mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 13:22:23 +00:00
remove the broken SKMC driver
The SKMC driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Adrian Bunk
Jeff Garzik
parent
bf34570729
commit
95f48a71a2
@ -1155,21 +1155,6 @@ config SEEQ8005
|
||||
<file:Documentation/networking/net-modules.txt>. The module
|
||||
will be called seeq8005.
|
||||
|
||||
config SKMC
|
||||
tristate "SKnet MCA support"
|
||||
depends on NET_ETHERNET && MCA && BROKEN
|
||||
---help---
|
||||
These are Micro Channel Ethernet adapters. You need to say Y to "MCA
|
||||
support" in order to use this driver. Supported cards are the SKnet
|
||||
Junior MC2 and the SKnet MC2(+). The driver automatically
|
||||
distinguishes between the two cards. Note that using multiple boards
|
||||
of different type hasn't been tested with this driver. Say Y if you
|
||||
have one of these Ethernet adapters.
|
||||
|
||||
To compile this driver as a module, choose M here and read
|
||||
<file:Documentation/networking/net-modules.txt>. The module
|
||||
will be called sk_mca.
|
||||
|
||||
config NE2_MCA
|
||||
tristate "NE/2 (ne2000 MCA version) support"
|
||||
depends on NET_ETHERNET && MCA_LEGACY
|
||||
|
||||
@ -137,7 +137,6 @@ obj-$(CONFIG_AT1700) += at1700.o
|
||||
obj-$(CONFIG_EL1) += 3c501.o
|
||||
obj-$(CONFIG_EL16) += 3c507.o
|
||||
obj-$(CONFIG_ELMC) += 3c523.o
|
||||
obj-$(CONFIG_SKMC) += sk_mca.o
|
||||
obj-$(CONFIG_IBMLANA) += ibmlana.o
|
||||
obj-$(CONFIG_ELMC_II) += 3c527.o
|
||||
obj-$(CONFIG_EL3) += 3c509.o
|
||||
|
||||
@ -59,7 +59,6 @@ extern struct net_device *wavelan_probe(int unit);
|
||||
extern struct net_device *arlan_probe(int unit);
|
||||
extern struct net_device *el16_probe(int unit);
|
||||
extern struct net_device *elmc_probe(int unit);
|
||||
extern struct net_device *skmca_probe(int unit);
|
||||
extern struct net_device *elplus_probe(int unit);
|
||||
extern struct net_device *ac3200_probe(int unit);
|
||||
extern struct net_device *es_probe(int unit);
|
||||
@ -152,9 +151,6 @@ static struct devprobe2 mca_probes[] __initdata = {
|
||||
#endif
|
||||
#ifdef CONFIG_ELMC_II /* 3c527 */
|
||||
{mc32_probe, 0},
|
||||
#endif
|
||||
#ifdef CONFIG_SKMC /* SKnet Microchannel */
|
||||
{skmca_probe, 0},
|
||||
#endif
|
||||
{NULL, 0},
|
||||
};
|
||||
|
||||
1216
drivers/net/sk_mca.c
1216
drivers/net/sk_mca.c
File diff suppressed because it is too large
Load Diff
@ -1,170 +0,0 @@
|
||||
#ifndef _SK_MCA_INCLUDE_
|
||||
#define _SK_MCA_INCLUDE_
|
||||
|
||||
#ifdef _SK_MCA_DRIVER_
|
||||
|
||||
/* Adapter ID's */
|
||||
#define SKNET_MCA_ID 0x6afd
|
||||
#define SKNET_JUNIOR_MCA_ID 0x6be9
|
||||
|
||||
/* media enumeration - defined in a way that it fits onto the MC2+'s
|
||||
POS registers... */
|
||||
|
||||
typedef enum { Media_10Base2, Media_10BaseT,
|
||||
Media_10Base5, Media_Unknown, Media_Count
|
||||
} skmca_medium;
|
||||
|
||||
/* private structure */
|
||||
typedef struct {
|
||||
unsigned int slot; /* MCA-Slot-# */
|
||||
void __iomem *base;
|
||||
void __iomem *macbase; /* base address of MAC address PROM */
|
||||
void __iomem *ioregaddr;/* address of I/O-register (Lo) */
|
||||
void __iomem *ctrladdr; /* address of control/stat register */
|
||||
void __iomem *cmdaddr; /* address of I/O-command register */
|
||||
int nextrx; /* index of next RX descriptor to
