aec62xx: rework init_setup_aec6x80()

Rework init_setup_aec6x80() so that it won't rewrite the constant name strings
anymore -- in order to do this:

- in aec62xx_init_one(), pass a local copy of 'struct pci_device_id' down the
  call chain;

- change the names for in aec62xx_chipsets[] to default to AEC-6280[R];

- override the 'name' field in init_setup_aec6x80() only if bit 4 of the DMA
  status register is set.

While at it, also change the 'udma_mask' field for AEC-6x80R chips in this
function and remove the code doing the same from the init_hwif() method...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Sergei Shtylyov 2007-07-09 23:17:56 +02:00 committed by Bartlomiej Zolnierkiewicz
parent 83a6d4ab3b
commit b1d19db4e7

View File

@ -1,5 +1,5 @@
/*
* linux/drivers/ide/pci/aec62xx.c Version 0.21 Apr 21, 2007
* linux/drivers/ide/pci/aec62xx.c Version 0.22 Apr 23, 2007
*
* Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
@ -239,14 +239,6 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
}
hwif->ultra_mask = hwif->cds->udma_mask;
/* atp865 and atp865r */
if (hwif->ultra_mask == 0x3f) {
/* check bit 0x10 of DMA status register */
if (inb(pci_resource_start(dev, 4) + 2) & 0x10)
hwif->ultra_mask = 0x7f; /* udma0-6 */
}
hwif->mwdma_mask = 0x07;
hwif->ide_dma_check = &aec62xx_config_drive_xfer_rate;
@ -287,16 +279,12 @@ static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d
static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
{
unsigned long bar4reg = pci_resource_start(dev, 4);
unsigned long dma_base = pci_resource_start(dev, 4);
if (inb(bar4reg+2) & 0x10) {
strcpy(d->name, "AEC6880");
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
strcpy(d->name, "AEC6880R");
} else {
strcpy(d->name, "AEC6280");
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
strcpy(d->name, "AEC6280R");
if (inb(dma_base + 2) & 0x10) {
d->name = (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) ?
"AEC6880R" : "AEC6880";
d->udma_mask = 0x7f; /* udma0-6 */
}
return ide_setup_pci_device(dev, d);
@ -336,7 +324,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
.bootable = NEVER_BOARD,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 3 */
.name = "AEC6X80",
.name = "AEC6280",
.init_setup = init_setup_aec6x80,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
@ -346,7 +334,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
.bootable = OFF_BOARD,
.udma_mask = 0x3f, /* udma0-5 */
},{ /* 4 */
.name = "AEC6X80R",
.name = "AEC6280R",
.init_setup = init_setup_aec6x80,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
@ -366,13 +354,16 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
*
* Called when the PCI registration layer (or the IDE initialization)
* finds a device matching our IDE device tables.
*
* NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R]
* chips, pass a local copy of 'struct pci_device_id' down the call chain.
*/
static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data];
ide_pci_device_t d = aec62xx_chipsets[id->driver_data];
return d->init_setup(dev, d);
return d.init_setup(dev, &d);
}
static struct pci_device_id aec62xx_pci_tbl[] = {