EDAC/i10nm: Use readl() to access MMIO registers

Instead of raw access, use readl() to access MMIO registers of
memory controller to avoid possible compiler re-ordering.

Fixes: d4dc89d069 ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Cc: <stable@vger.kernel.org>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This commit is contained in:
Qiuxu Zhuo 2020-11-17 20:49:51 +08:00 committed by Tony Luck
parent 41545aabff
commit 83ff51c4e3

View File

@ -6,6 +6,7 @@
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include <asm/mce.h>
@ -19,14 +20,16 @@
#define i10nm_printk(level, fmt, arg...) \
edac_printk(level, "i10nm", fmt, ##arg)
#define I10NM_GET_SCK_BAR(d, reg) \
#define I10NM_GET_SCK_BAR(d, reg) \
pci_read_config_dword((d)->uracu, 0xd0, &(reg))
#define I10NM_GET_IMC_BAR(d, i, reg) \
pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg))
#define I10NM_GET_DIMMMTR(m, i, j) \
(*(u32 *)((m)->mbase + 0x2080c + (i) * 0x4000 + (j) * 4))
readl((m)->mbase + 0x2080c + (i) * 0x4000 + (j) * 4)
#define I10NM_GET_MCDDRTCFG(m, i, j) \
(*(u32 *)((m)->mbase + 0x20970 + (i) * 0x4000 + (j) * 4))
readl((m)->mbase + 0x20970 + (i) * 0x4000 + (j) * 4)
#define I10NM_GET_MCMTR(m, i) \
readl((m)->mbase + 0x20ef8 + (i) * 0x4000)
#define I10NM_GET_SCK_MMIO_BASE(reg) (GET_BITFIELD(reg, 0, 28) << 23)
#define I10NM_GET_IMC_MMIO_OFFSET(reg) (GET_BITFIELD(reg, 0, 10) << 12)
@ -148,7 +151,7 @@ static bool i10nm_check_ecc(struct skx_imc *imc, int chan)
{
u32 mcmtr;
mcmtr = *(u32 *)(imc->mbase + 0x20ef8 + chan * 0x4000);
mcmtr = I10NM_GET_MCMTR(imc, chan);
edac_dbg(1, "ch%d mcmtr reg %x\n", chan, mcmtr);
return !!GET_BITFIELD(mcmtr, 2, 2);