Merge branch 'for-6.3/logitech' into for-linus

- HID++ fixes for scroll wheel, protocol and debug (Bastien Nocera)
- add support of Logitech G923 Xbox Edition steering wheel (Walt Holman)

MAINTAINERS

@@ -9217,6 +9217,13 @@ L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/hid-logitech-*
 
+HID++ LOGITECH DRIVERS
+R:	Filipe Laíns <lains@riseup.net>
+R:	Bastien Nocera <hadess@hadess.net>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/hid/hid-logitech-hidpp.c
+
 HID PLAYSTATION DRIVER
 M:	Roderick Colenbrander <roderick.colenbrander@sony.com>
 L:	linux-input@vger.kernel.org

drivers/hid/hid-ids.h

@@ -825,6 +825,7 @@
 #define USB_DEVICE_ID_LOGITECH_G510_USB_AUDIO	0xc22e
 #define USB_DEVICE_ID_LOGITECH_G29_WHEEL	0xc24f
 #define USB_DEVICE_ID_LOGITECH_G920_WHEEL	0xc262
+#define USB_DEVICE_ID_LOGITECH_G923_XBOX_WHEEL	0xc26e
 #define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D	0xc283
 #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO	0xc286
 #define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940	0xc287

drivers/hid/hid-logitech-hidpp.c

@@ -30,11 +30,7 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
 MODULE_AUTHOR("Nestor Lopez Casado <nlopezcasad@logitech.com>");
-
+MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>");
-static bool disable_raw_mode;
-module_param(disable_raw_mode, bool, 0644);
-MODULE_PARM_DESC(disable_raw_mode,
-	"Disable Raw mode reporting for touchpads and keep firmware gestures.");
 
 static bool disable_tap_to_click;
 module_param(disable_tap_to_click, bool, 0644);
@@ -71,12 +67,13 @@ MODULE_PARM_DESC(disable_tap_to_click,
 /* bits 2..20 are reserved for classes */
 /* #define HIDPP_QUIRK_CONNECT_EVENTS		BIT(21) disabled */
 #define HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS	BIT(22)
-#define HIDPP_QUIRK_NO_HIDINPUT			BIT(23)
+#define HIDPP_QUIRK_DELAYED_INIT		BIT(23)
 #define HIDPP_QUIRK_FORCE_OUTPUT_REPORTS	BIT(24)
 #define HIDPP_QUIRK_UNIFYING			BIT(25)
 #define HIDPP_QUIRK_HIDPP_WHEELS		BIT(26)
 #define HIDPP_QUIRK_HIDPP_EXTRA_MOUSE_BTNS	BIT(27)
 #define HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS	BIT(28)
+#define HIDPP_QUIRK_HI_RES_SCROLL_1P0		BIT(29)
 
 /* These are just aliases for now */
 #define HIDPP_QUIRK_KBD_SCROLL_WHEEL HIDPP_QUIRK_HIDPP_WHEELS
@@ -87,8 +84,6 @@ MODULE_PARM_DESC(disable_tap_to_click,
 					 HIDPP_CAPABILITY_HIDPP20_HI_RES_SCROLL | \
 					 HIDPP_CAPABILITY_HIDPP20_HI_RES_WHEEL)
 
-#define HIDPP_QUIRK_DELAYED_INIT		HIDPP_QUIRK_NO_HIDINPUT
-
 #define HIDPP_CAPABILITY_HIDPP10_BATTERY	BIT(0)
 #define HIDPP_CAPABILITY_HIDPP20_BATTERY	BIT(1)
 #define HIDPP_CAPABILITY_BATTERY_MILEAGE	BIT(2)
@@ -225,6 +220,16 @@ struct hidpp_device {
 #define HIDPP_ERROR_INVALID_PARAM_VALUE		0x0b
 #define HIDPP_ERROR_WRONG_PIN_CODE		0x0c
 /* HID++ 2.0 error codes */
+#define HIDPP20_ERROR_NO_ERROR			0x00
+#define HIDPP20_ERROR_UNKNOWN			0x01
+#define HIDPP20_ERROR_INVALID_ARGS		0x02
+#define HIDPP20_ERROR_OUT_OF_RANGE		0x03
+#define HIDPP20_ERROR_HW_ERROR			0x04
+#define HIDPP20_ERROR_LOGITECH_INTERNAL		0x05
+#define HIDPP20_ERROR_INVALID_FEATURE_INDEX	0x06
+#define HIDPP20_ERROR_INVALID_FUNCTION_ID	0x07
+#define HIDPP20_ERROR_BUSY			0x08
+#define HIDPP20_ERROR_UNSUPPORTED		0x09
 #define HIDPP20_ERROR				0xff
 
 static void hidpp_connect_event(struct hidpp_device *hidpp_dev);
@@ -279,6 +284,7 @@ static int hidpp_send_message_sync(struct hidpp_device *hidpp,
 	struct hidpp_report *response)
 {
 	int ret;
+	int max_retries = 3;
 
 	mutex_lock(&hidpp->send_mutex);
 
