Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - several device tree bindings for input devices have been converted to
   yaml

 - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers

 - analog joystick has been converted to use ktime API and no longer
   warn about low resolution timers

 - a few driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: analog - always use ktime functions
  Input: mms114 - support MMS134S
  Input: elan_i2c - reduce the resume time for controller in Whitebox
  Input: edt-ft5x06 - added case for EDT EP0110M09
  Input: adc-keys - drop bogus __refdata annotation
  Input: Fix spelling mistake in Kconfig "useable" -> "usable"
  Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
  Input: remove dead CSR Prima2 PWRC driver
  Input: adp5589-keys - use the right header
  Input: adp5588-keys - use the right header
  dt-bindings: input: tsc2005: Convert to YAML schema
  Input: ep93xx_keypad - prepare clock before using it
  dt-bindings: input: sun4i-lradc: Add wakeup-source
  dt-bindings: input: Convert Regulator Haptic binding to a schema
  dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
  dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
  Input: pm8941-pwrkey - fix comma vs semicolon issue
  dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
  dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
  dt-bindings: power: reset: Change 'additionalProperties' to true
  ...
This commit is contained in:
Linus Torvalds 2021-09-11 09:08:28 -07:00
commit 765092e4cd
31 changed files with 472 additions and 799 deletions

View File

@ -29,6 +29,8 @@ properties:
description:
Regulator for the LRADC reference voltage
wakeup-source: true
patternProperties:
"^button-[0-9]+$":
type: object

View File

@ -1,55 +0,0 @@
Qualcomm PM8941 PMIC Power Key
PROPERTIES
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,pm8941-pwrkey"
"qcom,pm8941-resin"
"qcom,pmk8350-pwrkey"
"qcom,pmk8350-resin"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: base address of registers for block
- interrupts:
Usage: required
Value type: <prop-encoded-array>
Definition: key change interrupt; The format of the specifier is
defined by the binding document describing the node's
interrupt parent.
- debounce:
Usage: optional
Value type: <u32>
Definition: time in microseconds that key must be pressed or released
for state change interrupt to trigger.
- bias-pull-up:
Usage: optional
Value type: <empty>
Definition: presence of this property indicates that the KPDPWR_N pin
should be configured for pull up.
- linux,code:
Usage: optional
Value type: <u32>
Definition: The input key-code associated with the power key.
Use the linux event codes defined in
include/dt-bindings/input/linux-event-codes.h
When property is omitted KEY_POWER is assumed.
EXAMPLE
pwrkey@800 {
compatible = "qcom,pm8941-pwrkey";
reg = <0x800>;
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};

View File

@ -0,0 +1,51 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/qcom,pm8941-pwrkey.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm PM8941 PMIC Power Key
maintainers:
- Courtney Cavin <courtney.cavin@sonymobile.com>
- Vinod Koul <vkoul@kernel.org>
allOf:
- $ref: input.yaml#
properties:
compatible:
enum:
- qcom,pm8941-pwrkey
- qcom,pm8941-resin
- qcom,pmk8350-pwrkey
- qcom,pmk8350-resin
interrupts:
maxItems: 1
debounce:
description: |
Time in microseconds that key must be pressed or
released for state change interrupt to trigger.
$ref: /schemas/types.yaml#/definitions/uint32
bias-pull-up:
description: |
Presence of this property indicates that the KPDPWR_N
pin should be configured for pull up.
$ref: /schemas/types.yaml#/definitions/flag
linux,code:
description: |
The input key-code associated with the power key.
Use the linux event codes defined in
include/dt-bindings/input/linux-event-codes.h
When property is omitted KEY_POWER is assumed.
required:
- compatible
- interrupts
unevaluatedProperties: false
...

View File

@ -1,21 +0,0 @@
* Regulator Haptic Device Tree Bindings
Required Properties:
- compatible : Should be "regulator-haptic"
- haptic-supply : Power supply to the haptic motor.
[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
- max-microvolt : The maximum voltage value supplied to the haptic motor.
[The unit of the voltage is a micro]
- min-microvolt : The minimum voltage value supplied to the haptic motor.
[The unit of the voltage is a micro]
Example:
haptics {
compatible = "regulator-haptic";
haptic-supply = <&motor_regulator>;
max-microvolt = <2700000>;
min-microvolt = <1100000>;
};

