Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-10 14:11:52 +00:00
Code Issues Packages Projects Releases Wiki Activity

LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS

Browse Source 
Add driver for BlinkM device to drivers/leds/.
Add entry to MAINTAINERS file.
Add documentation in Documentation/leds/.

A BlinkM is a RGB LED controlled through I2C.

This driver implements an interface to the LED framework
and another sysfs group to access the internal options
of the BlinkM.

rev6: Use module_i2c_driver().
rev5: Removed own workqueue in favor of events wq.
rev4: Fixed comments by Bryan Wu.
rev3: Fixed issues found by Jonathan Neuschäfer.

(bryan.wu@canonical.com: remove 2 trailing whitespace)

Signed-off-by: Jan-Simon Möller <jansimon.moeller@gmx.de>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
This commit is contained in:
Jan-Simon Möller 2012-07-20 16:49:06 +08:00 committed by Bryan Wu
parent eb18618b80
commit b54cf35a7f
5 changed files with 906 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

80
Documentation/leds/leds-blinkm.txt Normal file
View File

@ -0,0 +1,80 @@
The leds-blinkm driver supports the devices of the BlinkM family.
They are RGB-LED modules driven by a (AT)tiny microcontroller and
communicate through I2C. The default address of these modules is
0x09 but this can be changed through a command. By this you could
dasy-chain up to 127 BlinkMs on an I2C bus.
The device accepts RGB and HSB color values through separate commands.
Also you can store blinking sequences as "scripts" in
the controller and run them. Also fading is an option.
The interface this driver provides is 2-fold:
a) LED class interface for use with triggers
############################################
The registration follows the scheme:
blinkm-<i2c-bus-nr>-<i2c-device-nr>-<color>
$ ls -h /sys/class/leds/blinkm-6-*
/sys/class/leds/blinkm-6-9-blue:
brightness device max_brightness power subsystem trigger uevent
/sys/class/leds/blinkm-6-9-green:
brightness device max_brightness power subsystem trigger uevent
/sys/class/leds/blinkm-6-9-red:
brightness device max_brightness power subsystem trigger uevent
(same is /sys/bus/i2c/devices/6-0009/leds)
We can control the colors separated into red, green and blue and
assign triggers on each color.
E.g.:
$ cat blinkm-6-9-blue/brightness
05
$ echo 200 > blinkm-6-9-blue/brightness
$
$ modprobe ledtrig-heartbeat
$ echo heartbeat > blinkm-6-9-green/trigger
$
b) Sysfs group to control rgb, fade, hsb, scripts ...
#####################################################
This extended interface is available as folder blinkm
in the sysfs folder of the I2C device.
E.g. below /sys/bus/i2c/devices/6-0009/blinkm
$ ls -h /sys/bus/i2c/devices/6-0009/blinkm/
blue green red test
Currently supported is just setting red, green, blue
and a test sequence.
E.g.:
$ cat *
00
00
00
#Write into test to start test sequence!#
$ echo 1 > test
$
$ echo 255 > red
$
as of 6/2012
dl9pf <at> gmx <dot> de

5
MAINTAINERS
View File

@ -1518,6 +1518,11 @@ W: http://blackfin.uclinux.org/
S: Supported S: Supported
F: drivers/i2c/busses/i2c-bfin-twi.c F: drivers/i2c/busses/i2c-bfin-twi.c
BLINKM RGB LED DRIVER
M: Jan-Simon Moeller <jansimon.moeller@gmx.de>
S: Maintained
F: drivers/leds/leds-blinkm.c
BLOCK LAYER BLOCK LAYER
M: Jens Axboe <axboe@kernel.dk> M: Jens Axboe <axboe@kernel.dk>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git

8
drivers/leds/Kconfig
View File

@ -430,6 +430,14 @@ config LEDS_OT200
This option enables support for the LEDs on the Bachmann OT200. This option enables support for the LEDs on the Bachmann OT200.
Say Y to enable LEDs on the Bachmann OT200. Say Y to enable LEDs on the Bachmann OT200.
config LEDS_BLINKM
tristate "LED support for the BlinkM I2C RGB LED"
depends on LEDS_CLASS
depends on I2C
help
This option enables support for the BlinkM RGB LED connected
through I2C. Say Y to enable support for the BlinkM LED.
config LEDS_TRIGGERS config LEDS_TRIGGERS
bool "LED Trigger support" bool "LED Trigger support"
depends on LEDS_CLASS depends on LEDS_CLASS

