diff --git a/MAINTAINERS b/MAINTAINERS
index 256f03904987..d5d6d5a68f4d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7789,7 +7789,6 @@ F:	Documentation/admin-guide/efi-stub.rst
 F:	arch/*/include/asm/efi.h
 F:	arch/*/kernel/efi.c
 F:	arch/arm/boot/compressed/efi-header.S
-F:	arch/arm64/kernel/efi-entry.S
 F:	arch/x86/platform/efi/
 F:	drivers/firmware/efi/
 F:	include/linux/efi*.h
diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
index 4bdd930167c0..b95241b1ca65 100644
--- a/arch/arm/include/asm/efi.h
+++ b/arch/arm/include/asm/efi.h
@@ -43,9 +43,6 @@ void efi_virtmap_unload(void);
 
 /* arch specific definitions used by the stub code */
 
-struct screen_info *alloc_screen_info(void);
-void free_screen_info(struct screen_info *si);
-
 /*
  * A reasonable upper bound for the uncompressed kernel size is 32 MBytes,
  * so we will reserve that amount of memory. We have no easy way to tell what
diff --git a/arch/arm/kernel/efi.c b/arch/arm/kernel/efi.c
index e50ad7eefc02..882104f43b3b 100644
--- a/arch/arm/kernel/efi.c
+++ b/arch/arm/kernel/efi.c
@@ -75,38 +75,13 @@ int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 	return 0;
 }
 
-static unsigned long __initdata screen_info_table = EFI_INVALID_TABLE_ADDR;
 static unsigned long __initdata cpu_state_table = EFI_INVALID_TABLE_ADDR;
 
 const efi_config_table_type_t efi_arch_tables[] __initconst = {
-	{LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID, &screen_info_table},
 	{LINUX_EFI_ARM_CPU_STATE_TABLE_GUID, &cpu_state_table},
 	{}
 };
 
-static void __init load_screen_info_table(void)
-{
-	struct screen_info *si;
-
-	if (screen_info_table != EFI_INVALID_TABLE_ADDR) {
-		si = early_memremap_ro(screen_info_table, sizeof(*si));
-		if (!si) {
-			pr_err("Could not map screen_info config table\n");
-			return;
-		}
-		screen_info = *si;
-		early_memunmap(si, sizeof(*si));
-
-		/* dummycon on ARM needs non-zero values for columns/lines */
-		screen_info.orig_video_cols = 80;
-		screen_info.orig_video_lines = 25;
-
-		if (memblock_is_map_memory(screen_info.lfb_base))
-			memblock_mark_nomap(screen_info.lfb_base,
-					    screen_info.lfb_size);
-	}
-}
-
 static void __init load_cpu_state_table(void)
 {
 	if (cpu_state_table != EFI_INVALID_TABLE_ADDR) {
@@ -145,7 +120,11 @@ void __init arm_efi_init(void)
 {
 	efi_init();
 
-	load_screen_info_table();
+	if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI) {
+		/* dummycon on ARM needs non-zero values for columns/lines */
+		screen_info.orig_video_cols = 80;
+		screen_info.orig_video_lines = 25;
+	}
 
 	/* ARM does not permit early mappings to persist across paging_init() */
 	efi_memmap_unmap();
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index d6cf535d8352..925364586672 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -84,10 +84,19 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long image_addr)
 	return (image_addr & ~(SZ_1G - 1UL)) + (1UL << (VA_BITS_MIN - 1));
 }
 
-#define alloc_screen_info(x...)		&screen_info
-
-static inline void free_screen_info(struct screen_info *si)
+static inline unsigned long efi_get_kimg_min_align(void)
 {
+	extern bool efi_nokaslr;
+
+	/*
+	 * Although relocatable kernels can fix up the misalignment with
+	 * respect to MIN_KIMG_ALIGN, the resulting virtual text addresses are
+	 * subtly out of sync with those recorded in the vmlinux when kaslr is
+	 * disabled but the image required relocation anyway. Therefore retain
+	 * 2M alignment if KASLR was explicitly disabled, even if it was not
+	 * going to be activated to begin with.
+	 */
+	return efi_nokaslr ? MIN_KIMG_ALIGN : EFI_KIMG_ALIGN;
 }
 
 #define EFI_ALLOC_ALIGN		SZ_64K
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 2f361a883d8c..2a3b0e4950f2 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -36,12 +36,6 @@ obj-y			:= debug-monitors.o entry.o irq.o fpsimd.o		\
 			   syscall.o proton-pack.o idreg-override.o idle.o	\
 			   patching.o
 
-targets			+= efi-entry.o
-
-OBJCOPYFLAGS := --prefix-symbols=__efistub_
-$(obj)/%.stub.o: $(obj)/%.o FORCE
-	$(call if_changed,objcopy)
-
 obj-$(CONFIG_COMPAT)			+= sys32.o signal32.o			\
 					   sys_compat.o
 obj-$(CONFIG_COMPAT)			+= sigreturn32.o
@@ -57,8 +51,7 @@ obj-$(CONFIG_CPU_PM)			+= sleep.o suspend.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 obj-$(CONFIG_KGDB)			+= kgdb.o
-obj-$(CONFIG_EFI)			+= efi.o efi-entry.stub.o		\
-					   efi-rt-wrapper.o
+obj-$(CONFIG_EFI)			+= efi.o efi-rt-wrapper.o
 obj-$(CONFIG_PCI)			+= pci.o
 obj-$(CONFIG_ARMV8_DEPRECATED)		+= armv8_deprecated.o
 obj-$(CONFIG_ACPI)			+= acpi.o
diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S
deleted file mode 100644
index 61a87fa1c305..000000000000
--- a/arch/arm64/kernel/efi-entry.S
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * EFI entry point.
- *
- * Copyright (C) 2013, 2014 Red Hat, Inc.
- * Author: Mark Salter <msalter@redhat.com>
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-#include <asm/assembler.h>
-
-	__INIT
-
-SYM_CODE_START(efi_enter_kernel)
-	/*
-	 * efi_pe_entry() will have copied the kernel image if necessary and we
-	 * end up here with device tree address in x1 and the kernel entry
-	 * point stored in x0. Save those values in registers which are
-	 * callee preserved.
-	 */
-	ldr	w2, =primary_entry_offset
-	add	x19, x0, x2		// relocated Image entrypoint
-	mov	x20, x1			// DTB address
-
-	/*
-	 * Clean the copied Image to the PoC, and ensure it is not shadowed by
-	 * stale icache entries from before relocation.
-	 */
-	ldr	w1, =kernel_size
-	add	x1, x0, x1
-	bl	dcache_clean_poc
-	ic	ialluis
-
-	/*
-	 * Clean the remainder of this routine to the PoC
-	 * so that we can safely disable the MMU and caches.
-	 */
-	adr	x0, 0f
-	adr	x1, 3f
-	bl	dcache_clean_poc
-0:
-	/* Turn off Dcache and MMU */
-	mrs	x0, CurrentEL
-	cmp	x0, #CurrentEL_EL2
-	b.ne	1f
-	mrs	x0, sctlr_el2
-	bic	x0, x0, #1 << 0	// clear SCTLR.M
-	bic	x0, x0, #1 << 2	// clear SCTLR.C
-	pre_disable_mmu_workaround
-	msr	sctlr_el2, x0
-	isb
-	b	2f
-1:
-	mrs	x0, sctlr_el1
-	bic	x0, x0, #1 << 0	// clear SCTLR.M
-	bic	x0, x0, #1 << 2	// clear SCTLR.C
-	pre_disable_mmu_workaround
-	msr	sctlr_el1, x0
-	isb
-2:
-	/* Jump to kernel entry point */
-	mov	x0, x20
-	mov	x1, xzr
-	mov	x2, xzr
-	mov	x3, xzr
-	br	x19
-3:
-SYM_CODE_END(efi_enter_kernel)
diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h
index 8151412653de..f31130ba0233 100644
--- a/arch/arm64/kernel/image-vars.h
+++ b/arch/arm64/kernel/image-vars.h
@@ -10,7 +10,6 @@
 #error This file should only be included in vmlinux.lds.S
 #endif
 
-PROVIDE(__efistub_kernel_size		= _edata - _text);
 PROVIDE(__efistub_primary_entry_offset	= primary_entry - _text);
 
 /*
@@ -22,13 +21,6 @@ PROVIDE(__efistub_primary_entry_offset	= primary_entry - _text);
  * linked at. The routines below are all implemented in assembler in a
  * position independent manner
  */
-PROVIDE(__efistub_memcmp		= __pi_memcmp);
-PROVIDE(__efistub_memchr		= __pi_memchr);
-PROVIDE(__efistub_strlen		= __pi_strlen);
-PROVIDE(__efistub_strnlen		= __pi_strnlen);
-PROVIDE(__efistub_strcmp		= __pi_strcmp);
-PROVIDE(__efistub_strncmp		= __pi_strncmp);
-PROVIDE(__efistub_strrchr		= __pi_strrchr);
 PROVIDE(__efistub_dcache_clean_poc	= __pi_dcache_clean_poc);
 
 PROVIDE(__efistub__text			= _text);
diff --git a/arch/loongarch/include/asm/efi.h b/arch/loongarch/include/asm/efi.h
index 174567b00ddb..97f16e60c6ff 100644
--- a/arch/loongarch/include/asm/efi.h
+++ b/arch/loongarch/include/asm/efi.h
@@ -19,18 +19,18 @@ void efifb_setup_from_dmi(struct screen_info *si, const char *opt);
 #define EFI_ALLOC_ALIGN		SZ_64K
 #define EFI_RT_VIRTUAL_OFFSET	CSR_DMW0_BASE
 
-static inline struct screen_info *alloc_screen_info(void)
-{
-	return &screen_info;
-}
-
-static inline void free_screen_info(struct screen_info *si)
-{
-}
-
 static inline unsigned long efi_get_max_initrd_addr(unsigned long image_addr)
 {
 	return ULONG_MAX;
 }
 
+static inline unsigned long efi_get_kimg_min_align(void)
+{
+	return SZ_2M;
+}
+
+#define EFI_KIMG_PREFERRED_ADDRESS	PHYSADDR(VMLINUX_LOAD_ADDRESS)
+
+unsigned long kernel_entry_address(void);
+
 #endif /* _ASM_LOONGARCH_EFI_H */
diff --git a/arch/loongarch/kernel/efi.c b/arch/loongarch/kernel/efi.c
index a31329971133..d75ce73e8ff8 100644
--- a/arch/loongarch/kernel/efi.c
+++ b/arch/loongarch/kernel/efi.c
@@ -52,6 +52,27 @@ void __init efi_runtime_init(void)
 	set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
 }
 
+unsigned long __initdata screen_info_table = EFI_INVALID_TABLE_ADDR;
+
+static void __init init_screen_info(void)
+{
+	struct screen_info *si;
+
+	if (screen_info_table == EFI_INVALID_TABLE_ADDR)
+		return;
+
+	si = early_memremap(screen_info_table, sizeof(*si));
+	if (!si) {
+		pr_err("Could not map screen_info config table\n");
+		return;
+	}
+	screen_info = *si;
+	memset(si, 0, sizeof(*si));
+	early_memunmap(si, sizeof(*si));
+
+	memblock_reserve(screen_info.lfb_base, screen_info.lfb_size);
+}
+
 void __init efi_init(void)
 {
 	int size;
@@ -80,8 +101,7 @@ void __init efi_init(void)
 
 	set_bit(EFI_CONFIG_TABLES, &efi.flags);
 
-	if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI)
-		memblock_reserve(screen_info.lfb_base, screen_info.lfb_size);
+	init_screen_info();
 
 	if (boot_memmap == EFI_INVALID_TABLE_ADDR)
 		return;
diff --git a/arch/loongarch/kernel/image-vars.h b/arch/loongarch/kernel/image-vars.h
index 88f5d81702df..e561989d02de 100644
--- a/arch/loongarch/kernel/image-vars.h
+++ b/arch/loongarch/kernel/image-vars.h
@@ -7,15 +7,7 @@
 
