rtc-cmos: move wake setup from ACPI glue into RTC driver

Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver
in drivers/rtc/rtc-cmos.c.

This removes the ordering constraint between the module_init(acpi_rtc_init)
and the cmos_do_probe() code that depends on it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Bjorn Helgaas 2008-10-14 13:50:21 -06:00 committed by Linus Torvalds
parent 8acd3a60bc
commit a474aaedac
2 changed files with 89 additions and 112 deletions

View File

@ -260,115 +260,3 @@ static int __init init_acpi_device_notify(void)
}
arch_initcall(init_acpi_device_notify);
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
#ifdef CONFIG_PM
static u32 rtc_handler(void *context)
{
acpi_clear_event(ACPI_EVENT_RTC);
acpi_disable_event(ACPI_EVENT_RTC, 0);
return ACPI_INTERRUPT_HANDLED;
}
static inline void rtc_wake_setup(void)
{
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
/*
* After the RTC handler is installed, the Fixed_RTC event should
* be disabled. Only when the RTC alarm is set will it be enabled.
*/
acpi_clear_event(ACPI_EVENT_RTC);
acpi_disable_event(ACPI_EVENT_RTC, 0);
}
static void rtc_wake_on(struct device *dev)
{
acpi_clear_event(ACPI_EVENT_RTC);
acpi_enable_event(ACPI_EVENT_RTC, 0);
}
static void rtc_wake_off(struct device *dev)
{
acpi_disable_event(ACPI_EVENT_RTC, 0);
}
#else
#define rtc_wake_setup() do{}while(0)
#define rtc_wake_on NULL
#define rtc_wake_off NULL
#endif
/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find
* its device node and pass extra config data. This helps its driver use
* capabilities that the now-obsolete mc146818 didn't have, and informs it
* that this board's RTC is wakeup-capable (per ACPI spec).
*/
#include <linux/mc146818rtc.h>
static struct cmos_rtc_board_info rtc_info;
/* PNP devices are registered in a subsys_initcall();
* ACPI specifies the PNP IDs to use.
*/
#include <linux/pnp.h>
static int __init pnp_match(struct device *dev, void *data)
{
static const char *ids[] = { "PNP0b00", "PNP0b01", "PNP0b02", };
struct pnp_dev *pnp = to_pnp_dev(dev);
int i;
for (i = 0; i < ARRAY_SIZE(ids); i++) {
if (compare_pnp_id(pnp->id, ids[i]) != 0)
return 1;
}
return 0;
}
static struct device *__init get_rtc_dev(void)
{
return bus_find_device(&pnp_bus_type, NULL, NULL, pnp_match);
}
static int __init acpi_rtc_init(void)
{
struct device *dev = get_rtc_dev();
if (acpi_disabled)
return 0;
if (dev) {
rtc_wake_setup();
rtc_info.wake_on = rtc_wake_on;
rtc_info.wake_off = rtc_wake_off;
/* workaround bug in some ACPI tables */
if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
DBG("bogus FADT month_alarm\n");
acpi_gbl_FADT.month_alarm = 0;
}
rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
rtc_info.rtc_century = acpi_gbl_FADT.century;
/* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */
if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
printk(PREFIX "RTC can wake from S4\n");
dev->platform_data = &rtc_info;
/* RTC always wakes from S1/S2/S3, and often S4/STD */
device_init_wakeup(dev, 1);
put_device(dev);
} else
DBG("RTC unavailable?\n");
return 0;
}
module_init(acpi_rtc_init);
#endif

View File

@ -913,6 +913,92 @@ static inline int cmos_poweroff(struct device *dev)
* predate even PNPBIOS should set up platform_bus devices.
*/
#ifdef CONFIG_ACPI
#include <linux/acpi.h>
#ifdef CONFIG_PM
static u32 rtc_handler(void *context)
{
acpi_clear_event(ACPI_EVENT_RTC);
acpi_disable_event(ACPI_EVENT_RTC, 0);
return ACPI_INTERRUPT_HANDLED;
}
static inline void rtc_wake_setup(void)
{
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
/*
* After the RTC handler is installed, the Fixed_RTC event should
* be disabled. Only when the RTC alarm is set will it be enabled.
*/
acpi_clear_event(ACPI_EVENT_RTC);
acpi_disable_event(ACPI_EVENT_RTC, 0);
}
static void rtc_wake_on(struct device *dev)
{
acpi_clear_event(ACPI_EVENT_RTC);
acpi_enable_event(ACPI_EVENT_RTC, 0);
}
static void rtc_wake_off(struct device *dev)
{
acpi_disable_event(ACPI_EVENT_RTC, 0);
}
#else
#define rtc_wake_setup() do{}while(0)
#define rtc_wake_on NULL
#define rtc_wake_off NULL
#endif
/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find
* its device node and pass extra config data. This helps its driver use
* capabilities that the now-obsolete mc146818 didn't have, and informs it
* that this board's RTC is wakeup-capable (per ACPI spec).
*/
static struct cmos_rtc_board_info acpi_rtc_info;
static void __devinit
cmos_wake_setup(struct device *dev)
{
if (acpi_disabled)
return;
rtc_wake_setup();
acpi_rtc_info.wake_on = rtc_wake_on;
acpi_rtc_info.wake_off = rtc_wake_off;
/* workaround bug in some ACPI tables */
if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
acpi_gbl_FADT.month_alarm);
acpi_gbl_FADT.month_alarm = 0;
}
acpi_rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
acpi_rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
acpi_rtc_info.rtc_century = acpi_gbl_FADT.century;
/* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */
if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
dev_info(dev, "RTC can wake from S4\n");
dev->platform_data = &acpi_rtc_info;
/* RTC always wakes from S1/S2/S3, and often S4/STD */
device_init_wakeup(dev, 1);
}
#else
static void __devinit
cmos_wake_setup(struct device *dev)
{
}
#endif
#ifdef CONFIG_PNP
#include <linux/pnp.h>
@ -920,6 +1006,8 @@ static inline int cmos_poweroff(struct device *dev)
static int __devinit
cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
cmos_wake_setup(&pnp->dev);
if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
/* Some machines contain a PNP entry for the RTC, but
* don't define the IRQ. It should always be safe to
@ -997,6 +1085,7 @@ static struct pnp_driver cmos_pnp_driver = {
static int __init cmos_platform_probe(struct platform_device *pdev)
{
cmos_wake_setup(&pdev->dev);
return cmos_do_probe(&pdev->dev,
platform_get_resource(pdev, IORESOURCE_IO, 0),
platform_get_irq(pdev, 0));