sh: SH-DMAC compile fixes

This patch does the following:
- remove the make_ipr_irq stuff from dma-sh.c and replace it
  with a simple channel<->irq mapping table.
- add DMTEx_IRQ constants for sh4 cpus
- fix sh7751 DMAE irq number

The SH7780 uses the same IRQs for DMA as other SH4 types, so
I put the constants on top of the dma.h file.

Other CPU types need to #define their own DMTEx_IRQ contants
in their appropriate header.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Manuel Lauss 2007-01-25 15:22:11 +09:00 committed by Paul Mundt
parent 6dcda6f1ec
commit 9f8a5e3a44
3 changed files with 28 additions and 30 deletions

View File

@ -19,34 +19,26 @@
#include <asm/io.h>
#include "dma-sh.h"
#ifdef CONFIG_CPU_SH4
static struct ipr_data dmae_ipr_map[] = {
{ DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
};
static int dmte_irq_map[] = {
DMTE0_IRQ,
DMTE1_IRQ,
DMTE2_IRQ,
DMTE3_IRQ,
#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
defined(CONFIG_CPU_SUBTYPE_SH7760) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
DMTE4_IRQ,
DMTE5_IRQ,
DMTE6_IRQ,
DMTE7_IRQ,
#endif
static struct ipr_data dmte_ipr_map[] = {
/*
* Normally we could just do DMTE0_IRQ + chan outright, though in the
* case of the 7751R, the DMTE IRQs for channels > 4 start right above
* the SCIF
*/
{ DMTE0_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE0_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE0_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE0_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE4_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE4_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE4_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE4_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
};
static inline unsigned int get_dmte_irq(unsigned int chan)
{
unsigned int irq = 0;
if (chan < ARRAY_SIZE(dmte_ipr_map))
irq = dmte_ipr_map[chan].irq;
if (chan < ARRAY_SIZE(dmte_irq_map))
irq = dmte_irq_map[chan];
return irq;
}
@ -103,7 +95,7 @@ static void sh_dmac_free_dma(struct dma_channel *chan)
free_irq(get_dmte_irq(chan->chan), chan);
}
static void
static int
sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
{
if (!chcr)
@ -119,6 +111,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
ctrl_outl(chcr, CHCR[chan->chan]);
chan->flags |= DMA_CONFIGURED;
return 0;
}
static void sh_dmac_enable_dma(struct dma_channel *chan)
@ -262,17 +255,11 @@ static int __init sh_dmac_init(void)
int i;
#ifdef CONFIG_CPU_SH4
make_ipr_irq(dmae_ipr_map, ARRAY_SIZE(dmae_ipr_map));
i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
if (unlikely(i < 0))
return i;
#endif
i = info->nr_channels;
if (i > ARRAY_SIZE(dmte_ipr_map))
i = ARRAY_SIZE(dmte_ipr_map);
make_ipr_irq(dmte_ipr_map, i);
/*
* Initialize DMAOR, and clean up any error flags that may have
* been set.

View File

@ -101,7 +101,7 @@ static struct ipr_data sh7750_ipr_map[] = {
{ 35, 2, 8, 7 }, /* DMAC DMTE1 */
{ 36, 2, 8, 7 }, /* DMAC DMTE2 */
{ 37, 2, 8, 7 }, /* DMAC DMTE3 */
{ 28, 2, 8, 7 }, /* DMAC DMAE */
{ 38, 2, 8, 7 }, /* DMAC DMAE */
};
static struct ipr_data sh7751_ipr_map[] = {

View File

@ -3,6 +3,17 @@
#define DMAOR_INIT ( 0x8000 | DMAOR_DME )
/* SH7751/7760/7780 DMA IRQ sources */
#define DMTE0_IRQ 34
#define DMTE1_IRQ 35
#define DMTE2_IRQ 36
#define DMTE3_IRQ 37
#define DMTE4_IRQ 44
#define DMTE5_IRQ 45
#define DMTE6_IRQ 46
#define DMTE7_IRQ 47
#define DMAE_IRQ 38
#ifdef CONFIG_CPU_SH4A
#define SH_DMAC_BASE 0xfc808020