mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 06:31:49 +00:00
ALSA: firewire-motu: add support for MOTU 896
MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
parent
d13d6b284d
commit
b431f16f16
@ -166,6 +166,7 @@ config SND_FIREWIRE_MOTU
|
||||
help
|
||||
Say Y here to enable support for FireWire devices which MOTU produced:
|
||||
* 828
|
||||
* 896
|
||||
* 828mk2
|
||||
* Traveler
|
||||
* Ultralite
|
||||
|
@ -53,6 +53,62 @@
|
||||
#define CLK_828_STATUS_FLAG_SRC_SPDIF_ON_OPT_OR_COAX 0x00000002
|
||||
#define CLK_828_STATUS_FLAG_SRC_ADAT_ON_OPT_OR_DSUB 0x00000001
|
||||
|
||||
// Status register for MOTU 896 (0x'ffff'f000'0b14).
|
||||
//
|
||||
// 0x20000000: fetch PCM frames from communication IC to DAC.
|
||||
// 0x08000000: speed of word clock signal output on BNC interface.
|
||||
// 0x00000000: follow to system clock.
|
||||
// 0x08000000: half of system clock.
|
||||
// 0x01000000: Route main output to headphone output.
|
||||
// 0x00ffff00: input to monitor.
|
||||
// 0x00000000: none
|
||||
// 0x00004800: analog-1/2
|
||||
// 0x00005a00: analog-3/4
|
||||
// 0x00006c00: analog-5/6
|
||||
// 0x00007e00: analog-7/8
|
||||
// 0x00104800: AES/EBU-1/2
|
||||
// 0x00004000: analog-1
|
||||
// 0x00004900: analog-2
|
||||
// 0x00005200: analog-3
|
||||
// 0x00005b00: analog-4
|
||||
// 0x00006400: analog-5
|
||||
// 0x00006d00: analog-6
|
||||
// 0x00007600: analog-7
|
||||
// 0x00007f00: analog-8
|
||||
// 0x00104000: AES/EBU-1
|
||||
// 0x00104900: AES/EBU-2
|
||||
// 0x00000060: sample rate conversin for AES/EBU input/output.
|
||||
// 0x00000000: None
|
||||
// 0x00000020: input signal is converted to system rate
|
||||
// 0x00000040: output is slave to input, ignoring system rate
|
||||
// 0x00000060: output is double rate than system rate
|
||||
// 0x00000018: nominal rate of sampling clock.
|
||||
// 0x00000000: 44.1 kHz
|
||||
// 0x00000008: 48.0 kHz
|
||||
// 0x00000010: 88.2 kHz
|
||||
// 0x00000018: 96.0 kHz
|
||||
// 0x00000007: source of sampling clock.
|
||||
// 0x00000000: internal
|
||||
// 0x00000001: ADAT on optical interface
|
||||
// 0x00000002: AES/EBU on XLR
|
||||
// 0x00000004: word clock on BNC
|
||||
// 0x00000005: ADAT on Dsub 9pin
|
||||
|
||||
#define CLK_896_STATUS_OFFSET 0x0b14
|
||||
#define CLK_896_STATUS_FLAG_FETCH_ENABLE 0x20000000
|
||||
#define CLK_896_STATUS_FLAG_MAIN_TO_HP 0x01000000
|
||||
#define CLK_896_STATUS_MASK_SRC 0x00000007
|
||||
#define CLK_896_STATUS_FLAG_SRC_INTERNAL 0x00000000
|
||||
#define CLK_896_STATUS_FLAG_SRC_ADAT_ON_OPT 0x00000001
|
||||
#define CLK_896_STATUS_FLAG_SRC_AESEBU 0x00000002
|
||||
#define CLK_896_STATUS_FLAG_SRC_WORD 0x00000004
|
||||
#define CLK_896_STATUS_FLAG_SRC_ADAT_ON_DSUB 0x00000005
|
||||
#define CLK_896_STATUS_MASK_RATE 0x00000018
|
||||
#define CLK_896_STATUS_FLAG_RATE_44100 0x00000000
|
||||
#define CLK_896_STATUS_FLAG_RATE_48000 0x00000008
|
||||
#define CLK_896_STATUS_FLAG_RATE_88200 0x00000010
|
||||
#define CLK_896_STATUS_FLAG_RATE_96000 0x00000018
|
||||
|
||||
static void parse_clock_rate_828(u32 data, unsigned int *rate)
|
||||
{
|
||||
if (data & CLK_828_STATUS_FLAG_RATE_48000)
|
||||
@ -74,10 +130,45 @@ static int get_clock_rate_828(struct snd_motu *motu, unsigned int *rate)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int parse_clock_rate_896(u32 data, unsigned int *rate)
|
||||
{
|
||||
switch (data & CLK_896_STATUS_MASK_RATE) {
|
||||
case CLK_896_STATUS_FLAG_RATE_44100:
|
||||
*rate = 44100;
|
||||
break;
|
||||
case CLK_896_STATUS_FLAG_RATE_48000:
|
||||
*rate = 48000;
|
||||
break;
|
||||
case CLK_896_STATUS_FLAG_RATE_88200:
|
||||
*rate = 88200;
|
||||
break;
|
||||
case CLK_896_STATUS_FLAG_RATE_96000:
|
