Merge branch 'sh/alphaproject' into sh-latest

2024-11-11 06:31:49 +00:00 · 2011-01-13 18:38:28 +09:00 · 2011-01-13 18:38:28 +09:00 · 8b6f08eaef
commit 8b6f08eaef
parent 4ae26f46c9 8a453cac94
54 changed files with 6694 additions and 1000 deletions
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@ -457,6 +457,9 @@ ChangeLog

 Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.

+2.1.30:
+	- Fix writev() (it kept writing the first segment over and over again
+	  instead of moving onto subsequent segments).
 2.1.29:
 	- Fix a deadlock when mounting read-write.
 2.1.28:
--- a/6
+++ b/6
@ -4383,11 +4383,11 @@ F:	Documentation/scsi/NinjaSCSI.txt
 F:	drivers/scsi/nsp32*

 NTFS FILESYSTEM
-M:	Anton Altaparmakov <aia21@cantab.net>
+M:	Anton Altaparmakov <anton@tuxera.com>
 L:	linux-ntfs-dev@lists.sourceforge.net
-W:	http://www.linux-ntfs.org/
+W:	http://www.tuxera.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
-S:	Maintained
+S:	Supported
 F:	Documentation/filesystems/ntfs.txt
 F:	fs/ntfs/

--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@ -3,6 +3,9 @@ menu "Board support"
 config SOLUTION_ENGINE
 	bool

+config SH_ALPHA_BOARD
+	bool
+
 config SH_SOLUTION_ENGINE
 	bool "SolutionEngine"
 	select SOLUTION_ENGINE
@ -320,6 +323,21 @@ config SH_SH2007
 	  Compact Flash socket, two serial ports and PC-104 bus.
 	  More information at <http://sh2000.sh-linux.org>.

+config SH_APSH4A3A
+	bool "AP-SH4A-3A"
+	select SH_ALPHA_BOARD
+	depends on CPU_SUBTYPE_SH7785
+	help
+	  Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
+
+config SH_APSH4AD0A
+	bool "AP-SH4AD-0A"
+	select SH_ALPHA_BOARD
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7786
+	help
+	  Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
+
 endmenu

 source "arch/sh/boards/mach-r2d/Kconfig"
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@ -13,3 +13,5 @@ obj-$(CONFIG_SH_ESPT)		+= board-espt.o
 obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o
 obj-$(CONFIG_SH_TITAN)		+= board-titan.o
 obj-$(CONFIG_SH_SH7757LCR)	+= board-sh7757lcr.o
+obj-$(CONFIG_SH_APSH4A3A)	+= board-apsh4a3a.o
+obj-$(CONFIG_SH_APSH4AD0A)	+= board-apsh4ad0a.o
--- a/arch/sh/boards/board-apsh4a3a.c
+++ b/arch/sh/boards/board-apsh4a3a.c
@ -0,0 +1,175 @@
+/*
+ * ALPHAPROJECT AP-SH4A-3A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/physmap.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/clock.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0xA4000000,
+		.end		= 0xA4000000 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x200),
+		.end		= evt2irq(0x200),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *apsh4a3a_devices[] __initdata = {
+	&nor_flash_device,
+	&smsc911x_device,
+};
+
+static int __init apsh4a3a_devices_setup(void)
+{
+	return platform_add_devices(apsh4a3a_devices,
+				    ARRAY_SIZE(apsh4a3a_devices));
+}
+device_initcall(apsh4a3a_devices_setup);
+
+static int apsh4a3a_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (!clk || IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333000);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4a3a_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
+}
+
+static void __init apsh4a3a_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+}
+
+/* Return the board specific boot mode pin configuration */
+static int apsh4a3a_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of SW1 and SW2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value &= ~MODE_PIN0;  /* Clock Mode 16 */
+	value &= ~MODE_PIN1;
+	value &= ~MODE_PIN2;
+	value &= ~MODE_PIN3;
+	value |=  MODE_PIN4;
+	value &= ~MODE_PIN5;  /* 16-bit Area0 bus width */
+	value |=  MODE_PIN6;  /* Area 0 SRAM interface */
+	value |=  MODE_PIN7;
+	value |=  MODE_PIN8;  /* Little Endian */
+	value |=  MODE_PIN9;  /* Master Mode */
+	value |=  MODE_PIN10; /* Crystal resonator */
+	value |=  MODE_PIN11; /* Display Unit */
+	value |=  MODE_PIN12;
+	value &= ~MODE_PIN13; /* 29-bit address mode */
+	value |=  MODE_PIN14; /* No PLL step-up */
+
+	return value;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4a3a __initmv = {
+	.mv_name		= "AP-SH4A-3A",
+	.mv_setup		= apsh4a3a_setup,
+	.mv_clk_init		= apsh4a3a_clk_init,
+	.mv_init_irq		= apsh4a3a_init_irq,
+	.mv_mode_pins		= apsh4a3a_mode_pins,
+};
--- a/arch/sh/boards/board-apsh4ad0a.c
+++ b/arch/sh/boards/board-apsh4ad0a.c
@ -0,0 +1,125 @@
+/*
+ * ALPHAPROJECT AP-SH4AD-0A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0xA4000000,
+		.end		= 0xA4000000 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x200),
+		.end		= evt2irq(0x200),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *apsh4ad0a_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init apsh4ad0a_devices_setup(void)
+{
+	return platform_add_devices(apsh4ad0a_devices,
+				    ARRAY_SIZE(apsh4ad0a_devices));
+}
+device_initcall(apsh4ad0a_devices_setup);
+
+static int apsh4ad0a_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of SW1 and SW2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |=  MODE_PIN0;  /* Clock Mode 3 */
+	value |=  MODE_PIN1;
+	value &= ~MODE_PIN2;
+	value &= ~MODE_PIN3;
+	value &= ~MODE_PIN4;  /* 16-bit Area0 bus width  */
+	value |=  MODE_PIN5;
+	value |=  MODE_PIN6;
+	value |=  MODE_PIN7;  /* Normal mode */
+	value |=  MODE_PIN8;  /* Little Endian */
+	value |=  MODE_PIN9;  /* Crystal resonator */
+	value &= ~MODE_PIN10; /* 29-bit address mode */
+	value &= ~MODE_PIN11; /* PCI-E Root port */
+	value &= ~MODE_PIN12; /* 4 lane + 1 lane */
+	value |=  MODE_PIN13; /* AUD Enable */
+	value &= ~MODE_PIN14; /* Normal Operation */
+
+	return value;
+}
+
+static int apsh4ad0a_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (!clk || IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333000);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4ad0a_setup(char **cmdline_p)
+{
+	pr_info("Alpha Project AP-SH4AD-0A support:\n");
+}
+
+static void __init apsh4ad0a_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4ad0a __initmv = {
+	.mv_name		= "AP-SH4AD-0A",
+	.mv_setup		= apsh4ad0a_setup,
+	.mv_mode_pins		= apsh4ad0a_mode_pins,
+	.mv_clk_init		= apsh4ad0a_clk_init,
+	.mv_init_irq		= apsh4ad0a_init_irq,
+};
--- a/arch/sh/configs/apsh4a3a_defconfig
+++ b/arch/sh/configs/apsh4a3a_defconfig
@ -0,0 +1,102 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_APSH4A3A=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_KEXEC=y
+CONFIG_PREEMPT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_SH7785FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
--- a/arch/sh/configs/apsh4ad0a_defconfig
+++ b/arch/sh/configs/apsh4ad0a_defconfig
@ -0,0 +1,133 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_RCU_TRACE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_CPU_SUBTYPE_SH7786=y
+CONFIG_MEMORY_SIZE=0x10000000
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_APSH4AD0A=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_SH_CPU_FREQ=y
+CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_PM_RUNTIME=y
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FB_SH7785FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DWARF_UNWINDER=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@ -9,6 +9,7 @@ SE			SH_SOLUTION_ENGINE
 HIGHLANDER		SH_HIGHLANDER
 RTS7751R2D		SH_RTS7751R2D
 RSK			SH_RSK
+ALPHA_BOARD		SH_ALPHA_BOARD

 #
 # List of companion chips / MFDs.
@ -61,3 +62,5 @@ ESPT			SH_ESPT
 POLARIS			SH_POLARIS
 KFR2R09			SH_KFR2R09
 ECOVEC			SH_ECOVEC
+APSH4A3A		SH_APSH4A3A
+APSH4AD0A		SH_APSH4AD0A
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@ -464,6 +464,7 @@ config XEN_BLKDEV_FRONTEND
 	tristate "Xen virtual block device support"
 	depends on XEN
 	default y
+	select XEN_XENBUS_FRONTEND
 	help
 	  This driver implements the front-end of the Xen virtual
 	  block device driver.  It communicates with a back-end driver
--- a/drivers/char/agp/intel-agp.h
+++ b/drivers/char/agp/intel-agp.h
@ -94,6 +94,8 @@
 #define G4x_GMCH_SIZE_VT_1_5M	(0xa << 8)
 #define G4x_GMCH_SIZE_VT_2M	(0xc << 8)

+#define GFX_FLSH_CNTL		0x2170 /* 915+ */
+
 #define I810_DRAM_CTL		0x3000
 #define I810_DRAM_ROW_0		0x00000001
 #define I810_DRAM_ROW_0_SDRAM	0x00000001
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@ -688,14 +688,14 @@ static int intel_gtt_init(void)

 	intel_private.base.stolen_size = intel_gtt_stolen_size();

+	intel_private.base.needs_dmar = USE_PCI_DMA_API && INTEL_GTT_GEN > 2;
+
 	ret = intel_gtt_setup_scratch_page();
 	if (ret != 0) {
 		intel_gtt_cleanup();
 		return ret;
 	}

-	intel_private.base.needs_dmar = USE_PCI_DMA_API && INTEL_GTT_GEN > 2;
-
 	return 0;
 }

@ -814,6 +814,12 @@ static bool intel_enable_gtt(void)
 		}
 	}

+	/* On the resume path we may be adjusting the PGTBL value, so
+	 * be paranoid and flush all chipset write buffers...
+	 */
+	if (INTEL_GTT_GEN >= 3)
+		writel(0, intel_private.registers+GFX_FLSH_CNTL);
+
 	reg = intel_private.registers+I810_PGETBL_CTL;
 	writel(intel_private.PGETBL_save, reg);
 	if (HAS_PGTBL_EN && (readl(reg) & I810_PGETBL_ENABLED) == 0) {
@ -823,6 +829,9 @@ static bool intel_enable_gtt(void)
 		return false;
 	}

+	if (INTEL_GTT_GEN >= 3)
+		writel(0, intel_private.registers+GFX_FLSH_CNTL);
+
 	return true;
 }

@ -991,14 +1000,14 @@ static int intel_fake_agp_remove_entries(struct agp_memory *mem,
 	if (mem->page_count == 0)
 		return 0;

+	intel_gtt_clear_range(pg_start, mem->page_count);
+
 	if (intel_private.base.needs_dmar) {
 		intel_gtt_unmap_memory(mem->sg_list, mem->num_sg);
 		mem->sg_list = NULL;
 		mem->num_sg = 0;
 	}

-	intel_gtt_clear_range(pg_start, mem->page_count);
-
 	return 0;
 }

--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@ -106,10 +106,19 @@ static const char *get_tiling_flag(struct drm_i915_gem_object *obj)
    }
 }

+static const char *agp_type_str(int type)
+{
+	switch (type) {
+	case 0: return " uncached";
+	case 1: return " snooped";
+	default: return "";
+	}
+}
+
 static void
 describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 {
-	seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s",
+	seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s%s",
 		   &obj->base,
 		   get_pin_flag(obj),
 		   get_tiling_flag(obj),
@ -118,6 +127,7 @@ describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 		   obj->base.write_domain,
 		   obj->last_rendering_seqno,
 		   obj->last_fenced_seqno,
+		   agp_type_str(obj->agp_type == AGP_USER_CACHED_MEMORY),
 		   obj->dirty ? " dirty" : "",
 		   obj->madv == I915_MADV_DONTNEED ? " purgeable" : "");
 	if (obj->base.name)
@ -276,6 +286,37 @@ static int i915_gem_object_info(struct seq_file *m, void* data)
 	return 0;
 }

+static int i915_gem_gtt_info(struct seq_file *m, void* data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	size_t total_obj_size, total_gtt_size;
+	int count, ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	total_obj_size = total_gtt_size = count = 0;
+	list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
+		seq_printf(m, "   ");
+		describe_obj(m, obj);
+		seq_printf(m, "\n");
+		total_obj_size += obj->base.size;
+		total_gtt_size += obj->gtt_space->size;
+		count++;
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	seq_printf(m, "Total %d objects, %zu bytes, %zu GTT size\n",
+		   count, total_obj_size, total_gtt_size);
+
+	return 0;
+}
+

 static int i915_gem_pageflip_info(struct seq_file *m, void *data)
 {
@ -456,8 +497,14 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
 	}
 	seq_printf(m, "Interrupts received: %d\n",
 		   atomic_read(&dev_priv->irq_received));
-	for (i = 0; i < I915_NUM_RINGS; i++)
+	for (i = 0; i < I915_NUM_RINGS; i++) {
+		if (IS_GEN6(dev)) {
+			seq_printf(m, "Graphics Interrupt mask (%s):	%08x\n",
+				   dev_priv->ring[i].name,
+				   I915_READ_IMR(&dev_priv->ring[i]));
+		}
 		i915_ring_seqno_info(m, &dev_priv->ring[i]);
+	}
 	mutex_unlock(&dev->struct_mutex);

 	return 0;
@ -656,7 +703,7 @@ static void print_error_buffers(struct seq_file *m,
 	seq_printf(m, "%s [%d]:\n", name, count);

 	while (count--) {
-		seq_printf(m, "  %08x %8zd %04x %04x %08x%s%s%s%s%s",
+		seq_printf(m, "  %08x %8zd %04x %04x %08x%s%s%s%s%s%s",
 			   err->gtt_offset,
 			   err->size,
 			   err->read_domains,
@ -666,7 +713,8 @@ static void print_error_buffers(struct seq_file *m,
 			   tiling_flag(err->tiling),
 			   dirty_flag(err->dirty),
 			   purgeable_flag(err->purgeable),
-			   ring_str(err->ring));
+			   ring_str(err->ring),
+			   agp_type_str(err->agp_type));

 		if (err->name)
 			seq_printf(m, " (name: %d)", err->name);
@ -744,7 +792,9 @@ static int i915_error_state(struct seq_file *m, void *unused)
 		if (error->batchbuffer[i]) {
 			struct drm_i915_error_object *obj = error->batchbuffer[i];

-			seq_printf(m, "--- gtt_offset = 0x%08x\n", obj->gtt_offset);
+			seq_printf(m, "%s --- gtt_offset = 0x%08x\n",
+				   dev_priv->ring[i].name,
+				   obj->gtt_offset);
 			offset = 0;
 			for (page = 0; page < obj->page_count; page++) {
 				for (elt = 0; elt < PAGE_SIZE/4; elt++) {
@ -890,7 +940,7 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 rgvmodectl = I915_READ(MEMMODECTL);
-	u32 rstdbyctl = I915_READ(MCHBAR_RENDER_STANDBY);
+	u32 rstdbyctl = I915_READ(RSTDBYCTL);
 	u16 crstandvid = I915_READ16(CRSTANDVID);

 	seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
@ -913,6 +963,30 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
 	seq_printf(m, "RS2 VID: %d\n", ((crstandvid >> 8) & 0x3f));
 	seq_printf(m, "Render standby enabled: %s\n",
 		   (rstdbyctl & RCX_SW_EXIT) ? "no" : "yes");
+	seq_printf(m, "Current RS state: ");
+	switch (rstdbyctl & RSX_STATUS_MASK) {
+	case RSX_STATUS_ON:
+		seq_printf(m, "on\n");
+		break;
+	case RSX_STATUS_RC1:
+		seq_printf(m, "RC1\n");
+		break;
+	case RSX_STATUS_RC1E:
+		seq_printf(m, "RC1E\n");
+		break;
+	case RSX_STATUS_RS1:
+		seq_printf(m, "RS1\n");
+		break;
+	case RSX_STATUS_RS2:
+		seq_printf(m, "RS2 (RC6)\n");
+		break;
+	case RSX_STATUS_RS3:
+		seq_printf(m, "RC3 (RC6+)\n");
+		break;
+	default:
+		seq_printf(m, "unknown\n");
+		break;
+	}

 	return 0;
 }
@ -1187,6 +1261,7 @@ static int i915_wedged_create(struct dentry *root, struct drm_minor *minor)
 static struct drm_info_list i915_debugfs_list[] = {
 	{"i915_capabilities", i915_capabilities, 0, 0},
 	{"i915_gem_objects", i915_gem_object_info, 0},
+	{"i915_gem_gtt", i915_gem_gtt_info, 0},
 	{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
 	{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
 	{"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST},
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@ -1962,13 +1962,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	/* enable GEM by default */
 	dev_priv->has_gem = 1;

-	if (dev_priv->has_gem == 0 &&
-	    drm_core_check_feature(dev, DRIVER_MODESET)) {
-		DRM_ERROR("kernel modesetting requires GEM, disabling driver.\n");
-		ret = -ENODEV;
-		goto out_workqueue_free;
-	}
-
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
 	if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev)) {
@ -2055,7 +2048,6 @@ out_gem_unload:

 	intel_teardown_gmbus(dev);
 	intel_teardown_mchbar(dev);
-out_workqueue_free:
 	destroy_workqueue(dev_priv->wq);
 out_iomapfree:
 	io_mapping_free(dev_priv->mm.gtt_mapping);
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@ -49,6 +49,9 @@ module_param_named(powersave, i915_powersave, int, 0600);
 unsigned int i915_lvds_downclock = 0;
 module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);

+bool i915_try_reset = true;
+module_param_named(reset, i915_try_reset, bool, 0600);
+
 static struct drm_driver driver;
 extern int intel_agp_enabled;

@ -352,6 +355,9 @@ static int i915_drm_thaw(struct drm_device *dev)

 		/* Resume the modeset for every activated CRTC */
 		drm_helper_resume_force_mode(dev);
+
+		if (dev_priv->renderctx && dev_priv->pwrctx)
+			ironlake_enable_rc6(dev);
 	}

 	intel_opregion_init(dev);
@ -475,6 +481,9 @@ int i915_reset(struct drm_device *dev, u8 flags)
 	bool need_display = true;
 	int ret;

+	if (!i915_try_reset)
+		return 0;
+
 	if (!mutex_trylock(&dev->struct_mutex))
 		return -EBUSY;

--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@ -172,20 +172,21 @@ struct drm_i915_error_state {
 		int page_count;
 		u32 gtt_offset;
 		u32 *pages[0];
-	} *ringbuffer, *batchbuffer[2];
+	} *ringbuffer, *batchbuffer[I915_NUM_RINGS];
 	struct drm_i915_error_buffer {
-		size_t size;
+		u32 size;
 		u32 name;
 		u32 seqno;
 		u32 gtt_offset;
 		u32 read_domains;
 		u32 write_domain;
-		u32 fence_reg;
+		s32 fence_reg:5;
 		s32 pinned:2;
 		u32 tiling:2;
 		u32 dirty:1;
 		u32 purgeable:1;
 		u32 ring:4;
+		u32 agp_type:1;
 	} *active_bo, *pinned_bo;
 	u32 active_bo_count, pinned_bo_count;
 	struct intel_overlay_error_state *overlay;
@ -332,6 +333,7 @@ typedef struct drm_i915_private {

 	/* LVDS info */
 	int backlight_level;  /* restore backlight to this value */
+	bool backlight_enabled;
 	struct drm_display_mode *panel_fixed_mode;
 	struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
 	struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
@ -794,6 +796,7 @@ struct drm_i915_gem_object {
 	 */
 	struct hlist_node exec_node;
 	unsigned long exec_handle;
+	struct drm_i915_gem_exec_object2 *exec_entry;

 	/**
 	 * Current offset of the object in GTT space.
@ -1006,12 +1009,6 @@ extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc);
 extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc);
 extern int i915_vblank_swap(struct drm_device *dev, void *data,
 			    struct drm_file *file_priv);
-extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
-extern void i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask);
-extern void ironlake_enable_graphics_irq(drm_i915_private_t *dev_priv,
-		u32 mask);
-extern void ironlake_disable_graphics_irq(drm_i915_private_t *dev_priv,
-		u32 mask);

 void
 i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
@ -1091,7 +1088,7 @@ int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
 void i915_gem_load(struct drm_device *dev);
 int i915_gem_init_object(struct drm_gem_object *obj);
-void i915_gem_flush_ring(struct drm_device *dev,
+int __must_check i915_gem_flush_ring(struct drm_device *dev,
 				     struct intel_ring_buffer *ring,
 				     uint32_t invalidate_domains,
 				     uint32_t flush_domains);
@ -1265,6 +1262,7 @@ extern void intel_disable_fbc(struct drm_device *dev);
 extern void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval);
 extern bool intel_fbc_enabled(struct drm_device *dev);
 extern bool ironlake_set_drps(struct drm_device *dev, u8 val);
+extern void ironlake_enable_rc6(struct drm_device *dev);
 extern void gen6_set_rps(struct drm_device *dev, u8 val);
 extern void intel_detect_pch (struct drm_device *dev);
 extern int intel_trans_dp_port_sel (struct drm_crtc *crtc);
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@ -35,16 +35,16 @@
 #include <linux/swap.h>
 #include <linux/pci.h>

-static void i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj);
+static __must_check int i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj);
 static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj);
 static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj);
-static int i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj,
+static __must_check int i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj,
 							  bool write);
-static int i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj,
+static __must_check int i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj,
 								  uint64_t offset,
 								  uint64_t size);
 static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_i915_gem_object *obj);
-static int i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
+static __must_check int i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
 						    unsigned alignment,
 						    bool map_and_fenceable);
 static void i915_gem_clear_fence_reg(struct drm_device *dev,
@ -1935,6 +1935,8 @@ i915_gem_retire_work_handler(struct work_struct *work)
 {
 	drm_i915_private_t *dev_priv;
 	struct drm_device *dev;
+	bool idle;
+	int i;

 	dev_priv = container_of(work, drm_i915_private_t,
 				mm.retire_work.work);
@ -1948,11 +1950,31 @@ i915_gem_retire_work_handler(struct work_struct *work)

 	i915_gem_retire_requests(dev);

-	if (!dev_priv->mm.suspended &&
-		(!list_empty(&dev_priv->ring[RCS].request_list) ||
-		 !list_empty(&dev_priv->ring[VCS].request_list) ||
-		 !list_empty(&dev_priv->ring[BCS].request_list)))
+	/* Send a periodic flush down the ring so we don't hold onto GEM
+	 * objects indefinitely.
+	 */
+	idle = true;
+	for (i = 0; i < I915_NUM_RINGS; i++) {
+		struct intel_ring_buffer *ring = &dev_priv->ring[i];
+
+		if (!list_empty(&ring->gpu_write_list)) {
+			struct drm_i915_gem_request *request;
+			int ret;
+
+			ret = i915_gem_flush_ring(dev, ring, 0,
+						  I915_GEM_GPU_DOMAINS);
+			request = kzalloc(sizeof(*request), GFP_KERNEL);
+			if (ret || request == NULL ||
+			    i915_add_request(dev, NULL, request, ring))
+			    kfree(request);
+		}
+
+		idle &= list_empty(&ring->request_list);
+	}
+
+	if (!dev_priv->mm.suspended && !idle)
 		queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
+
 	mutex_unlock(&dev->struct_mutex);
 }

@ -2142,25 +2164,37 @@ i915_gem_object_unbind(struct drm_i915_gem_object *obj)
 	return ret;
 }

-void
+int
 i915_gem_flush_ring(struct drm_device *dev,
 		    struct intel_ring_buffer *ring,
 		    uint32_t invalidate_domains,
 		    uint32_t flush_domains)
 {
-	ring->flush(ring, invalidate_domains, flush_domains);
+	int ret;
+
+	ret = ring->flush(ring, invalidate_domains, flush_domains);
+	if (ret)
+		return ret;
+
 	i915_gem_process_flushing_list(dev, flush_domains, ring);
+	return 0;
 }

 static int i915_ring_idle(struct drm_device *dev,
 			  struct intel_ring_buffer *ring)
 {
+	int ret;
+
 	if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
 		return 0;

-	if (!list_empty(&ring->gpu_write_list))
-		i915_gem_flush_ring(dev, ring,
+	if (!list_empty(&ring->gpu_write_list)) {
+		ret = i915_gem_flush_ring(dev, ring,
 				    I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
+		if (ret)
+			return ret;
+	}
+
 	return i915_wait_request(dev,
 				 i915_gem_next_request_seqno(dev, ring),
 				 ring);
@ -2370,10 +2404,13 @@ i915_gem_object_flush_fence(struct drm_i915_gem_object *obj,
 	int ret;

 	if (obj->fenced_gpu_access) {
-		if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
-			i915_gem_flush_ring(obj->base.dev,
+		if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
+			ret = i915_gem_flush_ring(obj->base.dev,
 						  obj->last_fenced_ring,
 						  0, obj->base.write_domain);
+			if (ret)
+				return ret;
+		}

 		obj->fenced_gpu_access = false;
 	}
@ -2393,6 +2430,12 @@ i915_gem_object_flush_fence(struct drm_i915_gem_object *obj,
 		obj->last_fenced_ring = NULL;
 	}