 #ifdef CONFIG_EFI_STUB
 
-__efistub_memcmp		= memcmp;
-__efistub_memchr		= memchr;
-__efistub_strcat		= strcat;
 __efistub_strcmp		= strcmp;
-__efistub_strlen		= strlen;
-__efistub_strncat		= strncat;
-__efistub_strnstr		= strnstr;
-__efistub_strnlen		= strnlen;
-__efistub_strrchr		= strrchr;
 __efistub_kernel_entry		= kernel_entry;
 __efistub_kernel_asize		= kernel_asize;
 __efistub_kernel_fsize		= kernel_fsize;
diff --git a/arch/riscv/include/asm/efi.h b/arch/riscv/include/asm/efi.h
index f74879a8f1ea..6cbc7437d886 100644
--- a/arch/riscv/include/asm/efi.h
+++ b/arch/riscv/include/asm/efi.h
@@ -31,13 +31,20 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long image_addr)
 	return ULONG_MAX;
 }
 
-#define alloc_screen_info(x...)		(&screen_info)
-
-static inline void free_screen_info(struct screen_info *si)
+static inline unsigned long efi_get_kimg_min_align(void)
 {
+	/*
+	 * RISC-V requires the kernel image to placed 2 MB aligned base for 64
+	 * bit and 4MB for 32 bit.
+	 */
+	return IS_ENABLED(CONFIG_64BIT) ? SZ_2M : SZ_4M;
 }
 
+#define EFI_KIMG_PREFERRED_ADDRESS	efi_get_kimg_min_align()
+
 void efi_virtmap_load(void);
 void efi_virtmap_unload(void);
 
+unsigned long stext_offset(void);
+
 #endif /* _ASM_EFI_H */
diff --git a/arch/riscv/kernel/image-vars.h b/arch/riscv/kernel/image-vars.h
index d6e5f739905e..7e2962ef73f9 100644
--- a/arch/riscv/kernel/image-vars.h
+++ b/arch/riscv/kernel/image-vars.h
@@ -23,13 +23,7 @@
  * linked at. The routines below are all implemented in assembler in a
  * position independent manner
  */
-__efistub_memcmp		= memcmp;
-__efistub_memchr		= memchr;
-__efistub_strlen		= strlen;
-__efistub_strnlen		= strnlen;
 __efistub_strcmp		= strcmp;
-__efistub_strncmp		= strncmp;
-__efistub_strrchr		= strrchr;
 
 __efistub__start		= _start;
 __efistub__start_kernel		= _start_kernel;
diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c
index 2fd770b499a3..1639159493e3 100644
--- a/drivers/firmware/efi/efi-init.c
+++ b/drivers/firmware/efi/efi-init.c
@@ -22,6 +22,8 @@
 
 #include <asm/efi.h>
 
+unsigned long __initdata screen_info_table = EFI_INVALID_TABLE_ADDR;
+
 static int __init is_memory(efi_memory_desc_t *md)
 {
 	if (md->attribute & (EFI_MEMORY_WB|EFI_MEMORY_WT|EFI_MEMORY_WC))
@@ -55,9 +57,22 @@ extern __weak const efi_config_table_type_t efi_arch_tables[];
 
 static void __init init_screen_info(void)
 {
-	if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI &&
-	    memblock_is_map_memory(screen_info.lfb_base))
-		memblock_mark_nomap(screen_info.lfb_base, screen_info.lfb_size);
+	struct screen_info *si;
+
+	if (screen_info_table != EFI_INVALID_TABLE_ADDR) {
+		si = early_memremap(screen_info_table, sizeof(*si));
+		if (!si) {
+			pr_err("Could not map screen_info config table\n");
+			return;
+		}
+		screen_info = *si;
+		memset(si, 0, sizeof(*si));
+		early_memunmap(si, sizeof(*si));
+
+		if (memblock_is_map_memory(screen_info.lfb_base))
+			memblock_mark_nomap(screen_info.lfb_base,
+					    screen_info.lfb_size);
+	}
 }
 
 static int __init uefi_init(u64 efi_system_table)
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index a46df5d1d094..951a42d27cf4 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -58,6 +58,8 @@ static unsigned long __initdata mem_reserve = EFI_INVALID_TABLE_ADDR;
 static unsigned long __initdata rt_prop = EFI_INVALID_TABLE_ADDR;
 static unsigned long __initdata initrd = EFI_INVALID_TABLE_ADDR;
 
+extern unsigned long screen_info_table;
+
 struct mm_struct efi_mm = {
 	.mm_mt			= MTREE_INIT_EXT(mm_mt, MM_MT_FLAGS, efi_mm.mmap_lock),
 	.mm_users		= ATOMIC_INIT(2),
@@ -546,6 +548,9 @@ static const efi_config_table_type_t common_tables[] __initconst = {
 #endif
 #ifdef CONFIG_EFI_COCO_SECRET
 	{LINUX_EFI_COCO_SECRET_AREA_GUID,	&efi.coco_secret,	"CocoSecret"	},
+#endif
+#ifdef CONFIG_EFI_GENERIC_STUB
+	{LINUX_EFI_SCREEN_INFO_TABLE_GUID,	&screen_info_table			},
 #endif
 	{},
 };
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index ef5045a53ce0..e19dd1106fa1 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -5,6 +5,10 @@
 # things like ftrace and stack-protector are likely to cause trouble if left
 # enabled, even if doing so doesn't break the build.
 #
+
+# non-x86 reuses KBUILD_CFLAGS, x86 does not
+cflags-y			:= $(KBUILD_CFLAGS)
+
 cflags-$(CONFIG_X86_32)		:= -march=i386
 cflags-$(CONFIG_X86_64)		:= -mcmodel=small
 cflags-$(CONFIG_X86)		+= -m$(BITS) -D__KERNEL__ \
@@ -18,20 +22,19 @@ cflags-$(CONFIG_X86)		+= -m$(BITS) -D__KERNEL__ \
 
 # arm64 uses the full KBUILD_CFLAGS so it's necessary to explicitly
 # disable the stackleak plugin
-cflags-$(CONFIG_ARM64)		:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
-				   -fpie $(DISABLE_STACKLEAK_PLUGIN) \
+cflags-$(CONFIG_ARM64)		+= -fpie $(DISABLE_STACKLEAK_PLUGIN) \
 				   $(call cc-option,-mbranch-protection=none)
-cflags-$(CONFIG_ARM)		:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
-				   -fno-builtin -fpic \
+cflags-$(CONFIG_ARM)		+= -DEFI_HAVE_STRLEN -DEFI_HAVE_STRNLEN \
+				   -DEFI_HAVE_MEMCHR -DEFI_HAVE_STRRCHR \
+				   -DEFI_HAVE_STRCMP -fno-builtin -fpic \
 				   $(call cc-option,-mno-single-pic-base)
-cflags-$(CONFIG_RISCV)		:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
-				   -fpic
-cflags-$(CONFIG_LOONGARCH)	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
-				   -fpie
+cflags-$(CONFIG_RISCV)		+= -fpic
+cflags-$(CONFIG_LOONGARCH)	+= -fpie
 
 cflags-$(CONFIG_EFI_PARAMS_FROM_FDT)	+= -I$(srctree)/scripts/dtc/libfdt
 
-KBUILD_CFLAGS			:= $(cflags-y) -Os -DDISABLE_BRANCH_PROFILING \
+KBUILD_CFLAGS			:= $(subst $(CC_FLAGS_FTRACE),,$(cflags-y)) \
+				   -Os -DDISABLE_BRANCH_PROFILING \
 				   -include $(srctree)/include/linux/hidden.h \
 				   -D__NO_FORTIFY \
 				   -ffreestanding \
@@ -67,7 +70,7 @@ KCOV_INSTRUMENT			:= n
 lib-y				:= efi-stub-helper.o gop.o secureboot.o tpm.o \
 				   file.o mem.o random.o randomalloc.o pci.o \
 				   skip_spaces.o lib-cmdline.o lib-ctype.o \
-				   alignedmem.o relocate.o vsprintf.o
+				   alignedmem.o relocate.o printk.o vsprintf.o
 
 # include the stub's libfdt dependencies from lib/ when needed
 libfdt-deps			:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c \
@@ -79,13 +82,14 @@ lib-$(CONFIG_EFI_PARAMS_FROM_FDT) += fdt.o \
 $(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
 	$(call if_changed_rule,cc_o_c)
 
-lib-$(CONFIG_EFI_GENERIC_STUB)	+= efi-stub.o string.o intrinsics.o systable.o
+lib-$(CONFIG_EFI_GENERIC_STUB)	+= efi-stub.o string.o intrinsics.o systable.o \
+				   screen_info.o efi-stub-entry.o
 
 lib-$(CONFIG_ARM)		+= arm32-stub.o
-lib-$(CONFIG_ARM64)		+= arm64-stub.o smbios.o
+lib-$(CONFIG_ARM64)		+= arm64.o arm64-stub.o arm64-entry.o smbios.o
 lib-$(CONFIG_X86)		+= x86-stub.o
-lib-$(CONFIG_RISCV)		+= riscv-stub.o
-lib-$(CONFIG_LOONGARCH)		+= loongarch-stub.o
+lib-$(CONFIG_RISCV)		+= riscv.o riscv-stub.o
+lib-$(CONFIG_LOONGARCH)		+= loongarch.o loongarch-stub.o
 
 CFLAGS_arm32-stub.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 
@@ -136,7 +140,7 @@ STUBCOPY_RELOC-$(CONFIG_ARM)	:= R_ARM_ABS
 #
 STUBCOPY_FLAGS-$(CONFIG_ARM64)	+= --prefix-alloc-sections=.init \
 				   --prefix-symbols=__efistub_
-STUBCOPY_RELOC-$(CONFIG_ARM64)	:= R_AARCH64_ABS
+STUBCOPY_RELOC-$(CONFIG_ARM64)	:= R_AARCH64_ABS64
 
 # For RISC-V, we don't need anything special other than arm64. Keep all the
 # symbols in .init section and make sure that no absolute symbols references
diff --git a/drivers/firmware/efi/libstub/Makefile.zboot b/drivers/firmware/efi/libstub/Makefile.zboot
index 3340b385a05b..43e9a4cab9f5 100644
--- a/drivers/firmware/efi/libstub/Makefile.zboot
+++ b/drivers/firmware/efi/libstub/Makefile.zboot
@@ -10,18 +10,17 @@ comp-type-$(CONFIG_KERNEL_LZO)		:= lzo
 comp-type-$(CONFIG_KERNEL_XZ)		:= xzkern
 comp-type-$(CONFIG_KERNEL_ZSTD)		:= zstd22
 
-# in GZIP, the appended le32 carrying the uncompressed size is part of the
-# format, but in other cases, we just append it at the end for convenience,
-# causing the original tools to complain when checking image integrity.
-# So disregard it when calculating the payload size in the zimage header.
-zboot-method-y				:= $(comp-type-y)_with_size
-zboot-size-len-y			:= 4
-
-zboot-method-$(CONFIG_KERNEL_GZIP)	:= gzip
-zboot-size-len-$(CONFIG_KERNEL_GZIP)	:= 0
+# Copy the SizeOfHeaders, SizeOfCode and SizeOfImage fields from the payload to
+# the end of the compressed image. Note that this presupposes a PE header
+# offset of 64 bytes, which is what arm64, RISC-V and LoongArch use.
+quiet_cmd_compwithsize = $(quiet_cmd_$(comp-type-y))
+      cmd_compwithsize = $(cmd_$(comp-type-y)) && ( \
+			   dd status=none if=$< bs=4 count=1 skip=37 ; \
+			   dd status=none if=$< bs=4 count=1 skip=23 ; \
+			   dd status=none if=$< bs=4 count=1 skip=36 ) >> $@
 
 $(obj)/vmlinuz: $(obj)/$(EFI_ZBOOT_PAYLOAD) FORCE
-	$(call if_changed,$(zboot-method-y))
+	$(call if_changed,compwithsize)
 
 OBJCOPYFLAGS_vmlinuz.o := -I binary -O $(EFI_ZBOOT_BFD_TARGET) \
 			  --rename-section .data=.gzdata,load,alloc,readonly,contents
@@ -30,7 +29,6 @@ $(obj)/vmlinuz.o: $(obj)/vmlinuz FORCE
 
 AFLAGS_zboot-header.o += -DMACHINE_TYPE=IMAGE_FILE_MACHINE_$(EFI_ZBOOT_MACH_TYPE) \
 			 -DZBOOT_EFI_PATH="\"$(realpath $(obj)/vmlinuz.efi.elf)\"" \
-			 -DZBOOT_SIZE_LEN=$(zboot-size-len-y) \
 			 -DCOMP_TYPE="\"$(comp-type-y)\""
 