||||
*rate = 96000;
|
||||
break;
|
||||
default:
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int get_clock_rate_896(struct snd_motu *motu, unsigned int *rate)
|
||||
{
|
||||
__be32 reg;
|
||||
int err;
|
||||
|
||||
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||||
if (err < 0)
|
||||
return err;
|
||||
return parse_clock_rate_896(be32_to_cpu(reg), rate);
|
||||
}
|
||||
|
||||
int snd_motu_protocol_v1_get_clock_rate(struct snd_motu *motu, unsigned int *rate)
|
||||
{
|
||||
if (motu->spec == &snd_motu_spec_828)
|
||||
return get_clock_rate_828(motu, rate);
|
||||
else if (motu->spec == &snd_motu_spec_896)
|
||||
return get_clock_rate_896(motu, rate);
|
||||
else
|
||||
return -ENXIO;
|
||||
}
|
||||
@ -101,10 +192,48 @@ static int set_clock_rate_828(struct snd_motu *motu, unsigned int rate)
|
||||
return snd_motu_transaction_write(motu, CLK_828_STATUS_OFFSET, ®, sizeof(reg));
|
||||
}
|
||||
|
||||
static int set_clock_rate_896(struct snd_motu *motu, unsigned int rate)
|
||||
{
|
||||
unsigned int flag;
|
||||
__be32 reg;
|
||||
u32 data;
|
||||
int err;
|
||||
|
||||
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||||
if (err < 0)
|
||||
return err;
|
||||
data = be32_to_cpu(reg);
|
||||
|
||||
switch (rate) {
|
||||
case 44100:
|
||||
flag = CLK_896_STATUS_FLAG_RATE_44100;
|
||||
break;
|
||||
case 48000:
|
||||
flag = CLK_896_STATUS_FLAG_RATE_48000;
|
||||
break;
|
||||
case 88200:
|
||||
flag = CLK_896_STATUS_FLAG_RATE_88200;
|
||||
break;
|
||||
case 96000:
|
||||
flag = CLK_896_STATUS_FLAG_RATE_96000;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
data &= ~CLK_896_STATUS_MASK_RATE;
|
||||
data |= flag;
|
||||
|
||||
reg = cpu_to_be32(data);
|
||||
return snd_motu_transaction_write(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||||
}
|
||||
|
||||
int snd_motu_protocol_v1_set_clock_rate(struct snd_motu *motu, unsigned int rate)
|
||||
{
|
||||
if (motu->spec == &snd_motu_spec_828)
|
||||
return set_clock_rate_828(motu, rate);
|
||||
else if (motu->spec == &snd_motu_spec_896)
|
||||
return set_clock_rate_896(motu, rate);
|
||||
else
|
||||
return -ENXIO;
|
||||
}
|
||||
@ -137,10 +266,46 @@ static int get_clock_source_828(struct snd_motu *motu, enum snd_motu_clock_sourc
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int get_clock_source_896(struct snd_motu *motu, enum snd_motu_clock_source *src)
|
||||
{
|
||||
__be32 reg;
|
||||
u32 data;
|
||||
int err;
|
||||
|
||||
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||||
if (err < 0)
|
||||
return err;
|
||||
data = be32_to_cpu(reg);
|
||||
|
||||
switch (data & CLK_896_STATUS_MASK_SRC) {
|
||||
case CLK_896_STATUS_FLAG_SRC_INTERNAL:
|
||||
*src = SND_MOTU_CLOCK_SOURCE_INTERNAL;
|
||||
break;
|
||||
case CLK_896_STATUS_FLAG_SRC_ADAT_ON_OPT:
|
||||
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_OPT;
|
||||
break;
|
||||
case CLK_896_STATUS_FLAG_SRC_AESEBU:
|
||||
*src = SND_MOTU_CLOCK_SOURCE_AESEBU_ON_XLR;
|
||||
break;
|
||||
case CLK_896_STATUS_FLAG_SRC_WORD:
|
||||
*src = SND_MOTU_CLOCK_SOURCE_WORD_ON_BNC;
|
||||
break;
|
||||
case CLK_896_STATUS_FLAG_SRC_ADAT_ON_DSUB:
|
||||
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_DSUB;
|
||||
break;
|
||||
default:
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int snd_motu_protocol_v1_get_clock_source(struct snd_motu *motu, enum snd_motu_clock_source *src)
|
||||
{
|
||||
if (motu->spec == &snd_motu_spec_828)
|
||||
return get_clock_source_828(motu, src);
|
||||
else if (motu->spec == &snd_motu_spec_896)
|
||||
return get_clock_source_896(motu, src);
|
||||
else
|
||||
return -ENXIO;
|
||||
}
|
||||
@ -169,10 +334,31 @@ static int switch_fetching_mode_828(struct snd_motu *motu, bool enable)
