dt-bindings: input: Goodix SPI HID Touchscreen

The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit is contained in:
Charles Wang 2024-08-14 10:45:13 +08:00 committed by Jiri Kosina
parent 75e16c8ce2
commit 9184b17fbc

View File

@ -0,0 +1,71 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/goodix,gt7986u.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: GOODIX GT7986U SPI HID Touchscreen
maintainers:
- Charles Wang <charles.goodix@gmail.com>
description: Supports the Goodix GT7986U touchscreen.
This touch controller reports data packaged according to the HID protocol,
but is incompatible with Microsoft's HID-over-SPI protocol.
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
compatible:
enum:
- goodix,gt7986u
reg:
maxItems: 1
interrupts:
maxItems: 1
reset-gpios:
maxItems: 1
goodix,hid-report-addr:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The register address for retrieving HID report data.
This address is related to the device firmware and may
change after a firmware update.
spi-max-frequency: true
additionalProperties: false
required:
- compatible
- reg
- interrupts
- reset-gpios
- goodix,hid-report-addr
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
touchscreen@0 {
compatible = "goodix,gt7986u";
reg = <0>;
interrupt-parent = <&gpio>;
interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
spi-max-frequency = <10000000>;
goodix,hid-report-addr = <0x22c8c>;
};
};
...