From 79f678edfe48db1f234b8de41e24987d6d25ac1a Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Thu, 15 Nov 2012 17:43:33 +0530 Subject: [PATCH] i2c: s3c2410: do not special case HDMIPHY stuck bus detection Commit "i2c-s3c2410: Add HDMIPHY quirk for S3C2440" added support for HDMIPHY with some special handling in s3c24xx_i2c_set_master: "due to unknown reason (probably HW bug in HDMIPHY and/or the controller) a transfer fails to finish. The controller hangs after sending the last byte, the workaround for this bug is resetting the controller after each transfer" The "unknown reason" was that the proper sequence for generating a STOP condition wasn't being followed as per the datasheet. Since this is fixed by "PATCH: i2c-s3c2410: do not generate STOP for QUIRK_HDMIPHY buses", remove the special handling. Signed-off-by: Daniel Kurtz Signed-off-by: Naveen Krishna Chatradhi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-s3c2410.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index dd93d3d6510a..081e261ac847 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -532,13 +532,6 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) unsigned long iicstat; int timeout = 400; - /* the timeout for HDMIPHY is reduced to 10 ms because - * the hangup is expected to happen, so waiting 400 ms - * causes only unnecessary system hangup - */ - if (i2c->quirks & QUIRK_HDMIPHY) - timeout = 10; - while (timeout-- > 0) { iicstat = readl(i2c->regs + S3C2410_IICSTAT); @@ -548,15 +541,6 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) msleep(1); } - /* hang-up of bus dedicated for HDMIPHY occurred, resetting */ - if (i2c->quirks & QUIRK_HDMIPHY) { - writel(0, i2c->regs + S3C2410_IICCON); - writel(0, i2c->regs + S3C2410_IICSTAT); - writel(0, i2c->regs + S3C2410_IICDS); - - return 0; - } - return -ETIMEDOUT; }