|
||||
be read */
|
||||
int nexttxput; /* index of next free TX descriptor */
|
||||
int nexttxdone; /* index of next TX descriptor to
|
||||
be finished */
|
||||
int txbusy; /* # of busy TX descriptors */
|
||||
struct net_device_stats stat; /* packet statistics */
|
||||
int realirq; /* memorizes actual IRQ, even when
|
||||
currently not allocated */
|
||||
skmca_medium medium; /* physical cannector */
|
||||
spinlock_t lock;
|
||||
} skmca_priv;
|
||||
|
||||
/* card registers: control/status register bits */
|
||||
|
||||
#define CTRL_ADR_DATA 0 /* Bit 0 = 0 ->access data register */
|
||||
#define CTRL_ADR_RAP 1 /* Bit 0 = 1 ->access RAP register */
|
||||
#define CTRL_RW_WRITE 0 /* Bit 1 = 0 ->write register */
|
||||
#define CTRL_RW_READ 2 /* Bit 1 = 1 ->read register */
|
||||
#define CTRL_RESET_ON 0 /* Bit 3 = 0 ->reset board */
|
||||
#define CTRL_RESET_OFF 8 /* Bit 3 = 1 ->no reset of board */
|
||||
|
||||
#define STAT_ADR_DATA 0 /* Bit 0 of ctrl register read back */
|
||||
#define STAT_ADR_RAP 1
|
||||
#define STAT_RW_WRITE 0 /* Bit 1 of ctrl register read back */
|
||||
#define STAT_RW_READ 2
|
||||
#define STAT_RESET_ON 0 /* Bit 3 of ctrl register read back */
|
||||
#define STAT_RESET_OFF 8
|
||||
#define STAT_IRQ_ACT 0 /* interrupt pending */
|
||||
#define STAT_IRQ_NOACT 16 /* no interrupt pending */
|
||||
#define STAT_IO_NOBUSY 0 /* no transfer busy */
|
||||
#define STAT_IO_BUSY 32 /* transfer busy */
|
||||
|
||||
/* I/O command register bits */
|
||||
|
||||
#define IOCMD_GO 128 /* Bit 7 = 1 -> start register xfer */
|
||||
|
||||
/* LANCE registers */
|
||||
|
||||
#define LANCE_CSR0 0 /* Status/Control */
|
||||
|
||||
#define CSR0_ERR 0x8000 /* general error flag */
|
||||
#define CSR0_BABL 0x4000 /* transmitter timeout */
|
||||
#define CSR0_CERR 0x2000 /* collision error */
|
||||
#define CSR0_MISS 0x1000 /* lost Rx block */
|
||||
#define CSR0_MERR 0x0800 /* memory access error */
|
||||
#define CSR0_RINT 0x0400 /* receiver interrupt */
|
||||
#define CSR0_TINT 0x0200 /* transmitter interrupt */
|
||||
#define CSR0_IDON 0x0100 /* initialization done */
|
||||
#define CSR0_INTR 0x0080 /* general interrupt flag */
|
||||
#define CSR0_INEA 0x0040 /* interrupt enable */
|
||||
#define CSR0_RXON 0x0020 /* receiver enabled */
|
||||
#define CSR0_TXON 0x0010 /* transmitter enabled */
|
||||
#define CSR0_TDMD 0x0008 /* force transmission now */
|
||||
#define CSR0_STOP 0x0004 /* stop LANCE */
|
||||
#define CSR0_STRT 0x0002 /* start LANCE */
|
||||
#define CSR0_INIT 0x0001 /* read initialization block */
|
||||
|
||||
#define LANCE_CSR1 1 /* addr bit 0..15 of initialization */
|
||||
#define LANCE_CSR2 2 /* 16..23 block */
|
||||
|
||||
#define LANCE_CSR3 3 /* Bus control */
|
||||
#define CSR3_BCON_HOLD 0 /* Bit 0 = 0 -> BM1,BM0,HOLD */
|
||||
#define CSR3_BCON_BUSRQ 1 /* Bit 0 = 1 -> BUSAK0,BYTE,BUSRQ */
|
||||
#define CSR3_ALE_HIGH 0 /* Bit 1 = 0 -> ALE asserted high */
|
||||
#define CSR3_ALE_LOW 2 /* Bit 1 = 1 -> ALE asserted low */
|
||||
#define CSR3_BSWAP_OFF 0 /* Bit 2 = 0 -> no byte swap */
|
||||
#define CSR3_BSWAP_ON 4 /* Bit 2 = 1 -> byte swap */
|
||||
|
||||
/* LANCE structures */
|
||||
|
||||
typedef struct { /* LANCE initialization block */
|
||||
u16 Mode; /* mode flags */
|
||||
u8 PAdr[6]; /* MAC address */
|
||||
u8 LAdrF[8]; /* Multicast filter */