+	/* Ensure that all CPU reads are completed before installing a fence
+	 * and all writes before removing the fence.
+	 */
+	if (obj->base.read_domains & I915_GEM_DOMAIN_GTT)
+		mb();
+
 	return 0;
 }

@ -2523,9 +2566,12 @@ i915_gem_object_get_fence(struct drm_i915_gem_object *obj,
 				return ret;
 		} else if (obj->tiling_changed) {
 			if (obj->fenced_gpu_access) {
-				if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
-					i915_gem_flush_ring(obj->base.dev, obj->ring,
+				if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
+					ret = i915_gem_flush_ring(obj->base.dev, obj->ring,
 								  0, obj->base.write_domain);
+					if (ret)
+						return ret;
+				}

 				obj->fenced_gpu_access = false;
 			}
@ -2736,10 +2782,8 @@ i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
 		obj->gtt_space = NULL;

 		if (ret == -ENOMEM) {
-			/* first try to clear up some space from the GTT */
-			ret = i915_gem_evict_something(dev, size,
-						       alignment,
-						       map_and_fenceable);
+			/* first try to reclaim some memory by clearing the GTT */
+			ret = i915_gem_evict_everything(dev, false);
 			if (ret) {
 				/* now try to shrink everyone else */
 				if (gfpmask) {
@ -2747,7 +2791,7 @@ i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
 					goto search_free;
 				}

-				return ret;
+				return -ENOMEM;
 			}

 			goto search_free;
@ -2762,9 +2806,7 @@ i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
 		drm_mm_put_block(obj->gtt_space);
 		obj->gtt_space = NULL;

-		ret = i915_gem_evict_something(dev, size,
-					       alignment, map_and_fenceable);
-		if (ret)
+		if (i915_gem_evict_everything(dev, false))
 			return ret;

 		goto search_free;
@ -2811,17 +2853,16 @@ i915_gem_clflush_object(struct drm_i915_gem_object *obj)
 }

 /** Flushes any GPU write domain for the object if it's dirty. */
-static void
+static int
 i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj)
 {
 	struct drm_device *dev = obj->base.dev;

 	if ((obj->base.write_domain & I915_GEM_GPU_DOMAINS) == 0)
-		return;
+		return 0;

 	/* Queue the GPU write cache flushing we need. */
-	i915_gem_flush_ring(dev, obj->ring, 0, obj->base.write_domain);
-	BUG_ON(obj->base.write_domain);
+	return i915_gem_flush_ring(dev, obj->ring, 0, obj->base.write_domain);
 }

 /** Flushes the GTT write domain for the object if it's dirty. */
@ -2836,7 +2877,13 @@ i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj)
 	/* No actual flushing is required for the GTT write domain.  Writes
 	 * to it immediately go to main memory as far as we know, so there's
 	 * no chipset flush.  It also doesn't land in render cache.
+	 *
+	 * However, we do have to enforce the order so that all writes through
+	 * the GTT land before any writes to the device, such as updates to
+	 * the GATT itself.
 	 */
+	wmb();
+
 	i915_gem_release_mmap(obj);

 	old_write_domain = obj->base.write_domain;
@ -2882,7 +2929,10 @@ i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write)
 	if (obj->gtt_space == NULL)
 		return -EINVAL;

-	i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+
 	if (obj->pending_gpu_write || write) {
 		ret = i915_gem_object_wait_rendering(obj, true);
 		if (ret)
@ -2927,7 +2977,10 @@ i915_gem_object_set_to_display_plane(struct drm_i915_gem_object *obj,
 	if (obj->gtt_space == NULL)
 		return -EINVAL;

-	i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+

 	/* Currently, we are always called from an non-interruptible context. */
 	if (pipelined != obj->ring) {
@ -2952,12 +3005,17 @@ int
 i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj,
 			  bool interruptible)
 {
+	int ret;
+
 	if (!obj->active)
 		return 0;

-	if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
-		i915_gem_flush_ring(obj->base.dev, obj->ring,
+	if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
+		ret = i915_gem_flush_ring(obj->base.dev, obj->ring,
 					  0, obj->base.write_domain);
+		if (ret)
+			return ret;
+	}

 	return i915_gem_object_wait_rendering(obj, interruptible);
 }
@ -2974,7 +3032,10 @@ i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write)
 	uint32_t old_write_domain, old_read_domains;
 	int ret;

-	i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+
 	ret = i915_gem_object_wait_rendering(obj, true);
 	if (ret)
 		return ret;
@ -3069,7 +3130,10 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj,
 	if (offset == 0 && size == obj->base.size)
 		return i915_gem_object_set_to_cpu_domain(obj, 0);

-	i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+
 	ret = i915_gem_object_wait_rendering(obj, true);
 	if (ret)
 		return ret;
@ -3362,7 +3426,7 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 		 * flush earlier is beneficial.
 		 */
 		if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
-			i915_gem_flush_ring(dev, obj->ring,
+			ret = i915_gem_flush_ring(dev, obj->ring,
 						  0, obj->base.write_domain);
 		} else if (obj->ring->outstanding_lazy_request ==
 			   obj->last_rendering_seqno) {
--- a/drivers/gpu/drm/i915/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@ -127,9 +127,15 @@ i915_gem_evict_something(struct drm_device *dev, int min_size,
 	}

 	/* Nothing found, clean up and bail out! */
-	list_for_each_entry(obj, &unwind_list, exec_list) {
+	while (!list_empty(&unwind_list)) {
+		obj = list_first_entry(&unwind_list,
+				       struct drm_i915_gem_object,
+				       exec_list);
+
 		ret = drm_mm_scan_remove_block(obj->gtt_space);
 		BUG_ON(ret);
+
+		list_del_init(&obj->exec_list);
 		drm_gem_object_unreference(&obj->base);
 	}

@ -162,6 +168,7 @@ found:
 				       exec_list);
 		if (ret == 0)
 			ret = i915_gem_object_unbind(obj);
+
 		list_del_init(&obj->exec_list);
 		drm_gem_object_unreference(&obj->base);
 	}
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@ -268,7 +268,6 @@ eb_destroy(struct eb_objects *eb)
 static int
 i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
 				   struct eb_objects *eb,
-				   struct drm_i915_gem_exec_object2 *entry,
 				   struct drm_i915_gem_relocation_entry *reloc)
 {
 	struct drm_device *dev = obj->base.dev;
@ -411,10 +410,10 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,

 static int
 i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
-				    struct eb_objects *eb,
-				    struct drm_i915_gem_exec_object2 *entry)
+				    struct eb_objects *eb)
 {
 	struct drm_i915_gem_relocation_entry __user *user_relocs;
+	struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
 	int i, ret;

 	user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
@ -426,7 +425,7 @@ i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
 					      sizeof(reloc)))
 			return -EFAULT;

-		ret = i915_gem_execbuffer_relocate_entry(obj, eb, entry, &reloc);
+		ret = i915_gem_execbuffer_relocate_entry(obj, eb, &reloc);
 		if (ret)
 			return ret;

@ -442,13 +441,13 @@ i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
 static int
 i915_gem_execbuffer_relocate_object_slow(struct drm_i915_gem_object *obj,
 					 struct eb_objects *eb,
-					 struct drm_i915_gem_exec_object2 *entry,
 					 struct drm_i915_gem_relocation_entry *relocs)
 {
+	const struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
 	int i, ret;

 	for (i = 0; i < entry->relocation_count; i++) {
-		ret = i915_gem_execbuffer_relocate_entry(obj, eb, entry, &relocs[i]);
+		ret = i915_gem_execbuffer_relocate_entry(obj, eb, &relocs[i]);
 		if (ret)
 			return ret;
 	}
@ -459,8 +458,7 @@ i915_gem_execbuffer_relocate_object_slow(struct drm_i915_gem_object *obj,
 static int
 i915_gem_execbuffer_relocate(struct drm_device *dev,
 			     struct eb_objects *eb,
-			     struct list_head *objects,
-			     struct drm_i915_gem_exec_object2 *exec)
+			     struct list_head *objects)
 {
 	struct drm_i915_gem_object *obj;
 	int ret;
@ -468,7 +466,7 @@ i915_gem_execbuffer_relocate(struct drm_device *dev,
 	list_for_each_entry(obj, objects, exec_list) {
 		obj->base.pending_read_domains = 0;
 		obj->base.pending_write_domain = 0;
-		ret = i915_gem_execbuffer_relocate_object(obj, eb, exec++);
+		ret = i915_gem_execbuffer_relocate_object(obj, eb);
 		if (ret)
 			return ret;
 	}
@ -479,13 +477,36 @@ i915_gem_execbuffer_relocate(struct drm_device *dev,
 static int
 i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
 			    struct drm_file *file,
-			    struct list_head *objects,
-			    struct drm_i915_gem_exec_object2 *exec)
+			    struct list_head *objects)
 {
 	struct drm_i915_gem_object *obj;
-	struct drm_i915_gem_exec_object2 *entry;
 	int ret, retry;
 	bool has_fenced_gpu_access = INTEL_INFO(ring->dev)->gen < 4;
+	struct list_head ordered_objects;
+
+	INIT_LIST_HEAD(&ordered_objects);
+	while (!list_empty(objects)) {
+		struct drm_i915_gem_exec_object2 *entry;
+		bool need_fence, need_mappable;
+
+		obj = list_first_entry(objects,
+				       struct drm_i915_gem_object,
+				       exec_list);
+		entry = obj->exec_entry;
+
+		need_fence =
+			has_fenced_gpu_access &&
+			entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
+			obj->tiling_mode != I915_TILING_NONE;
+		need_mappable =
+			entry->relocation_count ? true : need_fence;
+
+		if (need_mappable)
+			list_move(&obj->exec_list, &ordered_objects);
+		else
+			list_move_tail(&obj->exec_list, &ordered_objects);
+	}
+	list_splice(&ordered_objects, objects);

 	/* Attempt to pin all of the buffers into the GTT.
 	 * This is done in 3 phases:
@ -504,14 +525,11 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
 		ret = 0;

 		/* Unbind any ill-fitting objects or pin. */
-		entry = exec;
 		list_for_each_entry(obj, objects, exec_list) {
+			struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
 			bool need_fence, need_mappable;
-
-			if (!obj->gtt_space) {
-				entry++;
+			if (!obj->gtt_space)
 				continue;
-			}

 			need_fence =
 				has_fenced_gpu_access &&
@ -534,8 +552,8 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
 		}

 		/* Bind fresh objects */
-		entry = exec;
 		list_for_each_entry(obj, objects, exec_list) {
+			struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
 			bool need_fence;

 			need_fence =
@ -570,7 +588,6 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
 			}

 			entry->offset = obj->gtt_offset;
-			entry++;
 		}

 		/* Decrement pin count for bound objects */
@ -622,7 +639,7 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
 	int i, total, ret;

 	/* We may process another execbuffer during the unlock... */
-	while (list_empty(objects)) {
+	while (!list_empty(objects)) {
 		obj = list_first_entry(objects,
 				       struct drm_i915_gem_object,
 				       exec_list);
@ -665,7 +682,6 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
 	}

 	/* reacquire the objects */
-	INIT_LIST_HEAD(objects);
 	eb_reset(eb);
 	for (i = 0; i < count; i++) {
 		struct drm_i915_gem_object *obj;
@ -681,10 +697,11 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev,

 		list_add_tail(&obj->exec_list, objects);
 		obj->exec_handle = exec[i].handle;
+		obj->exec_entry = &exec[i];
 		eb_add_object(eb, obj);
 	}

-	ret = i915_gem_execbuffer_reserve(ring, file, objects, exec);
+	ret = i915_gem_execbuffer_reserve(ring, file, objects);
 	if (ret)
 		goto err;

@ -693,7 +710,6 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
 		obj->base.pending_read_domains = 0;
 		obj->base.pending_write_domain = 0;
 		ret = i915_gem_execbuffer_relocate_object_slow(obj, eb,
-							       exec,
 							       reloc + total);
 		if (ret)
 			goto err;
@ -713,27 +729,36 @@ err:
 	return ret;
 }

-static void
+static int
 i915_gem_execbuffer_flush(struct drm_device *dev,
 			  uint32_t invalidate_domains,
 			  uint32_t flush_domains,
 			  uint32_t flush_rings)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	int i;
+	int i, ret;

 	if (flush_domains & I915_GEM_DOMAIN_CPU)
 		intel_gtt_chipset_flush();

+	if (flush_domains & I915_GEM_DOMAIN_GTT)
+		wmb();
+
 	if ((flush_domains | invalidate_domains) & I915_GEM_GPU_DOMAINS) {
 		for (i = 0; i < I915_NUM_RINGS; i++)
-			if (flush_rings & (1 << i))
-				i915_gem_flush_ring(dev, &dev_priv->ring[i],
+			if (flush_rings & (1 << i)) {
+				ret = i915_gem_flush_ring(dev,
+							  &dev_priv->ring[i],
 							  invalidate_domains,
 							  flush_domains);
+				if (ret)
+					return ret;
 			}
 	}

+	return 0;
+}
+
 static int
 i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj,
 			       struct intel_ring_buffer *to)
@ -795,10 +820,12 @@ i915_gem_execbuffer_move_to_gpu(struct intel_ring_buffer *ring,
 			 cd.invalidate_domains,
 			 cd.flush_domains);
 #endif
-		i915_gem_execbuffer_flush(ring->dev,
+		ret = i915_gem_execbuffer_flush(ring->dev,
 						cd.invalidate_domains,
 						cd.flush_domains,
 						cd.flush_rings);
+		if (ret)
+			return ret;
 	}

 	list_for_each_entry(obj, objects, exec_list) {
@ -921,7 +948,7 @@ i915_gem_execbuffer_retire_commands(struct drm_device *dev,
 				    struct intel_ring_buffer *ring)
 {
 	struct drm_i915_gem_request *request;
-	u32 flush_domains;
+	u32 invalidate;

 	/*
 	 * Ensure that the commands in the batch buffer are
@ -929,11 +956,13 @@ i915_gem_execbuffer_retire_commands(struct drm_device *dev,
 	 *
 	 * The sampler always gets flushed on i965 (sigh).
 	 */
-	flush_domains = 0;
+	invalidate = I915_GEM_DOMAIN_COMMAND;
 	if (INTEL_INFO(dev)->gen >= 4)
-		flush_domains |= I915_GEM_DOMAIN_SAMPLER;
-
-	ring->flush(ring, I915_GEM_DOMAIN_COMMAND, flush_domains);
+		invalidate |= I915_GEM_DOMAIN_SAMPLER;
+	if (ring->flush(ring, invalidate, 0)) {
+		i915_gem_next_request_seqno(dev, ring);
+		return;
+	}

 	/* Add a breadcrumb for the completion of the batch buffer */
 	request = kzalloc(sizeof(*request), GFP_KERNEL);
@ -1098,16 +1127,22 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,

 		list_add_tail(&obj->exec_list, &objects);
 		obj->exec_handle = exec[i].handle;
+		obj->exec_entry = &exec[i];
 		eb_add_object(eb, obj);
 	}

+	/* take note of the batch buffer before we might reorder the lists */
+	batch_obj = list_entry(objects.prev,
+			       struct drm_i915_gem_object,
+			       exec_list);
+
 	/* Move the objects en-masse into the GTT, evicting if necessary. */
-	ret = i915_gem_execbuffer_reserve(ring, file, &objects, exec);
+	ret = i915_gem_execbuffer_reserve(ring, file, &objects);
 	if (ret)
 		goto err;

 	/* The objects are in their final locations, apply the relocations. */
-	ret = i915_gem_execbuffer_relocate(dev, eb, &objects, exec);
+	ret = i915_gem_execbuffer_relocate(dev, eb, &objects);
 	if (ret) {
 		if (ret == -EFAULT) {
 			ret = i915_gem_execbuffer_relocate_slow(dev, file, ring,
@ -1121,9 +1156,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	}

 	/* Set the pending read domains for the batch buffer to COMMAND */
-	batch_obj = list_entry(objects.prev,
-			       struct drm_i915_gem_object,
-			       exec_list);
 	if (batch_obj->base.pending_write_domain) {
 		DRM_ERROR("Attempting to use self-modifying batch buffer\n");
 		ret = -EINVAL;
@ -1340,4 +1372,3 @@ i915_gem_execbuffer2(struct drm_device *dev, void *data,
 	drm_free_large(exec2_list);
 	return ret;
 }
-
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@ -85,15 +85,11 @@ int i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj)

 void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
 {
-	struct drm_device *dev = obj->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	if (dev_priv->mm.gtt->needs_dmar) {
-		intel_gtt_unmap_memory(obj->sg_list, obj->num_sg);
-		obj->sg_list = NULL;
-		obj->num_sg = 0;
-	}
-
 	intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT,
 			      obj->base.size >> PAGE_SHIFT);
+
+	if (obj->sg_list) {
+		intel_gtt_unmap_memory(obj->sg_list, obj->num_sg);
+		obj->sg_list = NULL;
+	}
 }
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@ -64,26 +64,6 @@
 #define DRM_I915_VBLANK_PIPE_ALL	(DRM_I915_VBLANK_PIPE_A | \
 					 DRM_I915_VBLANK_PIPE_B)

-void
-ironlake_enable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
-{
-	if ((dev_priv->gt_irq_mask & mask) != 0) {
-		dev_priv->gt_irq_mask &= ~mask;
-		I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
-		POSTING_READ(GTIMR);
-	}
-}
-
-void
-ironlake_disable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
-{
-	if ((dev_priv->gt_irq_mask & mask) != mask) {
-		dev_priv->gt_irq_mask |= mask;
-		I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
-		POSTING_READ(GTIMR);
-	}
-}
-
 /* For display hotplug interrupt */
 static void
 ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
@ -105,26 +85,6 @@ ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
 	}
 }

-void
-i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
-{
-	if ((dev_priv->irq_mask & mask) != 0) {
-		dev_priv->irq_mask &= ~mask;
-		I915_WRITE(IMR, dev_priv->irq_mask);
-		POSTING_READ(IMR);
-	}
-}
-
-void
-i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
-{
-	if ((dev_priv->irq_mask & mask) != mask) {
-		dev_priv->irq_mask |= mask;
-		I915_WRITE(IMR, dev_priv->irq_mask);
-		POSTING_READ(IMR);
-	}
-}
-
 static inline u32
 i915_pipestat(int pipe)
 {
@ -389,9 +349,12 @@ static void notify_ring(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 seqno = ring->get_seqno(ring);
-	ring->irq_seqno = seqno;
+
 	trace_i915_gem_request_complete(dev, seqno);
+
+	ring->irq_seqno = seqno;
 	wake_up_all(&ring->irq_queue);
+
 	dev_priv->hangcheck_count = 0;
 	mod_timer(&dev_priv->hangcheck_timer,
 		  jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
@ -435,6 +398,50 @@ static void gen6_pm_irq_handler(struct drm_device *dev)
 	I915_WRITE(GEN6_PMIIR, pm_iir);
 }

+static void pch_irq_handler(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 pch_iir;
+
+	pch_iir = I915_READ(SDEIIR);
+
+	if (pch_iir & SDE_AUDIO_POWER_MASK)
+		DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
+				 (pch_iir & SDE_AUDIO_POWER_MASK) >>
+				 SDE_AUDIO_POWER_SHIFT);
+
+	if (pch_iir & SDE_GMBUS)
+		DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
+
+	if (pch_iir & SDE_AUDIO_HDCP_MASK)
+		DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
+
+	if (pch_iir & SDE_AUDIO_TRANS_MASK)
+		DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
+
+	if (pch_iir & SDE_POISON)
+		DRM_ERROR("PCH poison interrupt\n");
+
+	if (pch_iir & SDE_FDI_MASK) {
+		u32 fdia, fdib;
+
+		fdia = I915_READ(FDI_RXA_IIR);
+		fdib = I915_READ(FDI_RXB_IIR);
+		DRM_DEBUG_DRIVER("PCH FDI RX interrupt; FDI RXA IIR: 0x%08x, FDI RXB IIR: 0x%08x\n", fdia, fdib);
+	}
+
+	if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
+		DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
+
+	if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR))
+		DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
+
+	if (pch_iir & SDE_TRANSB_FIFO_UNDER)
+		DRM_DEBUG_DRIVER("PCH transcoder B underrun interrupt\n");
+	if (pch_iir & SDE_TRANSA_FIFO_UNDER)
+		DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
+}
+
 static irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@ -502,8 +509,11 @@ static irqreturn_t ironlake_irq_handler(struct drm_device *dev)
 		drm_handle_vblank(dev, 1);

 	/* check event from PCH */
-	if ((de_iir & DE_PCH_EVENT) && (pch_iir & hotplug_mask))
+	if (de_iir & DE_PCH_EVENT) {
+		if (pch_iir & hotplug_mask)
 			queue_work(dev_priv->wq, &dev_priv->hotplug_work);
+		pch_irq_handler(dev);
+	}

 	if (de_iir & DE_PCU_EVENT) {
 		I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
@ -556,10 +566,9 @@ static void i915_error_work_func(struct work_struct *work)

 #ifdef CONFIG_DEBUG_FS
 static struct drm_i915_error_object *
-i915_error_object_create(struct drm_device *dev,
+i915_error_object_create(struct drm_i915_private *dev_priv,
 			 struct drm_i915_gem_object *src)
 {
-	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_error_object *dst;
 	int page, page_count;
 	u32 reloc_offset;
@ -632,52 +641,6 @@ i915_error_state_free(struct drm_device *dev,
 	kfree(error);
 }

-static u32
-i915_get_bbaddr(struct drm_device *dev, u32 *ring)
-{
-	u32 cmd;
-
-	if (IS_I830(dev) || IS_845G(dev))
-		cmd = MI_BATCH_BUFFER;
-	else if (INTEL_INFO(dev)->gen >= 4)
-		cmd = (MI_BATCH_BUFFER_START | (2 << 6) |
-		       MI_BATCH_NON_SECURE_I965);
-	else
-		cmd = (MI_BATCH_BUFFER_START | (2 << 6));
-
-	return ring[0] == cmd ? ring[1] : 0;
-}
-
-static u32
-i915_ringbuffer_last_batch(struct drm_device *dev,
-			   struct intel_ring_buffer *ring)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 head, bbaddr;
-	u32 *val;
-
-	/* Locate the current position in the ringbuffer and walk back
-	 * to find the most recently dispatched batch buffer.
-	 */
-	head = I915_READ_HEAD(ring) & HEAD_ADDR;
-
-	val = (u32 *)(ring->virtual_start + head);
-	while (--val >= (u32 *)ring->virtual_start) {
-		bbaddr = i915_get_bbaddr(dev, val);
-		if (bbaddr)
-			return bbaddr;
-	}
-
-	val = (u32 *)(ring->virtual_start + ring->size);
-	while (--val >= (u32 *)ring->virtual_start) {
-		bbaddr = i915_get_bbaddr(dev, val);
-		if (bbaddr)
-			return bbaddr;
-	}
-
-	return 0;
-}
-
 static u32 capture_bo_list(struct drm_i915_error_buffer *err,
 			   int count,
 			   struct list_head *head)
@ -702,6 +665,7 @@ static u32 capture_bo_list(struct drm_i915_error_buffer *err,
 		err->dirty = obj->dirty;
 		err->purgeable = obj->madv != I915_MADV_WILLNEED;
 		err->ring = obj->ring ? obj->ring->id : 0;
+		err->agp_type = obj->agp_type == AGP_USER_CACHED_MEMORY;

 		if (++i == count)
 			break;
@ -741,6 +705,36 @@ static void i915_gem_record_fences(struct drm_device *dev,
 	}
 }

+static struct drm_i915_error_object *
+i915_error_first_batchbuffer(struct drm_i915_private *dev_priv,
+			     struct intel_ring_buffer *ring)
+{
+	struct drm_i915_gem_object *obj;
+	u32 seqno;
+
+	if (!ring->get_seqno)
+		return NULL;
+
+	seqno = ring->get_seqno(ring);
+	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
+		if (obj->ring != ring)
+			continue;
+
+		if (!i915_seqno_passed(obj->last_rendering_seqno, seqno))
+			continue;
+
+		if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0)
+			continue;
+
+		/* We need to copy these to an anonymous buffer as the simplest
+		 * method to avoid being overwritten by userspace.
+		 */
+		return i915_error_object_create(dev_priv, obj);
+	}
+
+	return NULL;
+}
+
 /**
 * i915_capture_error_state - capture an error record for later analysis
 * @dev: drm device
@ -755,10 +749,8 @@ static void i915_capture_error_state(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj;
 	struct drm_i915_error_state *error;
-	struct drm_i915_gem_object *batchbuffer[2];
 	unsigned long flags;
-	u32 bbaddr;
-	int count;
+	int i;

 	spin_lock_irqsave(&dev_priv->error_lock, flags);
 	error = dev_priv->first_error;
@ -817,83 +809,30 @@ static void i915_capture_error_state(struct drm_device *dev)
 	}
 	i915_gem_record_fences(dev, error);

