From 806c35f5057a64d3061ee4e2b1023bf6f6d328e2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 18 Jan 2006 17:44:08 -0800 Subject: [PATCH] [PATCH] EDAC: drivers for AMD 76x and Intel E750x, E752x Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/amd76x_edac.c | 356 ++++++++++++ drivers/edac/e752x_edac.c | 1069 ++++++++++++++++++++++++++++++++++++ drivers/edac/e7xxx_edac.c | 558 +++++++++++++++++++ 3 files changed, 1983 insertions(+) create mode 100644 drivers/edac/amd76x_edac.c create mode 100644 drivers/edac/e752x_edac.c create mode 100644 drivers/edac/e7xxx_edac.c diff --git a/drivers/edac/amd76x_edac.c b/drivers/edac/amd76x_edac.c new file mode 100644 index 000000000000..8e2b1295e70c --- /dev/null +++ b/drivers/edac/amd76x_edac.c @@ -0,0 +1,356 @@ +/* + * AMD 76x Memory Controller kernel module + * (C) 2003 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Thayne Harbaugh + * Based on work by Dan Hollis and others. + * http://www.anime.net/~goemon/linux-ecc/ + * + * $Id: edac_amd76x.c,v 1.4.2.5 2005/10/05 00:43:44 dsp_llnl Exp $ + * + */ + + +#include +#include +#include + +#include +#include + +#include + +#include "edac_mc.h" + + +#define AMD76X_NR_CSROWS 8 +#define AMD76X_NR_CHANS 1 +#define AMD76X_NR_DIMMS 4 + + +/* AMD 76x register addresses - device 0 function 0 - PCI bridge */ +#define AMD76X_ECC_MODE_STATUS 0x48 /* Mode and status of ECC (32b) + * + * 31:16 reserved + * 15:14 SERR enabled: x1=ue 1x=ce + * 13 reserved + * 12 diag: disabled, enabled + * 11:10 mode: dis, EC, ECC, ECC+scrub + * 9:8 status: x1=ue 1x=ce + * 7:4 UE cs row + * 3:0 CE cs row + */ +#define AMD76X_DRAM_MODE_STATUS 0x58 /* DRAM Mode and status (32b) + * + * 31:26 clock disable 5 - 0 + * 25 SDRAM init + * 24 reserved + * 23 mode register service + * 22:21 suspend to RAM + * 20 burst refresh enable + * 19 refresh disable + * 18 reserved + * 17:16 cycles-per-refresh + * 15:8 reserved + * 7:0 x4 mode enable 7 - 0 + */ +#define AMD76X_MEM_BASE_ADDR 0xC0 /* Memory base address (8 x 32b) + * + * 31:23 chip-select base + * 22:16 reserved + * 15:7 chip-select mask + * 6:3 reserved + * 2:1 address mode + * 0 chip-select enable + */ + + +struct amd76x_error_info { + u32 ecc_mode_status; +}; + + +enum amd76x_chips { + AMD761 = 0, + AMD762 +}; + + +struct amd76x_dev_info { + const char *ctl_name; +}; + + +static const struct amd76x_dev_info amd76x_devs[] = { + [AMD761] = {.ctl_name = "AMD761"}, + [AMD762] = {.ctl_name = "AMD762"}, +}; + + +/** + * amd76x_get_error_info - fetch error information + * @mci: Memory controller + * @info: Info to fill in + * + * Fetch and store the AMD76x ECC status. Clear pending status + * on the chip so that further errors will be reported + */ + +static void amd76x_get_error_info (struct mem_ctl_info *mci, + struct amd76x_error_info *info) +{ + pci_read_config_dword(mci->pdev, AMD76X_ECC_MODE_STATUS, + &info->ecc_mode_status); + + if (info->ecc_mode_status & BIT(8)) + pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, + (u32) BIT(8), (u32) BIT(8)); + + if (info->ecc_mode_status & BIT(9)) + pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, + (u32) BIT(9), (u32) BIT(9)); +} + + +/** + * amd76x_process_error_info - Error check + * @mci: Memory controller + * @info: Previously fetched information from chip + * @handle_errors: 1 if we should do recovery + * + * Process the chip state and decide if an error has occurred. + * A return of 1 indicates an error. Also if handle_errors is true + * then attempt to handle and clean up after the error + */ + +static int amd76x_process_error_info (struct mem_ctl_info *mci, + struct amd76x_error_info *info, int handle_errors) +{ + int error_found; + u32 row; + + error_found = 0; + + /* + * Check for an uncorrectable error + */ + if (info->ecc_mode_status & BIT(8)) { + error_found = 1; + + if (handle_errors) { + row = (info->ecc_mode_status >> 4) & 0xf; + edac_mc_handle_ue(mci, + mci->csrows[row].first_page, 0, row, + mci->ctl_name); + } + } + + /* + * Check for a correctable error + */ + if (info->ecc_mode_status & BIT(9)) { + error_found = 1; + + if (handle_errors) { + row = info->ecc_mode_status & 0xf; + edac_mc_handle_ce(mci, + mci->csrows[row].first_page, 0, 0, row, 0, + mci->ctl_name); + } + } + return error_found; +} + +/** + * amd76x_check - Poll the controller + * @mci: Memory controller + * + * Called by the poll handlers this function reads the status + * from the controller and checks for errors. + */ + +static void amd76x_check(struct mem_ctl_info *mci) +{ + struct amd76x_error_info info; + debugf3("MC: " __FILE__ ": %s()\n", __func__); + amd76x_get_error_info(mci, &info); + amd76x_process_error_info(mci, &info, 1); +} + + +/** + * amd76x_probe1 - Perform set up for detected device + * @pdev; PCI device detected + * @dev_idx: Device type index + * + * We have found an AMD76x and now need to set up the memory + * controller status reporting. We configure and set up the + * memory controller reporting and claim the device. + */ + +static int amd76x_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc = -ENODEV; + int index; + struct mem_ctl_info *mci = NULL; + enum edac_type ems_modes[] = { + EDAC_NONE, + EDAC_EC, + EDAC_SECDED, + EDAC_SECDED + }; + u32 ems; + u32 ems_mode; + + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS, &ems); + ems_mode = (ems >> 10) & 0x3; + + mci = edac_mc_alloc(0, AMD76X_NR_CSROWS, AMD76X_NR_CHANS); + + if (mci == NULL) { + rc = -ENOMEM; + goto fail; + } + + debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); + + mci->pdev = pci_dev_get(pdev); + mci->mtype_cap = MEM_FLAG_RDDR; + + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + mci->edac_cap = ems_mode ? + (EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE; + + mci->mod_name = BS_MOD_STR; + mci->mod_ver = "$Revision: 1.4.2.5 $"; + mci->ctl_name = amd76x_devs[dev_idx].ctl_name; + mci->edac_check = amd76x_check; + mci->ctl_page_to_phys = NULL; + + for (index = 0; index < mci->nr_csrows; index++) { + struct csrow_info *csrow = &mci->csrows[index]; + u32 mba; + u32 mba_base; + u32 mba_mask; + u32 dms; + + /* find the DRAM Chip Select Base address and mask */ + pci_read_config_dword(mci->pdev, + AMD76X_MEM_BASE_ADDR + (index * 4), + &mba); + + if (!