net: ll_temac: Extend support to non-device-tree platforms

Support initialization with platdata, so the driver can be used on
non-device-tree platforms.

For currently supported device-tree platforms, the driver should behave
as before.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Esben Haabendal 2019-04-30 09:17:49 +02:00 committed by David S. Miller
parent a63625d2a0
commit 8425c41d1e
4 changed files with 166 additions and 66 deletions

View File

@ -334,6 +334,9 @@ struct temac_local {
/* Connection to PHY device */
struct device_node *phy_node;
/* For non-device-tree devices */
char phy_name[MII_BUS_ID_SIZE + 3];
phy_interface_t phy_interface;
/* MDIO bus data */
struct mii_bus *mii_bus; /* MII bus reference */

View File

@ -33,6 +33,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/netdevice.h>
#include <linux/if_ether.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
@ -51,6 +52,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/xilinx-ll-temac.h>
#include "ll_temac.h"
@ -187,7 +189,7 @@ static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
/*
* temac_dcr_setup - This is a stub for when DCR is not supported,
* such as with MicroBlaze
* such as with MicroBlaze and x86
*/
static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
struct device_node *np)
@ -857,7 +859,14 @@ static int temac_open(struct net_device *ndev)
dev_err(lp->dev, "of_phy_connect() failed\n");
return -ENODEV;
}
phy_start(phydev);
} else if (strlen(lp->phy_name) > 0) {
phydev = phy_connect(lp->ndev, lp->phy_name, temac_adjust_link,
lp->phy_interface);
if (!phydev) {
dev_err(lp->dev, "phy_connect() failed\n");
return -ENODEV;
}
phy_start(phydev);
}
@ -977,11 +986,13 @@ static const struct ethtool_ops temac_ethtool_ops = {
.set_link_ksettings = phy_ethtool_set_link_ksettings,
};
static int temac_of_probe(struct platform_device *op)
static int temac_probe(struct platform_device *pdev)
{
struct device_node *np;
struct ll_temac_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *temac_np = dev_of_node(&pdev->dev), *dma_np;
struct temac_local *lp;
struct net_device *ndev;
struct resource *res;
const void *addr;
__be32 *p;
int rc = 0;
@ -991,8 +1002,8 @@ static int temac_of_probe(struct platform_device *op)
if (!ndev)
return -ENOMEM;
platform_set_drvdata(op, ndev);
SET_NETDEV_DEV(ndev, &op->dev);
platform_set_drvdata(pdev, ndev);
SET_NETDEV_DEV(ndev, &pdev->dev);
ndev->flags &= ~IFF_MULTICAST; /* clear multicast */
ndev->features = NETIF_F_SG;
ndev->netdev_ops = &temac_netdev_ops;
@ -1014,79 +1025,129 @@ static int temac_of_probe(struct platform_device *op)
/* setup temac private info structure */
lp = netdev_priv(ndev);
lp->ndev = ndev;
lp->dev = &op->dev;
lp->dev = &pdev->dev;
lp->options = XTE_OPTION_DEFAULTS;
spin_lock_init(&lp->rx_lock);
mutex_init(&lp->indirect_mutex);
/* map device registers */
lp->regs = devm_of_iomap(&op->dev, op->dev.of_node, 0, NULL);
if (!lp->regs) {
dev_err(&op->dev, "could not map temac regs.\n");
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
lp->regs = devm_ioremap_nocache(&pdev->dev, res->start,
resource_size(res));
if (IS_ERR(lp->regs)) {
dev_err(&pdev->dev, "could not map TEMAC registers\n");
return PTR_ERR(lp->regs);
}
/* Setup checksum offload, but default to off if not specified */
lp->temac_features = 0;
p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,txcsum", NULL);
if (p && be32_to_cpu(*p)) {
lp->temac_features |= TEMAC_FEATURE_TX_CSUM;
if (temac_np) {
p = (__be32 *)of_get_property(temac_np, "xlnx,txcsum", NULL);
if (p && be32_to_cpu(*p))
lp->temac_features |= TEMAC_FEATURE_TX_CSUM;
p = (__be32 *)of_get_property(temac_np, "xlnx,rxcsum", NULL);
if (p && be32_to_cpu(*p))
lp->temac_features |= TEMAC_FEATURE_RX_CSUM;
} else if (pdata) {
if (pdata->txcsum)
lp->temac_features |= TEMAC_FEATURE_TX_CSUM;
if (pdata->rxcsum)
lp->temac_features |= TEMAC_FEATURE_RX_CSUM;
}
if (lp->temac_features & TEMAC_FEATURE_TX_CSUM)
/* Can checksum TCP/UDP over IPv4. */
ndev->features |= NETIF_F_IP_CSUM;
}
p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL);
if (p && be32_to_cpu(*p))
lp->temac_features |= TEMAC_FEATURE_RX_CSUM;
/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
np = of_parse_phandle(op->dev.of_node, "llink-connected", 0);
if (!np) {
dev_err(&op->dev, "could not find DMA node\n");
return -ENODEV;
}
/* Setup LocalLink DMA */
if (temac_np) {
/* Find the DMA node, map the DMA registers, and
* decode the DMA IRQs.
*/
dma_np = of_parse_phandle(temac_np, "llink-connected", 0);
if (!dma_np) {