-	bbaddr = i915_ringbuffer_last_batch(dev, &dev_priv->ring[RCS]);
-
-	/* Grab the current batchbuffer, most likely to have crashed. */
-	batchbuffer[0] = NULL;
-	batchbuffer[1] = NULL;
-	count = 0;
-	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
-		if (batchbuffer[0] == NULL &&
-		    bbaddr >= obj->gtt_offset &&
-		    bbaddr < obj->gtt_offset + obj->base.size)
-			batchbuffer[0] = obj;
-
-		if (batchbuffer[1] == NULL &&
-		    error->acthd >= obj->gtt_offset &&
-		    error->acthd < obj->gtt_offset + obj->base.size)
-			batchbuffer[1] = obj;
-
-		count++;
-	}
-	/* Scan the other lists for completeness for those bizarre errors. */
-	if (batchbuffer[0] == NULL || batchbuffer[1] == NULL) {
-		list_for_each_entry(obj, &dev_priv->mm.flushing_list, mm_list) {
-			if (batchbuffer[0] == NULL &&
-			    bbaddr >= obj->gtt_offset &&
-			    bbaddr < obj->gtt_offset + obj->base.size)
-				batchbuffer[0] = obj;
-
-			if (batchbuffer[1] == NULL &&
-			    error->acthd >= obj->gtt_offset &&
-			    error->acthd < obj->gtt_offset + obj->base.size)
-				batchbuffer[1] = obj;
-
-			if (batchbuffer[0] && batchbuffer[1])
-				break;
-		}
-	}
-	if (batchbuffer[0] == NULL || batchbuffer[1] == NULL) {
-		list_for_each_entry(obj, &dev_priv->mm.inactive_list, mm_list) {
-			if (batchbuffer[0] == NULL &&
-			    bbaddr >= obj->gtt_offset &&
-			    bbaddr < obj->gtt_offset + obj->base.size)
-				batchbuffer[0] = obj;
-
-			if (batchbuffer[1] == NULL &&
-			    error->acthd >= obj->gtt_offset &&
-			    error->acthd < obj->gtt_offset + obj->base.size)
-				batchbuffer[1] = obj;
-
-			if (batchbuffer[0] && batchbuffer[1])
-				break;
-		}
-	}
-
-	/* We need to copy these to an anonymous buffer as the simplest
-	 * method to avoid being overwritten by userspace.
-	 */
-	error->batchbuffer[0] = i915_error_object_create(dev, batchbuffer[0]);
-	if (batchbuffer[1] != batchbuffer[0])
-		error->batchbuffer[1] = i915_error_object_create(dev, batchbuffer[1]);
-	else
-		error->batchbuffer[1] = NULL;
+	/* Record the active batchbuffers */
+	for (i = 0; i < I915_NUM_RINGS; i++)
+		error->batchbuffer[i] =
+			i915_error_first_batchbuffer(dev_priv,
+						     &dev_priv->ring[i]);

 	/* Record the ringbuffer */
-	error->ringbuffer = i915_error_object_create(dev,
+	error->ringbuffer = i915_error_object_create(dev_priv,
 						     dev_priv->ring[RCS].obj);

 	/* Record buffers on the active and pinned lists. */
 	error->active_bo = NULL;
 	error->pinned_bo = NULL;

-	error->active_bo_count = count;
+	i = 0;
+	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list)
+		i++;
+	error->active_bo_count = i;
 	list_for_each_entry(obj, &dev_priv->mm.pinned_list, mm_list)
-		count++;
-	error->pinned_bo_count = count - error->active_bo_count;
+		i++;
+	error->pinned_bo_count = i - error->active_bo_count;

-	if (count) {
-		error->active_bo = kmalloc(sizeof(*error->active_bo)*count,
+	if (i) {
+		error->active_bo = kmalloc(sizeof(*error->active_bo)*i,
 					   GFP_ATOMIC);
 		if (error->active_bo)
 			error->pinned_bo =
@ -1673,11 +1612,6 @@ static int ironlake_irq_postinstall(struct drm_device *dev)

 	I915_WRITE(GTIIR, I915_READ(GTIIR));
 	I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
-	if (IS_GEN6(dev)) {
-		I915_WRITE(GEN6_RENDER_IMR, ~GEN6_RENDER_USER_INTERRUPT);
-		I915_WRITE(GEN6_BSD_IMR, ~GEN6_BSD_USER_INTERRUPT);
-		I915_WRITE(GEN6_BLITTER_IMR, ~GEN6_BLITTER_USER_INTERRUPT);
-	}

 	if (IS_GEN6(dev))
 		render_irqs =
@ -1698,6 +1632,9 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 	} else {
 		hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
 			       SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
+		hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK;
+		I915_WRITE(FDI_RXA_IMR, 0);
+		I915_WRITE(FDI_RXB_IMR, 0);
 	}

 	dev_priv->pch_irq_mask = ~hotplug_mask;
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@ -145,6 +145,8 @@
 #define   MI_END_SCENE		(1 << 4) /* flush binner and incr scene count */
 #define   MI_INVALIDATE_ISP	(1 << 5) /* invalidate indirect state pointers */
 #define MI_BATCH_BUFFER_END	MI_INSTR(0x0a, 0)
+#define MI_SUSPEND_FLUSH	MI_INSTR(0x0b, 0)
+#define   MI_SUSPEND_FLUSH_EN	(1<<0)
 #define MI_REPORT_HEAD		MI_INSTR(0x07, 0)
 #define MI_OVERLAY_FLIP		MI_INSTR(0x11,0)
 #define   MI_OVERLAY_CONTINUE	(0x0<<21)
@ -159,6 +161,7 @@
 #define   MI_MM_SPACE_PHYSICAL		(0<<8)
 #define   MI_SAVE_EXT_STATE_EN		(1<<3)
 #define   MI_RESTORE_EXT_STATE_EN	(1<<2)
+#define   MI_FORCE_RESTORE		(1<<1)
 #define   MI_RESTORE_INHIBIT		(1<<0)
 #define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
 #define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
@ -288,6 +291,7 @@
 #define RING_HWS_PGA_GEN6(base)	((base)+0x2080)
 #define RING_ACTHD(base)	((base)+0x74)
 #define RING_NOPID(base)	((base)+0x94)
+#define RING_IMR(base)		((base)+0xa8)
 #define   TAIL_ADDR		0x001FFFF8
 #define   HEAD_WRAP_COUNT	0xFFE00000
 #define   HEAD_WRAP_ONE		0x00200000
@ -1130,9 +1134,50 @@
 #define RCBMINAVG		0x111a0
 #define RCUPEI			0x111b0
 #define RCDNEI			0x111b4
-#define MCHBAR_RENDER_STANDBY		0x111b8
-#define   RCX_SW_EXIT		(1<<23)
-#define   RSX_STATUS_MASK	0x00700000
+#define RSTDBYCTL		0x111b8
+#define   RS1EN			(1<<31)
+#define   RS2EN			(1<<30)
+#define   RS3EN			(1<<29)
+#define   D3RS3EN		(1<<28) /* Display D3 imlies RS3 */
+#define   SWPROMORSX		(1<<27) /* RSx promotion timers ignored */
+#define   RCWAKERW		(1<<26) /* Resetwarn from PCH causes wakeup */
+#define   DPRSLPVREN		(1<<25) /* Fast voltage ramp enable */
+#define   GFXTGHYST		(1<<24) /* Hysteresis to allow trunk gating */
+#define   RCX_SW_EXIT		(1<<23) /* Leave RSx and prevent re-entry */
+#define   RSX_STATUS_MASK	(7<<20)
+#define   RSX_STATUS_ON		(0<<20)
+#define   RSX_STATUS_RC1	(1<<20)
+#define   RSX_STATUS_RC1E	(2<<20)
+#define   RSX_STATUS_RS1	(3<<20)
+#define   RSX_STATUS_RS2	(4<<20) /* aka rc6 */
+#define   RSX_STATUS_RSVD	(5<<20) /* deep rc6 unsupported on ilk */
+#define   RSX_STATUS_RS3	(6<<20) /* rs3 unsupported on ilk */
+#define   RSX_STATUS_RSVD2	(7<<20)
+#define   UWRCRSXE		(1<<19) /* wake counter limit prevents rsx */
+#define   RSCRP			(1<<18) /* rs requests control on rs1/2 reqs */
+#define   JRSC			(1<<17) /* rsx coupled to cpu c-state */
+#define   RS2INC0		(1<<16) /* allow rs2 in cpu c0 */
+#define   RS1CONTSAV_MASK	(3<<14)
+#define   RS1CONTSAV_NO_RS1	(0<<14) /* rs1 doesn't save/restore context */
+#define   RS1CONTSAV_RSVD	(1<<14)
+#define   RS1CONTSAV_SAVE_RS1	(2<<14) /* rs1 saves context */
+#define   RS1CONTSAV_FULL_RS1	(3<<14) /* rs1 saves and restores context */
+#define   NORMSLEXLAT_MASK	(3<<12)
+#define   SLOW_RS123		(0<<12)
+#define   SLOW_RS23		(1<<12)
+#define   SLOW_RS3		(2<<12)
+#define   NORMAL_RS123		(3<<12)
+#define   RCMODE_TIMEOUT	(1<<11) /* 0 is eval interval method */
+#define   IMPROMOEN		(1<<10) /* promo is immediate or delayed until next idle interval (only for timeout method above) */
+#define   RCENTSYNC		(1<<9) /* rs coupled to cpu c-state (3/6/7) */
+#define   STATELOCK		(1<<7) /* locked to rs_cstate if 0 */
+#define   RS_CSTATE_MASK	(3<<4)
+#define   RS_CSTATE_C367_RS1	(0<<4)
+#define   RS_CSTATE_C36_RS1_C7_RS2 (1<<4)
+#define   RS_CSTATE_RSVD	(2<<4)
+#define   RS_CSTATE_C367_RS2	(3<<4)
+#define   REDSAVES		(1<<3) /* no context save if was idle during rs0 */
+#define   REDRESTORES		(1<<2) /* no restore if was idle during rs0 */
 #define VIDCTL			0x111c0
 #define VIDSTS			0x111c8
 #define VIDSTART		0x111cc /* 8 bits */
@ -2345,8 +2390,13 @@

 /* Memory latency timer register */
 #define MLTR_ILK		0x11222
+#define  MLTR_WM1_SHIFT		0
+#define  MLTR_WM2_SHIFT		8
 /* the unit of memory self-refresh latency time is 0.5us */
 #define  ILK_SRLT_MASK		0x3f
+#define ILK_LATENCY(shift)	(I915_READ(MLTR_ILK) >> (shift) & ILK_SRLT_MASK)
+#define ILK_READ_WM1_LATENCY()	ILK_LATENCY(MLTR_WM1_SHIFT)
+#define ILK_READ_WM2_LATENCY()	ILK_LATENCY(MLTR_WM2_SHIFT)

 /* define the fifo size on Ironlake */
 #define ILK_DISPLAY_FIFO	128
@ -2728,12 +2778,41 @@
 /* PCH */

 /* south display engine interrupt */
+#define SDE_AUDIO_POWER_D	(1 << 27)
+#define SDE_AUDIO_POWER_C	(1 << 26)
+#define SDE_AUDIO_POWER_B	(1 << 25)
+#define SDE_AUDIO_POWER_SHIFT	(25)
+#define SDE_AUDIO_POWER_MASK	(7 << SDE_AUDIO_POWER_SHIFT)
+#define SDE_GMBUS		(1 << 24)
+#define SDE_AUDIO_HDCP_TRANSB	(1 << 23)
+#define SDE_AUDIO_HDCP_TRANSA	(1 << 22)
+#define SDE_AUDIO_HDCP_MASK	(3 << 22)
+#define SDE_AUDIO_TRANSB	(1 << 21)
+#define SDE_AUDIO_TRANSA	(1 << 20)
+#define SDE_AUDIO_TRANS_MASK	(3 << 20)
+#define SDE_POISON		(1 << 19)
+/* 18 reserved */
+#define SDE_FDI_RXB		(1 << 17)
+#define SDE_FDI_RXA		(1 << 16)
+#define SDE_FDI_MASK		(3 << 16)
+#define SDE_AUXD		(1 << 15)
+#define SDE_AUXC		(1 << 14)
+#define SDE_AUXB		(1 << 13)
+#define SDE_AUX_MASK		(7 << 13)
+/* 12 reserved */
 #define SDE_CRT_HOTPLUG         (1 << 11)
 #define SDE_PORTD_HOTPLUG       (1 << 10)
 #define SDE_PORTC_HOTPLUG       (1 << 9)
 #define SDE_PORTB_HOTPLUG       (1 << 8)
 #define SDE_SDVOB_HOTPLUG       (1 << 6)
 #define SDE_HOTPLUG_MASK	(0xf << 8)
+#define SDE_TRANSB_CRC_DONE	(1 << 5)
+#define SDE_TRANSB_CRC_ERR	(1 << 4)
+#define SDE_TRANSB_FIFO_UNDER	(1 << 3)
+#define SDE_TRANSA_CRC_DONE	(1 << 2)
+#define SDE_TRANSA_CRC_ERR	(1 << 1)
+#define SDE_TRANSA_FIFO_UNDER	(1 << 0)
+#define SDE_TRANS_MASK		(0x3f)
 /* CPT */
 #define SDE_CRT_HOTPLUG_CPT	(1 << 19)
 #define SDE_PORTD_HOTPLUG_CPT	(1 << 23)
@ -3174,10 +3253,11 @@
 #define  EDP_LINK_TRAIN_600MV_3_5DB_SNB_A	(0x01<<22)
 #define  EDP_LINK_TRAIN_800MV_0DB_SNB_A		(0x0<<22)
 /* SNB B-stepping */
-#define  EDP_LINK_TRAIN_400MV_0DB_SNB_B		(0x0<<22)
-#define  EDP_LINK_TRAIN_400MV_6DB_SNB_B		(0x3a<<22)
-#define  EDP_LINK_TRAIN_600MV_3_5DB_SNB_B	(0x39<<22)
-#define  EDP_LINK_TRAIN_800MV_0DB_SNB_B		(0x38<<22)
+#define  EDP_LINK_TRAIN_400_600MV_0DB_SNB_B	(0x0<<22)
+#define  EDP_LINK_TRAIN_400MV_3_5DB_SNB_B	(0x1<<22)
+#define  EDP_LINK_TRAIN_400_600MV_6DB_SNB_B	(0x3a<<22)
+#define  EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B	(0x39<<22)
+#define  EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B	(0x38<<22)
 #define  EDP_LINK_TRAIN_VOL_EMP_MASK_SNB	(0x3f<<22)

 #define  FORCEWAKE				0xA18C
@ -3239,6 +3319,7 @@

 #define GEN6_PCODE_MAILBOX			0x138124
 #define   GEN6_PCODE_READY			(1<<31)
+#define   GEN6_READ_OC_PARAMS			0xc
 #define   GEN6_PCODE_WRITE_MIN_FREQ_TABLE	0x9
 #define GEN6_PCODE_DATA				0x138128

--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@ -740,7 +740,7 @@ void i915_restore_display(struct drm_device *dev)
 		I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
 		I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
 		I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL);
-		I915_WRITE(MCHBAR_RENDER_STANDBY,
+		I915_WRITE(RSTDBYCTL,
 			   dev_priv->saveMCHBAR_RENDER_STANDBY);
 	} else {
 		I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
@ -811,7 +811,7 @@ int i915_save_state(struct drm_device *dev)
 		dev_priv->saveFDI_RXA_IMR = I915_READ(FDI_RXA_IMR);
 		dev_priv->saveFDI_RXB_IMR = I915_READ(FDI_RXB_IMR);
 		dev_priv->saveMCHBAR_RENDER_STANDBY =
-			I915_READ(MCHBAR_RENDER_STANDBY);
+			I915_READ(RSTDBYCTL);
 	} else {
 		dev_priv->saveIER = I915_READ(IER);
 		dev_priv->saveIMR = I915_READ(IMR);
@ -822,10 +822,6 @@ int i915_save_state(struct drm_device *dev)
 	if (IS_GEN6(dev))
 		gen6_disable_rps(dev);

-	/* XXX disabling the clock gating breaks suspend on gm45
-	intel_disable_clock_gating(dev);
-	 */
-
 	/* Cache mode state */
 	dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);

--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@ -30,6 +30,7 @@
 #include "drm.h"
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
+#include "drm_edid.h"
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
@ -287,8 +288,9 @@ static bool intel_crt_ddc_probe(struct drm_i915_private *dev_priv, int ddc_bus)
 	return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
 }

-static bool intel_crt_detect_ddc(struct intel_crt *crt)
+static bool intel_crt_detect_ddc(struct drm_connector *connector)
 {
+	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;

 	/* CRT should always be at 0, but check anyway */
@ -301,9 +303,27 @@ static bool intel_crt_detect_ddc(struct intel_crt *crt)
 	}

 	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
+		struct edid *edid;
+		bool is_digital = false;
+
+		edid = drm_get_edid(connector,
+			&dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+		/*
+		 * This may be a DVI-I connector with a shared DDC
+		 * link between analog and digital outputs, so we
+		 * have to check the EDID input spec of the attached device.
+		 */
+		if (edid != NULL) {
+			is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
+			connector->display_info.raw_edid = NULL;
+			kfree(edid);
+		}
+
+		if (!is_digital) {
 			DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
 			return true;
 		}
+	}

 	return false;
 }
@ -458,7 +478,7 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 		}
 	}

-	if (intel_crt_detect_ddc(crt))
+	if (intel_crt_detect_ddc(connector))
 		return connector_status_connected;

 	if (!force)
@ -472,7 +492,7 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 		crtc = intel_get_load_detect_pipe(&crt->base, connector,
 						  NULL, &dpms_mode);
 		if (crtc) {
-			if (intel_crt_detect_ddc(crt))
+			if (intel_crt_detect_ddc(connector))
 				status = connector_status_connected;
 			else
 				status = intel_crt_load_detect(crtc, crt);
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@ -3418,15 +3418,16 @@ static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused,
 static bool ironlake_compute_wm0(struct drm_device *dev,
 				 int pipe,
 				 const struct intel_watermark_params *display,
-				 int display_latency,
+				 int display_latency_ns,
 				 const struct intel_watermark_params *cursor,
-				 int cursor_latency,
+				 int cursor_latency_ns,
 				 int *plane_wm,
 				 int *cursor_wm)
 {
 	struct drm_crtc *crtc;
-	int htotal, hdisplay, clock, pixel_size = 0;
-	int line_time_us, line_count, entries;
+	int htotal, hdisplay, clock, pixel_size;
+	int line_time_us, line_count;
+	int entries, tlb_miss;

 	crtc = intel_get_crtc_for_pipe(dev, pipe);
 	if (crtc->fb == NULL || !crtc->enabled)
@ -3438,7 +3439,10 @@ static bool ironlake_compute_wm0(struct drm_device *dev,
 	pixel_size = crtc->fb->bits_per_pixel / 8;

 	/* Use the small buffer method to calculate plane watermark */
-	entries = ((clock * pixel_size / 1000) * display_latency * 100) / 1000;
+	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
+	tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
+	if (tlb_miss > 0)
+		entries += tlb_miss;
 	entries = DIV_ROUND_UP(entries, display->cacheline_size);
 	*plane_wm = entries + display->guard_size;
 	if (*plane_wm > (int)display->max_wm)
@ -3446,8 +3450,11 @@ static bool ironlake_compute_wm0(struct drm_device *dev,

 	/* Use the large buffer method to calculate cursor watermark */
 	line_time_us = ((htotal * 1000) / clock);
-	line_count = (cursor_latency * 100 / line_time_us + 1000) / 1000;
+	line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
 	entries = line_count * 64 * pixel_size;
+	tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
+	if (tlb_miss > 0)
+		entries += tlb_miss;
 	entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
 	*cursor_wm = entries + cursor->guard_size;
 	if (*cursor_wm > (int)cursor->max_wm)
@ -3456,14 +3463,109 @@ static bool ironlake_compute_wm0(struct drm_device *dev,
 	return true;
 }

+/*
+ * Check the wm result.
+ *
+ * If any calculated watermark values is larger than the maximum value that
+ * can be programmed into the associated watermark register, that watermark
+ * must be disabled.
+ */
+static bool ironlake_check_srwm(struct drm_device *dev, int level,
+				int fbc_wm, int display_wm, int cursor_wm,
+				const struct intel_watermark_params *display,
+				const struct intel_watermark_params *cursor)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
+		      " cursor %d\n", level, display_wm, fbc_wm, cursor_wm);
+
+	if (fbc_wm > SNB_FBC_MAX_SRWM) {
+		DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
+			      fbc_wm, SNB_FBC_MAX_SRWM, level);
+
+		/* fbc has it's own way to disable FBC WM */
+		I915_WRITE(DISP_ARB_CTL,
+			   I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
+		return false;
+	}
+
+	if (display_wm > display->max_wm) {
+		DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
+			      display_wm, SNB_DISPLAY_MAX_SRWM, level);
+		return false;
+	}
+
+	if (cursor_wm > cursor->max_wm) {
+		DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
+			      cursor_wm, SNB_CURSOR_MAX_SRWM, level);
+		return false;
+	}
+
+	if (!(fbc_wm || display_wm || cursor_wm)) {
+		DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
+		return false;
+	}
+
+	return true;
+}
+
+/*
+ * Compute watermark values of WM[1-3],
+ */
+static bool ironlake_compute_srwm(struct drm_device *dev, int level,
+				  int hdisplay, int htotal,
+				  int pixel_size, int clock, int latency_ns,
+				  const struct intel_watermark_params *display,
+				  const struct intel_watermark_params *cursor,
+				  int *fbc_wm, int *display_wm, int *cursor_wm)
+{
+
+	unsigned long line_time_us;
+	int line_count, line_size;
+	int small, large;
+	int entries;
+
+	if (!latency_ns) {
+		*fbc_wm = *display_wm = *cursor_wm = 0;
+		return false;
+	}
+
+	line_time_us = (htotal * 1000) / clock;
+	line_count = (latency_ns / line_time_us + 1000) / 1000;
+	line_size = hdisplay * pixel_size;
+
+	/* Use the minimum of the small and large buffer method for primary */
+	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
+	large = line_count * line_size;
+
+	entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
+	*display_wm = entries + display->guard_size;
+
+	/*
+	 * Spec says:
+	 * FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
+	 */
+	*fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2;
+
+	/* calculate the self-refresh watermark for display cursor */
+	entries = line_count * pixel_size * 64;
+	entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
+	*cursor_wm = entries + cursor->guard_size;
+
+	return ironlake_check_srwm(dev, level,
+				   *fbc_wm, *display_wm, *cursor_wm,
+				   display, cursor);
+}
+
 static void ironlake_update_wm(struct drm_device *dev,
 			       int planea_clock, int planeb_clock,
-			       int sr_hdisplay, int sr_htotal,
+			       int hdisplay, int htotal,
 			       int pixel_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int plane_wm, cursor_wm, enabled;
-	int tmp;
+	int fbc_wm, plane_wm, cursor_wm, enabled;
+	int clock;

 	enabled = 0;
 	if (ironlake_compute_wm0(dev, 0,
@ -3498,152 +3600,49 @@ static void ironlake_update_wm(struct drm_device *dev,
 	 * Calculate and update the self-refresh watermark only when one
 	 * display plane is used.
 	 */
-	tmp = 0;
-	if (enabled == 1) {
-		unsigned long line_time_us;
-		int small, large, plane_fbc;
-		int sr_clock, entries;
-		int line_count, line_size;
-		/* Read the self-refresh latency. The unit is 0.5us */
-		int ilk_sr_latency = I915_READ(MLTR_ILK) & ILK_SRLT_MASK;
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);

-		sr_clock = planea_clock ? planea_clock : planeb_clock;
-		line_time_us = (sr_htotal * 1000) / sr_clock;
+	if (enabled != 1)
+		return;

-		/* Use ns/us then divide to preserve precision */
-		line_count = ((ilk_sr_latency * 500) / line_time_us + 1000)
-			/ 1000;
-		line_size = sr_hdisplay * pixel_size;
+	clock = planea_clock ? planea_clock : planeb_clock;

-		/* Use the minimum of the small and large buffer method for primary */
-		small = ((sr_clock * pixel_size / 1000) * (ilk_sr_latency * 500)) / 1000;
-		large = line_count * line_size;
+	/* WM1 */
+	if (!ironlake_compute_srwm(dev, 1, hdisplay, htotal, pixel_size,
+				   clock, ILK_READ_WM1_LATENCY() * 500,
+				   &ironlake_display_srwm_info,
+				   &ironlake_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;