 $(obj)/zboot-header.o: $(srctree)/drivers/firmware/efi/libstub/zboot-header.S FORCE
@@ -46,4 +44,4 @@ OBJCOPYFLAGS_vmlinuz.efi := -O binary
 $(obj)/vmlinuz.efi: $(obj)/vmlinuz.efi.elf FORCE
 	$(call if_changed,objcopy)
 
-targets += zboot-header.o vmlinuz vmlinuz.o vmlinuz.efi.elf vmlinuz.efi
+targets += zboot-header.o vmlinuz.o vmlinuz.efi.elf vmlinuz.efi
diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c
index 0131e3aaa605..1073dd947516 100644
--- a/drivers/firmware/efi/libstub/arm32-stub.c
+++ b/drivers/firmware/efi/libstub/arm32-stub.c
@@ -76,43 +76,6 @@ void efi_handle_post_ebs_state(void)
 		      &efi_entry_state->sctlr_after_ebs);
 }
 
-static efi_guid_t screen_info_guid = LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID;
-
-struct screen_info *alloc_screen_info(void)
-{
-	struct screen_info *si;
-	efi_status_t status;
-
-	/*
-	 * Unlike on arm64, where we can directly fill out the screen_info
-	 * structure from the stub, we need to allocate a buffer to hold
-	 * its contents while we hand over to the kernel proper from the
-	 * decompressor.
-	 */
-	status = efi_bs_call(allocate_pool, EFI_RUNTIME_SERVICES_DATA,
-			     sizeof(*si), (void **)&si);
-
-	if (status != EFI_SUCCESS)
-		return NULL;
-
-	status = efi_bs_call(install_configuration_table,
-			     &screen_info_guid, si);
-	if (status == EFI_SUCCESS)
-		return si;
-
-	efi_bs_call(free_pool, si);
-	return NULL;
-}
-
-void free_screen_info(struct screen_info *si)
-{
-	if (!si)
-		return;
-
-	efi_bs_call(install_configuration_table, &screen_info_guid, NULL);
-	efi_bs_call(free_pool, si);
-}
-
 efi_status_t handle_kernel_image(unsigned long *image_addr,
 				 unsigned long *image_size,
 				 unsigned long *reserve_addr,
diff --git a/drivers/firmware/efi/libstub/arm64-entry.S b/drivers/firmware/efi/libstub/arm64-entry.S
new file mode 100644
index 000000000000..b5c17e89a4fc
--- /dev/null
+++ b/drivers/firmware/efi/libstub/arm64-entry.S
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * EFI entry point.
+ *
+ * Copyright (C) 2013, 2014 Red Hat, Inc.
+ * Author: Mark Salter <msalter@redhat.com>
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	/*
+	 * The entrypoint of a arm64 bare metal image is at offset #0 of the
+	 * image, so this is a reasonable default for primary_entry_offset.
+	 * Only when the EFI stub is integrated into the core kernel, it is not
+	 * guaranteed that the PE/COFF header has been copied to memory too, so
+	 * in this case, primary_entry_offset should be overridden by the
+	 * linker and point to primary_entry() directly.
+	 */
+	.weak	primary_entry_offset
+
+SYM_CODE_START(efi_enter_kernel)
+	/*
+	 * efi_pe_entry() will have copied the kernel image if necessary and we
+	 * end up here with device tree address in x1 and the kernel entry
+	 * point stored in x0. Save those values in registers which are
+	 * callee preserved.
+	 */
+	ldr	w2, =primary_entry_offset
+	add	x19, x0, x2		// relocated Image entrypoint
+
+	mov	x0, x1			// DTB address
+	mov	x1, xzr
+	mov	x2, xzr
+	mov	x3, xzr
+
+	/*
+	 * Clean the remainder of this routine to the PoC
+	 * so that we can safely disable the MMU and caches.
+	 */
+	adr	x4, 1f
+	dc	civac, x4
+	dsb	sy
+
+	/* Turn off Dcache and MMU */
+	mrs	x4, CurrentEL
+	cmp	x4, #CurrentEL_EL2
+	mrs	x4, sctlr_el1
+	b.ne	0f
+	mrs	x4, sctlr_el2
+0:	bic	x4, x4, #SCTLR_ELx_M
+	bic	x4, x4, #SCTLR_ELx_C
+	b.eq	1f
+	b	2f
+
+	.balign	32
+1:	pre_disable_mmu_workaround
+	msr	sctlr_el2, x4
+	isb
+	br	x19		// jump to kernel entrypoint
+
+2:	pre_disable_mmu_workaround
+	msr	sctlr_el1, x4
+	isb
+	br	x19		// jump to kernel entrypoint
+
+	.org	1b + 32
+SYM_CODE_END(efi_enter_kernel)
diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c
index f9de5217ea65..c14028b625b4 100644
--- a/drivers/firmware/efi/libstub/arm64-stub.c
+++ b/drivers/firmware/efi/libstub/arm64-stub.c
@@ -11,52 +11,9 @@
 #include <asm/efi.h>
 #include <asm/memory.h>
 #include <asm/sections.h>
-#include <asm/sysreg.h>
 
 #include "efistub.h"
 
-static bool system_needs_vamap(void)
-{
-	const u8 *type1_family = efi_get_smbios_string(1, family);
-
-	/*
-	 * Ampere Altra machines crash in SetTime() if SetVirtualAddressMap()
-	 * has not been called prior.
-	 */
-	if (!type1_family || strcmp(type1_family, "Altra"))
-		return false;
-
-	efi_warn("Working around broken SetVirtualAddressMap()\n");
-	return true;
-}
-
-efi_status_t check_platform_features(void)
-{
-	u64 tg;
-
-	/*
-	 * If we have 48 bits of VA space for TTBR0 mappings, we can map the
-	 * UEFI runtime regions 1:1 and so calling SetVirtualAddressMap() is
-	 * unnecessary.
-	 */
-	if (VA_BITS_MIN >= 48 && !system_needs_vamap())
-		efi_novamap = true;
-
-	/* UEFI mandates support for 4 KB granularity, no need to check */
-	if (IS_ENABLED(CONFIG_ARM64_4K_PAGES))
-		return EFI_SUCCESS;
-
-	tg = (read_cpuid(ID_AA64MMFR0_EL1) >> ID_AA64MMFR0_EL1_TGRAN_SHIFT) & 0xf;
-	if (tg < ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN || tg > ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX) {
-		if (IS_ENABLED(CONFIG_ARM64_64K_PAGES))
-			efi_err("This 64 KB granular kernel is not supported by your CPU\n");
-		else
-			efi_err("This 16 KB granular kernel is not supported by your CPU\n");
-		return EFI_UNSUPPORTED;
-	}
-	return EFI_SUCCESS;
-}
-
 /*
  * Distro versions of GRUB may ignore the BSS allocation entirely (i.e., fail
  * to provide space, and fail to zero it). Check for this condition by double
@@ -103,16 +60,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 	efi_status_t status;
 	unsigned long kernel_size, kernel_memsize = 0;
 	u32 phys_seed = 0;
-
-	/*
-	 * Although relocatable kernels can fix up the misalignment with
-	 * respect to MIN_KIMG_ALIGN, the resulting virtual text addresses are
-	 * subtly out of sync with those recorded in the vmlinux when kaslr is
-	 * disabled but the image required relocation anyway. Therefore retain
-	 * 2M alignment if KASLR was explicitly disabled, even if it was not
-	 * going to be activated to begin with.
-	 */
-	u64 min_kimg_align = efi_nokaslr ? MIN_KIMG_ALIGN : EFI_KIMG_ALIGN;
+	u64 min_kimg_align = efi_get_kimg_min_align();
 
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
 		efi_guid_t li_fixed_proto = LINUX_EFI_LOADED_IMAGE_FIXED_GUID;
@@ -171,7 +119,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 			 */
 			*image_addr = (u64)_text;
 			*reserve_size = 0;
-			return EFI_SUCCESS;
+			goto clean_image_to_poc;
 		}
 
 		status = efi_allocate_pages_aligned(*reserve_size, reserve_addr,
@@ -187,5 +135,13 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 	*image_addr = *reserve_addr;
 	memcpy((void *)*image_addr, _text, kernel_size);
 
+clean_image_to_poc:
+	/*
+	 * Clean the copied Image to the PoC, and ensure it is not shadowed by
+	 * stale icache entries from before relocation.
+	 */
+	dcache_clean_poc(*image_addr, *image_addr + kernel_size);
+	asm("ic ialluis");
+
 	return EFI_SUCCESS;
 }
diff --git a/drivers/firmware/efi/libstub/arm64.c b/drivers/firmware/efi/libstub/arm64.c
new file mode 100644
index 000000000000..ff2d18c42ee7
--- /dev/null
+++ b/drivers/firmware/efi/libstub/arm64.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013, 2014 Linaro Ltd;  <roy.franz@linaro.org>
+ *
+ * This file implements the EFI boot stub for the arm64 kernel.
+ * Adapted from ARM version by Mark Salter <msalter@redhat.com>
+ */
+
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+#include <asm/memory.h>
+#include <asm/sysreg.h>
+
+#include "efistub.h"
+
+static bool system_needs_vamap(void)
+{
+	const u8 *type1_family = efi_get_smbios_string(1, family);
+
+	/*
+	 * Ampere Altra machines crash in SetTime() if SetVirtualAddressMap()
+	 * has not been called prior.
+	 */
+	if (!type1_family || strcmp(type1_family, "Altra"))
+		return false;
+
+	efi_warn("Working around broken SetVirtualAddressMap()\n");
+	return true;
+}
+
+efi_status_t check_platform_features(void)
+{
+	u64 tg;
+
+	/*
+	 * If we have 48 bits of VA space for TTBR0 mappings, we can map the
+	 * UEFI runtime regions 1:1 and so calling SetVirtualAddressMap() is
+	 * unnecessary.
+	 */
+	if (VA_BITS_MIN >= 48 && !system_needs_vamap())
+		efi_novamap = true;
+
+	/* UEFI mandates support for 4 KB granularity, no need to check */
+	if (IS_ENABLED(CONFIG_ARM64_4K_PAGES))
+		return EFI_SUCCESS;
+
+	tg = (read_cpuid(ID_AA64MMFR0_EL1) >> ID_AA64MMFR0_EL1_TGRAN_SHIFT) & 0xf;
+	if (tg < ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN || tg > ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX) {
+		if (IS_ENABLED(CONFIG_ARM64_64K_PAGES))
+			efi_err("This 64 KB granular kernel is not supported by your CPU\n");
+		else
+			efi_err("This 16 KB granular kernel is not supported by your CPU\n");
+		return EFI_UNSUPPORTED;
+	}
+	return EFI_SUCCESS;
+}
+
+void efi_cache_sync_image(unsigned long image_base,
+			  unsigned long alloc_size,
+			  unsigned long code_size)
+{
+	u32 ctr = read_cpuid_effective_cachetype();
+	u64 lsize = 4 << cpuid_feature_extract_unsigned_field(ctr,
+						CTR_EL0_DminLine_SHIFT);
+
+	do {
+		asm("dc civac, %0" :: "r"(image_base));
+		image_base += lsize;
+		alloc_size -= lsize;
+	} while (alloc_size >= lsize);
+
+	asm("ic ialluis");
+	dsb(ish);
+	isb();
+}
diff --git a/drivers/firmware/efi/libstub/efi-stub-entry.c b/drivers/firmware/efi/libstub/efi-stub-entry.c
new file mode 100644
index 000000000000..5245c4f031c0
--- /dev/null
+++ b/drivers/firmware/efi/libstub/efi-stub-entry.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/*
+ * EFI entry point for the generic EFI stub used by ARM, arm64, RISC-V and
+ * LoongArch. This is the entrypoint that is described in the PE/COFF header
+ * of the core kernel.
+ */
+efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
+				   efi_system_table_t *systab)
+{
+	efi_loaded_image_t *image;
+	efi_status_t status;
+	unsigned long image_addr;
+	unsigned long image_size = 0;
+	/* addr/point and size pairs for memory management*/
+	char *cmdline_ptr = NULL;
+	efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID;
+	unsigned long reserve_addr = 0;
+	unsigned long reserve_size = 0;
+
+	WRITE_ONCE(efi_system_table, systab);
+
+	/* Check if we were booted by the EFI firmware */
+	if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
+		return EFI_INVALID_PARAMETER;
+
+	/*
+	 * Get a handle to the loaded image protocol.  This is used to get
+	 * information about the running image, such as size and the command
+	 * line.
+	 */
+	status = efi_bs_call(handle_protocol, handle, &loaded_image_proto,
+			     (void *)&image);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to get loaded image protocol\n");
+		return status;
+	}
+
+	status = efi_handle_cmdline(image, &cmdline_ptr);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	efi_info("Booting Linux Kernel...\n");
+
+	status = handle_kernel_image(&image_addr, &image_size,
+				     &reserve_addr,
+				     &reserve_size,
+				     image, handle);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to relocate kernel\n");
+		return status;
+	}
+
+	status = efi_stub_common(handle, image, image_addr, cmdline_ptr);
+
+	efi_free(image_size, image_addr);
+	efi_free(reserve_size, reserve_addr);
+
+	return status;
+}
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index 0c493521b25b..2184f3f153ef 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -9,10 +9,8 @@
 
