diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
index 804b6e6be929..3afc5e87cfdd 100644
--- a/arch/x86/include/asm/dwarf2.h
+++ b/arch/x86/include/asm/dwarf2.h
@@ -6,56 +6,91 @@
 #endif
 
 /*
-   Macros for dwarf2 CFI unwind table entries.
-   See "as.info" for details on these pseudo ops. Unfortunately
-   they are only supported in very new binutils, so define them
-   away for older version.
+ * Macros for dwarf2 CFI unwind table entries.
+ * See "as.info" for details on these pseudo ops. Unfortunately
+ * they are only supported in very new binutils, so define them
+ * away for older version.
  */
 
 #ifdef CONFIG_AS_CFI
 
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
-#define CFI_OFFSET .cfi_offset
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_REGISTER .cfi_register
-#define CFI_RESTORE .cfi_restore
-#define CFI_REMEMBER_STATE .cfi_remember_state
-#define CFI_RESTORE_STATE .cfi_restore_state
-#define CFI_UNDEFINED .cfi_undefined
+#define CFI_STARTPROC		.cfi_startproc
+#define CFI_ENDPROC		.cfi_endproc
+#define CFI_DEF_CFA		.cfi_def_cfa
+#define CFI_DEF_CFA_REGISTER	.cfi_def_cfa_register
+#define CFI_DEF_CFA_OFFSET	.cfi_def_cfa_offset
+#define CFI_ADJUST_CFA_OFFSET	.cfi_adjust_cfa_offset
+#define CFI_OFFSET		.cfi_offset
+#define CFI_REL_OFFSET		.cfi_rel_offset
+#define CFI_REGISTER		.cfi_register
+#define CFI_RESTORE		.cfi_restore
+#define CFI_REMEMBER_STATE	.cfi_remember_state
+#define CFI_RESTORE_STATE	.cfi_restore_state
+#define CFI_UNDEFINED		.cfi_undefined
 
 #ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME .cfi_signal_frame
+#define CFI_SIGNAL_FRAME	.cfi_signal_frame
 #else
 #define CFI_SIGNAL_FRAME
 #endif
 
 #else
 
-/* Due to the structure of pre-exisiting code, don't use assembler line
-   comment character # to ignore the arguments. Instead, use a dummy macro. */
+/*
+ * Due to the structure of pre-exisiting code, don't use assembler line
+ * comment character # to ignore the arguments. Instead, use a dummy macro.
+ */
 .macro cfi_ignore a=0, b=0, c=0, d=0
 .endm
 
-#define CFI_STARTPROC	cfi_ignore
-#define CFI_ENDPROC	cfi_ignore
-#define CFI_DEF_CFA	cfi_ignore
+#define CFI_STARTPROC		cfi_ignore
+#define CFI_ENDPROC		cfi_ignore
+#define CFI_DEF_CFA		cfi_ignore
 #define CFI_DEF_CFA_REGISTER	cfi_ignore
 #define CFI_DEF_CFA_OFFSET	cfi_ignore
 #define CFI_ADJUST_CFA_OFFSET	cfi_ignore
-#define CFI_OFFSET	cfi_ignore
-#define CFI_REL_OFFSET	cfi_ignore
-#define CFI_REGISTER	cfi_ignore
-#define CFI_RESTORE	cfi_ignore
-#define CFI_REMEMBER_STATE cfi_ignore
-#define CFI_RESTORE_STATE cfi_ignore
-#define CFI_UNDEFINED cfi_ignore
-#define CFI_SIGNAL_FRAME cfi_ignore
+#define CFI_OFFSET		cfi_ignore
+#define CFI_REL_OFFSET		cfi_ignore
+#define CFI_REGISTER		cfi_ignore
+#define CFI_RESTORE		cfi_ignore
+#define CFI_REMEMBER_STATE	cfi_ignore
+#define CFI_RESTORE_STATE	cfi_ignore
+#define CFI_UNDEFINED		cfi_ignore
+#define CFI_SIGNAL_FRAME	cfi_ignore
 
 #endif
 
+/*
+ * An attempt to make CFI annotations more or less
+ * correct and shorter. It is implied that you know
+ * what you're doing if you use them.
+ */
+#ifdef __ASSEMBLY__
+#ifdef CONFIG_X86_64
+	.macro pushq_cfi reg
+	pushq \reg
+	CFI_ADJUST_CFA_OFFSET 8
+	.endm
+
+	.macro popq_cfi reg
+	popq \reg
+	CFI_ADJUST_CFA_OFFSET -8
+	.endm
+
+	.macro movq_cfi reg offset=0
+	movq %\reg, \offset(%rsp)
+	CFI_REL_OFFSET \reg, \offset
+	.endm
+
+	.macro movq_cfi_restore offset reg
+	movq \offset(%rsp), %\reg
+	CFI_RESTORE \reg
+	.endm
+#else /*!CONFIG_X86_64*/
+
+	/* 32bit defenitions are missed yet */
+
+#endif /*!CONFIG_X86_64*/
+#endif /*__ASSEMBLY__*/
+
 #endif /* _ASM_X86_DWARF2_H */
diff --git a/arch/x86/include/asm/hardirq_32.h b/arch/x86/include/asm/hardirq_32.h
index 5ca135e72f2b..cf7954d1405f 100644
--- a/arch/x86/include/asm/hardirq_32.h
+++ b/arch/x86/include/asm/hardirq_32.h
@@ -22,6 +22,8 @@ DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
 #define __ARCH_IRQ_STAT
 #define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
 
+#define inc_irq_stat(member)	(__get_cpu_var(irq_stat).member++)
+
 void ack_bad_irq(unsigned int irq);
 #include <linux/irq_cpustat.h>
 
diff --git a/arch/x86/include/asm/hardirq_64.h b/arch/x86/include/asm/hardirq_64.h
index 1ba381fc51d3..b5a6b5d56704 100644
--- a/arch/x86/include/asm/hardirq_64.h
+++ b/arch/x86/include/asm/hardirq_64.h
@@ -11,6 +11,8 @@
 
 #define __ARCH_IRQ_STAT 1
 
+#define inc_irq_stat(member)	add_pda(member, 1)
+
 #define local_softirq_pending() read_pda(__softirq_pending)
 
 #define __ARCH_SET_SOFTIRQ_PENDING 1
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index b97aecb0b61d..8de644b6b959 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -109,9 +109,7 @@ extern asmlinkage void smp_invalidate_interrupt(struct pt_regs *);
 #endif
 #endif
 
-#ifdef CONFIG_X86_32
-extern void (*const interrupt[NR_VECTORS])(void);
-#endif
+extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void);
 
 typedef int vector_irq_t[NR_VECTORS];
 DECLARE_PER_CPU(vector_irq_t, vector_irq);
diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
index f61ee8f937e4..5d98d0b68ffc 100644
--- a/arch/x86/include/asm/linkage.h
+++ b/arch/x86/include/asm/linkage.h
@@ -57,5 +57,65 @@
 #define __ALIGN_STR ".align 16,0x90"
 #endif
 
+/*
+ * to check ENTRY_X86/END_X86 and
+ * KPROBE_ENTRY_X86/KPROBE_END_X86
+ * unbalanced-missed-mixed appearance
+ */
+#define __set_entry_x86		.set ENTRY_X86_IN, 0
+#define __unset_entry_x86	.set ENTRY_X86_IN, 1
+#define __set_kprobe_x86	.set KPROBE_X86_IN, 0
+#define __unset_kprobe_x86	.set KPROBE_X86_IN, 1
+
+#define __macro_err_x86 .error "ENTRY_X86/KPROBE_X86 unbalanced,missed,mixed"
+
+#define __check_entry_x86	\
+	.ifdef ENTRY_X86_IN;	\
+	.ifeq ENTRY_X86_IN;	\
+	__macro_err_x86;	\
+	.abort;			\
+	.endif;			\
+	.endif
+
+#define __check_kprobe_x86	\
+	.ifdef KPROBE_X86_IN;	\
+	.ifeq KPROBE_X86_IN;	\
+	__macro_err_x86;	\
+	.abort;			\
+	.endif;			\
+	.endif
+
+#define __check_entry_kprobe_x86	\
+	__check_entry_x86;		\
+	__check_kprobe_x86
+
+#define ENTRY_KPROBE_FINAL_X86 __check_entry_kprobe_x86
+
+#define ENTRY_X86(name)			\
+	__check_entry_kprobe_x86;	\
+	__set_entry_x86;		\
+	.globl name;			\
+	__ALIGN;			\
+	name:
+
+#define END_X86(name)			\
+	__unset_entry_x86;		\
+	__check_entry_kprobe_x86;	\
+	.size name, .-name
+
+#define KPROBE_ENTRY_X86(name)		\
+	__check_entry_kprobe_x86;	\
+	__set_kprobe_x86;		\
+	.pushsection .kprobes.text, "ax"; \
+	.globl name;			\
+	__ALIGN;			\
+	name:
+
+#define KPROBE_END_X86(name)		\
+	__unset_kprobe_x86;		\
+	__check_entry_kprobe_x86;	\
+	.size name, .-name;		\
+	.popsection
+
 #endif /* _ASM_X86_LINKAGE_H */
 
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 20c6e12c0475..7397911f8478 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -777,11 +777,7 @@ static void local_apic_timer_interrupt(void)
 	/*
 	 * the NMI deadlock-detector uses this.
 	 */
-#ifdef CONFIG_X86_64
-	add_pda(apic_timer_irqs, 1);
-#else
-	per_cpu(irq_stat, cpu).apic_timer_irqs++;
-#endif
+	inc_irq_stat(apic_timer_irqs);
 
 	evt->event_handler(evt);
 }
@@ -1677,14 +1673,11 @@ void smp_spurious_interrupt(struct pt_regs *regs)
 	if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
 		ack_APIC_irq();
 
-#ifdef CONFIG_X86_64
-	add_pda(irq_spurious_count, 1);
-#else
+	inc_irq_stat(irq_spurious_count);
+
 	/* see sw-dev-man vol 3, chapter 7.4.13.5 */
 	pr_info("spurious APIC interrupt on CPU#%d, "
 		"should never happen.\n", smp_processor_id());
-	__get_cpu_var(irq_stat).irq_spurious_count++;
-#endif
 	irq_exit();
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 5eb390a4b2e9..748c8f9e7a05 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -237,7 +237,7 @@ asmlinkage void mce_threshold_interrupt(void)
 		}
 	}
 out:
-	add_pda(irq_threshold_count, 1);
+	inc_irq_stat(irq_threshold_count);
 	irq_exit();
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index c17eaf5dd6dd..4b48f251fd39 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -26,7 +26,7 @@ asmlinkage void smp_thermal_interrupt(void)
 	if (therm_throt_process(msr_val & 1))
 		mce_log_therm_throt_event(smp_processor_id(), msr_val);
 