-		entries = DIV_ROUND_UP(min(small, large),
-				       ironlake_display_srwm_info.cacheline_size);
-
-		plane_fbc = entries * 64;
-		plane_fbc = DIV_ROUND_UP(plane_fbc, line_size);
-
-		plane_wm = entries + ironlake_display_srwm_info.guard_size;
-		if (plane_wm > (int)ironlake_display_srwm_info.max_wm)
-			plane_wm = ironlake_display_srwm_info.max_wm;
-
-		/* calculate the self-refresh watermark for display cursor */
-		entries = line_count * pixel_size * 64;
-		entries = DIV_ROUND_UP(entries,
-				       ironlake_cursor_srwm_info.cacheline_size);
-
-		cursor_wm = entries + ironlake_cursor_srwm_info.guard_size;
-		if (cursor_wm > (int)ironlake_cursor_srwm_info.max_wm)
-			cursor_wm = ironlake_cursor_srwm_info.max_wm;
-
-		/* configure watermark and enable self-refresh */
-		tmp = (WM1_LP_SR_EN |
-		       (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) |
-		       (plane_fbc << WM1_LP_FBC_SHIFT) |
+	I915_WRITE(WM1_LP_ILK,
+		   WM1_LP_SR_EN |
+		   (ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+
+	/* WM2 */
+	if (!ironlake_compute_srwm(dev, 2, hdisplay, htotal, pixel_size,
+				   clock, ILK_READ_WM2_LATENCY() * 500,
+				   &ironlake_display_srwm_info,
+				   &ironlake_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM2_LP_ILK,
+		   WM2_LP_EN |
+		   (ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
 		   (plane_wm << WM1_LP_SR_SHIFT) |
 		   cursor_wm);
-		DRM_DEBUG_KMS("self-refresh watermark: display plane %d, fbc lines %d,"
-			      " cursor %d\n", plane_wm, plane_fbc, cursor_wm);
-	}
-	I915_WRITE(WM1_LP_ILK, tmp);
-	/* XXX setup WM2 and WM3 */
-}

 	/*
- * Check the wm result.
- *
- * If any calculated watermark values is larger than the maximum value that
- * can be programmed into the associated watermark register, that watermark
- * must be disabled.
- *
- * Also return true if all of those watermark values is 0, which is set by
- * sandybridge_compute_srwm, to indicate the latency is ZERO.
+	 * WM3 is unsupported on ILK, probably because we don't have latency
+	 * data for that power state
 	 */
-static bool sandybridge_check_srwm(struct drm_device *dev, int level,
-				   int fbc_wm, int display_wm, int cursor_wm)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
-		      " cursor %d\n", level, display_wm, fbc_wm, cursor_wm);
-
-	if (fbc_wm > SNB_FBC_MAX_SRWM) {
-		DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
-				fbc_wm, SNB_FBC_MAX_SRWM, level);
-
-		/* fbc has it's own way to disable FBC WM */
-		I915_WRITE(DISP_ARB_CTL,
-			   I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
-		return false;
-	}
-
-	if (display_wm > SNB_DISPLAY_MAX_SRWM) {
-		DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
-				display_wm, SNB_DISPLAY_MAX_SRWM, level);
-		return false;
-	}
-
-	if (cursor_wm > SNB_CURSOR_MAX_SRWM) {
-		DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
-				cursor_wm, SNB_CURSOR_MAX_SRWM, level);
-		return false;
-	}
-
-	if (!(fbc_wm || display_wm || cursor_wm)) {
-		DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
-		return false;
-	}
-
-	return true;
-}
-
-/*
- * Compute watermark values of WM[1-3],
- */
-static bool sandybridge_compute_srwm(struct drm_device *dev, int level,
-				     int hdisplay, int htotal, int pixel_size,
-				     int clock, int latency_ns, int *fbc_wm,
-				     int *display_wm, int *cursor_wm)
-{
-
-	unsigned long line_time_us;
-	int small, large;
-	int entries;
-	int line_count, line_size;
-
-	if (!latency_ns) {
-		*fbc_wm = *display_wm = *cursor_wm = 0;
-		return false;
-	}
-
-	line_time_us = (htotal * 1000) / clock;
-	line_count = (latency_ns / line_time_us + 1000) / 1000;
-	line_size = hdisplay * pixel_size;
-
-	/* Use the minimum of the small and large buffer method for primary */
-	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
-	large = line_count * line_size;
-
-	entries = DIV_ROUND_UP(min(small, large),
-				sandybridge_display_srwm_info.cacheline_size);
-	*display_wm = entries + sandybridge_display_srwm_info.guard_size;
-
-	/*
-	 * Spec said:
-	 * FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
-	 */
-	*fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2;
-
-	/* calculate the self-refresh watermark for display cursor */
-	entries = line_count * pixel_size * 64;
-	entries = DIV_ROUND_UP(entries,
-			       sandybridge_cursor_srwm_info.cacheline_size);
-	*cursor_wm = entries + sandybridge_cursor_srwm_info.guard_size;
-
-	return sandybridge_check_srwm(dev, level,
-				      *fbc_wm, *display_wm, *cursor_wm);
 }

 static void sandybridge_update_wm(struct drm_device *dev,
@ -3652,7 +3651,7 @@ static void sandybridge_update_wm(struct drm_device *dev,
 			       int pixel_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int latency = SNB_READ_WM0_LATENCY();
+	int latency = SNB_READ_WM0_LATENCY() * 100;	/* In unit 0.1us */
 	int fbc_wm, plane_wm, cursor_wm, enabled;
 	int clock;

@ -3701,8 +3700,10 @@ static void sandybridge_update_wm(struct drm_device *dev,
 	clock = planea_clock ? planea_clock : planeb_clock;

 	/* WM1 */
-	if (!sandybridge_compute_srwm(dev, 1, hdisplay, htotal, pixel_size,
+	if (!ironlake_compute_srwm(dev, 1, hdisplay, htotal, pixel_size,
 				   clock, SNB_READ_WM1_LATENCY() * 500,
+				   &sandybridge_display_srwm_info,
+				   &sandybridge_cursor_srwm_info,
 				   &fbc_wm, &plane_wm, &cursor_wm))
 		return;

@ -3714,9 +3715,11 @@ static void sandybridge_update_wm(struct drm_device *dev,
 		   cursor_wm);

 	/* WM2 */
-	if (!sandybridge_compute_srwm(dev, 2,
+	if (!ironlake_compute_srwm(dev, 2,
 				   hdisplay, htotal, pixel_size,
 				   clock, SNB_READ_WM2_LATENCY() * 500,
+				   &sandybridge_display_srwm_info,
+				   &sandybridge_cursor_srwm_info,
 				   &fbc_wm, &plane_wm, &cursor_wm))
 		return;

@ -3728,9 +3731,11 @@ static void sandybridge_update_wm(struct drm_device *dev,
 		   cursor_wm);

 	/* WM3 */
-	if (!sandybridge_compute_srwm(dev, 3,
+	if (!ironlake_compute_srwm(dev, 3,
 				   hdisplay, htotal, pixel_size,
 				   clock, SNB_READ_WM3_LATENCY() * 500,
+				   &sandybridge_display_srwm_info,
+				   &sandybridge_cursor_srwm_info,
 				   &fbc_wm, &plane_wm, &cursor_wm))
 		return;

@ -3951,7 +3956,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		int lane = 0, link_bw, bpp;
 		/* CPU eDP doesn't require FDI link, so just set DP M/N
 		   according to current link config */
-		if (has_edp_encoder && !intel_encoder_is_pch_edp(&encoder->base)) {
+		if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
 			target_clock = mode->clock;
 			intel_edp_link_config(has_edp_encoder,
 					      &lane, &link_bw);
@ -5038,8 +5043,8 @@ static void intel_increase_pllclock(struct drm_crtc *crtc)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
-	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
-	int dpll = I915_READ(dpll_reg);
+	int dpll_reg = DPLL(pipe);
+	int dpll;

 	if (HAS_PCH_SPLIT(dev))
 		return;
@ -5047,17 +5052,19 @@ static void intel_increase_pllclock(struct drm_crtc *crtc)
 	if (!dev_priv->lvds_downclock_avail)
 		return;

+	dpll = I915_READ(dpll_reg);
 	if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
 		DRM_DEBUG_DRIVER("upclocking LVDS\n");

 		/* Unlock panel regs */
-		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
-			   PANEL_UNLOCK_REGS);
+		I915_WRITE(PP_CONTROL,
+			   I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);

 		dpll &= ~DISPLAY_RATE_SELECT_FPA1;
 		I915_WRITE(dpll_reg, dpll);
-		dpll = I915_READ(dpll_reg);
+		POSTING_READ(dpll_reg);
 		intel_wait_for_vblank(dev, pipe);
+
 		dpll = I915_READ(dpll_reg);
 		if (dpll & DISPLAY_RATE_SELECT_FPA1)
 			DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
@ -5802,6 +5809,8 @@ static void intel_setup_outputs(struct drm_device *dev)
 		encoder->base.possible_clones =
 			intel_encoder_clones(dev, encoder->clone_mask);
 	}
+
+	intel_panel_setup_backlight(dev);
 }

 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
@ -6145,6 +6154,10 @@ void intel_init_emon(struct drm_device *dev)

 void gen6_enable_rps(struct drm_i915_private *dev_priv)
 {
+	u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+	u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
+	u32 pcu_mbox;
+	int cur_freq, min_freq, max_freq;
 	int i;

 	/* Here begins a magic sequence of register writes to enable
@ -6216,6 +6229,29 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 		     500))
 		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");

+	min_freq = (rp_state_cap & 0xff0000) >> 16;
+	max_freq = rp_state_cap & 0xff;
+	cur_freq = (gt_perf_status & 0xff00) >> 8;
+
+	/* Check for overclock support */
+	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
+		     500))
+		DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
+	I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS);
+	pcu_mbox = I915_READ(GEN6_PCODE_DATA);
+	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
+		     500))
+		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
+	if (pcu_mbox & (1<<31)) { /* OC supported */
+		max_freq = pcu_mbox & 0xff;
+		DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 100);
+	}
+
+	/* In units of 100MHz */
+	dev_priv->max_delay = max_freq;
+	dev_priv->min_delay = min_freq;
+	dev_priv->cur_delay = cur_freq;
+
 	/* requires MSI enabled */
 	I915_WRITE(GEN6_PMIER,
 		   GEN6_PM_MBOX_EVENT |
@ -6386,42 +6422,6 @@ void intel_enable_clock_gating(struct drm_device *dev)
 	} else if (IS_I830(dev)) {
 		I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
 	}
-
-	/*
-	 * GPU can automatically power down the render unit if given a page
-	 * to save state.
-	 */
-	if (IS_IRONLAKE_M(dev) && 0) { /* XXX causes a failure during suspend */
-		if (dev_priv->renderctx == NULL)
-			dev_priv->renderctx = intel_alloc_context_page(dev);
-		if (dev_priv->renderctx) {
-			struct drm_i915_gem_object *obj = dev_priv->renderctx;
-			if (BEGIN_LP_RING(4) == 0) {
-				OUT_RING(MI_SET_CONTEXT);
-				OUT_RING(obj->gtt_offset |
-					 MI_MM_SPACE_GTT |
-					 MI_SAVE_EXT_STATE_EN |
-					 MI_RESTORE_EXT_STATE_EN |
-					 MI_RESTORE_INHIBIT);
-				OUT_RING(MI_NOOP);
-				OUT_RING(MI_FLUSH);
-				ADVANCE_LP_RING();
-			}
-		} else
-			DRM_DEBUG_KMS("Failed to allocate render context."
-				       "Disable RC6\n");
-	}
-
-	if (IS_GEN4(dev) && IS_MOBILE(dev)) {
-		if (dev_priv->pwrctx == NULL)
-			dev_priv->pwrctx = intel_alloc_context_page(dev);
-		if (dev_priv->pwrctx) {
-			struct drm_i915_gem_object *obj = dev_priv->pwrctx;
-			I915_WRITE(PWRCTXA, obj->gtt_offset | PWRCTX_EN);
-			I915_WRITE(MCHBAR_RENDER_STANDBY,
-				   I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
-		}
-	}
 }

 void intel_disable_clock_gating(struct drm_device *dev)
@ -6451,6 +6451,57 @@ void intel_disable_clock_gating(struct drm_device *dev)
 	}
 }

+static void ironlake_disable_rc6(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
+	I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
+	wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON),
+		 10);
+	POSTING_READ(CCID);
+	I915_WRITE(PWRCTXA, 0);
+	POSTING_READ(PWRCTXA);
+	I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
+	POSTING_READ(RSTDBYCTL);
+	i915_gem_object_unpin(dev_priv->renderctx);
+	drm_gem_object_unreference(&dev_priv->renderctx->base);
+	dev_priv->renderctx = NULL;
+	i915_gem_object_unpin(dev_priv->pwrctx);
+	drm_gem_object_unreference(&dev_priv->pwrctx->base);
+	dev_priv->pwrctx = NULL;
+}
+
+void ironlake_enable_rc6(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	/*
+	 * GPU can automatically power down the render unit if given a page
+	 * to save state.
+	 */
+	ret = BEGIN_LP_RING(6);
+	if (ret) {
+		ironlake_disable_rc6(dev);
+		return;
+	}
+	OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
+	OUT_RING(MI_SET_CONTEXT);
+	OUT_RING(dev_priv->renderctx->gtt_offset |
+		 MI_MM_SPACE_GTT |
+		 MI_SAVE_EXT_STATE_EN |
+		 MI_RESTORE_EXT_STATE_EN |
+		 MI_RESTORE_INHIBIT);
+	OUT_RING(MI_SUSPEND_FLUSH);
+	OUT_RING(MI_NOOP);
+	OUT_RING(MI_FLUSH);
+	ADVANCE_LP_RING();
+
+	I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
+	I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
+}
+
 /* Set up chip specific display functions */
 static void intel_init_display(struct drm_device *dev)
 {
@ -6665,12 +6716,7 @@ void intel_modeset_init(struct drm_device *dev)
 		dev->mode_config.max_width = 8192;
 		dev->mode_config.max_height = 8192;
 	}
-
-	/* set memory base */
-	if (IS_GEN2(dev))
-		dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
-	else
-		dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2);
+	dev->mode_config.fb_base = dev->agp->base;

 	if (IS_MOBILE(dev) || !IS_GEN2(dev))
 		dev_priv->num_pipe = 2;
@ -6698,6 +6744,21 @@ void intel_modeset_init(struct drm_device *dev)
 	if (IS_GEN6(dev))
 		gen6_enable_rps(dev_priv);

+	if (IS_IRONLAKE_M(dev)) {
+		dev_priv->renderctx = intel_alloc_context_page(dev);
+		if (!dev_priv->renderctx)
+			goto skip_rc6;
+		dev_priv->pwrctx = intel_alloc_context_page(dev);
+		if (!dev_priv->pwrctx) {
+			i915_gem_object_unpin(dev_priv->renderctx);
+			drm_gem_object_unreference(&dev_priv->renderctx->base);
+			dev_priv->renderctx = NULL;
+			goto skip_rc6;
+		}
+		ironlake_enable_rc6(dev);
+	}
+
+skip_rc6:
 	INIT_WORK(&dev_priv->idle_work, intel_idle_update);
 	setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
 		    (unsigned long)dev);
@ -6734,7 +6795,8 @@ void intel_modeset_cleanup(struct drm_device *dev)
 	if (IS_GEN6(dev))
 		gen6_disable_rps(dev);

-	intel_disable_clock_gating(dev);
+	if (IS_IRONLAKE_M(dev))
+		ironlake_disable_rc6(dev);

 	mutex_unlock(&dev->struct_mutex);

--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@ -1153,18 +1153,27 @@ intel_dp_signal_levels(uint8_t train_set, int lane_count)
 static uint32_t
 intel_gen6_edp_signal_levels(uint8_t train_set)
 {
-	switch (train_set & (DP_TRAIN_VOLTAGE_SWING_MASK|DP_TRAIN_PRE_EMPHASIS_MASK)) {
+	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+					 DP_TRAIN_PRE_EMPHASIS_MASK);
+	switch (signal_levels) {
 	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
-		return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B;
 	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
-		return EDP_LINK_TRAIN_400MV_6DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
+		return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B;
 	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
-		return EDP_LINK_TRAIN_600MV_3_5DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B;
 	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
-		return EDP_LINK_TRAIN_800MV_0DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B;
 	default:
-		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level\n");
-		return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
+		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
+			      "0x%x\n", signal_levels);
+		return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
 	}
 }

@ -1334,17 +1343,24 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dp->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	bool channel_eq = false;
-	int tries;
+	int tries, cr_tries;
 	u32 reg;
 	uint32_t DP = intel_dp->DP;

 	/* channel equalization */
 	tries = 0;
+	cr_tries = 0;
 	channel_eq = false;
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
 		uint32_t    signal_levels;

+		if (cr_tries > 5) {
+			DRM_ERROR("failed to train DP, aborting\n");
+			intel_dp_link_down(intel_dp);
+			break;
+		}
+
 		if (IS_GEN6(dev) && is_edp(intel_dp)) {
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
@ -1367,14 +1383,26 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 		if (!intel_dp_get_link_status(intel_dp))
 			break;

+		/* Make sure clock is still ok */
+		if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+			intel_dp_start_link_train(intel_dp);
+			cr_tries++;
+			continue;
+		}
+
 		if (intel_channel_eq_ok(intel_dp)) {
 			channel_eq = true;
 			break;
 		}

-		/* Try 5 times */
-		if (tries > 5)
-			break;
+		/* Try 5 times, then try clock recovery if that fails */
+		if (tries > 5) {
+			intel_dp_link_down(intel_dp);
+			intel_dp_start_link_train(intel_dp);
+			tries = 0;
+			cr_tries++;
+			continue;
+		}

 		/* Compute new intel_dp->train_set as requested by target */
 		intel_get_adjust_train(intel_dp);
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@ -257,6 +257,9 @@ extern void intel_pch_panel_fitting(struct drm_device *dev,
 extern u32 intel_panel_get_max_backlight(struct drm_device *dev);
 extern u32 intel_panel_get_backlight(struct drm_device *dev);
 extern void intel_panel_set_backlight(struct drm_device *dev, u32 level);
+extern void intel_panel_setup_backlight(struct drm_device *dev);
+extern void intel_panel_enable_backlight(struct drm_device *dev);
+extern void intel_panel_disable_backlight(struct drm_device *dev);

 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
 extern void intel_encoder_prepare (struct drm_encoder *encoder);
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@ -62,6 +62,7 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 			  struct drm_fb_helper_surface_size *sizes)
 {
 	struct drm_device *dev = ifbdev->helper.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct fb_info *info;
 	struct drm_framebuffer *fb;
 	struct drm_mode_fb_cmd mode_cmd;
@ -77,7 +78,7 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 	mode_cmd.height = sizes->surface_height;

 	mode_cmd.bpp = sizes->surface_bpp;
-	mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 1) / 8), 64);
+	mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 7) / 8), 64);
 	mode_cmd.depth = sizes->surface_depth;

 	size = mode_cmd.pitch * mode_cmd.height;
@ -120,6 +121,11 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 	info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
 	info->fbops = &intelfb_ops;

+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret) {
+		ret = -ENOMEM;
+		goto out_unpin;
+	}
 	/* setup aperture base/size for vesafb takeover */
 	info->apertures = alloc_apertures(1);
 	if (!info->apertures) {
@ -127,10 +133,8 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 		goto out_unpin;
 	}
 	info->apertures->ranges[0].base = dev->mode_config.fb_base;
-	if (!IS_GEN2(dev))
-		info->apertures->ranges[0].size = pci_resource_len(dev->pdev, 2);
-	else
-		info->apertures->ranges[0].size = pci_resource_len(dev->pdev, 0);
+	info->apertures->ranges[0].size =
+		dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;

 	info->fix.smem_start = dev->mode_config.fb_base + obj->gtt_offset;
 	info->fix.smem_len = size;
@ -140,12 +144,6 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
 		ret = -ENOSPC;
 		goto out_unpin;
 	}
-
-	ret = fb_alloc_cmap(&info->cmap, 256, 0);
-	if (ret) {
-		ret = -ENOMEM;
-		goto out_unpin;
-	}
 	info->screen_size = size;

 //	memset(info->screen_base, 0, size);
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@ -106,7 +106,7 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds)
 	I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
 	POSTING_READ(lvds_reg);

-	intel_panel_set_backlight(dev, dev_priv->backlight_level);
+	intel_panel_enable_backlight(dev);
 }

 static void intel_lvds_disable(struct intel_lvds *intel_lvds)
@ -123,8 +123,7 @@ static void intel_lvds_disable(struct intel_lvds *intel_lvds)
 		lvds_reg = LVDS;
 	}

-	dev_priv->backlight_level = intel_panel_get_backlight(dev);
-	intel_panel_set_backlight(dev, 0);
+	intel_panel_disable_backlight(dev);

 	I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);

@ -375,6 +374,10 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 	}

 out:
+	if ((pfit_control & PFIT_ENABLE) == 0) {
+		pfit_control = 0;
+		pfit_pgm_ratios = 0;
+	}
 	if (pfit_control != intel_lvds->pfit_control ||
 	    pfit_pgm_ratios != intel_lvds->pfit_pgm_ratios) {
 		intel_lvds->pfit_control = pfit_control;
@ -398,8 +401,6 @@ static void intel_lvds_prepare(struct drm_encoder *encoder)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);

-	dev_priv->backlight_level = intel_panel_get_backlight(dev);
-
 	/* We try to do the minimum that is necessary in order to unlock
 	 * the registers for mode setting.
 	 *
@ -430,9 +431,6 @@ static void intel_lvds_commit(struct drm_encoder *encoder)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);

-	if (dev_priv->backlight_level == 0)
-		dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
-
 	/* Undo any unlocking done in prepare to prevent accidental
 	 * adjustment of the registers.
 	 */
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@ -250,3 +250,34 @@ void intel_panel_set_backlight(struct drm_device *dev, u32 level)
 		tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK;
 	I915_WRITE(BLC_PWM_CTL, tmp | level);
 }
+
+void intel_panel_disable_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->backlight_enabled) {
+		dev_priv->backlight_level = intel_panel_get_backlight(dev);
+		dev_priv->backlight_enabled = false;
+	}
+
+	intel_panel_set_backlight(dev, 0);
+}
+
+void intel_panel_enable_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->backlight_level == 0)
+		dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
+
+	intel_panel_set_backlight(dev, dev_priv->backlight_level);
+	dev_priv->backlight_enabled = true;
+}
+
+void intel_panel_setup_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
+	dev_priv->backlight_enabled = dev_priv->backlight_level != 0;
+}
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@ -48,7 +48,7 @@ static u32 i915_gem_get_seqno(struct drm_device *dev)
 	return seqno;
 }

-static void
+static int
 render_ring_flush(struct intel_ring_buffer *ring,
 		  u32	invalidate_domains,
 		  u32	flush_domains)
@ -56,6 +56,7 @@ render_ring_flush(struct intel_ring_buffer *ring,
 	struct drm_device *dev = ring->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 cmd;
+	int ret;

 #if WATCH_EXEC
 	DRM_INFO("%s: invalidate %08x flush %08x\n", __func__,
@ -116,12 +117,16 @@ render_ring_flush(struct intel_ring_buffer *ring,
 #if WATCH_EXEC
 		DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd);
 #endif
-		if (intel_ring_begin(ring, 2) == 0) {
+		ret = intel_ring_begin(ring, 2);
+		if (ret)
+			return ret;
+
 		intel_ring_emit(ring, cmd);
 		intel_ring_emit(ring, MI_NOOP);
 		intel_ring_advance(ring);
 	}
-	}
+
+	return 0;
 }

 static void ring_write_tail(struct intel_ring_buffer *ring,
@ -480,26 +485,56 @@ pc_render_get_seqno(struct intel_ring_buffer *ring)
 	return pc->cpu_page[0];
 }

+static void
+ironlake_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	dev_priv->gt_irq_mask &= ~mask;
+	I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+	POSTING_READ(GTIMR);
+}
+
+static void
+ironlake_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	dev_priv->gt_irq_mask |= mask;
+	I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+	POSTING_READ(GTIMR);
+}
+
+static void
+i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	dev_priv->irq_mask &= ~mask;
+	I915_WRITE(IMR, dev_priv->irq_mask);
+	POSTING_READ(IMR);
+}
+
+static void
+i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	dev_priv->irq_mask |= mask;
+	I915_WRITE(IMR, dev_priv->irq_mask);
+	POSTING_READ(IMR);
+}
+
 static bool
 render_ring_get_irq(struct intel_ring_buffer *ring)
 {
 	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;

 	if (!dev->irq_enabled)
 		return false;

-	if (atomic_inc_return(&ring->irq_refcount) == 1) {
-		drm_i915_private_t *dev_priv = dev->dev_private;
-		unsigned long irqflags;
-
-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock(&ring->irq_lock);
+	if (ring->irq_refcount++ == 0) {
 		if (HAS_PCH_SPLIT(dev))
-			ironlake_enable_graphics_irq(dev_priv,
+			ironlake_enable_irq(dev_priv,
 					    GT_PIPE_NOTIFY | GT_USER_INTERRUPT);
 		else
 			i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 	}
+	spin_unlock(&ring->irq_lock);

 	return true;
 }
@ -508,20 +543,18 @@ static void
 render_ring_put_irq(struct intel_ring_buffer *ring)
 {
 	struct drm_device *dev = ring->dev;
-
-	if (atomic_dec_and_test(&ring->irq_refcount)) {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-		unsigned long irqflags;

-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock(&ring->irq_lock);
+	if (--ring->irq_refcount == 0) {
 		if (HAS_PCH_SPLIT(dev))
-			ironlake_disable_graphics_irq(dev_priv,
+			ironlake_disable_irq(dev_priv,
 					     GT_USER_INTERRUPT |
 					     GT_PIPE_NOTIFY);
 		else
 			i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 	}
+	spin_unlock(&ring->irq_lock);
 }

 void intel_ring_setup_status_page(struct intel_ring_buffer *ring)
@ -534,19 +567,24 @@ void intel_ring_setup_status_page(struct intel_ring_buffer *ring)
 	POSTING_READ(mmio);
 }

