From f19fe8f354a6e7c2b9588f83af4876e34f0ce83e Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 8 Apr 2022 21:37:03 -0700 Subject: [PATCH 01/13] Revert "scsi: scsi_debug: Address races following module load" Revert the patch mentioned in the subject since it blocks I/O after module unload has started while this is a legitimate use case. For e.g. blktests test case srp/001 that patch causes a command timeout to be triggered for the following call stack: __schedule+0x4c3/0xd20 schedule+0x82/0x110 schedule_timeout+0x122/0x200 io_schedule_timeout+0x7b/0xc0 __wait_for_common+0x2bc/0x380 wait_for_completion_io_timeout+0x1d/0x20 blk_execute_rq+0x1db/0x200 __scsi_execute+0x1fb/0x310 sd_sync_cache+0x155/0x2c0 [sd_mod] sd_shutdown+0xbb/0x190 [sd_mod] sd_remove+0x5b/0x80 [sd_mod] device_remove+0x9a/0xb0 device_release_driver_internal+0x2c5/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1aa/0x270 device_del+0x2d4/0x640 __scsi_remove_device+0x168/0x1a0 scsi_forget_host+0xa8/0xb0 scsi_remove_host+0x9b/0x150 sdebug_driver_remove+0x3d/0x140 [scsi_debug] device_remove+0x6f/0xb0 device_release_driver_internal+0x2c5/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1aa/0x270 device_del+0x2d4/0x640 device_unregister+0x18/0x70 sdebug_do_remove_host+0x138/0x180 [scsi_debug] scsi_debug_exit+0x45/0xd5 [scsi_debug] __do_sys_delete_module.constprop.0+0x210/0x320 __x64_sys_delete_module+0x1f/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lore.kernel.org/r/20220409043704.28573-1-bvanassche@acm.org Fixes: 2aad3cd85370 ("scsi: scsi_debug: Address races following module load") Cc: Douglas Gilbert Cc: Yi Zhang Cc: Bob Pearson Reported-by: Yi Zhang Tested-by: Yi Zhang Acked-by: Douglas Gilbert Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 197 ++++++++++---------------------------- 1 file changed, 51 insertions(+), 146 deletions(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index ff78ef702f22..592a290e6cfa 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include @@ -732,9 +731,7 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEM_P1 + 1] = { {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} }, }; -static atomic_t sdebug_num_hosts; -static DEFINE_MUTEX(add_host_mutex); - +static int sdebug_num_hosts; static int sdebug_add_host = DEF_NUM_HOST; /* in sysfs this is relative */ static int sdebug_ato = DEF_ATO; static int sdebug_cdb_len = DEF_CDB_LEN; @@ -781,7 +778,6 @@ static int sdebug_uuid_ctl = DEF_UUID_CTL; static bool sdebug_random = DEF_RANDOM; static bool sdebug_per_host_store = DEF_PER_HOST_STORE; static bool sdebug_removable = DEF_REMOVABLE; -static bool sdebug_deflect_incoming; static bool sdebug_clustering; static bool sdebug_host_lock = DEF_HOST_LOCK; static bool sdebug_strict = DEF_STRICT; @@ -5122,10 +5118,6 @@ static int scsi_debug_slave_configure(struct scsi_device *sdp) sdp->host->host_no, sdp->channel, sdp->id, sdp->lun); if (sdp->host->max_cmd_len != SDEBUG_MAX_CMD_LEN) sdp->host->max_cmd_len = SDEBUG_MAX_CMD_LEN; - if (smp_load_acquire(&sdebug_deflect_incoming)) { - pr_info("Exit early due to deflect_incoming\n"); - return 1; - } if (devip == NULL) { devip = find_build_dev_info(sdp); if (devip == NULL) @@ -5211,7 +5203,7 @@ static bool stop_queued_cmnd(struct scsi_cmnd *cmnd) } /* Deletes (stops) timers or work queues of all queued commands */ -static void stop_all_queued(bool done_with_no_conn) +static void stop_all_queued(void) { unsigned long iflags; int j, k; @@ -5220,15 +5212,13 @@ static void stop_all_queued(bool done_with_no_conn) struct sdebug_queued_cmd *sqcp; struct sdebug_dev_info *devip; struct sdebug_defer *sd_dp; - struct scsi_cmnd *scp; for (j = 0, sqp = sdebug_q_arr; j < submit_queues; ++j, ++sqp) { spin_lock_irqsave(&sqp->qc_lock, iflags); for (k = 0; k < SDEBUG_CANQUEUE; ++k) { if (test_bit(k, sqp->in_use_bm)) { sqcp = &sqp->qc_arr[k]; - scp = sqcp->a_cmnd; - if (!scp) + if (sqcp->a_cmnd == NULL) continue; devip = (struct sdebug_dev_info *) sqcp->a_cmnd->device->hostdata; @@ -5243,10 +5233,6 @@ static void stop_all_queued(bool done_with_no_conn) l_defer_t = SDEB_DEFER_NONE; spin_unlock_irqrestore(&sqp->qc_lock, iflags); stop_qc_helper(sd_dp, l_defer_t); - if (done_with_no_conn && l_defer_t != SDEB_DEFER_NONE) { - scp->result = DID_NO_CONNECT << 16; - scsi_done(scp); - } clear_bit(k, sqp->in_use_bm); spin_lock_irqsave(&sqp->qc_lock, iflags); } @@ -5389,7 +5375,7 @@ static int scsi_debug_host_reset(struct scsi_cmnd *SCpnt) } } spin_unlock(&sdebug_host_list_lock); - stop_all_queued(false); + stop_all_queued(); if (SDEBUG_OPT_RESET_NOISE & sdebug_opts) sdev_printk(KERN_INFO, SCpnt->device, "%s: %d device(s) found\n", __func__, k); @@ -5449,50 +5435,13 @@ static void sdebug_build_parts(unsigned char *ramp, unsigned long store_size) } } -static void sdeb_block_all_queues(void) +static void block_unblock_all_queues(bool block) { int j; struct sdebug_queue *sqp; for (j = 0, sqp = sdebug_q_arr; j < submit_queues; ++j, ++sqp) - atomic_set(&sqp->blocked, (int)true); -} - -static void sdeb_unblock_all_queues(void) -{ - int j; - struct sdebug_queue *sqp; - - for (j = 0, sqp = sdebug_q_arr; j < submit_queues; ++j, ++sqp) - atomic_set(&sqp->blocked, (int)false); -} - -static void -sdeb_add_n_hosts(int num_hosts) -{ - if (num_hosts < 1) - return; - do { - bool found; - unsigned long idx; - struct sdeb_store_info *sip; - bool want_phs = (sdebug_fake_rw == 0) && sdebug_per_host_store; - - found = false; - if (want_phs) { - xa_for_each_marked(per_store_ap, idx, sip, SDEB_XA_NOT_IN_USE) { - sdeb_most_recent_idx = (int)idx; - found = true; - break; - } - if (found) /* re-use case */ - sdebug_add_host_helper((int)idx); - else - sdebug_do_add_host(true /* make new store */); - } else { - sdebug_do_add_host(false); - } - } while (--num_hosts); + atomic_set(&sqp->blocked, (int)block); } /* Adjust (by rounding down) the sdebug_cmnd_count so abs(every_nth)-1 @@ -5505,10 +5454,10 @@ static void tweak_cmnd_count(void) modulo = abs(sdebug_every_nth); if (modulo < 2) return; - sdeb_block_all_queues(); + block_unblock_all_queues(true); count = atomic_read(&sdebug_cmnd_count); atomic_set(&sdebug_cmnd_count, (count / modulo) * modulo); - sdeb_unblock_all_queues(); + block_unblock_all_queues(false); } static void clear_queue_stats(void) @@ -5526,15 +5475,6 @@ static bool inject_on_this_cmd(void) return (atomic_read(&sdebug_cmnd_count) % abs(sdebug_every_nth)) == 0; } -static int process_deflect_incoming(struct scsi_cmnd *scp) -{ - u8 opcode = scp->cmnd[0]; - - if (opcode == SYNCHRONIZE_CACHE || opcode == SYNCHRONIZE_CACHE_16) - return 0; - return DID_NO_CONNECT << 16; -} - #define INCLUSIVE_TIMING_MAX_NS 1000000 /* 1 millisecond */ /* Complete the processing of the thread that queued a SCSI command to this @@ -5544,7 +5484,8 @@ static int process_deflect_incoming(struct scsi_cmnd *scp) */ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip, int scsi_result, - int (*pfp)(struct scsi_cmnd *, struct sdebug_dev_info *), + int (*pfp)(struct scsi_cmnd *, + struct sdebug_dev_info *), int delta_jiff, int ndelay) { bool new_sd_dp; @@ -5565,27 +5506,13 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip, } sdp = cmnd->device; - if (delta_jiff == 0) { - sqp = get_queue(cmnd); - if (atomic_read(&sqp->blocked)) { - if (smp_load_acquire(&sdebug_deflect_incoming)) - return process_deflect_incoming(cmnd); - else - return SCSI_MLQUEUE_HOST_BUSY; - } + if (delta_jiff == 0) goto respond_in_thread; - } sqp = get_queue(cmnd); spin_lock_irqsave(&sqp->qc_lock, iflags); if (unlikely(atomic_read(&sqp->blocked))) { spin_unlock_irqrestore(&sqp->qc_lock, iflags); - if (smp_load_acquire(&sdebug_deflect_incoming)) { - scsi_result = process_deflect_incoming(cmnd); - goto respond_in_thread; - } - if (sdebug_verbose) - pr_info("blocked --> SCSI_MLQUEUE_HOST_BUSY\n"); return SCSI_MLQUEUE_HOST_BUSY; } num_in_q = atomic_read(&devip->num_in_q); @@ -5774,12 +5701,8 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip, respond_in_thread: /* call back to mid-layer using invocation thread */ cmnd->result = pfp != NULL ? pfp(cmnd, devip) : 0; cmnd->result &= ~SDEG_RES_IMMED_MASK; - if (cmnd->result == 0 && scsi_result != 0) { + if (cmnd->result == 0 && scsi_result != 0) cmnd->result = scsi_result; - if (sdebug_verbose) - pr_info("respond_in_thread: tag=0x%x, scp->result=0x%x\n", - blk_mq_unique_tag(scsi_cmd_to_rq(cmnd)), scsi_result); - } scsi_done(cmnd); return 0; } @@ -6064,7 +5987,7 @@ static ssize_t delay_store(struct device_driver *ddp, const char *buf, int j, k; struct sdebug_queue *sqp; - sdeb_block_all_queues(); + block_unblock_all_queues(true); for (j = 0, sqp = sdebug_q_arr; j < submit_queues; ++j, ++sqp) { k = find_first_bit(sqp->in_use_bm, @@ -6078,7 +6001,7 @@ static ssize_t delay_store(struct device_driver *ddp, const char *buf, sdebug_jdelay = jdelay; sdebug_ndelay = 0; } - sdeb_unblock_all_queues(); + block_unblock_all_queues(false); } return res; } @@ -6104,7 +6027,7 @@ static ssize_t ndelay_store(struct device_driver *ddp, const char *buf, int j, k; struct sdebug_queue *sqp; - sdeb_block_all_queues(); + block_unblock_all_queues(true); for (j = 0, sqp = sdebug_q_arr; j < submit_queues; ++j, ++sqp) { k = find_first_bit(sqp->in_use_bm, @@ -6119,7 +6042,7 @@ static ssize_t ndelay_store(struct device_driver *ddp, const char *buf, sdebug_jdelay = ndelay ? JDELAY_OVERRIDDEN : DEF_JDELAY; } - sdeb_unblock_all_queues(); + block_unblock_all_queues(false); } return res; } @@ -6433,7 +6356,7 @@ static ssize_t max_queue_store(struct device_driver *ddp, const char *buf, if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n > 0) && (n <= SDEBUG_CANQUEUE) && (sdebug_host_max_queue == 0)) { - sdeb_block_all_queues(); + block_unblock_all_queues(true); k = 0; for (j = 0, sqp = sdebug_q_arr; j < submit_queues; ++j, ++sqp) { @@ -6448,7 +6371,7 @@ static ssize_t max_queue_store(struct device_driver *ddp, const char *buf, atomic_set(&retired_max_queue, k + 1); else atomic_set(&retired_max_queue, 0); - sdeb_unblock_all_queues(); + block_unblock_all_queues(false); return count; } return -EINVAL; @@ -6537,48 +6460,43 @@ static DRIVER_ATTR_RW(virtual_gb); static ssize_t add_host_show(struct device_driver *ddp, char *buf) { /* absolute number of hosts currently active is what is shown */ - return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&sdebug_num_hosts)); + return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_num_hosts); } -/* - * Accept positive and negative values. Hex values (only positive) may be prefixed by '0x'. - * To remove all hosts use a large negative number (e.g. -9999). The value 0 does nothing. - * Returns -EBUSY if another add_host sysfs invocation is active. - */ static ssize_t add_host_store(struct device_driver *ddp, const char *buf, size_t count) { + bool found; + unsigned long idx; + struct sdeb_store_info *sip; + bool want_phs = (sdebug_fake_rw == 0) && sdebug_per_host_store; int delta_hosts; - if (count == 0 || kstrtoint(buf, 0, &delta_hosts)) + if (sscanf(buf, "%d", &delta_hosts) != 1) return -EINVAL; - if (sdebug_verbose) - pr_info("prior num_hosts=%d, num_to_add=%d\n", - atomic_read(&sdebug_num_hosts), delta_hosts); - if (delta_hosts == 0) - return count; - if (mutex_trylock(&add_host_mutex) == 0) - return -EBUSY; if (delta_hosts > 0) { - sdeb_add_n_hosts(delta_hosts); - } else if (delta_hosts < 0) { - smp_store_release(&sdebug_deflect_incoming, true); - sdeb_block_all_queues(); - if (delta_hosts >= atomic_read(&sdebug_num_hosts)) - stop_all_queued(true); do { - if (atomic_read(&sdebug_num_hosts) < 1) { - free_all_queued(); - break; + found = false; + if (want_phs) { + xa_for_each_marked(per_store_ap, idx, sip, + SDEB_XA_NOT_IN_USE) { + sdeb_most_recent_idx = (int)idx; + found = true; + break; + } + if (found) /* re-use case */ + sdebug_add_host_helper((int)idx); + else + sdebug_do_add_host(true); + } else { + sdebug_do_add_host(false); } + } while (--delta_hosts); + } else if (delta_hosts < 0) { + do { sdebug_do_remove_host(false); } while (++delta_hosts); - sdeb_unblock_all_queues(); - smp_store_release(&sdebug_deflect_incoming, false); } - mutex_unlock(&add_host_mutex); - if (sdebug_verbose) - pr_info("post num_hosts=%d\n", atomic_read(&sdebug_num_hosts)); return count; } static DRIVER_ATTR_RW(add_host); @@ -7089,10 +7007,6 @@ static int __init scsi_debug_init(void) sdebug_add_host = 0; for (k = 0; k < hosts_to_add; k++) { - if (smp_load_acquire(&sdebug_deflect_incoming)) { - pr_info("exit early as sdebug_deflect_incoming is set\n"); - return 0; - } if (want_store && k == 0) { ret = sdebug_add_host_helper(idx); if (ret < 0) { @@ -7110,12 +7024,8 @@ static int __init scsi_debug_init(void) } } if (sdebug_verbose) - pr_info("built %d host(s)\n", atomic_read(&sdebug_num_hosts)); + pr_info("built %d host(s)\n", sdebug_num_hosts); - /* - * Even though all the hosts have been established, due to async device (LU) scanning - * by the scsi mid-level, there may still be devices (LUs) being set up. - */ return 0; bus_unreg: @@ -7131,17 +7041,12 @@ free_q_arr: static void __exit scsi_debug_exit(void) { - int k; + int k = sdebug_num_hosts; - /* Possible race with LUs still being set up; stop them asap */ - sdeb_block_all_queues(); - smp_store_release(&sdebug_deflect_incoming, true); - stop_all_queued(false); - for (k = 0; atomic_read(&sdebug_num_hosts) > 0; k++) + stop_all_queued(); + for (; k; k--) sdebug_do_remove_host(true); free_all_queued(); - if (sdebug_verbose) - pr_info("removed %d hosts\n", k); driver_unregister(&sdebug_driverfs_driver); bus_unregister(&pseudo_lld_bus); root_device_unregister(pseudo_primary); @@ -7311,13 +7216,13 @@ static int sdebug_add_host_helper(int per_host_idx) sdbg_host->dev.bus = &pseudo_lld_bus; sdbg_host->dev.parent = pseudo_primary; sdbg_host->dev.release = &sdebug_release_adapter; - dev_set_name(&sdbg_host->dev, "adapter%d", atomic_read(&sdebug_num_hosts)); + dev_set_name(&sdbg_host->dev, "adapter%d", sdebug_num_hosts); error = device_register(&sdbg_host->dev); if (error) goto clean; - atomic_inc(&sdebug_num_hosts); + ++sdebug_num_hosts; return 0; clean: @@ -7381,7 +7286,7 @@ static void sdebug_do_remove_host(bool the_end) return; device_unregister(&sdbg_host->dev); - atomic_dec(&sdebug_num_hosts); + --sdebug_num_hosts; } static int sdebug_change_qdepth(struct scsi_device *sdev, int