dev_err(&pdev->dev, "could not find DMA node\n");
return -ENODEV;
}
/* Setup the DMA register accesses, could be DCR or memory mapped */
if (temac_dcr_setup(lp, op, np)) {
/* no DCR in the device tree, try non-DCR */
lp->sdma_regs = devm_of_iomap(&op->dev, np, 0, NULL);
if (lp->sdma_regs) {
/* Setup the DMA register accesses, could be DCR or
* memory mapped.
*/
if (temac_dcr_setup(lp, pdev, dma_np)) {
/* no DCR in the device tree, try non-DCR */
lp->sdma_regs = devm_of_iomap(&pdev->dev, dma_np, 0,
NULL);
if (IS_ERR(lp->sdma_regs)) {
dev_err(&pdev->dev,
"unable to map DMA registers\n");
of_node_put(dma_np);
return PTR_ERR(lp->sdma_regs);
}
lp->dma_in = temac_dma_in32;
lp->dma_out = temac_dma_out32;
dev_dbg(&op->dev, "MEM base: %p\n", lp->sdma_regs);
} else {
dev_err(&op->dev, "unable to map DMA registers\n");
of_node_put(np);
return -ENOMEM;
dev_dbg(&pdev->dev, "MEM base: %p\n", lp->sdma_regs);
}
/* Get DMA RX and TX interrupts */
lp->rx_irq = irq_of_parse_and_map(dma_np, 0);
lp->tx_irq = irq_of_parse_and_map(dma_np, 1);
/* Finished with the DMA node; drop the reference */
of_node_put(dma_np);
} else if (pdata) {
/* 2nd memory resource specifies DMA registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
lp->sdma_regs = devm_ioremap_nocache(&pdev->dev, res->start,
resource_size(res));
if (IS_ERR(lp->sdma_regs)) {
dev_err(&pdev->dev,
"could not map DMA registers\n");
return PTR_ERR(lp->sdma_regs);
}
lp->dma_in = temac_dma_in32;
lp->dma_out = temac_dma_out32;
/* Get DMA RX and TX interrupts */
lp->rx_irq = platform_get_irq(pdev, 0);
lp->tx_irq = platform_get_irq(pdev, 1);
}
lp->rx_irq = irq_of_parse_and_map(np, 0);
lp->tx_irq = irq_of_parse_and_map(np, 1);
of_node_put(np); /* Finished with the DMA node; drop the reference */
if (!lp->rx_irq || !lp->tx_irq) {
dev_err(&op->dev, "could not determine irqs\n");
return -ENOMEM;
/* Error handle returned DMA RX and TX interrupts */
if (lp->rx_irq < 0) {
if (lp->rx_irq != -EPROBE_DEFER)
dev_err(&pdev->dev, "could not get DMA RX irq\n");
return lp->rx_irq;
}
if (lp->tx_irq < 0) {
if (lp->tx_irq != -EPROBE_DEFER)
dev_err(&pdev->dev, "could not get DMA TX irq\n");
return lp->tx_irq;
}
/* Retrieve the MAC address */
addr = of_get_mac_address(op->dev.of_node);
if (!addr) {
dev_err(&op->dev, "could not find MAC address\n");
return -ENODEV;
if (temac_np) {
/* Retrieve the MAC address */
addr = of_get_mac_address(temac_np);
if (!addr) {
dev_err(&pdev->dev, "could not find MAC address\n");
return -ENODEV;
}
temac_init_mac_address(ndev, addr);
} else if (pdata) {
temac_init_mac_address(ndev, pdata->mac_addr);
}
temac_init_mac_address(ndev, addr);
rc = temac_mdio_setup(lp, pdev);
if (rc)
dev_warn(&op->dev, "error registering MDIO bus\n");
dev_warn(&pdev->dev, "error registering MDIO bus\n");
lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
if (lp->phy_node)
dev_dbg(lp->dev, "using PHY node %pOF (%p)\n", np, np);
if (temac_np) {
lp->phy_node = of_parse_phandle(temac_np, "phy-handle", 0);
if (lp->phy_node)
dev_dbg(lp->dev, "using PHY node %pOF\n", temac_np);
} else if (pdata) {
snprintf(lp->phy_name, sizeof(lp->phy_name),
PHY_ID_FMT, lp->mii_bus->id, pdata->phy_addr);
lp->phy_interface = pdata->phy_interface;
}
/* Add the device attributes */
rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group);
@ -1106,19 +1167,21 @@ static int temac_of_probe(struct platform_device *op)
err_register_ndev:
sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
err_sysfs_create:
of_node_put(lp->phy_node);
if (lp->phy_node)
of_node_put(lp->phy_node);
temac_mdio_teardown(lp);
return rc;
}
static int temac_of_remove(struct platform_device *op)
static int temac_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(op);
struct net_device *ndev = platform_get_drvdata(pdev);
struct temac_local *lp = netdev_priv(ndev);
unregister_netdev(ndev);
sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
of_node_put(lp->phy_node);
if (lp->phy_node)
of_node_put(lp->phy_node);
temac_mdio_teardown(lp);
return 0;
}
@ -1132,16 +1195,16 @@ static const struct of_device_id temac_of_match[] = {
};
MODULE_DEVICE_TABLE(of, temac_of_match);
static struct platform_driver temac_of_driver = {
.probe = temac_of_probe,
.remove = temac_of_remove,
static struct platform_driver temac_driver = {
.probe = temac_probe,
.remove = temac_remove,
.driver = {
.name = "xilinx_temac",
.of_match_table = temac_of_match,
},
};
module_platform_driver(temac_of_driver);
module_platform_driver(temac_driver);
MODULE_DESCRIPTION("Xilinx LL_TEMAC Ethernet driver");
MODULE_AUTHOR("Yoshio Kashiwagi");

