Linux 4.20-rc5

-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwEZdIeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAlQH/19oax2Za3IPqF4X DM3lal5M6zlUVkoYstqzpbR3MqUwgEnMfvoeMDC6mI9N4/+r2LkV7cRR8HzqQCCS jDfD69IzRGb52VSeJmbOrkxBWsR1Nn0t4Z3rEeLPxwaOoNpRc8H973MbAQ2FKMpY S4Y3jIK1dNiRRxdh52NupVkQF+djAUwkBuVk/rrvRJmTDij4la03cuCDAO+Di9lt GHlVvygKw2SJhDR+z3ArwZNmE0ceCcE6+W7zPHzj2KeWuKrZg22kfUD454f2YEIw FG0hu9qecgtpYCkLSm2vr4jQzmpsDoyq3ZfwhjGrP4qtvPC3Db3vL3dbQnkzUcJu JtwhVCE= =O1q1 -----END PGP SIGNATURE----- Merge tag 'v4.20-rc5' into for-4.21/block Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and also getting the merge fix that went into mainline that users are hitting testing for-4.21/block and/or for-next. * tag 'v4.20-rc5': (664 commits) Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace psi: make disabling/enabling easier for vendor kernels proc: fixup map_files test on arm debugobjects: avoid recursive calls with kmemleak userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set ...
2024-12-27 05:11:48 +00:00 · 2018-12-04 09:38:05 -07:00 · 2018-12-04 09:38:05 -07:00 · 89d04ec349
commit 89d04ec349
parent 8c2def893a 2595646791
655 changed files with 7604 additions and 3937 deletions
--- a/4
+++ b/4
@ -2204,6 +2204,10 @@ S: Post Office Box 371
 S: North Little Rock, Arkansas 72115
 S: USA

+N: Christopher Li
+E: sparse@chrisli.org
+D: Sparse maintainer 2009 - 2018
+
 N: Stephan Linz
 E: linz@mazet.de
 E: Stephan.Linz@gmx.de
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@ -856,7 +856,8 @@
 			causing system reset or hang due to sending
 			INIT from AP to BSP.

-	disable_counter_freezing [HW]
+	perf_v4_pmi=	[X86,INTEL]
+			Format: <bool>
 			Disable Intel PMU counter freezing feature.
 			The feature only exists starting from
 			Arch Perfmon v4 (Skylake and newer).
@ -3504,6 +3505,10 @@
 			before loading.
 			See Documentation/blockdev/ramdisk.txt.

+	psi=		[KNL] Enable or disable pressure stall information
+			tracking.
+			Format: <bool>
+
 	psmouse.proto=	[HW,MOUSE] Highest PS2 mouse protocol extension to
 			probe for; one of (bare|imps|exps|lifebook|any).
 	psmouse.rate=	[HW,MOUSE] Set desired mouse report rate, in reports
@ -4194,9 +4199,13 @@

 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
+			The default operation protects the kernel from
+			user space attacks.

-			on   - unconditionally enable
-			off  - unconditionally disable
+			on   - unconditionally enable, implies
+			       spectre_v2_user=on
+			off  - unconditionally disable, implies
+			       spectre_v2_user=off
 			auto - kernel detects whether your CPU model is
 			       vulnerable

@ -4206,6 +4215,12 @@
 			CONFIG_RETPOLINE configuration option, and the
 			compiler with which the kernel was built.

+			Selecting 'on' will also enable the mitigation
+			against user space to user space task attacks.
+
+			Selecting 'off' will disable both the kernel and
+			the user space protections.
+
 			Specific mitigations can also be selected manually:

 			retpoline	  - replace indirect branches
@ -4215,6 +4230,48 @@
 			Not specifying this option is equivalent to
 			spectre_v2=auto.

+	spectre_v2_user=
+			[X86] Control mitigation of Spectre variant 2
+		        (indirect branch speculation) vulnerability between
+		        user space tasks
+
+			on	- Unconditionally enable mitigations. Is
+				  enforced by spectre_v2=on
+
+			off     - Unconditionally disable mitigations. Is
+				  enforced by spectre_v2=off
+
+			prctl   - Indirect branch speculation is enabled,
+				  but mitigation can be enabled via prctl
+				  per thread.  The mitigation control state
+				  is inherited on fork.
+
+			prctl,ibpb
+				- Like "prctl" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different user
+				  space processes.
+
+			seccomp
+				- Same as "prctl" above, but all seccomp
+				  threads will enable the mitigation unless
+				  they explicitly opt out.
+
+			seccomp,ibpb
+				- Like "seccomp" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different
+				  user space processes.
+
+			auto    - Kernel selects the mitigation depending on
+				  the available CPU features and vulnerability.
+
+			Default mitigation:
+			If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+
+			Not specifying this option is equivalent to
+			spectre_v2_user=auto.
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
@ -4713,6 +4770,8 @@
 					prevent spurious wakeup);
 				n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
 					pause after every control message);
+				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
+					delay after resetting its port);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij

 	usbhid.mousepoll=
--- a/Documentation/admin-guide/security-bugs.rst
+++ b/Documentation/admin-guide/security-bugs.rst
@ -32,16 +32,17 @@ Disclosure and embargoed information
 The security list is not a disclosure channel.  For that, see Coordination
 below.

-Once a robust fix has been developed, our preference is to release the
-fix in a timely fashion, treating it no differently than any of the other
-thousands of changes and fixes the Linux kernel project releases every
-month.
+Once a robust fix has been developed, the release process starts.  Fixes
+for publicly known bugs are released immediately.

-However, at the request of the reporter, we will postpone releasing the
-fix for up to 5 business days after the date of the report or after the
-embargo has lifted; whichever comes first.  The only exception to that
-rule is if the bug is publicly known, in which case the preference is to
-release the fix as soon as it's available.
+Although our preference is to release fixes for publicly undisclosed bugs
+as soon as they become available, this may be postponed at the request of
+the reporter or an affected party for up to 7 calendar days from the start
+of the release process, with an exceptional extension to 14 calendar days
+if it is agreed that the criticality of the bug requires more time.  The
+only valid reason for deferring the publication of a fix is to accommodate
+the logistics of QA and large scale rollouts which require release
+coordination.

 Whilst embargoed information may be shared with trusted individuals in
 order to develop a fix, such information will not be published alongside
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@ -57,6 +57,7 @@ stable kernels.
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 | ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
 | ARM            | Cortex-A76      | #1188873        | ARM64_ERRATUM_1188873       |
+| ARM            | Cortex-A76      | #1286807        | ARM64_ERRATUM_1286807       |
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
 |                |                 |                 |                             |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |
--- a/Documentation/core-api/xarray.rst
+++ b/Documentation/core-api/xarray.rst
@ -74,7 +74,8 @@ using :c:func:`xa_load`.  xa_store will overwrite any entry with the
 new entry and return the previous entry stored at that index.  You can
 use :c:func:`xa_erase` instead of calling :c:func:`xa_store` with a
 ``NULL`` entry.  There is no difference between an entry that has never
-been stored to and one that has most recently had ``NULL`` stored to it.
+been stored to, one that has been erased and one that has most recently
+had ``NULL`` stored to it.

 You can conditionally replace an entry at an index by using
 :c:func:`xa_cmpxchg`.  Like :c:func:`cmpxchg`, it will only succeed if
@ -105,23 +106,44 @@ may result in the entry being marked at some, but not all of the other
 indices.  Storing into one index may result in the entry retrieved by
 some, but not all of the other indices changing.

+Sometimes you need to ensure that a subsequent call to :c:func:`xa_store`
+will not need to allocate memory.  The :c:func:`xa_reserve` function
+will store a reserved entry at the indicated index.  Users of the normal
+API will see this entry as containing ``NULL``.  If you do not need to
+use the reserved entry, you can call :c:func:`xa_release` to remove the
+unused entry.  If another user has stored to the entry in the meantime,
+:c:func:`xa_release` will do nothing; if instead you want the entry to
+become ``NULL``, you should use :c:func:`xa_erase`.
+
+If all entries in the array are ``NULL``, the :c:func:`xa_empty` function
+will return ``true``.
+
 Finally, you can remove all entries from an XArray by calling
 :c:func:`xa_destroy`.  If the XArray entries are pointers, you may wish
 to free the entries first.  You can do this by iterating over all present
 entries in the XArray using the :c:func:`xa_for_each` iterator.

-ID assignment
-------------
+Allocating XArrays
+------------------
+
+If you use :c:func:`DEFINE_XARRAY_ALLOC` to define the XArray, or
+initialise it by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`,
+the XArray changes to track whether entries are in use or not.

 You can call :c:func:`xa_alloc` to store the entry at any unused index
 in the XArray.  If you need to modify the array from interrupt context,
 you can use :c:func:`xa_alloc_bh` or :c:func:`xa_alloc_irq` to disable
-interrupts while allocating the ID.  Unlike :c:func:`xa_store`, allocating
-a ``NULL`` pointer does not delete an entry.  Instead it reserves an
-entry like :c:func:`xa_reserve` and you can release it using either
-:c:func:`xa_erase` or :c:func:`xa_release`.  To use ID assignment, the
-XArray must be defined with :c:func:`DEFINE_XARRAY_ALLOC`, or initialised
-by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`,
+interrupts while allocating the ID.
+
+Using :c:func:`xa_store`, :c:func:`xa_cmpxchg` or :c:func:`xa_insert`
+will mark the entry as being allocated.  Unlike a normal XArray, storing
+``NULL`` will mark the entry as being in use, like :c:func:`xa_reserve`.
+To free an entry, use :c:func:`xa_erase` (or :c:func:`xa_release` if
+you only want to free the entry if it's ``NULL``).
+
+You cannot use ``XA_MARK_0`` with an allocating XArray as this mark
+is used to track whether an entry is free or not.  The other marks are
+available for your use.

 Memory allocation
 -----------------
@ -158,6 +180,8 @@ Takes RCU read lock:

 Takes xa_lock internally:
 * :c:func:`xa_store`
+ * :c:func:`xa_store_bh`
+ * :c:func:`xa_store_irq`
 * :c:func:`xa_insert`
 * :c:func:`xa_erase`
 * :c:func:`xa_erase_bh`
@ -167,6 +191,9 @@ Takes xa_lock internally:
 * :c:func:`xa_alloc`
 * :c:func:`xa_alloc_bh`
 * :c:func:`xa_alloc_irq`
+ * :c:func:`xa_reserve`
+ * :c:func:`xa_reserve_bh`
+ * :c:func:`xa_reserve_irq`
 * :c:func:`xa_destroy`
 * :c:func:`xa_set_mark`
 * :c:func:`xa_clear_mark`
@ -177,6 +204,7 @@ Assumes xa_lock held on entry:
 * :c:func:`__xa_erase`
 * :c:func:`__xa_cmpxchg`
 * :c:func:`__xa_alloc`
+ * :c:func:`__xa_reserve`
 * :c:func:`__xa_set_mark`
 * :c:func:`__xa_clear_mark`

@ -234,7 +262,8 @@ Sharing the XArray with interrupt context is also possible, either
 using :c:func:`xa_lock_irqsave` in both the interrupt handler and process
 context, or :c:func:`xa_lock_irq` in process context and :c:func:`xa_lock`
 in the interrupt handler.  Some of the more common patterns have helper
-functions such as :c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`.
+functions such as :c:func:`xa_store_bh`, :c:func:`xa_store_irq`,
+:c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`.

 Sometimes you need to protect access to the XArray with a mutex because
 that lock sits above another mutex in the locking hierarchy.  That does
@ -322,7 +351,8 @@ to :c:func:`xas_retry`, and retry the operation if it returns ``true``.
     - :c:func:`xa_is_zero`
     - Zero entries appear as ``NULL`` through the Normal API, but occupy
       an entry in the XArray which can be used to reserve the index for
-       future use.
+       future use.  This is used by allocating XArrays for allocated entries
+       which are ``NULL``.

 Other internal entries may be added in the future.  As far as possible, they
 will be handled by :c:func:`xas_retry`.
--- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
+++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
@ -17,7 +17,7 @@ Example:
 		reg = <1>;
 		clocks = <&clk32m>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
 	};
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@ -5,6 +5,7 @@ Required properties:
 - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
 	      "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
 	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
+	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@ -14,26 +15,32 @@ Required properties:
 	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
 	      "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
 	      "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
+	      "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
 	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
 	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
 	      compatible device.
-	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
+	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
+	      compatible device.
 	      When compatible with the generic version, nodes must list the
 	      SoC-specific version corresponding to the platform first
 	      followed by the generic version.

