mirror of
https://github.com/torvalds/linux.git
synced 2024-11-13 07:31:45 +00:00
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/nico/orion into devel-stable
This commit is contained in:
Russell King
commit
b12f3cbd7a
12
MAINTAINERS
12
MAINTAINERS
@ -781,11 +781,10 @@ M: Philipp Zabel <philipp.zabel@gmail.com>
|
||||
S: Maintained
|
||||
|
||||
ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support
|
||||
M: Lennert Buytenhek <buytenh@marvell.com>
|
||||
M: Nicolas Pitre <nico@marvell.com>
|
||||
M: Lennert Buytenhek <kernel@wantstofly.org>
|
||||
M: Nicolas Pitre <nico@fluxnic.net>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
T: git git://git.marvell.com/orion
|
||||
S: Maintained
|
||||
S: Odd Fixes
|
||||
F: arch/arm/mach-loki/
|
||||
F: arch/arm/mach-kirkwood/
|
||||
F: arch/arm/mach-mv78xx0/
|
||||
@ -3644,7 +3643,8 @@ F: drivers/net/wireless/mwl8k.c
|
||||
|
||||
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
|
||||
M: Nicolas Pitre <nico@fluxnic.net>
|
||||
S: Maintained
|
||||
S: Odd Fixes
|
||||
F: drivers/mmc/host/mvsdio.*
|
||||
|
||||
MARVELL YUKON / SYSKONNECT DRIVER
|
||||
M: Mirko Lindner <mlindner@syskonnect.de>
|
||||
@ -5141,7 +5141,7 @@ F: mm/sl?b.c
|
||||
|
||||
SMC91x ETHERNET DRIVER
|
||||
M: Nicolas Pitre <nico@fluxnic.net>
|
||||
S: Maintained
|
||||
S: Odd Fixes
|
||||
F: drivers/net/smc91x.*
|
||||
|
||||
SMSC47B397 HARDWARE MONITOR DRIVER
|
||||
|
||||
@ -38,6 +38,12 @@ config MACH_ESATA_SHEEVAPLUG
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Marvell eSATA SheevaPlug Reference Board.
|
||||
|
||||
config MACH_GURUPLUG
|
||||
bool "Marvell GuruPlug Reference Board"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Marvell GuruPlug Reference Board.
|
||||
|
||||
config MACH_TS219
|
||||
bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
|
||||
help
|
||||
@ -81,6 +87,18 @@ config MACH_INETSPACE_V2
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
LaCie Internet Space v2 NAS.
|
||||
|
||||
config MACH_NET2BIG_V2
|
||||
bool "LaCie 2Big Network v2 NAS Board"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
LaCie 2Big Network v2 NAS.
|
||||
|
||||
config MACH_NET5BIG_V2
|
||||
bool "LaCie 5Big Network v2 NAS Board"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
LaCie 5Big Network v2 NAS.
|
||||
|
||||
endmenu
|
||||
|
||||
endif
|
||||
|
||||
@ -6,10 +6,13 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
|
||||
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
|
||||
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
|
||||
obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
|
||||
obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
|
||||
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
|
||||
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
|
||||
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
|
||||
obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o
|
||||
obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o
|
||||
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o
|
||||
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o
|
||||
|
||||
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
|
||||
|
||||
131
arch/arm/mach-kirkwood/guruplug-setup.c
Normal file
131
arch/arm/mach-kirkwood/guruplug-setup.c
Normal file
@ -0,0 +1,131 @@
|
||||
/*
|
||||
* arch/arm/mach-kirkwood/guruplug-setup.c
|
||||
*
|
||||
* Marvell GuruPlug Reference Board Setup
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/leds.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <mach/kirkwood.h>
|
||||
#include <plat/mvsdio.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
static struct mtd_partition guruplug_nand_parts[] = {
|
||||
{
|
||||
.name = "u-boot",
|
||||
.offset = 0,
|
||||
.size = SZ_1M
|
||||
}, {
|
||||
.name = "uImage",
|
||||
.offset = MTDPART_OFS_NXTBLK,