@@ -291,34 +297,39 @@ static int hidpp_send_message_sync(struct hidpp_device *hidpp,
 	 */
 	*response = *message;
 
-	ret = __hidpp_send_report(hidpp->hid_dev, message);
+	for (; max_retries != 0; max_retries--) {
+		ret = __hidpp_send_report(hidpp->hid_dev, message);
 
-	if (ret) {
+		if (ret) {
-		dbg_hid("__hidpp_send_report returned err: %d\n", ret);
+			dbg_hid("__hidpp_send_report returned err: %d\n", ret);
-		memset(response, 0, sizeof(struct hidpp_report));
+			memset(response, 0, sizeof(struct hidpp_report));
-		goto exit;
+			goto exit;
-	}
+		}
 
-	if (!wait_event_timeout(hidpp->wait, hidpp->answer_available,
+		if (!wait_event_timeout(hidpp->wait, hidpp->answer_available,
-				5*HZ)) {
+					5*HZ)) {
-		dbg_hid("%s:timeout waiting for response\n", __func__);
+			dbg_hid("%s:timeout waiting for response\n", __func__);
-		memset(response, 0, sizeof(struct hidpp_report));
+			memset(response, 0, sizeof(struct hidpp_report));
-		ret = -ETIMEDOUT;
+			ret = -ETIMEDOUT;
-	}
+		}
 
-	if (response->report_id == REPORT_ID_HIDPP_SHORT &&
+		if (response->report_id == REPORT_ID_HIDPP_SHORT &&
-	    response->rap.sub_id == HIDPP_ERROR) {
+		    response->rap.sub_id == HIDPP_ERROR) {
-		ret = response->rap.params[1];
+			ret = response->rap.params[1];
-		dbg_hid("%s:got hidpp error %02X\n", __func__, ret);
+			dbg_hid("%s:got hidpp error %02X\n", __func__, ret);
-		goto exit;
+			goto exit;
-	}
+		}
 
-	if ((response->report_id == REPORT_ID_HIDPP_LONG ||
+		if ((response->report_id == REPORT_ID_HIDPP_LONG ||
-			response->report_id == REPORT_ID_HIDPP_VERY_LONG) &&
+		     response->report_id == REPORT_ID_HIDPP_VERY_LONG) &&
-			response->fap.feature_index == HIDPP20_ERROR) {
+		    response->fap.feature_index == HIDPP20_ERROR) {
-		ret = response->fap.params[1];
+			ret = response->fap.params[1];
-		dbg_hid("%s:got hidpp 2.0 error %02X\n", __func__, ret);
+			if (ret != HIDPP20_ERROR_BUSY) {
-		goto exit;
+				dbg_hid("%s:got hidpp 2.0 error %02X\n", __func__, ret);
+				goto exit;
+			}
+			dbg_hid("%s:got busy hidpp 2.0 error %02X, retrying\n", __func__, ret);
+		}
 	}
 
 exit:
@@ -334,8 +345,13 @@ static int hidpp_send_fap_command_sync(struct hidpp_device *hidpp,
 	struct hidpp_report *message;
 	int ret;
 
-	if (param_count > sizeof(message->fap.params))
+	if (param_count > sizeof(message->fap.params)) {
+		hid_dbg(hidpp->hid_dev,
+			"Invalid number of parameters passed to command (%d != %llu)\n",
+			param_count,
+			(unsigned long long) sizeof(message->fap.params));
 		return -EINVAL;
+	}
 
 	message = kzalloc(sizeof(struct hidpp_report), GFP_KERNEL);
 	if (!message)
@@ -3436,11 +3452,17 @@ static int hi_res_scroll_enable(struct hidpp_device *hidpp)
 		ret = hidpp10_enable_scrolling_acceleration(hidpp);
 		multiplier = 8;
 	}
-	if (ret)
+	if (ret) {
+		hid_dbg(hidpp->hid_dev,
+			"Could not enable hi-res scrolling: %d\n", ret);
 		return ret;
+	}
 
-	if (multiplier == 0)
+	if (multiplier == 0) {
+		hid_dbg(hidpp->hid_dev,
+			"Invalid multiplier 0 from device, setting it to 1\n");
 		multiplier = 1;
+	}
 
 	hidpp->vertical_wheel_counter.wheel_multiplier = multiplier;
 	hid_dbg(hidpp->hid_dev, "wheel multiplier = %d\n", multiplier);
@@ -3472,14 +3494,8 @@ static int hidpp_initialize_hires_scroll(struct hidpp_device *hidpp)
 			hid_dbg(hidpp->hid_dev, "Detected HID++ 2.0 hi-res scrolling\n");
 		}
 	} else {
-		struct hidpp_report response;
+		/* We cannot detect fast scrolling support on HID++ 1.0 devices */
-
+		if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) {
-		ret = hidpp_send_rap_command_sync(hidpp,
-						  REPORT_ID_HIDPP_SHORT,
-						  HIDPP_GET_REGISTER,
-						  HIDPP_ENABLE_FAST_SCROLL,
-						  NULL, 0, &response);
-		if (!ret) {
 			hidpp->capabilities |= HIDPP_CAPABILITY_HIDPP10_FAST_SCROLL;
 			hid_dbg(hidpp->hid_dev, "Detected HID++ 1.0 fast scroll\n");
 		}
@@ -4002,7 +4018,7 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 	if (hidpp->capabilities & HIDPP_CAPABILITY_HI_RES_SCROLL)
 		hi_res_scroll_enable(hidpp);
 
