hwmon: Remove unnecessary semicolons

Semicolons after closing } of conditional blocks are not needed
and can be removed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Guenter Roeck 2013-03-29 13:54:50 -07:00
parent 61e6cfa80d
commit a039371353
2 changed files with 9 additions and 9 deletions

View File

@ -616,7 +616,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
data->gpio = gpio;
data->last_reading = jiffies;
}; /* last_reading */
} /* last_reading */
if (!data->valid ||
time_after(jiffies, data->last_config + ADM1026_CONFIG_INTERVAL)) {
@ -700,7 +700,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
}
data->last_config = jiffies;
}; /* last_config */
} /* last_config */
data->valid = 1;
mutex_unlock(&data->update_lock);
@ -1791,7 +1791,7 @@ static int adm1026_detect(struct i2c_client *client,
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
/* We need to be able to do byte I/O */
return -ENODEV;
};
}
/* Now, we do the remaining detection. */

View File

@ -138,7 +138,7 @@ static inline u8 read_byte(struct i2c_client *client, u8 reg)
dev_err(&client->dev,
"Unable to read from register 0x%02x.\n", reg);
return 0;
};
}
return res & 0xff;
}
@ -149,7 +149,7 @@ static inline int write_byte(struct i2c_client *client, u8 reg, u8 data)
dev_err(&client->dev,
"Unable to write value 0x%02x to register 0x%02x.\n",
data, reg);
};
}
return res;
}
@ -1030,7 +1030,7 @@ static struct asc7621_data *asc7621_update_device(struct device *dev)
}
}
data->last_high_reading = jiffies;
}; /* last_reading */
} /* last_reading */
/* Read all the low priority registers. */
@ -1044,7 +1044,7 @@ static struct asc7621_data *asc7621_update_device(struct device *dev)
}
}
data->last_low_reading = jiffies;
}; /* last_reading */
} /* last_reading */
data->valid = 1;
@ -1084,11 +1084,11 @@ static void asc7621_init_client(struct i2c_client *client)
dev_err(&client->dev,
"Client (%d,0x%02x) config is locked.\n",
i2c_adapter_id(client->adapter), client->addr);
};
}
if (!(value & 0x04)) {
dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
i2c_adapter_id(client->adapter), client->addr);
};
}
/*
* Start monitoring