 #include <linux/stdarg.h>
 
-#include <linux/ctype.h>
 #include <linux/efi.h>
 #include <linux/kernel.h>
-#include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */
 #include <asm/efi.h>
 #include <asm/setup.h>
 
@@ -20,7 +18,6 @@
 
 bool efi_nochunk;
 bool efi_nokaslr = !IS_ENABLED(CONFIG_RANDOMIZE_BASE);
-int efi_loglevel = CONSOLE_LOGLEVEL_DEFAULT;
 bool efi_novamap;
 
 static bool efi_noinitrd;
@@ -32,146 +29,6 @@ bool __pure __efi_soft_reserve_enabled(void)
 	return !efi_nosoftreserve;
 }
 
-/**
- * efi_char16_puts() - Write a UCS-2 encoded string to the console
- * @str:	UCS-2 encoded string
- */
-void efi_char16_puts(efi_char16_t *str)
-{
-	efi_call_proto(efi_table_attr(efi_system_table, con_out),
-		       output_string, str);
-}
-
-static
-u32 utf8_to_utf32(const u8 **s8)
-{
-	u32 c32;
-	u8 c0, cx;
-	size_t clen, i;
-
-	c0 = cx = *(*s8)++;
-	/*
-	 * The position of the most-significant 0 bit gives us the length of
-	 * a multi-octet encoding.
-	 */
-	for (clen = 0; cx & 0x80; ++clen)
-		cx <<= 1;
-	/*
-	 * If the 0 bit is in position 8, this is a valid single-octet
-	 * encoding. If the 0 bit is in position 7 or positions 1-3, the
-	 * encoding is invalid.
-	 * In either case, we just return the first octet.
-	 */
-	if (clen < 2 || clen > 4)
-		return c0;
-	/* Get the bits from the first octet. */
-	c32 = cx >> clen--;
-	for (i = 0; i < clen; ++i) {
-		/* Trailing octets must have 10 in most significant bits. */
-		cx = (*s8)[i] ^ 0x80;
-		if (cx & 0xc0)
-			return c0;
-		c32 = (c32 << 6) | cx;
-	}
-	/*
-	 * Check for validity:
-	 * - The character must be in the Unicode range.
-	 * - It must not be a surrogate.
-	 * - It must be encoded using the correct number of octets.
-	 */
-	if (c32 > 0x10ffff ||
-	    (c32 & 0xf800) == 0xd800 ||
-	    clen != (c32 >= 0x80) + (c32 >= 0x800) + (c32 >= 0x10000))
-		return c0;
-	*s8 += clen;
-	return c32;
-}
-
-/**
- * efi_puts() - Write a UTF-8 encoded string to the console
- * @str:	UTF-8 encoded string
- */
-void efi_puts(const char *str)
-{
-	efi_char16_t buf[128];
-	size_t pos = 0, lim = ARRAY_SIZE(buf);
-	const u8 *s8 = (const u8 *)str;
-	u32 c32;
-
-	while (*s8) {
-		if (*s8 == '\n')
-			buf[pos++] = L'\r';
-		c32 = utf8_to_utf32(&s8);
-		if (c32 < 0x10000) {
-			/* Characters in plane 0 use a single word. */
-			buf[pos++] = c32;
-		} else {
-			/*
-			 * Characters in other planes encode into a surrogate
-			 * pair.
-			 */
-			buf[pos++] = (0xd800 - (0x10000 >> 10)) + (c32 >> 10);
-			buf[pos++] = 0xdc00 + (c32 & 0x3ff);
-		}
-		if (*s8 == '\0' || pos >= lim - 2) {
-			buf[pos] = L'\0';
-			efi_char16_puts(buf);
-			pos = 0;
-		}
-	}
-}
-
-/**
- * efi_printk() - Print a kernel message
- * @fmt:	format string
- *
- * The first letter of the format string is used to determine the logging level
- * of the message. If the level is less then the current EFI logging level, the
- * message is suppressed. The message will be truncated to 255 bytes.
- *
- * Return:	number of printed characters
- */
-int efi_printk(const char *fmt, ...)
-{
-	char printf_buf[256];
-	va_list args;
-	int printed;
-	int loglevel = printk_get_level(fmt);
-
-	switch (loglevel) {
-	case '0' ... '9':
-		loglevel -= '0';
-		break;
-	default:
-		/*
-		 * Use loglevel -1 for cases where we just want to print to
-		 * the screen.
-		 */
-		loglevel = -1;
-		break;
-	}
-
-	if (loglevel >= efi_loglevel)
-		return 0;
-
-	if (loglevel >= 0)
-		efi_puts("EFI stub: ");
-
-	fmt = printk_skip_level(fmt);
-
-	va_start(args, fmt);
-	printed = vsnprintf(printf_buf, sizeof(printf_buf), fmt, args);
-	va_end(args);
-
-	efi_puts(printf_buf);
-	if (printed >= sizeof(printf_buf)) {
-		efi_puts("[Message truncated]\n");
-		return -1;
-	}
-
-	return printed;
-}
-
 /**
  * efi_parse_options() - Parse EFI command line options
  * @cmdline:	kernel command line
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
index cf474f0dd261..2955c1ac6a36 100644
--- a/drivers/firmware/efi/libstub/efi-stub.c
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -35,15 +35,6 @@
  * as well to minimize the code churn.
  */
 #define EFI_RT_VIRTUAL_BASE	SZ_512M
-#define EFI_RT_VIRTUAL_SIZE	SZ_512M
-
-#ifdef CONFIG_ARM64
-# define EFI_RT_VIRTUAL_LIMIT	DEFAULT_MAP_WINDOW_64
-#elif defined(CONFIG_RISCV) || defined(CONFIG_LOONGARCH)
-# define EFI_RT_VIRTUAL_LIMIT	TASK_SIZE_MIN
-#else /* Only if TASK_SIZE is a constant */
-# define EFI_RT_VIRTUAL_LIMIT	TASK_SIZE
-#endif
 
 /*
  * Some architectures map the EFI regions into the kernel's linear map using a
@@ -56,6 +47,15 @@
 static u64 virtmap_base = EFI_RT_VIRTUAL_BASE;
 static bool flat_va_mapping = (EFI_RT_VIRTUAL_OFFSET != 0);
 
+struct screen_info * __weak alloc_screen_info(void)
+{
+	return &screen_info;
+}
+
+void __weak free_screen_info(struct screen_info *si)
+{
+}
+
 static struct screen_info *setup_graphics(void)
 {
 	efi_guid_t gop_proto = EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID;
@@ -115,62 +115,21 @@ static u32 get_supported_rt_services(void)
 	return supported;
 }
 
-/*
- * EFI entry point for the arm/arm64 EFI stubs.  This is the entrypoint
- * that is described in the PE/COFF header.  Most of the code is the same
- * for both archictectures, with the arch-specific code provided in the
- * handle_kernel_image() function.
- */
-efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
-				   efi_system_table_t *sys_table_arg)
+efi_status_t efi_handle_cmdline(efi_loaded_image_t *image, char **cmdline_ptr)
 {
-	efi_loaded_image_t *image;
-	efi_status_t status;
-	unsigned long image_addr;
-	unsigned long image_size = 0;
-	/* addr/point and size pairs for memory management*/
-	char *cmdline_ptr = NULL;
 	int cmdline_size = 0;
-	efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID;
-	unsigned long reserve_addr = 0;
-	unsigned long reserve_size = 0;
-	struct screen_info *si;
-	efi_properties_table_t *prop_tbl;
-
-	efi_system_table = sys_table_arg;
-
-	/* Check if we were booted by the EFI firmware */
-	if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) {
-		status = EFI_INVALID_PARAMETER;
-		goto fail;
-	}
-
-	status = check_platform_features();
-	if (status != EFI_SUCCESS)
-		goto fail;
-
-	/*
-	 * Get a handle to the loaded image protocol.  This is used to get
-	 * information about the running image, such as size and the command
-	 * line.
-	 */
-	status = efi_bs_call(handle_protocol, handle, &loaded_image_proto,
-			     (void *)&image);
-	if (status != EFI_SUCCESS) {
-		efi_err("Failed to get loaded image protocol\n");
-		goto fail;
-	}
+	efi_status_t status;
+	char *cmdline;
 
 	/*
 	 * Get the command line from EFI, using the LOADED_IMAGE
 	 * protocol. We are going to copy the command line into the
 	 * device tree, so this can be allocated anywhere.
 	 */
-	cmdline_ptr = efi_convert_cmdline(image, &cmdline_size);
-	if (!cmdline_ptr) {
+	cmdline = efi_convert_cmdline(image, &cmdline_size);
+	if (!cmdline) {
 		efi_err("getting command line via LOADED_IMAGE_PROTOCOL\n");
-		status = EFI_OUT_OF_RESOURCES;
-		goto fail;
+		return EFI_OUT_OF_RESOURCES;
 	}
 
 	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
@@ -184,26 +143,35 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 	}
 
 	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && cmdline_size > 0) {
-		status = efi_parse_options(cmdline_ptr);
+		status = efi_parse_options(cmdline);
 		if (status != EFI_SUCCESS) {
 			efi_err("Failed to parse options\n");
 			goto fail_free_cmdline;
 		}
 	}
 
-	efi_info("Booting Linux Kernel...\n");
+	*cmdline_ptr = cmdline;
+	return EFI_SUCCESS;
+
+fail_free_cmdline:
+	efi_bs_call(free_pool, cmdline_ptr);
+	return status;
+}
+
+efi_status_t efi_stub_common(efi_handle_t handle,
+			     efi_loaded_image_t *image,
+			     unsigned long image_addr,
+			     char *cmdline_ptr)
+{
+	struct screen_info *si;
+	efi_status_t status;
+
+	status = check_platform_features();
+	if (status != EFI_SUCCESS)
+		return status;
 
 	si = setup_graphics();
 
-	status = handle_kernel_image(&image_addr, &image_size,
-				     &reserve_addr,
-				     &reserve_size,
-				     image, handle);
-	if (status != EFI_SUCCESS) {
-		efi_err("Failed to relocate kernel\n");
-		goto fail_free_screeninfo;
-	}
-
 	efi_retrieve_tpm2_eventlog();
 
 	/* Ask the firmware to clear memory on unclean shutdown */
@@ -214,53 +182,15 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 
 	efi_random_get_seed();
 
-	/*
-	 * If the NX PE data feature is enabled in the properties table, we
-	 * should take care not to create a virtual mapping that changes the
-	 * relative placement of runtime services code and data regions, as
-	 * they may belong to the same PE/COFF executable image in memory.
-	 * The easiest way to achieve that is to simply use a 1:1 mapping.
-	 */
-	prop_tbl = get_efi_config_table(EFI_PROPERTIES_TABLE_GUID);
-	flat_va_mapping |= prop_tbl &&
-			   (prop_tbl->memory_protection_attribute &
-			   EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA);
-
 	/* force efi_novamap if SetVirtualAddressMap() is unsupported */
 	efi_novamap |= !(get_supported_rt_services() &
 			 EFI_RT_SUPPORTED_SET_VIRTUAL_ADDRESS_MAP);
 
