tg3: Create phy_flags and migrate phy_is_low_power

This patch deletes the link_config.phy_is_low_power flag and creates a
new phy_flags device member to store all phy related settings.  All the
code is converted accordingly.

Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Matt Carlson 2010-08-02 11:26:06 +00:00 committed by David S. Miller
parent f08aa1a8b8
commit 80096068bc
2 changed files with 20 additions and 19 deletions

View File

@ -1543,8 +1543,8 @@ static void tg3_phy_start(struct tg3 *tp)
phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
if (tp->link_config.phy_is_low_power) {
tp->link_config.phy_is_low_power = 0;
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
tp->phy_flags &= ~TG3_PHYFLG_IS_LOW_POWER;
phydev->speed = tp->link_config.orig_speed;
phydev->duplex = tp->link_config.orig_duplex;
phydev->autoneg = tp->link_config.orig_autoneg;
@ -2559,13 +2559,13 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
do_low_power = false;
if ((tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) &&
!tp->link_config.phy_is_low_power) {
!(tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
struct phy_device *phydev;
u32 phyid, advertising;
phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
tp->link_config.phy_is_low_power = 1;
tp->phy_flags |= TG3_PHYFLG_IS_LOW_POWER;
tp->link_config.orig_speed = phydev->speed;
tp->link_config.orig_duplex = phydev->duplex;
@ -2604,8 +2604,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
} else {
do_low_power = true;
if (tp->link_config.phy_is_low_power == 0) {
tp->link_config.phy_is_low_power = 1;
if (!(tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
tp->phy_flags |= TG3_PHYFLG_IS_LOW_POWER;
tp->link_config.orig_speed = tp->link_config.speed;
tp->link_config.orig_duplex = tp->link_config.duplex;
tp->link_config.orig_autoneg = tp->link_config.autoneg;
@ -2836,7 +2836,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
u32 new_adv;
int i;
if (tp->link_config.phy_is_low_power) {
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
/* Entering low power mode. Disable gigabit and
* 100baseT advertisements.
*/
@ -3237,7 +3237,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
}
relink:
if (current_link_up == 0 || tp->link_config.phy_is_low_power) {
if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
u32 tmp;
tg3_phy_copper_begin(tp);
@ -8320,8 +8320,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
}
if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
if (tp->link_config.phy_is_low_power) {
tp->link_config.phy_is_low_power = 0;
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
tp->phy_flags &= ~TG3_PHYFLG_IS_LOW_POWER;
tp->link_config.speed = tp->link_config.orig_speed;
tp->link_config.duplex = tp->link_config.orig_duplex;
tp->link_config.autoneg = tp->link_config.orig_autoneg;
@ -9368,7 +9368,7 @@ static void tg3_get_regs(struct net_device *dev,
memset(p, 0, TG3_REGDUMP_LEN);
if (tp->link_config.phy_is_low_power)
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
return;
tg3_full_lock(tp, 0);
@ -9447,7 +9447,7 @@ static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
return -EINVAL;
if (tp->link_config.phy_is_low_power)
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
return -EAGAIN;
offset = eeprom->offset;
@ -9509,7 +9509,7 @@ static int tg3_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
u8 *buf;
__be32 start, end;
if (tp->link_config.phy_is_low_power)
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
return -EAGAIN;
if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
@ -10849,7 +10849,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
{
struct tg3 *tp = netdev_priv(dev);
if (tp->link_config.phy_is_low_power)
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
tg3_set_power_state(tp, PCI_D0);
memset(data, 0, sizeof(u64) * TG3_NUM_TEST);
@ -10917,7 +10917,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
if (irq_sync && !err2)
tg3_phy_start(tp);
}
if (tp->link_config.phy_is_low_power)
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
tg3_set_power_state(tp, PCI_D3hot);
}
@ -10947,7 +10947,7 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
break; /* We have no PHY */
if (tp->link_config.phy_is_low_power)
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
return -EAGAIN;
spin_lock_bh(&tp->lock);
@ -10963,7 +10963,7 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
break; /* We have no PHY */
if (tp->link_config.phy_is_low_power)
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
return -EAGAIN;
spin_lock_bh(&tp->lock);
@ -14109,7 +14109,6 @@ static void __devinit tg3_init_link_config(struct tg3 *tp)
tp->link_config.autoneg = AUTONEG_ENABLE;
tp->link_config.active_speed = SPEED_INVALID;
tp->link_config.active_duplex = DUPLEX_INVALID;
tp->link_config.phy_is_low_power = 0;
tp->link_config.orig_speed = SPEED_INVALID;
tp->link_config.orig_duplex = DUPLEX_INVALID;
tp->link_config.orig_autoneg = AUTONEG_INVALID;

View File

@ -2534,7 +2534,6 @@ struct tg3_link_config {
/* When we go in and out of low power mode we need
* to swap with this state.
*/
int phy_is_low_power;
u16 orig_speed;
u8 orig_duplex;
u8 orig_autoneg;
@ -2965,6 +2964,9 @@ struct tg3 {
(X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM5719C || \
(X) == TG3_PHY_ID_BCM8002)
u32 phy_flags;
#define TG3_PHYFLG_IS_LOW_POWER 0x00000001
u32 led_ctrl;
u32 phy_otp;