(mba & BIT(0))) + continue; + + mba_base = mba & 0xff800000UL; + mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL; + + pci_read_config_dword(mci->pdev, AMD76X_DRAM_MODE_STATUS, + &dms); + + csrow->first_page = mba_base >> PAGE_SHIFT; + csrow->nr_pages = (mba_mask + 1) >> PAGE_SHIFT; + csrow->last_page = csrow->first_page + csrow->nr_pages - 1; + csrow->page_mask = mba_mask >> PAGE_SHIFT; + csrow->grain = csrow->nr_pages << PAGE_SHIFT; + csrow->mtype = MEM_RDDR; + csrow->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN; + csrow->edac_mode = ems_modes[ems_mode]; + } + + /* clear counters */ + pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, (u32) (0x3 << 8), + (u32) (0x3 << 8)); + + if (edac_mc_add_mc(mci)) { + debugf3("MC: " __FILE__ + ": %s(): failed edac_mc_add_mc()\n", __func__); + goto fail; + } + + /* get this far and it's successful */ + debugf3("MC: " __FILE__ ": %s(): success\n", __func__); + return 0; + +fail: + if (mci) { + if(mci->pdev) + pci_dev_put(mci->pdev); + edac_mc_free(mci); + } + return rc; +} + +/* returns count (>= 0), or negative on error */ +static int __devinit amd76x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + /* don't need to call pci_device_enable() */ + return amd76x_probe1(pdev, ent->driver_data); +} + + +/** + * amd76x_remove_one - driver shutdown + * @pdev: PCI device being handed back + * + * Called when the driver is unloaded. Find the matching mci + * structure for the device then delete the mci and free the + * resources. + */ + +static void __devexit amd76x_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + debugf0(__FILE__ ": %s()\n", __func__); + + if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL) + return; + if (edac_mc_del_mc(mci)) + return; + pci_dev_put(mci->pdev); + edac_mc_free(mci); +} + + +static const struct pci_device_id amd76x_pci_tbl[] __devinitdata = { + {PCI_VEND_DEV(AMD, FE_GATE_700C), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + AMD762}, + {PCI_VEND_DEV(AMD, FE_GATE_700E), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + AMD761}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, amd76x_pci_tbl); + + +static struct pci_driver amd76x_driver = { + .name = BS_MOD_STR, + .probe = amd76x_init_one, + .remove = __devexit_p(amd76x_remove_one), + .id_table = amd76x_pci_tbl, +}; + +int __init amd76x_init(void) +{ + return pci_register_driver(&amd76x_driver); +} + +static void __exit amd76x_exit(void) +{ + pci_unregister_driver(&amd76x_driver); +} + +module_init(amd76x_init); +module_exit(amd76x_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); +MODULE_DESCRIPTION("MC support for AMD 76x memory controllers"); diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c new file mode 100644 index 000000000000..959f584f5687 --- /dev/null +++ b/drivers/edac/e752x_edac.c @@ -0,0 +1,1069 @@ +/* + * Intel e752x Memory Controller kernel module + * (C) 2004 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * See "enum e752x_chips" below for supported chipsets + * + * Written by Tom Zimmerman + * + * Contributors: + * Thayne Harbaugh at realmsys.com (?) + * Wang Zhenyu at intel.com + * Dave Jiang at mvista.com + * + * $Id: bluesmoke_e752x.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $ + * + */ + + +#include +#include +#include + +#include +#include + +#include + +#include "edac_mc.h" + + +#ifndef PCI_DEVICE_ID_INTEL_7520_0 +#define PCI_DEVICE_ID_INTEL_7520_0 0x3590 +#endif /* PCI_DEVICE_ID_INTEL_7520_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7520_1_ERR +#define PCI_DEVICE_ID_INTEL_7520_1_ERR 0x3591 +#endif /* PCI_DEVICE_ID_INTEL_7520_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7525_0 +#define PCI_DEVICE_ID_INTEL_7525_0 0x359E +#endif /* PCI_DEVICE_ID_INTEL_7525_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7525_1_ERR +#define PCI_DEVICE_ID_INTEL_7525_1_ERR 0x3593 +#endif /* PCI_DEVICE_ID_INTEL_7525_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7320_0 +#define PCI_DEVICE_ID_INTEL_7320_0 0x3592 +#endif /* PCI_DEVICE_ID_INTEL_7320_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7320_1_ERR +#define PCI_DEVICE_ID_INTEL_7320_1_ERR 0x3593 +#endif /* PCI_DEVICE_ID_INTEL_7320_1_ERR */ + +#define E752X_NR_CSROWS 8 /* number of csrows */ + + +/* E752X register addresses - device 0 function 0 */ +#define E752X_DRB 0x60 /* DRAM row boundary register (8b) */ +#define E752X_DRA 0x70 /* DRAM row attribute register (8b) */ + /* + * 31:30 Device width row 7 + * 01=x8 10=x4 11=x8 DDR2 + * 27:26 Device width row 6 + * 23:22 Device width row 5 + * 19:20 Device width row 4 + * 15:14 Device width row 3 + * 11:10 Device width row 2 + * 7:6 Device width row 1 + * 3:2 Device width row 0 + */ +#define E752X_DRC 0x7C /* DRAM controller mode reg (32b) */ + /* FIXME:IS THIS RIGHT? */ + /* + * 22 Number channels 0=1,1=2 + * 19:18 DRB Granularity 32/64MB + */ +#define E752X_DRM 0x80 /* Dimm mapping register */ +#define E752X_DDRCSR 0x9A /* DDR control and status reg (16b) */ + /* + * 14:12 1 single A, 2 single B, 3 dual + */ +#define E752X_TOLM 0xC4 /* DRAM top of low memory reg (16b) */ +#define E752X_REMAPBASE 0xC6 /* DRAM remap base address reg (16b) */ +#define E752X_REMAPLIMIT 0xC8 /* DRAM remap limit address reg (16b) */ +#define E752X_REMAPOFFSET 0xCA /* DRAM remap limit offset reg (16b) */ + +/* E752X register addresses - device 0 function 1 */ +#define E752X_FERR_GLOBAL 0x40 /* Global first error register (32b) */ +#define E752X_NERR_GLOBAL 0x44 /* Global next error register (32b) */ +#define E752X_HI_FERR 0x50 /* Hub interface first error reg (8b) */ +#define E752X_HI_NERR 0x52 /* Hub interface next error reg (8b) */ +#define E752X_HI_ERRMASK 0x54 /* Hub interface error mask reg (8b) */ +#define E752X_HI_SMICMD 0x5A /* Hub interface SMI command reg (8b) */ +#define E752X_SYSBUS_FERR 0x60 /* System buss first error reg (16b) */ +#define E752X_SYSBUS_NERR 0x62 /* System buss next error reg (16b) */ +#define E752X_SYSBUS_ERRMASK 0x64 /* System buss error mask reg (16b) */ +#define E752X_SYSBUS_SMICMD 0x6A /* System buss SMI command reg (16b) */ +#define E752X_BUF_FERR 0x70 /* Memory buffer first error reg (8b) */ +#define E752X_BUF_NERR 0x72 /* Memory buffer next error reg (8b) */ +#define E752X_BUF_ERRMASK 0x74 /* Memory buffer error mask reg (8b) */ +#define E752X_BUF_SMICMD 0x7A /* Memory buffer SMI command reg (8b) */ +#define E752X_DRAM_FERR 0x80 /* DRAM first error register (16b) */ +#define E752X_DRAM_NERR 0x82 /* DRAM next error register (16b) */ +#define E752X_DRAM_ERRMASK 0x84 /* DRAM error mask register (8b) */ +#define E752X_DRAM_SMICMD 0x8A /* DRAM SMI command register (8b) */ +#define E752X_DRAM_RETR_ADD 0xAC /* DRAM Retry address register (32b) */ +#define E752X_DRAM_SEC1_ADD 0xA0 /* DRAM first correctable memory */ + /* error address register (32b) */ + /* + * 31 Reserved + * 30:2 CE address (64 byte block 34:6) + * 1 Reserved + * 0 HiLoCS + */ +#define E752X_DRAM_SEC2_ADD 0xC8 /* DRAM first correctable memory */ + /* error address register (32b) */ + /* + * 31 Reserved + * 30:2 CE address (64 byte block 34:6) + * 1 Reserved + * 0 HiLoCS + */ +#define E752X_DRAM_DED_ADD 0xA4 /* DRAM first uncorrectable memory */ + /* error address register (32b) */ + /* + * 31 Reserved + * 