-	add_pda(irq_thermal_count, 1);
+	inc_irq_stat(irq_thermal_count);
 	irq_exit();
 }
 
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index f6402c4ba10d..fe7014176eb0 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -619,28 +619,37 @@ END(syscall_badsys)
 27:;
 
 /*
- * Build the entry stubs and pointer table with
- * some assembler magic.
+ * Build the entry stubs and pointer table with some assembler magic.
+ * We pack 7 stubs into a single 32-byte chunk, which will fit in a
+ * single cache line on all modern x86 implementations.
  */
-.section .rodata,"a"
+.section .init.rodata,"a"
 ENTRY(interrupt)
 .text
-
+	.p2align 5
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
 ENTRY(irq_entries_start)
 	RING0_INT_FRAME
-vector=0
-.rept NR_VECTORS
-	ALIGN
- .if vector
+vector=FIRST_EXTERNAL_VECTOR
+.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7
+	.balign 32
+  .rept	7
+    .if vector < NR_VECTORS
+      .if vector <> FIRST_EXTERNAL_VECTOR
 	CFI_ADJUST_CFA_OFFSET -4
- .endif
-1:	pushl $~(vector)
+      .endif
+1:	pushl $(~vector+0x80)	/* Note: always in signed byte range */
 	CFI_ADJUST_CFA_OFFSET 4
-	jmp common_interrupt
- .previous
+      .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
+	jmp 2f
+      .endif
+      .previous
 	.long 1b
- .text
+      .text
 vector=vector+1
+    .endif
+  .endr
+2:	jmp common_interrupt
 .endr
 END(irq_entries_start)
 
@@ -652,8 +661,9 @@ END(interrupt)
  * the CPU automatically disables interrupts when executing an IRQ vector,
  * so IRQ-flags tracing has to follow that:
  */
-	ALIGN
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
+	addl $-0x80,(%esp)	/* Adjust vector into the [-256,-1] range */
 	SAVE_ALL
 	TRACE_IRQS_OFF
 	movl %esp,%eax
@@ -678,65 +688,6 @@ ENDPROC(name)
 /* The include is where all of the SMP etc. interrupts come from */
 #include "entry_arch.h"
 
-KPROBE_ENTRY(page_fault)
-	RING0_EC_FRAME
-	pushl $do_page_fault
-	CFI_ADJUST_CFA_OFFSET 4
-	ALIGN
-error_code:
-	/* the function address is in %fs's slot on the stack */
-	pushl %es
-	CFI_ADJUST_CFA_OFFSET 4
-	/*CFI_REL_OFFSET es, 0*/
-	pushl %ds
-	CFI_ADJUST_CFA_OFFSET 4
-	/*CFI_REL_OFFSET ds, 0*/
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET eax, 0
-	pushl %ebp
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ebp, 0
-	pushl %edi
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET edi, 0
-	pushl %esi
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET esi, 0
-	pushl %edx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET edx, 0
-	pushl %ecx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ecx, 0
-	pushl %ebx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ebx, 0
-	cld
-	pushl %fs
-	CFI_ADJUST_CFA_OFFSET 4
-	/*CFI_REL_OFFSET fs, 0*/
-	movl $(__KERNEL_PERCPU), %ecx
-	movl %ecx, %fs
-	UNWIND_ESPFIX_STACK
-	popl %ecx
-	CFI_ADJUST_CFA_OFFSET -4
-	/*CFI_REGISTER es, ecx*/
-	movl PT_FS(%esp), %edi		# get the function address
-	movl PT_ORIG_EAX(%esp), %edx	# get the error code
-	movl $-1, PT_ORIG_EAX(%esp)	# no syscall to restart
-	mov  %ecx, PT_FS(%esp)
-	/*CFI_REL_OFFSET fs, ES*/
-	movl $(__USER_DS), %ecx
-	movl %ecx, %ds
-	movl %ecx, %es
-	TRACE_IRQS_OFF
-	movl %esp,%eax			# pt_regs pointer
-	call *%edi
-	jmp ret_from_exception
-	CFI_ENDPROC
-KPROBE_END(page_fault)
-
 ENTRY(coprocessor_error)
 	RING0_INT_FRAME
 	pushl $0
@@ -767,140 +718,6 @@ ENTRY(device_not_available)
 	CFI_ENDPROC
 END(device_not_available)
 
-/*
- * Debug traps and NMI can happen at the one SYSENTER instruction
- * that sets up the real kernel stack. Check here, since we can't
- * allow the wrong stack to be used.
- *
- * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
- * already pushed 3 words if it hits on the sysenter instruction:
- * eflags, cs and eip.
- *
- * We just load the right stack, and push the three (known) values
- * by hand onto the new stack - while updating the return eip past
- * the instruction that would have done it for sysenter.
- */
-#define FIX_STACK(offset, ok, label)		\
-	cmpw $__KERNEL_CS,4(%esp);		\
-	jne ok;					\
-label:						\
-	movl TSS_sysenter_sp0+offset(%esp),%esp;	\
-	CFI_DEF_CFA esp, 0;			\
-	CFI_UNDEFINED eip;			\
-	pushfl;					\
-	CFI_ADJUST_CFA_OFFSET 4;		\
-	pushl $__KERNEL_CS;			\
-	CFI_ADJUST_CFA_OFFSET 4;		\
-	pushl $sysenter_past_esp;		\
-	CFI_ADJUST_CFA_OFFSET 4;		\
-	CFI_REL_OFFSET eip, 0
-
-KPROBE_ENTRY(debug)
-	RING0_INT_FRAME
-	cmpl $ia32_sysenter_target,(%esp)
-	jne debug_stack_correct
-	FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
-debug_stack_correct:
-	pushl $-1			# mark this as an int
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx			# error code 0
-	movl %esp,%eax			# pt_regs pointer
-	call do_debug
-	jmp ret_from_exception
-	CFI_ENDPROC
-KPROBE_END(debug)
-
-/*
- * NMI is doubly nasty. It can happen _while_ we're handling
- * a debug fault, and the debug fault hasn't yet been able to
- * clear up the stack. So we first check whether we got  an
- * NMI on the sysenter entry path, but after that we need to
- * check whether we got an NMI on the debug path where the debug
- * fault happened on the sysenter path.
- */
-KPROBE_ENTRY(nmi)
-	RING0_INT_FRAME
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	movl %ss, %eax
-	cmpw $__ESPFIX_SS, %ax
-	popl %eax
-	CFI_ADJUST_CFA_OFFSET -4
-	je nmi_espfix_stack
-	cmpl $ia32_sysenter_target,(%esp)
-	je nmi_stack_fixup
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	movl %esp,%eax
-	/* Do not access memory above the end of our stack page,
-	 * it might not exist.
-	 */
-	andl $(THREAD_SIZE-1),%eax
-	cmpl $(THREAD_SIZE-20),%eax
-	popl %eax
-	CFI_ADJUST_CFA_OFFSET -4
-	jae nmi_stack_correct
-	cmpl $ia32_sysenter_target,12(%esp)
-	je nmi_debug_stack_check
-nmi_stack_correct:
-	/* We have a RING0_INT_FRAME here */
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_nmi
-	jmp restore_nocheck_notrace
-	CFI_ENDPROC
-
-nmi_stack_fixup:
-	RING0_INT_FRAME
-	FIX_STACK(12,nmi_stack_correct, 1)
-	jmp nmi_stack_correct
-
-nmi_debug_stack_check:
-	/* We have a RING0_INT_FRAME here */
-	cmpw $__KERNEL_CS,16(%esp)
-	jne nmi_stack_correct
-	cmpl $debug,(%esp)
-	jb nmi_stack_correct
-	cmpl $debug_esp_fix_insn,(%esp)
-	ja nmi_stack_correct
-	FIX_STACK(24,nmi_stack_correct, 1)
-	jmp nmi_stack_correct
-
-nmi_espfix_stack:
-	/* We have a RING0_INT_FRAME here.
-	 *
-	 * create the pointer to lss back
-	 */
-	pushl %ss
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl %esp
-	CFI_ADJUST_CFA_OFFSET 4
-	addw $4, (%esp)
-	/* copy the iret frame of 12 bytes */
-	.rept 3
-	pushl 16(%esp)
-	CFI_ADJUST_CFA_OFFSET 4
-	.endr
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	FIXUP_ESPFIX_STACK		# %eax == %esp
-	xorl %edx,%edx			# zero error code
-	call do_nmi
-	RESTORE_REGS
-	lss 12+4(%esp), %esp		# back to espfix stack
-	CFI_ADJUST_CFA_OFFSET -24
-	jmp irq_return
-	CFI_ENDPROC
-KPROBE_END(nmi)
-
 #ifdef CONFIG_PARAVIRT
 ENTRY(native_iret)
 	iret
@@ -916,19 +733,6 @@ ENTRY(native_irq_enable_sysexit)
 END(native_irq_enable_sysexit)
 #endif
 
-KPROBE_ENTRY(int3)
-	RING0_INT_FRAME
-	pushl $-1			# mark this as an int
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_int3
-	jmp ret_from_exception
-	CFI_ENDPROC
-KPROBE_END(int3)
-
 ENTRY(overflow)
 	RING0_INT_FRAME
 	pushl $0
@@ -993,14 +797,6 @@ ENTRY(stack_segment)
 	CFI_ENDPROC
 END(stack_segment)
 
