amiflop: fold headers into C file

amifd.h and amifdreg.h are only used from amiflop.c, and they're pretty
small, so move the contents to amiflop.c and get rid of the .h files.
This is preparation for adding a struct blk_mq_tag_set to struct
amiga_floppy_struct.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit is contained in:
Omar Sandoval 2018-10-11 12:20:45 -07:00 committed by Jens Axboe
parent 8ccb8cb189
commit c87228f16f
3 changed files with 120 additions and 148 deletions

View File

@ -61,10 +61,8 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/amifdreg.h>
#include <linux/amifd.h>
#include <linux/fs.h>
#include <linux/blkdev.h>
#include <linux/blk-mq.h>
#include <linux/elevator.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
@ -86,6 +84,125 @@
* Defines
*/
/*
* CIAAPRA bits (read only)
*/
#define DSKRDY (0x1<<5) /* disk ready when low */
#define DSKTRACK0 (0x1<<4) /* head at track zero when low */
#define DSKPROT (0x1<<3) /* disk protected when low */
#define DSKCHANGE (0x1<<2) /* low when disk removed */
/*
* CIAAPRB bits (read/write)
*/
#define DSKMOTOR (0x1<<7) /* motor on when low */
#define DSKSEL3 (0x1<<6) /* select drive 3 when low */
#define DSKSEL2 (0x1<<5) /* select drive 2 when low */
#define DSKSEL1 (0x1<<4) /* select drive 1 when low */
#define DSKSEL0 (0x1<<3) /* select drive 0 when low */
#define DSKSIDE (0x1<<2) /* side selection: 0 = upper, 1 = lower */
#define DSKDIREC (0x1<<1) /* step direction: 0=in, 1=out (to trk 0) */
#define DSKSTEP (0x1) /* pulse low to step head 1 track */
/*
* DSKBYTR bits (read only)
*/
#define DSKBYT (1<<15) /* register contains valid byte when set */
#define DMAON (1<<14) /* disk DMA enabled */
#define DISKWRITE (1<<13) /* disk write bit in DSKLEN enabled */
#define WORDEQUAL (1<<12) /* DSKSYNC register match when true */
/* bits 7-0 are data */
/*
* ADKCON/ADKCONR bits
*/
#ifndef SETCLR
#define ADK_SETCLR (1<<15) /* control bit */
#endif
#define ADK_PRECOMP1 (1<<14) /* precompensation selection */
#define ADK_PRECOMP0 (1<<13) /* 00=none, 01=140ns, 10=280ns, 11=500ns */
#define ADK_MFMPREC (1<<12) /* 0=GCR precomp., 1=MFM precomp. */
#define ADK_WORDSYNC (1<<10) /* enable DSKSYNC auto DMA */
#define ADK_MSBSYNC (1<<9) /* when 1, enable sync on MSbit (for GCR) */
#define ADK_FAST (1<<8) /* bit cell: 0=2us (GCR), 1=1us (MFM) */
/*
* DSKLEN bits
*/
#define DSKLEN_DMAEN (1<<15)
#define DSKLEN_WRITE (1<<14)
/*
* INTENA/INTREQ bits
*/
#define DSKINDEX (0x1<<4) /* DSKINDEX bit */
/*
* Misc
*/
#define MFM_SYNC 0x4489 /* standard MFM sync value */
/* Values for FD_COMMAND */
#define FD_RECALIBRATE 0x07 /* move to track 0 */
#define FD_SEEK 0x0F /* seek track */
#define FD_READ 0xE6 /* read with MT, MFM, SKip deleted */
#define FD_WRITE 0xC5 /* write with MT, MFM */
#define FD_SENSEI 0x08 /* Sense Interrupt Status */
#define FD_SPECIFY 0x03 /* specify HUT etc */
#define FD_FORMAT 0x4D /* format one track */
#define FD_VERSION 0x10 /* get version code */
#define FD_CONFIGURE 0x13 /* configure FIFO operation */
#define FD_PERPENDICULAR 0x12 /* perpendicular r/w mode */
#define FD_MAX_UNITS 4 /* Max. Number of drives */
#define FLOPPY_MAX_SECTORS 22 /* Max. Number of sectors per track */
struct fd_data_type {
char *name; /* description of data type */
int sects; /* sectors per track */
int (*read_fkt)(int); /* read whole track */
void (*write_fkt)(int); /* write whole track */
};
struct fd_drive_type {
unsigned long code; /* code returned from drive */
char *name; /* description of drive */
unsigned int tracks; /* number of tracks */
unsigned int heads; /* number of heads */
unsigned int read_size; /* raw read size for one track */
unsigned int write_size; /* raw write size for one track */
unsigned int sect_mult; /* sectors and gap multiplier (HD = 2) */
unsigned int precomp1; /* start track for precomp 1 */
unsigned int precomp2; /* start track for precomp 2 */
unsigned int step_delay; /* time (in ms) for delay after step */
unsigned int settle_time; /* time to settle after dir change */
unsigned int side_time; /* time needed to change sides */
};
struct amiga_floppy_struct {
struct fd_drive_type *type; /* type of floppy for this unit */
struct fd_data_type *dtype; /* type of floppy for this unit */
int track; /* current track (-1 == unknown) */
unsigned char *trackbuf; /* current track (kmaloc()'d */
int blocks; /* total # blocks on disk */
int changed; /* true when not known */
int disk; /* disk in drive (-1 == unknown) */
int motor; /* true when motor is at speed */
int busy; /* true when drive is active */
int dirty; /* true when trackbuf is not on disk */
int status; /* current error code for unit */
struct gendisk *gendisk;
};
/*
* Error codes
*/