1
drivers/leds/Makefile
View File

@ -48,6 +48,7 @@ obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
obj-$(CONFIG_LEDS_LM3556) += leds-lm3556.o obj-$(CONFIG_LEDS_LM3556) += leds-lm3556.o
obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
# LED SPI Drivers # LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o

812
drivers/leds/leds-blinkm.c Normal file
View File

@ -0,0 +1,812 @@
/*
* leds-blinkm.c
* (c) Jan-Simon Möller (dl9pf@gmx.de)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/printk.h>
#include <linux/pm_runtime.h>
#include <linux/leds.h>
#include <linux/delay.h>
/* Addresses to scan - BlinkM is on 0x09 by default*/
static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
static int blinkm_test_run(struct i2c_client *client);
struct blinkm_led {
struct i2c_client *i2c_client;
struct led_classdev led_cdev;
int id;
atomic_t active;
};
struct blinkm_work {
struct blinkm_led *blinkm_led;
struct work_struct work;
};
#define cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev)
#define work_to_blmwork(c) container_of(c, struct blinkm_work, work)
struct blinkm_data {
struct i2c_client *i2c_client;
struct mutex update_lock;
/* used for led class interface */
struct blinkm_led blinkm_leds[3];
/* used for "blinkm" sysfs interface */
u8 red; /* color red */
u8 green; /* color green */
u8 blue; /* color blue */
/* next values to use for transfer */
u8 next_red; /* color red */
u8 next_green; /* color green */
u8 next_blue; /* color blue */
/* internal use */
u8 args[7]; /* set of args for transmission */
u8 i2c_addr; /* i2c addr */
u8 fw_ver; /* firmware version */
/* used, but not from userspace */
u8 hue; /* HSB hue */
u8 saturation; /* HSB saturation */
u8 brightness; /* HSB brightness */
u8 next_hue; /* HSB hue */
u8 next_saturation; /* HSB saturation */
u8 next_brightness; /* HSB brightness */
/* currently unused / todo */
u8 fade_speed; /* fade speed 1 - 255 */
s8 time_adjust; /* time adjust -128 - 127 */
u8 fade:1; /* fade on = 1, off = 0 */
u8 rand:1; /* rand fade mode on = 1 */
u8 script_id; /* script ID */
u8 script_repeats; /* repeats of script */
u8 script_startline; /* line to start */
};
/* Colors */
#define RED 0
#define GREEN 1
#define BLUE 2
/* mapping command names to cmd chars - see datasheet */
#define BLM_GO_RGB 0
#define BLM_FADE_RGB 1
#define BLM_FADE_HSB 2
#define BLM_FADE_RAND_RGB 3
#define BLM_FADE_RAND_HSB 4
#define BLM_PLAY_SCRIPT 5
#define BLM_STOP_SCRIPT 6
#define BLM_SET_FADE_SPEED 7
#define BLM_SET_TIME_ADJ 8
#define BLM_GET_CUR_RGB 9
#define BLM_WRITE_SCRIPT_LINE 10
#define BLM_READ_SCRIPT_LINE 11
#define BLM_SET_SCRIPT_LR 12 /* Length & Repeats */
#define BLM_SET_ADDR 13
#define BLM_GET_ADDR 14
#define BLM_GET_FW_VER 15
#define BLM_SET_STARTUP_PARAM 16
/* BlinkM Commands
* as extracted out of the datasheet:
*
* cmdchar = command (ascii)
* cmdbyte = command in hex
* nr_args = number of arguments (to send)
* nr_ret = number of return values (to read)
* dir = direction (0 = read, 1 = write, 2 = both)
*
*/
static const struct {
char cmdchar;
u8 cmdbyte;
u8 nr_args;
u8 nr_ret;
u8 dir:2;
} blinkm_cmds[17] = {
/* cmdchar, cmdbyte, nr_args, nr_ret, dir */
{ 'n', 0x6e, 3, 0, 1},
{ 'c', 0x63, 3, 0, 1},
{ 'h', 0x68, 3, 0, 1},
{ 'C', 0x43, 3, 0, 1},
{ 'H', 0x48, 3, 0, 1},
{ 'p', 0x70, 3, 0, 1},
{ 'o', 0x6f, 0, 0, 1},
{ 'f', 0x66, 1, 0, 1},
{ 't', 0x74, 1, 0, 1},
{ 'g', 0x67, 0, 3, 0},
{ 'W', 0x57, 7, 0, 1},
{ 'R', 0x52, 2, 5, 2},
{ 'L', 0x4c, 3, 0, 1},
{ 'A', 0x41, 4, 0, 1},
{ 'a', 0x61, 0, 1, 0},
{ 'Z', 0x5a, 0, 1, 0},
{ 'B', 0x42, 5, 0, 1},
};
static ssize_t show_color_common(struct device *dev, char *buf, int color)
{
struct i2c_client *client;
struct blinkm_data *data;
int ret;
client = to_i2c_client(dev);
data = i2c_get_clientdata(client);
ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB);
if (ret < 0)
return ret;
switch (color) {
case RED:
return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red);
break;
case GREEN:
return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green);
break;
case BLUE:
return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue);
break;
default:
return -EINVAL;
}
return -EINVAL;
}
static int store_color_common(struct device *dev, const char *buf, int color)
{
struct i2c_client *client;
struct blinkm_data *data;
int ret;
u8 value;
client = to_i2c_client(dev);
data = i2c_get_clientdata(client);
ret = kstrtou8(buf, 10, &value);
if (ret < 0) {
dev_err(dev, "BlinkM: value too large!\n");
return ret;
}
switch (color) {
case RED:
data->next_red = value;
break;
case GREEN:
data->next_green = value;
break;
case BLUE:
data->next_blue = value;
break;
default:
return -EINVAL;
}
dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n",
data->next_red, data->next_green, data->next_blue);
/* if mode ... */
ret = blinkm_transfer_hw(client, BLM_GO_RGB);
if (ret < 0) {
dev_err(dev, "BlinkM: can't set RGB\n");
return ret;
}
return 0;
}
static ssize_t show_red(struct device *dev, struct device_attribute *attr,
char *buf)
{
return show_color_common(dev, buf, RED);
}
static ssize_t store_red(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
ret = store_color_common(dev, buf, RED);
if (ret < 0)
return ret;
return count;
}
static DEVICE_ATTR(red, S_IRUGO | S_IWUSR, show_red, store_red);
static ssize_t show_green(struct device *dev, struct device_attribute *attr,
char *buf)
{
return show_color_common(dev, buf, GREEN);
}
static ssize_t store_green(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
ret = store_color_common(dev, buf, GREEN);
if (ret < 0)
return ret;
return count;
}
static DEVICE_ATTR(green, S_IRUGO | S_IWUSR, show_green, store_green);
static ssize_t show_blue(struct device *dev, struct device_attribute *attr,
char *buf)
{
return show_color_common(dev, buf, BLUE);
}
static ssize_t store_blue(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
ret = store_color_common(dev, buf, BLUE);
if (ret < 0)
return ret;
return count;
}
static DEVICE_ATTR(blue, S_IRUGO | S_IWUSR, show_blue, store_blue);
static ssize_t show_test(struct device *dev, struct device_attribute *attr,
char *buf)
{
return scnprintf(buf, PAGE_SIZE,
"#Write into test to start test sequence!#\n");
}
static ssize_t store_test(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client;
int ret;
client = to_i2c_client(dev);
/*test */
ret = blinkm_test_run(client);
if (ret < 0)
return ret;
return count;
}
static DEVICE_ATTR(test, S_IRUGO | S_IWUSR, show_test, store_test);
/* TODO: HSB, fade, timeadj, script ... */
static struct attribute *blinkm_attrs[] = {
&dev_attr_red.attr,
&dev_attr_green.attr,
&dev_attr_blue.attr,
&dev_attr_test.attr,
NULL,
};
static struct attribute_group blinkm_group = {
.name = "blinkm",
.attrs = blinkm_attrs,
};
static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg)
{
int result;
int i;
int arglen = blinkm_cmds[cmd].nr_args;
/* write out cmd to blinkm - always / default step */
result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte);
if (result < 0)
return result;
/* no args to write out */
if (arglen == 0)
return 0;
for (i = 0; i < arglen; i++) {
/* repeat for arglen */
result = i2c_smbus_write_byte(client, arg[i]);
if (result < 0)
return result;
}
return 0;
}
static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg)
{
int result;
int i;
int retlen = blinkm_cmds[cmd].nr_ret;
for (i = 0; i < retlen; i++) {
/* repeat for retlen */
result = i2c_smbus_read_byte(client);
if (result < 0)
return result;
arg[i] = result;
}
return 0;
}
static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
{
/* the protocol is simple but non-standard:
* e.g. cmd 'g' (= 0x67) for "get device address"
* - which defaults to 0x09 - would be the sequence:
* a) write 0x67 to the device (byte write)
* b) read the value (0x09) back right after (byte read)
*
* Watch out for "unfinished" sequences (i.e. not enough reads
* or writes after a command. It will make the blinkM misbehave.
* Sequence is key here.
*/
/* args / return are in private data struct */
struct blinkm_data *data = i2c_get_clientdata(client);
/* We start hardware transfers which are not to be
* mixed with other commands. Aquire a lock now. */
if (mutex_lock_interruptible(&data->update_lock) < 0)
return -EAGAIN;
/* switch cmd - usually write before reads */
switch (cmd) {
case BLM_FADE_RAND_RGB:
case BLM_GO_RGB:
case BLM_FADE_RGB:
data->args[0] = data->next_red;
data->args[1] = data->next_green;
data->args[2] = data->next_blue;
blinkm_write(client, cmd, data->args);
data->red = data->args[0];
data->green = data->args[1];
data->blue = data->args[2];
break;
case BLM_FADE_HSB:
case BLM_FADE_RAND_HSB:
data->args[0] = data->next_hue;
data->args[1] = data->next_saturation;
data->args[2] = data->next_brightness;
blinkm_write(client, cmd, data->args);
data->hue = data->next_hue;
data->saturation = data->next_saturation;
data->brightness = data->next_brightness;
break;
case BLM_PLAY_SCRIPT:
data->args[0] = data->script_id;
data->args[1] = data->script_repeats;
data->args[2] = data->script_startline;
blinkm_write(client, cmd, data->args);
break;
case BLM_STOP_SCRIPT:
blinkm_write(client, cmd, NULL);
break;
case BLM_GET_CUR_RGB:
data->args[0] = data->red;
data->args[1] = data->green;
data->args[2] = data->blue;
blinkm_write(client, cmd, NULL);
blinkm_read(client, cmd, data->args);
data->red = data->args[0];
data->green = data->args[1];
data->blue = data->args[2];
break;
case BLM_GET_ADDR:
data->args[0] = data->i2c_addr;
blinkm_write(client, cmd, NULL);
blinkm_read(client, cmd, data->args);
data->i2c_addr = data->args[0];
break;
case BLM_SET_TIME_ADJ:
case BLM_SET_FADE_SPEED:
case BLM_READ_SCRIPT_LINE:
case BLM_WRITE_SCRIPT_LINE:
case BLM_SET_SCRIPT_LR:
case BLM_SET_ADDR:
case BLM_GET_FW_VER:
case BLM_SET_STARTUP_PARAM:
dev_err(&client->dev,
"BlinkM: cmd %d not implemented yet.\n", cmd);
break;
default:
dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd);
mutex_unlock(&data->update_lock);
return -EINVAL;
} /* end switch(cmd) */
/* transfers done, unlock */
mutex_unlock(&data->update_lock);
return 0;
}
static void led_work(struct work_struct *work)
{
int ret;
struct blinkm_led *led;
struct blinkm_data *data ;
struct blinkm_work *blm_work = work_to_blmwork(work);
led = blm_work->blinkm_led;
data = i2c_get_clientdata(led->i2c_client);
ret = blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
atomic_dec(&led->active);
dev_dbg(&led->i2c_client->dev,
"# DONE # next_red = %d, next_green = %d,"
" next_blue = %d, active = %d\n",
data->next_red, data->next_green,
data->next_blue, atomic_read(&led->active));
kfree(blm_work);
}
static int blinkm_led_common_set(struct led_classdev *led_cdev,
enum led_brightness value, int color)
{
/* led_brightness is 0, 127 or 255 - we just use it here as-is */
struct blinkm_led *led = cdev_to_blmled(led_cdev);
struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
struct blinkm_work *bl_work = kzalloc(sizeof(struct blinkm_work),
GFP_ATOMIC);
switch (color) {
case RED:
/* bail out if there's no change */
if (data->next_red == (u8) value)
return 0;
/* we assume a quite fast sequence here ([off]->on->off)
* think of network led trigger - we cannot blink that fast, so
* in case we already have a off->on->off transition queued up,
* we refuse to queue up more.
* Revisit: fast-changing brightness. */
if (atomic_read(&led->active) > 1)
return 0;
data->next_red = (u8) value;