-KPROBE_ENTRY(general_protection)
-	RING0_EC_FRAME
-	pushl $do_general_protection
-	CFI_ADJUST_CFA_OFFSET 4
-	jmp error_code
-	CFI_ENDPROC
-KPROBE_END(general_protection)
-
 ENTRY(alignment_check)
 	RING0_EC_FRAME
 	pushl $do_alignment_check
@@ -1211,3 +1007,227 @@ END(mcount)
 #include "syscall_table_32.S"
 
 syscall_table_size=(.-sys_call_table)
+
+/*
+ * Some functions should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
+
+ENTRY(page_fault)
+	RING0_EC_FRAME
+	pushl $do_page_fault
+	CFI_ADJUST_CFA_OFFSET 4
+	ALIGN
+error_code:
+	/* the function address is in %fs's slot on the stack */
+	pushl %es
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET es, 0*/
+	pushl %ds
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET ds, 0*/
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET eax, 0
+	pushl %ebp
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebp, 0
+	pushl %edi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edi, 0
+	pushl %esi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET esi, 0
+	pushl %edx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edx, 0
+	pushl %ecx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ecx, 0
+	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebx, 0
+	cld
+	pushl %fs
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET fs, 0*/
+	movl $(__KERNEL_PERCPU), %ecx
+	movl %ecx, %fs
+	UNWIND_ESPFIX_STACK
+	popl %ecx
+	CFI_ADJUST_CFA_OFFSET -4
+	/*CFI_REGISTER es, ecx*/
+	movl PT_FS(%esp), %edi		# get the function address
+	movl PT_ORIG_EAX(%esp), %edx	# get the error code
+	movl $-1, PT_ORIG_EAX(%esp)	# no syscall to restart
+	mov  %ecx, PT_FS(%esp)
+	/*CFI_REL_OFFSET fs, ES*/
+	movl $(__USER_DS), %ecx
+	movl %ecx, %ds
+	movl %ecx, %es
+	TRACE_IRQS_OFF
+	movl %esp,%eax			# pt_regs pointer
+	call *%edi
+	jmp ret_from_exception
+	CFI_ENDPROC
+END(page_fault)
+
+/*
+ * Debug traps and NMI can happen at the one SYSENTER instruction
+ * that sets up the real kernel stack. Check here, since we can't
+ * allow the wrong stack to be used.
+ *
+ * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
+ * already pushed 3 words if it hits on the sysenter instruction:
+ * eflags, cs and eip.
+ *
+ * We just load the right stack, and push the three (known) values
+ * by hand onto the new stack - while updating the return eip past
+ * the instruction that would have done it for sysenter.
+ */
+#define FIX_STACK(offset, ok, label)		\
+	cmpw $__KERNEL_CS,4(%esp);		\
+	jne ok;					\
+label:						\
+	movl TSS_sysenter_sp0+offset(%esp),%esp;	\
+	CFI_DEF_CFA esp, 0;			\
+	CFI_UNDEFINED eip;			\
+	pushfl;					\
+	CFI_ADJUST_CFA_OFFSET 4;		\
+	pushl $__KERNEL_CS;			\
+	CFI_ADJUST_CFA_OFFSET 4;		\
+	pushl $sysenter_past_esp;		\
+	CFI_ADJUST_CFA_OFFSET 4;		\
+	CFI_REL_OFFSET eip, 0
+
+ENTRY(debug)
+	RING0_INT_FRAME
+	cmpl $ia32_sysenter_target,(%esp)
+	jne debug_stack_correct
+	FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
+debug_stack_correct:
+	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	xorl %edx,%edx			# error code 0
+	movl %esp,%eax			# pt_regs pointer
+	call do_debug
+	jmp ret_from_exception
+	CFI_ENDPROC
+END(debug)
+
+/*
+ * NMI is doubly nasty. It can happen _while_ we're handling
+ * a debug fault, and the debug fault hasn't yet been able to
+ * clear up the stack. So we first check whether we got  an
+ * NMI on the sysenter entry path, but after that we need to
+ * check whether we got an NMI on the debug path where the debug
+ * fault happened on the sysenter path.
+ */
+ENTRY(nmi)
+	RING0_INT_FRAME
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	movl %ss, %eax
+	cmpw $__ESPFIX_SS, %ax
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	je nmi_espfix_stack
+	cmpl $ia32_sysenter_target,(%esp)
+	je nmi_stack_fixup
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	movl %esp,%eax
+	/* Do not access memory above the end of our stack page,
+	 * it might not exist.
+	 */
+	andl $(THREAD_SIZE-1),%eax
+	cmpl $(THREAD_SIZE-20),%eax
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	jae nmi_stack_correct
+	cmpl $ia32_sysenter_target,12(%esp)
+	je nmi_debug_stack_check
+nmi_stack_correct:
+	/* We have a RING0_INT_FRAME here */
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	xorl %edx,%edx		# zero error code
+	movl %esp,%eax		# pt_regs pointer
+	call do_nmi
+	jmp restore_nocheck_notrace
+	CFI_ENDPROC
+
+nmi_stack_fixup:
+	RING0_INT_FRAME
+	FIX_STACK(12,nmi_stack_correct, 1)
+	jmp nmi_stack_correct
+
+nmi_debug_stack_check:
+	/* We have a RING0_INT_FRAME here */
+	cmpw $__KERNEL_CS,16(%esp)
+	jne nmi_stack_correct
+	cmpl $debug,(%esp)
+	jb nmi_stack_correct
+	cmpl $debug_esp_fix_insn,(%esp)
+	ja nmi_stack_correct
+	FIX_STACK(24,nmi_stack_correct, 1)
+	jmp nmi_stack_correct
+
+nmi_espfix_stack:
+	/* We have a RING0_INT_FRAME here.
+	 *
+	 * create the pointer to lss back
+	 */
+	pushl %ss
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl %esp
+	CFI_ADJUST_CFA_OFFSET 4
+	addw $4, (%esp)
+	/* copy the iret frame of 12 bytes */
+	.rept 3
+	pushl 16(%esp)
+	CFI_ADJUST_CFA_OFFSET 4
+	.endr
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	FIXUP_ESPFIX_STACK		# %eax == %esp
+	xorl %edx,%edx			# zero error code
+	call do_nmi
+	RESTORE_REGS
+	lss 12+4(%esp), %esp		# back to espfix stack
+	CFI_ADJUST_CFA_OFFSET -24
+	jmp irq_return
+	CFI_ENDPROC
+END(nmi)
+
+ENTRY(int3)
+	RING0_INT_FRAME
+	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	xorl %edx,%edx		# zero error code
+	movl %esp,%eax		# pt_regs pointer
+	call do_int3
+	jmp ret_from_exception
+	CFI_ENDPROC
+END(int3)
+
+ENTRY(general_protection)
+	RING0_EC_FRAME
+	pushl $do_general_protection
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(general_protection)
+
+/*
+ * End of kprobes section
+ */
+	.popsection
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 42571baaca32..3194636a4293 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -60,7 +60,6 @@
 #define __AUDIT_ARCH_LE	   0x40000000
 
 	.code64
-
 #ifdef CONFIG_FUNCTION_TRACER
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(mcount)
@@ -169,21 +168,21 @@ ENTRY(native_usergs_sysret64)
  */
 
 	/* %rsp:at FRAMEEND */
-	.macro FIXUP_TOP_OF_STACK tmp
-	movq	%gs:pda_oldrsp,\tmp
-	movq  	\tmp,RSP(%rsp)
-	movq    $__USER_DS,SS(%rsp)
-	movq    $__USER_CS,CS(%rsp)
-	movq 	$-1,RCX(%rsp)
-	movq	R11(%rsp),\tmp  /* get eflags */
-	movq	\tmp,EFLAGS(%rsp)
+	.macro FIXUP_TOP_OF_STACK tmp offset=0
+	movq %gs:pda_oldrsp,\tmp
+	movq \tmp,RSP+\offset(%rsp)
+	movq $__USER_DS,SS+\offset(%rsp)
+	movq $__USER_CS,CS+\offset(%rsp)
+	movq $-1,RCX+\offset(%rsp)
+	movq R11+\offset(%rsp),\tmp  /* get eflags */
+	movq \tmp,EFLAGS+\offset(%rsp)
 	.endm
 
-	.macro RESTORE_TOP_OF_STACK tmp,offset=0
-	movq   RSP-\offset(%rsp),\tmp
-	movq   \tmp,%gs:pda_oldrsp
-	movq   EFLAGS-\offset(%rsp),\tmp
-	movq   \tmp,R11-\offset(%rsp)
+	.macro RESTORE_TOP_OF_STACK tmp offset=0
+	movq RSP+\offset(%rsp),\tmp
+	movq \tmp,%gs:pda_oldrsp
+	movq EFLAGS+\offset(%rsp),\tmp
+	movq \tmp,R11+\offset(%rsp)
 	.endm
 
 	.macro FAKE_STACK_FRAME child_rip
@@ -195,7 +194,7 @@ ENTRY(native_usergs_sysret64)
 	pushq %rax /* rsp */
 	CFI_ADJUST_CFA_OFFSET	8
 	CFI_REL_OFFSET	rsp,0
-	pushq $(1<<9) /* eflags - interrupts on */
+	pushq $X86_EFLAGS_IF /* eflags - interrupts on */
 	CFI_ADJUST_CFA_OFFSET	8
 	/*CFI_REL_OFFSET	rflags,0*/
 	pushq $__KERNEL_CS /* cs */
@@ -213,64 +212,184 @@ ENTRY(native_usergs_sysret64)
 	CFI_ADJUST_CFA_OFFSET	-(6*8)
 	.endm
 
