bus: imx-weim: optionally enable burst clock mode

To enable burst clock mode, add the fsl,burst-clk-enable
property to the weim bus's devicetree node.

Example:
weim: weim@21b8000 {
	compatible = "fsl,imx6q-weim";
	reg = <0x021b8000 0x4000>;
	clocks = <&clks 196>;
	#address-cells = <2>;
	#size-cells = <1>;
	ranges = <0 0 0x08000000 0x08000000>;
	fsl,weim-cs-gpr = <&gpr>;
	fsl,burst-clk-enable;

	client-device@0,0 {
		compatible = "something";
		reg = <0 0 0x02000000>;
		#address-cells = <1>;
		#size-cells = <1>;
		bank-width = <2>;
		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
				0x0000c000 0x1404a38e 0x00000000>;
	};
};

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Sven Van Asbroeck 2019-07-12 16:43:15 -04:00 committed by Shawn Guo
parent d43dc52274
commit 77266e722f

View File

@ -19,6 +19,8 @@ struct imx_weim_devtype {
unsigned int cs_count;
unsigned int cs_regs_count;
unsigned int cs_stride;
unsigned int wcr_offset;
unsigned int wcr_bcm;
};
static const struct imx_weim_devtype imx1_weim_devtype = {
@ -37,6 +39,8 @@ static const struct imx_weim_devtype imx50_weim_devtype = {
.cs_count = 4,
.cs_regs_count = 6,
.cs_stride = 0x18,
.wcr_offset = 0x90,
.wcr_bcm = BIT(0),
};
static const struct imx_weim_devtype imx51_weim_devtype = {
@ -192,6 +196,7 @@ static int __init weim_parse_dt(struct platform_device *pdev,
struct device_node *child;
int ret, have_child = 0;
struct cs_timing_state ts = {};
u32 reg;
if (devtype == &imx50_weim_devtype) {
ret = imx_weim_gpr_setup(pdev);
@ -199,6 +204,17 @@ static int __init weim_parse_dt(struct platform_device *pdev,
return ret;
}
if (of_property_read_bool(pdev->dev.of_node, "fsl,burst-clk-enable")) {
if (devtype->wcr_bcm) {
reg = readl(base + devtype->wcr_offset);
writel(reg | devtype->wcr_bcm,
base + devtype->wcr_offset);
} else {
dev_err(&pdev->dev, "burst clk mode not supported.\n");
return -EINVAL;
}
}
for_each_available_child_of_node(pdev->dev.of_node, child) {
ret = weim_timing_setup(&pdev->dev, child, base, devtype, &ts);
if (ret)