PCI: rcar: Add gen2 fallback compatibility string for pcie-rcar

Add fallback compatibility string for R-Car Gen 2 family.  This is in
keeping with the fallback scheme being adopted wherever appropriate for
drivers for Renesas SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This commit is contained in:
Simon Horman 2015-12-03 07:51:39 +09:00 committed by Bjorn Helgaas
parent 3517652fda
commit a37b3eafe8
2 changed files with 12 additions and 4 deletions

View File

@ -1,9 +1,16 @@
* Renesas RCar PCIe interface
Required properties:
- compatible: should contain one of the following
"renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791",
"renesas,pcie-r8a7795"
compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
"renesas,pcie-r8a7795" for the R8A7795 SoC;
"renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
followed by the generic version.
- reg: base address and length of the pcie controller registers.
- #address-cells: set to <3>
- #size-cells: set to <2>
@ -26,7 +33,7 @@ Example:
SoC specific DT Entry:
pcie: pcie@fe000000 {
compatible = "renesas,pcie-r8a7791";
compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
reg = <0 0xfe000000 0 0x80000>;
#address-cells = <3>;
#size-cells = <2>;

View File

@ -915,6 +915,7 @@ static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie,
static const struct of_device_id rcar_pcie_of_match[] = {
{ .compatible = "renesas,pcie-r8a7779", .data = rcar_pcie_hw_init_h1 },
{ .compatible = "renesas,pcie-rcar-gen2", .data = rcar_pcie_hw_init },
{ .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init },
{ .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init },
{ .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init },