|
||||
.size = SZ_4M
|
||||
}, {
|
||||
.name = "root",
|
||||
.offset = MTDPART_OFS_NXTBLK,
|
||||
.size = MTDPART_SIZ_FULL
|
||||
},
|
||||
};
|
||||
|
||||
static struct mv643xx_eth_platform_data guruplug_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
|
||||
};
|
||||
|
||||
static struct mv643xx_eth_platform_data guruplug_ge01_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
|
||||
};
|
||||
|
||||
static struct mv_sata_platform_data guruplug_sata_data = {
|
||||
.n_ports = 1,
|
||||
};
|
||||
|
||||
static struct mvsdio_platform_data guruplug_mvsdio_data = {
|
||||
/* unfortunately the CD signal has not been connected */
|
||||
};
|
||||
|
||||
static struct gpio_led guruplug_led_pins[] = {
|
||||
{
|
||||
.name = "guruplug:red:health",
|
||||
.gpio = 46,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "guruplug:green:health",
|
||||
.gpio = 47,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "guruplug:red:wmode",
|
||||
.gpio = 48,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "guruplug:green:wmode",
|
||||
.gpio = 49,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data guruplug_led_data = {
|
||||
.leds = guruplug_led_pins,
|
||||
.num_leds = ARRAY_SIZE(guruplug_led_pins),
|
||||
};
|
||||
|
||||
static struct platform_device guruplug_leds = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &guruplug_led_data,
|
||||
}
|
||||
};
|
||||
|
||||
static unsigned int guruplug_mpp_config[] __initdata = {
|
||||
MPP46_GPIO, /* M_RLED */
|
||||
MPP47_GPIO, /* M_GLED */
|
||||
MPP48_GPIO, /* B_RLED */
|
||||
MPP49_GPIO, /* B_GLED */
|
||||
0
|
||||
};
|
||||
|
||||
static void __init guruplug_init(void)
|
||||
{
|
||||
/*
|
||||
* Basic setup. Needs to be called early.
|
||||
*/
|
||||
kirkwood_init();
|
||||
kirkwood_mpp_conf(guruplug_mpp_config);
|
||||
|
||||
kirkwood_uart0_init();
|
||||
kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
|
||||
|
||||
kirkwood_ehci_init();
|
||||
kirkwood_ge00_init(&guruplug_ge00_data);
|
||||
kirkwood_ge01_init(&guruplug_ge01_data);
|
||||
kirkwood_sata_init(&guruplug_sata_data);
|
||||
kirkwood_sdio_init(&guruplug_mvsdio_data);
|
||||
|
||||
platform_device_register(&guruplug_leds);
|
||||
}
|
||||
|
||||
MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
|
||||
/* Maintainer: Siddarth Gore <gores@marvell.com> */
|
||||
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
||||
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = 0x00000100,
|
||||
.init_machine = guruplug_init,
|
||||
.map_io = kirkwood_map_io,
|
||||
.init_irq = kirkwood_init_irq,
|
||||
.timer = &kirkwood_timer,
|
||||
MACHINE_END
|
||||
415
arch/arm/mach-kirkwood/netxbig_v2-setup.c
Normal file
415
arch/arm/mach-kirkwood/netxbig_v2-setup.c
Normal file
@ -0,0 +1,415 @@
|
||||
/*
|
||||
* arch/arm/mach-kirkwood/netxbig_v2-setup.c
|
||||
*
|
||||
* LaCie 2Big and 5Big Network v2 board setup
|
||||
*
|
||||
* Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/spi/flash.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c/at24.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/leds.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <mach/kirkwood.h>
|
||||
#include <plat/time.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
/*****************************************************************************
|
||||
* 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
|
||||
****************************************************************************/
|
||||
|
||||
static struct mtd_partition netxbig_v2_flash_parts[] = {
|
||||
{
|
||||
.name = "u-boot",
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
.offset = 0,
|
||||
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
||||
},
|
||||
};
|
||||
|
||||
static const struct flash_platform_data netxbig_v2_flash = {
|
||||
.type = "mx25l4005a",
|
||||
.name = "spi_flash",
|