qdepth) @@ -7389,10 +7294,10 @@ static int sdebug_change_qdepth(struct scsi_device *sdev, int qdepth) int num_in_q = 0; struct sdebug_dev_info *devip; - sdeb_block_all_queues(); + block_unblock_all_queues(true); devip = (struct sdebug_dev_info *)sdev->hostdata; if (NULL == devip) { - sdeb_unblock_all_queues(); + block_unblock_all_queues(false); return -ENODEV; } num_in_q = atomic_read(&devip->num_in_q); @@ -7411,7 +7316,7 @@ static int sdebug_change_qdepth(struct scsi_device *sdev, int qdepth) sdev_printk(KERN_INFO, sdev, "%s: qdepth=%d, num_in_q=%d\n", __func__, qdepth, num_in_q); } - sdeb_unblock_all_queues(); + block_unblock_all_queues(false); return sdev->queue_depth; } From 294080eacf92a0781e6d43663448a55001ec8c64 Mon Sep 17 00:00:00 2001 From: Ajish Koshy Date: Mon, 11 Apr 2022 12:16:02 +0530 Subject: [PATCH 02/13] scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63 When upper inbound and outbound queues 32-63 are enabled, we see upper vectors 32-63 in interrupt service routine. We need corresponding registers to handle masking and unmasking of these upper interrupts. To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit 0-31 represents interrupt vectors 32-63. Link: https://lore.kernel.org/r/20220411064603.668448-2-Ajish.Koshy@microchip.com Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: John Garry Acked-by: Jack Wang Signed-off-by: Ajish Koshy Signed-off-by: Viswas G Signed-off-by: Martin K. Petersen --- drivers/scsi/pm8001/pm80xx_hwi.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index f90b707c190b..f13e2ed90699 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -1727,10 +1727,11 @@ static void pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) { #ifdef PM8001_USE_MSIX - u32 mask; - mask = (u32)(1 << vec); - - pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, (u32)(mask & 0xFFFFFFFF)); + if (vec < 32) + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, 1U << vec); + else + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR_U, + 1U << (vec - 32)); return; #endif pm80xx_chip_intx_interrupt_enable(pm8001_ha); @@ -1746,12 +1747,15 @@ static void pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec) { #ifdef PM8001_USE_MSIX - u32 mask; - if (vec == 0xFF) - mask = 0xFFFFFFFF; + if (vec == 0xFF) { + /* disable all vectors 0-31, 32-63 */ + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 0xFFFFFFFF); + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U, 0xFFFFFFFF); + } else if (vec < 32) + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 1U << vec); else - mask = (u32)(1 << vec); - pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, (u32)(mask & 0xFFFFFFFF)); + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U, + 1U << (vec - 32)); return; #endif pm80xx_chip_intx_interrupt_disable(pm8001_ha); From bcd8a45223470e00b5f254018174d64a75db4bbe Mon Sep 17 00:00:00 2001 From: Ajish Koshy Date: Mon, 11 Apr 2022 12:16:03 +0530 Subject: [PATCH 03/13] scsi: pm80xx: Enable upper inbound, outbound queues Executing driver on servers with more than 32 CPUs were faced with command timeouts. This is because we were not geting completions for commands submitted on IQ32 - IQ63. Set E64Q bit to enable upper inbound and outbound queues 32 to 63 in the MPI main configuration table. Added 500ms delay after successful MPI initialization as mentioned in controller datasheet. Link: https://lore.kernel.org/r/20220411064603.668448-3-Ajish.Koshy@microchip.com Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: Damien Le Moal Acked-by: Jack Wang Signed-off-by: Ajish Koshy Signed-off-by: Viswas G Signed-off-by: Martin K. Petersen --- drivers/scsi/pm8001/pm80xx_hwi.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index f13e2ed90699..01c5e8ff4cc5 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -766,6 +766,10 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity = 0x01; pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt = 0x01; + /* Enable higher IQs and OQs, 32 to 63, bit 16 */ + if (pm8001_ha->max_q_num > 32) + pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |= + 1 << 16; /* Disable end to end CRC checking */ pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump = (0x1 << 16); @@ -1027,6 +1031,13 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha) if (0x0000 != gst_len_mpistate) return -EBUSY; + /* + * As per controller datasheet, after successful MPI + * initialization minimum 500ms delay is required before + * issuing commands. + */ + msleep(500); + return 0; } From c34f95e98d8fb750eefd4f3fe58b4f8b5e89253b Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:05 -0500 Subject: [PATCH 04/13] scsi: iscsi: Move iscsi_ep_disconnect() This patch moves iscsi_ep_disconnect() so it can be called earlier in the next patch. Link: https://lore.kernel.org/r/20220408001314.5014-2-michael.christie@oracle.com Tested-by: Manish Rangankar Reviewed-by: Lee Duncan Reviewed-by: Chris Leech Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 38 ++++++++++++++--------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 27951ea05dd4..4e10457e3ab9 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2217,6 +2217,25 @@ static void iscsi_stop_conn(struct iscsi_cls_conn *conn, int flag) ISCSI_DBG_TRANS_CONN(conn, "Stopping conn done.\n"); } +static void iscsi_ep_disconnect(struct iscsi_cls_conn *conn, bool is_active) +{ + struct iscsi_cls_session *session = iscsi_conn_to_session(conn); + struct iscsi_endpoint *ep; + + ISCSI_DBG_TRANS_CONN(conn, "disconnect ep.\n"); + conn->state = ISCSI_CONN_FAILED; + + if (!conn->ep || !session->transport->ep_disconnect) + return; + + ep = conn->ep; + conn->ep = NULL; + + session->transport->unbind_conn(conn, is_active); + session->transport->ep_disconnect(ep); + ISCSI_DBG_TRANS_CONN(conn, "disconnect ep done.\n"); +} + static int iscsi_if_stop_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev) { @@ -2257,25 +2276,6 @@ static int iscsi_if_stop_conn(struct iscsi_transport *transport, return 0; } -static void iscsi_ep_disconnect(struct iscsi_cls_conn *conn, bool is_active) -{ - struct iscsi_cls_session *session = iscsi_conn_to_session(conn); - struct iscsi_endpoint *ep; - - ISCSI_DBG_TRANS_CONN(conn, "disconnect ep.\n"); - conn->state = ISCSI_CONN_FAILED; - - if (!conn->ep || !session->transport->ep_disconnect) - return; - - ep = conn->ep; - conn->ep = NULL; - - session->transport->unbind_conn(conn, is_active); - session->transport->ep_disconnect(ep); - ISCSI_DBG_TRANS_CONN(conn, "disconnect ep done.