View File

@ -14,6 +14,7 @@
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/of_mdio.h>
#include <linux/platform_data/xilinx-ll-temac.h>
#include "ll_temac.h"
@ -59,6 +60,7 @@ static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev)
{
struct ll_temac_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *np = dev_of_node(&pdev->dev);
struct mii_bus *bus;
u32 bus_hz;
@ -66,9 +68,16 @@ int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev)
int rc;
struct resource res;
/* Get MDIO bus frequency (if specified) */
bus_hz = 0;
if (np)
of_property_read_u32(np, "clock-frequency", &bus_hz);
else if (pdata)
bus_hz = pdata->mdio_clk_freq;
/* Calculate a reasonable divisor for the clock rate */
clk_div = 0x3f; /* worst-case default setting */
if (of_property_read_u32(np, "clock-frequency", &bus_hz) == 0) {
if (bus_hz != 0) {
clk_div = bus_hz / (2500 * 1000 * 2) - 1;
if (clk_div < 1)
clk_div = 1;
@ -86,9 +95,15 @@ int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev)
if (!bus)
return -ENOMEM;
of_address_to_resource(np, 0, &res);
snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
(unsigned long long)res.start);
if (np) {
of_address_to_resource(np, 0, &res);
snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
(unsigned long long)res.start);
} else if (pdata && pdata->mdio_bus_id >= 0) {
snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
pdata->mdio_bus_id);
}
bus->priv = lp;
bus->name = "Xilinx TEMAC MDIO";
bus->read = temac_mdio_read;

View File

@ -0,0 +1,19 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_XILINX_LL_TEMAC_H
#define __LINUX_XILINX_LL_TEMAC_H
#include <linux/if_ether.h>
#include <linux/phy.h>
struct ll_temac_platform_data {
bool txcsum; /* Enable/disable TX checksum */
bool rxcsum; /* Enable/disable RX checksum */
u8 mac_addr[ETH_ALEN]; /* MAC address (6 bytes) */
/* Clock frequency for input to MDIO clock generator */
u32 mdio_clk_freq;
unsigned long long mdio_bus_id; /* Unique id for MDIO bus */
int phy_addr; /* Address of the PHY to connect to */
phy_interface_t phy_interface; /* PHY interface mode */
};
#endif /* __LINUX_XILINX_LL_TEMAC_H */