||||
.parts = netxbig_v2_flash_parts,
|
||||
.nr_parts = ARRAY_SIZE(netxbig_v2_flash_parts),
|
||||
};
|
||||
|
||||
static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = {
|
||||
{
|
||||
.modalias = "m25p80",
|
||||
.platform_data = &netxbig_v2_flash,
|
||||
.irq = -1,
|
||||
.max_speed_hz = 20000000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
},
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* Ethernet
|
||||
****************************************************************************/
|
||||
|
||||
static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
||||
};
|
||||
|
||||
static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* I2C devices
|
||||
****************************************************************************/
|
||||
|
||||
static struct at24_platform_data at24c04 = {
|
||||
.byte_len = SZ_4K / 8,
|
||||
.page_size = 16,
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c addr | chip | description
|
||||
* 0x50 | HT24LC04 | eeprom (512B)
|
||||
*/
|
||||
|
||||
static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("24c04", 0x50),
|
||||
.platform_data = &at24c04,
|
||||
}
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* SATA
|
||||
****************************************************************************/
|
||||
|
||||
static struct mv_sata_platform_data netxbig_v2_sata_data = {
|
||||
.n_ports = 2,
|
||||
};
|
||||
|
||||
static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
|
||||
|
||||
static void __init netxbig_v2_sata_power_init(void)
|
||||
{
|
||||
int i;
|
||||
int err;
|
||||
int hdd_nb;
|
||||
|
||||
if (machine_is_net2big_v2())
|
||||
hdd_nb = 2;
|
||||
else
|
||||
hdd_nb = 5;
|
||||
|
||||
/* Power up all hard disks. */
|
||||
for (i = 0; i < hdd_nb; i++) {
|
||||
err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL);
|
||||
if (err == 0) {
|
||||
err = gpio_direction_output(
|
||||
netxbig_v2_gpio_hdd_power[i], 1);
|
||||
/* Free the HDD power GPIOs. This allow user-space to
|
||||
* configure them via the gpiolib sysfs interface. */
|
||||
gpio_free(netxbig_v2_gpio_hdd_power[i]);
|
||||
}
|
||||
if (err)
|
||||
pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1);
|
||||
}
|
||||
}
|
||||
|
||||
/*****************************************************************************
|
||||
* GPIO keys
|
||||
****************************************************************************/
|
||||
|
||||
#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13
|
||||
#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15
|
||||
#define NETXBIG_V2_GPIO_FUNC_BUTTON 34
|
||||
|
||||
#define NETXBIG_V2_SWITCH_POWER_ON 0x1
|
||||
#define NETXBIG_V2_SWITCH_POWER_OFF 0x2
|
||||
|
||||
static struct gpio_keys_button netxbig_v2_buttons[] = {
|
||||
[0] = {
|
||||
.type = EV_SW,
|
||||
.code = NETXBIG_V2_SWITCH_POWER_ON,
|
||||
.gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
|
||||
.desc = "Back power switch (on|auto)",
|
||||
.active_low = 1,
|
||||
},
|
||||
[1] = {
|
||||
.type = EV_SW,
|
||||
.code = NETXBIG_V2_SWITCH_POWER_OFF,
|
||||
.gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
|
||||
.desc = "Back power switch (auto|off)",
|
||||
.active_low = 1,
|
||||
},
|
||||
[2] = {
|
||||
.code = KEY_OPTION,
|
||||
.gpio = NETXBIG_V2_GPIO_FUNC_BUTTON,
|
||||
.desc = "Function button",
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data netxbig_v2_button_data = {
|
||||
.buttons = netxbig_v2_buttons,
|
||||
.nbuttons = ARRAY_SIZE(netxbig_v2_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device netxbig_v2_gpio_buttons = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &netxbig_v2_button_data,
|
||||
},
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* GPIO LEDs
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* The LEDs are controlled by a CPLD and can be configured through a GPIO