break;
case GREEN:
/* bail out if there's no change */
if (data->next_green == (u8) value)
return 0;
/* we assume a quite fast sequence here ([off]->on->off)
* Revisit: fast-changing brightness. */
if (atomic_read(&led->active) > 1)
return 0;
data->next_green = (u8) value;
break;
case BLUE:
/* bail out if there's no change */
if (data->next_blue == (u8) value)
return 0;
/* we assume a quite fast sequence here ([off]->on->off)
* Revisit: fast-changing brightness. */
if (atomic_read(&led->active) > 1)
return 0;
data->next_blue = (u8) value;
break;
default:
dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n");
return -EINVAL;
}
atomic_inc(&led->active);
dev_dbg(&led->i2c_client->dev,
"#TO_SCHED# next_red = %d, next_green = %d,"
" next_blue = %d, active = %d\n",
data->next_red, data->next_green,
data->next_blue, atomic_read(&led->active));
/* a fresh work _item_ for each change */
bl_work->blinkm_led = led;
INIT_WORK(&bl_work->work, led_work);
/* queue work in own queue for easy sync on exit*/
schedule_work(&bl_work->work);
return 0;
}
static void blinkm_led_red_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
blinkm_led_common_set(led_cdev, value, RED);
}
static void blinkm_led_green_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
blinkm_led_common_set(led_cdev, value, GREEN);
}
static void blinkm_led_blue_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
blinkm_led_common_set(led_cdev, value, BLUE);
}
static void blinkm_init_hw(struct i2c_client *client)
{
int ret;
ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT);
ret = blinkm_transfer_hw(client, BLM_GO_RGB);
}
static int blinkm_test_run(struct i2c_client *client)
{
int ret;
struct blinkm_data *data = i2c_get_clientdata(client);
data->next_red = 0x01;
data->next_green = 0x05;
data->next_blue = 0x10;
ret = blinkm_transfer_hw(client, BLM_GO_RGB);
if (ret < 0)
return ret;
msleep(2000);
data->next_red = 0x25;
data->next_green = 0x10;
data->next_blue = 0x31;
ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
if (ret < 0)
return ret;
msleep(2000);
data->next_hue = 0x50;
data->next_saturation = 0x10;
data->next_brightness = 0x20;
ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
if (ret < 0)
return ret;
msleep(2000);
return 0;
}
/* Return 0 if detection is successful, -ENODEV otherwise */
static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
int ret;
int count = 99;
u8 tmpargs[7];
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_WORD_DATA
| I2C_FUNC_SMBUS_WRITE_BYTE))
return -ENODEV;
/* Now, we do the remaining detection. Simple for now. */
/* We might need more guards to protect other i2c slaves */
/* make sure the blinkM is balanced (read/writes) */
while (count > 0) {
ret = blinkm_write(client, BLM_GET_ADDR, NULL);
usleep_range(5000, 10000);
ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
usleep_range(5000, 10000);
if (tmpargs[0] == 0x09)
count = 0;
count--;
}
/* Step 1: Read BlinkM address back - cmd_char 'a' */
ret = blinkm_write(client, BLM_GET_ADDR, NULL);
if (ret < 0)
return -ENODEV;
usleep_range(20000, 30000); /* allow a small delay */
ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
if (ret < 0)
return -ENODEV;
if (tmpargs[0] != 0x09) {
dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]);
return -ENODEV;
}
strlcpy(info->type, "blinkm", I2C_NAME_SIZE);
return 0;
}
static int __devinit blinkm_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct blinkm_data *data;
struct blinkm_led *led[3];
int err, i;
char blinkm_led_name[28];
data = devm_kzalloc(&client->dev,
sizeof(struct blinkm_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
data->i2c_addr = 0x09;
data->i2c_addr = 0x08;
/* i2c addr - use fake addr of 0x08 initially (real is 0x09) */
data->fw_ver = 0xfe;