-	.macro	CFI_DEFAULT_STACK start=1
-	.if \start
-	CFI_STARTPROC	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,SS+8
-	.else
-	CFI_DEF_CFA_OFFSET SS+8
-	.endif
-	CFI_REL_OFFSET	r15,R15
-	CFI_REL_OFFSET	r14,R14
-	CFI_REL_OFFSET	r13,R13
-	CFI_REL_OFFSET	r12,R12
-	CFI_REL_OFFSET	rbp,RBP
-	CFI_REL_OFFSET	rbx,RBX
-	CFI_REL_OFFSET	r11,R11
-	CFI_REL_OFFSET	r10,R10
-	CFI_REL_OFFSET	r9,R9
-	CFI_REL_OFFSET	r8,R8
-	CFI_REL_OFFSET	rax,RAX
-	CFI_REL_OFFSET	rcx,RCX
-	CFI_REL_OFFSET	rdx,RDX
-	CFI_REL_OFFSET	rsi,RSI
-	CFI_REL_OFFSET	rdi,RDI
-	CFI_REL_OFFSET	rip,RIP
-	/*CFI_REL_OFFSET	cs,CS*/
-	/*CFI_REL_OFFSET	rflags,EFLAGS*/
-	CFI_REL_OFFSET	rsp,RSP
-	/*CFI_REL_OFFSET	ss,SS*/
-	.endm
 /*
- * A newly forked process directly context switches into this.
+ * initial frame state for interrupts (and exceptions without error code)
+ */
+	.macro EMPTY_FRAME start=1 offset=0
+	.if \start
+	CFI_STARTPROC simple
+	CFI_SIGNAL_FRAME
+	CFI_DEF_CFA rsp,8+\offset
+	.else
+	CFI_DEF_CFA_OFFSET 8+\offset
+	.endif
+	.endm
+
+/*
+ * initial frame state for interrupts (and exceptions without error code)
+ */
+	.macro INTR_FRAME start=1 offset=0
+	EMPTY_FRAME \start, SS+8+\offset-RIP
+	/*CFI_REL_OFFSET ss, SS+\offset-RIP*/
+	CFI_REL_OFFSET rsp, RSP+\offset-RIP
+	/*CFI_REL_OFFSET rflags, EFLAGS+\offset-RIP*/
+	/*CFI_REL_OFFSET cs, CS+\offset-RIP*/
+	CFI_REL_OFFSET rip, RIP+\offset-RIP
+	.endm
+
+/*
+ * initial frame state for exceptions with error code (and interrupts
+ * with vector already pushed)
+ */
+	.macro XCPT_FRAME start=1 offset=0
+	INTR_FRAME \start, RIP+\offset-ORIG_RAX
+	/*CFI_REL_OFFSET orig_rax, ORIG_RAX-ORIG_RAX*/
+	.endm
+
+/*
+ * frame that enables calling into C.
+ */
+	.macro PARTIAL_FRAME start=1 offset=0
+	XCPT_FRAME \start, ORIG_RAX+\offset-ARGOFFSET
+	CFI_REL_OFFSET rdi, RDI+\offset-ARGOFFSET
+	CFI_REL_OFFSET rsi, RSI+\offset-ARGOFFSET
+	CFI_REL_OFFSET rdx, RDX+\offset-ARGOFFSET
+	CFI_REL_OFFSET rcx, RCX+\offset-ARGOFFSET
+	CFI_REL_OFFSET rax, RAX+\offset-ARGOFFSET
+	CFI_REL_OFFSET r8, R8+\offset-ARGOFFSET
+	CFI_REL_OFFSET r9, R9+\offset-ARGOFFSET
+	CFI_REL_OFFSET r10, R10+\offset-ARGOFFSET
+	CFI_REL_OFFSET r11, R11+\offset-ARGOFFSET
+	.endm
+
+/*
+ * frame that enables passing a complete pt_regs to a C function.
+ */
+	.macro DEFAULT_FRAME start=1 offset=0
+	PARTIAL_FRAME \start, R11+\offset-R15
+	CFI_REL_OFFSET rbx, RBX+\offset
+	CFI_REL_OFFSET rbp, RBP+\offset
+	CFI_REL_OFFSET r12, R12+\offset
+	CFI_REL_OFFSET r13, R13+\offset
+	CFI_REL_OFFSET r14, R14+\offset
+	CFI_REL_OFFSET r15, R15+\offset
+	.endm
+
+/* save partial stack frame */
+ENTRY(save_args)
+	XCPT_FRAME
+	cld
+	movq_cfi rdi, RDI+16-ARGOFFSET
+	movq_cfi rsi, RSI+16-ARGOFFSET
+	movq_cfi rdx, RDX+16-ARGOFFSET
+	movq_cfi rcx, RCX+16-ARGOFFSET
+	movq_cfi rax, RAX+16-ARGOFFSET
+	movq_cfi  r8,  R8+16-ARGOFFSET
+	movq_cfi  r9,  R9+16-ARGOFFSET
+	movq_cfi r10, R10+16-ARGOFFSET
+	movq_cfi r11, R11+16-ARGOFFSET
+
+	leaq -ARGOFFSET+16(%rsp),%rdi	/* arg1 for handler */
+	movq_cfi rbp, 8		/* push %rbp */
+	leaq 8(%rsp), %rbp		/* mov %rsp, %ebp */
+	testl $3, CS(%rdi)
+	je 1f
+	SWAPGS
+	/*
+	 * irqcount is used to check if a CPU is already on an interrupt stack
+	 * or not. While this is essentially redundant with preempt_count it is
+	 * a little cheaper to use a separate counter in the PDA (short of
+	 * moving irq_enter into assembly, which would be too much work)
+	 */
+1:	incl %gs:pda_irqcount
+	jne 2f
+	popq_cfi %rax			/* move return address... */
+	mov %gs:pda_irqstackptr,%rsp
+	EMPTY_FRAME 0
+	pushq_cfi %rax			/* ... to the new stack */
+	/*
+	 * We entered an interrupt context - irqs are off:
+	 */
+2:	TRACE_IRQS_OFF
+	ret
+	CFI_ENDPROC
+END(save_args)
+
+ENTRY(save_rest)
+	PARTIAL_FRAME 1 REST_SKIP+8
+	movq 5*8+16(%rsp), %r11	/* save return address */
+	movq_cfi rbx, RBX+16
+	movq_cfi rbp, RBP+16
+	movq_cfi r12, R12+16
+	movq_cfi r13, R13+16
+	movq_cfi r14, R14+16
+	movq_cfi r15, R15+16
+	movq %r11, 8(%rsp)	/* return address */
+	FIXUP_TOP_OF_STACK %r11, 16
+	ret
+	CFI_ENDPROC
+END(save_rest)
+
+/* save complete stack frame */
+ENTRY(save_paranoid)
+	XCPT_FRAME 1 RDI+8
+	cld
+	movq_cfi rdi, RDI+8
+	movq_cfi rsi, RSI+8
+	movq_cfi rdx, RDX+8
+	movq_cfi rcx, RCX+8
+	movq_cfi rax, RAX+8
+	movq_cfi r8, R8+8
+	movq_cfi r9, R9+8
+	movq_cfi r10, R10+8
+	movq_cfi r11, R11+8
+	movq_cfi rbx, RBX+8
+	movq_cfi rbp, RBP+8
+	movq_cfi r12, R12+8
+	movq_cfi r13, R13+8
+	movq_cfi r14, R14+8
+	movq_cfi r15, R15+8
+	movl $1,%ebx
+	movl $MSR_GS_BASE,%ecx
+	rdmsr
+	testl %edx,%edx
+	js 1f	/* negative -> in kernel */
+	SWAPGS
+	xorl %ebx,%ebx
+1:	ret
+	CFI_ENDPROC
+END(save_paranoid)
+
+/*
+ * A newly forked process directly context switches into this address.
+ *
+ * rdi: prev task we switched from
  */
-/* rdi:	prev */
 ENTRY(ret_from_fork)
-	CFI_DEFAULT_STACK
+	DEFAULT_FRAME
+
 	push kernel_eflags(%rip)
 	CFI_ADJUST_CFA_OFFSET 8
-	popf				# reset kernel eflags
+	popf					# reset kernel eflags
 	CFI_ADJUST_CFA_OFFSET -8
-	call schedule_tail
+
+	call schedule_tail			# rdi: 'prev' task parameter
+
 	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+
 	CFI_REMEMBER_STATE
-	jnz rff_trace
-rff_action:
 	RESTORE_REST
-	testl $3,CS-ARGOFFSET(%rsp)	# from kernel_thread?
+
+	testl $3, CS-ARGOFFSET(%rsp)		# from kernel_thread?
 	je   int_ret_from_sys_call
-	testl $_TIF_IA32,TI_flags(%rcx)
+
+	testl $_TIF_IA32, TI_flags(%rcx)	# 32-bit compat task needs IRET
 	jnz  int_ret_from_sys_call
-	RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
-	jmp ret_from_sys_call
+
+	RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
+	jmp ret_from_sys_call			# go to the SYSRET fastpath
+
 	CFI_RESTORE_STATE
-rff_trace:
-	movq %rsp,%rdi
-	call syscall_trace_leave
-	GET_THREAD_INFO(%rcx)
-	jmp rff_action
 	CFI_ENDPROC
 END(ret_from_fork)
 
@@ -390,10 +509,13 @@ sysret_signal:
 	jc sysret_audit
 #endif
 	/* edx:	work flags (arg3) */
-	leaq do_notify_resume(%rip),%rax
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
 	xorl %esi,%esi # oldset -> arg2
-	call ptregscall_common
+	SAVE_REST
+	FIXUP_TOP_OF_STACK %r11
+	call do_notify_resume
+	RESTORE_TOP_OF_STACK %r11
+	RESTORE_REST
 	movl $_TIF_WORK_MASK,%edi
 	/* Use IRET because user could have changed frame. This
 	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
@@ -537,18 +659,20 @@ END(system_call)
 /*
  * Certain special system calls that need to save a complete full stack frame.
  */
-
 	.macro PTREGSCALL label,func,arg
-	.globl \label
-\label:
-	leaq	\func(%rip),%rax
-	leaq    -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
-	jmp	ptregscall_common
+ENTRY(\label)
+	PARTIAL_FRAME 1 8		/* offset 8: return address */
+	subq $REST_SKIP, %rsp
+	CFI_ADJUST_CFA_OFFSET REST_SKIP
+	call save_rest
+	DEFAULT_FRAME 0 8		/* offset 8: return address */
+	leaq 8(%rsp), \arg	/* pt_regs pointer */
+	call \func
+	jmp ptregscall_common
+	CFI_ENDPROC
 END(\label)
 	.endm
 
-	CFI_STARTPROC
-
 	PTREGSCALL stub_clone, sys_clone, %r8
 	PTREGSCALL stub_fork, sys_fork, %rdi
 	PTREGSCALL stub_vfork, sys_vfork, %rdi
@@ -556,22 +680,15 @@ END(\label)
 	PTREGSCALL stub_iopl, sys_iopl, %rsi
 
 ENTRY(ptregscall_common)
-	popq %r11
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_REGISTER rip, r11
-	SAVE_REST
-	movq %r11, %r15
-	CFI_REGISTER rip, r15
-	FIXUP_TOP_OF_STACK %r11
-	call *%rax
-	RESTORE_TOP_OF_STACK %r11
-	movq %r15, %r11
-	CFI_REGISTER rip, r11
-	RESTORE_REST
-	pushq %r11
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rip, 0
-	ret
+	DEFAULT_FRAME 1 8	/* offset 8: return address */
+	RESTORE_TOP_OF_STACK %r11, 8
+	movq_cfi_restore R15+8, r15
+	movq_cfi_restore R14+8, r14
+	movq_cfi_restore R13+8, r13
+	movq_cfi_restore R12+8, r12
+	movq_cfi_restore RBP+8, rbp
+	movq_cfi_restore RBX+8, rbx
+	ret $REST_SKIP		/* pop extended registers */
 	CFI_ENDPROC
 END(ptregscall_common)
 
@@ -610,70 +727,70 @@ ENTRY(stub_rt_sigreturn)
 END(stub_rt_sigreturn)
 
 /*
- * initial frame state for interrupts and exceptions
+ * Build the entry stubs and pointer table with some assembler magic.
+ * We pack 7 stubs into a single 32-byte chunk, which will fit in a
+ * single cache line on all modern x86 implementations.
  */
-	.macro _frame ref
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA rsp,SS+8-\ref
-	/*CFI_REL_OFFSET ss,SS-\ref*/
-	CFI_REL_OFFSET rsp,RSP-\ref
-	/*CFI_REL_OFFSET rflags,EFLAGS-\ref*/
-	/*CFI_REL_OFFSET cs,CS-\ref*/
-	CFI_REL_OFFSET rip,RIP-\ref
-	.endm
+	.section .init.rodata,"a"
+ENTRY(interrupt)
+	.text
+	.p2align 5
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
+ENTRY(irq_entries_start)
+	INTR_FRAME
+vector=FIRST_EXTERNAL_VECTOR
+.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7
+	.balign 32
+  .rept	7
+    .if vector < NR_VECTORS
+      .if vector <> FIRST_EXTERNAL_VECTOR
+	CFI_ADJUST_CFA_OFFSET -8
+      .endif
+1:	pushq $(~vector+0x80)	/* Note: always in signed byte range */
+	CFI_ADJUST_CFA_OFFSET 8
+      .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
+	jmp 2f
+      .endif
+      .previous
+	.quad 1b
+      .text
+vector=vector+1
+    .endif
+  .endr
+2:	jmp common_interrupt
+.endr
+	CFI_ENDPROC
+END(irq_entries_start)
 
