PCI: dwc: Use FIELD_GET/PREP()

Convert open-coded variants of PCI field access into FIELD_GET/PREP()
to make the code easier to understand.

Add two missing defines into pci_regs.h. Logically, the Max No-Snoop
Latency Register is a separate word sized register in the PCIe spec,
but the pre-existing LTR defines in pci_regs.h with dword long values
seem to consider the registers together (the same goes for the only
user). Thus, follow the custom and make the new values also take both
word long LTR registers as a joint dword register.

Link: https://lore.kernel.org/r/20231024110336.26264-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This commit is contained in:
Ilpo Järvinen 2023-10-24 14:03:36 +03:00 committed by Bjorn Helgaas
parent b09d0f98a4
commit 92af77ca26
3 changed files with 13 additions and 6 deletions

View File

@ -6,6 +6,7 @@
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
#include <linux/bitfield.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@ -334,7 +335,7 @@ static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
if (!(val & PCI_MSI_FLAGS_ENABLE))
return -EINVAL;
val = (val & PCI_MSI_FLAGS_QSIZE) >> 4;
val = FIELD_GET(PCI_MSI_FLAGS_QSIZE, val);
return val;
}
@ -357,7 +358,7 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
reg = ep_func->msi_cap + func_offset + PCI_MSI_FLAGS;
val = dw_pcie_readw_dbi(pci, reg);
val &= ~PCI_MSI_FLAGS_QMASK;
val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
val |= FIELD_PREP(PCI_MSI_FLAGS_QMASK, interrupts);
dw_pcie_dbi_ro_wr_en(pci);
dw_pcie_writew_dbi(pci, reg, val);
dw_pcie_dbi_ro_wr_dis(pci);
@ -584,7 +585,7 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
reg = ep_func->msix_cap + func_offset + PCI_MSIX_TABLE;
tbl_offset = dw_pcie_readl_dbi(pci, reg);
bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
bir = FIELD_GET(PCI_MSIX_TABLE_BIR, tbl_offset);
tbl_offset &= PCI_MSIX_TABLE_OFFSET;
msix_tbl = ep->epf_bar[bir]->addr + tbl_offset;

View File

@ -126,7 +126,7 @@
#define APPL_LTR_MSG_1 0xC4
#define LTR_MSG_REQ BIT(15)
#define LTR_MST_NO_SNOOP_SHIFT 16
#define LTR_NOSNOOP_MSG_REQ BIT(31)
#define APPL_LTR_MSG_2 0xC8
#define APPL_LTR_MSG_2_LTR_MSG_REQ_STATE BIT(3)
@ -496,8 +496,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
ktime_t timeout;
/* 110us for both snoop and no-snoop */
val = 110 | (2 << PCI_LTR_SCALE_SHIFT) | LTR_MSG_REQ;
val |= (val << LTR_MST_NO_SNOOP_SHIFT);
val = FIELD_PREP(PCI_LTR_VALUE_MASK, 110) |
FIELD_PREP(PCI_LTR_SCALE_MASK, 2) |
LTR_MSG_REQ |
FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, 110) |
FIELD_PREP(PCI_LTR_NOSNOOP_SCALE, 2) |
LTR_NOSNOOP_MSG_REQ;
appl_writel(pcie, val, APPL_LTR_MSG_1);
/* Send LTR upstream */

View File

@ -975,6 +975,8 @@
#define PCI_LTR_VALUE_MASK 0x000003ff
#define PCI_LTR_SCALE_MASK 0x00001c00
#define PCI_LTR_SCALE_SHIFT 10
#define PCI_LTR_NOSNOOP_VALUE 0x03ff0000 /* Max No-Snoop Latency Value */
#define PCI_LTR_NOSNOOP_SCALE 0x1c000000 /* Scale for Max Value */
#define PCI_EXT_CAP_LTR_SIZEOF 8
/* Access Control Service */