-	/* hibernation expects the runtime regions to stay in the same place */
-	if (!IS_ENABLED(CONFIG_HIBERNATION) && !efi_nokaslr && !flat_va_mapping) {
-		/*
-		 * Randomize the base of the UEFI runtime services region.
-		 * Preserve the 2 MB alignment of the region by taking a
-		 * shift of 21 bit positions into account when scaling
-		 * the headroom value using a 32-bit random value.
-		 */
-		static const u64 headroom = EFI_RT_VIRTUAL_LIMIT -
-					    EFI_RT_VIRTUAL_BASE -
-					    EFI_RT_VIRTUAL_SIZE;
-		u32 rnd;
-
-		status = efi_get_random_bytes(sizeof(rnd), (u8 *)&rnd);
-		if (status == EFI_SUCCESS) {
-			virtmap_base = EFI_RT_VIRTUAL_BASE +
-				       (((headroom >> 21) * rnd) >> (32 - 21));
-		}
-	}
-
 	install_memreserve_table();
 
 	status = efi_boot_kernel(handle, image, image_addr, cmdline_ptr);
 
-	efi_free(image_size, image_addr);
-	efi_free(reserve_size, reserve_addr);
-fail_free_screeninfo:
 	free_screen_info(si);
-fail_free_cmdline:
-	efi_bs_call(free_pool, cmdline_ptr);
-fail:
 	return status;
 }
 
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index eb03d5a9aac8..21b01d6c77ba 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -958,6 +958,14 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 				 efi_loaded_image_t *image,
 				 efi_handle_t image_handle);
 
+/* shared entrypoint between the normal stub and the zboot stub */
+efi_status_t efi_stub_common(efi_handle_t handle,
+			     efi_loaded_image_t *image,
+			     unsigned long image_addr,
+			     char *cmdline_ptr);
+
+efi_status_t efi_handle_cmdline(efi_loaded_image_t *image, char **cmdline_ptr);
+
 asmlinkage void __noreturn efi_enter_kernel(unsigned long entrypoint,
 					    unsigned long fdt_addr,
 					    unsigned long fdt_size);
@@ -975,6 +983,13 @@ efi_enable_reset_attack_mitigation(void) { }
 
 void efi_retrieve_tpm2_eventlog(void);
 
+struct screen_info *alloc_screen_info(void);
+void free_screen_info(struct screen_info *si);
+
+void efi_cache_sync_image(unsigned long image_base,
+			  unsigned long alloc_size,
+			  unsigned long code_size);
+
 struct efi_smbios_record {
 	u8	type;
 	u8	length;
diff --git a/drivers/firmware/efi/libstub/file.c b/drivers/firmware/efi/libstub/file.c
index f756c61396e9..246ccc5b015d 100644
--- a/drivers/firmware/efi/libstub/file.c
+++ b/drivers/firmware/efi/libstub/file.c
@@ -66,28 +66,10 @@ static efi_status_t efi_open_file(efi_file_protocol_t *volume,
 static efi_status_t efi_open_volume(efi_loaded_image_t *image,
 				    efi_file_protocol_t **fh)
 {
-	struct efi_vendor_dev_path *dp = image->file_path;
-	efi_guid_t li_proto = LOADED_IMAGE_PROTOCOL_GUID;
 	efi_guid_t fs_proto = EFI_FILE_SYSTEM_GUID;
 	efi_simple_file_system_protocol_t *io;
 	efi_status_t status;
 
-	// If we are using EFI zboot, we should look for the file system
-	// protocol on the parent image's handle instead
-	if (IS_ENABLED(CONFIG_EFI_ZBOOT) &&
-	    image->parent_handle != NULL &&
-	    dp != NULL &&
-	    dp->header.type == EFI_DEV_MEDIA &&
-	    dp->header.sub_type == EFI_DEV_MEDIA_VENDOR &&
-	    !efi_guidcmp(dp->vendorguid, LINUX_EFI_ZBOOT_MEDIA_GUID)) {
-		status = efi_bs_call(handle_protocol, image->parent_handle,
-				     &li_proto, (void *)&image);
-		if (status != EFI_SUCCESS) {
-			efi_err("Failed to locate parent image handle\n");
-			return status;
-		}
-	}
-
 	status = efi_bs_call(handle_protocol, image->device_handle, &fs_proto,
 			     (void **)&io);
 	if (status != EFI_SUCCESS) {
diff --git a/drivers/firmware/efi/libstub/intrinsics.c b/drivers/firmware/efi/libstub/intrinsics.c
index a04ab39292b6..965e734f6f98 100644
--- a/drivers/firmware/efi/libstub/intrinsics.c
+++ b/drivers/firmware/efi/libstub/intrinsics.c
@@ -28,3 +28,21 @@ void *memset(void *dst, int c, size_t len)
 	efi_bs_call(set_mem, dst, len, c & U8_MAX);
 	return dst;
 }
+
+/**
+ * memcmp - Compare two areas of memory
+ * @cs: One area of memory
+ * @ct: Another area of memory
+ * @count: The size of the area.
+ */
+#undef memcmp
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+	const unsigned char *su1, *su2;
+	int res = 0;
+
+	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
+		if ((res = *su1 - *su2) != 0)
+			break;
+	return res;
+}
diff --git a/drivers/firmware/efi/libstub/loongarch-stub.c b/drivers/firmware/efi/libstub/loongarch-stub.c
index 32329f2a92f9..eee7ed43cdfb 100644
--- a/drivers/firmware/efi/libstub/loongarch-stub.c
+++ b/drivers/firmware/efi/libstub/loongarch-stub.c
@@ -9,18 +9,10 @@
 #include <asm/addrspace.h>
 #include "efistub.h"
 
-typedef void __noreturn (*kernel_entry_t)(bool efi, unsigned long cmdline,
-					  unsigned long systab);
-
 extern int kernel_asize;
 extern int kernel_fsize;
 extern int kernel_offset;
-extern kernel_entry_t kernel_entry;
-
-efi_status_t check_platform_features(void)
-{
-	return EFI_SUCCESS;
-}
+extern int kernel_entry;
 
 efi_status_t handle_kernel_image(unsigned long *image_addr,
 				 unsigned long *image_size,
@@ -29,74 +21,33 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 				 efi_loaded_image_t *image,
 				 efi_handle_t image_handle)
 {
+	int nr_pages = round_up(kernel_asize, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
+	efi_physical_addr_t kernel_addr = EFI_KIMG_PREFERRED_ADDRESS;
 	efi_status_t status;
-	unsigned long kernel_addr = 0;
 
-	kernel_addr = (unsigned long)&kernel_offset - kernel_offset;
+	/*
+	 * Allocate space for the kernel image at the preferred offset. This is
+	 * the only location in memory from where we can execute the image, so
+	 * no point in falling back to another allocation.
+	 */
+	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
+			     EFI_LOADER_DATA, nr_pages, &kernel_addr);
+	if (status != EFI_SUCCESS)
+		return status;
 
-	status = efi_relocate_kernel(&kernel_addr, kernel_fsize, kernel_asize,
-				     PHYSADDR(VMLINUX_LOAD_ADDRESS), SZ_2M, 0x0);
-
-	*image_addr = kernel_addr;
+	*image_addr = EFI_KIMG_PREFERRED_ADDRESS;
 	*image_size = kernel_asize;
 
+	memcpy((void *)EFI_KIMG_PREFERRED_ADDRESS,
+	       (void *)&kernel_offset - kernel_offset,
+	       kernel_fsize);
+
 	return status;
 }
 
-struct exit_boot_struct {
-	efi_memory_desc_t	*runtime_map;
-	int			runtime_entry_count;
-};
-
-static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv)
+unsigned long kernel_entry_address(void)
 {
-	struct exit_boot_struct *p = priv;
+	unsigned long base = (unsigned long)&kernel_offset - kernel_offset;
 
