diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c index cc9f1927a322..70e67f6a22ff 100644 --- a/drivers/isdn/capi/capidrv.c +++ b/drivers/isdn/capi/capidrv.c @@ -763,6 +763,201 @@ static inline int new_bchan(capidrv_contr *card) } /* ------------------------------------------------------------------- */ +static char *capi_info2str(u16 reason) +{ +#ifndef CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON + return ".."; +#else + switch (reason) { + +/*-- informative values (corresponding message was processed) -----*/ + case 0x0001: + return "NCPI not supported by current protocol, NCPI ignored"; + case 0x0002: + return "Flags not supported by current protocol, flags ignored"; + case 0x0003: + return "Alert already sent by another application"; + +/*-- error information concerning CAPI_REGISTER -----*/ + case 0x1001: + return "Too many applications"; + case 0x1002: + return "Logical block size too small, must be at least 128 Bytes"; + case 0x1003: + return "Buffer exceeds 64 kByte"; + case 0x1004: + return "Message buffer size too small, must be at least 1024 Bytes"; + case 0x1005: + return "Max. number of logical connections not supported"; + case 0x1006: + return "Reserved"; + case 0x1007: + return "The message could not be accepted because of an internal busy condition"; + case 0x1008: + return "OS resource error (no memory ?)"; + case 0x1009: + return "CAPI not installed"; + case 0x100A: + return "Controller does not support external equipment"; + case 0x100B: + return "Controller does only support external equipment"; + +/*-- error information concerning message exchange functions -----*/ + case 0x1101: + return "Illegal application number"; + case 0x1102: + return "Illegal command or subcommand or message length less than 12 bytes"; + case 0x1103: + return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI"; + case 0x1104: + return "Queue is empty"; + case 0x1105: + return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE"; + case 0x1106: + return "Unknown notification parameter"; + case 0x1107: + return "The Message could not be accepted because of an internal busy condition"; + case 0x1108: + return "OS Resource error (no memory ?)"; + case 0x1109: + return "CAPI not installed"; + case 0x110A: + return "Controller does not support external equipment"; + case 0x110B: + return "Controller does only support external equipment"; + +/*-- error information concerning resource / coding problems -----*/ + case 0x2001: + return "Message not supported in current state"; + case 0x2002: + return "Illegal Controller / PLCI / NCCI"; + case 0x2003: + return "Out of PLCI"; + case 0x2004: + return "Out of NCCI"; + case 0x2005: + return "Out of LISTEN"; + case 0x2006: + return "Out of FAX resources (protocol T.30)"; + case 0x2007: + return "Illegal message parameter coding"; + +/*-- error information concerning requested services -----*/ + case 0x3001: + return "B1 protocol not supported"; + case 0x3002: + return "B2 protocol not supported"; + case 0x3003: + return "B3 protocol not supported"; + case 0x3004: + return "B1 protocol parameter not supported"; + case 0x3005: + return "B2 protocol parameter not supported"; + case 0x3006: + return "B3 protocol parameter not supported"; + case 0x3007: + return "B protocol combination not supported"; + case 0x3008: + return "NCPI not supported"; + case 0x3009: + return "CIP Value unknown"; + case 0x300A: + return "Flags not supported (reserved bits)"; + case 0x300B: + return "Facility not supported"; + case 0x300C: + return "Data length not supported by current protocol"; + case 0x300D: + return "Reset procedure not supported by current protocol"; + +/*-- informations about the clearing of a physical connection -----*/ + case 0x3301: + return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)"; + case 0x3302: + return "Protocol error layer 2"; + case 0x3303: + return "Protocol error layer 3"; + case 0x3304: + return "Another application got that call"; +/*-- T.30 specific reasons -----*/ + case 0x3311: + return "Connecting not successful (remote station is no FAX G3 machine)"; + case 0x3312: + return "Connecting not successful (training error)"; + case 0x3313: + return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)"; + case 0x3314: + return "Disconnected during transfer (remote abort)"; + case 0x3315: + return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)"; + case 0x3316: + return "Disconnected during transfer (local tx data underrun)"; + case 0x3317: + return "Disconnected during transfer (local rx data overflow)"; + case 0x3318: + return "Disconnected during transfer (local abort)"; + case 0x3319: + return "Illegal parameter coding (e.g. SFF coding error)"; + +/*-- disconnect causes from the network according to ETS 300 102-1/Q.931 -----*/ + case 0x3481: return "Unallocated (unassigned) number"; + case 0x3482: return "No route to specified transit network"; + case 0x3483: return "No route to destination"; + case 0x3486: return "Channel unacceptable"; + case 0x3487: + return "Call awarded and being delivered in an established channel"; + case 0x3490: return "Normal call clearing"; + case 0x3491: return "User busy"; + case 0x3492: return "No user responding"; + case 0x3493: return "No answer from user (user alerted)"; + case 0x3495: return "Call rejected"; + case 0x3496: return "Number changed"; + case 0x349A: return "Non-selected user clearing"; + case 0x349B: return "Destination out of order"; + case 0x349C: return "Invalid number format"; + case 0x349D: return "Facility rejected"; + case 0x349E: return "Response to STATUS ENQUIRY"; + case 0x349F: return "Normal, unspecified"; + case 0x34A2: return "No circuit / channel available"; + case 0x34A6: return "Network out of order"; + case 0x34A9: return "Temporary failure"; + case 0x34AA: return "Switching equipment congestion"; + case 0x34AB: return "Access information discarded"; + case 0x34AC: return "Requested circuit / channel not available"; + case 0x34AF: return "Resources unavailable, unspecified"; + case 0x34B1: return "Quality of service unavailable"; + case 0x34B2: return "Requested facility not subscribed"; + case 0x34B9: return "Bearer capability not authorized"; + case 0x34BA: return "Bearer capability not presently available"; + case 0x34BF: return "Service or option not available, unspecified"; + case 0x34C1: return "Bearer capability not implemented"; + case 0x34C2: return "Channel type not implemented"; + case 0x34C5: return "Requested facility not implemented"; + case 0x34C6: return "Only restricted digital information bearer capability is available"; + case 0x34CF: return "Service or option not implemented, unspecified"; + case 0x34D1: return "Invalid call reference value"; + case 0x34D2: return "Identified channel does not exist"; + case 0x34D3: return "A suspended call exists, but this call identity does not"; + case 0x34D4: return "Call identity in use"; + case 0x34D5: return "No call suspended"; + case 0x34D6: return "Call having the requested call identity has been cleared"; + case 0x34D8: return "Incompatible destination"; + case 0x34DB: return "Invalid transit network selection"; + case 0x34DF: return "Invalid message, unspecified"; + case 0x34E0: return "Mandatory information element is missing"; + case 0x34E1: return "Message type non-existent or not implemented"; + case 0x34E2: return "Message not compatible with call state or message type non-existent or not implemented"; + case 0x34E3: return "Information element non-existent or not implemented"; + case 0x34E4: return "Invalid information element contents"; + case 0x34E5: return "Message not compatible with call state"; + case 0x34E6: return "Recovery on timer expiry"; + case 0x34EF: return "Protocol error, unspecified"; + case 0x34FF: return "Interworking, unspecified"; + + default: return "No additional information"; + } +#endif +} static void handle_controller(_cmsg *cmsg) { diff --git a/drivers/isdn/capi/capiutil.c b/drivers/isdn/capi/capiutil.c index d26f17033b68..6e797e502cfa 100644 --- a/drivers/isdn/capi/capiutil.c +++ b/drivers/isdn/capi/capiutil.c @@ -22,205 +22,6 @@ /* from CAPI2.0 DDK AVM Berlin GmbH */ -#ifndef CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON -char *capi_info2str(u16 