mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 22:51:42 +00:00
[POWERPC] mpc5200: Allow for fixed speed MII configurations
Various improvements for configuring the MPC5200 MII link from the device tree: * Look for 'current-speed' property for fixed speed MII links * Look for 'fsl,7-wire-mode' property for boards using the 7 wire mode * move definition of private data structure out of the header file Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
This commit is contained in:
Grant Likely
parent
eabd90944b
commit
80791be111
@ -237,6 +237,17 @@ Each GPIO controller node should have the empty property gpio-controller and
|
||||
according to the bit numbers in the GPIO control registers. The second cell
|
||||
is for flags which is currently unsused.
|
||||
|
||||
8) FEC nodes
|
||||
The FEC node can specify one of the following properties to configure
|
||||
the MII link:
|
||||
"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire
|
||||
mode instead of MII
|
||||
"current-speed" - Specifies that the MII should be configured for a fixed
|
||||
speed. This property should contain two cells. The
|
||||
first cell specifies the speed in Mbps and the second
|
||||
should be '0' for half duplex and '1' for full duplex
|
||||
"phy-handle" - Contains a phandle to an Ethernet PHY.
|
||||
|
||||
IV - Extra Notes
|
||||
================
|
||||
|
||||
|
||||
@ -43,6 +43,29 @@
|
||||
|
||||
#define DRIVER_NAME "mpc52xx-fec"
|
||||
|
||||
#define FEC5200_PHYADDR_NONE (-1)
|
||||
#define FEC5200_PHYADDR_7WIRE (-2)
|
||||
|
||||
/* Private driver data structure */
|
||||
struct mpc52xx_fec_priv {
|
||||
int duplex;
|
||||
int speed;
|
||||
int r_irq;
|
||||
int t_irq;
|
||||
struct mpc52xx_fec __iomem *fec;
|
||||
struct bcom_task *rx_dmatsk;
|
||||
struct bcom_task *tx_dmatsk;
|
||||
spinlock_t lock;
|
||||
int msg_enable;
|
||||
|
||||
/* MDIO link details */
|
||||
int phy_addr;
|
||||
unsigned int phy_speed;
|
||||
struct phy_device *phydev;
|
||||
enum phy_state link;
|
||||
};
|
||||
|
||||
|
||||
static irqreturn_t mpc52xx_fec_interrupt(int, void *);
|
||||
static irqreturn_t mpc52xx_fec_rx_interrupt(int, void *);
|
||||
static irqreturn_t mpc52xx_fec_tx_interrupt(int, void *);
|
||||
@ -223,7 +246,7 @@ static int mpc52xx_fec_phy_start(struct net_device *dev)
|
||||
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
|
||||
int err;
|
||||
|
||||
if (!priv->has_phy)
|
||||
if (priv->phy_addr < 0)
|
||||
return 0;
|
||||
|
||||
err = mpc52xx_fec_init_phy(dev);
|
||||
@ -243,7 +266,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev)
|
||||
{
|
||||
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
|
||||
|
||||
if (!priv->has_phy)
|
||||
if (!priv->phydev)
|
||||
return;
|
||||
|
||||
phy_disconnect(priv->phydev);
|
||||
@ -255,7 +278,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev)
|
||||
static int mpc52xx_fec_phy_mii_ioctl(struct mpc52xx_fec_priv *priv,
|
||||
struct mii_ioctl_data *mii_data, int cmd)
|
||||
{
|
||||
if (!priv->has_phy)
|
||||
if (!priv->phydev)
|
||||
return -ENOTSUPP;
|
||||
|
||||
return phy_mii_ioctl(priv->phydev, mii_data, cmd);
|
||||
@ -265,7 +288,7 @@ static void mpc52xx_fec_phy_hw_init(struct mpc52xx_fec_priv *priv)
|
||||
{
|
||||
struct mpc52xx_fec __iomem *fec = priv->fec;
|
||||
|
||||
if (!priv->has_phy)
|
||||
if (priv->phydev)
|
||||
return;
|
||||
|
||||
out_be32(&fec->mii_speed, priv->phy_speed);
|
||||
@ -704,7 +727,7 @@ static void mpc52xx_fec_start(struct net_device *dev)
|
||||
rcntrl = FEC_RX_BUFFER_SIZE << 16; /* max frame length */
|
||||
rcntrl |= FEC_RCNTRL_FCE;
|
||||
|
||||
if (priv->has_phy)
|
||||
if (priv->phy_addr != FEC5200_PHYADDR_7WIRE)
|
||||
rcntrl |= FEC_RCNTRL_MII_MODE;
|
||||
|
||||
if (priv->duplex == DUPLEX_FULL)
|
||||
@ -864,7 +887,10 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
