USB driver fixes for 5.19-rc4

Here are some small USB driver fixes and new device ids for 5.19-rc4 for
 a few small reported issues.  They include:
 	- new usb-serial driver ids
 	- MAINTAINERS file update to properly catch the USB dts files
 	- dt-bindings fixes for reported build warnings
 	- xhci driver fixes for reported problems
 	- typec Kconfig dependancy fix
 	- raw_gadget fuzzing fixes found by syzbot
 	- chipidea driver bugfix
 	- usb gadget uvc bugfix
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYrcd/Q8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yncSACgltyfiCy+kOL5NWis+JxE0Itn+/EAnRlfkm41
 +NMH4Tz2FNgGR6FN4988
 =hu3T
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for 5.19-rc4
  for a few small reported issues. They include:

   - new usb-serial driver ids

   - MAINTAINERS file update to properly catch the USB dts files

   - dt-bindings fixes for reported build warnings

   - xhci driver fixes for reported problems

   - typec Kconfig dependancy fix

   - raw_gadget fuzzing fixes found by syzbot

   - chipidea driver bugfix

   - usb gadget uvc bugfix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: chipidea: udc: check request status before setting device address
  USB: gadget: Fix double-free bug in raw_gadget driver
  xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
  xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
  xhci: turn off port power in shutdown
  xhci: Keep interrupt disabled in initialization until host is running.
  USB: serial: option: add Quectel RM500K module support
  USB: serial: option: add Quectel EM05-G modem
  USB: serial: pl2303: add support for more HXN (G) types
  usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
  usb: gadget: uvc: fix list double add in uvcg_video_pump
  dt-bindings: usb: ehci: Increase the number of PHYs
  dt-bindings: usb: ohci: Increase the number of PHYs
  usb: gadget: Fix non-unique driver names in raw-gadget driver
  MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM
  USB: serial: option: add Telit LE910Cx 0x1250 composition

Documentation/devicetree/bindings/usb/generic-ehci.yaml

@@ -136,7 +136,8 @@ properties:
       Phandle of a companion.
 
   phys:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb

Documentation/devicetree/bindings/usb/generic-ohci.yaml

@@ -103,7 +103,8 @@ properties:
       Overrides the detected port count
 
   phys:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb

MAINTAINERS

@@ -20749,6 +20749,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
 F:	Documentation/devicetree/bindings/usb/
 F:	Documentation/usb/
 F:	drivers/usb/
+F:	include/dt-bindings/usb/
 F:	include/linux/usb.h
 F:	include/linux/usb/
 

drivers/usb/chipidea/udc.c

@@ -1048,6 +1048,9 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
 	struct ci_hdrc *ci = req->context;
 	unsigned long flags;
 
+	if (req->status < 0)
+		return;
+
 	if (ci->setaddr) {
 		hw_usb_set_address(ci, ci->address);
 		ci->setaddr = false;

drivers/usb/gadget/function/uvc_video.c

@@ -424,6 +424,9 @@ static void uvcg_video_pump(struct work_struct *work)
 			uvcg_queue_cancel(queue, 0);
 			break;
 		}
+
+		/* Endpoint now owns the request */
+		req = NULL;
 		video->req_int_count++;
 	}
 

drivers/usb/gadget/legacy/raw_gadget.c

@@ -11,6 +11,7 @@
 #include <linux/ctype.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
+#include <linux/idr.h>
 #include <linux/kref.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
@@ -36,6 +37,9 @@ MODULE_LICENSE("GPL");
 
 /*----------------------------------------------------------------------*/
 
+static DEFINE_IDA(driver_id_numbers);
+#define DRIVER_DRIVER_NAME_LENGTH_MAX	32
+
 #define RAW_EVENT_QUEUE_SIZE	16
 
 struct raw_event_queue {
@@ -161,6 +165,9 @@ struct raw_dev {
 	/* Reference to misc device: */
 	struct device			*dev;
 
+	/* Make driver names unique */
+	int				driver_id_number;
+
 	/* Protected by lock: */
 	enum dev_state			state;
 	bool				gadget_registered;
@@ -189,6 +196,7 @@ static struct raw_dev *dev_new(void)
 	spin_lock_init(&dev->lock);
 	init_completion(&dev->ep0_done);
 	raw_event_queue_init(&dev->queue);
+	dev->driver_id_number = -1;
 	return dev;
 }
 