reason) -{ - return ".."; -} -#else -char *capi_info2str(u16 reason) -{ - switch (reason) { - -/*-- informative values (corresponding message was processed) -----*/ - case 0x0001: - return "NCPI not supported by current protocol, NCPI ignored"; - case 0x0002: - return "Flags not supported by current protocol, flags ignored"; - case 0x0003: - return "Alert already sent by another application"; - -/*-- error information concerning CAPI_REGISTER -----*/ - case 0x1001: - return "Too many applications"; - case 0x1002: - return "Logical block size too small, must be at least 128 Bytes"; - case 0x1003: - return "Buffer exceeds 64 kByte"; - case 0x1004: - return "Message buffer size too small, must be at least 1024 Bytes"; - case 0x1005: - return "Max. number of logical connections not supported"; - case 0x1006: - return "Reserved"; - case 0x1007: - return "The message could not be accepted because of an internal busy condition"; - case 0x1008: - return "OS resource error (no memory ?)"; - case 0x1009: - return "CAPI not installed"; - case 0x100A: - return "Controller does not support external equipment"; - case 0x100B: - return "Controller does only support external equipment"; - -/*-- error information concerning message exchange functions -----*/ - case 0x1101: - return "Illegal application number"; - case 0x1102: - return "Illegal command or subcommand or message length less than 12 bytes"; - case 0x1103: - return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI"; - case 0x1104: - return "Queue is empty"; - case 0x1105: - return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE"; - case 0x1106: - return "Unknown notification parameter"; - case 0x1107: - return "The Message could not be accepted because of an internal busy condition"; - case 0x1108: - return "OS Resource error (no memory ?)"; - case 0x1109: - return "CAPI not installed"; - case 0x110A: - return "Controller does not support external equipment"; - case 0x110B: - return "Controller does only support external equipment"; - -/*-- error information concerning resource / coding problems -----*/ - case 0x2001: - return "Message not supported in current state"; - case 0x2002: - return "Illegal Controller / PLCI / NCCI"; - case 0x2003: - return "Out of PLCI"; - case 0x2004: - return "Out of NCCI"; - case 0x2005: - return "Out of LISTEN"; - case 0x2006: - return "Out of FAX resources (protocol T.30)"; - case 0x2007: - return "Illegal message parameter coding"; - -/*-- error information concerning requested services -----*/ - case 0x3001: - return "B1 protocol not supported"; - case 0x3002: - return "B2 protocol not supported"; - case 0x3003: - return "B3 protocol not supported"; - case 0x3004: - return "B1 protocol parameter not supported"; - case 0x3005: - return "B2 protocol parameter not supported"; - case 0x3006: - return "B3 protocol parameter not supported"; - case 0x3007: - return "B protocol combination not supported"; - case 0x3008: - return "NCPI not supported"; - case 0x3009: - return "CIP Value unknown"; - case 0x300A: - return "Flags not supported (reserved bits)"; - case 0x300B: - return "Facility not supported"; - case 0x300C: - return "Data length not supported by current protocol"; - case 0x300D: - return "Reset procedure not supported by current protocol"; - -/*-- informations about the clearing of a physical connection -----*/ - case 0x3301: - return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)"; - case 0x3302: - return "Protocol error layer 2"; - case 0x3303: - return "Protocol error layer 3"; - case 0x3304: - return "Another application got that call"; -/*-- T.30 specific reasons -----*/ - case 0x3311: - return "Connecting not successful (remote station is no FAX G3 machine)"; - case 0x3312: - return "Connecting not successful (training error)"; - case 0x3313: - return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)"; - case 0x3314: - return "Disconnected during transfer (remote abort)"; - case 0x3315: - return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)"; - case 0x3316: - return "Disconnected during transfer (local tx data underrun)"; - case 