/* firmware version - use fake until we read real value
* (currently broken - BlinkM confused!) */
data->script_id = 0x01;
data->i2c_client = client;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
/* Register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &blinkm_group);
if (err < 0) {
dev_err(&client->dev, "couldn't register sysfs group\n");
goto exit;
}
for (i = 0; i < 3; i++) {
/* RED = 0, GREEN = 1, BLUE = 2 */
led[i] = &data->blinkm_leds[i];
led[i]->i2c_client = client;
led[i]->id = i;
led[i]->led_cdev.max_brightness = 255;
led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
atomic_set(&led[i]->active, 0);
switch (i) {
case RED:
snprintf(blinkm_led_name, sizeof(blinkm_led_name),
"blinkm-%d-%d-red",
client->adapter->nr,
client->addr);
led[i]->led_cdev.name = blinkm_led_name;
led[i]->led_cdev.brightness_set = blinkm_led_red_set;
err = led_classdev_register(&client->dev,
&led[i]->led_cdev);
if (err < 0) {
dev_err(&client->dev,
"couldn't register LED %s\n",
led[i]->led_cdev.name);
goto failred;
}
break;
case GREEN:
snprintf(blinkm_led_name, sizeof(blinkm_led_name),
"blinkm-%d-%d-green",
client->adapter->nr,
client->addr);
led[i]->led_cdev.name = blinkm_led_name;
led[i]->led_cdev.brightness_set = blinkm_led_green_set;
err = led_classdev_register(&client->dev,
&led[i]->led_cdev);
if (err < 0) {
dev_err(&client->dev,
"couldn't register LED %s\n",
led[i]->led_cdev.name);
goto failgreen;
}
break;
case BLUE:
snprintf(blinkm_led_name, sizeof(blinkm_led_name),
"blinkm-%d-%d-blue",
client->adapter->nr,
client->addr);
led[i]->led_cdev.name = blinkm_led_name;
led[i]->led_cdev.brightness_set = blinkm_led_blue_set;
err = led_classdev_register(&client->dev,
&led[i]->led_cdev);
if (err < 0) {
dev_err(&client->dev,
"couldn't register LED %s\n",
led[i]->led_cdev.name);
goto failblue;
}
break;
} /* end switch */
} /* end for */
/* Initialize the blinkm */
blinkm_init_hw(client);
return 0;
failblue:
led_classdev_unregister(&led[GREEN]->led_cdev);
failgreen:
led_classdev_unregister(&led[RED]->led_cdev);
failred:
sysfs_remove_group(&client->dev.kobj, &blinkm_group);
exit:
return err;
}
static int __devexit blinkm_remove(struct i2c_client *client)
{
struct blinkm_data *data = i2c_get_clientdata(client);
int ret = 0;
int i;
/* make sure no workqueue entries are pending */
for (i = 0; i < 3; i++) {
flush_scheduled_work();
led_classdev_unregister(&data->blinkm_leds[i].led_cdev);
}
/* reset rgb */
data->next_red = 0x00;
data->next_green = 0x00;
data->next_blue = 0x00;
ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
if (ret < 0)
dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
/* reset hsb */
data->next_hue = 0x00;
data->next_saturation = 0x00;
data->next_brightness = 0x00;
ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
if (ret < 0)
dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
/* red fade to off */
data->next_red = 0xff;
ret = blinkm_transfer_hw(client, BLM_GO_RGB);
if (ret < 0)
dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
/* off */
data->next_red = 0x00;
ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
if (ret < 0)
dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
sysfs_remove_group(&client->dev.kobj, &blinkm_group);
return 0;
}
static const struct i2c_device_id blinkm_id[] = {
{"blinkm", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, blinkm_id);
/* This is the driver that will be inserted */
static struct i2c_driver blinkm_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "blinkm",
},
.probe = blinkm_probe,
.remove = __devexit_p(blinkm_remove),
.id_table = blinkm_id,
.detect = blinkm_detect,
.address_list = normal_i2c,
};
module_i2c_driver(blinkm_driver);
MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>");
MODULE_DESCRIPTION("BlinkM RGB LED driver");
MODULE_LICENSE("GPL");