@@ -199,6 +207,9 @@ static void dev_free(struct kref *kref)
 
 	kfree(dev->udc_name);
 	kfree(dev->driver.udc_name);
+	kfree(dev->driver.driver.name);
+	if (dev->driver_id_number >= 0)
+		ida_free(&driver_id_numbers, dev->driver_id_number);
 	if (dev->req) {
 		if (dev->ep0_urb_queued)
 			usb_ep_dequeue(dev->gadget->ep0, dev->req);
@@ -419,9 +430,11 @@ out_put:
 static int raw_ioctl_init(struct raw_dev *dev, unsigned long value)
 {
 	int ret = 0;
+	int driver_id_number;
 	struct usb_raw_init arg;
 	char *udc_driver_name;
 	char *udc_device_name;
+	char *driver_driver_name;
 	unsigned long flags;
 
 	if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
@@ -440,36 +453,43 @@ static int raw_ioctl_init(struct raw_dev *dev, unsigned long value)
 		return -EINVAL;
 	}
 
+	driver_id_number = ida_alloc(&driver_id_numbers, GFP_KERNEL);
+	if (driver_id_number < 0)
+		return driver_id_number;
+
+	driver_driver_name = kmalloc(DRIVER_DRIVER_NAME_LENGTH_MAX, GFP_KERNEL);
+	if (!driver_driver_name) {
+		ret = -ENOMEM;
+		goto out_free_driver_id_number;
+	}
+	snprintf(driver_driver_name, DRIVER_DRIVER_NAME_LENGTH_MAX,
+				DRIVER_NAME ".%d", driver_id_number);
+
 	udc_driver_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
-	if (!udc_driver_name)
-		return -ENOMEM;
+	if (!udc_driver_name) {
+		ret = -ENOMEM;
+		goto out_free_driver_driver_name;
+	}
 	ret = strscpy(udc_driver_name, &arg.driver_name[0],
 				UDC_NAME_LENGTH_MAX);
-	if (ret < 0) {
-		kfree(udc_driver_name);
-		return ret;
-	}
+	if (ret < 0)
+		goto out_free_udc_driver_name;
 	ret = 0;
 
 	udc_device_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
 	if (!udc_device_name) {
-		kfree(udc_driver_name);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_free_udc_driver_name;
 	}
 	ret = strscpy(udc_device_name, &arg.device_name[0],
 				UDC_NAME_LENGTH_MAX);
-	if (ret < 0) {
-		kfree(udc_driver_name);
-		kfree(udc_device_name);
-		return ret;
-	}
+	if (ret < 0)
+		goto out_free_udc_device_name;
 	ret = 0;
 
 	spin_lock_irqsave(&dev->lock, flags);
 	if (dev->state != STATE_DEV_OPENED) {
 		dev_dbg(dev->dev, "fail, device is not opened\n");
-		kfree(udc_driver_name);
-		kfree(udc_device_name);
 		ret = -EINVAL;
 		goto out_unlock;
 	}
@@ -484,14 +504,25 @@ static int raw_ioctl_init(struct raw_dev *dev, unsigned long value)
 	dev->driver.suspend = gadget_suspend;
 	dev->driver.resume = gadget_resume;
 	dev->driver.reset = gadget_reset;
-	dev->driver.driver.name = DRIVER_NAME;
+	dev->driver.driver.name = driver_driver_name;
 	dev->driver.udc_name = udc_device_name;
 	dev->driver.match_existing_only = 1;
+	dev->driver_id_number = driver_id_number;
 
 	dev->state = STATE_DEV_INITIALIZED;
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
 
 out_unlock:
 	spin_unlock_irqrestore(&dev->lock, flags);
+out_free_udc_device_name:
+	kfree(udc_device_name);
+out_free_udc_driver_name:
+	kfree(udc_driver_name);
+out_free_driver_driver_name:
+	kfree(driver_driver_name);
+out_free_driver_id_number:
+	ida_free(&driver_id_numbers, driver_id_number);
 	return ret;
 }
 

drivers/usb/host/xhci-hub.c

@@ -652,7 +652,7 @@ struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd)
  * It will release and re-aquire the lock while calling ACPI
  * method.
  */
-static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
+void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
 				u16 index, bool on, unsigned long *flags)
 	__must_hold(&xhci->lock)
 {

drivers/usb/host/xhci-pci.c

@@ -61,6 +61,8 @@
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI		0x461e
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI		0x464e
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI	0x51ed
+#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI		0xa71e
+#define PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI		0x7ec0
 
 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI			0x1639
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
@@ -269,7 +271,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI))
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI))
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&

drivers/usb/host/xhci.c

@@ -611,15 +611,37 @@ static int xhci_init(struct usb_hcd *hcd)
 
 static int xhci_run_finished(struct xhci_hcd *xhci)
 {
+	unsigned long	flags;
+	u32		temp;
+
+	/*
+	 * Enable interrupts before starting the host (xhci 4.2 and 5.5.2).
+	 * Protect the short window before host is running with a lock
+	 */
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable interrupts");
+	temp = readl(&xhci->op_regs->command);
+	temp |= (CMD_EIE);
+	writel(temp, &xhci->op_regs->command);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable primary interrupter");
+	temp = readl(&xhci->ir_set->irq_pending);
+	writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending);
+
 	if (xhci_start(xhci)) {
 		xhci_halt(xhci);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return -ENODEV;
 	}
+
 	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
 
 	if (xhci->quirks & XHCI_NEC_HOST)
 		xhci_ring_cmd_db(xhci);
 