|
||||
return snd_motu_transaction_write(motu, CLK_828_STATUS_OFFSET, ®, sizeof(reg));
|
||||
}
|
||||
|
||||
static int switch_fetching_mode_896(struct snd_motu *motu, bool enable)
|
||||
{
|
||||
__be32 reg;
|
||||
u32 data;
|
||||
int err;
|
||||
|
||||
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||||
if (err < 0)
|
||||
return err;
|
||||
data = be32_to_cpu(reg);
|
||||
|
||||
data &= ~(CLK_896_STATUS_FLAG_FETCH_ENABLE | CLK_896_STATUS_FLAG_MAIN_TO_HP);
|
||||
if (enable)
|
||||
data |= (CLK_896_STATUS_FLAG_FETCH_ENABLE | CLK_896_STATUS_FLAG_MAIN_TO_HP);
|
||||
|
||||
reg = cpu_to_be32(data);
|
||||
return snd_motu_transaction_write(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||||
}
|
||||
|
||||
int snd_motu_protocol_v1_switch_fetching_mode(struct snd_motu *motu, bool enable)
|
||||
{
|
||||
if (motu->spec == &snd_motu_spec_828)
|
||||
return switch_fetching_mode_828(motu, enable);
|
||||
else if (motu->spec == &snd_motu_spec_896)
|
||||
return switch_fetching_mode_896(motu, enable);
|
||||
else
|
||||
return -ENXIO;
|
||||
}
|
||||
@ -204,6 +390,27 @@ static int detect_packet_formats_828(struct snd_motu *motu)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int detect_packet_formats_896(struct snd_motu *motu)
|
||||
{
|
||||
// 24bit PCM frames follow to source packet header without message chunk.
|
||||
motu->tx_packet_formats.pcm_byte_offset = 4;
|
||||
motu->rx_packet_formats.pcm_byte_offset = 4;
|
||||
|
||||
// No message chunk in data block.
|
||||
motu->tx_packet_formats.msg_chunks = 0;
|
||||
motu->rx_packet_formats.msg_chunks = 0;
|
||||
|
||||
// Always enable optical interface for ADAT signal since the device have no registers
|
||||
// to refer to current configuration.
|
||||
motu->tx_packet_formats.pcm_chunks[0] += 8;
|
||||
motu->tx_packet_formats.pcm_chunks[1] += 8;
|
||||
|
||||
motu->rx_packet_formats.pcm_chunks[0] += 8;
|
||||
motu->rx_packet_formats.pcm_chunks[1] += 8;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int snd_motu_protocol_v1_cache_packet_formats(struct snd_motu *motu)
|
||||
{
|
||||
memcpy(motu->tx_packet_formats.pcm_chunks, motu->spec->tx_fixed_pcm_chunks,
|
||||
@ -213,6 +420,8 @@ int snd_motu_protocol_v1_cache_packet_formats(struct snd_motu *motu)
|
||||
|
||||
if (motu->spec == &snd_motu_spec_828)
|
||||
return detect_packet_formats_828(motu);
|
||||
else if (motu->spec == &snd_motu_spec_896)
|
||||
return detect_packet_formats_896(motu);
|
||||
else
|
||||
return 0;
|
||||
}
|
||||
@ -223,3 +432,9 @@ const struct snd_motu_spec snd_motu_spec_828 = {
|
||||
.tx_fixed_pcm_chunks = {10, 0, 0},
|
||||
.rx_fixed_pcm_chunks = {10, 0, 0},
|
||||
};
|
||||
|
||||
const struct snd_motu_spec snd_motu_spec_896 = {
|
||||
.name = "896",
|
||||
.tx_fixed_pcm_chunks = {10, 10, 0},
|
||||
.rx_fixed_pcm_chunks = {10, 10, 0},
|
||||
};
|
||||
|
@ -151,6 +151,7 @@ static void motu_bus_update(struct fw_unit *unit)
|
||||
|
||||
static const struct ieee1394_device_id motu_id_table[] = {
|
||||
SND_MOTU_DEV_ENTRY(0x000001, &snd_motu_spec_828),
|
||||
SND_MOTU_DEV_ENTRY(0x000002, &snd_motu_spec_896),
|
||||
SND_MOTU_DEV_ENTRY(0x000003, &snd_motu_spec_828mk2),
|
||||
SND_MOTU_DEV_ENTRY(0x000009, &snd_motu_spec_traveler),
|
||||
SND_MOTU_DEV_ENTRY(0x00000d, &snd_motu_spec_ultralite),
|
||||
|
@ -123,6 +123,7 @@ struct snd_motu_spec {
|
||||
};
|
||||
|
||||
extern const struct snd_motu_spec snd_motu_spec_828;
|
||||
extern const struct snd_motu_spec snd_motu_spec_896;
|
||||
|
||||
extern const struct snd_motu_spec snd_motu_spec_828mk2;
|
||||
extern const struct snd_motu_spec snd_motu_spec_traveler;
|
||||
|
Loading…
Reference in New Issue
Block a user