 - reg: physical base address and size of the R-Car CAN register map.
 - interrupts: interrupt specifier for the sole interrupt.
- clocks: phandles and clock specifiers for 3 CAN clock inputs.
- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
+- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
+	  devices.
+	  phandles and clock specifiers for 3 CAN clock inputs for every other
+	  SoC.
+- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
+	       3 clock input name strings for every other SoC: "clkp1", "clkp2",
+	       "can_clk".
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".

-Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
-compatible:
-In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
-and can be used by both CAN and CAN FD controller at the same time. It needs to
-be scaled to maximum frequency if any of these controllers use it. This is done
+Required properties for R8A7795, R8A7796 and R8A77965:
+For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
+be used by both CAN and CAN FD controller at the same time. It needs to be
+scaled to maximum frequency if any of these controllers use it. This is done
 using the below properties:

 - assigned-clocks: phandle of clkp2(CANFD) clock.
@ -42,8 +49,9 @@ using the below properties:
 Optional properties:
 - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
 			    <0x0> (default) : Peripheral clock (clkp1)
-			    <0x1> : Peripheral clock (clkp2)
-			    <0x3> : Externally input clock
+			    <0x1> : Peripheral clock (clkp2) (not supported by
+				    RZ/G2 devices)
+			    <0x3> : External input clock

 Example
 -------
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@ -7,7 +7,7 @@ limitations.
 Current Binding
 ---------------

-Switches are true Linux devices and can be probes by any means. Once
+Switches are true Linux devices and can be probed by any means. Once
 probed, they register to the DSA framework, passing a node
 pointer. This node is expected to fulfil the following binding, and
 may contain additional properties as required by the device it is
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@ -40,24 +40,36 @@ Required properties:
 		"ref" for 19.2 MHz ref clk,
 		"com_aux" for phy common block aux clock,
 		"ref_aux" for phy reference aux clock,
+
+		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
-		For "qcom,qmp-v3-usb3-phy" must contain:
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".

 - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
 - reset-names: "phy" for reset of phy block,
 		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset (Optional).
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-		 "phy", "common", "cfg".
-		For "qcom,msm8996-qmp-usb3-phy" must contain
-		 "phy", "common".
+		"cfg" for phy's ahb cfg block reset.
+
 		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-		 "phy", "common".
+			"phy", "common".
+		For "qcom,msm8996-qmp-pcie-phy" must contain:
+			"phy", "common", "cfg".
+		For "qcom,msm8996-qmp-usb3-phy" must contain
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-ufs-phy": no resets are listed.

 - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
 - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@ -79,9 +91,10 @@ Required properties for child node:

 - #phy-cells: must be 0

+Required properties child node of pcie and usb3 qmp phys:
 - clocks: a list of phandles and clock-specifier pairs,
 	   one for each entry in clock-names.
- - clock-names: Must contain following for pcie and usb qmp phys:
+ - clock-names: Must contain following:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
 - clock-output-names: Name of the PHY clock that will be the parent for
 		       the above pipe clock.
@ -91,9 +104,11 @@ Required properties for child node:
 			(or)
 		  "pcie20_phy1_pipe_clk"

+Required properties for child node of PHYs with lane reset, AKA:
+	"qcom,msm8996-qmp-pcie-phy"
 - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
- - reset-names: Must contain following for pcie qmp phys:
+ - reset-names: Must contain following:
 		 "lane<lane-number>" for reset specific to each lane.

 Example:
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
 Required properties:
 - compatible: should be "socionext,uniphier-scssi"
 - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - clocks: A phandle to the clock for the device.
- - resets: A phandle to the reset control for the device.
+ - interrupts: a single interrupt specifier
+ - pinctrl-names: should be "default"
+ - pinctrl-0: pin control state for the default mode
+ - clocks: a phandle to the clock for the device
+ - resets: a phandle to the reset control for the device

 Example:

 spi0: spi@54006000 {
 	compatible = "socionext,uniphier-scssi";
 	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
+	interrupts = <0 39 4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
 	clocks = <&peri_clk 11>;
 	resets = <&peri_rst 11>;
 };
--- a/Documentation/input/event-codes.rst
+++ b/Documentation/input/event-codes.rst
@ -190,16 +190,7 @@ A few EV_REL codes have special meanings:
 * REL_WHEEL, REL_HWHEEL:

  - These codes are used for vertical and horizontal scroll wheels,
-    respectively. The value is the number of "notches" moved on the wheel, the
-    physical size of which varies by device. For high-resolution wheels (which
-    report multiple events for each notch of movement, or do not have notches)
-    this may be an approximation based on the high-resolution scroll events.
-
-* REL_WHEEL_HI_RES:
-
-  - If a vertical scroll wheel supports high-resolution scrolling, this code
-    will be emitted in addition to REL_WHEEL. The value is the (approximate)
-    distance travelled by the user's finger, in microns.
+    respectively.

 EV_ABS
 ------
--- a/Documentation/media/uapi/v4l/dev-meta.rst
+++ b/Documentation/media/uapi/v4l/dev-meta.rst
@ -40,7 +40,7 @@ To use the :ref:`format` ioctls applications set the ``type`` field of the
 the desired operation. Both drivers and applications must set the remainder of
 the :c:type:`v4l2_format` structure to 0.

-.. _v4l2-meta-format:
+.. c:type:: v4l2_meta_format

 .. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}|

--- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
@ -132,6 +132,11 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical
      - ``sdr``
      - Definition of a data format, see :ref:`pixfmt`, used by SDR
 	capture and output devices.
+    * -
+      - struct :c:type:`v4l2_meta_format`
+      - ``meta``
+      - Definition of a metadata format, see :ref:`meta-formats`, used by
+	metadata capture devices.
    * -
      - __u8
      - ``raw_data``\ [200]
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@ -1056,18 +1056,23 @@ The kernel interface functions are as follows:

 	u32 rxrpc_kernel_check_life(struct socket *sock,
 				    struct rxrpc_call *call);
+	void rxrpc_kernel_probe_life(struct socket *sock,
+				     struct rxrpc_call *call);

-     This returns a number that is updated when ACKs are received from the peer
-     (notably including PING RESPONSE ACKs which we can elicit by sending PING
-     ACKs to see if the call still exists on the server).  The caller should
-     compare the numbers of two calls to see if the call is still alive after
-     waiting for a suitable interval.
+     The first function returns a number that is updated when ACKs are received
+     from the peer (notably including PING RESPONSE ACKs which we can elicit by
+     sending PING ACKs to see if the call still exists on the server).  The
+     caller should compare the numbers of two calls to see if the call is still
+     alive after waiting for a suitable interval.

     This allows the caller to work out if the server is still contactable and
     if the call is still alive on the server whilst waiting for the server to
     process a client operation.

-     This function may transmit a PING ACK.
+     The second function causes a ping ACK to be transmitted to try to provoke
+     the peer into responding, which would then cause the value returned by the
+     first function to change.  Note that this must be called in TASK_RUNNING
+     state.

 (*) Get reply timestamp.

--- a/Documentation/userspace-api/spec_ctrl.rst
+++ b/Documentation/userspace-api/spec_ctrl.rst
@ -92,3 +92,12 @@ Speculation misfeature controls
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);
+
+- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes
+                        (Mitigate Spectre V2 style attacks against user processes)
+
+  Invocations:
+   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@ -61,18 +61,6 @@ Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
 	 	to struct boot_params for loading bzImage and ramdisk
 		above 4G in 64bit.

-Protocol 2.13:	(Kernel 3.14) Support 32- and 64-bit flags being set in
-		xloadflags to support booting a 64-bit kernel from 32-bit
-		EFI
-
-Protocol 2.14:	(Kernel 4.20) Added acpi_rsdp_addr holding the physical
-		address of the ACPI RSDP table.
-		The bootloader updates version with:
-		0x8000 | min(kernel-version, bootloader-version)
-		kernel-version being the protocol version supported by
-		the kernel and bootloader-version the protocol version
-		supported by the bootloader.
-
 **** MEMORY LAYOUT

 The traditional memory map for the kernel loader, used for Image or
@ -209,7 +197,6 @@ Offset	Proto	Name		Meaning
 0258/8	2.10+	pref_address	Preferred loading address
 0260/4	2.10+	init_size	Linear memory required during initialization
 0264/4	2.11+	handover_offset	Offset of handover entry point
-0268/8	2.14+	acpi_rsdp_addr	Physical address of RSDP table

 (1) For backwards compatibility, if the setup_sects field contains 0, the
    real value is 4.
@ -322,7 +309,7 @@ Protocol:	2.00+
  Contains the magic number "HdrS" (0x53726448).

 Field name:	version
-Type:		modify
+Type:		read
 Offset/size:	0x206/2
 Protocol:	2.00+

@ -330,12 +317,6 @@ Protocol:	2.00+
  e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
  10.17.

-  Up to protocol version 2.13 this information is only read by the
-  bootloader. From protocol version 2.14 onwards the bootloader will
-  write the used protocol version or-ed with 0x8000 to the field. The
-  used protocol version will be the minimum of the supported protocol
-  versions of the bootloader and the kernel.
-
 Field name:	realmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
@ -763,17 +744,6 @@ Offset/size:	0x264/4

  See EFI HANDOVER PROTOCOL below for more details.

-Field name:	acpi_rsdp_addr
-Type:		write
-Offset/size:	0x268/8
-Protocol:	2.14+
-
-  This field can be set by the boot loader to tell the kernel the
-  physical address of the ACPI RSDP table.
-
-  A value of 0 indicates the kernel should fall back to the standard
-  methods to locate the RSDP.
-

 **** THE IMAGE CHECKSUM

--- a/174
+++ b/174
@ -180,6 +180,7 @@ F:	drivers/net/hamradio/6pack.c

 8169 10/100/1000 GIGABIT ETHERNET DRIVER
 M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
+M:	Heiner Kallweit <hkallweit1@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/realtek/r8169.c
@ -717,7 +718,7 @@ F:	include/linux/mfd/altera-a10sr.h
 F:	include/dt-bindings/reset/altr,rst-mgr-a10sr.h

 ALTERA TRIPLE SPEED ETHERNET DRIVER
-M:	Vince Bridgers <vbridger@opensource.altera.com>
+M:	Thor Thayer <thor.thayer@linux.intel.com>
 L:	netdev@vger.kernel.org
 L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
@ -1922,7 +1923,6 @@ ARM/QUALCOMM SUPPORT
 M:	Andy Gross <andy.gross@linaro.org>
 M:	David Brown <david.brown@linaro.org>
 L:	linux-arm-msm@vger.kernel.org
-L:	linux-soc@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/qcom/
 F:	arch/arm/boot/dts/qcom-*.dts
@ -2490,7 +2490,7 @@ F:	drivers/net/wireless/ath/*
 ATHEROS ATH5K WIRELESS DRIVER
 M:	Jiri Slaby <jirislaby@gmail.com>
 M:	Nick Kossifidis <mickflemm@gmail.com>
-M:	"Luis R. Rodriguez" <mcgrof@do-not-panic.com>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
@ -2800,7 +2800,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
 Q:	https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
 S:	Supported
-F:	arch/x86/net/bpf_jit*
+F:	arch/*/net/*
 F:	Documentation/networking/filter.txt
 F:	Documentation/bpf/
 F:	include/linux/bpf*
@ -2820,6 +2820,67 @@ F:	tools/bpf/
 F:	tools/lib/bpf/
 F:	tools/testing/selftests/bpf/

