mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR

This family of chips was long ago supported by the pre-cfi driver.
CFI code tested on several Zaurus SL-5500 (Collie) 2x16 on 32 bit bus.

Function is_LH28F640BF() mimics is_m29ew() from cmdset_0002.c

Buffer write fixes as seen in 2007 patch c/o
Anti Sullin <anti.sullin <at> artecdesign.ee>
http://comments.gmane.org/gmane.linux.ports.arm.kernel/36733

[Brian: this patch is semi-urgent, because the following patch switches
  to using CFI detection for a chip which (until now) is unsupported by
  the CFI driver

  9218310  ARM: 8084/1: sa1100: collie: revert back to cfi_probe
]

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This commit is contained in:
Andrea Adami 2014-06-02 23:38:35 +02:00 committed by Brian Norris
parent 54c39e9ba3
commit 812c5fa82b

View File

@ -52,6 +52,11 @@
/* Atmel chips */
#define AT49BV640D 0x02de
#define AT49BV640DT 0x02db
/* Sharp chips */
#define LH28F640BFHE_PTTL90 0x00b0
#define LH28F640BFHE_PBTL90 0x00b1
#define LH28F640BFHE_PTTL70A 0x00b2
#define LH28F640BFHE_PBTL70A 0x00b3
static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@ -258,6 +263,36 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd)
(cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e;
};
static int is_LH28F640BF(struct cfi_private *cfi)
{
/* Sharp LH28F640BF Family */
if (cfi->mfr == CFI_MFR_SHARP && (
cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 ||
cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A))
return 1;
return 0;
}
static void fixup_LH28F640BF(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
struct cfi_pri_intelext *extp = cfi->cmdset_priv;
/* Reset the Partition Configuration Register on LH28F640BF
* to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */
if (is_LH28F640BF(cfi)) {
printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n");
map_write(map, CMD(0x60), 0);
map_write(map, CMD(0x04), 0);
/* We have set one single partition thus
* Simultaneous Operations are not allowed */
printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n");
extp->FeatureSupport &= ~512;
}
}
static void fixup_use_point(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
@ -309,6 +344,8 @@ static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct },
{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb },
{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock },
{ CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock },
{ CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF },
{ 0, 0, NULL }
};
@ -1649,6 +1686,12 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
initial_adr = adr;
cmd_adr = adr & ~(wbufsize-1);
/* Sharp LH28F640BF chips need the first address for the
* Page Buffer Program command. See Table 5 of
* LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */
if (is_LH28F640BF(cfi))
cmd_adr = adr;
/* Let's determine this according to the interleave only once */
write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);