-/* initial frame state for interrupts (and exceptions without error code) */
-#define INTR_FRAME _frame RIP
-/* initial frame state for exceptions with error code (and interrupts with
-   vector already pushed) */
-#define XCPT_FRAME _frame ORIG_RAX
+.previous
+END(interrupt)
+.previous
 
-/* 
+/*
  * Interrupt entry/exit.
  *
  * Interrupt entry points save only callee clobbered registers in fast path.
- *	
- * Entry runs with interrupts off.	
- */ 
+ *
+ * Entry runs with interrupts off.
+ */
 
-/* 0(%rsp): interrupt number */ 
+/* 0(%rsp): ~(interrupt number) */
 	.macro interrupt func
-	cld
-	SAVE_ARGS
-	leaq -ARGOFFSET(%rsp),%rdi	# arg1 for handler
-	pushq %rbp
-	/*
-	 * Save rbp twice: One is for marking the stack frame, as usual, and the
-	 * other, to fill pt_regs properly. This is because bx comes right
-	 * before the last saved register in that structure, and not bp. If the
-	 * base pointer were in the place bx is today, this would not be needed.
-	 */
-	movq %rbp, -8(%rsp)
-	CFI_ADJUST_CFA_OFFSET	8
-	CFI_REL_OFFSET		rbp, 0
-	movq %rsp,%rbp
-	CFI_DEF_CFA_REGISTER	rbp
-	testl $3,CS(%rdi)
-	je 1f
-	SWAPGS
-	/* irqcount is used to check if a CPU is already on an interrupt
-	   stack or not. While this is essentially redundant with preempt_count
-	   it is a little cheaper to use a separate counter in the PDA
-	   (short of moving irq_enter into assembly, which would be too
-	    much work) */
-1:	incl	%gs:pda_irqcount
-	cmoveq %gs:pda_irqstackptr,%rsp
-	push    %rbp			# backlink for old unwinder
-	/*
-	 * We entered an interrupt context - irqs are off:
-	 */
-	TRACE_IRQS_OFF
+	subq $10*8, %rsp
+	CFI_ADJUST_CFA_OFFSET 10*8
+	call save_args
+	PARTIAL_FRAME 0
 	call \func
 	.endm
 
-ENTRY(common_interrupt)
+	/*
+	 * The interrupt stubs push (~vector+0x80) onto the stack and
+	 * then jump to common_interrupt.
+	 */
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
+common_interrupt:
 	XCPT_FRAME
+	addq $-0x80,(%rsp)		/* Adjust vector to [-256,-1] range */
 	interrupt do_IRQ
 	/* 0(%rsp): oldrsp-ARGOFFSET */
 ret_from_intr:
@@ -808,315 +925,202 @@ END(common_interrupt)
 /*
  * APIC interrupts.
  */
-	.macro apicinterrupt num,func
+.macro apicinterrupt num sym do_sym
+ENTRY(\sym)
 	INTR_FRAME
 	pushq $~(\num)
 	CFI_ADJUST_CFA_OFFSET 8
-	interrupt \func
+	interrupt \do_sym
 	jmp ret_from_intr
 	CFI_ENDPROC
-	.endm
-
-ENTRY(thermal_interrupt)
-	apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt
-END(thermal_interrupt)
-
-ENTRY(threshold_interrupt)
-	apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt
-END(threshold_interrupt)
+END(\sym)
+.endm
 
 #ifdef CONFIG_SMP
-ENTRY(reschedule_interrupt)
-	apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt
-END(reschedule_interrupt)
-
-	.macro INVALIDATE_ENTRY num
-ENTRY(invalidate_interrupt\num)
-	apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt
-END(invalidate_interrupt\num)
-	.endm
-
-	INVALIDATE_ENTRY 0
-	INVALIDATE_ENTRY 1
-	INVALIDATE_ENTRY 2
-	INVALIDATE_ENTRY 3
-	INVALIDATE_ENTRY 4
-	INVALIDATE_ENTRY 5
-	INVALIDATE_ENTRY 6
-	INVALIDATE_ENTRY 7
-
-ENTRY(call_function_interrupt)
-	apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
-END(call_function_interrupt)
-ENTRY(call_function_single_interrupt)
-	apicinterrupt CALL_FUNCTION_SINGLE_VECTOR,smp_call_function_single_interrupt
-END(call_function_single_interrupt)
-ENTRY(irq_move_cleanup_interrupt)
-	apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
-END(irq_move_cleanup_interrupt)
+apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
+	irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
 #endif
 
-ENTRY(apic_timer_interrupt)
-	apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
-END(apic_timer_interrupt)
+apicinterrupt UV_BAU_MESSAGE \
+	uv_bau_message_intr1 uv_bau_message_interrupt
+apicinterrupt LOCAL_TIMER_VECTOR \
+	apic_timer_interrupt smp_apic_timer_interrupt
 
-ENTRY(uv_bau_message_intr1)
-	apicinterrupt 220,uv_bau_message_interrupt
-END(uv_bau_message_intr1)
+#ifdef CONFIG_SMP
+apicinterrupt INVALIDATE_TLB_VECTOR_START+0 \
+	invalidate_interrupt0 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+1 \
+	invalidate_interrupt1 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+2 \
+	invalidate_interrupt2 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+3 \
+	invalidate_interrupt3 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+4 \
+	invalidate_interrupt4 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+5 \
+	invalidate_interrupt5 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+6 \
+	invalidate_interrupt6 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+7 \
+	invalidate_interrupt7 smp_invalidate_interrupt
+#endif
 
-ENTRY(error_interrupt)
-	apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
-END(error_interrupt)
+apicinterrupt THRESHOLD_APIC_VECTOR \
+	threshold_interrupt mce_threshold_interrupt
+apicinterrupt THERMAL_APIC_VECTOR \
+	thermal_interrupt smp_thermal_interrupt
 
-ENTRY(spurious_interrupt)
-	apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt
-END(spurious_interrupt)
+#ifdef CONFIG_SMP
+apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
+	call_function_single_interrupt smp_call_function_single_interrupt
+apicinterrupt CALL_FUNCTION_VECTOR \
+	call_function_interrupt smp_call_function_interrupt
+apicinterrupt RESCHEDULE_VECTOR \
+	reschedule_interrupt smp_reschedule_interrupt
+#endif
+
+apicinterrupt ERROR_APIC_VECTOR \
+	error_interrupt smp_error_interrupt
+apicinterrupt SPURIOUS_APIC_VECTOR \
+	spurious_interrupt smp_spurious_interrupt
 
 /*
  * Exception entry points.
  */
-	.macro zeroentry sym
+.macro zeroentry sym do_sym
+ENTRY(\sym)
 	INTR_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq $0	/* push error code/oldrax */
-	CFI_ADJUST_CFA_OFFSET 8
-	pushq %rax	/* push real oldrax to the rdi slot */
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rax,0
-	leaq  \sym(%rip),%rax
-	jmp error_entry
+	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
+	subq $15*8,%rsp
+	CFI_ADJUST_CFA_OFFSET 15*8
+	call error_entry
+	DEFAULT_FRAME 0
+	movq %rsp,%rdi		/* pt_regs pointer */
+	xorl %esi,%esi		/* no error code */
+	call \do_sym
+	jmp error_exit		/* %ebx: no swapgs flag */
 	CFI_ENDPROC
-	.endm
+END(\sym)
+.endm
 
-	.macro errorentry sym
+.macro paranoidzeroentry sym do_sym
+ENTRY(\sym)
+	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	pushq $-1		/* ORIG_RAX: no syscall to restart */
+	CFI_ADJUST_CFA_OFFSET 8
+	subq $15*8, %rsp
+	call save_paranoid
+	TRACE_IRQS_OFF
+	movq %rsp,%rdi		/* pt_regs pointer */
+	xorl %esi,%esi		/* no error code */
+	call \do_sym
+	jmp paranoid_exit	/* %ebx: no swapgs flag */
+	CFI_ENDPROC
+END(\sym)
+.endm
+
+.macro paranoidzeroentry_ist sym do_sym ist
+ENTRY(\sym)
+	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	pushq $-1		/* ORIG_RAX: no syscall to restart */
+	CFI_ADJUST_CFA_OFFSET 8
+	subq $15*8, %rsp
+	call save_paranoid
+	TRACE_IRQS_OFF
+	movq %rsp,%rdi		/* pt_regs pointer */
+	xorl %esi,%esi		/* no error code */
+	movq %gs:pda_data_offset, %rbp
+	subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+	call \do_sym
+	addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+	jmp paranoid_exit	/* %ebx: no swapgs flag */
+	CFI_ENDPROC
+END(\sym)
+.endm
+
+.macro errorentry sym do_sym
+ENTRY(\sym)
 	XCPT_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq %rax
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rax,0
-	leaq  \sym(%rip),%rax
-	jmp error_entry
+	subq $15*8,%rsp
+	CFI_ADJUST_CFA_OFFSET 15*8
+	call error_entry
+	DEFAULT_FRAME 0
+	movq %rsp,%rdi			/* pt_regs pointer */
+	movq ORIG_RAX(%rsp),%rsi	/* get error code */
+	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
+	call \do_sym
+	jmp error_exit			/* %ebx: no swapgs flag */
 	CFI_ENDPROC
-	.endm
+END(\sym)
+.endm
 
