ASoC: SOF: Intel: hda: make sure DMA is start/stop by read the RUN bit

As per the HW recommendation, after setting the RUN bit
(start as 1, stop as 0), software must read the bit back
to make sure the bit is set right, before modifying related
control registers/re-starting the DMA engine.

Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Zhu Yingjiang 2019-06-12 12:23:46 -05:00 committed by Mark Brown
parent 3a39e0eae8
commit 7bcaf0f2cd
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
2 changed files with 28 additions and 0 deletions

View File

@ -217,6 +217,9 @@ int hda_dsp_stream_trigger(struct snd_sof_dev *sdev,
{
struct hdac_stream *hstream = &stream->hstream;
int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
u32 dma_start = SOF_HDA_SD_CTL_DMA_START;
int ret;
u32 run;
/* cmd must be for audio stream */
switch (cmd) {
@ -234,6 +237,16 @@ int hda_dsp_stream_trigger(struct snd_sof_dev *sdev,
SOF_HDA_SD_CTL_DMA_START |
SOF_HDA_CL_DMA_SD_INT_MASK);
ret = snd_sof_dsp_read_poll_timeout(sdev,
HDA_DSP_HDA_BAR,
sd_offset, run,
((run & dma_start) == dma_start),
HDA_DSP_REG_POLL_INTERVAL_US,
HDA_DSP_STREAM_RUN_TIMEOUT);
if (ret)
return ret;
hstream->running = true;
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
@ -244,6 +257,15 @@ int hda_dsp_stream_trigger(struct snd_sof_dev *sdev,
SOF_HDA_SD_CTL_DMA_START |
SOF_HDA_CL_DMA_SD_INT_MASK, 0x0);
ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_HDA_BAR,
sd_offset, run,
!(run & dma_start),
HDA_DSP_REG_POLL_INTERVAL_US,
HDA_DSP_STREAM_RUN_TIMEOUT);
if (ret)
return ret;
snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, sd_offset +
SOF_HDA_ADSP_REG_CL_SD_STS,
SOF_HDA_CL_DMA_SD_INT_MASK);

View File

@ -159,6 +159,12 @@
#define HDA_DSP_MBOX_UPLINK_OFFSET 0x81000
#define HDA_DSP_STREAM_RESET_TIMEOUT 300
/*
* Timeout in us, for setting the stream RUN bit, during
* start/stop the stream. The timeout expires if new RUN bit
* value cannot be read back within the specified time.
*/
#define HDA_DSP_STREAM_RUN_TIMEOUT 300
#define HDA_DSP_CL_TRIGGER_TIMEOUT 300
#define HDA_DSP_SPIB_ENABLE 1