\n"); -} - static void iscsi_cleanup_conn_work_fn(struct work_struct *work) { struct iscsi_cls_conn *conn = container_of(work, struct iscsi_cls_conn, From cbd2283aaf47fef4ded4b29124b1ef3beb515f3a Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:06 -0500 Subject: [PATCH 05/13] scsi: iscsi: Fix offload conn cleanup when iscsid restarts When userspace restarts during boot or upgrades it won't know about the offload driver's endpoint and connection mappings. iscsid will start by cleaning up the old session by doing a stop_conn call. Later, if we are able to create a new connection, we clean up the old endpoint during the binding stage. The problem is that if we do stop_conn before doing the ep_disconnect call offload, drivers can still be executing I/O. We then might free tasks from the under the card/driver. This moves the ep_disconnect call to before we do the stop_conn call for this case. It will then work and look like a normal recovery/cleanup procedure from the driver's point of view. Link: https://lore.kernel.org/r/20220408001314.5014-3-michael.christie@oracle.com Tested-by: Manish Rangankar Reviewed-by: Lee Duncan Reviewed-by: Chris Leech Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 48 +++++++++++++++++------------ 1 file changed, 28 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 4e10457e3ab9..bf39fb5569b6 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2236,6 +2236,23 @@ static void iscsi_ep_disconnect(struct iscsi_cls_conn *conn, bool is_active) ISCSI_DBG_TRANS_CONN(conn, "disconnect ep done.\n"); } +static void iscsi_if_disconnect_bound_ep(struct iscsi_cls_conn *conn, + struct iscsi_endpoint *ep, + bool is_active) +{ + /* Check if this was a conn error and the kernel took ownership */ + if (!test_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags)) { + iscsi_ep_disconnect(conn, is_active); + } else { + ISCSI_DBG_TRANS_CONN(conn, "flush kernel conn cleanup.\n"); + mutex_unlock(&conn->ep_mutex); + + flush_work(&conn->cleanup_work); + + mutex_lock(&conn->ep_mutex); + } +} + static int iscsi_if_stop_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev) { @@ -2256,6 +2273,16 @@ static int iscsi_if_stop_conn(struct iscsi_transport *transport, cancel_work_sync(&conn->cleanup_work); iscsi_stop_conn(conn, flag); } else { + /* + * For offload, when iscsid is restarted it won't know about + * existing endpoints so it can't do a ep_disconnect. We clean + * it up here for userspace. + */ + mutex_lock(&conn->ep_mutex); + if (conn->ep) + iscsi_if_disconnect_bound_ep(conn, conn->ep, true); + mutex_unlock(&conn->ep_mutex); + /* * Figure out if it was the kernel or userspace initiating this. */ @@ -2984,16 +3011,7 @@ static int iscsi_if_ep_disconnect(struct iscsi_transport *transport, } mutex_lock(&conn->ep_mutex); - /* Check if this was a conn error and the kernel took ownership */ - if (test_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags)) { - ISCSI_DBG_TRANS_CONN(conn, "flush kernel conn cleanup.\n"); - mutex_unlock(&conn->ep_mutex); - - flush_work(&conn->cleanup_work); - goto put_ep; - } - - iscsi_ep_disconnect(conn, false); + iscsi_if_disconnect_bound_ep(conn, ep, false); mutex_unlock(&conn->ep_mutex); put_ep: iscsi_put_endpoint(ep); @@ -3704,16 +3722,6 @@ static int iscsi_if_transport_conn(struct iscsi_transport *transport, switch (nlh->nlmsg_type) { case ISCSI_UEVENT_BIND_CONN: - if (conn->ep) { - /* - * For offload boot support where iscsid is restarted - * during the pivot root stage, the ep will be intact - * here when the new iscsid instance starts up and - * reconnects. - */ - iscsi_ep_disconnect(conn, true); - } - session = iscsi_session_lookup(ev->u.b_conn.sid); if (!session) { err = -EINVAL; From 3c6ae371b8a1ffba1fc415989fd581ebf841ed0a Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:07 -0500 Subject: [PATCH 06/13] scsi: iscsi: Release endpoint ID when its freed We can't release the endpoint ID until all references to the endpoint have been dropped or it could be allocated while in use. This has us use an idr instead of looping over all conns to find a free ID and then free the ID when all references have been dropped instead of when the device is only deleted. Link: https://lore.kernel.org/r/20220408001314.5014-4-michael.christie@oracle.com Tested-by: Manish Rangankar Reviewed-by: Lee Duncan Reviewed-by: Chris Leech Reviewed-by: Wu Bo Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 71 ++++++++++++++--------------- include/scsi/scsi_transport_iscsi.h | 2 +- 2 files changed, 36 insertions(+), 37 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index bf39fb5569b6..1fc7c6bfbd67 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -86,6 +86,9 @@ struct iscsi_internal { struct transport_container session_cont; }; +static DEFINE_IDR(iscsi_ep_idr); +static DEFINE_MUTEX(iscsi_ep_idr_mutex); + static atomic_t iscsi_session_nr; /* sysfs session id for next new session */ static struct workqueue_struct *iscsi_conn_cleanup_workq; @@ -168,6 +171,11 @@ struct device_attribute dev_attr_##_prefix##_##_name = \ static void iscsi_endpoint_release(struct device *dev) { struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev); + + mutex_lock(&iscsi_ep_idr_mutex); + idr_remove(&iscsi_ep_idr, ep->id); + mutex_unlock(&iscsi_ep_idr_mutex); + kfree(ep); } @@ -180,7 +188,7 @@ static ssize_t show_ep_handle(struct device *dev, struct device_attribute *attr, char *buf) { struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev); - return sysfs_emit(buf, "%llu\n", (unsigned long long) ep->id); + return sysfs_emit(buf, "%d\n", ep->id); } static ISCSI_ATTR(ep, handle, S_IRUGO, show_ep_handle, NULL); @@ -193,48 +201,32 @@ static struct attribute_group iscsi_endpoint_group = { .attrs = iscsi_endpoint_attrs, }; -#define ISCSI_MAX_EPID -1 - -static int iscsi_match_epid(struct device *dev, const void *data) -{ - struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev); - const uint64_t *epid = data; - - return *epid == ep->id; -} - struct iscsi_endpoint * iscsi_create_endpoint(int dd_size) { - struct device *dev; struct iscsi_endpoint *ep; - uint64_t id; - int err; - - for (id = 1; id < ISCSI_MAX_EPID; id++) { - dev = class_find_device(&iscsi_endpoint_class, NULL, &id, - iscsi_match_epid); - if (!dev) - break; - else - put_device(dev); - } - if (id == ISCSI_MAX_EPID) { - printk(KERN_ERR "Too many connections. Max supported %u\n", - ISCSI_MAX_EPID - 1); - return NULL; - } + int err, id; ep = kzalloc(sizeof(*ep) + dd_size, GFP_KERNEL); if (!ep) return NULL; + mutex_lock(&iscsi_ep_idr_mutex); + id = idr_alloc(&iscsi_ep_idr, ep, 0, -1, GFP_NOIO); + if (id < 0) { + mutex_unlock(&iscsi_ep_idr_mutex); + printk(KERN_ERR "Could not allocate endpoint ID. Error %d.\n", + id); + goto free_ep; + } + mutex_unlock(&iscsi_ep_idr_mutex); + ep->id = id; ep->dev.class = &iscsi_endpoint_class; - dev_set_name(&ep->dev, "ep-%llu", (unsigned long long) id); + dev_set_name(&ep->dev, "ep-%d", id); err = device_register(&ep->dev); if (err) - goto free_ep; + goto free_id; err = sysfs_create_group(&ep->dev.kobj, &iscsi_endpoint_group); if (err) @@ -248,6 +240,10 @@ unregister_dev: device_unregister(&ep->dev); return NULL; +free_id: + mutex_lock(&iscsi_ep_idr_mutex); + idr_remove(&iscsi_ep_idr, id); + mutex_unlock(&iscsi_ep_idr_mutex); free_ep: kfree(ep); return NULL; @@ -275,14 +271,17 @@ EXPORT_SYMBOL_GPL(iscsi_put_endpoint); */ struct iscsi_endpoint *iscsi_lookup_endpoint(u64 handle) { - struct device *dev; + struct iscsi_endpoint *ep; - dev = class_find_device(&iscsi_endpoint_class, NULL, &handle, - iscsi_match_epid); - if (!dev) - return NULL; + mutex_lock(&iscsi_ep_idr_mutex); + ep = idr_find(&iscsi_ep_idr, handle); + if (!ep) + goto unlock; - return iscsi_dev_to_endpoint(dev); + get_device(&ep->dev); +unlock: + mutex_unlock(&iscsi_ep_idr_mutex); + return ep; } EXPORT_SYMBOL_GPL(iscsi_lookup_endpoint); diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 38e4a67f5922..fdd486047404 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -295,7 +295,7 @@ extern void iscsi_host_for_each_session(struct Scsi_Host *shost, struct iscsi_endpoint { void *dd_data; /* LLD private data */ struct device dev; - uint64_t id; + int id; struct iscsi_cls_conn *conn; }; From 0aadafb5c34403a7cced1a8d61877048dc059f70 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:08 -0500 Subject: [PATCH 07/13] scsi: iscsi: Fix endpoint reuse regression This patch fixes a bug where when using iSCSI offload we can free an endpoint while userspace still thinks it's active. That then causes the endpoint ID to be reused for a new connection's endpoint while userspace still thinks the ID is for the original connection. Userspace will then end up disconnecting a running connection's endpoint or trying to bind to another connection's endpoint. This bug is a regression added in: Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling") where we added a in kernel ep_disconnect call to fix a bug in: Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space") where we would call stop_conn without having done ep_disconnect. This early ep_disconnect call will then free the endpoint and it's ID while userspace still thinks the ID is valid. Fix the early release of the ID by having the in kernel recovery code keep a reference to the endpoint until userspace has called into the kernel to finish cleaning up the endpoint/connection. It requires the previous commit "scsi: iscsi: Release endpoint ID when its freed" which moved the freeing of the ID until when the endpoint is released. Link: https://lore.kernel.org/r/20220408001314.5014-5-michael.christie@oracle.com Fixes: 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling") Tested-by: Manish Rangankar Reviewed-by: Lee Duncan Reviewed-by: Chris Leech Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 1fc7c6bfbd67..f200da049f3b 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2247,7 +2247,11 @@ static void iscsi_if_disconnect_bound_ep(struct iscsi_cls_conn *conn, mutex_unlock(&conn->ep_mutex); flush_work(&conn->cleanup_work); - + /* + * Userspace is now done with the EP so we can release the ref + * iscsi_cleanup_conn_work_fn took. + */ + iscsi_put_endpoint(ep); mutex_lock(&conn->ep_mutex); } } @@ -2322,6 +2326,12 @@ static void iscsi_cleanup_conn_work_fn(struct work_struct *work) return; } + /* + * Get a ref to the ep, so we don't release its ID until after + * userspace is done referencing it in iscsi_if_disconnect_bound_ep. + */ + if (conn->ep) + get_device(&conn->ep->dev); iscsi_ep_disconnect(conn, false); if (system_state != SYSTEM_RUNNING) { From 7c6e99c18167ed89729bf167ccb4a7e3ab3115ba Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:09 -0500 Subject: [PATCH 08/13] scsi: iscsi: Fix conn cleanup and stop race during iscsid restart If iscsid is doing a stop_conn at the same time the kernel is starting error recovery we can hit a race that allows the cleanup work to run on a valid connection. In the race, iscsi_if_stop_conn sees the cleanup bit set, but it calls flush_work on the clean_work before iscsi_conn_error_event has queued it. The flush then returns before the queueing and so the cleanup_work can run later and disconnect/stop a conn while it's in a connected state. The patch: Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space") added the late stop_conn call bug originally, and the patch: Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling") attempted to fix it but only fixed the normal EH case and left the above race for the iscsid restart case. For the normal EH case we don't hit the race because we only signal userspace to start recovery after we have done the queueing, so the flush will always catch the queued work or see it completed. For iscsid restart cases like boot, we can hit the race because iscsid will call down to the kernel before the kernel has signaled any error, so both code paths can be running at the same time. This adds a lock around the setting of the cleanup bit and queueing so they happen together. Link: https://lore.kernel.org/r/20220408001314.5014-6-michael.christie@oracle.com Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space") Tested-by: Manish Rangankar Reviewed-by: Lee Duncan Reviewed-by: Chris Leech Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 17 +++++++++++++++++ include/scsi/scsi_transport_iscsi.h | 2 ++ 2 files changed, 19 insertions(+) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index f200da049f3b..63a4f0c022fd 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2240,9 +2240,12 @@ static void iscsi_if_disconnect_bound_ep(struct iscsi_cls_conn *conn, bool is_active) { /* Check if this was a conn error and the kernel took ownership */ + spin_lock_irq(&conn->lock); if (!test_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags)) { + spin_unlock_irq(&conn->lock); iscsi_ep_disconnect(conn, is_active); } else { + spin_unlock_irq(&conn->lock); ISCSI_DBG_TRANS_CONN(conn, "flush kernel conn cleanup.\n"); mutex_unlock(&conn->ep_mutex); @@ -2289,9 +2292,12 @@ static int iscsi_if_stop_conn(struct iscsi_transport *transport, /* * Figure out if it was the kernel or userspace initiating this. */ + spin_lock_irq(&conn->lock); if (!test_and_set_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags)) { + spin_unlock_irq(&conn->lock); iscsi_stop_conn(conn, flag); } else { + spin_unlock_irq(&conn->lock); ISCSI_DBG_TRANS_CONN(conn, "flush kernel conn cleanup.\n"); flush_work(&conn->cleanup_work); @@ -2300,7 +2306,9 @@ static int iscsi_if_stop_conn(struct iscsi_transport *transport, * Only clear for recovery to avoid extra cleanup runs during * termination. */ + spin_lock_irq(&conn->lock); clear_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags); + spin_unlock_irq(&conn->lock); } ISCSI_DBG_TRANS_CONN(conn, "iscsi if conn stop done.\n"); return 0; @@ -2321,7 +2329,9 @@ static void iscsi_cleanup_conn_work_fn(struct work_struct *work) */ if (conn->state != ISCSI_CONN_BOUND && conn->state != ISCSI_CONN_UP) { ISCSI_DBG_TRANS_CONN(conn, "Got error while conn is already failed. Ignoring.