0x3317: - return "Disconnected during transfer (local rx data overflow)"; - case 0x3318: - return "Disconnected during transfer (local abort)"; - case 0x3319: - return "Illegal parameter coding (e.g. SFF coding error)"; - -/*-- disconnect causes from the network according to ETS 300 102-1/Q.931 -----*/ - case 0x3481: return "Unallocated (unassigned) number"; - case 0x3482: return "No route to specified transit network"; - case 0x3483: return "No route to destination"; - case 0x3486: return "Channel unacceptable"; - case 0x3487: - return "Call awarded and being delivered in an established channel"; - case 0x3490: return "Normal call clearing"; - case 0x3491: return "User busy"; - case 0x3492: return "No user responding"; - case 0x3493: return "No answer from user (user alerted)"; - case 0x3495: return "Call rejected"; - case 0x3496: return "Number changed"; - case 0x349A: return "Non-selected user clearing"; - case 0x349B: return "Destination out of order"; - case 0x349C: return "Invalid number format"; - case 0x349D: return "Facility rejected"; - case 0x349E: return "Response to STATUS ENQUIRY"; - case 0x349F: return "Normal, unspecified"; - case 0x34A2: return "No circuit / channel available"; - case 0x34A6: return "Network out of order"; - case 0x34A9: return "Temporary failure"; - case 0x34AA: return "Switching equipment congestion"; - case 0x34AB: return "Access information discarded"; - case 0x34AC: return "Requested circuit / channel not available"; - case 0x34AF: return "Resources unavailable, unspecified"; - case 0x34B1: return "Quality of service unavailable"; - case 0x34B2: return "Requested facility not subscribed"; - case 0x34B9: return "Bearer capability not authorized"; - case 0x34BA: return "Bearer capability not presently available"; - case 0x34BF: return "Service or option not available, unspecified"; - case 0x34C1: return "Bearer capability not implemented"; - case 0x34C2: return "Channel type not implemented"; - case 0x34C5: return "Requested facility not implemented"; - case 0x34C6: return "Only restricted digital information bearer capability is available"; - case 0x34CF: return "Service or option not implemented, unspecified"; - case 0x34D1: return "Invalid call reference value"; - case 0x34D2: return "Identified channel does not exist"; - case 0x34D3: return "A suspended call exists, but this call identity does not"; - case 0x34D4: return "Call identity in use"; - case 0x34D5: return "No call suspended"; - case 0x34D6: return "Call having the requested call identity has been cleared"; - case 0x34D8: return "Incompatible destination"; - case 0x34DB: return "Invalid transit network selection"; - case 0x34DF: return "Invalid message, unspecified"; - case 0x34E0: return "Mandatory information element is missing"; - case 0x34E1: return "Message type non-existent or not implemented"; - case 0x34E2: return "Message not compatible with call state or message type non-existent or not implemented"; - case 0x34E3: return "Information element non-existent or not implemented"; - case 0x34E4: return "Invalid information element contents"; - case 0x34E5: return "Message not compatible with call state"; - case 0x34E6: return "Recovery on timer expiry"; - case 0x34EF: return "Protocol error, unspecified"; - case 0x34FF: return "Interworking, unspecified"; - - default: return "No additional information"; - } -} -#endif - typedef struct { int typ; size_t off; @@ -1073,4 +874,3 @@ EXPORT_SYMBOL(capi_cmsg_header); EXPORT_SYMBOL(capi_cmd2str); EXPORT_SYMBOL(capi_cmsg2str); EXPORT_SYMBOL(capi_message2str); -EXPORT_SYMBOL(capi_info2str); diff --git a/include/linux/isdn/capiutil.h b/include/linux/isdn/capiutil.h index 5a52f2c94f3f..44bd6046e6e2 100644 --- a/include/linux/isdn/capiutil.h +++ b/include/linux/isdn/capiutil.h @@ -164,11 +164,6 @@ unsigned capi_cmsg_header(_cmsg * cmsg, __u16 _ApplId, __u8 _Command, __u8 _Subcommand, __u16 _Messagenumber, __u32 _Controller); -/* - * capi_info2str generated a readable string for Capi2.0 reasons. - */ -char *capi_info2str(__u16 reason); - /*-----------------------------------------------------------------------*/ /*