View File

@ -0,0 +1,43 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: "http://devicetree.org/schemas/input/regulator-haptic.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Regulator Haptic Device Tree Bindings
maintainers:
- Jaewon Kim <jaewon02.kim@samsung.com>
properties:
compatible:
const: regulator-haptic
haptic-supply:
description: >
Power supply to the haptic motor
max-microvolt:
description: >
The maximum voltage value supplied to the haptic motor
min-microvolt:
description: >
The minimum voltage value supplied to the haptic motor
required:
- compatible
- haptic-supply
- max-microvolt
- min-microvolt
additionalProperties: false
examples:
- |
haptics {
compatible = "regulator-haptic";
haptic-supply = <&motor_regulator>;
max-microvolt = <2700000>;
min-microvolt = <1100000>;
};

View File

@ -0,0 +1,62 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings
maintainers:
- Dmitry Torokhov <dmitry.torokhov@gmail.com>
allOf:
- $ref: touchscreen.yaml#
properties:
compatible:
const: chipone,icn8318
reg:
maxItems: 1
interrupts:
maxItems: 1
wake-gpios:
maxItems: 1
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- wake-gpios
- touchscreen-size-x
- touchscreen-size-y
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
touchscreen@40 {
compatible = "chipone,icn8318";
reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
pinctrl-names = "default";
pinctrl-0 = <&ts_wake_pin_p66>;
wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
touchscreen-size-x = <800>;
touchscreen-size-y = <480>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
};
};
...

View File

@ -1,44 +0,0 @@
* ChipOne icn8318 I2C touchscreen controller
Required properties:
- compatible : "chipone,icn8318"
- reg : I2C slave address of the chip (0x40)
- interrupts : interrupt specification for the icn8318 interrupt
- wake-gpios : GPIO specification for the WAKE input
- touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
- touchscreen-size-y : vertical resolution of touchscreen (in pixels)
Optional properties:
- pinctrl-names : should be "default"
- pinctrl-0: : a phandle pointing to the pin settings for the
control gpios
- touchscreen-fuzz-x : horizontal noise value of the absolute input
device (in pixels)
- touchscreen-fuzz-y : vertical noise value of the absolute input
device (in pixels)
- touchscreen-inverted-x : X axis is inverted (boolean)
- touchscreen-inverted-y : Y axis is inverted (boolean)
- touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
Swapping is done after inverting the axis
Example:
i2c@00000000 {
/* ... */
chipone_icn8318@40 {
compatible = "chipone,icn8318";
reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
pinctrl-names = "default";
pinctrl-0 = <&ts_wake_pin_p66>;
wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
touchscreen-size-x = <800>;
touchscreen-size-y = <480>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
};
/* ... */
};

View File

@ -0,0 +1,68 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Pixcir Touchscreen Controller Device Tree Bindings
maintainers:
- Dmitry Torokhov <dmitry.torokhov@gmail.com>
allOf:
- $ref: touchscreen.yaml#
properties:
compatible:
enum:
- pixcir,pixcir_ts
- pixcir,pixcir_tangoc
reg:
maxItems: 1
interrupts:
maxItems: 1
attb-gpio:
maxItems: 1
reset-gpios:
maxItems: 1
enable-gpios:
maxItems: 1
wake-gpios:
maxItems: 1
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- attb-gpio
- touchscreen-size-x
- touchscreen-size-y
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
touchscreen@5c {
compatible = "pixcir,pixcir_ts";
reg = <0x5c>;
interrupts = <2 0>;
attb-gpio = <&gpf 2 0 2>;
touchscreen-size-x = <800>;
touchscreen-size-y = <600>;
};
};
...

View File

@ -1,31 +0,0 @@
* Pixcir I2C touchscreen controllers
Required properties:
- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
- reg: I2C address of the chip
- interrupts: interrupt to which the chip is connected
- attb-gpio: GPIO connected to the ATTB line of the chip
- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
Optional properties:
- reset-gpios: GPIO connected to the RESET line of the chip
- enable-gpios: GPIO connected to the ENABLE line of the chip
- wake-gpios: GPIO connected to the WAKE line of the chip
Example:
i2c@00000000 {
/* ... */
pixcir_ts@5c {
compatible = "pixcir,pixcir_ts";
reg = <0x5c>;
interrupts = <2 0>;
attb-gpio = <&gpf 2 0 2>;
touchscreen-size-x = <800>;
touchscreen-size-y = <600>;
};
/* ... */
};