+BPF JIT for ARM
+M:	Shubham Bansal <illusionist.neo@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/arm/net/
+
+BPF JIT for ARM64
+M:	Daniel Borkmann <daniel@iogearbox.net>
+M:	Alexei Starovoitov <ast@kernel.org>
+M:	Zi Shen Lim <zlim.lnx@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	arch/arm64/net/
+
+BPF JIT for MIPS (32-BIT AND 64-BIT)
+M:	Paul Burton <paul.burton@mips.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/mips/net/
+
+BPF JIT for NFP NICs
+M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/ethernet/netronome/nfp/bpf/
+
+BPF JIT for POWERPC (32-BIT AND 64-BIT)
+M:	Naveen N. Rao <naveen.n.rao@linux.ibm.com>
+M:	Sandipan Das <sandipan@linux.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/powerpc/net/
+
+BPF JIT for S390
+M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
+M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/s390/net/
+X:	arch/s390/net/pnet.c
+
+BPF JIT for SPARC (32-BIT AND 64-BIT)
+M:	David S. Miller <davem@davemloft.net>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/sparc/net/
+
+BPF JIT for X86 32-BIT
+M:	Wang YanQing <udknight@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/x86/net/bpf_jit_comp32.c
+
+BPF JIT for X86 64-BIT
+M:	Alexei Starovoitov <ast@kernel.org>
+M:	Daniel Borkmann <daniel@iogearbox.net>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	arch/x86/net/
+X:	arch/x86/net/bpf_jit_comp32.c
+
 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Michael Chan <michael.chan@broadcom.com>
 L:	netdev@vger.kernel.org
@ -2860,7 +2921,7 @@ F:	drivers/staging/vc04_services
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/mips/brcm/
 F:	arch/mips/bcm47xx/*
@ -2869,7 +2930,6 @@ F:	arch/mips/include/asm/mach-bcm47xx/*
 BROADCOM BCM5301X ARM ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
@ -2924,7 +2984,7 @@ F:	drivers/cpufreq/bmips-cpufreq.c
 BROADCOM BMIPS MIPS ARCHITECTURE
 M:	Kevin Cernekee <cernekee@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
 F:	arch/mips/bmips/*
@ -3015,7 +3075,6 @@ F:	drivers/net/ethernet/broadcom/genet/
 BROADCOM IPROC ARM ARCHITECTURE
 M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/broadcom/cygnus-linux.git
@ -3062,7 +3121,7 @@ F:	include/uapi/rdma/bnxt_re-abi.h

 BROADCOM NVRAM DRIVER
 M:	Rafał Miłecki <zajec5@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	drivers/firmware/broadcom/*

@ -3276,6 +3335,12 @@ F:	include/uapi/linux/caif/
 F:	include/net/caif/
 F:	net/caif/

+CAKE QDISC
+M:	Toke Høiland-Jørgensen <toke@toke.dk>
+L:	cake@lists.bufferbloat.net (moderated for non-subscribers)
+S:	Maintained
+F:	net/sched/sch_cake.c
+
 CALGARY x86-64 IOMMU
 M:	Muli Ben-Yehuda <mulix@mulix.org>
 M:	Jon Mason <jdmason@kudzu.us>
@ -4158,7 +4223,7 @@ F:	net/decnet/

 DECSTATION PLATFORM SUPPORT
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/wiki/DECstation
 S:	Maintained
 F:	arch/mips/dec/
@ -5249,7 +5314,7 @@ EDAC-CAVIUM OCTEON
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	David Daney <david.daney@cavium.com>
 L:	linux-edac@vger.kernel.org
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	drivers/edac/octeon_edac*

@ -5528,6 +5593,7 @@ F:	net/bridge/
 ETHERNET PHY LIBRARY
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Heiner Kallweit <hkallweit1@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-mdio
@ -5766,7 +5832,7 @@ F:	include/uapi/linux/firewire*.h
 F:	tools/firewire/

 FIRMWARE LOADER (request_firmware)
-M:	Luis R. Rodriguez <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware_class/
@ -6299,6 +6365,7 @@ F:	tools/testing/selftests/gpio/

 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
+M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
 L:	linux-gpio@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
 S:	Maintained
@ -7436,6 +7503,20 @@ S:	Maintained
 F:	Documentation/fb/intelfb.txt
 F:	drivers/video/fbdev/intelfb/

+INTEL GPIO DRIVERS
+M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+L:	linux-gpio@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
+F:	drivers/gpio/gpio-ich.c
+F:	drivers/gpio/gpio-intel-mid.c
+F:	drivers/gpio/gpio-lynxpoint.c
+F:	drivers/gpio/gpio-merrifield.c
+F:	drivers/gpio/gpio-ml-ioh.c
+F:	drivers/gpio/gpio-pch.c
+F:	drivers/gpio/gpio-sch.c
+F:	drivers/gpio/gpio-sodaville.c
+
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
 M:	Zhenyu Wang <zhenyuw@linux.intel.com>
 M:	Zhi Wang <zhi.a.wang@intel.com>
@ -7446,12 +7527,6 @@ T:	git https://github.com/intel/gvt-linux.git
 S:	Supported
 F:	drivers/gpu/drm/i915/gvt/

-INTEL PMIC GPIO DRIVER
-R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-S:	Maintained
-F:	drivers/gpio/gpio-*cove.c
-F:	drivers/gpio/gpio-msic.c
-
 INTEL HID EVENT DRIVER
 M:	Alex Hung <alex.hung@canonical.com>
 L:	platform-driver-x86@vger.kernel.org
@ -7539,12 +7614,6 @@ W:	https://01.org/linux-acpi
 S:	Supported
 F:	drivers/platform/x86/intel_menlow.c

-INTEL MERRIFIELD GPIO DRIVER
-M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-L:	linux-gpio@vger.kernel.org
-S:	Maintained
-F:	drivers/gpio/gpio-merrifield.c
-
 INTEL MIC DRIVERS (mic)
 M:	Sudeep Dutt <sudeep.dutt@intel.com>
 M:	Ashutosh Dixit <ashutosh.dixit@intel.com>
@ -7577,6 +7646,13 @@ F:	drivers/platform/x86/intel_punit_ipc.c
 F:	arch/x86/include/asm/intel_pmc_ipc.h
 F:	arch/x86/include/asm/intel_punit_ipc.h

+INTEL PMIC GPIO DRIVERS
+M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
+F:	drivers/gpio/gpio-*cove.c
+F:	drivers/gpio/gpio-msic.c
+
 INTEL MULTIFUNCTION PMIC DEVICE DRIVERS
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 S:	Maintained
@ -7685,7 +7761,7 @@ F:	Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt

 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/sgi/ioc3-eth.c

@ -8056,7 +8132,7 @@ F:	tools/testing/selftests/
 F:	Documentation/dev-tools/kselftest*

 KERNEL USERMODE HELPER
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	kernel/umh.c
@ -8113,7 +8189,7 @@ F:	arch/arm64/kvm/

 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
 M:	James Hogan <jhogan@kernel.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/include/asm/kvm*
@ -8232,7 +8308,7 @@ F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c

 KMOD KERNEL MODULE LOADER - USERMODE HELPER
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	kernel/kmod.c
@ -8286,7 +8362,7 @@ F:	drivers/net/dsa/lantiq_gswip.c

 LANTIQ MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/lantiq
 F:	drivers/soc/lantiq
@ -8849,7 +8925,7 @@ S:	Maintained

 MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
 M:	Rahul Bedarkar <rahulbedarkar89@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/img/pistachio_marduk.dts

@ -9808,7 +9884,7 @@ F:	drivers/dma/at_xdmac.c

 MICROSEMI MIPS SOCS
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/generic/board-ocelot.c
 F:	arch/mips/configs/generic/board-ocelot.config
@ -9848,7 +9924,7 @@ MIPS
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	Paul Burton <paul.burton@mips.com>
 M:	James Hogan <jhogan@kernel.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/
 T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
@ -9861,7 +9937,7 @@ F:	drivers/platform/mips/

 MIPS BOSTON DEVELOPMENT BOARD
 M:	Paul Burton <paul.burton@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/img,boston-clock.txt
 F:	arch/mips/boot/dts/img/boston.dts
@ -9871,7 +9947,7 @@ F:	include/dt-bindings/clock/boston-clock.h

 MIPS GENERIC PLATFORM
 M:	Paul Burton <paul.burton@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/power/mti,mips-cpc.txt
 F:	arch/mips/generic/
@ -9879,7 +9955,7 @@ F:	arch/mips/tools/generic-board-config.sh

 MIPS/LOONGSON1 ARCHITECTURE
 M:	Keguang Zhang <keguang.zhang@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson32/
 F:	arch/mips/include/asm/mach-loongson32/
@ -9888,7 +9964,7 @@ F:	drivers/*/*/*loongson1*

 MIPS/LOONGSON2 ARCHITECTURE
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/fuloong-2e/
 F:	arch/mips/loongson64/lemote-2f/
@ -9898,7 +9974,7 @@ F:	drivers/*/*/*loongson2*

 MIPS/LOONGSON3 ARCHITECTURE
 M:	Huacai Chen <chenhc@lemote.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/
 F:	arch/mips/include/asm/mach-loongson64/
@ -9908,7 +9984,7 @@ F:	drivers/*/*/*loongson3*

 MIPS RINT INSTRUCTION EMULATION
 M:	Aleksandar Markovic <aleksandar.markovic@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/math-emu/sp_rint.c
 F:	arch/mips/math-emu/dp_rint.c
@ -10893,7 +10969,7 @@ F:	include/linux/platform_data/i2c-omap.h

 ONION OMEGA2+ BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/ralink/omega2p.dts

@ -11802,7 +11878,7 @@ F:	drivers/pinctrl/spear/

 PISTACHIO SOC SUPPORT
 M:	James Hartley <james.hartley@sondrel.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Odd Fixes
 F:	arch/mips/pistachio/
 F:	arch/mips/include/asm/mach-pistachio/
@ -11982,7 +12058,7 @@ F:	kernel/printk/
 F:	include/linux/printk.h

 PRISM54 WIRELESS DRIVER
-M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Obsolete
@ -11996,9 +12072,10 @@ S:	Maintained
 F:	fs/proc/
 F:	include/linux/proc_fs.h
 F:	tools/testing/selftests/proc/
+F:	Documentation/filesystems/proc.txt

 PROC SYSCTL
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 M:	Kees Cook <keescook@chromium.org>
 L:	linux-kernel@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
@ -12461,7 +12538,7 @@ F:	drivers/media/usb/rainshadow-cec/*

 RALINK MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/ralink

@ -12481,7 +12558,7 @@ F:	drivers/block/brd.c

 RANCHU VIRTUAL BOARD FOR MIPS
 M:	Miodrag Dinic <miodrag.dinic@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/generic/board-ranchu.c
 F:	arch/mips/configs/generic/board-ranchu.config
@ -13931,6 +14008,7 @@ S:	Supported
 F:	Documentation/devicetree/bindings/sound/
 F:	Documentation/sound/soc/
 F:	sound/soc/
+F:	include/dt-bindings/sound/
 F:	include/sound/soc*

 SOUNDWIRE SUBSYSTEM
@ -13978,11 +14056,10 @@ F:	drivers/tty/serial/sunzilog.h
 F:	drivers/tty/vcc.c

 SPARSE CHECKER
-M:	"Christopher Li" <sparse@chrisli.org>
+M:	"Luc Van Oostenryck" <luc.vanoostenryck@gmail.com>
 L:	linux-sparse@vger.kernel.org
 W:	https://sparse.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/devel/sparse/sparse.git
-T:	git git://git.kernel.org/pub/scm/devel/sparse/chrisl/sparse.git
 S:	Maintained
 F:	include/linux/compiler.h

@ -14079,6 +14156,7 @@ F:	Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt

 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Sasha Levin <sashal@kernel.org>
 L:	stable@vger.kernel.org
 S:	Supported
 F:	Documentation/process/stable-kernel-rules.rst
@ -15216,7 +15294,7 @@ F:	arch/um/os-Linux/drivers/
 TURBOCHANNEL SUBSYSTEM
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 M:	Ralf Baechle <ralf@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Maintained
 F:	drivers/tc/
@ -16037,7 +16115,7 @@ F:	drivers/net/vmxnet3/

 VOCORE VOCORE2 BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/ralink/vocore2.dts

--- a/4
+++ b/4
@ -2,8 +2,8 @@
 VERSION = 4
 PATCHLEVEL = 20
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
-NAME = "People's Front"
+EXTRAVERSION = -rc5
+NAME = Shy Crocodile

 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@ -228,7 +228,7 @@
 	vmmc-supply = <&vmmc_fixed>;
 	bus-width = <4>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
-	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 };

 &mmc3 {
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@ -163,7 +163,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@ -492,12 +492,6 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";

