memory: mvebu-devbus: use _SHIFT suffixes instead of _BIT

As noted by Sebastian Hesselbarth, the definitions in mvebu-devbus.c
are not bit definition, but rather shift values, so a _SHIFT prefix
would make more sense. This commit therefore replaces the *_BIT
definitions by *_SHIFT definitions.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1398202002-28530-7-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Thomas Petazzoni 2014-04-22 23:26:10 +02:00 committed by Jason Cooper
parent 71e2e5d397
commit 8a33692ee8

View File

@ -30,16 +30,16 @@
#include <linux/platform_device.h>
/* Register definitions */
#define ARMADA_DEV_WIDTH_BIT 30
#define ARMADA_BADR_SKEW_BIT 28
#define ARMADA_RD_HOLD_BIT 23
#define ARMADA_ACC_NEXT_BIT 17
#define ARMADA_RD_SETUP_BIT 12
#define ARMADA_ACC_FIRST_BIT 6
#define ARMADA_DEV_WIDTH_SHIFT 30
#define ARMADA_BADR_SKEW_SHIFT 28
#define ARMADA_RD_HOLD_SHIFT 23
#define ARMADA_ACC_NEXT_SHIFT 17
#define ARMADA_RD_SETUP_SHIFT 12
#define ARMADA_ACC_FIRST_SHIFT 6
#define ARMADA_SYNC_ENABLE_BIT 24
#define ARMADA_WR_HIGH_BIT 16
#define ARMADA_WR_LOW_BIT 8
#define ARMADA_SYNC_ENABLE_SHIFT 24
#define ARMADA_WR_HIGH_SHIFT 16
#define ARMADA_WR_LOW_SHIFT 8
#define ARMADA_READ_PARAM_OFFSET 0x0
#define ARMADA_WRITE_PARAM_OFFSET 0x4
@ -178,12 +178,12 @@ static int devbus_set_timing_params(struct devbus *devbus,
return err;
/* Set read timings */
value = r.bus_width << ARMADA_DEV_WIDTH_BIT |
r.badr_skew << ARMADA_BADR_SKEW_BIT |
r.rd_hold << ARMADA_RD_HOLD_BIT |
r.acc_next << ARMADA_ACC_NEXT_BIT |
r.rd_setup << ARMADA_RD_SETUP_BIT |
r.acc_first << ARMADA_ACC_FIRST_BIT |
value = r.bus_width << ARMADA_DEV_WIDTH_SHIFT |
r.badr_skew << ARMADA_BADR_SKEW_SHIFT |
r.rd_hold << ARMADA_RD_HOLD_SHIFT |
r.acc_next << ARMADA_ACC_NEXT_SHIFT |
r.rd_setup << ARMADA_RD_SETUP_SHIFT |
r.acc_first << ARMADA_ACC_FIRST_SHIFT |
r.turn_off;
dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n",
@ -193,9 +193,9 @@ static int devbus_set_timing_params(struct devbus *devbus,
writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET);
/* Set write timings */
value = w.sync_enable << ARMADA_SYNC_ENABLE_BIT |
w.wr_low << ARMADA_WR_LOW_BIT |
w.wr_high << ARMADA_WR_HIGH_BIT |
value = w.sync_enable << ARMADA_SYNC_ENABLE_SHIFT |
w.wr_low << ARMADA_WR_LOW_SHIFT |
w.wr_high << ARMADA_WR_HIGH_SHIFT |
w.ale_wr;
dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n",