View File

@ -0,0 +1,128 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings
maintainers:
- Marek Vasut <marex@denx.de>
- Michael Welling <mwelling@ieee.org>
properties:
$nodename:
pattern: "^touchscreen(@.*)?$"
compatible:
enum:
- ti,tsc2004
- ti,tsc2005
reg:
maxItems: 1
description: |
I2C address when used on the I2C bus, or the SPI chip select index
when used on the SPI bus
interrupts:
maxItems: 1
reset-gpios:
maxItems: 1
description: GPIO specifier for the controller reset line
spi-max-frequency:
description: TSC2005 SPI bus clock frequency.
maximum: 25000000
ti,x-plate-ohms:
description: resistance of the touchscreen's X plates in ohm (defaults to 280)
ti,esd-recovery-timeout-ms:
description: |
if the touchscreen does not respond after the configured time
(in milli seconds), the driver will reset it. This is disabled
by default.
vio-supply:
description: Regulator specifier
touchscreen-fuzz-pressure: true
touchscreen-fuzz-x: true
touchscreen-fuzz-y: true
touchscreen-max-pressure: true
touchscreen-size-x: true
touchscreen-size-y: true
allOf:
- $ref: touchscreen.yaml#
- if:
properties:
compatible:
contains:
const: ti,tsc2004
then:
properties:
spi-max-frequency: false
additionalProperties: false
required:
- compatible
- reg
- interrupts
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
touchscreen@48 {
compatible = "ti,tsc2004";
reg = <0x48>;
vio-supply = <&vio>;
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
touchscreen-fuzz-x = <4>;
touchscreen-fuzz-y = <7>;
touchscreen-fuzz-pressure = <2>;
touchscreen-size-x = <4096>;
touchscreen-size-y = <4096>;
touchscreen-max-pressure = <2048>;
ti,x-plate-ohms = <280>;
ti,esd-recovery-timeout-ms = <8000>;
};
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
touchscreen@0 {
compatible = "ti,tsc2005";
spi-max-frequency = <6000000>;
reg = <0>;
vio-supply = <&vio>;
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
touchscreen-fuzz-x = <4>;
touchscreen-fuzz-y = <7>;
touchscreen-fuzz-pressure = <2>;
touchscreen-size-x = <4096>;
touchscreen-size-y = <4096>;
touchscreen-max-pressure = <2048>;
ti,x-plate-ohms = <280>;
ti,esd-recovery-timeout-ms = <8000>;
};
};

View File

@ -1,64 +0,0 @@
* Texas Instruments tsc2004 and tsc2005 touchscreen controllers
Required properties:
- compatible : "ti,tsc2004" or "ti,tsc2005"
- reg : Device address
- interrupts : IRQ specifier
- spi-max-frequency : Maximum SPI clocking speed of the device
(for tsc2005)
Optional properties:
- vio-supply : Regulator specifier
- reset-gpios : GPIO specifier for the controller reset line
- ti,x-plate-ohms : integer, resistance of the touchscreen's X plates
in ohm (defaults to 280)
- ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
the configured time (in milli seconds), the driver
will reset it. This is disabled by default.
- properties defined in touchscreen.txt
Example:
&i2c3 {
tsc2004@48 {
compatible = "ti,tsc2004";
reg = <0x48>;
vio-supply = <&vio>;
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
touchscreen-fuzz-x = <4>;
touchscreen-fuzz-y = <7>;
touchscreen-fuzz-pressure = <2>;
touchscreen-size-x = <4096>;
touchscreen-size-y = <4096>;
touchscreen-max-pressure = <2048>;
ti,x-plate-ohms = <280>;
ti,esd-recovery-timeout-ms = <8000>;
};
}
&mcspi1 {
tsc2005@0 {
compatible = "ti,tsc2005";
spi-max-frequency = <6000000>;
reg = <0>;
vio-supply = <&vio>;
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
touchscreen-fuzz-x = <4>;
touchscreen-fuzz-y = <7>;
touchscreen-fuzz-pressure = <2>;
touchscreen-size-x = <4096>;
touchscreen-size-y = <4096>;
touchscreen-max-pressure = <2048>;
ti,x-plate-ohms = <280>;
ti,esd-recovery-timeout-ms = <8000>;
};
}

View File

@ -1,49 +0,0 @@
Qualcomm PON Device
The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
and resin along with the Android reboot-mode.
This DT node has pwrkey and resin as sub nodes.
Required Properties:
-compatible: Must be one of:
"qcom,pm8916-pon"
"qcom,pms405-pon"
"qcom,pm8998-pon"
-reg: Specifies the physical address of the pon register
Optional subnode:
-pwrkey: Specifies the subnode pwrkey and should follow the
qcom,pm8941-pwrkey.txt description.
-resin: Specifies the subnode resin and should follow the
qcom,pm8xxx-pwrkey.txt description.
The rest of the properties should follow the generic reboot-mode description
found in reboot-mode.txt
Example:
pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
mode-bootloader = <0x2>;
mode-recovery = <0x1>;
pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};

