From 020d86fc0df8b865f6dc168d88a7c2dccabd0a9e Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 12 Aug 2021 16:57:20 +0530 Subject: [PATCH 1/4] opp: Don't print an error if required-opps is missing The 'required-opps' property is considered optional, hence remove the pr_err() in of_parse_required_opp() when we find the property is missing. While at it, also fix the return value of of_get_required_opp_performance_state() when of_parse_required_opp() fails, return a -ENODEV instead of the -EINVAL. Signed-off-by: Rajendra Nayak Reviewed-by: Ulf Hansson Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/opp/of.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/opp/of.c b/drivers/opp/of.c index d298e38aaf7e..9bdabad11ca5 100644 --- a/drivers/opp/of.c +++ b/drivers/opp/of.c @@ -95,15 +95,7 @@ static struct dev_pm_opp *_find_opp_of_np(struct opp_table *opp_table, static struct device_node *of_parse_required_opp(struct device_node *np, int index) { - struct device_node *required_np; - - required_np = of_parse_phandle(np, "required-opps", index); - if (unlikely(!required_np)) { - pr_err("%s: Unable to parse required-opps: %pOF, index: %d\n", - __func__, np, index); - } - - return required_np; + return of_parse_phandle(np, "required-opps", index); } /* The caller must call dev_pm_opp_put_opp_table() after the table is used */ @@ -1327,7 +1319,7 @@ int of_get_required_opp_performance_state(struct device_node *np, int index) required_np = of_parse_required_opp(np, index); if (!required_np) - return -EINVAL; + return -ENODEV; opp_table = _find_table_of_opp_np(required_np); if (IS_ERR(opp_table)) { From c016baf7dc58e77acdedb2c75dac2b41b77bcf70 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 12 Aug 2021 16:57:21 +0530 Subject: [PATCH 2/4] PM: domains: Add support for 'required-opps' to set default perf state Some devices within power domains with performance states do not support DVFS, but still need to vote on a default/static state while they are active. They can express this using the 'required-opps' property in device tree, which points to the phandle of the OPP supported by the corresponding power-domains. Add support to parse this information from DT and then set the specified performance state during attach and drop it on detach. runtime suspend/resume callbacks already have logic to drop/set the vote as needed and should take care of dropping the default perf state vote on runtime suspend and restore it back on runtime resume. Signed-off-by: Rajendra Nayak Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 30 ++++++++++++++++++++++++++++-- include/linux/pm_domain.h | 1 + 2 files changed, 29 insertions(+), 2 deletions(-) diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index a934c679e6ce..e1c8994ae225 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2598,6 +2598,12 @@ static void genpd_dev_pm_detach(struct device *dev, bool power_off) dev_dbg(dev, "removing from PM domain %s\n", pd->name); + /* Drop the default performance state */ + if (dev_gpd_data(dev)->default_pstate) { + dev_pm_genpd_set_performance_state(dev, 0); + dev_gpd_data(dev)->default_pstate = 0; + } + for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) { ret = genpd_remove_device(pd, dev); if (ret != -EAGAIN) @@ -2637,6 +2643,7 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev, { struct of_phandle_args pd_args; struct generic_pm_domain *pd; + int pstate; int ret; ret = of_parse_phandle_with_args(dev->of_node, "power-domains", @@ -2675,10 +2682,29 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev, genpd_unlock(pd); } - if (ret) + if (ret) { genpd_remove_device(pd, dev); + return -EPROBE_DEFER; + } - return ret ? -EPROBE_DEFER : 1; + /* Set the default performance state */ + pstate = of_get_required_opp_performance_state(dev->of_node, index); + if (pstate < 0 && pstate != -ENODEV) { + ret = pstate; + goto err; + } else if (pstate > 0) { + ret = dev_pm_genpd_set_performance_state(dev, pstate); + if (ret) + goto err; + dev_gpd_data(dev)->default_pstate = pstate; + } + return 1; + +err: + dev_err(dev, "failed to set required performance state for power-domain %s: %d\n", + pd->name, ret); + genpd_remove_device(pd, dev); + return ret; } /** diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 21a0577305ef..67017c9390c8 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -198,6 +198,7 @@ struct generic_pm_domain_data { struct notifier_block *power_nb; int cpu; unsigned int performance_state; + unsigned int default_pstate; unsigned int rpm_pstate; ktime_t next_wakeup; void *data; From 80d4a82e1db819b33742c89917127f4c428e1c98 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 12 Aug 2021 16:57:22 +0530 Subject: [PATCH 3/4] arm64: dts: sc7180: Add required-opps for i2c qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 MHz) Though qup-i2c does not support DVFS, it still needs to vote for a performance state on 'CX' to satisfy the 19.2 Mhz clock frequency requirement. Use 'required-opps' to pass this information from device tree, and also add the power-domains property to specify the CX power-domain. Signed-off-by: Rajendra Nayak Reviewed-by: Stephen Boyd Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index a9a052f8c63c..e7f0e5cde424 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -786,6 +786,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -838,6 +840,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -890,6 +894,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -924,6 +930,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -976,6 +984,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1010,6 +1020,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1075,6 +1087,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1127,6 +1141,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1161,6 +1177,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1213,6 +1231,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1247,6 +1267,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1299,6 +1321,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; From 656164181eece68a2f99f0b8a1c5558184b67d7b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 24 Aug 2021 17:23:38 +0200 Subject: [PATCH 4/4] PM: domains: Fix domain attach for CONFIG_PM_OPP=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_PM_OPP=n, of_get_required_opp_performance_state() always returns -EOPNOTSUPP, and all drivers for devices that are part of a PM Domain fail to probe with: failed to set required performance state for power-domain foo: -95 probe of bar failed with error -95 Fix this by treating -EOPNOTSUPP the same as -ENODEV. Fixes: c016baf7dc58e77a ("PM: domains: Add support for 'required-opps' to set default perf state") Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index e1c8994ae225..adb41de68e0a 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2689,7 +2689,7 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev, /* Set the default performance state */ pstate = of_get_required_opp_performance_state(dev->of_node, index); - if (pstate < 0 && pstate != -ENODEV) { + if (pstate < 0 && pstate != -ENODEV && pstate != -EOPNOTSUPP) { ret = pstate; goto err; } else if (pstate > 0) {