[PATCH] pgdat allocation for new node add (specify node id)

Change the name of old add_memory() to arch_add_memory.  And use node id to
get pgdat for the node at NODE_DATA().

Note: Powerpc's old add_memory() is defined as __devinit. However,
      add_memory() is usually called only after bootup.
      I suppose it may be redundant. But, I'm not well known about powerpc.
      So, I keep it. (But, __meminit is better at least.)

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/i386/mm/init.c

@@ -654,7 +654,7 @@ void __init mem_init(void)
  */
 #ifdef CONFIG_MEMORY_HOTPLUG
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-int add_memory(u64 start, u64 size)
+int arch_add_memory(int nid, u64 start, u64 size)
 {
 	struct pglist_data *pgdata = &contig_page_data;
 	struct zone *zone = pgdata->node_zones + MAX_NR_ZONES-1;

arch/ia64/mm/init.c

@@ -652,7 +652,7 @@ void online_page(struct page *page)
 	num_physpages++;
 }
 
-int add_memory(u64 start, u64 size)
+int arch_add_memory(int nid, u64 start, u64 size)
 {
 	pg_data_t *pgdat;
 	struct zone *zone;
@@ -660,7 +660,7 @@ int add_memory(u64 start, u64 size)
 	unsigned long nr_pages = size >> PAGE_SHIFT;
 	int ret;
 
-	pgdat = NODE_DATA(0);
+	pgdat = NODE_DATA(nid);
 
 	zone = pgdat->node_zones + ZONE_NORMAL;
 	ret = __add_pages(zone, start_pfn, nr_pages);
@@ -671,7 +671,6 @@ int add_memory(u64 start, u64 size)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(add_memory);
 
 int remove_memory(u64 start, u64 size)
 {

arch/powerpc/mm/mem.c

@@ -114,15 +114,20 @@ void online_page(struct page *page)
 	num_physpages++;
 }
 
-int __devinit add_memory(u64 start, u64 size)
+#ifdef CONFIG_NUMA
+int memory_add_physaddr_to_nid(u64 start)
+{
+	return hot_add_scn_to_nid(start);
+}
+#endif
+
+int __devinit arch_add_memory(int nid, u64 start, u64 size)
 {
 	struct pglist_data *pgdata;
 	struct zone *zone;
-	int nid;
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
 
-	nid = hot_add_scn_to_nid(start);
 	pgdata = NODE_DATA(nid);
 
 	start = (unsigned long)__va(start);

arch/x86_64/mm/init.c

@@ -506,8 +506,6 @@ void __init clear_kernel_mapping(unsigned long address, unsigned long size)
 /*
  * Memory hotplug specific functions
  */
-#if defined(CONFIG_ACPI_HOTPLUG_MEMORY) || defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)
-
 void online_page(struct page *page)
 {
 	ClearPageReserved(page);
@@ -517,7 +515,52 @@ void online_page(struct page *page)
 	num_physpages++;
 }
 
-#ifndef CONFIG_MEMORY_HOTPLUG
+#ifdef CONFIG_MEMORY_HOTPLUG
+/*
+ * XXX: memory_add_physaddr_to_nid() is to find node id from physical address
+ *	via probe interface of sysfs. If acpi notifies hot-add event, then it
+ *	can tell node id by searching dsdt. But, probe interface doesn't have
+ *	node id. So, return 0 as node id at this time.
+ */
+#ifdef CONFIG_NUMA
+int memory_add_physaddr_to_nid(u64 start)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Memory is added always to NORMAL zone. This means you will never get
+ * additional DMA/DMA32 memory.
+ */
+int arch_add_memory(int nid, u64 start, u64 size)
+{
+	struct pglist_data *pgdat = NODE_DATA(nid);
+	struct zone *zone = pgdat->node_zones + MAX_NR_ZONES-2;
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+	int ret;
+
+	ret = __add_pages(zone, start_pfn, nr_pages);
+	if (ret)
+		goto error;
+
+	init_memory_mapping(start, (start + size -1));
+
+	return ret;
+error:
+	printk("%s: Problem encountered in __add_pages!\n", __func__);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(arch_add_memory);
+
+int remove_memory(u64 start, u64 size)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(remove_memory);
+
+#else /* CONFIG_MEMORY_HOTPLUG */
 /*
  * Memory Hotadd without sparsemem. The mem_maps have been allocated in advance,
  * just online the pages.
@@ -543,40 +586,7 @@ int __add_pages(struct zone *z, unsigned long start_pfn, unsigned long nr_pages)
 	}
 	return err;
 }
-#endif
-
-/*
- * Memory is added always to NORMAL zone. This means you will never get
- * additional DMA/DMA32 memory.
- */
-int add_memory(u64 start, u64 size)
-{
-	struct pglist_data *pgdat = NODE_DATA(0);
-	struct zone *zone = pgdat->node_zones + MAX_NR_ZONES-2;
-	unsigned long start_pfn = start >> PAGE_SHIFT;
-	unsigned long nr_pages = size >> PAGE_SHIFT;
-	int ret;
-
-	ret = __add_pages(zone, start_pfn, nr_pages);
-	if (ret)
-		goto error;
-
-	init_memory_mapping(start, (start + size -1));
-
-	return ret;
-error:
-	printk("%s: Problem encountered in __add_pages!\n", __func__);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(add_memory);
-
-int remove_memory(u64 start, u64 size)
-{
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(remove_memory);
-
-#endif
+#endif /* CONFIG_MEMORY_HOTPLUG */
 