30:2 CE address (64 byte block 34:6) + * 1 Reserved + * 0 HiLoCS + */ +#define E752X_DRAM_SCRB_ADD 0xA8 /* DRAM first uncorrectable scrub memory */ + /* error address register (32b) */ + /* + * 31 Reserved + * 30:2 CE address (64 byte block 34:6) + * 1 Reserved + * 0 HiLoCS + */ +#define E752X_DRAM_SEC1_SYNDROME 0xC4 /* DRAM first correctable memory */ + /* error syndrome register (16b) */ +#define E752X_DRAM_SEC2_SYNDROME 0xC6 /* DRAM second correctable memory */ + /* error syndrome register (16b) */ +#define E752X_DEVPRES1 0xF4 /* Device Present 1 register (8b) */ + +/* ICH5R register addresses - device 30 function 0 */ +#define ICH5R_PCI_STAT 0x06 /* PCI status register (16b) */ +#define ICH5R_PCI_2ND_STAT 0x1E /* PCI status secondary reg (16b) */ +#define ICH5R_PCI_BRIDGE_CTL 0x3E /* PCI bridge control register (16b) */ + +enum e752x_chips { + E7520 = 0, + E7525 = 1, + E7320 = 2 +}; + + +struct e752x_pvt { + struct pci_dev *bridge_ck; + struct pci_dev *dev_d0f0; + struct pci_dev *dev_d0f1; + u32 tolm; + u32 remapbase; + u32 remaplimit; + int mc_symmetric; + u8 map[8]; + int map_type; + const struct e752x_dev_info *dev_info; +}; + + +struct e752x_dev_info { + u16 err_dev; + const char *ctl_name; +}; + +struct e752x_error_info { + u32 ferr_global; + u32 nerr_global; + u8 hi_ferr; + u8 hi_nerr; + u16 sysbus_ferr; + u16 sysbus_nerr; + u8 buf_ferr; + u8 buf_nerr; + u16 dram_ferr; + u16 dram_nerr; + u32 dram_sec1_add; + u32 dram_sec2_add; + u16 dram_sec1_syndrome; + u16 dram_sec2_syndrome; + u32 dram_ded_add; + u32 dram_scrb_add; + u32 dram_retr_add; +}; + +static const struct e752x_dev_info e752x_devs[] = { + [E7520] = { + .err_dev = PCI_DEVICE_ID_INTEL_7520_1_ERR, + .ctl_name = "E7520"}, + [E7525] = { + .err_dev = PCI_DEVICE_ID_INTEL_7525_1_ERR, + .ctl_name = "E7525"}, + [E7320] = { + .err_dev = PCI_DEVICE_ID_INTEL_7320_1_ERR, + .ctl_name = "E7320"}, +}; + + +static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci, + unsigned long page) +{ + u32 remap; + struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + + if (page < pvt->tolm) + return page; + if ((page >= 0x100000) && (page < pvt->remapbase)) + return page; + remap = (page - pvt->tolm) + pvt->remapbase; + if (remap < pvt->remaplimit) + return remap; + printk(KERN_ERR "Invalid page %lx - out of range\n", page); + return pvt->tolm - 1; +} + +static void do_process_ce(struct mem_ctl_info *mci, u16 error_one, + u32 sec1_add, u16 sec1_syndrome) +{ + u32 page; + int row; + int channel; + int i; + struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + + /* convert the addr to 4k page */ + page = sec1_add >> (PAGE_SHIFT - 4); + + /* FIXME - check for -1 */ + if (pvt->mc_symmetric) { + /* chip select are bits 14 & 13 */ + row = ((page >> 1) & 3); + printk(KERN_WARNING + "Test row %d Table %d %d %d %d %d %d %d %d\n", + row, pvt->map[0], pvt->map[1], pvt->map[2], + pvt->map[3], pvt->map[4], pvt->map[5], + pvt->map[6], pvt->map[7]); + + /* test for channel remapping */ + for (i = 0; i < 8; i++) { + if (pvt->map[i] == row) + break; + } + printk(KERN_WARNING "Test computed row %d\n", i); + if (i < 8) + row = i; + else + printk(KERN_WARNING + "MC%d: row %d not found in remap table\n", + mci->mc_idx, row); + } else + row = edac_mc_find_csrow_by_page(mci, page); + /* 0 = channel A, 1 = channel B */ + channel = !(error_one & 1); + + if (!pvt->map_type) + row = 7 - row; + edac_mc_handle_ce(mci, page, 0, sec1_syndrome, row, channel, + "e752x CE"); +} + + +static inline void process_ce(struct mem_ctl_info *mci, u16 error_one, + u32 sec1_add, u16 sec1_syndrome, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_process_ce(mci, error_one, sec1_add, sec1_syndrome); +} + +static void do_process_ue(struct mem_ctl_info *mci, u16 error_one, u32 ded_add, + u32 scrb_add) +{ + u32 error_2b, block_page; + int row; + struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + + if (error_one & 0x0202) { + error_2b = ded_add; + /* convert to 4k address */ + block_page = error_2b >> (PAGE_SHIFT - 4); + row = pvt->mc_symmetric ? + /* chip select are bits 14 & 13 */ + ((block_page >> 1) & 3) : + edac_mc_find_csrow_by_page(mci, block_page); + edac_mc_handle_ue(mci, block_page, 0, row, + "e752x UE from Read"); + } + if (error_one & 0x0404) { + error_2b = scrb_add; + /* convert to 4k address */ + block_page = error_2b >> (PAGE_SHIFT - 4); + row = pvt->mc_symmetric ? + /* chip select are bits 14 & 13 */ + ((block_page >> 1) & 3) : + edac_mc_find_csrow_by_page(mci, block_page); + edac_mc_handle_ue(mci, block_page, 0, row, + "e752x UE from Scruber"); + } +} + +static inline void process_ue(struct mem_ctl_info *mci, u16 error_one, + u32 ded_add, u32 scrb_add, int *error_found, int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_process_ue(mci, error_one, ded_add, scrb_add); +} + +static inline void process_ue_no_info_wr(struct mem_ctl_info *mci, + int *error_found, int handle_error) +{ + *error_found = 1; + + if (!handle_error) + return; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + edac_mc_handle_ue_no_info(mci, "e752x UE log memory write"); +} + +static void do_process_ded_retry(struct mem_ctl_info *mci, u16 error, + u32 retry_add) +{ + u32 error_1b, page; + int row; + struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; + + error_1b = retry_add; + page = error_1b >> (PAGE_SHIFT - 4); /* convert the addr to 4k page */ + row = pvt->mc_symmetric ? + ((page >> 1) & 3) : /* chip select are bits 14 & 13 */ + edac_mc_find_csrow_by_page(mci, page); + printk(KERN_WARNING + "MC%d: CE page 0x%lx, row %d : Memory read retry\n", + mci->mc_idx, (long unsigned int) page, row); +} + +static inline void process_ded_retry(struct mem_ctl_info *mci, u16 error, + u32 retry_add, int *error_found, int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_process_ded_retry(mci, error, retry_add); +} + +static inline void process_threshold_ce(struct mem_ctl_info *mci, u16 error, + int *error_found, int handle_error) +{ + *error_found = 1; + + if (handle_error) + printk(KERN_WARNING "MC%d: Memory threshold CE\n", + mci->mc_idx); +} + +char *global_message[11] = { + "PCI Express C1", "PCI Express C", "PCI Express B1", + "PCI Express B", "PCI Express A1", "PCI Express A", + "DMA Controler", "HUB Interface", "System Bus", + "DRAM Controler", "Internal Buffer" +}; + +char *fatal_message[2] = { "Non-Fatal ", "Fatal " }; + +static void do_global_error(int fatal, u32 errors) +{ + int i; + + for (i = 0; i < 11; i++) { + if (errors & (1 << i)) + printk(KERN_WARNING "%sError %s\n", + fatal_message[fatal], global_message[i]); + } +} + +static inline void global_error(int fatal, u32 errors, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_global_error(fatal, errors); +} + +char *hub_message[7] = { + "HI