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
 	return 0;
 }
 
@@ -668,19 +690,6 @@ int xhci_run(struct usb_hcd *hcd)
 	temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
 	writel(temp, &xhci->ir_set->irq_control);
 
-	/* Set the HCD state before we enable the irqs */
-	temp = readl(&xhci->op_regs->command);
-	temp |= (CMD_EIE);
-	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-			"// Enable interrupts, cmd = 0x%x.", temp);
-	writel(temp, &xhci->op_regs->command);
-
-	temp = readl(&xhci->ir_set->irq_pending);
-	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-			"// Enabling event ring interrupter %p by writing 0x%x to irq_pending",
-			xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
-	writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending);
-
 	if (xhci->quirks & XHCI_NEC_HOST) {
 		struct xhci_command *command;
 
@@ -782,6 +791,8 @@ static void xhci_stop(struct usb_hcd *hcd)
 void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	unsigned long flags;
+	int i;
 
 	if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
 		usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
@@ -797,12 +808,21 @@ void xhci_shutdown(struct usb_hcd *hcd)
 		del_timer_sync(&xhci->shared_hcd->rh_timer);
 	}
 
-	spin_lock_irq(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 	xhci_halt(xhci);
+
+	/* Power off USB2 ports*/
+	for (i = 0; i < xhci->usb2_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, xhci->main_hcd, i, false, &flags);
+
+	/* Power off USB3 ports*/
+	for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, xhci->shared_hcd, i, false, &flags);
+
 	/* Workaround for spurious wakeups at shutdown with HSW */
 	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
 		xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
-	spin_unlock_irq(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	xhci_cleanup_msix(xhci);
 

drivers/usb/host/xhci.h

@@ -2196,6 +2196,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
 int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
 struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
+void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index,
+			 bool on, unsigned long *flags);
 
 void xhci_hc_died(struct xhci_hcd *xhci);
 

drivers/usb/serial/option.c

@@ -252,10 +252,12 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_EG95			0x0195
 #define QUECTEL_PRODUCT_BG96			0x0296
 #define QUECTEL_PRODUCT_EP06			0x0306
+#define QUECTEL_PRODUCT_EM05G			0x030a
 #define QUECTEL_PRODUCT_EM12			0x0512
 #define QUECTEL_PRODUCT_RM500Q			0x0800
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
 #define QUECTEL_PRODUCT_EC200T			0x6026
+#define QUECTEL_PRODUCT_RM500K			0x7001
 
 #define CMOTECH_VENDOR_ID			0x16d8
 #define CMOTECH_PRODUCT_6001			0x6001
@@ -1134,6 +1136,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
@@ -1147,6 +1151,7 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
 
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
@@ -1279,6 +1284,7 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1231, 0xff),	/* Telit LE910Cx (RNDIS) */
 	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x1250, 0xff, 0x00, 0x00) },	/* Telit LE910Cx (rmnet) */
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1260),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1261),

drivers/usb/serial/pl2303.c

@@ -436,22 +436,27 @@ static int pl2303_detect_type(struct usb_serial *serial)
 		break;
 	case 0x200:
 		switch (bcdDevice) {
-		case 0x100:
+		case 0x100:	/* GC */
 		case 0x105:
+			return TYPE_HXN;
+		case 0x300:	/* GT / TA */
+			if (pl2303_supports_hx_status(serial))
+				return TYPE_TA;
+			fallthrough;
 		case 0x305:
+		case 0x400:	/* GL */
 		case 0x405:
+			return TYPE_HXN;
+		case 0x500:	/* GE / TB */
+			if (pl2303_supports_hx_status(serial))
+				return TYPE_TB;
+			fallthrough;
+		case 0x505:
+		case 0x600:	/* GS */
 		case 0x605:
-			/*
-			 * Assume it's an HXN-type if the device doesn't
-			 * support the old read request value.
-			 */
-			if (!pl2303_supports_hx_status(serial))
-				return TYPE_HXN;
-			break;
-		case 0x300:
-			return TYPE_TA;
-		case 0x500:
-			return TYPE_TB;
+		case 0x700:	/* GR */
+		case 0x705:
+			return TYPE_HXN;
 		}
 		break;
 	}

drivers/usb/typec/tcpm/Kconfig

@@ -56,7 +56,6 @@ config TYPEC_WCOVE
 	tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
 	depends on ACPI
 	depends on MFD_INTEL_PMC_BXT
-	depends on INTEL_SOC_PMIC
 	depends on BXT_WC_PMIC_OPREGION
 	help
 	  This driver adds support for USB Type-C on Intel Broxton platforms