-static void
+static int
 bsd_ring_flush(struct intel_ring_buffer *ring,
 	       u32     invalidate_domains,
 	       u32     flush_domains)
 {
-	if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
-		return;
+	int ret;
+
+	if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
+		return 0;
+
+	ret = intel_ring_begin(ring, 2);
+	if (ret)
+		return ret;

-	if (intel_ring_begin(ring, 2) == 0) {
 	intel_ring_emit(ring, MI_FLUSH);
 	intel_ring_emit(ring, MI_NOOP);
 	intel_ring_advance(ring);
-	}
+	return 0;
 }

 static int
@ -577,18 +615,15 @@ static bool
 ring_get_irq(struct intel_ring_buffer *ring, u32 flag)
 {
 	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;

 	if (!dev->irq_enabled)
 	       return false;

-	if (atomic_inc_return(&ring->irq_refcount) == 1) {
-		drm_i915_private_t *dev_priv = dev->dev_private;
-		unsigned long irqflags;
-
-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
-		ironlake_enable_graphics_irq(dev_priv, flag);
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
-	}
+	spin_lock(&ring->irq_lock);
+	if (ring->irq_refcount++ == 0)
+		ironlake_enable_irq(dev_priv, flag);
+	spin_unlock(&ring->irq_lock);

 	return true;
 }
@ -597,15 +632,47 @@ static void
 ring_put_irq(struct intel_ring_buffer *ring, u32 flag)
 {
 	struct drm_device *dev = ring->dev;
-
-	if (atomic_dec_and_test(&ring->irq_refcount)) {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-		unsigned long irqflags;

-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
-		ironlake_disable_graphics_irq(dev_priv, flag);
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_lock(&ring->irq_lock);
+	if (--ring->irq_refcount == 0)
+		ironlake_disable_irq(dev_priv, flag);
+	spin_unlock(&ring->irq_lock);
 }
+
+static bool
+gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!dev->irq_enabled)
+	       return false;
+
+	spin_lock(&ring->irq_lock);
+	if (ring->irq_refcount++ == 0) {
+		ring->irq_mask &= ~rflag;
+		I915_WRITE_IMR(ring, ring->irq_mask);
+		ironlake_enable_irq(dev_priv, gflag);
+	}
+	spin_unlock(&ring->irq_lock);
+
+	return true;
+}
+
+static void
+gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	spin_lock(&ring->irq_lock);
+	if (--ring->irq_refcount == 0) {
+		ring->irq_mask |= rflag;
+		I915_WRITE_IMR(ring, ring->irq_mask);
+		ironlake_disable_irq(dev_priv, gflag);
+	}
+	spin_unlock(&ring->irq_lock);
 }

 static bool
@ -748,6 +815,9 @@ int intel_init_ring_buffer(struct drm_device *dev,
 	INIT_LIST_HEAD(&ring->request_list);
 	INIT_LIST_HEAD(&ring->gpu_write_list);

+	spin_lock_init(&ring->irq_lock);
+	ring->irq_mask = ~0;
+
 	if (I915_NEED_GFX_HWS(dev)) {
 		ret = init_status_page(ring);
 		if (ret)
@ -785,6 +855,14 @@ int intel_init_ring_buffer(struct drm_device *dev,
 	if (ret)
 		goto err_unmap;

+	/* Workaround an erratum on the i830 which causes a hang if
+	 * the TAIL pointer points to within the last 2 cachelines
+	 * of the buffer.
+	 */
+	ring->effective_size = ring->size;
+	if (IS_I830(ring->dev))
+		ring->effective_size -= 128;
+
 	return 0;

 err_unmap:
@ -827,8 +905,7 @@ void intel_cleanup_ring_buffer(struct intel_ring_buffer *ring)
 static int intel_wrap_ring_buffer(struct intel_ring_buffer *ring)
 {
 	unsigned int *virt;
-	int rem;
-	rem = ring->size - ring->tail;
+	int rem = ring->size - ring->tail;

 	if (ring->space < rem) {
 		int ret = intel_wait_ring_buffer(ring, rem);
@ -895,7 +972,7 @@ int intel_ring_begin(struct intel_ring_buffer *ring,
 	int n = 4*num_dwords;
 	int ret;

-	if (unlikely(ring->tail + n > ring->size)) {
+	if (unlikely(ring->tail + n > ring->effective_size)) {
 		ret = intel_wrap_ring_buffer(ring);
 		if (unlikely(ret))
 			return ret;
@ -973,20 +1050,25 @@ static void gen6_bsd_ring_write_tail(struct intel_ring_buffer *ring,
 	       GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE);
 }

-static void gen6_ring_flush(struct intel_ring_buffer *ring,
+static int gen6_ring_flush(struct intel_ring_buffer *ring,
 			   u32 invalidate_domains,
 			   u32 flush_domains)
 {
-	if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
-		return;
+	int ret;
+
+	if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
+		return 0;
+
+	ret = intel_ring_begin(ring, 4);
+	if (ret)
+		return ret;

-	if (intel_ring_begin(ring, 4) == 0) {
 	intel_ring_emit(ring, MI_FLUSH_DW);
 	intel_ring_emit(ring, 0);
 	intel_ring_emit(ring, 0);
 	intel_ring_emit(ring, 0);
 	intel_ring_advance(ring);
-	}
+	return 0;
 }

 static int
@ -1007,16 +1089,36 @@ gen6_ring_dispatch_execbuffer(struct intel_ring_buffer *ring,
       return 0;
 }

+static bool
+gen6_render_ring_get_irq(struct intel_ring_buffer *ring)
+{
+	return gen6_ring_get_irq(ring,
+				 GT_USER_INTERRUPT,
+				 GEN6_RENDER_USER_INTERRUPT);
+}
+
+static void
+gen6_render_ring_put_irq(struct intel_ring_buffer *ring)
+{
+	return gen6_ring_put_irq(ring,
+				 GT_USER_INTERRUPT,
+				 GEN6_RENDER_USER_INTERRUPT);
+}
+
 static bool
 gen6_bsd_ring_get_irq(struct intel_ring_buffer *ring)
 {
-	return ring_get_irq(ring, GT_GEN6_BSD_USER_INTERRUPT);
+	return gen6_ring_get_irq(ring,
+				 GT_GEN6_BSD_USER_INTERRUPT,
+				 GEN6_BSD_USER_INTERRUPT);
 }

 static void
 gen6_bsd_ring_put_irq(struct intel_ring_buffer *ring)
 {
-	ring_put_irq(ring, GT_GEN6_BSD_USER_INTERRUPT);
+	return gen6_ring_put_irq(ring,
+				 GT_GEN6_BSD_USER_INTERRUPT,
+				 GEN6_BSD_USER_INTERRUPT);
 }

 /* ring buffer for Video Codec for Gen6+ */
@ -1040,13 +1142,17 @@ static const struct intel_ring_buffer gen6_bsd_ring = {
 static bool
 blt_ring_get_irq(struct intel_ring_buffer *ring)
 {
-	return ring_get_irq(ring, GT_BLT_USER_INTERRUPT);
+	return gen6_ring_get_irq(ring,
+				 GT_BLT_USER_INTERRUPT,
+				 GEN6_BLITTER_USER_INTERRUPT);
 }

 static void
 blt_ring_put_irq(struct intel_ring_buffer *ring)
 {
-	ring_put_irq(ring, GT_BLT_USER_INTERRUPT);
+	gen6_ring_put_irq(ring,
+			  GT_BLT_USER_INTERRUPT,
+			  GEN6_BLITTER_USER_INTERRUPT);
 }


@ -1115,20 +1221,25 @@ static int blt_ring_begin(struct intel_ring_buffer *ring,
 		return intel_ring_begin(ring, 4);
 }

-static void blt_ring_flush(struct intel_ring_buffer *ring,
+static int blt_ring_flush(struct intel_ring_buffer *ring,
 			   u32 invalidate_domains,
 			   u32 flush_domains)
 {
-	if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
-		return;
+	int ret;
+
+	if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
+		return 0;
+
+	ret = blt_ring_begin(ring, 4);
+	if (ret)
+		return ret;

-	if (blt_ring_begin(ring, 4) == 0) {
 	intel_ring_emit(ring, MI_FLUSH_DW);
 	intel_ring_emit(ring, 0);
 	intel_ring_emit(ring, 0);
 	intel_ring_emit(ring, 0);
 	intel_ring_advance(ring);
-	}
+	return 0;
 }

 static void blt_ring_cleanup(struct intel_ring_buffer *ring)
@ -1165,6 +1276,8 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 	*ring = render_ring;
 	if (INTEL_INFO(dev)->gen >= 6) {
 		ring->add_request = gen6_add_request;
+		ring->irq_get = gen6_render_ring_get_irq;
+		ring->irq_put = gen6_render_ring_put_irq;
 	} else if (IS_GEN5(dev)) {
 		ring->add_request = pc_render_add_request;
 		ring->get_seqno = pc_render_get_seqno;
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@ -16,21 +16,24 @@ struct  intel_hw_status_page {

 #define I915_RING_READ(reg) i915_safe_read(dev_priv, reg)

-#define I915_READ_TAIL(ring) I915_RING_READ(RING_TAIL(ring->mmio_base))
-#define I915_WRITE_TAIL(ring, val) I915_WRITE(RING_TAIL(ring->mmio_base), val)
+#define I915_READ_TAIL(ring) I915_RING_READ(RING_TAIL((ring)->mmio_base))
+#define I915_WRITE_TAIL(ring, val) I915_WRITE(RING_TAIL((ring)->mmio_base), val)

-#define I915_READ_START(ring) I915_RING_READ(RING_START(ring->mmio_base))
-#define I915_WRITE_START(ring, val) I915_WRITE(RING_START(ring->mmio_base), val)
+#define I915_READ_START(ring) I915_RING_READ(RING_START((ring)->mmio_base))
+#define I915_WRITE_START(ring, val) I915_WRITE(RING_START((ring)->mmio_base), val)

-#define I915_READ_HEAD(ring)  I915_RING_READ(RING_HEAD(ring->mmio_base))
-#define I915_WRITE_HEAD(ring, val) I915_WRITE(RING_HEAD(ring->mmio_base), val)
+#define I915_READ_HEAD(ring)  I915_RING_READ(RING_HEAD((ring)->mmio_base))
+#define I915_WRITE_HEAD(ring, val) I915_WRITE(RING_HEAD((ring)->mmio_base), val)

-#define I915_READ_CTL(ring) I915_RING_READ(RING_CTL(ring->mmio_base))
-#define I915_WRITE_CTL(ring, val) I915_WRITE(RING_CTL(ring->mmio_base), val)
+#define I915_READ_CTL(ring) I915_RING_READ(RING_CTL((ring)->mmio_base))
+#define I915_WRITE_CTL(ring, val) I915_WRITE(RING_CTL((ring)->mmio_base), val)

-#define I915_READ_NOPID(ring) I915_RING_READ(RING_NOPID(ring->mmio_base))
-#define I915_READ_SYNC_0(ring) I915_RING_READ(RING_SYNC_0(ring->mmio_base))
-#define I915_READ_SYNC_1(ring) I915_RING_READ(RING_SYNC_1(ring->mmio_base))
+#define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
+#define I915_READ_IMR(ring) I915_RING_READ(RING_IMR((ring)->mmio_base))
+
+#define I915_READ_NOPID(ring) I915_RING_READ(RING_NOPID((ring)->mmio_base))
+#define I915_READ_SYNC_0(ring) I915_RING_READ(RING_SYNC_0((ring)->mmio_base))
+#define I915_READ_SYNC_1(ring) I915_RING_READ(RING_SYNC_1((ring)->mmio_base))

 struct  intel_ring_buffer {
 	const char	*name;
@ -49,12 +52,15 @@ struct  intel_ring_buffer {
 	u32		tail;
 	int		space;
 	int		size;
+	int		effective_size;
 	struct intel_hw_status_page status_page;

+	spinlock_t	irq_lock;
+	u32		irq_refcount;
+	u32		irq_mask;
 	u32		irq_seqno;		/* last seq seem at irq time */
 	u32		waiting_seqno;
 	u32		sync_seqno[I915_NUM_RINGS-1];
-	atomic_t	irq_refcount;
 	bool __must_check (*irq_get)(struct intel_ring_buffer *ring);
 	void		(*irq_put)(struct intel_ring_buffer *ring);

@ -62,7 +68,7 @@ struct  intel_ring_buffer {

 	void		(*write_tail)(struct intel_ring_buffer *ring,
 				      u32 value);
-	void		(*flush)(struct intel_ring_buffer *ring,
+	int __must_check (*flush)(struct intel_ring_buffer *ring,
 				  u32	invalidate_domains,
 				  u32	flush_domains);
 	int		(*add_request)(struct intel_ring_buffer *ring,
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@ -1024,9 +1024,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 	if (!intel_sdvo_set_target_input(intel_sdvo))
 		return;

-	if (intel_sdvo->has_hdmi_monitor &&
-	    !intel_sdvo_set_avi_infoframe(intel_sdvo))
-		return;
+	if (intel_sdvo->has_hdmi_monitor) {
+		intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI);
+		intel_sdvo_set_colorimetry(intel_sdvo,
+					   SDVO_COLORIMETRY_RGB256);
+		intel_sdvo_set_avi_infoframe(intel_sdvo);
+	} else
+		intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_DVI);

 	if (intel_sdvo->is_tv &&
 	    !intel_sdvo_set_tv_format(intel_sdvo))
@ -1398,6 +1402,9 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)

 	intel_sdvo->attached_output = response;

+	intel_sdvo->has_hdmi_monitor = false;
+	intel_sdvo->has_hdmi_audio = false;
+
 	if ((intel_sdvo_connector->output_flag & response) == 0)
 		ret = connector_status_disconnected;
 	else if (response & SDVO_TMDS_MASK)
@ -1922,20 +1929,7 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
 static bool
 intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo, int device)
 {
-	int is_hdmi;
-
-	if (!intel_sdvo_check_supp_encode(intel_sdvo))
-		return false;
-
-	if (!intel_sdvo_set_target_output(intel_sdvo,
-					  device == 0 ? SDVO_OUTPUT_TMDS0 : SDVO_OUTPUT_TMDS1))
-		return false;
-
-	is_hdmi = 0;
-	if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ENCODE, &is_hdmi, 1))
-		return false;
-
-	return !!is_hdmi;
+	return intel_sdvo_check_supp_encode(intel_sdvo);
 }

 static u8
@ -2037,12 +2031,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 	connector->connector_type = DRM_MODE_CONNECTOR_DVID;

 	if (intel_sdvo_is_hdmi_connector(intel_sdvo, device)) {
-		/* enable hdmi encoding mode if supported */
-		intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI);
-		intel_sdvo_set_colorimetry(intel_sdvo,
-					   SDVO_COLORIMETRY_RGB256);
 		connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
-
 		intel_sdvo->is_hdmi = true;
 	}
 	intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@ -2963,6 +2963,7 @@ config TILE_NET
 config XEN_NETDEV_FRONTEND
 	tristate "Xen network device frontend driver"
 	depends on XEN
+	select XEN_XENBUS_FRONTEND
 	default y
 	help
 	  The network device frontend driver allows the kernel to
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@ -45,6 +45,7 @@ config XEN_PCIDEV_FRONTEND
        depends on PCI && X86 && XEN
        select HOTPLUG
        select PCI_XEN
+	select XEN_XENBUS_FRONTEND
        default y
        help
          The PCI device frontend driver allows the kernel to import arbitrary
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@ -29,6 +29,14 @@ config XEN_DEV_EVTCHN
 	  firing.
 	  If in doubt, say yes.

+config XEN_BACKEND
+	bool "Backend driver support"
+	depends on XEN_DOM0
+	default y
+	help
+	  Support for backend device drivers that provide I/O services
+	  to other virtual machines.
+
 config XENFS
 	tristate "Xen filesystem"
 	default y
@ -62,6 +70,9 @@ config XEN_SYS_HYPERVISOR
 	 virtual environment, /sys/hypervisor will still be present,
 	 but will have no xen contents.

+config XEN_XENBUS_FRONTEND
+       tristate
+
 config XEN_PLATFORM_PCI
 	tristate "xen platform pci device driver"
 	depends on XEN_PVHVM
--- a/drivers/xen/xenbus/Makefile
+++ b/drivers/xen/xenbus/Makefile
@ -5,3 +5,8 @@ xenbus-objs += xenbus_client.o
 xenbus-objs += xenbus_comms.o
 xenbus-objs += xenbus_xs.o
 xenbus-objs += xenbus_probe.o
+
+xenbus-be-objs-$(CONFIG_XEN_BACKEND) += xenbus_probe_backend.o
+xenbus-objs += $(xenbus-be-objs-y)
+
+obj-$(CONFIG_XEN_XENBUS_FRONTEND) += xenbus_probe_frontend.o
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@ -56,7 +56,6 @@
 #include <xen/events.h>
 #include <xen/page.h>

-#include <xen/platform_pci.h>
 #include <xen/hvm.h>

 #include "xenbus_comms.h"
@ -73,15 +72,6 @@ static unsigned long xen_store_mfn;

 static BLOCKING_NOTIFIER_HEAD(xenstore_chain);

-static void wait_for_devices(struct xenbus_driver *xendrv);
-
-static int xenbus_probe_frontend(const char *type, const char *name);
-
-static void xenbus_dev_shutdown(struct device *_dev);
-
-static int xenbus_dev_suspend(struct device *dev, pm_message_t state);
-static int xenbus_dev_resume(struct device *dev);
-
 /* If something in array of ids matches this device, return it. */
 static const struct xenbus_device_id *
 match_device(const struct xenbus_device_id *arr, struct xenbus_device *dev)
@ -102,34 +92,7 @@ int xenbus_match(struct device *_dev, struct device_driver *_drv)

 	return match_device(drv->ids, to_xenbus_device(_dev)) != NULL;
 }
-
-static int xenbus_uevent(struct device *_dev, struct kobj_uevent_env *env)
-{
-	struct xenbus_device *dev = to_xenbus_device(_dev);
-
-	if (add_uevent_var(env, "MODALIAS=xen:%s", dev->devicetype))
-		return -ENOMEM;
-
-	return 0;
-}
-
-/* device/<type>/<id> => <type>-<id> */
-static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename)
-{
-	nodename = strchr(nodename, '/');
-	if (!nodename || strlen(nodename + 1) >= XEN_BUS_ID_SIZE) {
-		printk(KERN_WARNING "XENBUS: bad frontend %s\n", nodename);
-		return -EINVAL;
-	}
-
-	strlcpy(bus_id, nodename + 1, XEN_BUS_ID_SIZE);
-	if (!strchr(bus_id, '/')) {
-		printk(KERN_WARNING "XENBUS: bus_id %s no slash\n", bus_id);
-		return -EINVAL;
-	}
-	*strchr(bus_id, '/') = '-';
-	return 0;
-}
+EXPORT_SYMBOL_GPL(xenbus_match);


 static void free_otherend_details(struct xenbus_device *dev)
@ -149,7 +112,30 @@ static void free_otherend_watch(struct xenbus_device *dev)
 }


-int read_otherend_details(struct xenbus_device *xendev,
+static int talk_to_otherend(struct xenbus_device *dev)
+{
+	struct xenbus_driver *drv = to_xenbus_driver(dev->dev.driver);
+
+	free_otherend_watch(dev);
+	free_otherend_details(dev);
+
+	return drv->read_otherend_details(dev);
+}
+
+
+
+static int watch_otherend(struct xenbus_device *dev)
+{
+	struct xen_bus_type *bus =
+		container_of(dev->dev.bus, struct xen_bus_type, bus);
+
+	return xenbus_watch_pathfmt(dev, &dev->otherend_watch,
+				    bus->otherend_changed,
+				    "%s/%s", dev->otherend, "state");
+}
+
+
+int xenbus_read_otherend_details(struct xenbus_device *xendev,
 				 char *id_node, char *path_node)
 {
 	int err = xenbus_gather(XBT_NIL, xendev->nodename,
@ -174,39 +160,11 @@ int read_otherend_details(struct xenbus_device *xendev,

 	return 0;
 }
+EXPORT_SYMBOL_GPL(xenbus_read_otherend_details);

-
-static int read_backend_details(struct xenbus_device *xendev)
-{
-	return read_otherend_details(xendev, "backend-id", "backend");
-}
-
-static struct device_attribute xenbus_dev_attrs[] = {
-	__ATTR_NULL
-};
-
-/* Bus type for frontend drivers. */
-static struct xen_bus_type xenbus_frontend = {
-	.root = "device",
-	.levels = 2, 		/* device/type/<id> */
-	.get_bus_id = frontend_bus_id,
-	.probe = xenbus_probe_frontend,
-	.bus = {
-		.name      = "xen",
-		.match     = xenbus_match,
-		.uevent    = xenbus_uevent,
-		.probe     = xenbus_dev_probe,
-		.remove    = xenbus_dev_remove,
-		.shutdown  = xenbus_dev_shutdown,
-		.dev_attrs = xenbus_dev_attrs,
-
-		.suspend   = xenbus_dev_suspend,
-		.resume    = xenbus_dev_resume,
-	},
-};
-
-static void otherend_changed(struct xenbus_watch *watch,
-			     const char **vec, unsigned int len)
+void xenbus_otherend_changed(struct xenbus_watch *watch,
+			     const char **vec, unsigned int len,
+			     int ignore_on_shutdown)
 {
 	struct xenbus_device *dev =
 		container_of(watch, struct xenbus_device, otherend_watch);
@ -234,11 +192,7 @@ static void otherend_changed(struct xenbus_watch *watch,
 	 * work that can fail e.g., when the rootfs is gone.
 	 */
 	if (system_state > SYSTEM_RUNNING) {
-		struct xen_bus_type *bus = bus;
-		bus = container_of(dev->dev.bus, struct xen_bus_type, bus);
-		/* If we're frontend, drive the state machine to Closed. */
-		/* This should cause the backend to release our resources. */
-		if ((bus == &xenbus_frontend) && (state == XenbusStateClosing))
+		if (ignore_on_shutdown && (state == XenbusStateClosing))
 			xenbus_frontend_closed(dev);
 		return;
 	}
@ -246,25 +200,7 @@ static void otherend_changed(struct xenbus_watch *watch,
 	if (drv->otherend_changed)
 		drv->otherend_changed(dev, state);
 }
-
-
-static int talk_to_otherend(struct xenbus_device *dev)
-{
-	struct xenbus_driver *drv = to_xenbus_driver(dev->dev.driver);
-
-	free_otherend_watch(dev);
-	free_otherend_details(dev);
-
-	return drv->read_otherend_details(dev);
-}
-
-
-static int watch_otherend(struct xenbus_device *dev)
-{
-	return xenbus_watch_pathfmt(dev, &dev->otherend_watch, otherend_changed,
-				    "%s/%s", dev->otherend, "state");
-}
-
+EXPORT_SYMBOL_GPL(xenbus_otherend_changed);

 int xenbus_dev_probe(struct device *_dev)
 {
@ -308,8 +244,9 @@ int xenbus_dev_probe(struct device *_dev)
 fail:
 	xenbus_dev_error(dev, err, "xenbus_dev_probe on %s", dev->nodename);
 	xenbus_switch_state(dev, XenbusStateClosed);
-	return -ENODEV;
+	return err;
 }
+EXPORT_SYMBOL_GPL(xenbus_dev_probe);

 int xenbus_dev_remove(struct device *_dev)
 {
@ -327,8 +264,9 @@ int xenbus_dev_remove(struct device *_dev)
 	xenbus_switch_state(dev, XenbusStateClosed);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(xenbus_dev_remove);

-static void xenbus_dev_shutdown(struct device *_dev)
+void xenbus_dev_shutdown(struct device *_dev)
 {
 	struct xenbus_device *dev = to_xenbus_device(_dev);
 	unsigned long timeout = 5*HZ;
@ -349,6 +287,7 @@ static void xenbus_dev_shutdown(struct device *_dev)
 out:
 	put_device(&dev->dev);
 }
+EXPORT_SYMBOL_GPL(xenbus_dev_shutdown);

 int xenbus_register_driver_common(struct xenbus_driver *drv,
 				  struct xen_bus_type *bus,
@ -362,25 +301,7 @@ int xenbus_register_driver_common(struct xenbus_driver *drv,

 	return driver_register(&drv->driver);
 }
-
-int __xenbus_register_frontend(struct xenbus_driver *drv,
-			       struct module *owner, const char *mod_name)
-{
-	int ret;
-
-	drv->read_otherend_details = read_backend_details;
-
-	ret = xenbus_register_driver_common(drv, &xenbus_frontend,
-					    owner, mod_name);
-	if (ret)
-		return ret;
-
-	/* If this driver is loaded as a module wait for devices to attach. */
-	wait_for_devices(drv);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(__xenbus_register_frontend);
+EXPORT_SYMBOL_GPL(xenbus_register_driver_common);

 void xenbus_unregister_driver(struct xenbus_driver *drv)
 {
@ -551,24 +472,7 @@ fail:
 	kfree(xendev);
 	return err;
 }
-
-/* device/<typename>/<name> */
-static int xenbus_probe_frontend(const char *type, const char *name)
-{
-	char *nodename;
-	int err;
-
-	nodename = kasprintf(GFP_KERNEL, "%s/%s/%s",
-			     xenbus_frontend.root, type, name);
-	if (!nodename)
-		return -ENOMEM;
-
-	DPRINTK("%s", nodename);
-
-	err = xenbus_probe_node(&xenbus_frontend, type, nodename);
-	kfree(nodename);
-	return err;
-}
+EXPORT_SYMBOL_GPL(xenbus_probe_node);

 static int xenbus_probe_device_type(struct xen_bus_type *bus, const char *type)
 {
@ -582,10 +486,11 @@ static int xenbus_probe_device_type(struct xen_bus_type *bus, const char *type)
 		return PTR_ERR(dir);

 	for (i = 0; i < dir_n; i++) {
-		err = bus->probe(type, dir[i]);
+		err = bus->probe(bus, type, dir[i]);
 		if (err)
 			break;
 	}
+
 	kfree(dir);
 	return err;
 }
@ -605,9 +510,11 @@ int xenbus_probe_devices(struct xen_bus_type *bus)
 		if (err)
 			break;
 	}
+
 	kfree(dir);
 	return err;
 }
+EXPORT_SYMBOL_GPL(xenbus_probe_devices);

 static unsigned int char_count(const char *str, char c)
 {
@ -670,32 +577,18 @@ void xenbus_dev_changed(const char *node, struct xen_bus_type *bus)
 }
 EXPORT_SYMBOL_GPL(xenbus_dev_changed);