-	/*
-	 * Update the memory map with virtual addresses. The function will also
-	 * populate @runtime_map with copies of just the EFI_MEMORY_RUNTIME
-	 * entries so that we can pass it straight to SetVirtualAddressMap()
-	 */
-	efi_get_virtmap(map->map, map->map_size, map->desc_size,
-			p->runtime_map, &p->runtime_entry_count);
-
-	return EFI_SUCCESS;
-}
-
-efi_status_t efi_boot_kernel(void *handle, efi_loaded_image_t *image,
-			     unsigned long kernel_addr, char *cmdline_ptr)
-{
-	kernel_entry_t real_kernel_entry;
-	struct exit_boot_struct priv;
-	unsigned long desc_size;
-	efi_status_t status;
-	u32 desc_ver;
-
-	status = efi_alloc_virtmap(&priv.runtime_map, &desc_size, &desc_ver);
-	if (status != EFI_SUCCESS) {
-		efi_err("Unable to retrieve UEFI memory map.\n");
-		return status;
-	}
-
-	efi_info("Exiting boot services\n");
-
-	efi_novamap = false;
-	status = efi_exit_boot_services(handle, &priv, exit_boot_func);
-	if (status != EFI_SUCCESS)
-		return status;
-
-	/* Install the new virtual address map */
-	efi_rt_call(set_virtual_address_map,
-		    priv.runtime_entry_count * desc_size, desc_size,
-		    desc_ver, priv.runtime_map);
-
-	/* Config Direct Mapping */
-	csr_write64(CSR_DMW0_INIT, LOONGARCH_CSR_DMWIN0);
-	csr_write64(CSR_DMW1_INIT, LOONGARCH_CSR_DMWIN1);
-
-	real_kernel_entry = (kernel_entry_t)
-		((unsigned long)&kernel_entry - kernel_addr + VMLINUX_LOAD_ADDRESS);
-
-	real_kernel_entry(true, (unsigned long)cmdline_ptr,
-			  (unsigned long)efi_system_table);
+	return (unsigned long)&kernel_entry - base + VMLINUX_LOAD_ADDRESS;
 }
diff --git a/drivers/firmware/efi/libstub/loongarch.c b/drivers/firmware/efi/libstub/loongarch.c
new file mode 100644
index 000000000000..807cba2693fc
--- /dev/null
+++ b/drivers/firmware/efi/libstub/loongarch.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Author: Yun Liu <liuyun@loongson.cn>
+ *         Huacai Chen <chenhuacai@loongson.cn>
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+
+#include <asm/efi.h>
+#include <asm/addrspace.h>
+#include "efistub.h"
+
+typedef void __noreturn (*kernel_entry_t)(bool efi, unsigned long cmdline,
+					  unsigned long systab);
+
+efi_status_t check_platform_features(void)
+{
+	return EFI_SUCCESS;
+}
+
+struct exit_boot_struct {
+	efi_memory_desc_t	*runtime_map;
+	int			runtime_entry_count;
+};
+
+static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv)
+{
+	struct exit_boot_struct *p = priv;
+
+	/*
+	 * Update the memory map with virtual addresses. The function will also
+	 * populate @runtime_map with copies of just the EFI_MEMORY_RUNTIME
+	 * entries so that we can pass it straight to SetVirtualAddressMap()
+	 */
+	efi_get_virtmap(map->map, map->map_size, map->desc_size,
+			p->runtime_map, &p->runtime_entry_count);
+
+	return EFI_SUCCESS;
+}
+
+unsigned long __weak kernel_entry_address(void)
+{
+	return *(unsigned long *)(PHYSADDR(VMLINUX_LOAD_ADDRESS) + 8);
+}
+
+efi_status_t efi_boot_kernel(void *handle, efi_loaded_image_t *image,
+			     unsigned long kernel_addr, char *cmdline_ptr)
+{
+	kernel_entry_t real_kernel_entry;
+	struct exit_boot_struct priv;
+	unsigned long desc_size;
+	efi_status_t status;
+	u32 desc_ver;
+
+	status = efi_alloc_virtmap(&priv.runtime_map, &desc_size, &desc_ver);
+	if (status != EFI_SUCCESS) {
+		efi_err("Unable to retrieve UEFI memory map.\n");
+		return status;
+	}
+
+	efi_info("Exiting boot services\n");
+
+	efi_novamap = false;
+	status = efi_exit_boot_services(handle, &priv, exit_boot_func);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	/* Install the new virtual address map */
+	efi_rt_call(set_virtual_address_map,
+		    priv.runtime_entry_count * desc_size, desc_size,
+		    desc_ver, priv.runtime_map);
+
+	/* Config Direct Mapping */
+	csr_write64(CSR_DMW0_INIT, LOONGARCH_CSR_DMWIN0);
+	csr_write64(CSR_DMW1_INIT, LOONGARCH_CSR_DMWIN1);
+
+	real_kernel_entry = (void *)kernel_entry_address();
+
+	real_kernel_entry(true, (unsigned long)cmdline_ptr,
+			  (unsigned long)efi_system_table);
+}
diff --git a/drivers/firmware/efi/libstub/printk.c b/drivers/firmware/efi/libstub/printk.c
new file mode 100644
index 000000000000..3a67a2cea7bd
--- /dev/null
+++ b/drivers/firmware/efi/libstub/printk.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/stdarg.h>
+
+#include <linux/ctype.h>
+#include <linux/efi.h>
+#include <linux/kernel.h>
+#include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */
+#include <asm/efi.h>
+#include <asm/setup.h>
+
+#include "efistub.h"
+
+int efi_loglevel = CONSOLE_LOGLEVEL_DEFAULT;
+
+/**
+ * efi_char16_puts() - Write a UCS-2 encoded string to the console
+ * @str:	UCS-2 encoded string
+ */
+void efi_char16_puts(efi_char16_t *str)
+{
+	efi_call_proto(efi_table_attr(efi_system_table, con_out),
+		       output_string, str);
+}
+
+static
+u32 utf8_to_utf32(const u8 **s8)
+{
+	u32 c32;
+	u8 c0, cx;
+	size_t clen, i;
+
+	c0 = cx = *(*s8)++;
+	/*
+	 * The position of the most-significant 0 bit gives us the length of
+	 * a multi-octet encoding.
+	 */
+	for (clen = 0; cx & 0x80; ++clen)
+		cx <<= 1;
+	/*
+	 * If the 0 bit is in position 8, this is a valid single-octet
+	 * encoding. If the 0 bit is in position 7 or positions 1-3, the
+	 * encoding is invalid.
+	 * In either case, we just return the first octet.
+	 */
+	if (clen < 2 || clen > 4)
+		return c0;
+	/* Get the bits from the first octet. */
+	c32 = cx >> clen--;
+	for (i = 0; i < clen; ++i) {
+		/* Trailing octets must have 10 in most significant bits. */
+		cx = (*s8)[i] ^ 0x80;
+		if (cx & 0xc0)
+			return c0;
+		c32 = (c32 << 6) | cx;
+	}
+	/*
+	 * Check for validity:
+	 * - The character must be in the Unicode range.
+	 * - It must not be a surrogate.
+	 * - It must be encoded using the correct number of octets.
+	 */
+	if (c32 > 0x10ffff ||
+	    (c32 & 0xf800) == 0xd800 ||
+	    clen != (c32 >= 0x80) + (c32 >= 0x800) + (c32 >= 0x10000))
+		return c0;
+	*s8 += clen;
+	return c32;
+}
+
+/**
+ * efi_puts() - Write a UTF-8 encoded string to the console
+ * @str:	UTF-8 encoded string
+ */
+void efi_puts(const char *str)
+{
+	efi_char16_t buf[128];
+	size_t pos = 0, lim = ARRAY_SIZE(buf);
+	const u8 *s8 = (const u8 *)str;
+	u32 c32;
+
+	while (*s8) {
+		if (*s8 == '\n')
+			buf[pos++] = L'\r';
+		c32 = utf8_to_utf32(&s8);
+		if (c32 < 0x10000) {
+			/* Characters in plane 0 use a single word. */
+			buf[pos++] = c32;
+		} else {
+			/*
+			 * Characters in other planes encode into a surrogate
+			 * pair.
+			 */
+			buf[pos++] = (0xd800 - (0x10000 >> 10)) + (c32 >> 10);
+			buf[pos++] = 0xdc00 + (c32 & 0x3ff);
+		}
+		if (*s8 == '\0' || pos >= lim - 2) {
+			buf[pos] = L'\0';
+			efi_char16_puts(buf);
+			pos = 0;
+		}
+	}
+}
+
+/**
+ * efi_printk() - Print a kernel message
+ * @fmt:	format string
+ *
+ * The first letter of the format string is used to determine the logging level
+ * of the message. If the level is less then the current EFI logging level, the
+ * message is suppressed. The message will be truncated to 255 bytes.
+ *
+ * Return:	number of printed characters
+ */
+int efi_printk(const char *fmt, ...)
+{
+	char printf_buf[256];
+	va_list args;
+	int printed;
+	int loglevel = printk_get_level(fmt);
+
+	switch (loglevel) {
+	case '0' ... '9':
+		loglevel -= '0';
+		break;
+	default:
+		/*
+		 * Use loglevel -1 for cases where we just want to print to
+		 * the screen.
+		 */
+		loglevel = -1;
+		break;
+	}
+
+	if (loglevel >= efi_loglevel)
+		return 0;
+
+	if (loglevel >= 0)
+		efi_puts("EFI stub: ");
+
+	fmt = printk_skip_level(fmt);
+
+	va_start(args, fmt);
+	printed = vsnprintf(printf_buf, sizeof(printf_buf), fmt, args);
+	va_end(args);
+
+	efi_puts(printf_buf);
+	if (printed >= sizeof(printf_buf)) {
+		efi_puts("[Message truncated]\n");
+		return -1;
+	}
+
+	return printed;
+}
diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
index b450ebf95977..145c9f0ba217 100644
--- a/drivers/firmware/efi/libstub/riscv-stub.c
+++ b/drivers/firmware/efi/libstub/riscv-stub.c
@@ -4,7 +4,6 @@
  */
 
 #include <linux/efi.h>
-#include <linux/libfdt.h>
 
 #include <asm/efi.h>
 #include <asm/sections.h>
@@ -12,92 +11,16 @@
 
 #include "efistub.h"
 
-/*
- * RISC-V requires the kernel image to placed 2 MB aligned base for 64 bit and
- * 4MB for 32 bit.
- */
-#ifdef CONFIG_64BIT
-#define MIN_KIMG_ALIGN		SZ_2M
-#else
-#define MIN_KIMG_ALIGN		SZ_4M
-#endif
-
-typedef void __noreturn (*jump_kernel_func)(unsigned long, unsigned long);
-
-static unsigned long hartid;
-
-static int get_boot_hartid_from_fdt(void)
+unsigned long stext_offset(void)
 {
-	const void *fdt;
-	int chosen_node, len;
-	const void *prop;
-
-	fdt = get_efi_config_table(DEVICE_TREE_GUID);
-	if (!fdt)
-		return -EINVAL;
-
-	chosen_node = fdt_path_offset(fdt, "/chosen");
-	if (chosen_node < 0)
-		return -EINVAL;
-
-	prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len);
-	if (!prop)
-		return -EINVAL;
-
-	if (len == sizeof(u32))
-		hartid = (unsigned long) fdt32_to_cpu(*(fdt32_t *)prop);
-	else if (len == sizeof(u64))
-		hartid = (unsigned long) fdt64_to_cpu(__get_unaligned_t(fdt64_t, prop));
-	else
-		return -EINVAL;
-
-	return 0;
-}
-
-static efi_status_t get_boot_hartid_from_efi(void)
-{
-	efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID;
-	struct riscv_efi_boot_protocol *boot_protocol;
-	efi_status_t status;
-
-	status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL,
-			     (void **)&boot_protocol);
-	if (status != EFI_SUCCESS)
-		return status;
-	return efi_call_proto(boot_protocol, get_boot_hartid, &hartid);
-}
-
-efi_status_t check_platform_features(void)
-{
-	efi_status_t status;
-	int ret;
-
-	status = get_boot_hartid_from_efi();
-	if (status != EFI_SUCCESS) {
-		ret = get_boot_hartid_from_fdt();
-		if (ret) {
-			efi_err("Failed to get boot hartid!\n");
-			return EFI_UNSUPPORTED;
-		}
-	}
-	return EFI_SUCCESS;
-}
-
-void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt,
-				 unsigned long fdt_size)
-{
-	unsigned long stext_offset = _start_kernel - _start;
-	unsigned long kernel_entry = entrypoint + stext_offset;
-	jump_kernel_func jump_kernel = (jump_kernel_func)kernel_entry;
-
 	/*
-	 * Jump to real kernel here with following constraints.
-	 * 1. MMU should be disabled.
-	 * 2. a0 should contain hartid
-	 * 3. a1 should DT address
+	 * When built as part of the kernel, the EFI stub cannot branch to the
+	 * kernel proper via the image header, as the PE/COFF header is
+	 * strictly not part of the in-memory presentation of the image, only
+	 * of the file representation. So instead, we need to jump to the
+	 * actual entrypoint in the .text region of the image.
 	 */
-	csr_write(CSR_SATP, 0);
-	jump_kernel(hartid, fdt);
+	return _start_kernel - _start;
 }
 
 efi_status_t handle_kernel_image(unsigned long *image_addr,
@@ -125,9 +48,10 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 	 * lowest possible memory region as long as the address and size meets
 	 * the alignment constraints.
 	 */
-	preferred_addr = MIN_KIMG_ALIGN;
+	preferred_addr = EFI_KIMG_PREFERRED_ADDRESS;
 	status = efi_relocate_kernel(image_addr, kernel_size, *image_size,
-				     preferred_addr, MIN_KIMG_ALIGN, 0x0);
+				     preferred_addr, efi_get_kimg_min_align(),
+				     0x0);
 
 	if (status != EFI_SUCCESS) {
 		efi_err("Failed to relocate kernel\n");
diff --git a/drivers/firmware/efi/libstub/riscv.c b/drivers/firmware/efi/libstub/riscv.c
new file mode 100644
index 000000000000..8022b104c3e6
--- /dev/null
+++ b/drivers/firmware/efi/libstub/riscv.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+#include <linux/efi.h>
+#include <linux/libfdt.h>
+
+#include <asm/efi.h>
+#include <asm/unaligned.h>
+
+#include "efistub.h"
+
+typedef void __noreturn (*jump_kernel_func)(unsigned long, unsigned long);
+
+static unsigned long hartid;
+
+static int get_boot_hartid_from_fdt(void)
+{
+	const void *fdt;
+	int chosen_node, len;
+	const void *prop;
+
+	fdt = get_efi_config_table(DEVICE_TREE_GUID);
+	if (!fdt)
+		return -EINVAL;
+
+	chosen_node = fdt_path_offset(fdt, "/chosen");
+	if (chosen_node < 0)
+		return -EINVAL;
+
+	prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len);
+	if (!prop)
+		return -EINVAL;
+
+	if (len == sizeof(u32))
+		hartid = (unsigned long) fdt32_to_cpu(*(fdt32_t *)prop);
+	else if (len == sizeof(u64))
+		hartid = (unsigned long) fdt64_to_cpu(__get_unaligned_t(fdt64_t, prop));
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static efi_status_t get_boot_hartid_from_efi(void)
+{
+	efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID;
+	struct riscv_efi_boot_protocol *boot_protocol;
+	efi_status_t status;
+
+	status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL,
+			     (void **)&boot_protocol);
+	if (status != EFI_SUCCESS)
+		return status;
+	return efi_call_proto(boot_protocol, get_boot_hartid, &hartid);
+}
+
+efi_status_t check_platform_features(void)
+{
+	efi_status_t status;
+	int ret;
+
+	status = get_boot_hartid_from_efi();
+	if (status != EFI_SUCCESS) {
+		ret = get_boot_hartid_from_fdt();
+		if (ret) {
+			efi_err("Failed to get boot hartid!\n");
+			return EFI_UNSUPPORTED;
+		}
+	}
+	return EFI_SUCCESS;
+}
+
+unsigned long __weak stext_offset(void)
+{
+	/*
+	 * This fallback definition is used by the EFI zboot stub, which loads
+	 * the entire image so it can branch via the image header at offset #0.
+	 */
+	return 0;
+}
+
+void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt,
+				 unsigned long fdt_size)
+{
+	unsigned long kernel_entry = entrypoint + stext_offset();
+	jump_kernel_func jump_kernel = (jump_kernel_func)kernel_entry;
+
+	/*
+	 * Jump to real kernel here with following constraints.
+	 * 1. MMU should be disabled.
+	 * 2. a0 should contain hartid
+	 * 3. a1 should DT address
+	 */
+	csr_write(CSR_SATP, 0);
+	jump_kernel(hartid, fdt);
+}
diff --git a/drivers/firmware/efi/libstub/screen_info.c b/drivers/firmware/efi/libstub/screen_info.c
new file mode 100644
index 000000000000..8e76a8b384ba
--- /dev/null
+++ b/drivers/firmware/efi/libstub/screen_info.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/*
+ * There are two ways of populating the core kernel's struct screen_info via the stub:
+ * - using a configuration table, like below, which relies on the EFI init code
+ *   to locate the table and copy the contents;
+ * - by linking directly to the core kernel's copy of the global symbol.
+ *
+ * The latter is preferred because it makes the EFIFB earlycon available very
+ * early, but it only works if the EFI stub is part of the core kernel image
+ * itself. The zboot decompressor can only use the configuration table
+ * approach.
+ *
+ * In order to support both methods from the same build of the EFI stub
+ * library, provide this dummy global definition of struct screen_info. If it
+ * is required to satisfy a link dependency, it means we need to override the
+ * __weak alloc and free methods with the ones below, and those will be pulled
+ * in as well.
+ */
+struct screen_info screen_info;
+
+static efi_guid_t screen_info_guid = LINUX_EFI_SCREEN_INFO_TABLE_GUID;
+
+struct screen_info *alloc_screen_info(void)
+{
+	struct screen_info *si;
+	efi_status_t status;
+
+	status = efi_bs_call(allocate_pool, EFI_ACPI_RECLAIM_MEMORY,
+			     sizeof(*si), (void **)&si);
+
+	if (status != EFI_SUCCESS)
+		return NULL;
+
+	status = efi_bs_call(install_configuration_table,
+			     &screen_info_guid, si);
+	if (status == EFI_SUCCESS)
+		return si;
+
+	efi_bs_call(free_pool, si);
+	return NULL;
+}
+
+void free_screen_info(struct screen_info *si)
+{
+	if (!si)
+		return;
+
+	efi_bs_call(install_configuration_table, &screen_info_guid, NULL);
+	efi_bs_call(free_pool, si);
+}
diff --git a/drivers/firmware/efi/libstub/string.c b/drivers/firmware/efi/libstub/string.c
index 5d13e43869ee..168fe8e79abc 100644
--- a/drivers/firmware/efi/libstub/string.c
+++ b/drivers/firmware/efi/libstub/string.c
@@ -11,7 +11,37 @@
 #include <linux/types.h>
 #include <linux/string.h>
 