-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@ -129,7 +129,7 @@
 };

 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@ -35,7 +35,7 @@
 * jumpering combinations for the long run.
 */
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@ -10,7 +10,11 @@
 #include "rk3288.dtsi"

 / {
-	memory@0 {
+	/*
+	 * The default coreboot on veyron devices ignores memory@0 nodes
+	 * and would instead create another memory node.
+	 */
+	memory {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@ -314,7 +314,7 @@
 				  0x1 0x0 0x60000000 0x10000000
 				  0x2 0x0 0x70000000 0x10000000
 				  0x3 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&h32ck>;
 			status = "disabled";

 			nand_controller: nand-controller {
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@ -183,9 +183,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 			   unsigned long frame_pointer)
 {
 	unsigned long return_hooker = (unsigned long) &return_to_handler;
-	struct ftrace_graph_ent trace;
 	unsigned long old;
-	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
@ -193,21 +191,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	old = *parent;
 	*parent = return_hooker;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
+	if (function_graph_enter(old, self_addr, frame_pointer, NULL))
 		*parent = old;
-		return;
-	}
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-	if (err == -EBUSY) {
-		*parent = old;
-		return;
-	}
 }

 #ifdef CONFIG_DYNAMIC_FTRACE
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@ -759,7 +759,9 @@ static struct davinci_id da830_ids[] = {
 };

 static struct davinci_gpio_platform_data da830_gpio_platform_data = {
-	.ngpio = 128,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 128,
 };

 int __init da830_register_gpio(void)
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@ -719,7 +719,9 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 }

 static struct davinci_gpio_platform_data da850_gpio_platform_data = {
-	.ngpio = 144,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 144,
 };

 int __init da850_register_gpio(void)
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@ -701,6 +701,46 @@ static struct resource da8xx_gpio_resources[] = {
 	},
 	{ /* interrupt */
 		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO1,
+		.end	= IRQ_DA8XX_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO2,
+		.end	= IRQ_DA8XX_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO3,
+		.end	= IRQ_DA8XX_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO4,
+		.end	= IRQ_DA8XX_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO5,
+		.end	= IRQ_DA8XX_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO6,
+		.end	= IRQ_DA8XX_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO7,
+		.end	= IRQ_DA8XX_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO8,
 		.end	= IRQ_DA8XX_GPIO8,
 		.flags	= IORESOURCE_IRQ,
 	},
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@ -548,12 +548,44 @@ static struct resource dm355_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK1,
+		.end	= IRQ_DM355_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK2,
+		.end	= IRQ_DM355_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK3,
+		.end	= IRQ_DM355_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK4,
+		.end	= IRQ_DM355_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK5,
+		.end	= IRQ_DM355_GPIOBNK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK6,
 		.end	= IRQ_DM355_GPIOBNK6,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 };

--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@ -267,12 +267,49 @@ static struct resource dm365_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO1,
+		.end	= IRQ_DM365_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO2,
+		.end	= IRQ_DM365_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO3,
+		.end	= IRQ_DM365_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO4,
+		.end	= IRQ_DM365_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO5,
+		.end	= IRQ_DM365_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO6,
+		.end	= IRQ_DM365_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO7,
 		.end	= IRQ_DM365_GPIO7,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 	.gpio_unbanked	= 8,
 };
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@ -492,12 +492,34 @@ static struct resource dm644_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK1,
+		.end	= IRQ_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK2,
+		.end	= IRQ_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK3,
+		.end	= IRQ_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK4,
 		.end	= IRQ_GPIOBNK4,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 71,
 };

--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@ -442,12 +442,24 @@ static struct resource dm646x_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK1,
+		.end	= IRQ_DM646X_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK2,
 		.end	= IRQ_DM646X_GPIOBNK2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 43,
 };

--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@ -750,6 +750,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
 	struct modem_private_data *priv = port->private_data;
 	int ret;

+	if (!priv)
+		return;
+
 	if (IS_ERR(priv->regulator))
 		return;

--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@ -351,7 +351,7 @@ static void omap44xx_prm_reconfigure_io_chain(void)
 * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
 * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
 */
-static void __init omap44xx_prm_enable_io_wakeup(void)
+static void omap44xx_prm_enable_io_wakeup(void)
 {
 	s32 inst = omap4_prmst_get_prm_dev_inst();

--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -497,6 +497,24 @@ config ARM64_ERRATUM_1188873

 	  If unsure, say Y.

+config ARM64_ERRATUM_1286807
+	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds workaround for ARM Cortex-A76 erratum 1286807
+
+	  On the affected Cortex-A76 cores (r0p0 to r3p0), if a virtual
+	  address for a cacheable mapping of a location is being
+	  accessed by a core while another core is remapping the virtual
+	  address to a new physical page using the recommended
+	  break-before-make sequence, then under very rare circumstances
+	  TLBI+DSB completes before a read using the translation being
+	  invalidated has been observed by other observers. The
+	  workaround repeats the TLBI+DSB operation.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@ -566,9 +584,16 @@ config QCOM_FALKOR_ERRATUM_1003
 	  is unchanged. Work around the erratum by invalidating the walk cache
 	  entries for the trampoline before entering the kernel proper.

+config ARM64_WORKAROUND_REPEAT_TLBI
+	bool
+	help
+	  Enable the repeat TLBI workaround for Falkor erratum 1009 and
+	  Cortex-A76 erratum 1286807.
+
 config QCOM_FALKOR_ERRATUM_1009
 	bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
 	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
 	help
 	  On Falkor v1, the CPU may prematurely complete a DSB following a
 	  TLBI xxIS invalidate maintenance operation. Repeat the TLBI operation
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@ -241,3 +241,7 @@
 		};
 	};
 };
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@ -352,6 +352,10 @@
 	status = "okay";
 };

+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
 &uart9 {
 	status = "okay";
 };
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@ -153,7 +153,7 @@
 };

 &pcie0 {
-	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@ -57,18 +57,6 @@
 		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 0>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
-
 };

 &cpu_l0 {
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@ -36,7 +36,7 @@

 	wkup_uart0: serial@42300000 {
 		compatible = "ti,am654-uart";
-		reg = <0x00 0x42300000 0x00 0x100>;
+		reg = <0x42300000 0x100>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/include/asm/ftrace.h
+++ b/arch/arm64/include/asm/ftrace.h
@ -56,6 +56,19 @@ static inline bool arch_trace_is_compat_syscall(struct pt_regs *regs)
 {
 	return is_compat_task();
 }
+
+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+
+static inline bool arch_syscall_match_sym_name(const char *sym,
+					       const char *name)
+{
+	/*
+	 * Since all syscall functions have __arm64_ prefix, we must skip it.
+	 * However, as we described above, we decided to ignore compat
+	 * syscalls, so we don't care about __arm64_compat_ prefix here.
+	 */
+	return !strcmp(sym + 8, name);
+}
 #endif /* ifndef __ASSEMBLY__ */

 #endif /* __ASM_FTRACE_H */
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@ -468,7 +468,7 @@
 			 SCTLR_ELx_SA     | SCTLR_ELx_I    | SCTLR_ELx_WXN | \
 			 SCTLR_ELx_DSSBS | ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0)

-#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffff
+#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffffUL
 #error "Inconsistent SCTLR_EL2 set/clear bits"
 #endif

@ -509,7 +509,7 @@
 			 SCTLR_EL1_UMA | SCTLR_ELx_WXN     | ENDIAN_CLEAR_EL1 |\
 			 SCTLR_ELx_DSSBS | SCTLR_EL1_NTWI  | SCTLR_EL1_RES0)

-#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffff
+#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffffUL
 #error "Inconsistent SCTLR_EL1 set/clear bits"
 #endif

--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@ -41,14 +41,14 @@
 		   ALTERNATIVE("nop\n			nop",		       \
 			       "dsb ish\n		tlbi " #op,	       \
 			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
-			       CONFIG_QCOM_FALKOR_ERRATUM_1009)		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
 			    : : )

 #define __TLBI_1(op, arg) asm ("tlbi " #op ", %0\n"			       \
 		   ALTERNATIVE("nop\n			nop",		       \
 			       "dsb ish\n		tlbi " #op ", %0",     \
 			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
-			       CONFIG_QCOM_FALKOR_ERRATUM_1009)		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
 			    : : "r" (arg))

 #define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg)
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@ -570,6 +570,20 @@ static const struct midr_range arm64_harden_el2_vectors[] = {

 #endif

+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
+
+static const struct midr_range arm64_repeat_tlbi_cpus[] = {
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
+	MIDR_RANGE(MIDR_QCOM_FALKOR_V1, 0, 0, 0, 0),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1286807
+	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+#endif
+	{},
+};
+
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #if	defined(CONFIG_ARM64_ERRATUM_826319) || \
 	defined(CONFIG_ARM64_ERRATUM_827319) || \
@ -695,11 +709,11 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.matches = is_kryo_midr,
 	},
 #endif
-#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
 	{
-		.desc = "Qualcomm Technologies Falkor erratum 1009",
+		.desc = "Qualcomm erratum 1009, ARM erratum 1286807",
 		.capability = ARM64_WORKAROUND_REPEAT_TLBI,
-		ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0),
+		ERRATA_MIDR_RANGE_LIST(arm64_repeat_tlbi_cpus),
 	},
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_858921
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@ -1333,7 +1333,6 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.cpu_enable = cpu_enable_hw_dbm,
 	},
 #endif
-#ifdef CONFIG_ARM64_SSBD
 	{
 		.desc = "CRC32 instructions",
 		.capability = ARM64_HAS_CRC32,
@ -1343,6 +1342,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.field_pos = ID_AA64ISAR0_CRC32_SHIFT,
 		.min_field_value = 1,
 	},
+#ifdef CONFIG_ARM64_SSBD
 	{
 		.desc = "Speculative Store Bypassing Safe (SSBS)",
 		.capability = ARM64_SSBS,
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@ -216,8 +216,6 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 {
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
 	unsigned long old;
-	struct ftrace_graph_ent trace;
-	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
@ -229,18 +227,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	 */
 	old = *parent;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-	if (err == -EBUSY)
-		return;
-	else
+	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
 		*parent = return_hooker;
 }

--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@ -351,7 +351,8 @@ static void build_epilogue(struct jit_ctx *ctx)
 * >0 - successfully JITed a 16-byte eBPF instruction.
 * <0 - failed to JIT.
 */
-static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
+static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
+		      bool extra_pass)
 {
 	const u8 code = insn->code;
 	const u8 dst = bpf2a64[insn->dst_reg];
@ -625,12 +626,19 @@ emit_cond_jmp:
 	case BPF_JMP | BPF_CALL:
 	{
 		const u8 r0 = bpf2a64[BPF_REG_0];
-		const u64 func = (u64)__bpf_call_base + imm;
+		bool func_addr_fixed;
+		u64 func_addr;
+		int ret;

-		if (ctx->prog->is_func)
-			emit_addr_mov_i64(tmp, func, ctx);
+		ret = bpf_jit_get_func_addr(ctx->prog, insn, extra_pass,
+					    &func_addr, &func_addr_fixed);
+		if (ret < 0)
+			return ret;
+		if (func_addr_fixed)
+			/* We can use optimized emission here. */
+			emit_a64_mov_i64(tmp, func_addr, ctx);
 		else
-			emit_a64_mov_i64(tmp, func, ctx);
+			emit_addr_mov_i64(tmp, func_addr, ctx);
 		emit(A64_BLR(tmp), ctx);
 		emit(A64_MOV(1, r0, A64_R(0)), ctx);
 		break;
@ -753,7 +761,7 @@ emit_cond_jmp:
 	return 0;
 }

-static int build_body(struct jit_ctx *ctx)
+static int build_body(struct jit_ctx *ctx, bool extra_pass)
 {
 	const struct bpf_prog *prog = ctx->prog;
 	int i;
@ -762,7 +770,7 @@ static int build_body(struct jit_ctx *ctx)
 		const struct bpf_insn *insn = &prog->insnsi[i];
 		int ret;

-		ret = build_insn(insn, ctx);
+		ret = build_insn(insn, ctx, extra_pass);
 		if (ret > 0) {
 			i++;
 			if (ctx->image == NULL)
@ -858,7 +866,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	/* 1. Initial fake pass to compute ctx->idx. */