-static void frontend_changed(struct xenbus_watch *watch,
-			     const char **vec, unsigned int len)
-{
-	DPRINTK("");
-
-	xenbus_dev_changed(vec[XS_WATCH_PATH], &xenbus_frontend);
-}
-
-/* We watch for devices appearing and vanishing. */
-static struct xenbus_watch fe_watch = {
-	.node = "device",
-	.callback = frontend_changed,
-};
-
-static int xenbus_dev_suspend(struct device *dev, pm_message_t state)
+int xenbus_dev_suspend(struct device *dev, pm_message_t state)
 {
 	int err = 0;
 	struct xenbus_driver *drv;
-	struct xenbus_device *xdev;
+	struct xenbus_device *xdev
+		= container_of(dev, struct xenbus_device, dev);

-	DPRINTK("");
+	DPRINTK("%s", xdev->nodename);

 	if (dev->driver == NULL)
 		return 0;
 	drv = to_xenbus_driver(dev->driver);
-	xdev = container_of(dev, struct xenbus_device, dev);
 	if (drv->suspend)
 		err = drv->suspend(xdev, state);
 	if (err)
@ -703,21 +596,20 @@ static int xenbus_dev_suspend(struct device *dev, pm_message_t state)
 		       "xenbus: suspend %s failed: %i\n", dev_name(dev), err);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(xenbus_dev_suspend);

-static int xenbus_dev_resume(struct device *dev)
+int xenbus_dev_resume(struct device *dev)
 {
 	int err;
 	struct xenbus_driver *drv;
-	struct xenbus_device *xdev;
+	struct xenbus_device *xdev
+		= container_of(dev, struct xenbus_device, dev);

-	DPRINTK("");
+	DPRINTK("%s", xdev->nodename);

 	if (dev->driver == NULL)
 		return 0;
-
 	drv = to_xenbus_driver(dev->driver);
-	xdev = container_of(dev, struct xenbus_device, dev);
-
 	err = talk_to_otherend(xdev);
 	if (err) {
 		printk(KERN_WARNING
@ -748,6 +640,7 @@ static int xenbus_dev_resume(struct device *dev)

 	return 0;
 }
+EXPORT_SYMBOL_GPL(xenbus_dev_resume);

 /* A flag to determine if xenstored is 'ready' (i.e. has started) */
 int xenstored_ready = 0;
@ -776,11 +669,6 @@ void xenbus_probe(struct work_struct *unused)
 {
 	xenstored_ready = 1;

-	/* Enumerate devices in xenstore and watch for changes. */
-	xenbus_probe_devices(&xenbus_frontend);
-	register_xenbus_watch(&fe_watch);
-	xenbus_backend_probe_and_watch();
-
 	/* Notify others that xenstore is up */
 	blocking_notifier_call_chain(&xenstore_chain, 0, NULL);
 }
@ -809,16 +697,7 @@ static int __init xenbus_init(void)

 	err = -ENODEV;
 	if (!xen_domain())
-		goto out_error;
-
-	/* Register ourselves with the kernel bus subsystem */
-	err = bus_register(&xenbus_frontend.bus);
-	if (err)
-		goto out_error;
-
-	err = xenbus_backend_bus_register();
-	if (err)
-		goto out_unreg_front;
+		return err;

 	/*
 	 * Domain0 doesn't have a store_evtchn or store_mfn yet.
@ -874,7 +753,7 @@ static int __init xenbus_init(void)
 	if (err) {
 		printk(KERN_WARNING
 		       "XENBUS: Error initializing xenstore comms: %i\n", err);
-		goto out_unreg_back;
+		goto out_error;
 	}

 #ifdef CONFIG_XEN_COMPAT_XENFS
@ -887,133 +766,13 @@ static int __init xenbus_init(void)

 	return 0;

-  out_unreg_back:
-	xenbus_backend_bus_unregister();
-
-  out_unreg_front:
-	bus_unregister(&xenbus_frontend.bus);
-
  out_error:
 	if (page != 0)
 		free_page(page);
+
 	return err;
 }

 postcore_initcall(xenbus_init);

 MODULE_LICENSE("GPL");
-
-static int is_device_connecting(struct device *dev, void *data)
-{
-	struct xenbus_device *xendev = to_xenbus_device(dev);
-	struct device_driver *drv = data;
-	struct xenbus_driver *xendrv;
-
-	/*
-	 * A device with no driver will never connect. We care only about
-	 * devices which should currently be in the process of connecting.
-	 */
-	if (!dev->driver)
-		return 0;
-
-	/* Is this search limited to a particular driver? */
-	if (drv && (dev->driver != drv))
-		return 0;
-
-	xendrv = to_xenbus_driver(dev->driver);
-	return (xendev->state < XenbusStateConnected ||
-		(xendev->state == XenbusStateConnected &&
-		 xendrv->is_ready && !xendrv->is_ready(xendev)));
-}
-
-static int exists_connecting_device(struct device_driver *drv)
-{
-	return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
-				is_device_connecting);
-}
-
-static int print_device_status(struct device *dev, void *data)
-{
-	struct xenbus_device *xendev = to_xenbus_device(dev);
-	struct device_driver *drv = data;
-
-	/* Is this operation limited to a particular driver? */
-	if (drv && (dev->driver != drv))
-		return 0;
-
-	if (!dev->driver) {
-		/* Information only: is this too noisy? */
-		printk(KERN_INFO "XENBUS: Device with no driver: %s\n",
-		       xendev->nodename);
-	} else if (xendev->state < XenbusStateConnected) {
-		enum xenbus_state rstate = XenbusStateUnknown;
-		if (xendev->otherend)
-			rstate = xenbus_read_driver_state(xendev->otherend);
-		printk(KERN_WARNING "XENBUS: Timeout connecting "
-		       "to device: %s (local state %d, remote state %d)\n",
-		       xendev->nodename, xendev->state, rstate);
-	}
-
-	return 0;
-}
-
-/* We only wait for device setup after most initcalls have run. */
-static int ready_to_wait_for_devices;
-
-/*
- * On a 5-minute timeout, wait for all devices currently configured.  We need
- * to do this to guarantee that the filesystems and / or network devices
- * needed for boot are available, before we can allow the boot to proceed.
- *
- * This needs to be on a late_initcall, to happen after the frontend device
- * drivers have been initialised, but before the root fs is mounted.
- *
- * A possible improvement here would be to have the tools add a per-device
- * flag to the store entry, indicating whether it is needed at boot time.
- * This would allow people who knew what they were doing to accelerate their
- * boot slightly, but of course needs tools or manual intervention to set up
- * those flags correctly.
- */
-static void wait_for_devices(struct xenbus_driver *xendrv)
-{
-	unsigned long start = jiffies;
-	struct device_driver *drv = xendrv ? &xendrv->driver : NULL;
-	unsigned int seconds_waited = 0;
-
-	if (!ready_to_wait_for_devices || !xen_domain())
-		return;
-
-	while (exists_connecting_device(drv)) {
-		if (time_after(jiffies, start + (seconds_waited+5)*HZ)) {
-			if (!seconds_waited)
-				printk(KERN_WARNING "XENBUS: Waiting for "
-				       "devices to initialise: ");
-			seconds_waited += 5;
-			printk("%us...", 300 - seconds_waited);
-			if (seconds_waited == 300)
-				break;
-		}
-
-		schedule_timeout_interruptible(HZ/10);
-	}
-
-	if (seconds_waited)
-		printk("\n");
-
-	bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
-			 print_device_status);
-}
-
-#ifndef MODULE
-static int __init boot_wait_for_devices(void)
-{
-	if (xen_hvm_domain() && !xen_platform_pci_unplug)
-		return -ENODEV;
-
-	ready_to_wait_for_devices = 1;
-	wait_for_devices(NULL);
-	return 0;
-}
-
-late_initcall(boot_wait_for_devices);
-#endif
--- a/drivers/xen/xenbus/xenbus_probe.h
+++ b/drivers/xen/xenbus/xenbus_probe.h
@ -36,26 +36,15 @@

 #define XEN_BUS_ID_SIZE			20

-#ifdef CONFIG_XEN_BACKEND
-extern void xenbus_backend_suspend(int (*fn)(struct device *, void *));
-extern void xenbus_backend_resume(int (*fn)(struct device *, void *));
-extern void xenbus_backend_probe_and_watch(void);
-extern int xenbus_backend_bus_register(void);
-extern void xenbus_backend_bus_unregister(void);
-#else
-static inline void xenbus_backend_suspend(int (*fn)(struct device *, void *)) {}
-static inline void xenbus_backend_resume(int (*fn)(struct device *, void *)) {}
-static inline void xenbus_backend_probe_and_watch(void) {}
-static inline int xenbus_backend_bus_register(void) { return 0; }
-static inline void xenbus_backend_bus_unregister(void) {}
-#endif
-
 struct xen_bus_type
 {
 	char *root;
 	unsigned int levels;
 	int (*get_bus_id)(char bus_id[XEN_BUS_ID_SIZE], const char *nodename);
-	int (*probe)(const char *type, const char *dir);
+	int (*probe)(struct xen_bus_type *bus, const char *type,
+		     const char *dir);
+	void (*otherend_changed)(struct xenbus_watch *watch, const char **vec,
+				 unsigned int len);
 	struct bus_type bus;
 };

@ -73,4 +62,16 @@ extern int xenbus_probe_devices(struct xen_bus_type *bus);

 extern void xenbus_dev_changed(const char *node, struct xen_bus_type *bus);

+extern void xenbus_dev_shutdown(struct device *_dev);
+
+extern int xenbus_dev_suspend(struct device *dev, pm_message_t state);
+extern int xenbus_dev_resume(struct device *dev);
+
+extern void xenbus_otherend_changed(struct xenbus_watch *watch,
+				    const char **vec, unsigned int len,
+				    int ignore_on_shutdown);
+
+extern int xenbus_read_otherend_details(struct xenbus_device *xendev,
+					char *id_node, char *path_node);
+
 #endif
--- a/drivers/xen/xenbus/xenbus_probe_backend.c
+++ b/drivers/xen/xenbus/xenbus_probe_backend.c
@ -0,0 +1,276 @@
+/******************************************************************************
+ * Talks to Xen Store to figure out what devices we have (backend half).
+ *
+ * Copyright (C) 2005 Rusty Russell, IBM Corporation
+ * Copyright (C) 2005 Mike Wray, Hewlett-Packard
+ * Copyright (C) 2005, 2006 XenSource Ltd
+ * Copyright (C) 2007 Solarflare Communications, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#define DPRINTK(fmt, args...)				\
+	pr_debug("xenbus_probe (%s:%d) " fmt ".\n",	\
+		 __func__, __LINE__, ##args)
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/notifier.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/hypervisor.h>
+#include <xen/xenbus.h>
+#include <xen/features.h>
+
+#include "xenbus_comms.h"
+#include "xenbus_probe.h"
+
+/* backend/<type>/<fe-uuid>/<id> => <type>-<fe-domid>-<id> */
+static int backend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename)
+{
+	int domid, err;
+	const char *devid, *type, *frontend;
+	unsigned int typelen;
+
+	type = strchr(nodename, '/');
+	if (!type)
+		return -EINVAL;
+	type++;
+	typelen = strcspn(type, "/");
+	if (!typelen || type[typelen] != '/')
+		return -EINVAL;
+
+	devid = strrchr(nodename, '/') + 1;
+
+	err = xenbus_gather(XBT_NIL, nodename, "frontend-id", "%i", &domid,
+			    "frontend", NULL, &frontend,
+			    NULL);
+	if (err)
+		return err;
+	if (strlen(frontend) == 0)
+		err = -ERANGE;
+	if (!err && !xenbus_exists(XBT_NIL, frontend, ""))
+		err = -ENOENT;
+	kfree(frontend);
+
+	if (err)
+		return err;
+
+	if (snprintf(bus_id, XEN_BUS_ID_SIZE, "%.*s-%i-%s",
+		     typelen, type, domid, devid) >= XEN_BUS_ID_SIZE)
+		return -ENOSPC;
+	return 0;
+}
+
+static int xenbus_uevent_backend(struct device *dev,
+				 struct kobj_uevent_env *env)
+{
+	struct xenbus_device *xdev;
+	struct xenbus_driver *drv;
+	struct xen_bus_type *bus;
+
+	DPRINTK("");
+
+	if (dev == NULL)
+		return -ENODEV;
+
+	xdev = to_xenbus_device(dev);
+	bus = container_of(xdev->dev.bus, struct xen_bus_type, bus);
+	if (xdev == NULL)
+		return -ENODEV;
+
+	/* stuff we want to pass to /sbin/hotplug */
+	if (add_uevent_var(env, "XENBUS_TYPE=%s", xdev->devicetype))
+		return -ENOMEM;
+
+	if (add_uevent_var(env, "XENBUS_PATH=%s", xdev->nodename))
+		return -ENOMEM;
+
+	if (add_uevent_var(env, "XENBUS_BASE_PATH=%s", bus->root))
+		return -ENOMEM;
+
+	if (dev->driver) {
+		drv = to_xenbus_driver(dev->driver);
+		if (drv && drv->uevent)
+			return drv->uevent(xdev, env);
+	}
+
+	return 0;
+}
+
+/* backend/<typename>/<frontend-uuid>/<name> */
+static int xenbus_probe_backend_unit(struct xen_bus_type *bus,
+				     const char *dir,
+				     const char *type,
+				     const char *name)
+{
+	char *nodename;
+	int err;
+
+	nodename = kasprintf(GFP_KERNEL, "%s/%s", dir, name);
+	if (!nodename)
+		return -ENOMEM;
+
+	DPRINTK("%s\n", nodename);
+
+	err = xenbus_probe_node(bus, type, nodename);
+	kfree(nodename);
+	return err;
+}
+
+/* backend/<typename>/<frontend-domid> */
+static int xenbus_probe_backend(struct xen_bus_type *bus, const char *type,
+				const char *domid)
+{
+	char *nodename;
+	int err = 0;
+	char **dir;
+	unsigned int i, dir_n = 0;
+
+	DPRINTK("");
+
+	nodename = kasprintf(GFP_KERNEL, "%s/%s/%s", bus->root, type, domid);
+	if (!nodename)
+		return -ENOMEM;
+
+	dir = xenbus_directory(XBT_NIL, nodename, "", &dir_n);
+	if (IS_ERR(dir)) {
+		kfree(nodename);
+		return PTR_ERR(dir);
+	}
+
+	for (i = 0; i < dir_n; i++) {
+		err = xenbus_probe_backend_unit(bus, nodename, type, dir[i]);
+		if (err)
+			break;
+	}
+	kfree(dir);
+	kfree(nodename);
+	return err;
+}
+
+static void frontend_changed(struct xenbus_watch *watch,
+			    const char **vec, unsigned int len)
+{
+	xenbus_otherend_changed(watch, vec, len, 0);
+}
+
+static struct device_attribute xenbus_backend_dev_attrs[] = {
+	__ATTR_NULL
+};
+
+static struct xen_bus_type xenbus_backend = {
+	.root = "backend",
+	.levels = 3,		/* backend/type/<frontend>/<id> */
+	.get_bus_id = backend_bus_id,
+	.probe = xenbus_probe_backend,
+	.otherend_changed = frontend_changed,
+	.bus = {
+		.name		= "xen-backend",
+		.match		= xenbus_match,
+		.uevent		= xenbus_uevent_backend,
+		.probe		= xenbus_dev_probe,
+		.remove		= xenbus_dev_remove,
+		.shutdown	= xenbus_dev_shutdown,
+		.dev_attrs	= xenbus_backend_dev_attrs,
+	},
+};
+
+static void backend_changed(struct xenbus_watch *watch,
+			    const char **vec, unsigned int len)
+{
+	DPRINTK("");
+
+	xenbus_dev_changed(vec[XS_WATCH_PATH], &xenbus_backend);
+}
+
+static struct xenbus_watch be_watch = {
+	.node = "backend",
+	.callback = backend_changed,
+};
+
+static int read_frontend_details(struct xenbus_device *xendev)
+{
+	return xenbus_read_otherend_details(xendev, "frontend-id", "frontend");
+}
+
+int xenbus_dev_is_online(struct xenbus_device *dev)
+{
+	int rc, val;
+
+	rc = xenbus_scanf(XBT_NIL, dev->nodename, "online", "%d", &val);
+	if (rc != 1)
+		val = 0; /* no online node present */
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(xenbus_dev_is_online);
+
+int __xenbus_register_backend(struct xenbus_driver *drv,
+			      struct module *owner, const char *mod_name)
+{
+	drv->read_otherend_details = read_frontend_details;
+
+	return xenbus_register_driver_common(drv, &xenbus_backend,
+					     owner, mod_name);
+}
+EXPORT_SYMBOL_GPL(__xenbus_register_backend);
+
+static int backend_probe_and_watch(struct notifier_block *notifier,
+				   unsigned long event,
+				   void *data)
+{
+	/* Enumerate devices in xenstore and watch for changes. */
+	xenbus_probe_devices(&xenbus_backend);
+	register_xenbus_watch(&be_watch);
+
+	return NOTIFY_DONE;
+}
+
+static int __init xenbus_probe_backend_init(void)
+{
+	static struct notifier_block xenstore_notifier = {
+		.notifier_call = backend_probe_and_watch
+	};
+	int err;
+
+	DPRINTK("");
+
+	/* Register ourselves with the kernel bus subsystem */
+	err = bus_register(&xenbus_backend.bus);
+	if (err)
+		return err;
+
+	register_xenstore_notifier(&xenstore_notifier);
+
+	return 0;
+}
+subsys_initcall(xenbus_probe_backend_init);
--- a/drivers/xen/xenbus/xenbus_probe_frontend.c
+++ b/drivers/xen/xenbus/xenbus_probe_frontend.c
@ -0,0 +1,294 @@
+#define DPRINTK(fmt, args...)				\
+	pr_debug("xenbus_probe (%s:%d) " fmt ".\n",	\
+		 __func__, __LINE__, ##args)
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/notifier.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/xen/hypervisor.h>
+#include <xen/xenbus.h>
+#include <xen/events.h>
+#include <xen/page.h>
+
+#include <xen/platform_pci.h>
+
+#include "xenbus_comms.h"
+#include "xenbus_probe.h"
+
+
+/* device/<type>/<id> => <type>-<id> */
+static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename)
+{
+	nodename = strchr(nodename, '/');
+	if (!nodename || strlen(nodename + 1) >= XEN_BUS_ID_SIZE) {
+		printk(KERN_WARNING "XENBUS: bad frontend %s\n", nodename);
+		return -EINVAL;
+	}
+
+	strlcpy(bus_id, nodename + 1, XEN_BUS_ID_SIZE);
+	if (!strchr(bus_id, '/')) {
+		printk(KERN_WARNING "XENBUS: bus_id %s no slash\n", bus_id);
+		return -EINVAL;
+	}
+	*strchr(bus_id, '/') = '-';
+	return 0;
+}
+
+/* device/<typename>/<name> */
+static int xenbus_probe_frontend(struct xen_bus_type *bus, const char *type,
+				 const char *name)
+{
+	char *nodename;
+	int err;
+
+	nodename = kasprintf(GFP_KERNEL, "%s/%s/%s", bus->root, type, name);
+	if (!nodename)
+		return -ENOMEM;
+
+	DPRINTK("%s", nodename);
+
+	err = xenbus_probe_node(bus, type, nodename);
+	kfree(nodename);
+	return err;
+}
+
+static int xenbus_uevent_frontend(struct device *_dev,
+				  struct kobj_uevent_env *env)
+{
+	struct xenbus_device *dev = to_xenbus_device(_dev);
+
+	if (add_uevent_var(env, "MODALIAS=xen:%s", dev->devicetype))
+		return -ENOMEM;
+
+	return 0;
+}
+
+
+static void backend_changed(struct xenbus_watch *watch,
+			    const char **vec, unsigned int len)
+{
+	xenbus_otherend_changed(watch, vec, len, 1);
+}
+
+static struct device_attribute xenbus_frontend_dev_attrs[] = {
+	__ATTR_NULL
+};
+
+static struct xen_bus_type xenbus_frontend = {
+	.root = "device",
+	.levels = 2,		/* device/type/<id> */
+	.get_bus_id = frontend_bus_id,
+	.probe = xenbus_probe_frontend,
+	.otherend_changed = backend_changed,
+	.bus = {
+		.name		= "xen",
+		.match		= xenbus_match,
+		.uevent		= xenbus_uevent_frontend,
+		.probe		= xenbus_dev_probe,
+		.remove		= xenbus_dev_remove,
+		.shutdown	= xenbus_dev_shutdown,
+		.dev_attrs	= xenbus_frontend_dev_attrs,
+
+		.suspend	= xenbus_dev_suspend,
+		.resume		= xenbus_dev_resume,
+	},
+};
+
+static void frontend_changed(struct xenbus_watch *watch,
+			     const char **vec, unsigned int len)
+{
+	DPRINTK("");
+
+	xenbus_dev_changed(vec[XS_WATCH_PATH], &xenbus_frontend);
+}
+
+
+/* We watch for devices appearing and vanishing. */
+static struct xenbus_watch fe_watch = {
+	.node = "device",
+	.callback = frontend_changed,
+};
+
+static int read_backend_details(struct xenbus_device *xendev)
+{
+	return xenbus_read_otherend_details(xendev, "backend-id", "backend");
+}
+
+static int is_device_connecting(struct device *dev, void *data)
+{
+	struct xenbus_device *xendev = to_xenbus_device(dev);
+	struct device_driver *drv = data;
+	struct xenbus_driver *xendrv;
+
+	/*
+	 * A device with no driver will never connect. We care only about
+	 * devices which should currently be in the process of connecting.
+	 */
+	if (!dev->driver)
+		return 0;
+
+	/* Is this search limited to a particular driver? */
+	if (drv && (dev->driver != drv))
+		return 0;
+
+	xendrv = to_xenbus_driver(dev->driver);
+	return (xendev->state < XenbusStateConnected ||
+		(xendev->state == XenbusStateConnected &&
+		 xendrv->is_ready && !xendrv->is_ready(xendev)));
+}
+
+static int exists_connecting_device(struct device_driver *drv)
+{
+	return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
+				is_device_connecting);
+}
+
+static int print_device_status(struct device *dev, void *data)
+{
+	struct xenbus_device *xendev = to_xenbus_device(dev);
+	struct device_driver *drv = data;
+
+	/* Is this operation limited to a particular driver? */
+	if (drv && (dev->driver != drv))
+		return 0;
+
+	if (!dev->driver) {
+		/* Information only: is this too noisy? */
+		printk(KERN_INFO "XENBUS: Device with no driver: %s\n",
+		       xendev->nodename);
+	} else if (xendev->state < XenbusStateConnected) {
+		enum xenbus_state rstate = XenbusStateUnknown;
+		if (xendev->otherend)
+			rstate = xenbus_read_driver_state(xendev->otherend);
+		printk(KERN_WARNING "XENBUS: Timeout connecting "
+		       "to device: %s (local state %d, remote state %d)\n",
+		       xendev->nodename, xendev->state, rstate);
+	}
+
+	return 0;
+}
+
+/* We only wait for device setup after most initcalls have run. */
+static int ready_to_wait_for_devices;
+
+/*
+ * On a 5-minute timeout, wait for all devices currently configured.  We need
+ * to do this to guarantee that the filesystems and / or network devices
+ * needed for boot are available, before we can allow the boot to proceed.
+ *
+ * This needs to be on a late_initcall, to happen after the frontend device
+ * drivers have been initialised, but before the root fs is mounted.
+ *
+ * A possible improvement here would be to have the tools add a per-device
+ * flag to the store entry, indicating whether it is needed at boot time.
+ * This would allow people who knew what they were doing to accelerate their
+ * boot slightly, but of course needs tools or manual intervention to set up
+ * those flags correctly.
+ */
+static void wait_for_devices(struct xenbus_driver *xendrv)
+{
+	unsigned long start = jiffies;
+	struct device_driver *drv = xendrv ? &xendrv->driver : NULL;
+	unsigned int seconds_waited = 0;
+
+	if (!ready_to_wait_for_devices || !xen_domain())
+		return;
+
+	while (exists_connecting_device(drv)) {
+		if (time_after(jiffies, start + (seconds_waited+5)*HZ)) {
+			if (!seconds_waited)
+				printk(KERN_WARNING "XENBUS: Waiting for "
+				       "devices to initialise: ");
+			seconds_waited += 5;
+			printk("%us...", 300 - seconds_waited);
+			if (seconds_waited == 300)
+				break;
+		}
+
+		schedule_timeout_interruptible(HZ/10);
+	}
+
+	if (seconds_waited)
+		printk("\n");
+
+	bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
+			 print_device_status);
+}
+
+int __xenbus_register_frontend(struct xenbus_driver *drv,
+			       struct module *owner, const char *mod_name)
+{
+	int ret;
+
+	drv->read_otherend_details = read_backend_details;
+
+	ret = xenbus_register_driver_common(drv, &xenbus_frontend,
+					    owner, mod_name);
+	if (ret)
+		return ret;
+
+	/* If this driver is loaded as a module wait for devices to attach. */
+	wait_for_devices(drv);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__xenbus_register_frontend);
+
+static int frontend_probe_and_watch(struct notifier_block *notifier,
+				   unsigned long event,
+				   void *data)
+{
+	/* Enumerate devices in xenstore and watch for changes. */
+	xenbus_probe_devices(&xenbus_frontend);
+	register_xenbus_watch(&fe_watch);
+
+	return NOTIFY_DONE;
+}
+
+
+static int __init xenbus_probe_frontend_init(void)
+{
+	static struct notifier_block xenstore_notifier = {
+		.notifier_call = frontend_probe_and_watch
+	};
+	int err;
+
+	DPRINTK("");
+
+	/* Register ourselves with the kernel bus subsystem */
+	err = bus_register(&xenbus_frontend.bus);
+	if (err)
+		return err;
+
+	register_xenstore_notifier(&xenstore_notifier);
+
+	return 0;
+}
+subsys_initcall(xenbus_probe_frontend_init);
+
+#ifndef MODULE
+static int __init boot_wait_for_devices(void)
+{
+	if (xen_hvm_domain() && !xen_platform_pci_unplug)
+		return -ENODEV;
+
+	ready_to_wait_for_devices = 1;
+	wait_for_devices(NULL);
+	return 0;
+}
+
+late_initcall(boot_wait_for_devices);
+#endif
+
+MODULE_LICENSE("GPL");
--- a/fs/ntfs/Makefile
+++ b/fs/ntfs/Makefile
@ -6,7 +6,7 @@ ntfs-objs := aops.o attrib.o collate.o compress.o debug.o dir.o file.o \
 	     index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
 	     unistr.o upcase.o

-EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.29\"
+EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.30\"

 ifeq ($(CONFIG_NTFS_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@ -1,7 +1,7 @@
 /*
 * file.c - NTFS kernel file operations.  Part of the Linux-NTFS project.
 *
- * Copyright (c) 2001-2007 Anton Altaparmakov
+ * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.
 *
 * This program/include file is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as published
@ -1380,15 +1380,14 @@ static inline void ntfs_set_next_iovec(const struct iovec **iovp,
 * pages (out to offset + bytes), to emulate ntfs_copy_from_user()'s
 * single-segment behaviour.
 *
- * We call the same helper (__ntfs_copy_from_user_iovec_inatomic()) both
- * when atomic and when not atomic.  This is ok because
- * __ntfs_copy_from_user_iovec_inatomic() calls __copy_from_user_inatomic()
- * and it is ok to call this when non-atomic.
- * Infact, the only difference between __copy_from_user_inatomic() and
+ * We call the same helper (__ntfs_copy_from_user_iovec_inatomic()) both when
+ * atomic and when not atomic.  This is ok because it calls
+ * __copy_from_user_inatomic() and it is ok to call this when non-atomic.  In
+ * fact, the only difference between __copy_from_user_inatomic() and
 * __copy_from_user() is that the latter calls might_sleep() and the former
- * should not zero the tail of the buffer on error.  And on many
- * architectures __copy_from_user_inatomic() is just defined to
- * __copy_from_user() so it makes no difference at all on those architectures.
+ * should not zero the tail of the buffer on error.  And on many architectures
+ * __copy_from_user_inatomic() is just defined to __copy_from_user() so it
+ * makes no difference at all on those architectures.
 */
 static inline size_t ntfs_copy_from_user_iovec(struct page **pages,
 		unsigned nr_pages, unsigned ofs, const struct iovec **iov,
@ -1409,28 +1408,28 @@ static inline size_t ntfs_copy_from_user_iovec(struct page **pages,
 		if (unlikely(copied != len)) {
 			/* Do it the slow way. */
 			addr = kmap(*pages);
-			copied = __ntfs_copy_from_user_iovec_inatomic(addr + ofs,
-					*iov, *iov_ofs, len);
-			/*
-			 * Zero the rest of the target like __copy_from_user().
-			 */
-			memset(addr + ofs + copied, 0, len - copied);
-			kunmap(*pages);
+			copied = __ntfs_copy_from_user_iovec_inatomic(addr +
+					ofs, *iov, *iov_ofs, len);
 			if (unlikely(copied != len))
 				goto err_out;
+			kunmap(*pages);
 		}
 		total += len;
+		ntfs_set_next_iovec(iov, iov_ofs, len);
 		bytes -= len;
 		if (!bytes)
 			break;
-		ntfs_set_next_iovec(iov, iov_ofs, len);
 		ofs = 0;
 	} while (++pages < last_page);
 out:
 	return total;
 err_out:
-	total += copied;
+	BUG_ON(copied > len);
 	/* Zero the rest of the target like __copy_from_user(). */
+	memset(addr + ofs + copied, 0, len - copied);
+	kunmap(*pages);
+	total += copied;
+	ntfs_set_next_iovec(iov, iov_ofs, copied);
 	while (++pages < last_page) {
 		bytes -= len;
 		if (!bytes)
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@ -1,7 +1,7 @@
 /*
 * super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
 *
- * Copyright (c) 2001-2007 Anton Altaparmakov
+ * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.
 * Copyright (c) 2001,2002 Richard Russon
 *
 * This program/include file is free software; you can redistribute it and/or
@ -3193,8 +3193,8 @@ static void __exit exit_ntfs_fs(void)
 	ntfs_sysctl(0);
 }