-#ifndef __HAVE_ARCH_STRSTR
+#ifndef EFI_HAVE_STRLEN
+/**
+ * strlen - Find the length of a string
+ * @s: The string to be sized
+ */
+size_t strlen(const char *s)
+{
+	const char *sc;
+
+	for (sc = s; *sc != '\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+#endif
+
+#ifndef EFI_HAVE_STRNLEN
+/**
+ * strnlen - Find the length of a length-limited string
+ * @s: The string to be sized
+ * @count: The maximum number of bytes to search
+ */
+size_t strnlen(const char *s, size_t count)
+{
+	const char *sc;
+
+	for (sc = s; count-- && *sc != '\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+#endif
+
 /**
  * strstr - Find the first substring in a %NUL terminated string
  * @s1: The string to be searched
@@ -33,9 +63,29 @@ char *strstr(const char *s1, const char *s2)
 	}
 	return NULL;
 }
+
+#ifndef EFI_HAVE_STRCMP
+/**
+ * strcmp - Compare two strings
+ * @cs: One string
+ * @ct: Another string
+ */
+int strcmp(const char *cs, const char *ct)
+{
+	unsigned char c1, c2;
+
+	while (1) {
+		c1 = *cs++;
+		c2 = *ct++;
+		if (c1 != c2)
+			return c1 < c2 ? -1 : 1;
+		if (!c1)
+			break;
+	}
+	return 0;
+}
 #endif
 
-#ifndef __HAVE_ARCH_STRNCMP
 /**
  * strncmp - Compare two length-limited strings
  * @cs: One string
@@ -57,7 +107,6 @@ int strncmp(const char *cs, const char *ct, size_t count)
 	}
 	return 0;
 }
-#endif
 
 /* Works only for digits and letters, but small and fast */
 #define TOLOWER(x) ((x) | 0x20)
@@ -113,3 +162,43 @@ long simple_strtol(const char *cp, char **endp, unsigned int base)
 
 	return simple_strtoull(cp, endp, base);
 }
+
+#ifdef CONFIG_EFI_PARAMS_FROM_FDT
+#ifndef EFI_HAVE_STRRCHR
+/**
+ * strrchr - Find the last occurrence of a character in a string
+ * @s: The string to be searched
+ * @c: The character to search for
+ */
+char *strrchr(const char *s, int c)
+{
+	const char *last = NULL;
+	do {
+		if (*s == (char)c)
+			last = s;
+	} while (*s++);
+	return (char *)last;
+}
+#endif
+#ifndef EFI_HAVE_MEMCHR
+/**
+ * memchr - Find a character in an area of memory.
+ * @s: The memory area
+ * @c: The byte to search for
+ * @n: The size of the area.
+ *
+ * returns the address of the first occurrence of @c, or %NULL
+ * if @c is not found
+ */
+void *memchr(const void *s, int c, size_t n)
+{
+	const unsigned char *p = s;
+	while (n-- != 0) {
+		if ((unsigned char)c == *p++) {
+			return (void *)(p - 1);
+		}
+	}
+	return NULL;
+}
+#endif
+#endif
diff --git a/drivers/firmware/efi/libstub/zboot-header.S b/drivers/firmware/efi/libstub/zboot-header.S
index 9e6fe061ab07..bc2d7750d7f1 100644
--- a/drivers/firmware/efi/libstub/zboot-header.S
+++ b/drivers/firmware/efi/libstub/zboot-header.S
@@ -17,7 +17,7 @@ __efistub_efi_zboot_header:
 	.long		MZ_MAGIC
 	.ascii		"zimg"					// image type
 	.long		__efistub__gzdata_start - .Ldoshdr	// payload offset
-	.long		__efistub__gzdata_size - ZBOOT_SIZE_LEN	// payload size
+	.long		__efistub__gzdata_size - 12		// payload size
 	.long		0, 0					// reserved
 	.asciz		COMP_TYPE				// compression type
 	.org		.Ldoshdr + 0x3c
diff --git a/drivers/firmware/efi/libstub/zboot.c b/drivers/firmware/efi/libstub/zboot.c
index ea72c8f27da6..66be5fdc6b58 100644
--- a/drivers/firmware/efi/libstub/zboot.c
+++ b/drivers/firmware/efi/libstub/zboot.c
@@ -32,271 +32,116 @@ static unsigned long free_mem_ptr, free_mem_end_ptr;
 extern char efi_zboot_header[];
 extern char _gzdata_start[], _gzdata_end[];
 
-static void log(efi_char16_t str[])
-{
-	efi_call_proto(efi_table_attr(efi_system_table, con_out),
-		       output_string, L"EFI decompressor: ");
-	efi_call_proto(efi_table_attr(efi_system_table, con_out),
-		       output_string, str);
-	efi_call_proto(efi_table_attr(efi_system_table, con_out),
-		       output_string, L"\n");
-}
-
 static void error(char *x)
 {
-	log(L"error() called from decompressor library\n");
+	efi_err("EFI decompressor: %s\n", x);
 }
 
-// Local version to avoid pulling in memcmp()
-static bool guids_eq(const efi_guid_t *a, const efi_guid_t *b)
+static unsigned long alloc_preferred_address(unsigned long alloc_size)
 {
-	const u32 *l = (u32 *)a;
-	const u32 *r = (u32 *)b;
+#ifdef EFI_KIMG_PREFERRED_ADDRESS
+	efi_physical_addr_t efi_addr = EFI_KIMG_PREFERRED_ADDRESS;
 
-	return l[0] == r[0] && l[1] == r[1] && l[2] == r[2] && l[3] == r[3];
+	if (efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
+			alloc_size / EFI_PAGE_SIZE, &efi_addr) == EFI_SUCCESS)
+		return efi_addr;
+#endif
+	return ULONG_MAX;
 }
 
-static efi_status_t __efiapi
-load_file(efi_load_file_protocol_t *this, efi_device_path_protocol_t *rem,
-	  bool boot_policy, unsigned long *bufsize, void *buffer)
+void __weak efi_cache_sync_image(unsigned long image_base,
+				 unsigned long alloc_size,
+				 unsigned long code_size)
 {
-	unsigned long compressed_size = _gzdata_end - _gzdata_start;
-	struct efi_vendor_dev_path *vendor_dp;
-	bool decompress = false;
-	unsigned long size;
-	int ret;
-
-	if (rem == NULL || bufsize == NULL)
-		return EFI_INVALID_PARAMETER;
-
-	if (boot_policy)
-		return EFI_UNSUPPORTED;
-
-	// Look for our vendor media device node in the remaining file path
-	if (rem->type == EFI_DEV_MEDIA &&
-	    rem->sub_type == EFI_DEV_MEDIA_VENDOR) {
-		vendor_dp = container_of(rem, struct efi_vendor_dev_path, header);
-		if (!guids_eq(&vendor_dp->vendorguid, &LINUX_EFI_ZBOOT_MEDIA_GUID))
-			return EFI_NOT_FOUND;
-
-		decompress = true;
-		rem = (void *)(vendor_dp + 1);
-	}
-
-	if (rem->type != EFI_DEV_END_PATH ||
-	    rem->sub_type != EFI_DEV_END_ENTIRE)
-		return EFI_NOT_FOUND;
-
-	// The uncompressed size of the payload is appended to the raw bit
-	// stream, and may therefore appear misaligned in memory
-	size = decompress ? get_unaligned_le32(_gzdata_end - 4)
-			  : compressed_size;
-	if (buffer == NULL || *bufsize < size) {
-		*bufsize = size;
-		return EFI_BUFFER_TOO_SMALL;
-	}
-
-	if (decompress) {
-		ret = __decompress(_gzdata_start, compressed_size, NULL, NULL,
-				   buffer, size, NULL, error);
-		if (ret	< 0) {
-			log(L"Decompression failed");
-			return EFI_DEVICE_ERROR;
-		}
-	} else {
-		memcpy(buffer, _gzdata_start, compressed_size);
-	}
-
-	return EFI_SUCCESS;
-}
-
-// Return the length in bytes of the device path up to the first end node.
-static int device_path_length(const efi_device_path_protocol_t *dp)
-{
-	int len = 0;
-
-	while (dp->type != EFI_DEV_END_PATH) {
-		len += dp->length;
-		dp = (void *)((u8 *)dp + dp->length);
-	}
-	return len;
-}
-
-static void append_rel_offset_node(efi_device_path_protocol_t **dp,
-				   unsigned long start, unsigned long end)
-{
-	struct efi_rel_offset_dev_path *rodp = (void *)*dp;
-
-	rodp->header.type	= EFI_DEV_MEDIA;
-	rodp->header.sub_type	= EFI_DEV_MEDIA_REL_OFFSET;
-	rodp->header.length	= sizeof(struct efi_rel_offset_dev_path);
-	rodp->reserved		= 0;
-	rodp->starting_offset	= start;
-	rodp->ending_offset	= end;
-
-	*dp = (void *)(rodp + 1);
-}
-
-static void append_ven_media_node(efi_device_path_protocol_t **dp,
-				  efi_guid_t *guid)
-{
-	struct efi_vendor_dev_path *vmdp = (void *)*dp;
-
-	vmdp->header.type	= EFI_DEV_MEDIA;
-	vmdp->header.sub_type	= EFI_DEV_MEDIA_VENDOR;
-	vmdp->header.length	= sizeof(struct efi_vendor_dev_path);
-	vmdp->vendorguid	= *guid;
-
-	*dp = (void *)(vmdp + 1);
-}
-
-static void append_end_node(efi_device_path_protocol_t **dp)
-{
-	(*dp)->type		= EFI_DEV_END_PATH;
-	(*dp)->sub_type		= EFI_DEV_END_ENTIRE;
-	(*dp)->length		= sizeof(struct efi_generic_dev_path);
-
-	++*dp;
+	// Provided by the arch to perform the cache maintenance necessary for
+	// executable code loaded into memory to be safe for execution.
 }
 
 asmlinkage efi_status_t __efiapi
 efi_zboot_entry(efi_handle_t handle, efi_system_table_t *systab)
 {
-	struct efi_mem_mapped_dev_path mmdp = {
-		.header.type		= EFI_DEV_HW,
-		.header.sub_type	= EFI_DEV_MEM_MAPPED,
-		.header.length		= sizeof(struct efi_mem_mapped_dev_path)
-	};
-	efi_device_path_protocol_t *parent_dp, *dpp, *lf2_dp, *li_dp;
-	efi_load_file2_protocol_t zboot_load_file2;
-	efi_loaded_image_t *parent, *child;
-	unsigned long exit_data_size;
-	efi_handle_t child_handle;
-	efi_handle_t zboot_handle;
-	efi_char16_t *exit_data;
+	unsigned long compressed_size = _gzdata_end - _gzdata_start;
+	unsigned long image_base, alloc_size, code_size;
+	efi_loaded_image_t *image;
 	efi_status_t status;
-	void *dp_alloc;
-	int dp_len;
+	char *cmdline_ptr;
+	int ret;
 
