ntfs: Convert ntfs to read_folio

This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

fs/ntfs/aops.c

@@ -159,7 +159,7 @@ still_busy:
  *
  * Return 0 on success and -errno on error.
  *
- * Contains an adapted version of fs/buffer.c::block_read_full_page().
+ * Contains an adapted version of fs/buffer.c::block_read_full_folio().
  */
 static int ntfs_read_block(struct page *page)
 {
@@ -358,16 +358,16 @@ handle_zblock:
 }
 
 /**
- * ntfs_readpage - fill a @page of a @file with data from the device
- * @file:	open file to which the page @page belongs or NULL
- * @page:	page cache page to fill with data
+ * ntfs_read_folio - fill a @folio of a @file with data from the device
+ * @file:	open file to which the folio @folio belongs or NULL
+ * @folio:	page cache folio to fill with data
  *
- * For non-resident attributes, ntfs_readpage() fills the @page of the open
- * file @file by calling the ntfs version of the generic block_read_full_page()
+ * For non-resident attributes, ntfs_read_folio() fills the @folio of the open
+ * file @file by calling the ntfs version of the generic block_read_full_folio()
  * function, ntfs_read_block(), which in turn creates and reads in the buffers
- * associated with the page asynchronously.
+ * associated with the folio asynchronously.
  *
- * For resident attributes, OTOH, ntfs_readpage() fills @page by copying the
+ * For resident attributes, OTOH, ntfs_read_folio() fills @folio by copying the
  * data from the mft record (which at this stage is most likely in memory) and
  * fills the remainder with zeroes. Thus, in this case, I/O is synchronous, as
  * even if the mft record is not cached at this point in time, we need to wait
@@ -375,8 +375,9 @@ handle_zblock:
  *
  * Return 0 on success and -errno on error.
  */
-static int ntfs_readpage(struct file *file, struct page *page)
+static int ntfs_read_folio(struct file *file, struct folio *folio)
 {
+	struct page *page = &folio->page;
 	loff_t i_size;
 	struct inode *vi;
 	ntfs_inode *ni, *base_ni;
@@ -458,7 +459,7 @@ retry_readpage:
 	}
 	/*
 	 * If a parallel write made the attribute non-resident, drop the mft
-	 * record and retry the readpage.
+	 * record and retry the read_folio.
 	 */
 	if (unlikely(NInoNonResident(ni))) {
 		unmap_mft_record(base_ni);
@@ -637,10 +638,11 @@ static int ntfs_write_block(struct page *page, struct writeback_control *wbc)
 		if (unlikely((block >= iblock) &&
 				(initialized_size < i_size))) {
 			/*
-			 * If this page is fully outside initialized size, zero
-			 * out all pages between the current initialized size
-			 * and the current page. Just use ntfs_readpage() to do
-			 * the zeroing transparently.
+			 * If this page is fully outside initialized
+			 * size, zero out all pages between the current
+			 * initialized size and the current page. Just
+			 * use ntfs_read_folio() to do the zeroing
+			 * transparently.
 			 */
 			if (block > iblock) {
 				// TODO:
@@ -798,7 +800,7 @@ lock_retry_remap:
 	/* For the error case, need to reset bh to the beginning. */
 	bh = head;
 
-	/* Just an optimization, so ->readpage() is not called later. */
+	/* Just an optimization, so ->read_folio() is not called later. */
 	if (unlikely(!PageUptodate(page))) {
 		int uptodate = 1;
 		do {
@@ -1329,7 +1331,7 @@ done:
  * vfs inode dirty code path for the inode the mft record belongs to or via the
  * vm page dirty code path for the page the mft record is in.
  *
- * Based on ntfs_readpage() and fs/buffer.c::block_write_full_page().
+ * Based on ntfs_read_folio() and fs/buffer.c::block_write_full_page().
  *
  * Return 0 on success and -errno on error.
  */
@@ -1651,7 +1653,7 @@ hole:
  * attributes.
  */
 const struct address_space_operations ntfs_normal_aops = {
-	.readpage	= ntfs_readpage,
+	.read_folio	= ntfs_read_folio,
 #ifdef NTFS_RW
 	.writepage	= ntfs_writepage,
 	.dirty_folio	= block_dirty_folio,
@@ -1666,7 +1668,7 @@ const struct address_space_operations ntfs_normal_aops = {
  * ntfs_compressed_aops - address space operations for compressed inodes
  */
 const struct address_space_operations ntfs_compressed_aops = {
-	.readpage	= ntfs_readpage,
+	.read_folio	= ntfs_read_folio,
 #ifdef NTFS_RW
 	.writepage	= ntfs_writepage,
 	.dirty_folio	= block_dirty_folio,
@@ -1681,7 +1683,7 @@ const struct address_space_operations ntfs_compressed_aops = {
  *		   and attributes
  */
 const struct address_space_operations ntfs_mst_aops = {
-	.readpage	= ntfs_readpage,	/* Fill page with data. */
+	.read_folio	= ntfs_read_folio,	/* Fill page with data. */
 #ifdef NTFS_RW
 	.writepage	= ntfs_writepage,	/* Write dirty page to disk. */
 	.dirty_folio	= filemap_dirty_folio,