-MODULE_AUTHOR("Anton Altaparmakov <aia21@cantab.net>");
-MODULE_DESCRIPTION("NTFS 1.2/3.x driver - Copyright (c) 2001-2007 Anton Altaparmakov");
+MODULE_AUTHOR("Anton Altaparmakov <anton@tuxera.com>");
+MODULE_DESCRIPTION("NTFS 1.2/3.x driver - Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.");
 MODULE_VERSION(NTFS_VERSION);
 MODULE_LICENSE("GPL");
 #ifdef DEBUG
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@ -94,7 +94,7 @@ struct xenbus_driver {
 	int (*remove)(struct xenbus_device *dev);
 	int (*suspend)(struct xenbus_device *dev, pm_message_t state);
 	int (*resume)(struct xenbus_device *dev);
-	int (*uevent)(struct xenbus_device *, char **, int, char *, int);
+	int (*uevent)(struct xenbus_device *, struct kobj_uevent_env *);
 	struct device_driver driver;
 	int (*read_otherend_details)(struct xenbus_device *dev);
 	int (*is_ready)(struct xenbus_device *dev);
--- a/tools/power/x86/turbostat/Makefile
+++ b/tools/power/x86/turbostat/Makefile
@ -0,0 +1,8 @@
+turbostat : turbostat.c
+
+clean :
+	rm -f turbostat
+
+install :
+	install turbostat /usr/bin/turbostat
+	install turbostat.8 /usr/share/man/man8
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@ -0,0 +1,172 @@
+.TH TURBOSTAT 8
+.SH NAME
+turbostat \- Report processor frequency and idle statistics
+.SH SYNOPSIS
+.ft B
+.B turbostat
+.RB [ "\-v" ]
+.RB [ "\-M MSR#" ]
+.RB command
+.br
+.B turbostat
+.RB [ "\-v" ]
+.RB [ "\-M MSR#" ]
+.RB [ "\-i interval_sec" ]
+.SH DESCRIPTION
+\fBturbostat \fP reports processor topology, frequency
+and idle power state statistics on modern X86 processors.
+Either \fBcommand\fP is forked and statistics are printed
+upon its completion, or statistics are printed periodically.
+
+\fBturbostat \fP
+requires that the processor
+supports an "invariant" TSC, plus the APERF and MPERF MSRs.
+\fBturbostat \fP will report idle cpu power state residency
+on processors that additionally support C-state residency counters.
+
+.SS Options
+The \fB-v\fP option increases verbosity.
+.PP
+The \fB-M MSR#\fP option dumps the specified MSR,
+in addition to the usual frequency and idle statistics.
+.PP
+The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
+The default is 5 seconds.
+.PP
+The \fBcommand\fP parameter forks \fBcommand\fP and upon its exit,
+displays the statistics gathered since it was forked.
+.PP
+.SH FIELD DESCRIPTIONS
+.nf
+\fBpkg\fP processor package number.
+\fBcore\fP processor core number.
+\fBCPU\fP Linux CPU (logical processor) number.
+\fB%c0\fP percent of the interval that the CPU retired instructions.
+\fBGHz\fP average clock rate while the CPU was in c0 state.
+\fBTSC\fP average GHz that the TSC ran during the entire interval.
+\fB%c1, %c3, %c6\fP show the percentage residency in hardware core idle states.
+\fB%pc3, %pc6\fP percentage residency in hardware package idle states.
+.fi
+.PP
+.SH EXAMPLE
+Without any parameters, turbostat prints out counters ever 5 seconds.
+(override interval with "-i sec" option, or specify a command
+for turbostat to fork).
+
+The first row of statistics reflect the average for the entire system.
+Subsequent rows show per-CPU statistics.
+
+.nf
+[root@x980]# ./turbostat
+core CPU   %c0   GHz  TSC   %c1    %c3    %c6   %pc3   %pc6
+          0.04 1.62 3.38   0.11   0.00  99.85   0.00  95.07
+  0   0   0.04 1.62 3.38   0.06   0.00  99.90   0.00  95.07
+  0   6   0.02 1.62 3.38   0.08   0.00  99.90   0.00  95.07
+  1   2   0.10 1.62 3.38   0.29   0.00  99.61   0.00  95.07
+  1   8   0.11 1.62 3.38   0.28   0.00  99.61   0.00  95.07
+  2   4   0.01 1.62 3.38   0.01   0.00  99.98   0.00  95.07
+  2  10   0.01 1.61 3.38   0.02   0.00  99.98   0.00  95.07
+  8   1   0.07 1.62 3.38   0.15   0.00  99.78   0.00  95.07
+  8   7   0.03 1.62 3.38   0.19   0.00  99.78   0.00  95.07
+  9   3   0.01 1.62 3.38   0.02   0.00  99.98   0.00  95.07
+  9   9   0.01 1.62 3.38   0.02   0.00  99.98   0.00  95.07
+ 10   5   0.01 1.62 3.38   0.13   0.00  99.86   0.00  95.07
+ 10  11   0.08 1.62 3.38   0.05   0.00  99.86   0.00  95.07
+.fi
+.SH VERBOSE EXAMPLE
+The "-v" option adds verbosity to the output:
+
+.nf
+GenuineIntel 11 CPUID levels; family:model:stepping 0x6:2c:2 (6:44:2)
+12 * 133 = 1600 MHz max efficiency
+25 * 133 = 3333 MHz TSC frequency
+26 * 133 = 3467 MHz max turbo 4 active cores
+26 * 133 = 3467 MHz max turbo 3 active cores
+27 * 133 = 3600 MHz max turbo 2 active cores
+27 * 133 = 3600 MHz max turbo 1 active cores
+
+.fi
+The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
+available at the minimum package voltage.  The \fBTSC frequency\fP is the nominal
+maximum frequency of the processor if turbo-mode were not available.  This frequency
+should be sustainable on all CPUs indefinitely, given nominal power and cooling.
+The remaining rows show what maximum turbo frequency is possible
+depending on the number of idle cores.  Note that this information is
+not available on all processors.
+.SH FORK EXAMPLE
+If turbostat is invoked with a command, it will fork that command
+and output the statistics gathered when the command exits.
+eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
+until ^C while the other CPUs are mostly idle:
+
+.nf
+[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
+
+^Ccore CPU   %c0   GHz  TSC   %c1    %c3    %c6   %pc3   %pc6
+           8.49 3.63 3.38  16.23   0.66  74.63   0.00   0.00
+   0   0   1.22 3.62 3.38  32.18   0.00  66.60   0.00   0.00
+   0   6   0.40 3.61 3.38  33.00   0.00  66.60   0.00   0.00
+   1   2   0.11 3.14 3.38   0.19   3.95  95.75   0.00   0.00
+   1   8   0.05 2.88 3.38   0.25   3.95  95.75   0.00   0.00
+   2   4   0.00 3.13 3.38   0.02   0.00  99.98   0.00   0.00
+   2  10   0.00 3.09 3.38   0.02   0.00  99.98   0.00   0.00
+   8   1   0.04 3.50 3.38  14.43   0.00  85.54   0.00   0.00
+   8   7   0.03 2.98 3.38  14.43   0.00  85.54   0.00   0.00
+   9   3   0.00 3.16 3.38 100.00   0.00   0.00   0.00   0.00
+   9   9  99.93 3.63 3.38   0.06   0.00   0.00   0.00   0.00
+  10   5   0.01 2.82 3.38   0.08   0.00  99.91   0.00   0.00
+  10  11   0.02 3.36 3.38   0.06   0.00  99.91   0.00   0.00
+6.950866 sec
+
+.fi
+Above the cycle soaker drives cpu9 up 3.6 Ghz turbo limit
+while the other processors are generally in various states of idle.
+
+Note that cpu3 is an HT sibling sharing core9
+with cpu9, and thus it is unable to get to an idle state
+deeper than c1 while cpu9 is busy.
+
+Note that turbostat reports average GHz of 3.61, while
+the arithmetic average of the GHz column above is 3.24.
+This is a weighted average, where the weight is %c0.  ie. it is the total number of
+un-halted cycles elapsed per time divided by the number of CPUs.
+.SH NOTES
+
+.B "turbostat "
+must be run as root.
+
+.B "turbostat "
+reads hardware counters, but doesn't write them.
+So it will not interfere with the OS or other programs, including
+multiple invocations of itself.
+
+\fBturbostat \fP
+may work poorly on Linux-2.6.20 through 2.6.29,
+as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF
+in those kernels.
+
+The APERF, MPERF MSRs are defined to count non-halted cycles.
+Although it is not guaranteed by the architecture, turbostat assumes
+that they count at TSC rate, which is true on all processors tested to date.
+
+.SH REFERENCES
+"Intel® Turbo Boost Technology
+in Intel® Core™ Microarchitecture (Nehalem) Based Processors"
+http://download.intel.com/design/processor/applnots/320354.pdf
+
+"Intel® 64 and IA-32 Architectures Software Developer's Manual
+Volume 3B: System Programming Guide"
+http://www.intel.com/products/processor/manuals/
+
+.SH FILES
+.ta
+.nf
+/dev/cpu/*/msr
+.fi
+
+.SH "SEE ALSO"
+msr(4), vmstat(8)
+.PP
+.SH AUTHORS
+.nf
+Written by Len Brown <len.brown@intel.com>
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
--- a/tools/power/x86/x86_energy_perf_policy/Makefile
+++ b/tools/power/x86/x86_energy_perf_policy/Makefile
@ -0,0 +1,8 @@
+x86_energy_perf_policy : x86_energy_perf_policy.c
+
+clean :
+	rm -f x86_energy_perf_policy
+
+install :
+	install x86_energy_perf_policy /usr/bin/
+	install x86_energy_perf_policy.8 /usr/share/man/man8/
--- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8
@ -0,0 +1,104 @@
+.\"  This page Copyright (C) 2010 Len Brown <len.brown@intel.com>
+.\"  Distributed under the GPL, Copyleft 1994.
+.TH X86_ENERGY_PERF_POLICY 8
+.SH NAME
+x86_energy_perf_policy \- read or write MSR_IA32_ENERGY_PERF_BIAS
+.SH SYNOPSIS
+.ft B
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB "\-r"
+.br
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB 'performance'
+.br
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB 'normal'
+.br
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB 'powersave'
+.br
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB n
+.br
+.SH DESCRIPTION
+\fBx86_energy_perf_policy\fP
+allows software to convey
+its policy for the relative importance of performance
+versus energy savings to the processor.
+
+The processor uses this information in model-specific ways
+when it must select trade-offs between performance and
+energy efficiency.
+
+This policy hint does not supersede Processor Performance states
+(P-states) or CPU Idle power states (C-states), but allows
+software to have influence where it would otherwise be unable
+to express a preference.
+
+For example, this setting may tell the hardware how
+aggressively or conservatively to control frequency
+in the "turbo range" above the explicitly OS-controlled
+P-state frequency range.  It may also tell the hardware
+how aggressively is should enter the OS requested C-states.
+
+Support for this feature is indicated by CPUID.06H.ECX.bit3
+per the Intel Architectures Software Developer's Manual.
+
+.SS Options
+\fB-c\fP limits operation to a single CPU.
+The default is to operate on all CPUs.
+Note that MSR_IA32_ENERGY_PERF_BIAS is defined per
+logical processor, but that the initial implementations
+of the MSR were shared among all processors in each package.
+.PP
+\fB-v\fP increases verbosity.  By default
+x86_energy_perf_policy is silent.
+.PP
+\fB-r\fP is for "read-only" mode - the unchanged state
+is read and displayed.
+.PP
+.I performance
+Set a policy where performance is paramount.
+The processor will be unwilling to sacrifice any performance
+for the sake of energy saving. This is the hardware default.
+.PP
+.I normal
+Set a policy with a normal balance between performance and energy efficiency.
+The processor will tolerate minor performance compromise
+for potentially significant energy savings.
+This reasonable default for most desktops and servers.
+.PP
+.I powersave
+Set a policy where the processor can accept
+a measurable performance hit to maximize energy efficiency.
+.PP
+.I n
+Set MSR_IA32_ENERGY_PERF_BIAS to the specified number.
+The range of valid numbers is 0-15, where 0 is maximum
+performance and 15 is maximum energy efficiency.
+
+.SH NOTES
+.B "x86_energy_perf_policy "
+runs only as root.
+.SH FILES
+.ta
+.nf
+/dev/cpu/*/msr
+.fi
+
+.SH "SEE ALSO"
+msr(4)
+.PP
+.SH AUTHORS
+.nf
+Written by Len Brown <len.brown@intel.com>
--- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
@ -0,0 +1,325 @@
+/*
+ * x86_energy_perf_policy -- set the energy versus performance
+ * policy preference bias on recent X86 processors.
+ */
+/*
+ * Copyright (c) 2010, Intel Corporation.
+ * Len Brown <len.brown@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/resource.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <sys/time.h>
+#include <stdlib.h>
+#include <string.h>
+
+unsigned int verbose;		/* set with -v */
+unsigned int read_only;		/* set with -r */
+char *progname;
+unsigned long long new_bias;
+int cpu = -1;
+
+/*
+ * Usage:
+ *
+ * -c cpu: limit action to a single CPU (default is all CPUs)
+ * -v: verbose output (can invoke more than once)
+ * -r: read-only, don't change any settings
+ *
+ *  performance
+ *	Performance is paramount.
+ *	Unwilling to sacrafice any performance
+ *	for the sake of energy saving. (hardware default)
+ *
+ *  normal
+ *	Can tolerate minor performance compromise
+ *	for potentially significant energy savings.
+ *	(reasonable default for most desktops and servers)
+ *
+ *  powersave
+ *	Can tolerate significant performance hit
+ *	to maximize energy savings.
+ *
+ * n
+ *	a numerical value to write to the underlying MSR.
+ */
+void usage(void)
+{
+	printf("%s: [-c cpu] [-v] "
+		"(-r | 'performance' | 'normal' | 'powersave' | n)\n",
+		progname);
+	exit(1);
+}
+
+#define MSR_IA32_ENERGY_PERF_BIAS	0x000001b0
+
+#define	BIAS_PERFORMANCE		0
+#define BIAS_BALANCE			6
+#define	BIAS_POWERSAVE			15
+
+void cmdline(int argc, char **argv)
+{
+	int opt;
+
+	progname = argv[0];
+
+	while ((opt = getopt(argc, argv, "+rvc:")) != -1) {
+		switch (opt) {
+		case 'c':
+			cpu = atoi(optarg);
+			break;
+		case 'r':
+			read_only = 1;
+			break;
+		case 'v':
+			verbose++;
+			break;
+		default:
+			usage();
+		}
+	}
+	/* if -r, then should be no additional optind */
+	if (read_only && (argc > optind))
+		usage();
+
+	/*
+	 * if no -r , then must be one additional optind
+	 */
+	if (!read_only) {
+
+		if (argc != optind + 1) {
+			printf("must supply -r or policy param\n");
+			usage();
+			}
+
+		if (!strcmp("performance", argv[optind])) {
+			new_bias = BIAS_PERFORMANCE;
+		} else if (!strcmp("normal", argv[optind])) {
+			new_bias = BIAS_BALANCE;
+		} else if (!strcmp("powersave", argv[optind])) {
+			new_bias = BIAS_POWERSAVE;
+		} else {
+			char *endptr;
+
+			new_bias = strtoull(argv[optind], &endptr, 0);
+			if (endptr == argv[optind] ||
+				new_bias > BIAS_POWERSAVE) {
+					fprintf(stderr, "invalid value: %s\n",
+						argv[optind]);
+				usage();
+			}
+		}
+	}
+}
+
+/*
+ * validate_cpuid()
+ * returns on success, quietly exits on failure (make verbose with -v)
+ */
+void validate_cpuid(void)
+{
+	unsigned int eax, ebx, ecx, edx, max_level;
+	char brand[16];
+	unsigned int fms, family, model, stepping;
+
+	eax = ebx = ecx = edx = 0;
+
+	asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx),
+		"=d" (edx) : "a" (0));
+
+	if (ebx != 0x756e6547 || edx != 0x49656e69 || ecx != 0x6c65746e) {
+		if (verbose)
+			fprintf(stderr, "%.4s%.4s%.4s != GenuineIntel",
+				(char *)&ebx, (char *)&edx, (char *)&ecx);
+		exit(1);
+	}
+
+	asm("cpuid" : "=a" (fms), "=c" (ecx), "=d" (edx) : "a" (1) : "ebx");
+	family = (fms >> 8) & 0xf;
+	model = (fms >> 4) & 0xf;
+	stepping = fms & 0xf;
+	if (family == 6 || family == 0xf)
+		model += ((fms >> 16) & 0xf) << 4;
+
+	if (verbose > 1)
+		printf("CPUID %s %d levels family:model:stepping "
+			"0x%x:%x:%x (%d:%d:%d)\n", brand, max_level,
+			family, model, stepping, family, model, stepping);
+
+	if (!(edx & (1 << 5))) {
+		if (verbose)
+			printf("CPUID: no MSR\n");
+		exit(1);
+	}
+
+	/*
+	 * Support for MSR_IA32_ENERGY_PERF_BIAS
+	 * is indicated by CPUID.06H.ECX.bit3
+	 */
+	asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (6));
+	if (verbose)
+		printf("CPUID.06H.ECX: 0x%x\n", ecx);
+	if (!(ecx & (1 << 3))) {
+		if (verbose)
+			printf("CPUID: No MSR_IA32_ENERGY_PERF_BIAS\n");
+		exit(1);
+	}
+	return;	/* success */
+}
+
+unsigned long long get_msr(int cpu, int offset)
+{
+	unsigned long long msr;
+	char msr_path[32];
+	int retval;
+	int fd;
+
+	sprintf(msr_path, "/dev/cpu/%d/msr", cpu);
+	fd = open(msr_path, O_RDONLY);
+	if (fd < 0) {
+		printf("Try \"# modprobe msr\"\n");
+		perror(msr_path);
+		exit(1);
+	}
+
+	retval = pread(fd, &msr, sizeof msr, offset);
+
+	if (retval != sizeof msr) {
+		printf("pread cpu%d 0x%x = %d\n", cpu, offset, retval);
+		exit(-2);
+	}
+	close(fd);
+	return msr;
+}
+
+unsigned long long  put_msr(int cpu, unsigned long long new_msr, int offset)
+{
+	unsigned long long old_msr;
+	char msr_path[32];
+	int retval;
+	int fd;
+
+	sprintf(msr_path, "/dev/cpu/%d/msr", cpu);
+	fd = open(msr_path, O_RDWR);
+	if (fd < 0) {
+		perror(msr_path);
+		exit(1);
+	}
+
+	retval = pread(fd, &old_msr, sizeof old_msr, offset);
+	if (retval != sizeof old_msr) {
+		perror("pwrite");
+		printf("pread cpu%d 0x%x = %d\n", cpu, offset, retval);
+		exit(-2);
+	}
+
+	retval = pwrite(fd, &new_msr, sizeof new_msr, offset);
+	if (retval != sizeof new_msr) {
+		perror("pwrite");
+		printf("pwrite cpu%d 0x%x = %d\n", cpu, offset, retval);
+		exit(-2);
+	}
+
+	close(fd);
+
+	return old_msr;
+}
+
+void print_msr(int cpu)
+{
+	printf("cpu%d: 0x%016llx\n",
+		cpu, get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS));
+}
+
+void update_msr(int cpu)
+{
+	unsigned long long previous_msr;
+
+	previous_msr = put_msr(cpu, new_bias, MSR_IA32_ENERGY_PERF_BIAS);
+
+	if (verbose)
+		printf("cpu%d  msr0x%x 0x%016llx -> 0x%016llx\n",
+			cpu, MSR_IA32_ENERGY_PERF_BIAS, previous_msr, new_bias);
+
+	return;
+}
+
+char *proc_stat = "/proc/stat";
+/*
+ * run func() on every cpu in /dev/cpu
+ */
+void for_every_cpu(void (func)(int))
+{
+	FILE *fp;
+	int retval;
+
+	fp = fopen(proc_stat, "r");
+	if (fp == NULL) {
+		perror(proc_stat);
+		exit(1);
+	}
+
+	retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n");
+	if (retval != 0) {
+		perror("/proc/stat format");
+		exit(1);
+	}
+
+	while (1) {
+		int cpu;
+
+		retval = fscanf(fp,
+			"cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n",
+			&cpu);
+		if (retval != 1)
+			return;
+
+		func(cpu);
+	}
+	fclose(fp);
+}
+
+int main(int argc, char **argv)
+{
+	cmdline(argc, argv);
+
+	if (verbose > 1)
+		printf("x86_energy_perf_policy Nov 24, 2010"
+				" - Len Brown <lenb@kernel.org>\n");
+	if (verbose > 1 && !read_only)
+		printf("new_bias %lld\n", new_bias);
+
+	validate_cpuid();
+
+	if (cpu != -1) {
+		if (read_only)
+			print_msr(cpu);
+		else
+			update_msr(cpu);
+	} else {
+		if (read_only)
+			for_every_cpu(print_msr);
+		else
+			for_every_cpu(update_msr);
+	}
+
+	return 0;
+}
--- a/tools/testing/ktest/compare-ktest-sample.pl
+++ b/tools/testing/ktest/compare-ktest-sample.pl
@ -0,0 +1,30 @@
+#!/usr/bin/perl
+
+open (IN,"ktest.pl");
+while (<IN>) {
+    if (/\$opt\{"?([A-Z].*?)(\[.*\])?"?\}/ ||
+	/set_test_option\("(.*?)"/) {
+	$opt{$1} = 1;
+    }
+}
+close IN;
+
+open (IN, "sample.conf");
+while (<IN>) {
+    if (/^\s*#?\s*(\S+)\s*=/) {
+	$samp{$1} = 1;
+    }
+}
+close IN;
+
+foreach $opt (keys %opt) {
+    if (!defined($samp{$opt})) {
+	print "opt = $opt\n";
+    }
+}
+
+foreach $samp (keys %samp) {
+    if (!defined($opt{$samp})) {
+	print "samp = $samp\n";
+    }
+}
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@ -0,0 +1,622 @@
+#
+# Config file for ktest.pl
+#
+# Note, all paths must be absolute
+#
+
+# Options set in the beginning of the file are considered to be
+# default options. These options can be overriden by test specific
+# options, with the following exceptions:
+#
+#  LOG_FILE
+#  CLEAR_LOG
+#  POWEROFF_ON_SUCCESS
+#  REBOOT_ON_SUCCESS
+#
+# Test specific options are set after the label:
+#
+# TEST_START
+#
+# The options after a TEST_START label are specific to that test.
+# Each TEST_START label will set up a new test. If you want to
+# perform a test more than once, you can add the ITERATE label
+# to it followed by the number of times you want that test
+# to iterate. If the ITERATE is left off, the test will only
+# be performed once.
+#
+# TEST_START ITERATE 10
+#
+# You can skip a test by adding SKIP (before or after the ITERATE
+# and number)
+#
+# TEST_START SKIP
+#
+# TEST_START SKIP ITERATE 10
+#
+# TEST_START ITERATE 10 SKIP
+#
+# The SKIP label causes the options and the test itself to be ignored.
+# This is useful to set up several different tests in one config file, and
+# only enabling the ones you want to use for a current test run.
+#
+# You can add default options anywhere in the file as well
+# with the DEFAULTS tag. This allows you to have default options
+# after the test options to keep the test options at the top
+# of the file. You can even place the DEFAULTS tag between
+# test cases (but not in the middle of a single test case)
+#
+# TEST_START
+# MIN_CONFIG = /home/test/config-test1
+#
+# DEFAULTS
+# MIN_CONFIG = /home/test/config-default
+#
+# TEST_START ITERATE 10
+#
+# The above will run the first test with MIN_CONFIG set to
+# /home/test/config-test-1. Then 10 tests will be executed
+# with MIN_CONFIG with /home/test/config-default.
+#
+# You can also disable defaults with the SKIP option
+#
+# DEFAULTS SKIP
+# MIN_CONFIG = /home/test/config-use-sometimes
+#
+# DEFAULTS
+# MIN_CONFIG = /home/test/config-most-times
+#
+# The above will ignore the first MIN_CONFIG. If you want to
+# use the first MIN_CONFIG, remove the SKIP from the first
+# DEFAULTS tag and add it to the second. Be careful, options
+# may only be declared once per test or default. If you have
+# the same option name under the same test or as default
+# ktest will fail to execute, and no tests will run.
+#
+
+
+#### Mandatory Default Options ####
+
+# These options must be in the default section, although most
+# may be overridden by test options.
+
+# The machine hostname that you will test
+#MACHINE = target
+
+# The box is expected to have ssh on normal bootup, provide the user
+#  (most likely root, since you need privileged operations)
+#SSH_USER = root
+
+# The directory that contains the Linux source code
+#BUILD_DIR = /home/test/linux.git
+
+# The directory that the objects will be built
+# (can not be same as BUILD_DIR)
+#OUTPUT_DIR = /home/test/build/target
+
+# The location of the compiled file to copy to the target
+# (relative to OUTPUT_DIR)
+#BUILD_TARGET = arch/x86/boot/bzImage
+
+# The place to put your image on the test machine
+#TARGET_IMAGE = /boot/vmlinuz-test
+
+# A script or command to reboot the box
+#
+# Here is a digital loggers power switch example
+#POWER_CYCLE = wget --no-proxy -O /dev/null -q  --auth-no-challenge 'http://admin:admin@power/outlet?5=CCL'
+#
+# Here is an example to reboot a virtual box on the current host
+# with the name "Guest".
+#POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest
+
+# The script or command that reads the console
+#
+#  If you use ttywatch server, something like the following would work.
+#CONSOLE = nc -d localhost 3001
+#
+# For a virtual machine with guest name "Guest".
+#CONSOLE =  virsh console Guest
+
+# Required version ending to differentiate the test
+# from other linux builds on the system.
+#LOCALVERSION = -test
+
+# The grub title name for the test kernel to boot
+# (Only mandatory if REBOOT_TYPE = grub)
+#
+# Note, ktest.pl will not update the grub menu.lst, you need to
+# manually add an option for the test. ktest.pl will search
+# the grub menu.lst for this option to find what kernel to
+# reboot into.
+#
+# For example, if in the /boot/grub/menu.lst the test kernel title has:
+# title Test Kernel
+# kernel vmlinuz-test
+#GRUB_MENU = Test Kernel
+
+# A script to reboot the target into the test kernel
+# (Only mandatory if REBOOT_TYPE = script)
+#REBOOT_SCRIPT =
+
+#### Optional Config Options (all have defaults) ####
+
+# Start a test setup. If you leave this off, all options
+# will be default and the test will run once.
+# This is a label and not really an option (it takes no value).
+# You can append ITERATE and a number after it to iterate the
+# test a number of times, or SKIP to ignore this test.
+#
+#TEST_START
+#TEST_START ITERATE 5
+#TEST_START SKIP
+
+# Have the following options as default again. Used after tests
+# have already been defined by TEST_START. Optionally, you can
+# just define all default options before the first TEST_START
+# and you do not need this option.
+#
+# This is a label and not really an option (it takes no value).
+# You can append SKIP to this label and the options within this
+# section will be ignored.
+#
+# DEFAULTS
+# DEFAULTS SKIP
+
+# The default test type (default test)
+# The test types may be:
+#   build - only build the kernel, do nothing else
+#   boot - build and boot the kernel
+#   test - build, boot and if TEST is set, run the test script
+#          (If TEST is not set, it defaults back to boot)
+#   bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
+#   patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
+#TEST_TYPE = test
+
+# Test to run if there is a successful boot and TEST_TYPE is test.
+# Must exit with 0 on success and non zero on error
+# default (undefined)
+#TEST = ssh user@machine /root/run_test
+
+# The build type is any make config type or special command
+#  (default randconfig)
+#   nobuild - skip the clean and build step
+#   useconfig:/path/to/config - use the given config and run
+#              oldconfig on it.
+# This option is ignored if TEST_TYPE is patchcheck or bisect
+#BUILD_TYPE = randconfig
+
+# The make command (default make)
+# If you are building a 32bit x86 on a 64 bit host
+#MAKE_CMD = CC=i386-gcc AS=i386-as make ARCH=i386
+
+# Any build options for the make of the kernel (not for other makes, like configs)
+# (default "")
+#BUILD_OPTIONS = -j20
+
+# If you need an initrd, you can add a script or code here to install
+# it. The environment variable KERNEL_VERSION will be set to the
+# kernel version that is used. Remember to add the initrd line
+# to your grub menu.lst file.
+#
+# Here's a couple of examples to use:
+#POST_INSTALL = ssh user@target /sbin/mkinitrd --allow-missing -f /boot/initramfs-test.img $KERNEL_VERSION
+#
+# or on some systems:
+#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+
+# Way to reboot the box to the test kernel.
+# Only valid options so far are "grub" and "script"
+# (default grub)
+# If you specify grub, it will assume grub version 1
+# and will search in /boot/grub/menu.lst for the title $GRUB_MENU
+# and select that target to reboot to the kernel. If this is not
+# your setup, then specify "script" and have a command or script
+# specified in REBOOT_SCRIPT to boot to the target.
+#
+# The entry in /boot/grub/menu.lst must be entered in manually.
+# The test will not modify that file.
+#REBOOT_TYPE = grub
+
+# The min config that is needed to build for the machine
+# A nice way to create this is with the following:
+#
+#   $ ssh target
+#   $ lsmod > mymods
+#   $ scp mymods host:/tmp
+#   $ exit
+#   $ cd linux.git
+#   $ rm .config
+#   $ make LSMOD=mymods localyesconfig
+#   $ grep '^CONFIG' .config > /home/test/config-min
+#
+# If you want even less configs:
+#
+#   log in directly to target (do not ssh)
+#
+#   $ su
+#   # lsmod | cut -d' ' -f1 | xargs rmmod
+#
+#   repeat the above several times
+#
+#   # lsmod > mymods
+#   # reboot
+#
+# May need to reboot to get your network back to copy the mymods
+# to the host, and then remove the previous .config and run the
+# localyesconfig again. The CONFIG_MIN generated like this will
+# not guarantee network activity to the box so the TEST_TYPE of
+# test may fail.
+#
+# You might also want to set:
+#   CONFIG_CMDLINE="<your options here>"
+#  randconfig may set the above and override your real command
+#  line options.
+# (default undefined)
+#MIN_CONFIG = /home/test/config-min
+
+# Sometimes there's options that just break the boot and
+# you do not care about. Here are a few:
+#   # CONFIG_STAGING is not set
+#  Staging drivers are horrible, and can break the build.
+#   # CONFIG_SCSI_DEBUG is not set
+#  SCSI_DEBUG may change your root partition
+#   # CONFIG_KGDB_SERIAL_CONSOLE is not set
+#  KGDB may cause oops waiting for a connection that's not there.
+# This option points to the file containing config options that will be prepended
+# to the MIN_CONFIG (or be the MIN_CONFIG if it is not set)
+#
+# Note, config options in MIN_CONFIG will override these options.
+#
+# (default undefined)
+#ADD_CONFIG = /home/test/config-broken
+
+# The location on the host where to write temp files
+# (default /tmp/ktest)
+#TMP_DIR = /tmp/ktest
+
+# Optional log file to write the status (recommended)
+#  Note, this is a DEFAULT section only option.
+# (default undefined)
+#LOG_FILE = /home/test/logfiles/target.log
+
+# Remove old logfile if it exists before starting all tests.
+#  Note, this is a DEFAULT section only option.
+# (default 0)
+#CLEAR_LOG = 0
+
+# Line to define a successful boot up in console output.
+# This is what the line contains, not the entire line. If you need
+# the entire line to match, then use regural expression syntax like:
+#  (do not add any quotes around it)
+#
+#  SUCCESS_LINE = ^MyBox Login:$
+#
+# (default "login:")
+#SUCCESS_LINE = login:
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test after success is recommended.
+# (in seconds)
+# (default 10)
+#STOP_AFTER_SUCCESS = 10
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test after failure is recommended.
+# (in seconds)
+# (default 60)
+#STOP_AFTER_FAILURE = 60
+
+# Stop testing if a build fails. If set, the script will end if
+# a failure is detected, otherwise it will save off the .config,
+# dmesg and bootlog in a directory called
+# MACHINE-TEST_TYPE_BUILD_TYPE-fail-yyyymmddhhmmss
+# if the STORE_FAILURES directory is set.
+# (default 1)
+# Note, even if this is set to zero, there are some errors that still
+# stop the tests.
+#DIE_ON_FAILURE = 1
+
+# Directory to store failure directories on failure. If this is not
+# set, DIE_ON_FAILURE=0 will not save off the .config, dmesg and
+# bootlog. This option is ignored if DIE_ON_FAILURE is not set.
+# (default undefined)
+#STORE_FAILURES = /home/test/failures
+
+# Build without doing a make mrproper, or removing .config
+# (default 0)
+#BUILD_NOCLEAN = 0
+
+# As the test reads the console, after it hits the SUCCESS_LINE
+# the time it waits for the monitor to settle down between reads
+# can usually be lowered.
+# (in seconds) (default 1)
+#BOOTED_TIMEOUT = 1
+
+# The timeout in seconds when we consider the box hung after
+# the console stop producing output. Be sure to leave enough
+# time here to get pass a reboot. Some machines may not produce
+# any console output for a long time during a reboot. You do
+# not want the test to fail just because the system was in
+# the process of rebooting to the test kernel.
+# (default 120)
+#TIMEOUT = 120
+
+# In between tests, a reboot of the box may occur, and this
+# is the time to wait for the console after it stops producing
+# output. Some machines may not produce a large lag on reboot
+# so this should accommodate it.
+# The difference between this and TIMEOUT, is that TIMEOUT happens
+# when rebooting to the test kernel. This sleep time happens
+# after a test has completed and we are about to start running
+# another test. If a reboot to the reliable kernel happens,
+# we wait SLEEP_TIME for the console to stop producing output
+# before starting the next test.
+# (default 60)
+#SLEEP_TIME = 60
+
+# The time in between bisects to sleep (in seconds)
+# (default 60)
+#BISECT_SLEEP_TIME = 60
+
+# Reboot the target box on error (default 0)
+#REBOOT_ON_ERROR = 0
+
+# Power off the target on error (ignored if REBOOT_ON_ERROR is set)
+#  Note, this is a DEFAULT section only option.
+# (default 0)
+#POWEROFF_ON_ERROR = 0
+
+# Power off the target after all tests have completed successfully
+#  Note, this is a DEFAULT section only option.
+# (default 0)
+#POWEROFF_ON_SUCCESS = 0
+
+# Reboot the target after all test completed successfully (default 1)
+# (ignored if POWEROFF_ON_SUCCESS is set)
+#REBOOT_ON_SUCCESS = 1
+
+# In case there are isses with rebooting, you can specify this
+# to always powercycle after this amount of time after calling
+# reboot.
+# Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just
+# makes it powercycle immediately after rebooting. Do not define
+# it if you do not want it.
+# (default undefined)
+#POWERCYCLE_AFTER_REBOOT = 5
+
+# In case there's isses with halting, you can specify this
+# to always poweroff after this amount of time after calling
+# halt.
+# Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just
+# makes it poweroff immediately after halting. Do not define
+# it if you do not want it.
+# (default undefined)
+#POWEROFF_AFTER_HALT = 20
+
+# A script or command to power off the box (default undefined)
+# Needed for POWEROFF_ON_ERROR and SUCCESS
+#
+# Example for digital loggers power switch:
+#POWER_OFF = wget --no-proxy -O /dev/null -q  --auth-no-challenge 'http://admin:admin@power/outlet?5=OFF'
+#
+# Example for a virtual guest call "Guest".
+#POWER_OFF = virsh destroy Guest
+
+# The way to execute a command on the target
+# (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";)
+# The variables SSH_USER, MACHINE and SSH_COMMAND are defined
+#SSH_EXEC = ssh $SSH_USER@$MACHINE $SSH_COMMAND";
+
+# The way to copy a file to the target
+# (default scp $SRC_FILE $SSH_USER@$MACHINE:$DST_FILE)
+# The variables SSH_USER, MACHINE, SRC_FILE and DST_FILE are defined.
+#SCP_TO_TARGET = scp $SRC_FILE $SSH_USER@$MACHINE:$DST_FILE
+
+# The nice way to reboot the target
+# (default ssh $SSH_USER@$MACHINE reboot)
+# The variables SSH_USER and MACHINE are defined.
+#REBOOT = ssh $SSH_USER@$MACHINE reboot
+
+#### Per test run options ####
+# The following options are only allowed in TEST_START sections.
+# They are ignored in the DEFAULTS sections.
+#
+# All of these are optional and undefined by default, although
+#  some of these options are required for TEST_TYPE of patchcheck
+#  and bisect.
+#
+#
+# CHECKOUT = branch
+#
+#  If the BUILD_DIR is a git repository, then you can set this option
+#  to checkout the given branch before running the TEST. If you
+#  specify this for the first run, that branch will be used for
+#  all preceding tests until a new CHECKOUT is set.
+#
+#
+#
+# For TEST_TYPE = patchcheck
+#
+#  This expects the BUILD_DIR to be a git repository, and
+#  will checkout the PATCHCHECK_START commit.
+#
+#  The option BUILD_TYPE will be ignored.
+#
+#  The MIN_CONFIG will be used for all builds of the patchcheck. The build type
+#  used for patchcheck is oldconfig.
+#
+#  PATCHCHECK_START is required and is the first patch to
+#   test (the SHA1 of the commit). You may also specify anything
+#   that git checkout allows (branch name, tage, HEAD~3).
+#
+#  PATCHCHECK_END is the last patch to check (default HEAD)
+#
+#  PATCHCHECK_TYPE is required and is the type of test to run:
+#      build, boot, test.
+#
+#   Note, the build test will look for warnings, if a warning occurred
+#     in a file that a commit touches, the build will fail.
+#
+#   If BUILD_NOCLEAN is set, then make mrproper will not be run on
+#   any of the builds, just like all other TEST_TYPE tests. But
+#   what makes patchcheck different from the other tests, is if
+#   BUILD_NOCLEAN is not set, only the first and last patch run
+#   make mrproper. This helps speed up the test.
+#
+# Example:
+#   TEST_START
+#   TEST_TYPE = patchcheck
+#   CHECKOUT = mybranch
+#   PATCHCHECK_TYPE = boot
+#   PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7
+#   PATCHCHECK_END = HEAD~2
+#
+#
+#
+# For TEST_TYPE = bisect
+#
+#  You can specify a git bisect if the BUILD_DIR is a git repository.
+#  The MIN_CONFIG will be used for all builds of the bisect. The build type
+#  used for bisecting is oldconfig.
+#
+#  The option BUILD_TYPE will be ignored.
+#
+#  BISECT_TYPE is the type of test to perform:
+#	build	- bad fails to build
+#	boot	- bad builds but fails to boot
+#	test	- bad boots but fails a test
+#
+# BISECT_GOOD is the commit (SHA1) to label as good (accepts all git good commit types)
+# BISECT_BAD is the commit to label as bad (accepts all git bad commit types)
+#
+# The above three options are required for a bisect operation.
+#
+# BISECT_REPLAY = /path/to/replay/file (optional, default undefined)
+#
+#   If an operation failed in the bisect that was not expected to
+#   fail. Then the test ends. The state of the BUILD_DIR will be
+#   left off at where the failure occurred. You can examine the
+#   reason for the failure, and perhaps even find a git commit
+#   that would work to continue with. You can run:
+#
+#   git bisect log > /path/to/replay/file
+#
+#   The adding:
+#
+#    BISECT_REPLAY= /path/to/replay/file
+#
+#   And running the test again. The test will perform the initial
+#    git bisect start, git bisect good, and git bisect bad, and
+#    then it will run git bisect replay on this file, before
+#    continuing with the bisect.
+#
+# BISECT_START = commit (optional, default undefined)
+#
+#   As with BISECT_REPLAY, if the test failed on a commit that
+#   just happen to have a bad commit in the middle of the bisect,
+#   and you need to skip it. If BISECT_START is defined, it
+#   will checkout that commit after doing the initial git bisect start,
+#   git bisect good, git bisect bad, and running the git bisect replay
+#   if the BISECT_REPLAY is set.
+#
+# BISECT_REVERSE = 1 (optional, default 0)
+#
+#   In those strange instances where it was broken forever
+#   and you are trying to find where it started to work!
+#   Set BISECT_GOOD to the commit that was last known to fail
+#   Set BISECT_BAD to the commit that is known to start working.
+#   With BISECT_REVERSE = 1, The test will consider failures as
+#   good, and success as bad.
+#
+# BISECT_CHECK = 1 (optional, default 0)
+#
+#   Just to be sure the good is good and bad is bad, setting
+#   BISECT_CHECK to 1 will start the bisect by first checking
+#   out BISECT_BAD and makes sure it fails, then it will check
+#   out BISECT_GOOD and makes sure it succeeds before starting
+#   the bisect (it works for BISECT_REVERSE too).
+#
+#   You can limit the test to just check BISECT_GOOD or
+#   BISECT_BAD with BISECT_CHECK = good or
+#   BISECT_CHECK = bad, respectively.
+#
+# Example:
+#   TEST_START
+#   TEST_TYPE = bisect
+#   BISECT_GOOD = v2.6.36
+#   BISECT_BAD = b5153163ed580e00c67bdfecb02b2e3843817b3e
+#   BISECT_TYPE = build
+#   MIN_CONFIG = /home/test/config-bisect
+#
+#
+#
+# For TEST_TYPE = config_bisect
+#
+#  In those cases that you have two different configs. One of them
+#  work, the other does not, and you do not know what config causes
+#  the problem.
+#  The TEST_TYPE config_bisect will bisect the bad config looking for
+#  what config causes the failure.
+#
+#  The way it works is this:
+#
+#   First it finds a config to work with. Since a different version, or
+#   MIN_CONFIG may cause different dependecies, it must run through this
+#   preparation.
+#
+#   Overwrites any config set in the bad config with a config set in
+#   either the MIN_CONFIG or ADD_CONFIG. Thus, make sure these configs
+#   are minimal and do not disable configs you want to test:
+#   (ie.  # CONFIG_FOO is not set).
+#
+#   An oldconfig is run on the bad config and any new config that
+#   appears will be added to the configs to test.
+#
+#   Finally, it generates a config with the above result and runs it
+#   again through make oldconfig to produce a config that should be
+#   satisfied by kconfig.
+#
+#   Then it starts the bisect.
+#
+#   The configs to test are cut in half. If all the configs in this
+#   half depend on a config in the other half, then the other half
+#   is tested instead. If no configs are enabled by either half, then
+#   this means a circular dependency exists and the test fails.
+#
+#   A config is created with the test half, and the bisect test is run.
+#
+#   If the bisect succeeds, then all configs in the generated config
+#   are removed from the configs to test and added to the configs that
+#   will be enabled for all builds (they will be enabled, but not be part
+#   of the configs to examine).
+#
+#   If the bisect fails, then all test configs that were not enabled by
+#   the config file are removed from the test. These configs will not
+#   be enabled in future tests. Since current config failed, we consider
+#   this to be a subset of the config that we started with.
+#
+#   When we are down to one config, it is considered the bad config.
+#
+#   Note, the config chosen may not be the true bad config. Due to
+#   dependencies and selections of the kbuild system, mulitple
+#   configs may be needed to cause a failure. If you disable the
+#   config that was found and restart the test, if the test fails
+#   again, it is recommended to rerun the config_bisect with a new
+#   bad config without the found config enabled.
+#
+#  The option BUILD_TYPE will be ignored.
+#
+#  CONFIG_BISECT_TYPE is the type of test to perform:
+#	build	- bad fails to build
+#	boot	- bad builds but fails to boot
+#	test	- bad boots but fails a test
+#
+#   CONFIG_BISECT is the config that failed to boot
+#
+# Example:
+#   TEST_START
+#   TEST_TYPE = config_bisect
+#   CONFIG_BISECT_TYPE = build
+#   CONFIG_BISECT = /home/test/¢onfig-bad
+#   MIN_CONFIG = /home/test/config-min
+#