|
||||
u32 RdrP; /* Receive descriptor */
|
||||
u32 TdrP; /* Transmit descriptor */
|
||||
} LANCE_InitBlock;
|
||||
|
||||
/* Mode flags init block */
|
||||
|
||||
#define LANCE_INIT_PROM 0x8000 /* enable promiscous mode */
|
||||
#define LANCE_INIT_INTL 0x0040 /* internal loopback */
|
||||
#define LANCE_INIT_DRTY 0x0020 /* disable retry */
|
||||
#define LANCE_INIT_COLL 0x0010 /* force collision */
|
||||
#define LANCE_INIT_DTCR 0x0008 /* disable transmit CRC */
|
||||
#define LANCE_INIT_LOOP 0x0004 /* loopback */
|
||||
#define LANCE_INIT_DTX 0x0002 /* disable transmitter */
|
||||
#define LANCE_INIT_DRX 0x0001 /* disable receiver */
|
||||
|
||||
typedef struct { /* LANCE Tx descriptor */
|
||||
u16 LowAddr; /* bit 0..15 of address */
|
||||
u16 Flags; /* bit 16..23 of address + Flags */
|
||||
u16 Len; /* 2s complement of packet length */
|
||||
u16 Status; /* Result of transmission */
|
||||
} LANCE_TxDescr;
|
||||
|
||||
#define TXDSCR_FLAGS_OWN 0x8000 /* LANCE owns descriptor */
|
||||
#define TXDSCR_FLAGS_ERR 0x4000 /* summary error flag */
|
||||
#define TXDSCR_FLAGS_MORE 0x1000 /* more than one retry needed? */
|
||||
#define TXDSCR_FLAGS_ONE 0x0800 /* one retry? */
|
||||
#define TXDSCR_FLAGS_DEF 0x0400 /* transmission deferred? */
|
||||
#define TXDSCR_FLAGS_STP 0x0200 /* first packet in chain? */
|
||||
#define TXDSCR_FLAGS_ENP 0x0100 /* last packet in chain? */
|
||||
|
||||
#define TXDSCR_STATUS_BUFF 0x8000 /* buffer error? */
|
||||
#define TXDSCR_STATUS_UFLO 0x4000 /* silo underflow during transmit? */
|
||||
#define TXDSCR_STATUS_LCOL 0x1000 /* late collision? */
|
||||
#define TXDSCR_STATUS_LCAR 0x0800 /* loss of carrier? */
|
||||
#define TXDSCR_STATUS_RTRY 0x0400 /* retry error? */
|
||||
|
||||
typedef struct { /* LANCE Rx descriptor */
|
||||
u16 LowAddr; /* bit 0..15 of address */
|
||||
u16 Flags; /* bit 16..23 of address + Flags */
|
||||
u16 MaxLen; /* 2s complement of buffer length */
|
||||
u16 Len; /* packet length */
|
||||
} LANCE_RxDescr;
|
||||
|
||||
#define RXDSCR_FLAGS_OWN 0x8000 /* LANCE owns descriptor */
|
||||
#define RXDSCR_FLAGS_ERR 0x4000 /* summary error flag */
|
||||
#define RXDSCR_FLAGS_FRAM 0x2000 /* framing error flag */
|
||||
#define RXDSCR_FLAGS_OFLO 0x1000 /* FIFO overflow? */
|
||||
#define RXDSCR_FLAGS_CRC 0x0800 /* CRC error? */
|
||||
#define RXDSCR_FLAGS_BUFF 0x0400 /* buffer error? */
|
||||
#define RXDSCR_FLAGS_STP 0x0200 /* first packet in chain? */
|
||||
#define RXDCSR_FLAGS_ENP 0x0100 /* last packet in chain? */
|
||||
|
||||
/* RAM layout */
|
||||
|
||||
#define TXCOUNT 4 /* length of TX descriptor queue */
|
||||
#define LTXCOUNT 2 /* log2 of it */
|
||||
#define RXCOUNT 4 /* length of RX descriptor queue */
|
||||
#define LRXCOUNT 2 /* log2 of it */
|
||||
|
||||
#define RAM_INITBASE 0 /* LANCE init block */
|
||||
#define RAM_TXBASE 24 /* Start of TX descriptor queue */
|
||||
#define RAM_RXBASE \
|
||||
(RAM_TXBASE + (TXCOUNT * 8)) /* Start of RX descriptor queue */
|
||||
#define RAM_DATABASE \
|
||||
(RAM_RXBASE + (RXCOUNT * 8)) /* Start of data area for frames */
|
||||
#define RAM_BUFSIZE 1580 /* max. frame size - should never be
|
||||
reached */
|
||||
|
||||
#endif /* _SK_MCA_DRIVER_ */
|
||||
|
||||
#endif /* _SK_MCA_INCLUDE_ */
|
||||
Loading…
Reference in New Issue
Block a user