fs/ntfs/aops.h

@@ -37,9 +37,9 @@ static inline void ntfs_unmap_page(struct page *page)
  * Read a page from the page cache of the address space @mapping at position
  * @index, where @index is in units of PAGE_SIZE, and not in bytes.
  *
- * If the page is not in memory it is loaded from disk first using the readpage
- * method defined in the address space operations of @mapping and the page is
- * added to the page cache of @mapping in the process.
+ * If the page is not in memory it is loaded from disk first using the
+ * read_folio method defined in the address space operations of @mapping
+ * and the page is added to the page cache of @mapping in the process.
  *
  * If the page belongs to an mst protected attribute and it is marked as such
  * in its ntfs inode (NInoMstProtected()) the mst fixups are applied but no

fs/ntfs/attrib.c

@@ -1719,7 +1719,7 @@ int ntfs_attr_make_non_resident(ntfs_inode *ni, const u32 data_size)
 		vi->i_blocks = ni->allocated_size >> 9;
 	write_unlock_irqrestore(&ni->size_lock, flags);
 	/*
-	 * This needs to be last since the address space operations ->readpage
+	 * This needs to be last since the address space operations ->read_folio
 	 * and ->writepage can run concurrently with us as they are not
 	 * serialized on i_mutex.  Note, we are not allowed to fail once we flip
 	 * this switch, which is another reason to do this last.

fs/ntfs/file.c

@@ -251,14 +251,14 @@ do_non_resident_extend:
 		 *
 		 * TODO: For sparse pages could optimize this workload by using
 		 * the FsMisc / MiscFs page bit as a "PageIsSparse" bit.  This
-		 * would be set in readpage for sparse pages and here we would
+		 * would be set in read_folio for sparse pages and here we would
 		 * not need to mark dirty any pages which have this bit set.
 		 * The only caveat is that we have to clear the bit everywhere
 		 * where we allocate any clusters that lie in the page or that
 		 * contain the page.
 		 *
 		 * TODO: An even greater optimization would be for us to only
-		 * call readpage() on pages which are not in sparse regions as
+		 * call read_folio() on pages which are not in sparse regions as
 		 * determined from the runlist.  This would greatly reduce the
 		 * number of pages we read and make dirty in the case of sparse
 		 * files.

fs/ntfs/inode.c

@@ -1832,7 +1832,7 @@ int ntfs_read_inode_mount(struct inode *vi)
 	/* Need this to sanity check attribute list references to $MFT. */
 	vi->i_generation = ni->seq_no = le16_to_cpu(m->sequence_number);
 
-	/* Provides readpage() for map_mft_record(). */
+	/* Provides read_folio() for map_mft_record(). */
 	vi->i_mapping->a_ops = &ntfs_mst_aops;
 
 	ctx = ntfs_attr_get_search_ctx(ni, m);
@@ -2503,7 +2503,7 @@ retry_truncate:
 		 * between the old data_size, i.e. old_size, and the new_size
 		 * has not been zeroed.  Fortunately, we do not need to zero it
 		 * either since on one hand it will either already be zero due
-		 * to both readpage and writepage clearing partial page data
+		 * to both read_folio and writepage clearing partial page data
 		 * beyond i_size in which case there is nothing to do or in the
 		 * case of the file being mmap()ped at the same time, POSIX
 		 * specifies that the behaviour is unspecified thus we do not

fs/ntfs/mft.h

@@ -79,7 +79,7 @@ extern int write_mft_record_nolock(ntfs_inode *ni, MFT_RECORD *m, int sync);
  * paths and via the page cache write back code paths or between writing
  * neighbouring mft records residing in the same page.
  *
- * Locking the page also serializes us against ->readpage() if the page is not
+ * Locking the page also serializes us against ->read_folio() if the page is not
  * uptodate.
  *
  * On success, clean the mft record and return 0.  On error, leave the mft