 	/* Fake pass to fill in ctx->offset. */
-	if (build_body(&ctx)) {
+	if (build_body(&ctx, extra_pass)) {
 		prog = orig_prog;
 		goto out_off;
 	}
@ -888,7 +896,7 @@ skip_init_ctx:

 	build_prologue(&ctx, was_classic);

-	if (build_body(&ctx)) {
+	if (build_body(&ctx, extra_pass)) {
 		bpf_jit_binary_free(header);
 		prog = orig_prog;
 		goto out_off;
--- a/arch/ia64/include/asm/numa.h
+++ b/arch/ia64/include/asm/numa.h
@ -59,7 +59,9 @@ extern struct node_cpuid_s node_cpuid[NR_CPUS];
 */

 extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
-#define node_distance(from,to) (numa_slit[(from) * MAX_NUMNODES + (to)])
+#define slit_distance(from,to) (numa_slit[(from) * MAX_NUMNODES + (to)])
+extern int __node_distance(int from, int to);
+#define node_distance(from,to) __node_distance(from, to)

 extern int paddr_to_nid(unsigned long paddr);

--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@ -578,8 +578,8 @@ void __init acpi_numa_fixup(void)
 	if (!slit_table) {
 		for (i = 0; i < MAX_NUMNODES; i++)
 			for (j = 0; j < MAX_NUMNODES; j++)
-				node_distance(i, j) = i == j ? LOCAL_DISTANCE :
-							REMOTE_DISTANCE;
+				slit_distance(i, j) = i == j ?
+					LOCAL_DISTANCE : REMOTE_DISTANCE;
 		return;
 	}

@ -592,7 +592,7 @@ void __init acpi_numa_fixup(void)
 			if (!pxm_bit_test(j))
 				continue;
 			node_to = pxm_to_node(j);
-			node_distance(node_from, node_to) =
+			slit_distance(node_from, node_to) =
 			    slit_table->entry[i * slit_table->locality_count + j];
 		}
 	}
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@ -36,6 +36,12 @@ struct node_cpuid_s node_cpuid[NR_CPUS] =
 */
 u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];

+int __node_distance(int from, int to)
+{
+	return slit_distance(from, to);
+}
+EXPORT_SYMBOL(__node_distance);
+
 /* Identify which cnode a physical address resides on */
 int
 paddr_to_nid(unsigned long paddr)
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@ -22,8 +22,7 @@
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 {
 	unsigned long old;
-	int faulted, err;
-	struct ftrace_graph_ent trace;
+	int faulted;
 	unsigned long return_hooker = (unsigned long)
 				&return_to_handler;

@ -63,18 +62,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}

-	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0, NULL);
-	if (err == -EBUSY) {
+	if (function_graph_enter(old, self_addr, 0, NULL))
 		*parent = old;
-		return;
-	}
-
-	trace.func = self_addr;
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		*parent = old;
-	}
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */

--- a/arch/mips/configs/cavium_octeon_defconfig
+++ b/arch/mips/configs/cavium_octeon_defconfig
@ -140,6 +140,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_STAGING=y
 CONFIG_OCTEON_ETHERNET=y
+CONFIG_OCTEON_USB=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_RAS=y
 CONFIG_EXT4_FS=y
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@ -73,7 +73,7 @@ static inline unsigned long mips_get_syscall_arg(unsigned long *arg,
 #ifdef CONFIG_64BIT
 	case 4: case 5: case 6: case 7:
 #ifdef CONFIG_MIPS32_O32
-		if (test_thread_flag(TIF_32BIT_REGS))
+		if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
 			return get_user(*arg, (int *)usp + n);
 		else
 #endif
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@ -322,7 +322,6 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 			   unsigned long fp)
 {
 	unsigned long old_parent_ra;
-	struct ftrace_graph_ent trace;
 	unsigned long return_hooker = (unsigned long)
 	    &return_to_handler;
 	int faulted, insns;
@ -369,12 +368,6 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	if (unlikely(faulted))
 		goto out;

-	if (ftrace_push_return_trace(old_parent_ra, self_ra, &trace.depth, fp,
-				     NULL) == -EBUSY) {
-		*parent_ra_addr = old_parent_ra;
-		return;
-	}
-
 	/*
 	 * Get the recorded ip of the current mcount calling site in the
 	 * __mcount_loc section, which will be used to filter the function
@ -382,13 +375,10 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	 */

 	insns = core_kernel_text(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
-	trace.func = self_ra - (MCOUNT_INSN_SIZE * insns);
+	self_ra -= (MCOUNT_INSN_SIZE * insns);

-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
+	if (function_graph_enter(old_parent_ra, self_ra, fp, NULL))
 		*parent_ra_addr = old_parent_ra;
-	}
 	return;
 out:
 	ftrace_graph_stop();
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@ -794,6 +794,7 @@ static void __init arch_mem_init(char **cmdline_p)

 	/* call board setup routine */
 	plat_mem_setup();
+	memblock_set_bottom_up(true);

 	/*
 	 * Make sure all kernel memory is in the maps.  The "UP" and
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@ -2260,10 +2260,8 @@ void __init trap_init(void)
 		unsigned long size = 0x200 + VECTORSPACING*64;
 		phys_addr_t ebase_pa;

-		memblock_set_bottom_up(true);
 		ebase = (unsigned long)
 			memblock_alloc_from(size, 1 << fls(size), 0);
-		memblock_set_bottom_up(false);

 		/*
 		 * Try to ensure ebase resides in KSeg0 if possible.
@ -2307,6 +2305,7 @@ void __init trap_init(void)
 	if (board_ebase_setup)
 		board_ebase_setup();
 	per_cpu_trap_init(true);
+	memblock_set_bottom_up(false);

 	/*
 	 * Copy the generic exception handlers to their final destination.
--- a/arch/mips/loongson64/loongson-3/numa.c
+++ b/arch/mips/loongson64/loongson-3/numa.c
@ -231,6 +231,8 @@ static __init void prom_meminit(void)
 			cpumask_clear(&__node_data[(node)]->cpumask);
 		}
 	}
+	max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());
+
 	for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) {
 		node = cpu / loongson_sysconf.cores_per_node;
 		if (node >= num_online_nodes())
@ -248,19 +250,9 @@ static __init void prom_meminit(void)

 void __init paging_init(void)
 {
-	unsigned node;
 	unsigned long zones_size[MAX_NR_ZONES] = {0, };

 	pagetable_init();
-
-	for_each_online_node(node) {
-		unsigned long  start_pfn, end_pfn;
-
-		get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
-
-		if (end_pfn > max_low_pfn)
-			max_low_pfn = end_pfn;
-	}
 #ifdef CONFIG_ZONE_DMA32
 	zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
 #endif
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@ -84,7 +84,7 @@ static struct rt2880_pmx_func pcie_rst_grp[] = {
 };
 static struct rt2880_pmx_func nd_sd_grp[] = {
 	FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
-	FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
+	FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
 };

 static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@ -435,6 +435,7 @@ void __init prom_meminit(void)

 	mlreset();
 	szmem();
+	max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());

 	for (node = 0; node < MAX_COMPACT_NODES; node++) {
 		if (node_online(node)) {
@ -455,18 +456,8 @@ extern void setup_zero_pages(void);
 void __init paging_init(void)
 {
 	unsigned long zones_size[MAX_NR_ZONES] = {0, };
-	unsigned node;

 	pagetable_init();
-
-	for_each_online_node(node) {
-		unsigned long start_pfn, end_pfn;
-
-		get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
-
-		if (end_pfn > max_low_pfn)
-			max_low_pfn = end_pfn;
-	}
 	zones_size[ZONE_NORMAL] = max_low_pfn;
 	free_area_init_nodes(zones_size);
 }
--- a/arch/nds32/kernel/ftrace.c
+++ b/arch/nds32/kernel/ftrace.c
@ -211,29 +211,15 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 			   unsigned long frame_pointer)
 {
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
-	struct ftrace_graph_ent trace;
 	unsigned long old;
-	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;

 	old = *parent;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-
-	if (err == -EBUSY)
-		return;
-
-	*parent = return_hooker;
+	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
+		*parent = return_hooker;
 }

 noinline void ftrace_graph_caller(void)
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@ -30,7 +30,6 @@ static void __hot prepare_ftrace_return(unsigned long *parent,
 					unsigned long self_addr)
 {
 	unsigned long old;
-	struct ftrace_graph_ent trace;
 	extern int parisc_return_to_handler;

 	if (unlikely(ftrace_graph_is_dead()))
@ -41,19 +40,9 @@ static void __hot prepare_ftrace_return(unsigned long *parent,

 	old = *parent;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-        if (ftrace_push_return_trace(old, self_addr, &trace.depth,
-				     0, NULL) == -EBUSY)
-                return;
-
-	/* activate parisc_return_to_handler() as return point */
-	*parent = (unsigned long) &parisc_return_to_handler;
+	if (!function_graph_enter(old, self_addr, 0, NULL))
+		/* activate parisc_return_to_handler() as return point */
+		*parent = (unsigned long) &parisc_return_to_handler;
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */

--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@ -950,7 +950,6 @@ int ftrace_disable_ftrace_graph_caller(void)
 */
 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 {
-	struct ftrace_graph_ent trace;
 	unsigned long return_hooker;

 	if (unlikely(ftrace_graph_is_dead()))
@ -961,18 +960,8 @@ unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)

 	return_hooker = ppc_function_entry(return_to_handler);

-	trace.func = ip;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		goto out;
-
-	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0,
-				     NULL) == -EBUSY)
-		goto out;
-
-	parent = return_hooker;
+	if (!function_graph_enter(parent, ip, 0, NULL))
+		parent = return_hooker;
 out:
 	return parent;
 }
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@ -983,6 +983,7 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu)
 		ret = kvmhv_enter_nested_guest(vcpu);
 		if (ret == H_INTERRUPT) {
 			kvmppc_set_gpr(vcpu, 3, 0);
+			vcpu->arch.hcall_needed = 0;
 			return -EINTR;
 		}
 		break;
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@ -166,7 +166,33 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
 	PPC_BLR();
 }

-static void bpf_jit_emit_func_call(u32 *image, struct codegen_context *ctx, u64 func)
+static void bpf_jit_emit_func_call_hlp(u32 *image, struct codegen_context *ctx,
+				       u64 func)
+{
+#ifdef PPC64_ELF_ABI_v1
+	/* func points to the function descriptor */
+	PPC_LI64(b2p[TMP_REG_2], func);
+	/* Load actual entry point from function descriptor */
+	PPC_BPF_LL(b2p[TMP_REG_1], b2p[TMP_REG_2], 0);
+	/* ... and move it to LR */
+	PPC_MTLR(b2p[TMP_REG_1]);
+	/*
+	 * Load TOC from function descriptor at offset 8.
+	 * We can clobber r2 since we get called through a
+	 * function pointer (so caller will save/restore r2)
+	 * and since we don't use a TOC ourself.
+	 */
+	PPC_BPF_LL(2, b2p[TMP_REG_2], 8);
+#else
+	/* We can clobber r12 */
+	PPC_FUNC_ADDR(12, func);
+	PPC_MTLR(12);
+#endif
+	PPC_BLRL();
+}
+
+static void bpf_jit_emit_func_call_rel(u32 *image, struct codegen_context *ctx,
+				       u64 func)
 {
 	unsigned int i, ctx_idx = ctx->idx;

@ -273,7 +299,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 {
 	const struct bpf_insn *insn = fp->insnsi;
 	int flen = fp->len;
-	int i;
+	int i, ret;

 	/* Start of epilogue code - will only be valid 2nd pass onwards */
 	u32 exit_addr = addrs[flen];
@ -284,8 +310,9 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 		u32 src_reg = b2p[insn[i].src_reg];
 		s16 off = insn[i].off;
 		s32 imm = insn[i].imm;
+		bool func_addr_fixed;
+		u64 func_addr;
 		u64 imm64;
-		u8 *func;
 		u32 true_cond;
 		u32 tmp_idx;

@ -711,23 +738,15 @@ emit_clear:
 		case BPF_JMP | BPF_CALL:
 			ctx->seen |= SEEN_FUNC;