\n"); + spin_lock_irq(&conn->lock); clear_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags); + spin_unlock_irq(&conn->lock); mutex_unlock(&conn->ep_mutex); return; } @@ -2376,6 +2386,7 @@ iscsi_alloc_conn(struct iscsi_cls_session *session, int dd_size, uint32_t cid) conn->dd_data = &conn[1]; mutex_init(&conn->ep_mutex); + spin_lock_init(&conn->lock); INIT_LIST_HEAD(&conn->conn_list); INIT_WORK(&conn->cleanup_work, iscsi_cleanup_conn_work_fn); conn->transport = transport; @@ -2578,9 +2589,12 @@ void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error) struct iscsi_uevent *ev; struct iscsi_internal *priv; int len = nlmsg_total_size(sizeof(*ev)); + unsigned long flags; + spin_lock_irqsave(&conn->lock, flags); if (!test_and_set_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags)) queue_work(iscsi_conn_cleanup_workq, &conn->cleanup_work); + spin_unlock_irqrestore(&conn->lock, flags); priv = iscsi_if_transport_lookup(conn->transport); if (!priv) @@ -3723,11 +3737,14 @@ static int iscsi_if_transport_conn(struct iscsi_transport *transport, return -EINVAL; mutex_lock(&conn->ep_mutex); + spin_lock_irq(&conn->lock); if (test_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags)) { + spin_unlock_irq(&conn->lock); mutex_unlock(&conn->ep_mutex); ev->r.retcode = -ENOTCONN; return 0; } + spin_unlock_irq(&conn->lock); switch (nlh->nlmsg_type) { case ISCSI_UEVENT_BIND_CONN: diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index fdd486047404..9acb8422f680 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -211,6 +211,8 @@ struct iscsi_cls_conn { struct mutex ep_mutex; struct iscsi_endpoint *ep; + /* Used when accessing flags and queueing work. */ + spinlock_t lock; unsigned long flags; struct work_struct cleanup_work; From 03690d81974535f228e892a14f0d2d44404fe555 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:10 -0500 Subject: [PATCH 09/13] scsi: iscsi: Fix unbound endpoint error handling If a driver raises a connection error before the connection is bound, we can leave a cleanup_work queued that can later run and disconnect/stop a connection that is logged in. The problem is that drivers can call iscsi_conn_error_event for endpoints that are connected but not yet bound when something like the network port they are using is brought down. iscsi_cleanup_conn_work_fn will check for this and exit early, but if the cleanup_work is stuck behind other works, it might not get run until after userspace has done ep_disconnect. Because the endpoint is not yet bound there was no way for ep_disconnect to flush the work. The bug of leaving stop_conns queued was added in: Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling") and: Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space") was supposed to fix it, but left this case. This patch moves the conn state check to before we even queue the work so we can avoid queueing. Link: https://lore.kernel.org/r/20220408001314.5014-7-michael.christie@oracle.com Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space") Tested-by: Manish Rangankar Reviewed-by: Lee Duncan Reviewed-by: Chris Leech Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 65 ++++++++++++++++------------- 1 file changed, 36 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 63a4f0c022fd..2c0dd64159b0 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2201,10 +2201,10 @@ static void iscsi_stop_conn(struct iscsi_cls_conn *conn, int flag) switch (flag) { case STOP_CONN_RECOVER: - conn->state = ISCSI_CONN_FAILED; + WRITE_ONCE(conn->state, ISCSI_CONN_FAILED); break; case STOP_CONN_TERM: - conn->state = ISCSI_CONN_DOWN; + WRITE_ONCE(conn->state, ISCSI_CONN_DOWN); break; default: iscsi_cls_conn_printk(KERN_ERR, conn, "invalid stop flag %d\n", @@ -2222,7 +2222,7 @@ static void iscsi_ep_disconnect(struct iscsi_cls_conn *conn, bool is_active) struct iscsi_endpoint *ep; ISCSI_DBG_TRANS_CONN(conn, "disconnect ep.\n"); - conn->state = ISCSI_CONN_FAILED; + WRITE_ONCE(conn->state, ISCSI_CONN_FAILED); if (!conn->ep || !session->transport->ep_disconnect) return; @@ -2321,21 +2321,6 @@ static void iscsi_cleanup_conn_work_fn(struct work_struct *work) struct iscsi_cls_session *session = iscsi_conn_to_session(conn); mutex_lock(&conn->ep_mutex); - /* - * If we are not at least bound there is nothing for us to do. Userspace - * will do a ep_disconnect call if offload is used, but will not be - * doing a stop since there is nothing to clean up, so we have to clear - * the cleanup bit here. - */ - if (conn->state != ISCSI_CONN_BOUND && conn->state != ISCSI_CONN_UP) { - ISCSI_DBG_TRANS_CONN(conn, "Got error while conn is already failed. Ignoring.\n"); - spin_lock_irq(&conn->lock); - clear_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags); - spin_unlock_irq(&conn->lock); - mutex_unlock(&conn->ep_mutex); - return; - } - /* * Get a ref to the ep, so we don't release its ID until after * userspace is done referencing it in iscsi_if_disconnect_bound_ep. @@ -2391,7 +2376,7 @@ iscsi_alloc_conn(struct iscsi_cls_session *session, int dd_size, uint32_t cid) INIT_WORK(&conn->cleanup_work, iscsi_cleanup_conn_work_fn); conn->transport = transport; conn->cid = cid; - conn->state = ISCSI_CONN_DOWN; + WRITE_ONCE(conn->state, ISCSI_CONN_DOWN); /* this is released in the dev's release function */ if (!get_device(&session->dev)) @@ -2590,10 +2575,30 @@ void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error) struct iscsi_internal *priv; int len = nlmsg_total_size(sizeof(*ev)); unsigned long flags; + int state; spin_lock_irqsave(&conn->lock, flags); - if (!test_and_set_bit(ISCSI_CLS_CONN_BIT_CLEANUP, &conn->flags)) - queue_work(iscsi_conn_cleanup_workq, &conn->cleanup_work); + /* + * Userspace will only do a stop call if we are at least bound. And, we + * only need to do the in kernel cleanup if in the UP state so cmds can + * be released to upper layers. If in other states just wait for + * userspace to avoid races that can leave the cleanup_work queued. + */ + state = READ_ONCE(conn->state); + switch (state) { + case ISCSI_CONN_BOUND: + case ISCSI_CONN_UP: + if (!test_and_set_bit(ISCSI_CLS_CONN_BIT_CLEANUP, + &conn->flags)) { + queue_work(iscsi_conn_cleanup_workq, + &conn->cleanup_work); + } + break; + default: + ISCSI_DBG_TRANS_CONN(conn, "Got conn error in state %d\n", + state); + break; + } spin_unlock_irqrestore(&conn->lock, flags); priv = iscsi_if_transport_lookup(conn->transport); @@ -2944,7 +2949,7 @@ iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev) char *data = (char*)ev + sizeof(*ev); struct iscsi_cls_conn *conn; struct iscsi_cls_session *session; - int err = 0, value = 0; + int err = 0, value = 0, state; if (ev->u.set_param.len > PAGE_SIZE) return -EINVAL; @@ -2961,8 +2966,8 @@ iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev) session->recovery_tmo = value; break; default: - if ((conn->state == ISCSI_CONN_BOUND) || - (conn->state == ISCSI_CONN_UP)) { + state = READ_ONCE(conn->state); + if (state == ISCSI_CONN_BOUND || state == ISCSI_CONN_UP) { err = transport->set_param(conn, ev->u.set_param.param, data, ev->u.set_param.len); } else { @@ -3758,7 +3763,7 @@ static int iscsi_if_transport_conn(struct iscsi_transport *transport, ev->u.b_conn.transport_eph, ev->u.b_conn.is_leading); if (!ev->r.retcode) - conn->state = ISCSI_CONN_BOUND; + WRITE_ONCE(conn->state, ISCSI_CONN_BOUND); if (ev->r.retcode || !transport->ep_connect) break; @@ -3777,7 +3782,8 @@ static int iscsi_if_transport_conn(struct iscsi_transport *transport, case ISCSI_UEVENT_START_CONN: ev->r.retcode = transport->start_conn(conn); if (!ev->r.retcode) - conn->state = ISCSI_CONN_UP; + WRITE_ONCE(conn->state, ISCSI_CONN_UP); + break; case ISCSI_UEVENT_SEND_PDU: pdu_len = nlh->nlmsg_len - sizeof(*nlh) - sizeof(*ev); @@ -4084,10 +4090,11 @@ static ssize_t show_conn_state(struct device *dev, { struct iscsi_cls_conn *conn = iscsi_dev_to_conn(dev->parent); const char *state = "unknown"; + int conn_state = READ_ONCE(conn->state); - if (conn->state >= 0 && - conn->state < ARRAY_SIZE(connection_state_names)) - state = connection_state_names[conn->state]; + if (conn_state >= 0 && + conn_state < ARRAY_SIZE(connection_state_names)) + state = connection_state_names[conn_state]; return sysfs_emit(buf, "%s\n", state); } From 5bd856256f8c03e329f8ff36d8c8efcb111fe6df Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:11 -0500 Subject: [PATCH 10/13] scsi: iscsi: Merge suspend fields Move the tx and rx suspend fields into one flags field. Link: https://lore.kernel.org/r/20220408001314.5014-8-michael.christie@oracle.com Tested-by: Manish Rangankar Reviewed-by: Lee Duncan Reviewed-by: Chris Leech Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +- drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +- drivers/scsi/cxgbi/libcxgbi.c | 6 +++--- drivers/scsi/libiscsi.c | 20 ++++++++++---------- drivers/scsi/libiscsi_tcp.c | 2 +- include/scsi/libiscsi.h | 9 +++++---- 6 files changed, 21 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 7fe7f53a41c0..6c864b093ac9 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1977,7 +1977,7 @@ static int bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn) if (nopin->cq_req_sn != qp->cqe_exp_seq_sn) break; - if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx))) { + if (unlikely(test_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags))) { if (nopin->op_code == ISCSI_OP_NOOP_IN && nopin->itt == (u16) RESERVED_ITT) { printk(KERN_ALERT "bnx2i: Unsolicited " diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index fe86fd61a995..15fbd09baa94 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -1721,7 +1721,7 @@ static int bnx2i_tear_down_conn(struct bnx2i_hba *hba, struct iscsi_conn *conn = ep->conn->cls_conn->dd_data; /* Must suspend all rx queue activity for this ep */ - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); + set_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags); } /* CONN_DISCONNECT timeout may or may not be an issue depending * on what transcribed in TCP layer, different targets behave diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index 8c7d4dda4cf2..4365d52c6430 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -1634,11 +1634,11 @@ void cxgbi_conn_pdu_ready(struct cxgbi_sock *csk) log_debug(1 << CXGBI_DBG_PDU_RX, "csk 0x%p, conn 0x%p.\n", csk, conn); - if (unlikely(!conn || conn->suspend_rx)) { + if (unlikely(!conn || test_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags))) { log_debug(1 << CXGBI_DBG_PDU_RX, - "csk 0x%p, conn 0x%p, id %d, suspend_rx %lu!\n", + "csk 0x%p, conn 0x%p, id %d, conn flags 0x%lx!\n", csk, conn, conn ? conn->id : 0xFF, - conn ? conn->suspend_rx : 0xFF); + conn ? conn->flags : 0xFF); return; } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index cf4211c6500d..fbf029147f5f 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1392,8 +1392,8 @@ static bool iscsi_set_conn_failed(struct iscsi_conn *conn) if (conn->stop_stage == 0) session->state = ISCSI_STATE_FAILED; - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); + set_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags); + set_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags); return true; } @@ -1454,7 +1454,7 @@ static int iscsi_xmit_task(struct iscsi_conn *conn, struct iscsi_task *task, * Do this after dropping the extra ref because if this was a requeue * it's removed from that list and cleanup_queued_task would miss it. */ - if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx)) { + if (test_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags)) { /* * Save the task and ref in case we weren't cleaning up this * task and get woken up again. @@ -1532,7 +1532,7 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) int rc = 0; spin_lock_bh(&conn->session->frwd_lock); - if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx)) { + if (test_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags)) { ISCSI_DBG_SESSION(conn->session, "Tx suspended!\n"); spin_unlock_bh(&conn->session->frwd_lock); return -ENODATA; @@ -1746,7 +1746,7 @@ int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc) goto fault; } - if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx)) { + if (test_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags)) { reason = FAILURE_SESSION_IN_RECOVERY; sc->result = DID_REQUEUE << 16; goto fault; @@ -1935,7 +1935,7 @@ static void fail_scsi_tasks(struct iscsi_conn *conn, u64 lun, int error) void iscsi_suspend_queue(struct iscsi_conn *conn) { spin_lock_bh(&conn->session->frwd_lock); - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); + set_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags); spin_unlock_bh(&conn->session->frwd_lock); } EXPORT_SYMBOL_GPL(iscsi_suspend_queue); @@ -1953,7 +1953,7 @@ void iscsi_suspend_tx(struct iscsi_conn *conn) struct Scsi_Host *shost = conn->session->host; struct iscsi_host *ihost = shost_priv(shost); - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); + set_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags); if (ihost->workq) flush_workqueue(ihost->workq); } @@ -1961,7 +1961,7 @@ EXPORT_SYMBOL_GPL(iscsi_suspend_tx); static void iscsi_start_tx(struct iscsi_conn *conn) { - clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); + clear_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags); iscsi_conn_queue_work(conn); } @@ -3329,8 +3329,8 @@ int iscsi_conn_bind(struct iscsi_cls_session *cls_session, /* * Unblock xmitworker(), Login Phase will pass through. */ - clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); - clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); + clear_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags); + clear_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags); return 0; } EXPORT_SYMBOL_GPL(iscsi_conn_bind); diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 2e9ffe3d1a55..883005757ddb 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -927,7 +927,7 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb, */ conn->last_recv = jiffies; - if (unlikely(conn->suspend_rx)) { + if (unlikely(test_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags))) { ISCSI_DBG_TCP(conn, "Rx suspended!