 static struct kcore_list kcore_mem, kcore_vmalloc, kcore_kernel, kcore_modules,
 			 kcore_vsyscall;

drivers/acpi/Kconfig

@@ -328,7 +328,7 @@ config ACPI_CONTAINER
 config ACPI_HOTPLUG_MEMORY
 	tristate "Memory Hotplug"
 	depends on ACPI
-	depends on MEMORY_HOTPLUG || X86_64
+	depends on MEMORY_HOTPLUG
 	default n
 	help
 	  This driver adds supports for ACPI Memory Hotplug.  This driver

drivers/acpi/acpi_memhotplug.c

@@ -215,6 +215,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 {
 	int result, num_enabled = 0;
 	struct acpi_memory_info *info;
+	int node = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_memory_enable_device");
 
@@ -245,7 +246,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 			continue;
 		}
 
-		result = add_memory(info->start_addr, info->length);
+		result = add_memory(node, info->start_addr, info->length);
 		if (result)
 			continue;
 		info->enabled = 1;

drivers/base/memory.c

@@ -306,11 +306,13 @@ static ssize_t
 memory_probe_store(struct class *class, const char *buf, size_t count)
 {
 	u64 phys_addr;
+	int nid;
 	int ret;
 
 	phys_addr = simple_strtoull(buf, NULL, 0);
 
-	ret = add_memory(phys_addr, PAGES_PER_SECTION << PAGE_SHIFT);
+	nid = memory_add_physaddr_to_nid(phys_addr);
+	ret = add_memory(nid, phys_addr, PAGES_PER_SECTION << PAGE_SHIFT);
 
 	if (ret)
 		count = ret;

include/linux/memory_hotplug.h

@@ -63,6 +63,16 @@ extern int online_pages(unsigned long, unsigned long);
 /* reasonably generic interface to expand the physical pages in a zone  */
 extern int __add_pages(struct zone *zone, unsigned long start_pfn,
 	unsigned long nr_pages);
+
+#ifdef CONFIG_NUMA
+extern int memory_add_physaddr_to_nid(u64 start);
+#else
+static inline int memory_add_physaddr_to_nid(u64 start)
+{
+	return 0;
+}
+#endif
+
 #else /* ! CONFIG_MEMORY_HOTPLUG */
 /*
  * Stub functions for when hotplug is off
@@ -99,7 +109,8 @@ static inline int __remove_pages(struct zone *zone, unsigned long start_pfn,
 	return -ENOSYS;
 }
 
-extern int add_memory(u64 start, u64 size);
+extern int add_memory(int nid, u64 start, u64 size);
+extern int arch_add_memory(int nid, u64 start, u64 size);
 extern int remove_memory(u64 start, u64 size);
 
 #endif /* __LINUX_MEMORY_HOTPLUG_H */

mm/memory_hotplug.c

@@ -163,3 +163,14 @@ int online_pages(unsigned long pfn, unsigned long nr_pages)
 	vm_total_pages = nr_free_pagecache_pages();
 	return 0;
 }
+
+int add_memory(int nid, u64 start, u64 size)
+{
+	int ret;
+
+	/* call arch's memory hotadd */
+	ret = arch_add_memory(nid, start, size);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(add_memory);