-			/* bpf function call */
-			if (insn[i].src_reg == BPF_PSEUDO_CALL)
-				if (!extra_pass)
-					func = NULL;
-				else if (fp->aux->func && off < fp->aux->func_cnt)
-					/* use the subprog id from the off
-					 * field to lookup the callee address
-					 */
-					func = (u8 *) fp->aux->func[off]->bpf_func;
-				else
-					return -EINVAL;
-			/* kernel helper call */
+			ret = bpf_jit_get_func_addr(fp, &insn[i], extra_pass,
+						    &func_addr, &func_addr_fixed);
+			if (ret < 0)
+				return ret;
+
+			if (func_addr_fixed)
+				bpf_jit_emit_func_call_hlp(image, ctx, func_addr);
 			else
-				func = (u8 *) __bpf_call_base + imm;
-
-			bpf_jit_emit_func_call(image, ctx, (u64)func);
-
+				bpf_jit_emit_func_call_rel(image, ctx, func_addr);
 			/* move return value from r3 to BPF_REG_0 */
 			PPC_MR(b2p[BPF_REG_0], 3);
 			break;
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@ -71,6 +71,10 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
 # arch specific predefines for sparse
 CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)

+# Default target when executing plain make
+boot		:= arch/riscv/boot
+KBUILD_IMAGE	:= $(boot)/Image.gz
+
 head-y := arch/riscv/kernel/head.o

 core-y += arch/riscv/kernel/ arch/riscv/mm/
@ -81,4 +85,13 @@ PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@

-all: vmlinux
+all: Image.gz
+
+Image: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+Image.%: Image
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+zinstall install:
+	$(Q)$(MAKE) $(build)=$(boot) $@
--- a/arch/riscv/boot/.gitignore
+++ b/arch/riscv/boot/.gitignore
@ -0,0 +1,2 @@
+Image
+Image.gz
--- a/arch/riscv/boot/Makefile
+++ b/arch/riscv/boot/Makefile
@ -0,0 +1,33 @@
+#
+# arch/riscv/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2018, Anup Patel.
+# Author: Anup Patel <anup@brainfault.org>
+#
+# Based on the ia64 and arm64 boot/Makefile.
+#
+
+OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+targets := Image
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/Image.gz: $(obj)/Image FORCE
+	$(call if_changed,gzip)
+
+install:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(obj)/Image System.map "$(INSTALL_PATH)"
+
+zinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(obj)/Image.gz System.map "$(INSTALL_PATH)"
--- a/arch/riscv/boot/install.sh
+++ b/arch/riscv/boot/install.sh
@ -0,0 +1,60 @@
+#!/bin/sh
+#
+# arch/riscv/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for the RISC-V Linux port
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+#
+
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
+# User may have a custom install script
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+
+if [ "$(basename $2)" = "Image.gz" ]; then
+# Compressed install
+  echo "Installing compressed kernel"
+  base=vmlinuz
+else
+# Normal install
+  echo "Installing normal kernel"
+  base=vmlinux
+fi
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
--- a/arch/riscv/include/asm/module.h
+++ b/arch/riscv/include/asm/module.h
@ -8,6 +8,7 @@

 #define MODULE_ARCH_VERMAGIC    "riscv"

+struct module;
 u64 module_emit_got_entry(struct module *mod, u64 val);
 u64 module_emit_plt_entry(struct module *mod, u64 val);

--- a/arch/riscv/include/asm/uaccess.h
+++ b/arch/riscv/include/asm/uaccess.h
@ -400,13 +400,13 @@ extern unsigned long __must_check __asm_copy_from_user(void *to,
 static inline unsigned long
 raw_copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	return __asm_copy_to_user(to, from, n);
+	return __asm_copy_from_user(to, from, n);
 }

 static inline unsigned long
 raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	return __asm_copy_from_user(to, from, n);
+	return __asm_copy_to_user(to, from, n);
 }

 extern long strncpy_from_user(char *dest, const char __user *src, long count);
--- a/arch/riscv/include/asm/unistd.h
+++ b/arch/riscv/include/asm/unistd.h
@ -13,10 +13,9 @@

 /*
 * There is explicitly no include guard here because this file is expected to
- * be included multiple times.  See uapi/asm/syscalls.h for more info.
+ * be included multiple times.
 */

-#define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_SYS_CLONE
+
 #include <uapi/asm/unistd.h>
-#include <uapi/asm/syscalls.h>
--- a/arch/riscv/include/uapi/asm/syscalls.h
+++ b/arch/riscv/include/uapi/asm/syscalls.h
@ -1,13 +1,25 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 /*
- * Copyright (C) 2017-2018 SiFive
+ * Copyright (C) 2018 David Abdurachmanov <david.abdurachmanov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

-/*
- * There is explicitly no include guard here because this file is expected to
- * be included multiple times in order to define the syscall macros via
- * __SYSCALL.
- */
+#ifdef __LP64__
+#define __ARCH_WANT_NEW_STAT
+#endif /* __LP64__ */
+
+#include <asm-generic/unistd.h>

 /*
 * Allows the instruction cache to be flushed from userspace.  Despite RISC-V
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@ -64,7 +64,7 @@ int riscv_of_processor_hartid(struct device_node *node)

 static void print_isa(struct seq_file *f, const char *orig_isa)
 {
-	static const char *ext = "mafdc";
+	static const char *ext = "mafdcsu";
 	const char *isa = orig_isa;
 	const char *e;

@ -88,11 +88,14 @@ static void print_isa(struct seq_file *f, const char *orig_isa)
 	/*
 	 * Check the rest of the ISA string for valid extensions, printing those
 	 * we find.  RISC-V ISA strings define an order, so we only print the
-	 * extension bits when they're in order.
+	 * extension bits when they're in order. Hide the supervisor (S)
+	 * extension from userspace as it's not accessible from there.
 	 */
 	for (e = ext; *e != '\0'; ++e) {
 		if (isa[0] == e[0]) {
-			seq_write(f, isa, 1);
+			if (isa[0] != 's')
+				seq_write(f, isa, 1);
+
 			isa++;
 		}
 	}
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@ -132,7 +132,6 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 {
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
 	unsigned long old;
-	struct ftrace_graph_ent trace;
 	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
@ -144,17 +143,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	 */
 	old = *parent;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, parent);
-	if (err == -EBUSY)
-		return;
-	*parent = return_hooker;
+	if (function_graph_enter(old, self_addr, frame_pointer, parent))
+		*parent = return_hooker;
 }

 #ifdef CONFIG_DYNAMIC_FTRACE
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@ -44,6 +44,16 @@ ENTRY(_start)
 	amoadd.w a3, a2, (a3)
 	bnez a3, .Lsecondary_start

+	/* Clear BSS for flat non-ELF images */
+	la a3, __bss_start
+	la a4, __bss_stop
+	ble a4, a3, clear_bss_done
+clear_bss:
+	REG_S zero, (a3)
+	add a3, a3, RISCV_SZPTR
+	blt a3, a4, clear_bss
+clear_bss_done:
+
 	/* Save hart ID and DTB physical address */
 	mv s0, a0
 	mv s1, a1
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@ -74,7 +74,7 @@ SECTIONS
 		*(.sbss*)
 	}

-	BSS_SECTION(0, 0, 0)
+	BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)

 	EXCEPTION_TABLE(0x10)
 	NOTES
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@ -203,22 +203,13 @@ device_initcall(ftrace_plt_init);
 */
 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 {
-	struct ftrace_graph_ent trace;
-
 	if (unlikely(ftrace_graph_is_dead()))
 		goto out;
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
 	ip -= MCOUNT_INSN_SIZE;
-	trace.func = ip;
-	trace.depth = current->curr_ret_stack + 1;
-	/* Only trace if the calling function expects to. */
-	if (!ftrace_graph_entry(&trace))
-		goto out;
-	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0,
-				     NULL) == -EBUSY)
-		goto out;
-	parent = (unsigned long) return_to_handler;
+	if (!function_graph_enter(parent, ip, 0, NULL))
+		parent = (unsigned long) return_to_handler;
 out:
 	return parent;
 }
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@ -346,6 +346,8 @@ static int __hw_perf_event_init(struct perf_event *event)
 		break;

 	case PERF_TYPE_HARDWARE:
+		if (is_sampling_event(event))	/* No sampling support */
+			return -ENOENT;
 		ev = attr->config;
 		/* Count user space (problem-state) only */
 		if (!attr->exclude_user && attr->exclude_kernel) {
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@ -131,6 +131,7 @@ void crst_table_downgrade(struct mm_struct *mm)
 	}

 	pgd = mm->pgd;
+	mm_dec_nr_pmds(mm);
 	mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
 	mm->context.asce_limit = _REGION3_SIZE;
 	mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@ -321,8 +321,7 @@ int ftrace_disable_ftrace_graph_caller(void)
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 {
 	unsigned long old;
-	int faulted, err;
-	struct ftrace_graph_ent trace;
+	int faulted;
 	unsigned long return_hooker = (unsigned long)&return_to_handler;

 	if (unlikely(ftrace_graph_is_dead()))
@ -365,18 +364,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}

-	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0, NULL);
-	if (err == -EBUSY) {
+	if (function_graph_enter(old, self_addr, 0, NULL))
 		__raw_writel(old, parent);
-		return;
-	}
-
-	trace.func = self_addr;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		__raw_writel(old, parent);
-	}
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
--- a/arch/sparc/kernel/ftrace.c
+++ b/arch/sparc/kernel/ftrace.c
@ -126,20 +126,11 @@ unsigned long prepare_ftrace_return(unsigned long parent,
 				    unsigned long frame_pointer)
 {
 	unsigned long return_hooker = (unsigned long) &return_to_handler;
-	struct ftrace_graph_ent trace;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return parent + 8UL;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return parent + 8UL;
-
-	if (ftrace_push_return_trace(parent, self_addr, &trace.depth,
-				     frame_pointer, NULL) == -EBUSY)
+	if (function_graph_enter(parent, self_addr, frame_pointer, NULL))
 		return parent + 8UL;

 	return return_hooker;
--- a/arch/sparc/net/bpf_jit_comp_64.c
+++ b/arch/sparc/net/bpf_jit_comp_64.c
@ -791,7 +791,7 @@ static int emit_compare_and_branch(const u8 code, const u8 dst, u8 src,
 }

 /* Just skip the save instruction and the ctx register move.  */
-#define BPF_TAILCALL_PROLOGUE_SKIP	16
+#define BPF_TAILCALL_PROLOGUE_SKIP	32
 #define BPF_TAILCALL_CNT_SP_OFF		(STACK_BIAS + 128)

 static void build_prologue(struct jit_ctx *ctx)
@ -824,9 +824,15 @@ static void build_prologue(struct jit_ctx *ctx)
 		const u8 vfp = bpf2sparc[BPF_REG_FP];

 		emit(ADD | IMMED | RS1(FP) | S13(STACK_BIAS) | RD(vfp), ctx);
+	} else {
+		emit_nop(ctx);
 	}

 	emit_reg_move(I0, O0, ctx);
+	emit_reg_move(I1, O1, ctx);
+	emit_reg_move(I2, O2, ctx);
+	emit_reg_move(I3, O3, ctx);
+	emit_reg_move(I4, O4, ctx);
 	/* If you add anything here, adjust BPF_TAILCALL_PROLOGUE_SKIP above. */
 }

@ -1270,6 +1276,9 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		const u8 tmp2 = bpf2sparc[TMP_REG_2];
 		u32 opcode = 0, rs2;

+		if (insn->dst_reg == BPF_REG_FP)
+			ctx->saw_frame_pointer = true;
+
 		ctx->tmp_2_used = true;
 		emit_loadimm(imm, tmp2, ctx);

@ -1308,6 +1317,9 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		const u8 tmp = bpf2sparc[TMP_REG_1];
 		u32 opcode = 0, rs2;

+		if (insn->dst_reg == BPF_REG_FP)
+			ctx->saw_frame_pointer = true;
+
 		switch (BPF_SIZE(code)) {
 		case BPF_W:
 			opcode = ST32;
@ -1340,6 +1352,9 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		const u8 tmp2 = bpf2sparc[TMP_REG_2];
 		const u8 tmp3 = bpf2sparc[TMP_REG_3];