 	WRITE_ONCE(efi_system_table, systab);
 
 	free_mem_ptr = (unsigned long)&zboot_heap;
 	free_mem_end_ptr = free_mem_ptr + sizeof(zboot_heap);
 
-	exit_data = NULL;
-	exit_data_size = 0;
-
 	status = efi_bs_call(handle_protocol, handle,
-			     &LOADED_IMAGE_PROTOCOL_GUID, (void **)&parent);
+			     &LOADED_IMAGE_PROTOCOL_GUID, (void **)&image);
 	if (status != EFI_SUCCESS) {
-		log(L"Failed to locate parent's loaded image protocol");
+		error("Failed to locate parent's loaded image protocol");
 		return status;
 	}
 
-	status = efi_bs_call(handle_protocol, handle,
-			     &LOADED_IMAGE_DEVICE_PATH_PROTOCOL_GUID,
-			     (void **)&parent_dp);
-	if (status != EFI_SUCCESS || parent_dp == NULL) {
-		// Create a MemoryMapped() device path node to describe
-		// the parent image if no device path was provided.
-		mmdp.memory_type	= parent->image_code_type;
-		mmdp.starting_addr	= (unsigned long)parent->image_base;
-		mmdp.ending_addr	= (unsigned long)parent->image_base +
-					  parent->image_size - 1;
-		parent_dp = &mmdp.header;
-		dp_len = sizeof(mmdp);
-	} else {
-		dp_len = device_path_length(parent_dp);
-	}
-
-	// Allocate some pool memory for device path protocol data
-	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA,
-			     2 * (dp_len + sizeof(struct efi_rel_offset_dev_path) +
-			          sizeof(struct efi_generic_dev_path)) +
-			     sizeof(struct efi_vendor_dev_path),
-			     (void **)&dp_alloc);
-	if (status != EFI_SUCCESS) {
-		log(L"Failed to allocate device path pool memory");
+	status = efi_handle_cmdline(image, &cmdline_ptr);
+	if (status != EFI_SUCCESS)
 		return status;
+
+	efi_info("Decompressing Linux Kernel...\n");
+
+	// SizeOfImage from the compressee's PE/COFF header
+	alloc_size = round_up(get_unaligned_le32(_gzdata_end - 4),
+			      EFI_ALLOC_ALIGN);
+
+	// SizeOfHeaders and SizeOfCode from the compressee's PE/COFF header
+	code_size = get_unaligned_le32(_gzdata_end - 8) +
+		    get_unaligned_le32(_gzdata_end - 12);
+
+	 // If the architecture has a preferred address for the image,
+	 // try that first.
+	image_base = alloc_preferred_address(alloc_size);
+	if (image_base == ULONG_MAX) {
+		unsigned long min_kimg_align = efi_get_kimg_min_align();
+		u32 seed = U32_MAX;
+
+		if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
+			// Setting the random seed to 0x0 is the same as
+			// allocating as low as possible
+			seed = 0;
+		} else if (efi_nokaslr) {
+			efi_info("KASLR disabled on kernel command line\n");
+		} else {
+			status = efi_get_random_bytes(sizeof(seed), (u8 *)&seed);
+			if (status == EFI_NOT_FOUND) {
+				efi_info("EFI_RNG_PROTOCOL unavailable\n");
+				efi_nokaslr = true;
+			} else if (status != EFI_SUCCESS) {
+				efi_err("efi_get_random_bytes() failed (0x%lx)\n",
+					status);
+				efi_nokaslr = true;
+			}
+		}
+
+		status = efi_random_alloc(alloc_size, min_kimg_align, &image_base,
+					  seed, EFI_LOADER_CODE);
+		if (status != EFI_SUCCESS) {
+			efi_err("Failed to allocate memory\n");
+			goto free_cmdline;
+		}
 	}
 
-	// Create a device path describing the compressed payload in this image
-	// <...parent_dp...>/Offset(<start>, <end>)
-	lf2_dp = memcpy(dp_alloc, parent_dp, dp_len);
-	dpp = (void *)((u8 *)lf2_dp + dp_len);
-	append_rel_offset_node(&dpp,
-			       (unsigned long)(_gzdata_start - efi_zboot_header),
-			       (unsigned long)(_gzdata_end - efi_zboot_header - 1));
-	append_end_node(&dpp);
-
-	// Create a device path describing the decompressed payload in this image
-	// <...parent_dp...>/Offset(<start>, <end>)/VenMedia(ZBOOT_MEDIA_GUID)
-	dp_len += sizeof(struct efi_rel_offset_dev_path);
-	li_dp = memcpy(dpp, lf2_dp, dp_len);
-	dpp = (void *)((u8 *)li_dp + dp_len);
-	append_ven_media_node(&dpp, &LINUX_EFI_ZBOOT_MEDIA_GUID);
-	append_end_node(&dpp);
-
-	zboot_handle = NULL;
-	zboot_load_file2.load_file = load_file;
-	status = efi_bs_call(install_multiple_protocol_interfaces,
-			     &zboot_handle,
-			     &EFI_DEVICE_PATH_PROTOCOL_GUID, lf2_dp,
-			     &EFI_LOAD_FILE2_PROTOCOL_GUID, &zboot_load_file2,
-			     NULL);
-	if (status != EFI_SUCCESS) {
-		log(L"Failed to install LoadFile2 protocol and device path");
-		goto free_dpalloc;
+	// Decompress the payload into the newly allocated buffer.
+	ret = __decompress(_gzdata_start, compressed_size, NULL, NULL,
+			   (void *)image_base, alloc_size, NULL, error);
+	if (ret	< 0) {
+		error("Decompression failed");
+		status = EFI_DEVICE_ERROR;
+		goto free_image;
 	}
 
-	status = efi_bs_call(load_image, false, handle, li_dp, NULL, 0,
-			     &child_handle);
-	if (status != EFI_SUCCESS) {
-		log(L"Failed to load image");
-		goto uninstall_lf2;
-	}
+	efi_cache_sync_image(image_base, alloc_size, code_size);
 
-	status = efi_bs_call(handle_protocol, child_handle,
-			     &LOADED_IMAGE_PROTOCOL_GUID, (void **)&child);
-	if (status != EFI_SUCCESS) {
-		log(L"Failed to locate child's loaded image protocol");
-		goto unload_image;
-	}
+	status = efi_stub_common(handle, image, image_base, cmdline_ptr);
 
-	// Copy the kernel command line
-	child->load_options = parent->load_options;
-	child->load_options_size = parent->load_options_size;
-
-	status = efi_bs_call(start_image, child_handle, &exit_data_size,
-			     &exit_data);
-	if (status != EFI_SUCCESS) {
-		log(L"StartImage() returned with error");
-		if (exit_data_size > 0)
-			log(exit_data);
-
-		// If StartImage() returns EFI_SECURITY_VIOLATION, the image is
-		// not unloaded so we need to do it by hand.
-		if (status == EFI_SECURITY_VIOLATION)
-unload_image:
-			efi_bs_call(unload_image, child_handle);
-	}
-
-uninstall_lf2:
-	efi_bs_call(uninstall_multiple_protocol_interfaces,
-		    zboot_handle,
-		    &EFI_DEVICE_PATH_PROTOCOL_GUID, lf2_dp,
-		    &EFI_LOAD_FILE2_PROTOCOL_GUID, &zboot_load_file2,
-		    NULL);
-
-free_dpalloc:
-	efi_bs_call(free_pool, dp_alloc);
-
-	efi_bs_call(exit, handle, status, exit_data_size, exit_data);
-
-	// Free ExitData in case Exit() returned with a failure code,
-	// but return the original status code.
-	log(L"Exit() returned with failure code");
-	if (exit_data != NULL)
-		efi_bs_call(free_pool, exit_data);
+free_image:
+	efi_free(alloc_size, image_base);
+free_cmdline:
+	efi_bs_call(free_pool, cmdline_ptr);
 	return status;
 }
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 7603fc58c47c..2d4d5a7fd781 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -404,7 +404,7 @@ void efi_native_runtime_setup(void);
  * structure that was populated by the stub based on the GOP protocol instance
  * associated with ConOut
  */
-#define LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID	EFI_GUID(0xe03fc20a, 0x85dc, 0x406e,  0xb9, 0x0e, 0x4a, 0xb5, 0x02, 0x37, 0x1d, 0x95)
+#define LINUX_EFI_SCREEN_INFO_TABLE_GUID	EFI_GUID(0xe03fc20a, 0x85dc, 0x406e,  0xb9, 0x0e, 0x4a, 0xb5, 0x02, 0x37, 0x1d, 0x95)
 #define LINUX_EFI_ARM_CPU_STATE_TABLE_GUID	EFI_GUID(0xef79e4aa, 0x3c3d, 0x4989,  0xb9, 0x02, 0x07, 0xa9, 0x43, 0xe5, 0x50, 0xd2)
 #define LINUX_EFI_LOADER_ENTRY_GUID		EFI_GUID(0x4a67b082, 0x0a4c, 0x41cf,  0xb6, 0xc7, 0x44, 0x0b, 0x29, 0xbb, 0x8c, 0x4f)
 #define LINUX_EFI_RANDOM_SEED_TABLE_GUID	EFI_GUID(0x1ce1e5bc, 0x7ceb, 0x42f2,  0x81, 0xe5, 0x8a, 0xad, 0xf1, 0x80, 0xf5, 0x7b)
@@ -412,7 +412,6 @@ void efi_native_runtime_setup(void);
 #define LINUX_EFI_TPM_FINAL_LOG_GUID		EFI_GUID(0x1e2ed096, 0x30e2, 0x4254,  0xbd, 0x89, 0x86, 0x3b, 0xbe, 0xf8, 0x23, 0x25)
 #define LINUX_EFI_MEMRESERVE_TABLE_GUID		EFI_GUID(0x888eb0c6, 0x8ede, 0x4ff5,  0xa8, 0xf0, 0x9a, 0xee, 0x5c, 0xb9, 0x77, 0xc2)
 #define LINUX_EFI_INITRD_MEDIA_GUID		EFI_GUID(0x5568e427, 0x68fc, 0x4f3d,  0xac, 0x74, 0xca, 0x55, 0x52, 0x31, 0xcc, 0x68)
-#define LINUX_EFI_ZBOOT_MEDIA_GUID		EFI_GUID(0xe565a30d, 0x47da, 0x4dbd,  0xb3, 0x54, 0x9b, 0xb5, 0xc8, 0x4f, 0x8b, 0xe2)
 #define LINUX_EFI_MOK_VARIABLE_TABLE_GUID	EFI_GUID(0xc451ed2b, 0x9694, 0x45d3,  0xba, 0xba, 0xed, 0x9f, 0x89, 0x88, 0xa3, 0x89)
 #define LINUX_EFI_COCO_SECRET_AREA_GUID		EFI_GUID(0xadf956ad, 0xe98c, 0x484c,  0xae, 0x11, 0xb5, 0x1c, 0x7d, 0x33, 0x64, 0x47)
 #define LINUX_EFI_BOOT_MEMMAP_GUID		EFI_GUID(0x800f683f, 0xd08b, 0x423a,  0xa2, 0x93, 0x96, 0x5c, 0x3c, 0x6f, 0xe2, 0xb4)