View File

@ -0,0 +1,80 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm PON Device
maintainers:
- Vinod Koul <vkoul@kernel.org>
description: |
The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
and resin along with the Android reboot-mode.
This DT node has pwrkey and resin as sub nodes.
allOf:
- $ref: reboot-mode.yaml#
properties:
compatible:
enum:
- qcom,pm8916-pon
- qcom,pms405-pon
- qcom,pm8998-pon
reg:
maxItems: 1
pwrkey:
type: object
$ref: "../../input/qcom,pm8941-pwrkey.yaml#"
resin:
type: object
$ref: "../../input/qcom,pm8941-pwrkey.yaml#"
required:
- compatible
- reg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/spmi/spmi.h>
spmi_bus: spmi@c440000 {
reg = <0x0c440000 0x1100>;
#address-cells = <2>;
#size-cells = <0>;
pmk8350: pmic@0 {
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmk8350_pon: pon_hlos@1300 {
reg = <0x1300>;
compatible = "qcom,pm8998-pon";
pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};
};
};
...

View File

@ -36,7 +36,7 @@ patternProperties:
"^mode-.*$":
$ref: /schemas/types.yaml#/definitions/uint32
additionalProperties: false
additionalProperties: true
examples:
- |

View File

@ -28,10 +28,6 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
static bool use_ktime = true;
module_param(use_ktime, bool, 0400);
MODULE_PARM_DESC(use_ktime, "Use ktime for measuring I/O speed");
/*
* Option parsing.
*/
@ -110,7 +106,6 @@ struct analog_port {
char cooked;
int bads;
int reads;
int speed;
int loop;
int fuzz;
int axes[4];
@ -119,66 +114,6 @@ struct analog_port {
int axtime;
};
/*
* Time macros.
*/
#ifdef __i386__
#include <linux/i8253.h>
#define GET_TIME(x) do { if (boot_cpu_has(X86_FEATURE_TSC)) x = (unsigned int)rdtsc(); else x = get_time_pit(); } while (0)
#define DELTA(x,y) (boot_cpu_has(X86_FEATURE_TSC) ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? PIT_TICK_RATE / HZ : 0)))
#define TIME_NAME (boot_cpu_has(X86_FEATURE_TSC)?"TSC":"PIT")
static unsigned int get_time_pit(void)
{
unsigned long flags;
unsigned int count;
raw_spin_lock_irqsave(&i8253_lock, flags);
outb_p(0x00, 0x43);
count = inb_p(0x40);
count |= inb_p(0x40) << 8;
raw_spin_unlock_irqrestore(&i8253_lock, flags);
return count;
}
#elif defined(__x86_64__)
#define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_PPC) || defined(CONFIG_RISCV)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "get_cycles"
#else
#define FAKE_TIME
static unsigned long analog_faketime = 0;
#define GET_TIME(x) do { x = analog_faketime++; } while(0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "Unreliable"
#warning Precise timer not defined for this architecture.
#endif
static inline u64 get_time(void)
{
if (use_ktime) {
return ktime_get_ns();
} else {
unsigned int x;
GET_TIME(x);
return x;
}
}
static inline unsigned int delta(u64 x, u64 y)
{
if (use_ktime)
return y - x;
else
return DELTA((unsigned int)x, (unsigned int)y);
}
/*
* analog_decode() decodes analog joystick data and reports input events.
*/
@ -234,18 +169,18 @@ static void analog_decode(struct analog *analog, int *axes, int *initial, int bu
static int analog_cooked_read(struct analog_port *port)
{
struct gameport *gameport = port->gameport;
u64 time[4], start, loop, now;
ktime_t time[4], start, loop, now;
unsigned int loopout, timeout;
unsigned char data[4], this, last;
unsigned long flags;
int i, j;
loopout = (ANALOG_LOOP_TIME * port->loop) / 1000;
timeout = ANALOG_MAX_TIME * port->speed;
timeout = ANALOG_MAX_TIME * NSEC_PER_MSEC;
local_irq_save(flags);
gameport_trigger(gameport);
now = get_time();
now = ktime_get();
local_irq_restore(flags);
start = now;
@ -258,16 +193,16 @@ static int analog_cooked_read(struct analog_port *port)
local_irq_disable();
this = gameport_read(gameport) & port->mask;
now = get_time();
now = ktime_get();
local_irq_restore(flags);
if ((last ^ this) && (delta(loop, now) < loopout)) {
if ((last ^ this) && (ktime_sub(now, loop) < loopout)) {
data[i] = last ^ this;
time[i] = now;
i++;
}
} while (this && (i < 4) && (delta(start, now) < timeout));
} while (this && (i < 4) && (ktime_sub(now, start) < timeout));
this <<= 4;
@ -275,7 +210,7 @@ static int analog_cooked_read(struct analog_port *port)
this |= data[i];
for (j = 0; j < 4; j++)
if (data[i] & (1 << j))
port->axes[j] = (delta(start, time[i]) << ANALOG_FUZZ_BITS) / port->loop;
port->axes[j] = ((u32)ktime_sub(time[i], start) << ANALOG_FUZZ_BITS) / port->loop;
}
return -(this != port->mask);
@ -375,38 +310,22 @@ static void analog_calibrate_timer(struct analog_port *port)
{
struct gameport *gameport = port->gameport;
unsigned int i, t, tx;
u64 t1, t2, t3;
ktime_t t1, t2, t3;
unsigned long flags;
if (use_ktime) {
port->speed = 1000000;
} else {
local_irq_save(flags);
t1 = get_time();
#ifdef FAKE_TIME
analog_faketime += 830;
#endif
mdelay(1);
t2 = get_time();
t3 = get_time();
local_irq_restore(flags);
port->speed = delta(t1, t2) - delta(t2, t3);
}
tx = ~0;
for (i = 0; i < 50; i++) {
local_irq_save(flags);
t1 = get_time();
t1 = ktime_get();
for (t = 0; t < 50; t++) {
gameport_read(gameport);
t2 = get_time();
t2 = ktime_get();
}
t3 = get_time();
t3 = ktime_get();
local_irq_restore(flags);
udelay(i);
t = delta(t1, t2) - delta(t2, t3);
t = ktime_sub(t2, t1) - ktime_sub(t3, t2);
if (t < tx) tx = t;
}
@ -611,7 +530,7 @@ static int analog_init_port(struct gameport *gameport, struct gameport_driver *d
t = gameport_read(gameport);
msleep(ANALOG_MAX_TIME);
port->mask = (gameport_read(gameport) ^ t) & t & 0xf;
port->fuzz = (port->speed * ANALOG_FUZZ_MAGIC) / port->loop / 1000 + ANALOG_FUZZ_BITS;
port->fuzz = (NSEC_PER_MSEC * ANALOG_FUZZ_MAGIC) / port->loop / 1000 + ANALOG_FUZZ_BITS;
for (i = 0; i < ANALOG_INIT_RETRIES; i++) {
if (!analog_cooked_read(port))

