Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-10 22:21:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

rtc: pcf2127: support generic watchdog timing configuration

Browse Source 
Introduce in the configuration structure two new values to hold the
watchdog clock source and the min_hw_heartbeat_ms value.

The minimum and maximum timeout values are automatically computed from
the watchdog clock source value for each variant.

The PCF2131 has no 1Hz watchdog clock source, as is the case for
PCF2127/29.

The next best choice is using a 1/4Hz clock, giving a watchdog timeout
range between 4 and 1016s. By using the same register configuration as
for the PCF2127/29, the 1/4Hz clock source is selected.

Note: the PCF2127 datasheet gives a min/max range between 1 and 255s,
but it should be between 2 and 254s, because the watchdog is triggered
when the timer value reaches 1, not 0.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20230622145800.2442116-15-hugo@hugovil.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This commit is contained in:
Hugo Villeneuve 2023-06-22 10:57:57 -04:00 committed by Alexandre Belloni
parent 3d715ebaf0
commit adb9675d74
1 changed files with 55 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
drivers/rtc/rtc-pcf2127.c
View File

@ -80,9 +80,14 @@
/* Watchdog timer value constants */
#define PCF2127_WD_VAL_STOP 0
#define PCF2127_WD_VAL_MIN 2
#define PCF2127_WD_VAL_MAX 255
#define PCF2127_WD_VAL_DEFAULT 60
/* PCF2127/29 watchdog timer value constants */
#define PCF2127_WD_CLOCK_HZ_X1000 1000 /* 1Hz */
#define PCF2127_WD_MIN_HW_HEARTBEAT_MS 500
/* PCF2131 watchdog timer value constants */
#define PCF2131_WD_CLOCK_HZ_X1000 250 /* 1/4Hz */
#define PCF2131_WD_MIN_HW_HEARTBEAT_MS 4000
#define PCF2127_WD_DEFAULT_TIMEOUT_S 60
/* Mask for currently enabled interrupts */
#define PCF2127_CTRL1_IRQ_MASK (PCF2127_BIT_CTRL1_TSF1)
@ -186,6 +191,8 @@ struct pcf21xx_config {
u8 reg_wd_ctl; /* Watchdog control register. */
u8 reg_wd_val; /* Watchdog value register. */
u8 reg_clkout; /* Clkout register. */
int wdd_clock_hz_x1000; /* Watchdog clock in Hz multiplicated by 1000 */
int wdd_min_hw_heartbeat_ms;
unsigned int ts_count;
struct pcf21xx_ts_config ts[PCF2127_MAX_TS_SUPPORTED];
struct attribute_group attribute_group;
@ -389,9 +396,16 @@ static int pcf2127_nvmem_write(void *priv, unsigned int offset,
static int pcf2127_wdt_ping(struct watchdog_device *wdd)
{
int wd_val;
struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd);
return regmap_write(pcf2127->regmap, pcf2127->cfg->reg_wd_val, wdd->timeout);
/*
* Compute counter value of WATCHDG_TIM_VAL to obtain desired period
* in seconds, depending on the source clock frequency.
*/
wd_val = ((wdd->timeout * pcf2127->cfg->wdd_clock_hz_x1000) / 1000) + 1;
return regmap_write(pcf2127->regmap, pcf2127->cfg->reg_wd_val, wd_val);
}
/*
@ -453,6 +467,23 @@ static const struct watchdog_ops pcf2127_watchdog_ops = {
.set_timeout = pcf2127_wdt_set_timeout,
};
/*
* Compute watchdog period, t, in seconds, from the WATCHDG_TIM_VAL register
* value, n, and the clock frequency, f1000, in Hz x 1000.
*
* The PCF2127/29 datasheet gives t as:
* t = n / f
* The PCF2131 datasheet gives t as:
* t = (n - 1) / f
* For both variants, the watchdog is triggered when the WATCHDG_TIM_VAL reaches
* the value 1, and not zero. Consequently, the equation from the PCF2131
* datasheet seems to be the correct one for both variants.
*/
static int pcf2127_watchdog_get_period(int n, int f1000)
{
return (1000 * (n - 1)) / f1000;
}
static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
{
u32 wdd_timeout;
@ -465,10 +496,19 @@ static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
pcf2127->wdd.parent = dev;
pcf2127->wdd.info = &pcf2127_wdt_info;
pcf2127->wdd.ops = &pcf2127_watchdog_ops;
pcf2127->wdd.min_timeout = PCF2127_WD_VAL_MIN;
pcf2127->wdd.max_timeout = PCF2127_WD_VAL_MAX;
pcf2127->wdd.timeout = PCF2127_WD_VAL_DEFAULT;
pcf2127->wdd.min_hw_heartbeat_ms = 500;
pcf2127->wdd.min_timeout =
pcf2127_watchdog_get_period(
2, pcf2127->cfg->wdd_clock_hz_x1000);
pcf2127->wdd.max_timeout =
pcf2127_watchdog_get_period(
255, pcf2127->cfg->wdd_clock_hz_x1000);
pcf2127->wdd.timeout = PCF2127_WD_DEFAULT_TIMEOUT_S;
dev_dbg(dev, "%s clock = %d Hz / 1000\n", __func__,
pcf2127->cfg->wdd_clock_hz_x1000);
pcf2127->wdd.min_hw_heartbeat_ms = pcf2127->cfg->wdd_min_hw_heartbeat_ms;
pcf2127->wdd.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
watchdog_set_drvdata(&pcf2127->wdd, pcf2127);
@ -885,6 +925,8 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
.reg_wd_ctl = PCF2127_REG_WD_CTL,
.reg_wd_val = PCF2127_REG_WD_VAL,
.reg_clkout = PCF2127_REG_CLKOUT,
.wdd_clock_hz_x1000 = PCF2127_WD_CLOCK_HZ_X1000,
.wdd_min_hw_heartbeat_ms = PCF2127_WD_MIN_HW_HEARTBEAT_MS,
.ts_count = 1,
.ts[0] = {
.reg_base = PCF2127_REG_TS1_BASE,
@ -910,6 +952,8 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
.reg_wd_ctl = PCF2127_REG_WD_CTL,
.reg_wd_val = PCF2127_REG_WD_VAL,
.reg_clkout = PCF2127_REG_CLKOUT,
.wdd_clock_hz_x1000 = PCF2127_WD_CLOCK_HZ_X1000,
.wdd_min_hw_heartbeat_ms = PCF2127_WD_MIN_HW_HEARTBEAT_MS,
.ts_count = 1,
.ts[0] = {
.reg_base = PCF2127_REG_TS1_BASE,
@ -935,6 +979,8 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
.reg_wd_ctl = PCF2131_REG_WD_CTL,
.reg_wd_val = PCF2131_REG_WD_VAL,
.reg_clkout = PCF2131_REG_CLKOUT,
.wdd_clock_hz_x1000 = PCF2131_WD_CLOCK_HZ_X1000,
.wdd_min_hw_heartbeat_ms = PCF2131_WD_MIN_HW_HEARTBEAT_MS,
.ts_count = 4,
.ts[0] = {
.reg_base = PCF2131_REG_TS1_BASE,
@ -1148,7 +1194,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
/*
* Watchdog timer enabled and reset pin /RST activated when timed out.
* Select 1Hz clock source for watchdog timer.
* Select 1Hz clock source for watchdog timer (1/4Hz for PCF2131).
* Note: Countdown timer disabled and not available.
* For pca2129, pcf2129 and pcf2131, only bit[7] is for Symbol WD_CD
* of register watchdg_tim_ctl. The bit[6] is labeled