View File

@ -1,63 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _AMIFD_H
#define _AMIFD_H
/* Definitions for the Amiga floppy driver */
#include <linux/fd.h>
#define FD_MAX_UNITS 4 /* Max. Number of drives */
#define FLOPPY_MAX_SECTORS 22 /* Max. Number of sectors per track */
#ifndef ASSEMBLER
struct fd_data_type {
char *name; /* description of data type */
int sects; /* sectors per track */
#ifdef __STDC__
int (*read_fkt)(int);
void (*write_fkt)(int);
#else
int (*read_fkt)(); /* read whole track */
void (*write_fkt)(); /* write whole track */
#endif
};
/*
** Floppy type descriptions
*/
struct fd_drive_type {
unsigned long code; /* code returned from drive */
char *name; /* description of drive */
unsigned int tracks; /* number of tracks */
unsigned int heads; /* number of heads */
unsigned int read_size; /* raw read size for one track */
unsigned int write_size; /* raw write size for one track */
unsigned int sect_mult; /* sectors and gap multiplier (HD = 2) */
unsigned int precomp1; /* start track for precomp 1 */
unsigned int precomp2; /* start track for precomp 2 */
unsigned int step_delay; /* time (in ms) for delay after step */
unsigned int settle_time; /* time to settle after dir change */
unsigned int side_time; /* time needed to change sides */
};
struct amiga_floppy_struct {
struct fd_drive_type *type; /* type of floppy for this unit */
struct fd_data_type *dtype; /* type of floppy for this unit */
int track; /* current track (-1 == unknown) */
unsigned char *trackbuf; /* current track (kmaloc()'d */
int blocks; /* total # blocks on disk */
int changed; /* true when not known */
int disk; /* disk in drive (-1 == unknown) */
int motor; /* true when motor is at speed */
int busy; /* true when drive is active */
int dirty; /* true when trackbuf is not on disk */
int status; /* current error code for unit */
struct gendisk *gendisk;
};
#endif
#endif

View File

@ -1,82 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_AMIFDREG_H
#define _LINUX_AMIFDREG_H
/*
** CIAAPRA bits (read only)
*/
#define DSKRDY (0x1<<5) /* disk ready when low */
#define DSKTRACK0 (0x1<<4) /* head at track zero when low */
#define DSKPROT (0x1<<3) /* disk protected when low */
#define DSKCHANGE (0x1<<2) /* low when disk removed */
/*
** CIAAPRB bits (read/write)
*/
#define DSKMOTOR (0x1<<7) /* motor on when low */
#define DSKSEL3 (0x1<<6) /* select drive 3 when low */
#define DSKSEL2 (0x1<<5) /* select drive 2 when low */
#define DSKSEL1 (0x1<<4) /* select drive 1 when low */
#define DSKSEL0 (0x1<<3) /* select drive 0 when low */
#define DSKSIDE (0x1<<2) /* side selection: 0 = upper, 1 = lower */
#define DSKDIREC (0x1<<1) /* step direction: 0=in, 1=out (to trk 0) */
#define DSKSTEP (0x1) /* pulse low to step head 1 track */
/*
** DSKBYTR bits (read only)
*/
#define DSKBYT (1<<15) /* register contains valid byte when set */
#define DMAON (1<<14) /* disk DMA enabled */
#define DISKWRITE (1<<13) /* disk write bit in DSKLEN enabled */
#define WORDEQUAL (1<<12) /* DSKSYNC register match when true */
/* bits 7-0 are data */
/*
** ADKCON/ADKCONR bits
*/
#ifndef SETCLR
#define ADK_SETCLR (1<<15) /* control bit */
#endif
#define ADK_PRECOMP1 (1<<14) /* precompensation selection */
#define ADK_PRECOMP0 (1<<13) /* 00=none, 01=140ns, 10=280ns, 11=500ns */
#define ADK_MFMPREC (1<<12) /* 0=GCR precomp., 1=MFM precomp. */
#define ADK_WORDSYNC (1<<10) /* enable DSKSYNC auto DMA */
#define ADK_MSBSYNC (1<<9) /* when 1, enable sync on MSbit (for GCR) */
#define ADK_FAST (1<<8) /* bit cell: 0=2us (GCR), 1=1us (MFM) */
/*
** DSKLEN bits
*/
#define DSKLEN_DMAEN (1<<15)
#define DSKLEN_WRITE (1<<14)
/*
** INTENA/INTREQ bits
*/
#define DSKINDEX (0x1<<4) /* DSKINDEX bit */
/*
** Misc
*/
#define MFM_SYNC 0x4489 /* standard MFM sync value */
/* Values for FD_COMMAND */
#define FD_RECALIBRATE 0x07 /* move to track 0 */
#define FD_SEEK 0x0F /* seek track */
#define FD_READ 0xE6 /* read with MT, MFM, SKip deleted */
#define FD_WRITE 0xC5 /* write with MT, MFM */
#define FD_SENSEI 0x08 /* Sense Interrupt Status */
#define FD_SPECIFY 0x03 /* specify HUT etc */
#define FD_FORMAT 0x4D /* format one track */
#define FD_VERSION 0x10 /* get version code */
#define FD_CONFIGURE 0x13 /* configure FIFO operation */
#define FD_PERPENDICULAR 0x12 /* perpendicular r/w mode */
#endif /* _LINUX_AMIFDREG_H */