|
||||
* extension bus:
|
||||
*
|
||||
* - address register : bit [0-2] -> GPIO [47-49]
|
||||
* - data register : bit [0-2] -> GPIO [44-46]
|
||||
* - enable register : GPIO 29
|
||||
*
|
||||
* Address register selection:
|
||||
*
|
||||
* addr | register
|
||||
* ----------------------------
|
||||
* 0 | front LED
|
||||
* 1 | front LED brightness
|
||||
* 2 | HDD LED brightness
|
||||
* 3 | HDD1 LED
|
||||
* 4 | HDD2 LED
|
||||
* 5 | HDD3 LED
|
||||
* 6 | HDD4 LED
|
||||
* 7 | HDD5 LED
|
||||
*
|
||||
* Data register configuration:
|
||||
*
|
||||
* data | LED brightness
|
||||
* -------------------------------------------------
|
||||
* 0 | min (off)
|
||||
* - | -
|
||||
* 7 | max
|
||||
*
|
||||
* data | front LED mode
|
||||
* -------------------------------------------------
|
||||
* 0 | fix off
|
||||
* 1 | fix blue on
|
||||
* 2 | fix red on
|
||||
* 3 | blink blue on=1 sec and blue off=1 sec
|
||||
* 4 | blink red on=1 sec and red off=1 sec
|
||||
* 5 | blink blue on=2.5 sec and red on=0.5 sec
|
||||
* 6 | blink blue on=1 sec and red on=1 sec
|
||||
* 7 | blink blue on=0.5 sec and blue off=2.5 sec
|
||||
*
|
||||
* data | HDD LED mode
|
||||
* -------------------------------------------------
|
||||
* 0 | fix blue on
|
||||
* 1 | SATA activity blink
|
||||
* 2 | fix red on
|
||||
* 3 | blink blue on=1 sec and blue off=1 sec
|
||||
* 4 | blink red on=1 sec and red off=1 sec
|
||||
* 5 | blink blue on=2.5 sec and red on=0.5 sec
|
||||
* 6 | blink blue on=1 sec and red on=1 sec
|
||||
* 7 | blink blue on=0.5 sec and blue off=2.5 sec
|
||||
*/
|
||||
|
||||
/*****************************************************************************
|
||||
* Timer
|
||||
****************************************************************************/
|
||||
|
||||
static void netxbig_v2_timer_init(void)
|
||||
{
|
||||
kirkwood_tclk = 166666667;
|
||||
orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
|
||||
}
|
||||
|
||||
struct sys_timer netxbig_v2_timer = {
|
||||
.init = netxbig_v2_timer_init,
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* General Setup
|
||||
****************************************************************************/
|
||||
|
||||
static unsigned int net2big_v2_mpp_config[] __initdata = {
|
||||
MPP0_SPI_SCn,
|
||||
MPP1_SPI_MOSI,
|
||||
MPP2_SPI_SCK,
|
||||
MPP3_SPI_MISO,
|
||||
MPP6_SYSRST_OUTn,
|
||||
MPP7_GPO, /* Request power-off */
|
||||
MPP8_TW_SDA,
|
||||
MPP9_TW_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
MPP11_UART0_RXD,
|
||||
MPP13_GPIO, /* Rear power switch (on|auto) */
|
||||
MPP14_GPIO, /* USB fuse alarm */
|
||||
MPP15_GPIO, /* Rear power switch (auto|off) */
|
||||
MPP16_GPIO, /* SATA HDD1 power */
|
||||
MPP17_GPIO, /* SATA HDD2 power */
|
||||
MPP20_SATA1_ACTn,
|
||||
MPP21_SATA0_ACTn,
|
||||
MPP24_GPIO, /* USB mode select */
|
||||
MPP26_GPIO, /* USB device vbus */
|
||||
MPP28_GPIO, /* USB enable host vbus */
|
||||
MPP29_GPIO, /* CPLD extension ALE */
|
||||
MPP34_GPIO, /* Rear Push button */
|
||||
MPP35_GPIO, /* Inhibit switch power-off */
|
||||
MPP36_GPIO, /* SATA HDD1 presence */
|
||||
MPP37_GPIO, /* SATA HDD2 presence */
|
||||
MPP40_GPIO, /* eSATA presence */
|
||||
MPP44_GPIO, /* CPLD extension (data 0) */
|
||||
MPP45_GPIO, /* CPLD extension (data 1) */
|
||||
MPP46_GPIO, /* CPLD extension (data 2) */
|
||||
MPP47_GPIO, /* CPLD extension (addr 0) */
|
||||
MPP48_GPIO, /* CPLD extension (addr 1) */
|
||||
MPP49_GPIO, /* CPLD extension (addr 2) */
|
||||
0
|
||||
};
|
||||
|
||||
static unsigned int net5big_v2_mpp_config[] __initdata = {
|
||||
MPP0_SPI_SCn,
|
||||
MPP1_SPI_MOSI,
|
||||
MPP2_SPI_SCK,
|
||||
MPP3_SPI_MISO,
|
||||
MPP6_SYSRST_OUTn,
|
||||
MPP7_GPO, /* Request power-off */
|
||||
MPP8_TW_SDA,
|
||||
MPP9_TW_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
MPP11_UART0_RXD,
|
||||