 	/* error code is on the stack already */
-	/* handle NMI like exceptions that can happen everywhere */
-	.macro paranoidentry sym, ist=0, irqtrace=1
-	SAVE_ALL
-	cld
-	movl $1,%ebx
-	movl  $MSR_GS_BASE,%ecx
-	rdmsr
-	testl %edx,%edx
-	js    1f
-	SWAPGS
-	xorl  %ebx,%ebx
-1:
-	.if \ist
-	movq	%gs:pda_data_offset, %rbp
-	.endif
-	.if \irqtrace
+.macro paranoiderrorentry sym do_sym
+ENTRY(\sym)
+	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	subq $15*8,%rsp
+	CFI_ADJUST_CFA_OFFSET 15*8
+	call save_paranoid
+	DEFAULT_FRAME 0
 	TRACE_IRQS_OFF
-	.endif
-	movq %rsp,%rdi
-	movq ORIG_RAX(%rsp),%rsi
-	movq $-1,ORIG_RAX(%rsp)
-	.if \ist
-	subq	$EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
-	.endif
-	call \sym
-	.if \ist
-	addq	$EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
-	.endif
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	.if \irqtrace
-	TRACE_IRQS_OFF
-	.endif
-	.endm
-
-	/*
- 	 * "Paranoid" exit path from exception stack.
-  	 * Paranoid because this is used by NMIs and cannot take
-	 * any kernel state for granted.
-	 * We don't do kernel preemption checks here, because only
-	 * NMI should be common and it does not enable IRQs and
-	 * cannot get reschedule ticks.
-	 *
-	 * "trace" is 0 for the NMI handler only, because irq-tracing
-	 * is fundamentally NMI-unsafe. (we cannot change the soft and
-	 * hard flags at once, atomically)
-	 */
-	.macro paranoidexit trace=1
-	/* ebx:	no swapgs flag */
-paranoid_exit\trace:
-	testl %ebx,%ebx				/* swapgs needed? */
-	jnz paranoid_restore\trace
-	testl $3,CS(%rsp)
-	jnz   paranoid_userspace\trace
-paranoid_swapgs\trace:
-	.if \trace
-	TRACE_IRQS_IRETQ 0
-	.endif
-	SWAPGS_UNSAFE_STACK
-paranoid_restore\trace:
-	RESTORE_ALL 8
-	jmp irq_return
-paranoid_userspace\trace:
-	GET_THREAD_INFO(%rcx)
-	movl TI_flags(%rcx),%ebx
-	andl $_TIF_WORK_MASK,%ebx
-	jz paranoid_swapgs\trace
-	movq %rsp,%rdi			/* &pt_regs */
-	call sync_regs
-	movq %rax,%rsp			/* switch stack for scheduling */
-	testl $_TIF_NEED_RESCHED,%ebx
-	jnz paranoid_schedule\trace
-	movl %ebx,%edx			/* arg3: thread flags */
-	.if \trace
-	TRACE_IRQS_ON
-	.endif
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	xorl %esi,%esi 			/* arg2: oldset */
-	movq %rsp,%rdi 			/* arg1: &pt_regs */
-	call do_notify_resume
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	.if \trace
-	TRACE_IRQS_OFF
-	.endif
-	jmp paranoid_userspace\trace
-paranoid_schedule\trace:
-	.if \trace
-	TRACE_IRQS_ON
-	.endif
-	ENABLE_INTERRUPTS(CLBR_ANY)
-	call schedule
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	.if \trace
-	TRACE_IRQS_OFF
-	.endif
-	jmp paranoid_userspace\trace
-	CFI_ENDPROC
-	.endm
-
-/*
- * Exception entry point. This expects an error code/orig_rax on the stack
- * and the exception handler in %rax.
- */
-KPROBE_ENTRY(error_entry)
-	_frame RDI
-	CFI_REL_OFFSET rax,0
-	/* rdi slot contains rax, oldrax contains error code */
-	cld
-	subq  $14*8,%rsp
-	CFI_ADJUST_CFA_OFFSET	(14*8)
-	movq %rsi,13*8(%rsp)
-	CFI_REL_OFFSET	rsi,RSI
-	movq 14*8(%rsp),%rsi	/* load rax from rdi slot */
-	CFI_REGISTER	rax,rsi
-	movq %rdx,12*8(%rsp)
-	CFI_REL_OFFSET	rdx,RDX
-	movq %rcx,11*8(%rsp)
-	CFI_REL_OFFSET	rcx,RCX
-	movq %rsi,10*8(%rsp)	/* store rax */
-	CFI_REL_OFFSET	rax,RAX
-	movq %r8, 9*8(%rsp)
-	CFI_REL_OFFSET	r8,R8
-	movq %r9, 8*8(%rsp)
-	CFI_REL_OFFSET	r9,R9
-	movq %r10,7*8(%rsp)
-	CFI_REL_OFFSET	r10,R10
-	movq %r11,6*8(%rsp)
-	CFI_REL_OFFSET	r11,R11
-	movq %rbx,5*8(%rsp)
-	CFI_REL_OFFSET	rbx,RBX
-	movq %rbp,4*8(%rsp)
-	CFI_REL_OFFSET	rbp,RBP
-	movq %r12,3*8(%rsp)
-	CFI_REL_OFFSET	r12,R12
-	movq %r13,2*8(%rsp)
-	CFI_REL_OFFSET	r13,R13
-	movq %r14,1*8(%rsp)
-	CFI_REL_OFFSET	r14,R14
-	movq %r15,(%rsp)
-	CFI_REL_OFFSET	r15,R15
-	xorl %ebx,%ebx
-	testl $3,CS(%rsp)
-	je  error_kernelspace
-error_swapgs:
-	SWAPGS
-error_sti:
-	TRACE_IRQS_OFF
-	movq %rdi,RDI(%rsp)
-	CFI_REL_OFFSET	rdi,RDI
-	movq %rsp,%rdi
+	movq %rsp,%rdi			/* pt_regs pointer */
 	movq ORIG_RAX(%rsp),%rsi	/* get error code */
-	movq $-1,ORIG_RAX(%rsp)
-	call *%rax
-	/* ebx:	no swapgs flag (1: don't need swapgs, 0: need it) */
-error_exit:
-	movl %ebx,%eax
-	RESTORE_REST
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	GET_THREAD_INFO(%rcx)
-	testl %eax,%eax
-	jne  retint_kernel
-	LOCKDEP_SYS_EXIT_IRQ
-	movl  TI_flags(%rcx),%edx
-	movl  $_TIF_WORK_MASK,%edi
-	andl  %edi,%edx
-	jnz  retint_careful
-	jmp retint_swapgs
+	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
+	call \do_sym
+	jmp paranoid_exit		/* %ebx: no swapgs flag */
 	CFI_ENDPROC
+END(\sym)
+.endm
 
-error_kernelspace:
-	incl %ebx
-       /* There are two places in the kernel that can potentially fault with
-          usergs. Handle them here. The exception handlers after
-	   iret run with kernel gs again, so don't set the user space flag.
-	   B stepping K8s sometimes report an truncated RIP for IRET
-	   exceptions returning to compat mode. Check for these here too. */
-	leaq irq_return(%rip),%rcx
-	cmpq %rcx,RIP(%rsp)
-	je   error_swapgs
-	movl %ecx,%ecx	/* zero extend */
-	cmpq %rcx,RIP(%rsp)
-	je   error_swapgs
-	cmpq $gs_change,RIP(%rsp)
-        je   error_swapgs
-	jmp  error_sti
-KPROBE_END(error_entry)
+zeroentry divide_error do_divide_error
+zeroentry overflow do_overflow
+zeroentry bounds do_bounds
+zeroentry invalid_op do_invalid_op
+zeroentry device_not_available do_device_not_available
+paranoiderrorentry double_fault do_double_fault
+zeroentry coprocessor_segment_overrun do_coprocessor_segment_overrun
+errorentry invalid_TSS do_invalid_TSS
+errorentry segment_not_present do_segment_not_present
+zeroentry spurious_interrupt_bug do_spurious_interrupt_bug
+zeroentry coprocessor_error do_coprocessor_error
+errorentry alignment_check do_alignment_check
+zeroentry simd_coprocessor_error do_simd_coprocessor_error
 
-       /* Reload gs selector with exception handling */
-       /* edi:  new selector */
+	/* Reload gs selector with exception handling */
+	/* edi:  new selector */
 ENTRY(native_load_gs_index)
 	CFI_STARTPROC
 	pushf
 	CFI_ADJUST_CFA_OFFSET 8
 	DISABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
-        SWAPGS
+	SWAPGS
 gs_change:
-        movl %edi,%gs
+	movl %edi,%gs
 2:	mfence		/* workaround */
 	SWAPGS
-        popf
+	popf
 	CFI_ADJUST_CFA_OFFSET -8
-        ret
+	ret
 	CFI_ENDPROC
-ENDPROC(native_load_gs_index)
+END(native_load_gs_index)
 
-        .section __ex_table,"a"
-        .align 8
-        .quad gs_change,bad_gs
-        .previous
-        .section .fixup,"ax"
+	.section __ex_table,"a"
+	.align 8
+	.quad gs_change,bad_gs
+	.previous
+	.section .fixup,"ax"
 	/* running with kernelgs */
 bad_gs:
 	SWAPGS			/* switch back to user gs */
 	xorl %eax,%eax
-        movl %eax,%gs
-        jmp  2b
-        .previous
+	movl %eax,%gs
+	jmp  2b
+	.previous
 
 /*
  * Create a kernel thread.
@@ -1151,15 +1155,15 @@ ENTRY(kernel_thread)
 	 * so internally to the x86_64 port you can rely on kernel_thread()
 	 * not to reschedule the child before returning, this avoids the need
 	 * of hacks for example to fork off the per-CPU idle tasks.
-         * [Hopefully no generic code relies on the reschedule -AK]
+	 * [Hopefully no generic code relies on the reschedule -AK]
 	 */
 	RESTORE_ALL
 	UNFAKE_STACK_FRAME
 	ret
 	CFI_ENDPROC
-ENDPROC(kernel_thread)
+END(kernel_thread)
 
-child_rip:
+ENTRY(child_rip)
 	pushq $0		# fake return address
 	CFI_STARTPROC
 	/*
@@ -1174,7 +1178,7 @@ child_rip:
 	call do_exit
 	ud2			# padding for call trace
 	CFI_ENDPROC
-ENDPROC(child_rip)
+END(child_rip)
 