\n"); *status = ISCSI_TCP_SUSPENDED; return 0; diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index e76c94697c1b..84086c240228 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -53,8 +53,10 @@ enum { #define ISID_SIZE 6 -/* Connection suspend "bit" */ -#define ISCSI_SUSPEND_BIT 1 +/* Connection flags */ +#define ISCSI_CONN_FLAG_SUSPEND_TX BIT(0) +#define ISCSI_CONN_FLAG_SUSPEND_RX BIT(1) + #define ISCSI_ITT_MASK 0x1fff #define ISCSI_TOTAL_CMDS_MAX 4096 @@ -211,8 +213,7 @@ struct iscsi_conn { struct list_head cmdqueue; /* data-path cmd queue */ struct list_head requeue; /* tasks needing another run */ struct work_struct xmitwork; /* per-conn. xmit workqueue */ - unsigned long suspend_tx; /* suspend Tx */ - unsigned long suspend_rx; /* suspend Rx */ + unsigned long flags; /* ISCSI_CONN_FLAGs */ /* negotiated params */ unsigned max_recv_dlength; /* initiator_max_recv_dsl*/ From 44ac97109e42f87b1a34954704b81b6c8eca80c4 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:12 -0500 Subject: [PATCH 11/13] scsi: iscsi: Fix NOP handling during conn recovery If a offload driver doesn't use the xmit workqueue, then when we are doing ep_disconnect libiscsi can still inject PDUs to the driver. This adds a check for if the connection is bound before trying to inject PDUs. Link: https://lore.kernel.org/r/20220408001314.5014-9-michael.christie@oracle.com Tested-by: Manish Rangankar Reviewed-by: Lee Duncan Reviewed-by: Chris Leech Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/libiscsi.c | 7 ++++++- include/scsi/libiscsi.h | 2 +- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index fbf029147f5f..797abf4f5399 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -678,7 +678,8 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, struct iscsi_task *task; itt_t itt; - if (session->state == ISCSI_STATE_TERMINATE) + if (session->state == ISCSI_STATE_TERMINATE || + !test_bit(ISCSI_CONN_FLAG_BOUND, &conn->flags)) return NULL; if (opcode == ISCSI_OP_LOGIN || opcode == ISCSI_OP_TEXT) { @@ -2214,6 +2215,8 @@ void iscsi_conn_unbind(struct iscsi_cls_conn *cls_conn, bool is_active) iscsi_suspend_tx(conn); spin_lock_bh(&session->frwd_lock); + clear_bit(ISCSI_CONN_FLAG_BOUND, &conn->flags); + if (!is_active) { /* * if logout timed out before userspace could even send a PDU @@ -3317,6 +3320,8 @@ int iscsi_conn_bind(struct iscsi_cls_session *cls_session, spin_lock_bh(&session->frwd_lock); if (is_leading) session->leadconn = conn; + + set_bit(ISCSI_CONN_FLAG_BOUND, &conn->flags); spin_unlock_bh(&session->frwd_lock); /* diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 84086c240228..d0a24779c52d 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -56,7 +56,7 @@ enum { /* Connection flags */ #define ISCSI_CONN_FLAG_SUSPEND_TX BIT(0) #define ISCSI_CONN_FLAG_SUSPEND_RX BIT(1) - +#define ISCSI_CONN_FLAG_BOUND BIT(2) #define ISCSI_ITT_MASK 0x1fff #define ISCSI_TOTAL_CMDS_MAX 4096 From 857b06527f707f5df634b854898a191b5c1d0272 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:13 -0500 Subject: [PATCH 12/13] scsi: qedi: Fix failed disconnect handling We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is created. Then in qedi_set_path we kick off the offload work. If userspace times out the connection and calls ep_disconnect, qedi will only flush the offload work if the qedi_ep state has transitioned away from EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned state and will leave the offload work running, and we will free the qedi_ep from under it. This patch just has us init the work when we create the ep, then always flush it. Link: https://lore.kernel.org/r/20220408001314.5014-10-michael.christie@oracle.com Tested-by: Manish Rangankar Reviewed-by: Lee Duncan Reviewed-by: Chris Leech Acked-by: Manish Rangankar Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_iscsi.c | 69 +++++++++++++++++----------------- 1 file changed, 34 insertions(+), 35 deletions(-) diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c index 8196f89f404e..31ec429104e2 100644 --- a/drivers/scsi/qedi/qedi_iscsi.c +++ b/drivers/scsi/qedi/qedi_iscsi.c @@ -860,6 +860,37 @@ static int qedi_task_xmit(struct iscsi_task *task) return qedi_iscsi_send_ioreq(task); } +static void qedi_offload_work(struct work_struct *work) +{ + struct qedi_endpoint *qedi_ep = + container_of(work, struct qedi_endpoint, offload_work); + struct qedi_ctx *qedi; + int wait_delay = 5 * HZ; + int ret; + + qedi = qedi_ep->qedi; + + ret = qedi_iscsi_offload_conn(qedi_ep); + if (ret) { + QEDI_ERR(&qedi->dbg_ctx, + "offload error: iscsi_cid=%u, qedi_ep=%p, ret=%d\n", + qedi_ep->iscsi_cid, qedi_ep, ret); + qedi_ep->state = EP_STATE_OFLDCONN_FAILED; + return; + } + + ret = wait_event_interruptible_timeout(qedi_ep->tcp_ofld_wait, + (qedi_ep->state == + EP_STATE_OFLDCONN_COMPL), + wait_delay); + if (ret <= 0 || qedi_ep->state != EP_STATE_OFLDCONN_COMPL) { + qedi_ep->state = EP_STATE_OFLDCONN_FAILED; + QEDI_ERR(&qedi->dbg_ctx, + "Offload conn TIMEOUT iscsi_cid=%u, qedi_ep=%p\n", + qedi_ep->iscsi_cid, qedi_ep); + } +} + static struct iscsi_endpoint * qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr, int non_blocking) @@ -908,6 +939,7 @@ qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr, } qedi_ep = ep->dd_data; memset(qedi_ep, 0, sizeof(struct qedi_endpoint)); + INIT_WORK(&qedi_ep->offload_work, qedi_offload_work); qedi_ep->state = EP_STATE_IDLE; qedi_ep->iscsi_cid = (u32)-1; qedi_ep->qedi = qedi; @@ -1056,12 +1088,11 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep) qedi_ep = ep->dd_data; qedi = qedi_ep->qedi; + flush_work(&qedi_ep->offload_work); + if (qedi_ep->state == EP_STATE_OFLDCONN_START) goto ep_exit_recover; - if (qedi_ep->state != EP_STATE_OFLDCONN_NONE) - flush_work(&qedi_ep->offload_work); - if (qedi_ep->conn) { qedi_conn = qedi_ep->conn; abrt_conn = qedi_conn->abrt_conn; @@ -1235,37 +1266,6 @@ static int qedi_data_avail(struct qedi_ctx *qedi, u16 vlanid) return rc; } -static void qedi_offload_work(struct work_struct *work) -{ - struct qedi_endpoint *qedi_ep = - container_of(work, struct qedi_endpoint, offload_work); - struct qedi_ctx *qedi; - int wait_delay = 5 * HZ; - int ret; - - qedi = qedi_ep->qedi; - - ret = qedi_iscsi_offload_conn(qedi_ep); - if (ret) { - QEDI_ERR(&qedi->dbg_ctx, - "offload error: iscsi_cid=%u, qedi_ep=%p, ret=%d\n", - qedi_ep->iscsi_cid, qedi_ep, ret); - qedi_ep->state = EP_STATE_OFLDCONN_FAILED; - return; - } - - ret = wait_event_interruptible_timeout(qedi_ep->tcp_ofld_wait, - (qedi_ep->state == - EP_STATE_OFLDCONN_COMPL), - wait_delay); - if ((ret <= 0) || (qedi_ep->state != EP_STATE_OFLDCONN_COMPL)) { - qedi_ep->state = EP_STATE_OFLDCONN_FAILED; - QEDI_ERR(&qedi->dbg_ctx, - "Offload conn TIMEOUT iscsi_cid=%u, qedi_ep=%p\n", - qedi_ep->iscsi_cid, qedi_ep); - } -} - static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data) { struct qedi_ctx *qedi; @@ -1381,7 +1381,6 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data) qedi_ep->dst_addr, qedi_ep->dst_port); } - INIT_WORK(&qedi_ep->offload_work, qedi_offload_work); queue_work(qedi->offload_thread, &qedi_ep->offload_work); ret = 0; From 70a3baeec4e89736be932a60d682d7ae27556f5c Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 7 Apr 2022 19:13:14 -0500 Subject: [PATCH 13/13] scsi: iscsi: MAINTAINERS: Add Mike Christie as co-maintainer I've been doing a lot of iscsi patches because Oracle is paying me to work on iSCSI again. It was supposed to be temp assignment, but my co-worker that was working on iscsi moved to a new group so it looks like I'm back on this code again. After talking to Chris and Lee this patch adds me back as co-maintainer, so I can help them and people remember to cc me on issues. Link: https://lore.kernel.org/r/20220408001314.5014-11-michael.christie@oracle.com Tested-by: Manish Rangankar Acked-by: Lee Duncan Acked-by: Chris Leech Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index fd768d43e048..ca9d56121974 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10369,6 +10369,7 @@ F: include/linux/isapnp.h ISCSI M: Lee Duncan M: Chris Leech +M: Mike Christie L: open-iscsi@googlegroups.com L: linux-scsi@vger.kernel.org S: Maintained