Address or Command Parity", "HI Illegal Access", + "HI Internal Parity", "Out of Range Access", + "HI Data Parity", "Enhanced Config Access", + "Hub Interface Target Abort" +}; + +static void do_hub_error(int fatal, u8 errors) +{ + int i; + + for (i = 0; i < 7; i++) { + if (errors & (1 << i)) + printk(KERN_WARNING "%sError %s\n", + fatal_message[fatal], hub_message[i]); + } +} + +static inline void hub_error(int fatal, u8 errors, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_hub_error(fatal, errors); +} + +char *membuf_message[4] = { + "Internal PMWB to DRAM parity", + "Internal PMWB to System Bus Parity", + "Internal System Bus or IO to PMWB Parity", + "Internal DRAM to PMWB Parity" +}; + +static void do_membuf_error(u8 errors) +{ + int i; + + for (i = 0; i < 4; i++) { + if (errors & (1 << i)) + printk(KERN_WARNING "Non-Fatal Error %s\n", + membuf_message[i]); + } +} + +static inline void membuf_error(u8 errors, int *error_found, int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_membuf_error(errors); +} + +char *sysbus_message[10] = { + "Addr or Request Parity", + "Data Strobe Glitch", + "Addr Strobe Glitch", + "Data Parity", + "Addr Above TOM", + "Non DRAM Lock Error", + "MCERR", "BINIT", + "Memory Parity", + "IO Subsystem Parity" +}; + +static void do_sysbus_error(int fatal, u32 errors) +{ + int i; + + for (i = 0; i < 10; i++) { + if (errors & (1 << i)) + printk(KERN_WARNING "%sError System Bus %s\n", + fatal_message[fatal], global_message[i]); + } +} + +static inline void sysbus_error(int fatal, u32 errors, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_sysbus_error(fatal, errors); +} + +static void e752x_check_hub_interface (struct e752x_error_info *info, + int *error_found, int handle_error) +{ + u8 stat8; + + //pci_read_config_byte(dev,E752X_HI_FERR,&stat8); + stat8 = info->hi_ferr; + if(stat8 & 0x7f) { /* Error, so process */ + stat8 &= 0x7f; + if(stat8 & 0x2b) + hub_error(1, stat8 & 0x2b, error_found, handle_error); + if(stat8 & 0x54) + hub_error(0, stat8 & 0x54, error_found, handle_error); + } + //pci_read_config_byte(dev,E752X_HI_NERR,&stat8); + stat8 = info->hi_nerr; + if(stat8 & 0x7f) { /* Error, so process */ + stat8 &= 0x7f; + if (stat8 & 0x2b) + hub_error(1, stat8 & 0x2b, error_found, handle_error); + if(stat8 & 0x54) + hub_error(0, stat8 & 0x54, error_found, handle_error); + } +} + +static void e752x_check_sysbus (struct e752x_error_info *info, int *error_found, + int handle_error) +{ + u32 stat32, error32; + + //pci_read_config_dword(dev,E752X_SYSBUS_FERR,&stat32); + stat32 = info->sysbus_ferr + (info->sysbus_nerr << 16); + + if (stat32 == 0) + return; /* no errors */ + + error32 = (stat32 >> 16) & 0x3ff; + stat32 = stat32 & 0x3ff; + if(stat32 & 0x083) + sysbus_error(1, stat32 & 0x083, error_found, handle_error); + if(stat32 & 0x37c) + sysbus_error(0, stat32 & 0x37c, error_found, handle_error); + if(error32 & 0x083) + sysbus_error(1, error32 & 0x083, error_found, handle_error); + if(error32 & 0x37c) + sysbus_error(0, error32 & 0x37c, error_found, handle_error); +} + +static void e752x_check_membuf (struct e752x_error_info *info, int *error_found, + int handle_error) +{ + u8 stat8; + + stat8 = info->buf_ferr; + if (stat8 & 0x0f) { /* Error, so process */ + stat8 &= 0x0f; + membuf_error(stat8, error_found, handle_error); + } + stat8 = info->buf_nerr; + if (stat8 & 0x0f) { /* Error, so process */ + stat8 &= 0x0f; + membuf_error(stat8, error_found, handle_error); + } +} + +static void e752x_check_dram (struct mem_ctl_info *mci, + struct e752x_error_info *info, int *error_found, int handle_error) +{ + u16 error_one, error_next; + + error_one = info->dram_ferr; + error_next = info->dram_nerr; + + /* decode and report errors */ + if(error_one & 0x0101) /* check first error correctable */ + process_ce(mci, error_one, info->dram_sec1_add, + info->dram_sec1_syndrome, error_found, + handle_error); + + if(error_next & 0x0101) /* check next error correctable */ + process_ce(mci, error_next, info->dram_sec2_add, + info->dram_sec2_syndrome, error_found, + handle_error); + + if(error_one & 0x4040) + process_ue_no_info_wr(mci, error_found, handle_error); + + if(error_next & 0x4040) + process_ue_no_info_wr(mci, error_found, handle_error); + + if(error_one & 0x2020) + process_ded_retry(mci, error_one, info->dram_retr_add, + error_found, handle_error); + + if(error_next & 0x2020) + process_ded_retry(mci, error_next, info->dram_retr_add, + error_found, handle_error); + + if(error_one & 0x0808) + process_threshold_ce(mci, error_one, error_found, + handle_error); + + if(error_next & 0x0808) + process_threshold_ce(mci, error_next, error_found, + handle_error); + + if(error_one & 0x0606) + process_ue(mci, error_one, info->dram_ded_add, + info->dram_scrb_add, error_found, handle_error); + + if(error_next & 0x0606) + process_ue(mci, error_next, info->dram_ded_add, + info->dram_scrb_add, error_found, handle_error); +} + +static void e752x_get_error_info (struct mem_ctl_info *mci, + struct e752x_error_info *info) +{ + struct pci_dev *dev; + struct e752x_pvt *pvt; + + memset(info, 0, sizeof(*info)); + pvt = (struct e752x_pvt *) mci->pvt_info; + dev = pvt->dev_d0f1; + + pci_read_config_dword(dev, E752X_FERR_GLOBAL, &info->ferr_global); + + if (info->ferr_global) { + pci_read_config_byte(dev, E752X_HI_FERR, &info->hi_ferr); + pci_read_config_word(dev, E752X_SYSBUS_FERR, + &info->sysbus_ferr); + pci_read_config_byte(dev, E752X_BUF_FERR, &info->buf_ferr); + pci_read_config_word(dev, E752X_DRAM_FERR, + &info->dram_ferr); + pci_read_config_dword(dev, E752X_DRAM_SEC1_ADD, + &info->dram_sec1_add); + pci_read_config_word(dev, E752X_DRAM_SEC1_SYNDROME, + &info->dram_sec1_syndrome); + pci_read_config_dword(dev, E752X_DRAM_DED_ADD, + &info->dram_ded_add); + pci_read_config_dword(dev, E752X_DRAM_SCRB_ADD, + &info->dram_scrb_add); + pci_read_config_dword(dev, E752X_DRAM_RETR_ADD, + &info->dram_retr_add); + + if (info->hi_ferr & 0x7f) + pci_write_config_byte(dev, E752X_HI_FERR, + info->hi_ferr); + + if (info->sysbus_ferr) + pci_write_config_word(dev, E752X_SYSBUS_FERR, + info->sysbus_ferr); + + if (info->buf_ferr & 0x0f) + pci_write_config_byte(dev, E752X_BUF_FERR, + info->buf_ferr); + + if (info->dram_ferr) + pci_write_bits16(pvt->bridge_ck, E752X_DRAM_FERR, + info->dram_ferr, info->dram_ferr); + + pci_write_config_dword(dev, E752X_FERR_GLOBAL, + info->ferr_global); + } + + pci_read_config_dword(dev, E752X_NERR_GLOBAL, &info->nerr_global); + + if (info->nerr_global) { + pci_read_config_byte(dev, E752X_HI_NERR, &info->hi_nerr); + pci_read_config_word(dev, E752X_SYSBUS_NERR, + &info->sysbus_nerr); + pci_read_config_byte(dev, E752X_BUF_NERR, &info->buf_nerr); + pci_read_config_word(dev, E752X_DRAM_NERR, + &info->dram_nerr); + pci_read_config_dword(dev, E752X_DRAM_SEC2_ADD, + &info->dram_sec2_add); + pci_read_config_word(dev, E752X_DRAM_SEC2_SYNDROME, + &info->dram_sec2_syndrome); + + if (info->hi_nerr & 0x7f) + pci_write_config_byte(dev, E752X_HI_NERR, + info->hi_nerr); + + if (info->sysbus_nerr) + pci_write_config_word(dev, E752X_SYSBUS_NERR, + info->sysbus_nerr); + + if (info->buf_nerr & 0x0f) + pci_write_config_byte(dev, E752X_BUF_NERR, + info->buf_nerr); + + if (info->dram_nerr) + pci_write_bits16(pvt->bridge_ck, E752X_DRAM_NERR, + info->dram_nerr, info->dram_nerr); + + pci_write_config_dword(dev, E752X_NERR_GLOBAL, + info->nerr_global); + } +} + +static int e752x_process_error_info (struct mem_ctl_info *mci, + struct e752x_error_info *info, int handle_errors) +{ + u32 error32, stat32; + int error_found; + + error_found = 0; + error32 = (info->ferr_global >> 18) & 0x3ff; + stat32 = (info->ferr_global >> 4) & 0x7ff; + + if (error32) + global_error(1, error32, &error_found, handle_errors); + + if (stat32) + global_error(0, stat32, &error_found, handle_errors); + + error32 = (info->nerr_global >> 18) & 0x3ff; + stat32 = (info->nerr_global >> 4) & 0x7ff; + + if (error32) + global_error(1, error32, &error_found, handle_errors); + + if (stat32) + global_error(0, stat32, &error_found, handle_errors); + + e752x_check_hub_interface(info, &error_found, handle_errors); + e752x_check_sysbus(info, &error_found, handle_errors); + e752x_check_membuf(info, &error_found, handle_errors); + e752x_check_dram(mci, info, &error_found, handle_errors); + return error_found; +} + +static void e752x_check(struct mem_ctl_info *mci) +{ + struct e752x_error_info info; + debugf3("MC: " __FILE__ ": %s()\n", __func__); + e752x_get_error_info(mci, &info); + e752x_process_error_info(mci, &info, 1); +} + +static int e752x_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc = -ENODEV; + int index; + u16 pci_data, stat; + u32 stat32; + u16 stat16; + u8 stat8; + struct mem_ctl_info *mci = NULL; + struct e752x_pvt *pvt = NULL; + u16 ddrcsr; + u32 drc; + int drc_chan; /* Number of channels 0=1chan,1=2chan */ + int drc_drbg; /* DRB granularity 0=64mb,1=128mb */ + int drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ + u32 dra; + unsigned long last_cumul_size; + struct pci_dev *pres_dev; + struct pci_dev *dev = NULL; + + debugf0("MC: " __FILE__ ": %s(): mci\n", __func__); + debugf0("Starting Probe1\n"); + + /* enable device 0 function 1 */ + pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8); + stat8 |= (1 << 5); + pci_write_config_byte(pdev, E752X_DEVPRES1, stat8); + + /* need to find out the number of channels */ + pci_read_config_dword(pdev, E752X_DRC, &drc); + pci_read_config_word(pdev, E752X_DDRCSR, &ddrcsr); + /* FIXME: should check >>12 or 0xf, true for all? */ + /* Dual channel = 1, Single channel = 0 */ + drc_chan = (((ddrcsr >> 12) & 3) == 3); + drc_drbg = drc_chan + 1; /* 128 in dual mode, 64 in single */ + drc_ddim = (drc >> 20) & 0x3; + + mci = edac_mc_alloc(sizeof(*pvt), E752X_NR_CSROWS, drc_chan + 1); + + if (mci == NULL) { + rc = -ENOMEM; + goto fail; + } + + debugf3("MC: " __FILE__ ": %s(): init mci\n", __func__); + + mci->mtype_cap = MEM_FLAG_RDDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED | + EDAC_FLAG_S4ECD4ED; + /* FIXME - what if different memory types are in different csrows? */ + mci->mod_name = BS_MOD_STR; + mci->mod_ver = "$Revision: 1.5.2.11 $"; + mci->pdev = pdev; + + debugf3("MC: " __FILE__ ": %s(): init pvt\n", __func__); + pvt = (struct e752x_pvt *) mci->pvt_info; + pvt->dev_info = &e752x_devs[dev_idx]; + pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL, + pvt->dev_info->err_dev, + pvt->bridge_ck); + if (pvt->bridge_ck == NULL) + pvt->bridge_ck = pci_scan_single_device(pdev->bus, + PCI_DEVFN(0, 1)); + if (pvt->bridge_ck == NULL) { + printk(KERN_ERR "MC: error reporting device not found:" + "vendor %x device 0x%x (broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev); + goto fail; + } + pvt->mc_symmetric = ((ddrcsr & 0x10) != 0); + + debugf3("MC: " __FILE__ ": %s(): more mci init\n", __func__); + mci->ctl_name = pvt->dev_info->ctl_name; + mci->edac_check = e752x_check; + mci->ctl_page_to_phys = ctl_page_to_phys; + + /* find out the device types */ + pci_read_config_dword(pdev, E752X_DRA, &dra); + + /* + * The dram row boundary (DRB) reg values are boundary address for + * each DRAM row with a granularity of 64 or 128MB (single/dual + * channel operation). DRB regs are cumulative; therefore DRB7 will + * contain the total memory contained in all eight rows. + */ + for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) { + u8 value; + u32 cumul_size; + /* mem_dev 0=x8, 1=x4 */ + int mem_dev = (dra >> (index * 4 + 2)) & 0x3; + struct csrow_info *csrow = &mci->csrows[index]; + + mem_dev = (mem_dev == 2); + pci_read_config_byte(mci->pdev, E752X_DRB + index, &value); + /* convert a 128 or 64 MiB DRB to a page size. */ + cumul_size = value << (25 + drc_drbg - PAGE_SHIFT); + debugf3("MC: " __FILE__ ": %s(): (%d) cumul_size 0x%x\n", + __func__, index, cumul_size); + if (cumul_size == last_cumul_size) + continue; /* not populated */ + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + csrow->nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */ + csrow->mtype = MEM_RDDR; /* only one type supported */ + csrow->dtype = mem_dev ? DEV_X4 : DEV_X8; + + /* + * if single channel or x8 devices then SECDED + * if dual channel and x4 then S4ECD4ED + */ + if (drc_ddim) { + if (drc_chan && mem_dev) { + csrow->edac_mode = EDAC_S4ECD4ED; + mci->edac_cap |= EDAC_FLAG_S4ECD4ED; + } else { + csrow->edac_mode = EDAC_SECDED; + mci->edac_cap |= EDAC_FLAG_SECDED; + } + } else + csrow->edac_mode = EDAC_NONE; + } + + /* Fill in the memory map table */ + { + u8 value; + u8 last = 0; + u8 row = 0; + for (index = 0; index < 8; index += 2) { + + pci_read_config_byte(mci->pdev, E752X_DRB + index, + &value); + /* test if there is a dimm in this slot */ + if (value == last) { + /* no dimm in the slot, so flag it as empty */ + pvt->map[index] = 0xff; + pvt->map[index + 1] = 0xff; + } else { /* there is a dimm in the slot */ + pvt->map[index] = row; + row++; + last = value; + /* test the next value to see if the dimm is + double sided */ + pci_read_config_byte(mci->pdev, + E752X_DRB + index + 1, + &value); + pvt->map[index + 1] = (value == last) ? + 0xff : /* the dimm is single sided, + so flag as empty */ + row; /* this is a double sided dimm + to save the next row # */ + row++; + last = value; + } + } + } + + /* set the map type. 1 = normal, 0 = reversed */ + pci_read_config_byte(mci->pdev, E752X_DRM, &stat8); + pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f)); + + mci->edac_cap |= EDAC_FLAG_NONE; + + debugf3("MC: " __FILE__ ": %s(): tolm, remapbase, remaplimit\n", + __func__); + /* load the top of low memory, remap base, and remap limit vars */ + pci_read_config_word(mci->pdev, E752X_TOLM, &pci_data); + pvt->tolm = ((u32) pci_data) << 4; + pci_read_config_word(mci->pdev, E752X_REMAPBASE, &pci_data); + pvt->remapbase = ((u32) pci_data) << 14; + pci_read_config_word(mci->pdev, E752X_REMAPLIMIT, &pci_data); + pvt->remaplimit = ((u32) pci_data) << 14; + printk("tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm, + pvt->remapbase, pvt->remaplimit); + + if (edac_mc_add_mc(mci)) { + debugf3("MC: " __FILE__ + ": %s(): failed edac_mc_add_mc()\n", + __func__); + goto fail; + } + + /* Walk through the PCI table and clear errors */ + switch (dev_idx) { + case E7520: + dev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_7520_0, NULL); + break; + case E7525: + dev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_7525_0, NULL); + break; + case E7320: + dev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_7320_0, NULL); + break; + } + + + pvt->dev_d0f0 = dev; + for (pres_dev = dev; + ((struct pci_dev *) pres_dev->global_list.next != dev); + pres_dev = (struct pci_dev *) pres_dev->global_list.next) { + pci_read_config_dword(pres_dev, PCI_COMMAND, &stat32); + stat = (u16) (stat32 >> 16); + /* clear any error bits */ + if (stat32 & ((1 << 6) + (1 << 8))) + pci_write_config_word(pres_dev, PCI_STATUS, stat); + } + /* find the error reporting device and clear errors */ + dev = pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck); + /* Turn off error disable & SMI in case the BIOS turned it on */ + pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00); + pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00); + pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x00); + pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00); + pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00); + pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00); + pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00); + pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00); + /* clear other MCH errors */ + pci_read_config_dword(dev, E752X_FERR_GLOBAL, &stat32); + pci_write_config_dword(dev, E752X_FERR_GLOBAL, stat32); + pci_read_config_dword(dev, E752X_NERR_GLOBAL, &stat32); + pci_write_config_dword(dev, E752X_NERR_GLOBAL, stat32); + pci_read_config_byte(dev, E752X_HI_FERR, &stat8); + pci_write_config_byte(dev, E752X_HI_FERR, stat8); + pci_read_config_byte(dev, E752X_HI_NERR, &stat8); + pci_write_config_byte(dev, E752X_HI_NERR, stat8); + pci_read_config_dword(dev, E752X_SYSBUS_FERR, &stat32); + pci_write_config_dword(dev, E752X_SYSBUS_FERR, stat32); + pci_read_config_byte(dev, E752X_BUF_FERR, &stat8); + pci_write_config_byte(dev, E752X_BUF_FERR, stat8); + pci_read_config_byte(dev, E752X_BUF_NERR, &stat8); + pci_write_config_byte(dev, E752X_BUF_NERR, stat8); + pci_read_config_word(dev, E752X_DRAM_FERR, &stat16); + pci_write_config_word(dev, E752X_DRAM_FERR, stat16); + pci_read_config_word(dev, E752X_DRAM_NERR, &stat16); + pci_write_config_word(dev, E752X_DRAM_NERR, stat16); + + /* get this far and it's successful */ + debugf3("MC: " __FILE__ ": %s(): success\n", __func__); + return 0; + +fail: + if (mci) { + if (pvt->dev_d0f0) + pci_dev_put(pvt->dev_d0f0); + if (pvt->dev_d0f1) + pci_dev_put(pvt->dev_d0f1); + if (pvt->bridge_ck) + pci_dev_put(pvt->bridge_ck); + edac_mc_free(mci); + } + return rc; +} + +/* returns count (>= 0), or negative on error */ +static int __devinit e752x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + /* wake up and enable device */ + if(pci_enable_device(pdev) < 0) + return -EIO; + return e752x_probe1(pdev, ent->driver_data); +} + + +static void __devexit e752x_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct e752x_pvt *pvt; + + debugf0(__FILE__ ": %s()\n", __func__); + + if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL) + return; + + if (edac_mc_del_mc(mci)) + return; + + pvt = (struct e752x_pvt *) mci->pvt_info; + pci_dev_put(pvt->dev_d0f0); + pci_dev_put(pvt->dev_d0f1); + pci_dev_put(pvt->bridge_ck); + edac_mc_free(mci); +} + + +static const struct pci_device_id e752x_pci_tbl[] __devinitdata = { + {PCI_VEND_DEV(INTEL, 7520_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7520}, + {PCI_VEND_DEV(INTEL, 7525_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7525}, + {PCI_VEND_DEV(INTEL, 7320_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7320}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, e752x_pci_tbl); + + +static struct pci_driver e752x_driver = { + name: BS_MOD_STR, + probe: e752x_init_one, + remove: __devexit_p(e752x_remove_one), + id_table: e752x_pci_tbl, +}; + + +int __init e752x_init(void) +{ + int pci_rc; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + pci_rc = pci_register_driver(&e752x_driver); + return (pci_rc < 0) ? pci_rc : 0; +} + + +static void __exit e752x_exit(void) +{ + debugf3("MC: " __FILE__ ": %s()\n", __func__); + pci_unregister_driver(&e752x_driver); +} + + +module_init(e752x_init); +module_exit(e752x_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n"); +MODULE_DESCRIPTION("MC support for Intel e752x memory controllers"); diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c new file mode 100644 index 000000000000..066be43f5ece --- /dev/null +++ b/drivers/edac/e7xxx_edac.c @@ -0,0 +1,558 @@ +/* + * Intel e7xxx Memory Controller kernel module + * (C) 2003 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * See "enum e7xxx_chips" below for supported chipsets + * + * Written by Thayne Harbaugh + * Based on work by Dan Hollis and others. + * http://www.anime.net/~goemon/linux-ecc/ + * + * Contributors: + * Eric Biederman (Linux Networx) + * Tom Zimmerman (Linux Networx) + * Jim Garlick (Lawrence Livermore National Labs) + * Dave Peterson (Lawrence Livermore National Labs) + * That One Guy (Some other place) + * Wang Zhenyu (intel.com) + * + * $Id: edac_e7xxx.c,v 1.5.2.9 2005/10/05 00:43:44 dsp_llnl Exp $ + * + */ + + +#include +#include +#include +#include +#include +#include +#include "edac_mc.h" + + +#ifndef PCI_DEVICE_ID_INTEL_7205_0 +#define PCI_DEVICE_ID_INTEL_7205_0 0x255d +#endif /* PCI_DEVICE_ID_INTEL_7205_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7205_1_ERR +#define PCI_DEVICE_ID_INTEL_7205_1_ERR 0x2551 +#endif /* PCI_DEVICE_ID_INTEL_7205_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7500_0 +#define PCI_DEVICE_ID_INTEL_7500_0 0x2540 +#endif /* PCI_DEVICE_ID_INTEL_7500_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7500_1_ERR +#define PCI_DEVICE_ID_INTEL_7500_1_ERR 0x2541 +#endif /* PCI_DEVICE_ID_INTEL_7500_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7501_0 +#define PCI_DEVICE_ID_INTEL_7501_0 0x254c +#endif /* PCI_DEVICE_ID_INTEL_7501_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7501_1_ERR +#define PCI_DEVICE_ID_INTEL_7501_1_ERR 0x2541 +#endif /* PCI_DEVICE_ID_INTEL_7501_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7505_0 +#define PCI_DEVICE_ID_INTEL_7505_0 0x2550 +#endif /* PCI_DEVICE_ID_INTEL_7505_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7505_1_ERR +#define PCI_DEVICE_ID_INTEL_7505_1_ERR 0x2551 +#endif /* PCI_DEVICE_ID_INTEL_7505_1_ERR */ + + +#define E7XXX_NR_CSROWS 8 /* number of csrows */ +#define E7XXX_NR_DIMMS 8 /* FIXME - is this correct? */ + + +/* E7XXX register addresses - device 0 function 0 */ +#define E7XXX_DRB 0x60 /* DRAM row boundary register (8b) */ +#define E7XXX_DRA 0x70 /* DRAM row attribute register (8b) */ + /* + * 31 Device width row 7 0=x8 1=x4 + * 27 Device width row 6 + * 23 Device width row 5 + * 19 Device width row 4 + * 15 Device width row 3 + * 11 Device width row 2 + * 7 Device width row 1 + * 3 Device width row 0 + */ +#define E7XXX_DRC 0x7C /* DRAM controller mode reg (32b) */ + /* + * 22 Number channels 0=1,1=2 + * 19:18 DRB Granularity 32/64MB + */ +#define E7XXX_TOLM 0xC4 /* DRAM top of low memory reg (16b) */ +#define E7XXX_REMAPBASE 0xC6 /* DRAM remap base address reg (16b) */ +#define E7XXX_REMAPLIMIT 0xC8 /* DRAM remap limit address reg (16b) */ + +/* E7XXX register addresses - device 0 function 1 */ +#define E7XXX_DRAM_FERR 0x80 /* DRAM first error register (8b) */ +#define E7XXX_DRAM_NERR 0x82 /* DRAM next error register (8b) */ +#define E7XXX_DRAM_CELOG_ADD 0xA0 /* DRAM first correctable memory */ + /* error address register (32b) */ + /* + * 31:28 Reserved + * 27:6 CE address (4k block 33:12) + * 5:0 Reserved + */ +#define E7XXX_DRAM_UELOG_ADD 0xB0 /* DRAM first uncorrectable memory */ + /* error address register (32b) */ + /* + * 31:28 Reserved + * 27:6 CE address (4k block 33:12) + * 5:0 Reserved + */ +#define E7XXX_DRAM_CELOG_SYNDROME 0xD0 /* DRAM first correctable memory */ + /* error syndrome register (16b) */ + +enum e7xxx_chips { + E7500 = 0, + E7501, + E7505, + E7205, +}; + + +struct e7xxx_pvt { + struct pci_dev *bridge_ck; + u32 tolm; + u32 remapbase; + u32 remaplimit; + const struct e7xxx_dev_info *dev_info; +}; + + +struct e7xxx_dev_info { + u16 err_dev; + const char *ctl_name; +}; + + +struct e7xxx_error_info { + u8 dram_ferr; + u8 dram_nerr; + u32 dram_celog_add; + u16 dram_celog_syndrome; + u32 dram_uelog_add; +}; + +static const struct e7xxx_dev_info e7xxx_devs[] = { + [E7500] = { + .err_dev = PCI_DEVICE_ID_INTEL_7500_1_ERR, + .ctl_name = "E7500"}, + [E7501] = { + .err_dev = PCI_DEVICE_ID_INTEL_7501_1_ERR, + .ctl_name = "E7501"}, + [E7505] = { + .err_dev = PCI_DEVICE_ID_INTEL_7505_1_ERR, + .ctl_name = "E7505"}, + [E7205] = { + .err_dev = PCI_DEVICE_ID_INTEL_7205_1_ERR, + .ctl_name = "E7205"}, +}; + + +/* FIXME - is this valid for both SECDED and S4ECD4ED? */ +static inline int e7xxx_find_channel(u16 syndrome) +{ + debugf3("MC: " __FILE__ ": %s()\n", __func__); + + if ((syndrome & 0xff00) == 0) + return 0; + if ((syndrome & 0x00ff) == 0) + return 1; + if ((syndrome & 0xf000) == 0 || (syndrome & 0x0f00) == 0) + return 0; + return 1; +} + + +static unsigned long +ctl_page_to_phys(struct mem_ctl_info *mci, unsigned long page) +{ + u32 remap; + struct e7xxx_pvt *pvt = (struct e7xxx_pvt *) mci->pvt_info; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + + if ((page < pvt->tolm) || + ((page >= 0x100000) && (page < pvt->remapbase))) + return page; + remap = (page - pvt->tolm) + pvt->remapbase; + if (remap < pvt->remaplimit) + return remap; + printk(KERN_ERR "Invalid page %lx - out of range\n", page); + return pvt->tolm - 1; +} + + +static void process_ce(struct mem_ctl_info *mci, struct e7xxx_error_info *info) +{ + u32 error_1b, page; + u16 syndrome; + int row; + int channel; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + + /* read the error address */ + error_1b = info->dram_celog_add; + /* FIXME - should use PAGE_SHIFT */ + page = error_1b >> 6; /* convert the address to 4k page */ + /* read the syndrome */ + syndrome = info->dram_celog_syndrome; + /* FIXME - check for -1 */ + row = edac_mc_find_csrow_by_page(mci, page); + /* convert syndrome to channel */ + channel = e7xxx_find_channel(syndrome); + edac_mc_handle_ce(mci, page, 0, syndrome, row, channel, + "e7xxx CE"); +} + + +static void process_ce_no_info(struct mem_ctl_info *mci) +{ + debugf3("MC: " __FILE__ ": %s()\n", __func__); + edac_mc_handle_ce_no_info(mci, "e7xxx CE log register overflow"); +} + + +static void process_ue(struct mem_ctl_info *mci, struct e7xxx_error_info *info) +{ + u32 error_2b, block_page; + int row; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + + /* read the error address */ + error_2b = info->dram_uelog_add; + /* FIXME - should use PAGE_SHIFT */ + block_page = error_2b >> 6; /* convert to 4k address */ + row = edac_mc_find_csrow_by_page(mci, block_page); + edac_mc_handle_ue(mci, block_page, 0, row, "e7xxx UE"); +} + + +static void process_ue_no_info(struct mem_ctl_info *mci) +{ + debugf3("MC: " __FILE__ ": %s()\n", __func__); + edac_mc_handle_ue_no_info(mci, "e7xxx UE log register overflow"); +} + + +static void e7xxx_get_error_info (struct mem_ctl_info *mci, + struct e7xxx_error_info *info) +{ + struct e7xxx_pvt *pvt; + + pvt = (struct e7xxx_pvt *) mci->pvt_info; + pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_FERR, + &info->dram_ferr); + pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_NERR, + &info->dram_nerr); + + if ((info->dram_ferr & 1) || (info->dram_nerr & 1)) { + pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_CELOG_ADD, + &info->dram_celog_add); + pci_read_config_word(pvt->bridge_ck, + E7XXX_DRAM_CELOG_SYNDROME, &info->dram_celog_syndrome); + } + + if ((info->dram_ferr & 2) || (info->dram_nerr & 2)) + pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_UELOG_ADD, + &info->dram_uelog_add); + + if (info->dram_ferr & 3) + pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_FERR, 0x03, + 0x03); + + if (info->dram_nerr & 3) + pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_NERR, 0x03, + 0x03); +} + + +static int e7xxx_process_error_info (struct mem_ctl_info *mci, + struct e7xxx_error_info *info, int handle_errors) +{ + int error_found; + + error_found = 0; + + /* decode and report errors */ + if (info->dram_ferr & 1) { /* check first error correctable */ + error_found = 1; + + if (handle_errors) + process_ce(mci, info); + } + + if (info->dram_ferr & 2) { /* check first error uncorrectable */ + error_found = 1; + + if (handle_errors) + process_ue(mci, info); + } + + if (info->dram_nerr & 1) { /* check next error correctable */ + error_found = 