+		if (insn->dst_reg == BPF_REG_FP)
+			ctx->saw_frame_pointer = true;
+
 		ctx->tmp_1_used = true;
 		ctx->tmp_2_used = true;
 		ctx->tmp_3_used = true;
@ -1360,6 +1375,9 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		const u8 tmp2 = bpf2sparc[TMP_REG_2];
 		const u8 tmp3 = bpf2sparc[TMP_REG_3];

+		if (insn->dst_reg == BPF_REG_FP)
+			ctx->saw_frame_pointer = true;
+
 		ctx->tmp_1_used = true;
 		ctx->tmp_2_used = true;
 		ctx->tmp_3_used = true;
@ -1425,12 +1443,12 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	struct bpf_prog *tmp, *orig_prog = prog;
 	struct sparc64_jit_data *jit_data;
 	struct bpf_binary_header *header;
+	u32 prev_image_size, image_size;
 	bool tmp_blinded = false;
 	bool extra_pass = false;
 	struct jit_ctx ctx;
-	u32 image_size;
 	u8 *image_ptr;
-	int pass;
+	int pass, i;

 	if (!prog->jit_requested)
 		return orig_prog;
@ -1461,27 +1479,52 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		header = jit_data->header;
 		extra_pass = true;
 		image_size = sizeof(u32) * ctx.idx;
+		prev_image_size = image_size;
+		pass = 1;
 		goto skip_init_ctx;
 	}

 	memset(&ctx, 0, sizeof(ctx));
 	ctx.prog = prog;

-	ctx.offset = kcalloc(prog->len, sizeof(unsigned int), GFP_KERNEL);
+	ctx.offset = kmalloc_array(prog->len, sizeof(unsigned int), GFP_KERNEL);
 	if (ctx.offset == NULL) {
 		prog = orig_prog;
 		goto out_off;
 	}

-	/* Fake pass to detect features used, and get an accurate assessment
-	 * of what the final image size will be.
+	/* Longest sequence emitted is for bswap32, 12 instructions.  Pre-cook
+	 * the offset array so that we converge faster.
 	 */
-	if (build_body(&ctx)) {
-		prog = orig_prog;
-		goto out_off;
+	for (i = 0; i < prog->len; i++)
+		ctx.offset[i] = i * (12 * 4);
+
+	prev_image_size = ~0U;
+	for (pass = 1; pass < 40; pass++) {
+		ctx.idx = 0;
+
+		build_prologue(&ctx);
+		if (build_body(&ctx)) {
+			prog = orig_prog;
+			goto out_off;
+		}
+		build_epilogue(&ctx);
+
+		if (bpf_jit_enable > 1)
+			pr_info("Pass %d: size = %u, seen = [%c%c%c%c%c%c]\n", pass,
+				ctx.idx * 4,
+				ctx.tmp_1_used ? '1' : ' ',
+				ctx.tmp_2_used ? '2' : ' ',
+				ctx.tmp_3_used ? '3' : ' ',
+				ctx.saw_frame_pointer ? 'F' : ' ',
+				ctx.saw_call ? 'C' : ' ',
+				ctx.saw_tail_call ? 'T' : ' ');
+
+		if (ctx.idx * 4 == prev_image_size)
+			break;
+		prev_image_size = ctx.idx * 4;
+		cond_resched();
 	}
-	build_prologue(&ctx);
-	build_epilogue(&ctx);

 	/* Now we know the actual image size. */
 	image_size = sizeof(u32) * ctx.idx;
@ -1494,28 +1537,24 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)

 	ctx.image = (u32 *)image_ptr;
 skip_init_ctx:
-	for (pass = 1; pass < 3; pass++) {
-		ctx.idx = 0;
+	ctx.idx = 0;

-		build_prologue(&ctx);
+	build_prologue(&ctx);

-		if (build_body(&ctx)) {
-			bpf_jit_binary_free(header);
-			prog = orig_prog;
-			goto out_off;
-		}
+	if (build_body(&ctx)) {
+		bpf_jit_binary_free(header);
+		prog = orig_prog;
+		goto out_off;
+	}

-		build_epilogue(&ctx);
+	build_epilogue(&ctx);

-		if (bpf_jit_enable > 1)
-			pr_info("Pass %d: shrink = %d, seen = [%c%c%c%c%c%c]\n", pass,
-				image_size - (ctx.idx * 4),
-				ctx.tmp_1_used ? '1' : ' ',
-				ctx.tmp_2_used ? '2' : ' ',
-				ctx.tmp_3_used ? '3' : ' ',
-				ctx.saw_frame_pointer ? 'F' : ' ',
-				ctx.saw_call ? 'C' : ' ',
-				ctx.saw_tail_call ? 'T' : ' ');
+	if (ctx.idx * 4 != prev_image_size) {
+		pr_err("bpf_jit: Failed to converge, prev_size=%u size=%d\n",
+		       prev_image_size, ctx.idx * 4);
+		bpf_jit_binary_free(header);
+		prog = orig_prog;
+		goto out_off;
 	}

 	if (bpf_jit_enable > 1)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@ -444,10 +444,6 @@ config RETPOLINE
 	  branches. Requires a compiler with -mindirect-branch=thunk-extern
 	  support for full protection. The kernel may run slower.

-	  Without compiler support, at least indirect branches in assembler
-	  code are eliminated. Since this includes the syscall entry path,
-	  it is not entirely pointless.
-
 config INTEL_RDT
 	bool "Intel Resource Director Technology support"
 	depends on X86 && CPU_SUP_INTEL
@ -1004,13 +1000,7 @@ config NR_CPUS
 	  to the kernel image.

 config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on SMP
-	---help---
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with Intel Pentium 4 chips with HyperThreading at a
-	  cost of slightly increased overhead in some places. If unsure say
-	  N here.
+	def_bool y if SMP

 config SCHED_MC
 	def_bool y
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@ -220,9 +220,10 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables

 # Avoid indirect branches in kernel to deal with Spectre
 ifdef CONFIG_RETPOLINE
-ifneq ($(RETPOLINE_CFLAGS),)
-  KBUILD_CFLAGS += $(RETPOLINE_CFLAGS) -DRETPOLINE
+ifeq ($(RETPOLINE_CFLAGS),)
+  $(error You are building kernel with non-retpoline compiler, please update your compiler.)
 endif
+  KBUILD_CFLAGS += $(RETPOLINE_CFLAGS)
 endif

 archscripts: scripts_basic
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@ -300,7 +300,7 @@ _start:
 	# Part 2 of the header, from the old setup.S

 		.ascii	"HdrS"		# header signature
-		.word	0x020e		# header version number (>= 0x0105)
+		.word	0x020d		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
@ -558,10 +558,6 @@ pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr
 init_size:		.long INIT_SIZE		# kernel initialization size
 handover_offset:	.long 0			# Filled in by build.c

-acpi_rsdp_addr:		.quad 0			# 64-bit physical pointer to the
-						# ACPI RSDP table, added with
-						# version 2.14
-
 # End of setup header #####################################################

 	.section ".entrytext", "ax"
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@ -438,26 +438,6 @@ int x86_setup_perfctr(struct perf_event *event)
 	if (config == -1LL)
 		return -EINVAL;

-	/*
-	 * Branch tracing:
-	 */
-	if (attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS &&
-	    !attr->freq && hwc->sample_period == 1) {
-		/* BTS is not supported by this architecture. */
-		if (!x86_pmu.bts_active)
-			return -EOPNOTSUPP;
-
-		/* BTS is currently only allowed for user-mode. */
-		if (!attr->exclude_kernel)
-			return -EOPNOTSUPP;
-
-		/* disallow bts if conflicting events are present */
-		if (x86_add_exclusive(x86_lbr_exclusive_lbr))
-			return -EBUSY;
-
-		event->destroy = hw_perf_lbr_event_destroy;
-	}
-
 	hwc->config |= config;

 	return 0;
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@ -2306,14 +2306,18 @@ static int handle_pmi_common(struct pt_regs *regs, u64 status)
 	return handled;
 }

-static bool disable_counter_freezing;
+static bool disable_counter_freezing = true;
 static int __init intel_perf_counter_freezing_setup(char *s)
 {
-	disable_counter_freezing = true;
-	pr_info("Intel PMU Counter freezing feature disabled\n");
+	bool res;
+
+	if (kstrtobool(s, &res))
+		return -EINVAL;
+
+	disable_counter_freezing = !res;
 	return 1;
 }
-__setup("disable_counter_freezing", intel_perf_counter_freezing_setup);
+__setup("perf_v4_pmi=", intel_perf_counter_freezing_setup);

 /*
 * Simplified handler for Arch Perfmon v4:
@ -2470,16 +2474,7 @@ done:
 static struct event_constraint *
 intel_bts_constraints(struct perf_event *event)
 {
-	struct hw_perf_event *hwc = &event->hw;
-	unsigned int hw_event, bts_event;
-
-	if (event->attr.freq)
-		return NULL;
-
-	hw_event = hwc->config & INTEL_ARCH_EVENT_MASK;
-	bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS);
-
-	if (unlikely(hw_event == bts_event && hwc->sample_period == 1))
+	if (unlikely(intel_pmu_has_bts(event)))
 		return &bts_constraint;

 	return NULL;
@ -3098,10 +3093,51 @@ static unsigned long intel_pmu_large_pebs_flags(struct perf_event *event)
 	return flags;
 }

+static int intel_pmu_bts_config(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+
+	if (unlikely(intel_pmu_has_bts(event))) {
+		/* BTS is not supported by this architecture. */
+		if (!x86_pmu.bts_active)
+			return -EOPNOTSUPP;
+
+		/* BTS is currently only allowed for user-mode. */
+		if (!attr->exclude_kernel)
+			return -EOPNOTSUPP;
+
+		/* BTS is not allowed for precise events. */
+		if (attr->precise_ip)
+			return -EOPNOTSUPP;
+
+		/* disallow bts if conflicting events are present */
+		if (x86_add_exclusive(x86_lbr_exclusive_lbr))
+			return -EBUSY;
+
+		event->destroy = hw_perf_lbr_event_destroy;
+	}
+
+	return 0;
+}
+
+static int core_pmu_hw_config(struct perf_event *event)
+{
+	int ret = x86_pmu_hw_config(event);
+
+	if (ret)
+		return ret;
+
+	return intel_pmu_bts_config(event);
+}
+
 static int intel_pmu_hw_config(struct perf_event *event)
 {
 	int ret = x86_pmu_hw_config(event);

+	if (ret)
+		return ret;
+
+	ret = intel_pmu_bts_config(event);
 	if (ret)
 		return ret;

@ -3127,7 +3163,7 @@ static int intel_pmu_hw_config(struct perf_event *event)
 		/*
 		 * BTS is set up earlier in this path, so don't account twice
 		 */
-		if (!intel_pmu_has_bts(event)) {
+		if (!unlikely(intel_pmu_has_bts(event))) {
 			/* disallow lbr if conflicting events are present */
 			if (x86_add_exclusive(x86_lbr_exclusive_lbr))
 				return -EBUSY;
@ -3596,7 +3632,7 @@ static __initconst const struct x86_pmu core_pmu = {
 	.enable_all		= core_pmu_enable_all,
 	.enable			= core_pmu_enable_event,
 	.disable		= x86_pmu_disable_event,
-	.hw_config		= x86_pmu_hw_config,
+	.hw_config		= core_pmu_hw_config,
 	.schedule_events	= x86_schedule_events,
 	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
 	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@ -859,11 +859,16 @@ static inline int amd_pmu_init(void)

 static inline bool intel_pmu_has_bts(struct perf_event *event)
 {
-	if (event->attr.config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS &&
-	    !event->attr.freq && event->hw.sample_period == 1)
-		return true;
+	struct hw_perf_event *hwc = &event->hw;
+	unsigned int hw_event, bts_event;