 /*
  * execve(). This function needs to use IRET, not SYSRET, to set up all state properly.
@@ -1205,129 +1209,7 @@ ENTRY(kernel_execve)
 	UNFAKE_STACK_FRAME
 	ret
 	CFI_ENDPROC
-ENDPROC(kernel_execve)
-
-KPROBE_ENTRY(page_fault)
-	errorentry do_page_fault
-KPROBE_END(page_fault)
-
-ENTRY(coprocessor_error)
-	zeroentry do_coprocessor_error
-END(coprocessor_error)
-
-ENTRY(simd_coprocessor_error)
-	zeroentry do_simd_coprocessor_error
-END(simd_coprocessor_error)
-
-ENTRY(device_not_available)
-	zeroentry do_device_not_available
-END(device_not_available)
-
-	/* runs on exception stack */
-KPROBE_ENTRY(debug)
- 	INTR_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8
-	paranoidentry do_debug, DEBUG_STACK
-	paranoidexit
-KPROBE_END(debug)
-
-	/* runs on exception stack */
-KPROBE_ENTRY(nmi)
-	INTR_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq $-1
-	CFI_ADJUST_CFA_OFFSET 8
-	paranoidentry do_nmi, 0, 0
-#ifdef CONFIG_TRACE_IRQFLAGS
-	paranoidexit 0
-#else
-	jmp paranoid_exit1
- 	CFI_ENDPROC
-#endif
-KPROBE_END(nmi)
-
-KPROBE_ENTRY(int3)
- 	INTR_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
- 	pushq $0
- 	CFI_ADJUST_CFA_OFFSET 8
- 	paranoidentry do_int3, DEBUG_STACK
- 	jmp paranoid_exit1
- 	CFI_ENDPROC
-KPROBE_END(int3)
-
-ENTRY(overflow)
-	zeroentry do_overflow
-END(overflow)
-
-ENTRY(bounds)
-	zeroentry do_bounds
-END(bounds)
-
-ENTRY(invalid_op)
-	zeroentry do_invalid_op
-END(invalid_op)
-
-ENTRY(coprocessor_segment_overrun)
-	zeroentry do_coprocessor_segment_overrun
-END(coprocessor_segment_overrun)
-
-	/* runs on exception stack */
-ENTRY(double_fault)
-	XCPT_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	paranoidentry do_double_fault
-	jmp paranoid_exit1
-	CFI_ENDPROC
-END(double_fault)
-
-ENTRY(invalid_TSS)
-	errorentry do_invalid_TSS
-END(invalid_TSS)
-
-ENTRY(segment_not_present)
-	errorentry do_segment_not_present
-END(segment_not_present)
-
-	/* runs on exception stack */
-ENTRY(stack_segment)
-	XCPT_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	paranoidentry do_stack_segment
-	jmp paranoid_exit1
-	CFI_ENDPROC
-END(stack_segment)
-
-KPROBE_ENTRY(general_protection)
-	errorentry do_general_protection
-KPROBE_END(general_protection)
-
-ENTRY(alignment_check)
-	errorentry do_alignment_check
-END(alignment_check)
-
-ENTRY(divide_error)
-	zeroentry do_divide_error
-END(divide_error)
-
-ENTRY(spurious_interrupt_bug)
-	zeroentry do_spurious_interrupt_bug
-END(spurious_interrupt_bug)
-
-#ifdef CONFIG_X86_MCE
-	/* runs on exception stack */
-ENTRY(machine_check)
-	INTR_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8
-	paranoidentry do_machine_check
-	jmp paranoid_exit1
-	CFI_ENDPROC
-END(machine_check)
-#endif
+END(kernel_execve)
 
 /* Call softirq on interrupt stack. Interrupts are off. */
 ENTRY(call_softirq)
@@ -1347,40 +1229,33 @@ ENTRY(call_softirq)
 	decl %gs:pda_irqcount
 	ret
 	CFI_ENDPROC
-ENDPROC(call_softirq)
-
-KPROBE_ENTRY(ignore_sysret)
-	CFI_STARTPROC
-	mov $-ENOSYS,%eax
-	sysret
-	CFI_ENDPROC
-ENDPROC(ignore_sysret)
+END(call_softirq)
 
 #ifdef CONFIG_XEN
-ENTRY(xen_hypervisor_callback)
-	zeroentry xen_do_hypervisor_callback
-END(xen_hypervisor_callback)
+zeroentry xen_hypervisor_callback xen_do_hypervisor_callback
 
 /*
-# A note on the "critical region" in our callback handler.
-# We want to avoid stacking callback handlers due to events occurring
-# during handling of the last event. To do this, we keep events disabled
-# until we've done all processing. HOWEVER, we must enable events before
-# popping the stack frame (can't be done atomically) and so it would still
-# be possible to get enough handler activations to overflow the stack.
-# Although unlikely, bugs of that kind are hard to track down, so we'd
-# like to avoid the possibility.
-# So, on entry to the handler we detect whether we interrupted an
-# existing activation in its critical region -- if so, we pop the current
-# activation and restart the handler using the previous one.
-*/
+ * A note on the "critical region" in our callback handler.
+ * We want to avoid stacking callback handlers due to events occurring
+ * during handling of the last event. To do this, we keep events disabled
+ * until we've done all processing. HOWEVER, we must enable events before
+ * popping the stack frame (can't be done atomically) and so it would still
+ * be possible to get enough handler activations to overflow the stack.
+ * Although unlikely, bugs of that kind are hard to track down, so we'd
+ * like to avoid the possibility.
+ * So, on entry to the handler we detect whether we interrupted an
+ * existing activation in its critical region -- if so, we pop the current
+ * activation and restart the handler using the previous one.
+ */
 ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
 	CFI_STARTPROC
-/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
-   see the correct pointer to the pt_regs */
+/*
+ * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+ * see the correct pointer to the pt_regs
+ */
 	movq %rdi, %rsp            # we don't return, adjust the stack frame
 	CFI_ENDPROC
-	CFI_DEFAULT_STACK
+	DEFAULT_FRAME
 11:	incl %gs:pda_irqcount
 	movq %rsp,%rbp
 	CFI_DEF_CFA_REGISTER rbp
@@ -1395,23 +1270,26 @@ ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
 END(do_hypervisor_callback)
 
 /*
-# Hypervisor uses this for application faults while it executes.
-# We get here for two reasons:
-#  1. Fault while reloading DS, ES, FS or GS
-#  2. Fault while executing IRET
-# Category 1 we do not need to fix up as Xen has already reloaded all segment
-# registers that could be reloaded and zeroed the others.
-# Category 2 we fix up by killing the current process. We cannot use the
-# normal Linux return path in this case because if we use the IRET hypercall
-# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
-# We distinguish between categories by comparing each saved segment register
-# with its current contents: any discrepancy means we in category 1.
-*/
+ * Hypervisor uses this for application faults while it executes.
+ * We get here for two reasons:
+ *  1. Fault while reloading DS, ES, FS or GS
+ *  2. Fault while executing IRET
+ * Category 1 we do not need to fix up as Xen has already reloaded all segment
+ * registers that could be reloaded and zeroed the others.
+ * Category 2 we fix up by killing the current process. We cannot use the
+ * normal Linux return path in this case because if we use the IRET hypercall
+ * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+ * We distinguish between categories by comparing each saved segment register
+ * with its current contents: any discrepancy means we in category 1.
+ */
 ENTRY(xen_failsafe_callback)
-	framesz = (RIP-0x30)	/* workaround buggy gas */
-	_frame framesz
-	CFI_REL_OFFSET rcx, 0
-	CFI_REL_OFFSET r11, 8
+	INTR_FRAME 1 (6*8)
+	/*CFI_REL_OFFSET gs,GS*/
+	/*CFI_REL_OFFSET fs,FS*/
+	/*CFI_REL_OFFSET es,ES*/
+	/*CFI_REL_OFFSET ds,DS*/
+	CFI_REL_OFFSET r11,8
+	CFI_REL_OFFSET rcx,0
 	movw %ds,%cx
 	cmpw %cx,0x10(%rsp)
 	CFI_REMEMBER_STATE
@@ -1432,12 +1310,9 @@ ENTRY(xen_failsafe_callback)
 	CFI_RESTORE r11
 	addq $0x30,%rsp
 	CFI_ADJUST_CFA_OFFSET -0x30
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8
-	pushq %r11
-	CFI_ADJUST_CFA_OFFSET 8
-	pushq %rcx
-	CFI_ADJUST_CFA_OFFSET 8
+	pushq_cfi $0	/* RIP */
+	pushq_cfi %r11
+	pushq_cfi %rcx
 	jmp general_protection
 	CFI_RESTORE_STATE
 1:	/* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
@@ -1447,11 +1322,223 @@ ENTRY(xen_failsafe_callback)
 	CFI_RESTORE r11
 	addq $0x30,%rsp
 	CFI_ADJUST_CFA_OFFSET -0x30
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8
+	pushq_cfi $0
 	SAVE_ALL
 	jmp error_exit
 	CFI_ENDPROC
 END(xen_failsafe_callback)
 