1; + + if (handle_errors) { + if (info->dram_ferr & 1) + process_ce_no_info(mci); + else + process_ce(mci, info); + } + } + + if (info->dram_nerr & 2) { /* check next error uncorrectable */ + error_found = 1; + + if (handle_errors) { + if (info->dram_ferr & 2) + process_ue_no_info(mci); + else + process_ue(mci, info); + } + } + + return error_found; +} + + +static void e7xxx_check(struct mem_ctl_info *mci) +{ + struct e7xxx_error_info info; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + e7xxx_get_error_info(mci, &info); + e7xxx_process_error_info(mci, &info, 1); +} + + +static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc = -ENODEV; + int index; + u16 pci_data; + struct mem_ctl_info *mci = NULL; + struct e7xxx_pvt *pvt = NULL; + u32 drc; + int drc_chan = 1; /* Number of channels 0=1chan,1=2chan */ + int drc_drbg = 1; /* DRB granularity 0=32mb,1=64mb */ + int drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ + u32 dra; + unsigned long last_cumul_size; + + + debugf0("MC: " __FILE__ ": %s(): mci\n", __func__); + + /* need to find out the number of channels */ + pci_read_config_dword(pdev, E7XXX_DRC, &drc); + /* only e7501 can be single channel */ + if (dev_idx == E7501) { + drc_chan = ((drc >> 22) & 0x1); + drc_drbg = (drc >> 18) & 0x3; + } + drc_ddim = (drc >> 20) & 0x3; + + mci = edac_mc_alloc(sizeof(*pvt), E7XXX_NR_CSROWS, drc_chan + 1); + + if (mci == NULL) { + rc = -ENOMEM; + goto fail; + } + + debugf3("MC: " __FILE__ ": %s(): init mci\n", __func__); + + mci->mtype_cap = MEM_FLAG_RDDR; + mci->edac_ctl_cap = + EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED; + /* FIXME - what if different memory types are in different csrows? */ + mci->mod_name = BS_MOD_STR; + mci->mod_ver = "$Revision: 1.5.2.9 $"; + mci->pdev = pdev; + + debugf3("MC: " __FILE__ ": %s(): init pvt\n", __func__); + pvt = (struct e7xxx_pvt *) mci->pvt_info; + pvt->dev_info = &e7xxx_devs[dev_idx]; + pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL, + pvt->dev_info->err_dev, + pvt->bridge_ck); + if (!pvt->bridge_ck) { + printk(KERN_ERR + "MC: error reporting device not found:" + "vendor %x device 0x%x (broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, e7xxx_devs[dev_idx].err_dev); + goto fail; + } + + debugf3("MC: " __FILE__ ": %s(): more mci init\n", __func__); + mci->ctl_name = pvt->dev_info->ctl_name; + + mci->edac_check = e7xxx_check; + mci->ctl_page_to_phys = ctl_page_to_phys; + + /* find out the device types */ + pci_read_config_dword(pdev, E7XXX_DRA, &dra); + + /* + * The dram row boundary (DRB) reg values are boundary address + * for each DRAM row with a granularity of 32 or 64MB (single/dual + * channel operation). DRB regs are cumulative; therefore DRB7 will + * contain the total memory contained in all eight rows. + */ + for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) { + u8 value; + u32 cumul_size; + /* mem_dev 0=x8, 1=x4 */ + int mem_dev = (dra >> (index * 4 + 3)) & 0x1; + struct csrow_info *csrow = &mci->csrows[index]; + + pci_read_config_byte(mci->pdev, E7XXX_DRB + index, &value); + /* convert a 64 or 32 MiB DRB to a page size. */ + cumul_size = value << (25 + drc_drbg - PAGE_SHIFT); + debugf3("MC: " __FILE__ ": %s(): (%d) cumul_size 0x%x\n", + __func__, index, cumul_size); + if (cumul_size == last_cumul_size) + continue; /* not populated */ + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + csrow->nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */ + csrow->mtype = MEM_RDDR; /* only one type supported */ + csrow->dtype = mem_dev ? DEV_X4 : DEV_X8; + + /* + * if single channel or x8 devices then SECDED + * if dual channel and x4 then S4ECD4ED + */ + if (drc_ddim) { + if (drc_chan && mem_dev) { + csrow->edac_mode = EDAC_S4ECD4ED; + mci->edac_cap |= EDAC_FLAG_S4ECD4ED; + } else { + csrow->edac_mode = EDAC_SECDED; + mci->edac_cap |= EDAC_FLAG_SECDED; + } + } else + csrow->edac_mode = EDAC_NONE; + } + + mci->edac_cap |= EDAC_FLAG_NONE; + + debugf3("MC: " __FILE__ ": %s(): tolm, remapbase, remaplimit\n", + __func__); + /* load the top of low memory, remap base, and remap limit vars */ + pci_read_config_word(mci->pdev, E7XXX_TOLM, &pci_data); + pvt->tolm = ((u32) pci_data) << 4; + pci_read_config_word(mci->pdev, E7XXX_REMAPBASE, &pci_data); + pvt->remapbase = ((u32) pci_data) << 14; + pci_read_config_word(mci->pdev, E7XXX_REMAPLIMIT, &pci_data); + pvt->remaplimit = ((u32) pci_data) << 14; + printk("tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm, + pvt->remapbase, pvt->remaplimit); + + /* clear any pending errors, or initial state bits */ + pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_FERR, 0x03, 0x03); + pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_NERR, 0x03, 0x03); + + if (edac_mc_add_mc(mci) != 0) { + debugf3("MC: " __FILE__ + ": %s(): failed edac_mc_add_mc()\n", + __func__); + goto fail; + } + + /* get this far and it's successful */ + debugf3("MC: " __FILE__ ": %s(): success\n", __func__); + return 0; + +fail: + if (mci != NULL) { + if(pvt != NULL && pvt->bridge_ck) + pci_dev_put(pvt->bridge_ck); + edac_mc_free(mci); + } + + return rc; +} + +/* returns count (>= 0), or negative on error */ +static int __devinit +e7xxx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + /* wake up and enable device */ + return pci_enable_device(pdev) ? + -EIO : e7xxx_probe1(pdev, ent->driver_data); +} + + +static void __devexit e7xxx_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct e7xxx_pvt *pvt; + + debugf0(__FILE__ ": %s()\n", __func__); + + if (((mci = edac_mc_find_mci_by_pdev(pdev)) != 0) && + edac_mc_del_mc(mci)) { + pvt = (struct e7xxx_pvt *) mci->pvt_info; + pci_dev_put(pvt->bridge_ck); + edac_mc_free(mci); + } +} + + +static const struct pci_device_id e7xxx_pci_tbl[] __devinitdata = { + {PCI_VEND_DEV(INTEL, 7205_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7205}, + {PCI_VEND_DEV(INTEL, 7500_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7500}, + {PCI_VEND_DEV(INTEL, 7501_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7501}, + {PCI_VEND_DEV(INTEL, 7505_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7505}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl); + + +static struct pci_driver e7xxx_driver = { + .name = BS_MOD_STR, + .probe = e7xxx_init_one, + .remove = __devexit_p(e7xxx_remove_one), + .id_table = e7xxx_pci_tbl, +}; + + +int __init e7xxx_init(void) +{ + return pci_register_driver(&e7xxx_driver); +} + + +static void __exit e7xxx_exit(void) +{ + pci_unregister_driver(&e7xxx_driver); +} + +module_init(e7xxx_init); +module_exit(e7xxx_exit); + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh et al\n" + "Based on.work by Dan Hollis et al"); +MODULE_DESCRIPTION("MC support for Intel e7xxx memory controllers");