mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
Bluetooth: btrtl: Add the support for RTL8922A
Add the support for RTL8922A BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8922 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C885A01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit is contained in:
parent
0519376db7
commit
a30ce29920
@ -30,6 +30,7 @@
|
||||
#define RTL_ROM_LMP_8822B 0x8822
|
||||
#define RTL_ROM_LMP_8852A 0x8852
|
||||
#define RTL_ROM_LMP_8851B 0x8851
|
||||
#define RTL_ROM_LMP_8922A 0x8922
|
||||
#define RTL_CONFIG_MAGIC 0x8723ab55
|
||||
|
||||
#define RTL_VSC_OP_COREDUMP 0xfcff
|
||||
@ -69,6 +70,7 @@ enum btrtl_chip_id {
|
||||
CHIP_ID_8852B = 20,
|
||||
CHIP_ID_8852C = 25,
|
||||
CHIP_ID_8851B = 36,
|
||||
CHIP_ID_8922A = 44,
|
||||
CHIP_ID_8852BT = 47,
|
||||
};
|
||||
|
||||
@ -309,6 +311,15 @@ static const struct id_table ic_id_table[] = {
|
||||
.cfg_name = "rtl_bt/rtl8851bu_config",
|
||||
.hw_info = "rtl8851bu" },
|
||||
|
||||
/* 8922A */
|
||||
{ IC_INFO(RTL_ROM_LMP_8922A, 0xa, 0xc, HCI_USB),
|
||||
.config_needed = false,
|
||||
.has_rom_version = true,
|
||||
.has_msft_ext = true,
|
||||
.fw_name = "rtl_bt/rtl8922au_fw",
|
||||
.cfg_name = "rtl_bt/rtl8922au_config",
|
||||
.hw_info = "rtl8922au" },
|
||||
|
||||
/* 8852BT/8852BE-VT */
|
||||
{ IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB),
|
||||
.config_needed = false,
|
||||
@ -655,6 +666,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
|
||||
{ RTL_ROM_LMP_8852A, 20 }, /* 8852B */
|
||||
{ RTL_ROM_LMP_8852A, 25 }, /* 8852C */
|
||||
{ RTL_ROM_LMP_8851B, 36 }, /* 8851B */
|
||||
{ RTL_ROM_LMP_8922A, 44 }, /* 8922A */
|
||||
{ RTL_ROM_LMP_8852A, 47 }, /* 8852BT */
|
||||
};
|
||||
|
||||
@ -1255,6 +1267,7 @@ int btrtl_download_firmware(struct hci_dev *hdev,
|
||||
case RTL_ROM_LMP_8852A:
|
||||
case RTL_ROM_LMP_8703B:
|
||||
case RTL_ROM_LMP_8851B:
|
||||
case RTL_ROM_LMP_8922A:
|
||||
err = btrtl_setup_rtl8723b(hdev, btrtl_dev);
|
||||
break;
|
||||
default:
|
||||
@ -1286,6 +1299,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
|
||||
case CHIP_ID_8852B:
|
||||
case CHIP_ID_8852C:
|
||||
case CHIP_ID_8851B:
|
||||
case CHIP_ID_8922A:
|
||||
case CHIP_ID_8852BT:
|
||||
set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
|
||||
|
||||
@ -1528,3 +1542,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin");
|
||||
MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
|
||||
MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
|
||||
MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
|
||||
MODULE_FIRMWARE("rtl_bt/rtl8922au_fw.bin");
|
||||
MODULE_FIRMWARE("rtl_bt/rtl8922au_config.bin");
|
||||
|
@ -530,6 +530,17 @@ static const struct usb_device_id quirks_table[] = {
|
||||
/* Realtek 8852BT/8852BE-VT Bluetooth devices */
|
||||
{ USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |
|
||||
BTUSB_WIDEBAND_SPEECH },
|
||||
|
||||
/* Realtek 8922AE Bluetooth devices */
|
||||
{ USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
|
||||
BTUSB_WIDEBAND_SPEECH },
|
||||
{ USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK |
|
||||
BTUSB_WIDEBAND_SPEECH },
|
||||
{ USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK |
|
||||
BTUSB_WIDEBAND_SPEECH },
|
||||
{ USB_DEVICE(0x0489, 0xe130), .driver_info = BTUSB_REALTEK |
|
||||
BTUSB_WIDEBAND_SPEECH },
|
||||
|
||||
/* Realtek Bluetooth devices */
|
||||
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
|
||||
.driver_info = BTUSB_REALTEK },
|
||||
|
Loading…
Reference in New Issue
Block a user