 #endif /* CONFIG_XEN */
+
+/*
+ * Some functions should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
+
+paranoidzeroentry_ist debug do_debug DEBUG_STACK
+paranoidzeroentry_ist int3 do_int3 DEBUG_STACK
+paranoiderrorentry stack_segment do_stack_segment
+errorentry general_protection do_general_protection
+errorentry page_fault do_page_fault
+#ifdef CONFIG_X86_MCE
+paranoidzeroentry machine_check do_machine_check
+#endif
+
+	/*
+	 * "Paranoid" exit path from exception stack.
+	 * Paranoid because this is used by NMIs and cannot take
+	 * any kernel state for granted.
+	 * We don't do kernel preemption checks here, because only
+	 * NMI should be common and it does not enable IRQs and
+	 * cannot get reschedule ticks.
+	 *
+	 * "trace" is 0 for the NMI handler only, because irq-tracing
+	 * is fundamentally NMI-unsafe. (we cannot change the soft and
+	 * hard flags at once, atomically)
+	 */
+
+	/* ebx:	no swapgs flag */
+ENTRY(paranoid_exit)
+	INTR_FRAME
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	testl %ebx,%ebx				/* swapgs needed? */
+	jnz paranoid_restore
+	testl $3,CS(%rsp)
+	jnz   paranoid_userspace
+paranoid_swapgs:
+	TRACE_IRQS_IRETQ 0
+	SWAPGS_UNSAFE_STACK
+paranoid_restore:
+	RESTORE_ALL 8
+	jmp irq_return
+paranoid_userspace:
+	GET_THREAD_INFO(%rcx)
+	movl TI_flags(%rcx),%ebx
+	andl $_TIF_WORK_MASK,%ebx
+	jz paranoid_swapgs
+	movq %rsp,%rdi			/* &pt_regs */
+	call sync_regs
+	movq %rax,%rsp			/* switch stack for scheduling */
+	testl $_TIF_NEED_RESCHED,%ebx
+	jnz paranoid_schedule
+	movl %ebx,%edx			/* arg3: thread flags */
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_NONE)
+	xorl %esi,%esi 			/* arg2: oldset */
+	movq %rsp,%rdi 			/* arg1: &pt_regs */
+	call do_notify_resume
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	jmp paranoid_userspace
+paranoid_schedule:
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	call schedule
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	jmp paranoid_userspace
+	CFI_ENDPROC
+END(paranoid_exit)
+
+/*
+ * Exception entry point. This expects an error code/orig_rax on the stack.
+ * returns in "no swapgs flag" in %ebx.
+ */
+ENTRY(error_entry)
+	XCPT_FRAME
+	CFI_ADJUST_CFA_OFFSET 15*8
+	/* oldrax contains error code */
+	cld
+	movq_cfi rdi, RDI+8
+	movq_cfi rsi, RSI+8
+	movq_cfi rdx, RDX+8
+	movq_cfi rcx, RCX+8
+	movq_cfi rax, RAX+8
+	movq_cfi  r8,  R8+8
+	movq_cfi  r9,  R9+8
+	movq_cfi r10, R10+8
+	movq_cfi r11, R11+8
+	movq_cfi rbx, RBX+8
+	movq_cfi rbp, RBP+8
+	movq_cfi r12, R12+8
+	movq_cfi r13, R13+8
+	movq_cfi r14, R14+8
+	movq_cfi r15, R15+8
+	xorl %ebx,%ebx
+	testl $3,CS+8(%rsp)
+	je error_kernelspace
+error_swapgs:
+	SWAPGS
+error_sti:
+	TRACE_IRQS_OFF
+	ret
+	CFI_ENDPROC
+
+/*
+ * There are two places in the kernel that can potentially fault with
+ * usergs. Handle them here. The exception handlers after iret run with
+ * kernel gs again, so don't set the user space flag. B stepping K8s
+ * sometimes report an truncated RIP for IRET exceptions returning to
+ * compat mode. Check for these here too.
+ */
+error_kernelspace:
+	incl %ebx
+	leaq irq_return(%rip),%rcx
+	cmpq %rcx,RIP+8(%rsp)
+	je error_swapgs
+	movl %ecx,%ecx	/* zero extend */
+	cmpq %rcx,RIP+8(%rsp)
+	je error_swapgs
+	cmpq $gs_change,RIP+8(%rsp)
+	je error_swapgs
+	jmp error_sti
+END(error_entry)
+
+
+/* ebx:	no swapgs flag (1: don't need swapgs, 0: need it) */
+ENTRY(error_exit)
+	DEFAULT_FRAME
+	movl %ebx,%eax
+	RESTORE_REST
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	GET_THREAD_INFO(%rcx)
+	testl %eax,%eax
+	jne retint_kernel
+	LOCKDEP_SYS_EXIT_IRQ
+	movl TI_flags(%rcx),%edx
+	movl $_TIF_WORK_MASK,%edi
+	andl %edi,%edx
+	jnz retint_careful
+	jmp retint_swapgs
+	CFI_ENDPROC
+END(error_exit)
+
+
+	/* runs on exception stack */
+ENTRY(nmi)
+	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	pushq_cfi $-1
+	subq $15*8, %rsp
+	CFI_ADJUST_CFA_OFFSET 15*8
+	call save_paranoid
+	DEFAULT_FRAME 0
+	/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
+	movq %rsp,%rdi
+	movq $-1,%rsi
+	call do_nmi
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* paranoidexit; without TRACE_IRQS_OFF */
+	/* ebx:	no swapgs flag */
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	testl %ebx,%ebx				/* swapgs needed? */
+	jnz nmi_restore
+	testl $3,CS(%rsp)
+	jnz nmi_userspace
+nmi_swapgs:
+	SWAPGS_UNSAFE_STACK
+nmi_restore:
+	RESTORE_ALL 8
+	jmp irq_return
+nmi_userspace:
+	GET_THREAD_INFO(%rcx)
+	movl TI_flags(%rcx),%ebx
+	andl $_TIF_WORK_MASK,%ebx
+	jz nmi_swapgs
+	movq %rsp,%rdi			/* &pt_regs */
+	call sync_regs
+	movq %rax,%rsp			/* switch stack for scheduling */
+	testl $_TIF_NEED_RESCHED,%ebx
+	jnz nmi_schedule
+	movl %ebx,%edx			/* arg3: thread flags */
+	ENABLE_INTERRUPTS(CLBR_NONE)
+	xorl %esi,%esi 			/* arg2: oldset */
+	movq %rsp,%rdi 			/* arg1: &pt_regs */
+	call do_notify_resume
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	jmp nmi_userspace
+nmi_schedule:
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	call schedule
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	jmp nmi_userspace
+	CFI_ENDPROC
+#else
+	jmp paranoid_exit
+	CFI_ENDPROC
+#endif
+END(nmi)
+
+ENTRY(ignore_sysret)
+	CFI_STARTPROC
+	mov $-ENOSYS,%eax
+	sysret
+	CFI_ENDPROC
+END(ignore_sysret)
+
+/*
+ * End of kprobes section
+ */
+	.popsection
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
index 845aa9803e80..607db63044a5 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit_32.c
@@ -129,7 +129,7 @@ void __init native_init_IRQ(void)
 	for (i =  FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
 		/* SYSCALL_VECTOR was reserved in trap_init. */
 		if (i != SYSCALL_VECTOR)
-			set_intr_gate(i, interrupt[i]);
+			set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
 	}
 
 
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index ff0235391285..8670b3ce626e 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -23,41 +23,6 @@
 #include <asm/apic.h>
 #include <asm/i8259.h>
 
-/*
- * Common place to define all x86 IRQ vectors
- *
- * This builds up the IRQ handler stubs using some ugly macros in irq.h
- *
- * These macros create the low-level assembly IRQ routines that save
- * register context and call do_IRQ(). do_IRQ() then does all the
- * operations that are needed to keep the AT (or SMP IOAPIC)
- * interrupt-controller happy.
- */
-
-#define IRQ_NAME2(nr) nr##_interrupt(void)
-#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
-
-/*
- *	SMP has a few special interrupts for IPI messages
- */
-
-#define BUILD_IRQ(nr)				\
-	asmlinkage void IRQ_NAME(nr);		\
-	asm("\n.text\n.p2align\n"		\
-	    "IRQ" #nr "_interrupt:\n\t"		\
-	    "push $~(" #nr ") ; "		\
-	    "jmp common_interrupt\n"		\
-	    ".previous");
-
-#define BI(x,y) \
-	BUILD_IRQ(x##y)
-
-#define BUILD_16_IRQS(x) \
-	BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
-	BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
-	BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
-	BI(x,c) BI(x,d) BI(x,e) BI(x,f)
-
 /*
  * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
  * (these are usually mapped to vectors 0x30-0x3f)
@@ -73,37 +38,6 @@
  *
  * (these are usually mapped into the 0x30-0xff vector range)
  */
-				      BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
-BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
-BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
-
-#undef BUILD_16_IRQS
-#undef BI
-
-
-#define IRQ(x,y) \
-	IRQ##x##y##_interrupt
-
-#define IRQLIST_16(x) \
-	IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
-	IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
-	IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
-	IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
-
-/* for the irq vectors */
-static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
-					  IRQLIST_16(0x2), IRQLIST_16(0x3),
-	IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
-	IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
-	IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
-};
-
-#undef IRQ
-#undef IRQLIST_16
-
-
-
 
 /*
  * IRQ2 is cascade interrupt to second interrupt controller
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 3f92b134ab90..7e558db362c1 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -165,11 +165,7 @@ static void native_smp_send_stop(void)
 void smp_reschedule_interrupt(struct pt_regs *regs)
 {
 	ack_APIC_irq();
-#ifdef CONFIG_X86_32
-	__get_cpu_var(irq_stat).irq_resched_count++;
-#else
-	add_pda(irq_resched_count, 1);
-#endif
+	inc_irq_stat(irq_resched_count);
 }
 
 void smp_call_function_interrupt(struct pt_regs *regs)
@@ -177,11 +173,7 @@ void smp_call_function_interrupt(struct pt_regs *regs)
 	ack_APIC_irq();
 	irq_enter();
 	generic_smp_call_function_interrupt();
-#ifdef CONFIG_X86_32
-	__get_cpu_var(irq_stat).irq_call_count++;
-#else
-	add_pda(irq_call_count, 1);
-#endif
+	inc_irq_stat(irq_call_count);
 	irq_exit();
 }
 
@@ -190,11 +182,7 @@ void smp_call_function_single_interrupt(struct pt_regs *regs)
 	ack_APIC_irq();
 	irq_enter();
 	generic_smp_call_function_single_interrupt();
-#ifdef CONFIG_X86_32
-	__get_cpu_var(irq_stat).irq_call_count++;
-#else
-	add_pda(irq_call_count, 1);
-#endif
+	inc_irq_stat(irq_call_count);
 	irq_exit();
 }
 
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 77b400f06ea2..65309e4cb1c0 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -75,7 +75,7 @@ EXPORT_SYMBOL(profile_pc);
 irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	/* Keep nmi watchdog up to date */
-	per_cpu(irq_stat, smp_processor_id()).irq0_irqs++;
+	inc_irq_stat(irq0_irqs);
 
 #ifdef CONFIG_X86_IO_APIC
 	if (timer_ack) {
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 1b7711b31037..891e7a7c4334 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -51,7 +51,7 @@ EXPORT_SYMBOL(profile_pc);
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
-	add_pda(irq0_irqs, 1);
+	inc_irq_stat(irq0_irqs);
 
 	global_clock_event->event_handler(global_clock_event);
 
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index 4290d918b58a..8da059f949be 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -118,7 +118,7 @@ void smp_invalidate_interrupt(struct pt_regs *regs)
 	smp_mb__after_clear_bit();
 out:
 	put_cpu_no_resched();
-	__get_cpu_var(irq_stat).irq_tlb_count++;
+	inc_irq_stat(irq_tlb_count);
 }
 
 void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index 8f919ca69494..29887d7081a9 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -154,7 +154,7 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
 out:
 	ack_APIC_irq();
 	cpu_clear(cpu, f->flush_cpumask);
-	add_pda(irq_tlb_count, 1);
+	inc_irq_stat(irq_tlb_count);
 }
 
 void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index c320c29255c2..73ece2633f47 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -481,11 +481,7 @@ do_nmi(struct pt_regs *regs, long error_code)
 {
 	nmi_enter();
 
-#ifdef CONFIG_X86_32
-	{ int cpu; cpu = smp_processor_id(); ++nmi_count(cpu); }
-#else
-	add_pda(__nmi_count, 1);
-#endif
+	inc_irq_stat(__nmi_count);
 
 	if (!ignore_nmis)
 		default_do_nmi(regs);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a5d8e1ace1cf..50a779264bb1 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -590,7 +590,8 @@ static void __init lguest_init_IRQ(void)
 		 * a straightforward 1 to 1 mapping, so force that here. */
 		__get_cpu_var(vector_irq)[vector] = i;
 		if (vector != SYSCALL_VECTOR) {
-			set_intr_gate(vector, interrupt[vector]);
+			set_intr_gate(vector,
+				      interrupt[vector-FIRST_EXTERNAL_VECTOR]);
 			set_irq_chip_and_handler_name(i, &lguest_irq_controller,
 						      handle_level_irq,
 						      "level");
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 9fd1f859021b..fee9e59649c1 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -64,14 +64,6 @@
 	name:
 #endif
 
-#define KPROBE_ENTRY(name) \
-  .pushsection .kprobes.text, "ax"; \
-  ENTRY(name)
-
-#define KPROBE_END(name) \
-  END(name);		 \
-  .popsection
-
 #ifndef END
 #define END(name) \
   .size name, .-name