-	return false;
+	if (event->attr.freq)
+		return false;
+
+	hw_event = hwc->config & INTEL_ARCH_EVENT_MASK;
+	bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS);
+
+	return hw_event == bts_event && hwc->sample_period == 1;
 }

 int intel_pmu_save_and_restart(struct perf_event *event);
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@ -226,7 +226,7 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)
 		     "3: movl $-2,%[err]\n\t"				\
 		     "jmp 2b\n\t"					\
 		     ".popsection\n\t"					\
-		     _ASM_EXTABLE_UA(1b, 3b)				\
+		     _ASM_EXTABLE(1b, 3b)				\
 		     : [err] "=r" (err)					\
 		     : "D" (st), "m" (*st), "a" (lmask), "d" (hmask)	\
 		     : "memory")
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@ -1094,7 +1094,8 @@ struct kvm_x86_ops {
 	bool (*has_wbinvd_exit)(void);

 	u64 (*read_l1_tsc_offset)(struct kvm_vcpu *vcpu);
-	void (*write_tsc_offset)(struct kvm_vcpu *vcpu, u64 offset);
+	/* Returns actual tsc_offset set in active VMCS */
+	u64 (*write_l1_tsc_offset)(struct kvm_vcpu *vcpu, u64 offset);

 	void (*get_exit_info)(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2);

--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@ -41,9 +41,10 @@

 #define MSR_IA32_SPEC_CTRL		0x00000048 /* Speculation Control */
 #define SPEC_CTRL_IBRS			(1 << 0)   /* Indirect Branch Restricted Speculation */
-#define SPEC_CTRL_STIBP			(1 << 1)   /* Single Thread Indirect Branch Predictors */
+#define SPEC_CTRL_STIBP_SHIFT		1	   /* Single Thread Indirect Branch Predictor (STIBP) bit */
+#define SPEC_CTRL_STIBP			(1 << SPEC_CTRL_STIBP_SHIFT)	/* STIBP mask */
 #define SPEC_CTRL_SSBD_SHIFT		2	   /* Speculative Store Bypass Disable bit */
-#define SPEC_CTRL_SSBD			(1 << SPEC_CTRL_SSBD_SHIFT)   /* Speculative Store Bypass Disable */
+#define SPEC_CTRL_SSBD			(1 << SPEC_CTRL_SSBD_SHIFT)	/* Speculative Store Bypass Disable */

 #define MSR_IA32_PRED_CMD		0x00000049 /* Prediction Command */
 #define PRED_CMD_IBPB			(1 << 0)   /* Indirect Branch Prediction Barrier */
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@ -3,6 +3,8 @@
 #ifndef _ASM_X86_NOSPEC_BRANCH_H_
 #define _ASM_X86_NOSPEC_BRANCH_H_

+#include <linux/static_key.h>
+
 #include <asm/alternative.h>
 #include <asm/alternative-asm.h>
 #include <asm/cpufeatures.h>
@ -162,11 +164,12 @@
 	_ASM_PTR " 999b\n\t"					\
 	".popsection\n\t"

-#if defined(CONFIG_X86_64) && defined(RETPOLINE)
+#ifdef CONFIG_RETPOLINE
+#ifdef CONFIG_X86_64

 /*
- * Since the inline asm uses the %V modifier which is only in newer GCC,
- * the 64-bit one is dependent on RETPOLINE not CONFIG_RETPOLINE.
+ * Inline asm uses the %V modifier which is only in newer GCC
+ * which is ensured when CONFIG_RETPOLINE is defined.
 */
 # define CALL_NOSPEC						\
 	ANNOTATE_NOSPEC_ALTERNATIVE				\
@ -181,7 +184,7 @@
 	X86_FEATURE_RETPOLINE_AMD)
 # define THUNK_TARGET(addr) [thunk_target] "r" (addr)

-#elif defined(CONFIG_X86_32) && defined(CONFIG_RETPOLINE)
+#else /* CONFIG_X86_32 */
 /*
 * For i386 we use the original ret-equivalent retpoline, because
 * otherwise we'll run out of registers. We don't care about CET
@ -211,6 +214,7 @@
 	X86_FEATURE_RETPOLINE_AMD)

 # define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
+#endif
 #else /* No retpoline for C / inline asm */
 # define CALL_NOSPEC "call *%[thunk_target]\n"
 # define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
@ -219,13 +223,19 @@
 /* The Spectre V2 mitigation variants */
 enum spectre_v2_mitigation {
 	SPECTRE_V2_NONE,
-	SPECTRE_V2_RETPOLINE_MINIMAL,
-	SPECTRE_V2_RETPOLINE_MINIMAL_AMD,
 	SPECTRE_V2_RETPOLINE_GENERIC,
 	SPECTRE_V2_RETPOLINE_AMD,
 	SPECTRE_V2_IBRS_ENHANCED,
 };

+/* The indirect branch speculation control variants */
+enum spectre_v2_user_mitigation {
+	SPECTRE_V2_USER_NONE,
+	SPECTRE_V2_USER_STRICT,
+	SPECTRE_V2_USER_PRCTL,
+	SPECTRE_V2_USER_SECCOMP,
+};
+
 /* The Speculative Store Bypass disable variants */
 enum ssb_mitigation {
 	SPEC_STORE_BYPASS_NONE,
@ -303,6 +313,10 @@ do {									\
 	preempt_enable();						\
 } while (0)

+DECLARE_STATIC_KEY_FALSE(switch_to_cond_stibp);
+DECLARE_STATIC_KEY_FALSE(switch_mm_cond_ibpb);
+DECLARE_STATIC_KEY_FALSE(switch_mm_always_ibpb);
+
 #endif /* __ASSEMBLY__ */

 /*
--- a/arch/x86/include/asm/spec-ctrl.h
+++ b/arch/x86/include/asm/spec-ctrl.h
@ -53,12 +53,24 @@ static inline u64 ssbd_tif_to_spec_ctrl(u64 tifn)
 	return (tifn & _TIF_SSBD) >> (TIF_SSBD - SPEC_CTRL_SSBD_SHIFT);
 }

+static inline u64 stibp_tif_to_spec_ctrl(u64 tifn)
+{
+	BUILD_BUG_ON(TIF_SPEC_IB < SPEC_CTRL_STIBP_SHIFT);
+	return (tifn & _TIF_SPEC_IB) >> (TIF_SPEC_IB - SPEC_CTRL_STIBP_SHIFT);
+}
+
 static inline unsigned long ssbd_spec_ctrl_to_tif(u64 spec_ctrl)
 {
 	BUILD_BUG_ON(TIF_SSBD < SPEC_CTRL_SSBD_SHIFT);
 	return (spec_ctrl & SPEC_CTRL_SSBD) << (TIF_SSBD - SPEC_CTRL_SSBD_SHIFT);
 }

+static inline unsigned long stibp_spec_ctrl_to_tif(u64 spec_ctrl)
+{
+	BUILD_BUG_ON(TIF_SPEC_IB < SPEC_CTRL_STIBP_SHIFT);
+	return (spec_ctrl & SPEC_CTRL_STIBP) << (TIF_SPEC_IB - SPEC_CTRL_STIBP_SHIFT);
+}
+
 static inline u64 ssbd_tif_to_amd_ls_cfg(u64 tifn)
 {
 	return (tifn & _TIF_SSBD) ? x86_amd_ls_cfg_ssbd_mask : 0ULL;
@ -70,11 +82,7 @@ extern void speculative_store_bypass_ht_init(void);
 static inline void speculative_store_bypass_ht_init(void) { }
 #endif

-extern void speculative_store_bypass_update(unsigned long tif);
-
-static inline void speculative_store_bypass_update_current(void)
-{
-	speculative_store_bypass_update(current_thread_info()->flags);
-}
+extern void speculation_ctrl_update(unsigned long tif);
+extern void speculation_ctrl_update_current(void);

 #endif
--- a/arch/x86/include/asm/switch_to.h
+++ b/arch/x86/include/asm/switch_to.h
@ -11,9 +11,6 @@ struct task_struct *__switch_to_asm(struct task_struct *prev,

 __visible struct task_struct *__switch_to(struct task_struct *prev,
 					  struct task_struct *next);
-struct tss_struct;
-void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
-		      struct tss_struct *tss);

 /* This runs runs on the previous thread's stack. */
 static inline void prepare_switch_to(struct task_struct *next)
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@ -79,10 +79,12 @@ struct thread_info {
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_SINGLESTEP		4	/* reenable singlestep on user return*/
-#define TIF_SSBD			5	/* Reduced data speculation */
+#define TIF_SSBD		5	/* Speculative store bypass disable */
 #define TIF_SYSCALL_EMU		6	/* syscall emulation active */
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SECCOMP		8	/* secure computing */
+#define TIF_SPEC_IB		9	/* Indirect branch speculation mitigation */
+#define TIF_SPEC_FORCE_UPDATE	10	/* Force speculation MSR update in context switch */
 #define TIF_USER_RETURN_NOTIFY	11	/* notify kernel of userspace return */
 #define TIF_UPROBE		12	/* breakpointed or singlestepping */
 #define TIF_PATCH_PENDING	13	/* pending live patching update */
@ -110,6 +112,8 @@ struct thread_info {
 #define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_SPEC_IB		(1 << TIF_SPEC_IB)
+#define _TIF_SPEC_FORCE_UPDATE	(1 << TIF_SPEC_FORCE_UPDATE)
 #define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_PATCH_PENDING	(1 << TIF_PATCH_PENDING)
@ -145,8 +149,18 @@ struct thread_info {
 	 _TIF_FSCHECK)

 /* flags to check in __switch_to() */
-#define _TIF_WORK_CTXSW							\
-	(_TIF_IO_BITMAP|_TIF_NOCPUID|_TIF_NOTSC|_TIF_BLOCKSTEP|_TIF_SSBD)
+#define _TIF_WORK_CTXSW_BASE						\
+	(_TIF_IO_BITMAP|_TIF_NOCPUID|_TIF_NOTSC|_TIF_BLOCKSTEP|		\
+	 _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE)
+
+/*
+ * Avoid calls to __switch_to_xtra() on UP as STIBP is not evaluated.
+ */
+#ifdef CONFIG_SMP
+# define _TIF_WORK_CTXSW	(_TIF_WORK_CTXSW_BASE | _TIF_SPEC_IB)
+#else
+# define _TIF_WORK_CTXSW	(_TIF_WORK_CTXSW_BASE)
+#endif

 #define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
 #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW)
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@ -169,10 +169,14 @@ struct tlb_state {

 #define LOADED_MM_SWITCHING ((struct mm_struct *)1)

+	/* Last user mm for optimizing IBPB */
+	union {
+		struct mm_struct	*last_user_mm;
+		unsigned long		last_user_mm_ibpb;
+	};
+
 	u16 loaded_mm_asid;
 	u16 next_asid;
-	/* last user mm's ctx id */
-	u64 last_ctx_id;

 	/*
 	 * We can be in one of several states:
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@ -303,6 +303,4 @@ extern void x86_init_noop(void);
 extern void x86_init_uint_noop(unsigned int unused);
 extern bool x86_pnpbios_disabled(void);

-void x86_verify_bootdata_version(void);
-
 #endif
--- a/arch/x86/include/uapi/asm/bootparam.h
+++ b/arch/x86/include/uapi/asm/bootparam.h
@ -16,9 +16,6 @@
 #define RAMDISK_PROMPT_FLAG		0x8000
 #define RAMDISK_LOAD_FLAG		0x4000

-/* version flags */
-#define VERSION_WRITTEN	0x8000
-
 /* loadflags */
 #define LOADED_HIGH	(1<<0)
 #define KASLR_FLAG	(1<<1)
@ -89,7 +86,6 @@ struct setup_header {
 	__u64	pref_address;
 	__u32	init_size;
 	__u32	handover_offset;
-	__u64	acpi_rsdp_addr;
 } __attribute__((packed));

 struct sys_desc_table {
@ -159,7 +155,8 @@ struct boot_params {
 	__u8  _pad2[4];					/* 0x054 */
 	__u64  tboot_addr;				/* 0x058 */
 	struct ist_info ist_info;			/* 0x060 */
-	__u8  _pad3[16];				/* 0x070 */
+	__u64 acpi_rsdp_addr;				/* 0x070 */
+	__u8  _pad3[8];					/* 0x078 */
 	__u8  hd0_info[16];	/* obsolete! */		/* 0x080 */
 	__u8  hd1_info[16];	/* obsolete! */		/* 0x090 */
 	struct sys_desc_table sys_desc_table; /* obsolete! */	/* 0x0a0 */
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@ -1776,5 +1776,5 @@ void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)

 u64 x86_default_get_root_pointer(void)
 {
-	return boot_params.hdr.acpi_rsdp_addr;
+	return boot_params.acpi_rsdp_addr;
 }
--- a/Show More
+++ b/Show More