 	/* Digital Input */
 	int (*di_config)(struct comedi_device *, struct comedi_subdevice *,
@ -126,16 +111,6 @@ struct addi_board {
 			  struct comedi_insn *, unsigned int *);
 	int (*timer_bits)(struct comedi_device *, struct comedi_subdevice *,
 			  struct comedi_insn *, unsigned int *);
-
-	/* TTL IO */
-	int (*ttl_config)(struct comedi_device *, struct comedi_subdevice *,
-			  struct comedi_insn *, unsigned int *);
-	int (*ttl_bits)(struct comedi_device *, struct comedi_subdevice *,
-			struct comedi_insn *, unsigned int *);
-	int (*ttl_read)(struct comedi_device *, struct comedi_subdevice *,
-			struct comedi_insn *, unsigned int *);
-	int (*ttl_write)(struct comedi_device *, struct comedi_subdevice *,
-			 struct comedi_insn *, unsigned int *);
 };

 /* MODULE INFO STRUCTURE */
@ -283,58 +258,41 @@ union str_ModuleInfo {

 /* Private structure for the addi_apci3120 driver */
 struct addi_private {
-
 	int iobase;
 	int i_IobaseAmcc;	/*  base+size for AMCC chip */
 	int i_IobaseAddon;	/* addon base address */
 	int i_IobaseReserved;
-	void __iomem *dw_AiBase;
 	unsigned char b_AiContinuous;	/*  we do unlimited AI */
-	unsigned char b_AiInitialisation;
 	unsigned int ui_AiActualScan;	/* how many scans we finished */
-	unsigned int ui_AiBufferPtr;	/*  data buffer ptr in samples */
 	unsigned int ui_AiNbrofChannels;	/*  how many channels is measured */
 	unsigned int ui_AiScanLength;	/*  Length of actual scanlist */
-	unsigned int ui_AiActualScanPosition;	/*  position in actual scan */
 	unsigned int *pui_AiChannelList;	/*  actual chanlist */
 	unsigned int ui_AiChannelList[32];	/*  actual chanlist */
-	unsigned char b_AiChannelConfiguration[32];	/*  actual chanlist */
 	unsigned int ui_AiReadData[32];
-	unsigned int dw_AiInitialised;
 	unsigned int ui_AiTimer0;	/* Timer Constant for Timer0 */
 	unsigned int ui_AiTimer1;	/* Timer constant for Timer1 */
 	unsigned int ui_AiFlags;
 	unsigned int ui_AiDataLength;
-	short *AiData;	/*  Pointer to sample data */
 	unsigned int ui_AiNbrofScans;	/*  number of scans to do */
 	unsigned short us_UseDma;	/*  To use Dma or not */
 	unsigned char b_DmaDoubleBuffer;	/*  we can use double buffering */
 	unsigned int ui_DmaActualBuffer;	/*  which buffer is used now */
-	/* UPDATE-0.7.57->0.7.68 */
-	/* unsigned int               ul_DmaBufferVirtual[2]; pointers to begin of DMA buffer */
 	short *ul_DmaBufferVirtual[2];	/*  pointers to begin of DMA buffer */
 	unsigned int ul_DmaBufferHw[2];	/*  hw address of DMA buff */
 	unsigned int ui_DmaBufferSize[2];	/*  size of dma buffer in bytes */
 	unsigned int ui_DmaBufferUsesize[2];	/*  which size we may now used for transfer */
-	unsigned int ui_DmaBufferSamples[2];	/*  size in samples */
 	unsigned int ui_DmaBufferPages[2];	/*  number of pages in buffer */
 	unsigned char b_DigitalOutputRegister;	/*  Digital Output Register */
 	unsigned char b_OutputMemoryStatus;
-	unsigned char b_AnalogInputChannelNbr;	/*  Analog input channel Nbr */
-	unsigned char b_AnalogOutputChannelNbr;	/*  Analog input Output  Nbr */
 	unsigned char b_TimerSelectMode;	/*  Contain data written at iobase + 0C */
 	unsigned char b_ModeSelectRegister;	/*  Contain data written at iobase + 0E */
 	unsigned short us_OutputRegister;	/*  Contain data written at iobase + 0 */
-	unsigned char b_InterruptState;
-	unsigned char b_TimerInit;	/*  Specify if InitTimerWatchdog was load */
-	unsigned char b_TimerStarted;	/*  Specify if timer 2 is running or not */
 	unsigned char b_Timer2Mode;	/*  Specify the timer 2 mode */
 	unsigned char b_Timer2Interrupt;	/* Timer2  interrupt enable or disable */
 	unsigned char b_AiCyclicAcquisition;	/*  indicate cyclic acquisition */
 	unsigned char b_InterruptMode;	/*  eoc eos or dma */
 	unsigned char b_EocEosInterrupt;	/*  Enable disable eoc eos interrupt */
 	unsigned int ui_EocEosConversionTime;
-	unsigned char b_EocEosConversionTimeBase;
 	unsigned char b_SingelDiff;
 	unsigned char b_ExttrigEnable;	/* To enable or disable external trigger */

@ -365,7 +323,6 @@ struct addi_private {
 	} s_InterruptParameters;

 	union str_ModuleInfo s_ModuleInfo[4];
-	unsigned int ul_TTLPortConfiguration[10];

 	/* Parameters read from EEPROM overriding static board info */
 	struct {
@ -376,7 +333,6 @@ struct addi_private {
 		int i_NbrDiChannel;	/*  Number of DI channels */
 		int i_NbrDoChannel;	/*  Number of DO channels */
 		int i_DoMaxdata;	/*  data to set all channels high */
-		int i_Dma;		/*  dma present or not */
 		int i_Timer;		/*  timer subdevice present or not */
 		unsigned int ui_MinAcquisitiontimeNs;
 					/*  Minimum Acquisition in Nano secs */
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@ -20,13 +20,6 @@
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * You should also find the complete GPL in the COPYING file accompanying
- * this source code.
 */

 #define NVRAM_USER_DATA_START	0x100
@ -302,7 +295,7 @@ static void addi_eeprom_read_ai_info(struct comedi_device *dev,
 	devpriv->s_EeParameters.ui_MinDelaytimeNs = tmp * 1000;

 	tmp = addi_eeprom_readw(iobase, type, addr + 20);
-	devpriv->s_EeParameters.i_Dma = (tmp >> 13) & 0x01;
+	/* dma = (tmp >> 13) & 0x01; */

 	tmp = addi_eeprom_readw(iobase, type, addr + 72) & 0xff;
 	if (tmp) {		/* > 0 */
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@ -15,10 +15,6 @@ This program is free software; you can redistribute it and/or modify it under th

 This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

-You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should also find the complete GPL in the COPYING file accompanying this source code.
-
@endverbatim
 */
 /*
--- a/Show More
+++ b/Show More