-	if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT) || hidpp->delayed_input)
+	if (!(hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT) || hidpp->delayed_input)
 		/* if the input nodes are already created, we can stop now */
 		return;
 
@@ -4107,6 +4123,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	bool connected;
 	unsigned int connect_mask = HID_CONNECT_DEFAULT;
 	struct hidpp_ff_private_data data;
+	bool will_restart = false;
 
 	/* report_fixup needs drvdata to be set before we call hid_parse */
 	hidpp = devm_kzalloc(&hdev->dev, sizeof(*hidpp), GFP_KERNEL);
@@ -4147,11 +4164,6 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	    hidpp_application_equals(hdev, HID_GD_KEYBOARD))
 		hidpp->quirks |= HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS;
 
-	if (disable_raw_mode) {
-		hidpp->quirks &= ~HIDPP_QUIRK_CLASS_WTP;
-		hidpp->quirks &= ~HIDPP_QUIRK_NO_HIDINPUT;
-	}
-
 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP) {
 		ret = wtp_allocate(hdev, id);
 		if (ret)
@@ -4162,6 +4174,10 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 			return ret;
 	}
 
+	if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT ||
+	    hidpp->quirks & HIDPP_QUIRK_UNIFYING)
+		will_restart = true;
+
 	INIT_WORK(&hidpp->work, delayed_work_cb);
 	mutex_init(&hidpp->send_mutex);
 	init_waitqueue_head(&hidpp->wait);
@@ -4176,7 +4192,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	 * Plain USB connections need to actually call start and open
 	 * on the transport driver to allow incoming data.
 	 */
-	ret = hid_hw_start(hdev, 0);
+	ret = hid_hw_start(hdev, will_restart ? 0 : connect_mask);
 	if (ret) {
 		hid_err(hdev, "hw start failed\n");
 		goto hid_hw_start_fail;
@@ -4213,6 +4229,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 			hidpp->wireless_feature_index = 0;
 		else if (ret)
 			goto hid_hw_init_fail;
+		ret = 0;
 	}
 
 	if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
@@ -4227,19 +4244,21 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	hidpp_connect_event(hidpp);
 
-	/* Reset the HID node state */
+	if (will_restart) {
-	hid_device_io_stop(hdev);
+		/* Reset the HID node state */
-	hid_hw_close(hdev);
+		hid_device_io_stop(hdev);
-	hid_hw_stop(hdev);
+		hid_hw_close(hdev);
+		hid_hw_stop(hdev);
 
-	if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
+		if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT)
-		connect_mask &= ~HID_CONNECT_HIDINPUT;
+			connect_mask &= ~HID_CONNECT_HIDINPUT;
 
-	/* Now export the actual inputs and hidraw nodes to the world */
+		/* Now export the actual inputs and hidraw nodes to the world */
-	ret = hid_hw_start(hdev, connect_mask);
+		ret = hid_hw_start(hdev, connect_mask);
-	if (ret) {
+		if (ret) {
-		hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
+			hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
-		goto hid_hw_start_fail;
+			goto hid_hw_start_fail;
+		}
 	}
 
 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
@@ -4297,9 +4316,15 @@ static const struct hid_device_id hidpp_devices[] = {
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH,
 		USB_DEVICE_ID_LOGITECH_T651),
 	  .driver_data = HIDPP_QUIRK_CLASS_WTP },
+	{ /* Mouse Logitech Anywhere MX */
+	  LDJ_DEVICE(0x1017), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 },
 	{ /* Mouse logitech M560 */
 	  LDJ_DEVICE(0x402d),
 	  .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 },
+	{ /* Mouse Logitech M705 (firmware RQM17) */
+	  LDJ_DEVICE(0x101b), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 },
+	{ /* Mouse Logitech Performance MX */
+	  LDJ_DEVICE(0x101a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 },
 	{ /* Keyboard logitech K400 */
 	  LDJ_DEVICE(0x4024),
 	  .driver_data = HIDPP_QUIRK_CLASS_K400 },
@@ -4348,6 +4373,9 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* Logitech G920 Wheel over USB */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL),
 		.driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS},
+	{ /* Logitech G923 Wheel (Xbox version) over USB */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G923_XBOX_WHEEL),
+		.driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS },
 	{ /* Logitech G Pro Gaming Mouse over USB */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC088) },
 
@@ -4367,6 +4395,8 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* MX Ergo trackball over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01d) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01e) },
+	{ /* Signature M650 over Bluetooth */
+	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb02a) },
 	{ /* MX Master 3 mouse over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb023) },
 	{}