MPP13_GPIO, /* Rear power switch (on|auto) */
|
||||
MPP14_GPIO, /* USB fuse alarm */
|
||||
MPP15_GPIO, /* Rear power switch (auto|off) */
|
||||
MPP16_GPIO, /* SATA HDD1 power */
|
||||
MPP17_GPIO, /* SATA HDD2 power */
|
||||
MPP20_GE1_0,
|
||||
MPP21_GE1_1,
|
||||
MPP22_GE1_2,
|
||||
MPP23_GE1_3,
|
||||
MPP24_GE1_4,
|
||||
MPP25_GE1_5,
|
||||
MPP26_GE1_6,
|
||||
MPP27_GE1_7,
|
||||
MPP28_GPIO, /* USB enable host vbus */
|
||||
MPP29_GPIO, /* CPLD extension ALE */
|
||||
MPP30_GE1_10,
|
||||
MPP31_GE1_11,
|
||||
MPP32_GE1_12,
|
||||
MPP33_GE1_13,
|
||||
MPP34_GPIO, /* Rear Push button */
|
||||
MPP35_GPIO, /* Inhibit switch power-off */
|
||||
MPP36_GPIO, /* SATA HDD1 presence */
|
||||
MPP37_GPIO, /* SATA HDD2 presence */
|
||||
MPP38_GPIO, /* SATA HDD3 presence */
|
||||
MPP39_GPIO, /* SATA HDD4 presence */
|
||||
MPP40_GPIO, /* SATA HDD5 presence */
|
||||
MPP41_GPIO, /* SATA HDD3 power */
|
||||
MPP42_GPIO, /* SATA HDD4 power */
|
||||
MPP43_GPIO, /* SATA HDD5 power */
|
||||
MPP44_GPIO, /* CPLD extension (data 0) */
|
||||
MPP45_GPIO, /* CPLD extension (data 1) */
|
||||
MPP46_GPIO, /* CPLD extension (data 2) */
|
||||
MPP47_GPIO, /* CPLD extension (addr 0) */
|
||||
MPP48_GPIO, /* CPLD extension (addr 1) */
|
||||
MPP49_GPIO, /* CPLD extension (addr 2) */
|
||||
0
|
||||
};
|
||||
|
||||
#define NETXBIG_V2_GPIO_POWER_OFF 7
|
||||
|
||||
static void netxbig_v2_power_off(void)
|
||||
{
|
||||
gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
|
||||
}
|
||||
|
||||
static void __init netxbig_v2_init(void)
|
||||
{
|
||||
/*
|
||||
* Basic setup. Needs to be called early.
|
||||
*/
|
||||
kirkwood_init();
|
||||
if (machine_is_net2big_v2())
|
||||
kirkwood_mpp_conf(net2big_v2_mpp_config);
|
||||
else
|
||||
kirkwood_mpp_conf(net5big_v2_mpp_config);
|
||||
|
||||
netxbig_v2_sata_power_init();
|
||||
|
||||
kirkwood_ehci_init();
|
||||
kirkwood_ge00_init(&netxbig_v2_ge00_data);
|
||||
if (machine_is_net5big_v2())
|
||||
kirkwood_ge01_init(&netxbig_v2_ge01_data);
|
||||
kirkwood_sata_init(&netxbig_v2_sata_data);
|
||||
kirkwood_uart0_init();
|
||||
spi_register_board_info(netxbig_v2_spi_slave_info,
|
||||
ARRAY_SIZE(netxbig_v2_spi_slave_info));
|
||||
kirkwood_spi_init();
|
||||
kirkwood_i2c_init();
|
||||
i2c_register_board_info(0, netxbig_v2_i2c_info,
|
||||
ARRAY_SIZE(netxbig_v2_i2c_info));
|
||||
|
||||
platform_device_register(&netxbig_v2_gpio_buttons);
|
||||
|
||||
if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
|
||||
gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
|
||||
pm_power_off = netxbig_v2_power_off;
|
||||
else
|
||||
pr_err("netxbig_v2: failed to configure power-off GPIO\n");
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MACH_NET2BIG_V2
|
||||
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
|
||||
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
||||
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = 0x00000100,
|
||||
.init_machine = netxbig_v2_init,
|
||||
.map_io = kirkwood_map_io,
|
||||
.init_irq = kirkwood_init_irq,
|
||||
.timer = &netxbig_v2_timer,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_NET5BIG_V2
|
||||
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
|
||||
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
||||
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = 0x00000100,
|
||||
.init_machine = netxbig_v2_init,
|
||||
.map_io = kirkwood_map_io,
|
||||
.init_irq = kirkwood_init_irq,
|
||||
.timer = &netxbig_v2_timer,
|
||||
MACHINE_END
|
||||
#endif
|
||||
@ -439,6 +439,7 @@ static void __init dns323_init(void)
|
||||
*/
|
||||
if (dns323_dev_id() == MV88F5181_DEV_ID) {
|
||||
dns323_leds[0].active_low = 1;
|
||||
gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
|
||||
gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
|
||||
}
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user