|
||||
struct net_device *ndev;
|
||||
struct mpc52xx_fec_priv *priv = NULL;
|
||||
struct resource mem;
|
||||
const phandle *ph;
|
||||
struct device_node *phy_node;
|
||||
const phandle *phy_handle;
|
||||
const u32 *prop;
|
||||
int prop_size;
|
||||
|
||||
phys_addr_t rx_fifo;
|
||||
phys_addr_t tx_fifo;
|
||||
@ -948,26 +974,37 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
|
||||
mpc52xx_fec_get_paddr(ndev, ndev->dev_addr);
|
||||
|
||||
priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT);
|
||||
priv->duplex = DUPLEX_FULL;
|
||||
|
||||
/* is the phy present in device tree? */
|
||||
ph = of_get_property(op->node, "phy-handle", NULL);
|
||||
if (ph) {
|
||||
const unsigned int *prop;
|
||||
struct device_node *phy_dn;
|
||||
priv->has_phy = 1;
|
||||
/*
|
||||
* Link mode configuration
|
||||
*/
|
||||
|
||||
phy_dn = of_find_node_by_phandle(*ph);
|
||||
prop = of_get_property(phy_dn, "reg", NULL);
|
||||
priv->phy_addr = *prop;
|
||||
|
||||
of_node_put(phy_dn);
|
||||
|
||||
/* Phy speed */
|
||||
/* Start with safe defaults for link connection */
|
||||
priv->phy_addr = FEC5200_PHYADDR_NONE;
|
||||
priv->speed = 100;
|
||||
priv->duplex = DUPLEX_HALF;
|
||||
priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
|
||||
} else {
|
||||
dev_info(&ndev->dev, "can't find \"phy-handle\" in device"
|
||||
" tree, using 7-wire mode\n");
|
||||
|
||||
/* the 7-wire property means don't use MII mode */
|
||||
if (of_find_property(op->node, "fsl,7-wire-mode", NULL))
|
||||
priv->phy_addr = FEC5200_PHYADDR_7WIRE;
|
||||
|
||||
/* The current speed preconfigures the speed of the MII link */
|
||||
prop = of_get_property(op->node, "current-speed", &prop_size);
|
||||
if (prop && (prop_size >= sizeof(u32) * 2)) {
|
||||
priv->speed = prop[0];
|
||||
priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
|
||||
}
|
||||
|
||||
/* If there is a phy handle, setup link to that phy */
|
||||
phy_handle = of_get_property(op->node, "phy-handle", &prop_size);
|
||||
if (phy_handle && (prop_size >= sizeof(phandle))) {
|
||||
phy_node = of_find_node_by_phandle(*phy_handle);
|
||||
prop = of_get_property(phy_node, "reg", &prop_size);
|
||||
if (prop && (prop_size >= sizeof(u32)))
|
||||
if ((*prop >= 0) && (*prop < PHY_MAX_ADDR))
|
||||
priv->phy_addr = *prop;
|
||||
of_node_put(phy_node);
|
||||
}
|
||||
|
||||
/* Hardware init */
|
||||
@ -982,6 +1019,20 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
|
||||
if (rv < 0)
|
||||
goto probe_error;
|
||||
|
||||
/* Now report the link setup */
|
||||
switch (priv->phy_addr) {
|
||||
case FEC5200_PHYADDR_NONE:
|
||||
dev_info(&ndev->dev, "Fixed speed MII link: %i%cD\n",
|
||||
priv->speed, priv->duplex ? 'F' : 'H');
|
||||
break;
|
||||
case FEC5200_PHYADDR_7WIRE:
|
||||
dev_info(&ndev->dev, "using 7-wire PHY mode\n");
|
||||
break;
|
||||
default:
|
||||
dev_info(&ndev->dev, "Using PHY at MDIO address %i\n",
|
||||
priv->phy_addr);
|
||||
}
|
||||
|
||||
/* We're done ! */
|
||||
dev_set_drvdata(&op->dev, ndev);
|
||||
|
||||
|
||||
@ -26,25 +26,6 @@
|
||||
|
||||
#define FEC_WATCHDOG_TIMEOUT ((400*HZ)/1000)
|
||||
|
||||
struct mpc52xx_fec_priv {
|
||||
int duplex;
|
||||
int r_irq;
|
||||
int t_irq;
|
||||
struct mpc52xx_fec __iomem *fec;
|
||||
struct bcom_task *rx_dmatsk;
|
||||
struct bcom_task *tx_dmatsk;
|
||||
spinlock_t lock;
|
||||
int msg_enable;
|
||||
|
||||
int has_phy;
|
||||
unsigned int phy_speed;
|
||||
unsigned int phy_addr;
|
||||
struct phy_device *phydev;
|
||||
enum phy_state link;
|
||||
int speed;
|
||||
};
|
||||
|
||||
|
||||
/* ======================================================================== */
|
||||
/* Hardware register sets & bits */
|
||||
/* ======================================================================== */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user