View File

@ -210,7 +210,7 @@ config KEYBOARD_LKKBD
select SERIO
help
Say Y here if you want to use a LK201 or LK401 style serial
keyboard. This keyboard is also useable on PCs if you attach
keyboard. This keyboard is also usable on PCs if you attach
it with the inputattach program. The connector pinout is
described within lkkbd.c.

View File

@ -193,7 +193,7 @@ static const struct of_device_id adc_keys_of_match[] = {
MODULE_DEVICE_TABLE(of, adc_keys_of_match);
#endif
static struct platform_driver __refdata adc_keys_driver = {
static struct platform_driver adc_keys_driver = {
.driver = {
.name = "adc_keys",
.of_match_table = of_match_ptr(adc_keys_of_match),

View File

@ -17,7 +17,7 @@
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/gpio/driver.h>
#include <linux/slab.h>
#include <linux/platform_data/adp5588.h>

View File

@ -18,7 +18,7 @@
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/gpio/driver.h>
#include <linux/slab.h>
#include <linux/input/adp5589.h>

View File

@ -157,7 +157,7 @@ static int ep93xx_keypad_open(struct input_dev *pdev)
if (!keypad->enabled) {
ep93xx_keypad_config(keypad);
clk_enable(keypad->clk);
clk_prepare_enable(keypad->clk);
keypad->enabled = true;
}
@ -169,7 +169,7 @@ static void ep93xx_keypad_close(struct input_dev *pdev)
struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
if (keypad->enabled) {
clk_disable(keypad->clk);
clk_disable_unprepare(keypad->clk);
keypad->enabled = false;
}
}

View File

@ -309,18 +309,6 @@ config INPUT_GPIO_VIBRA
To compile this driver as a module, choose M here: the module will be
called gpio-vibra.
config INPUT_IXP4XX_BEEPER
tristate "IXP4XX Beeper support"
depends on ARCH_IXP4XX
help
If you say yes here, you can connect a beeper to the
ixp4xx gpio pins. This is used by the LinkSys NSLU2.
If unsure, say Y.
To compile this driver as a module, choose M here: the
module will be called ixp4xx-beeper.
config INPUT_COBALT_BTNS
tristate "Cobalt button interface"
depends on MIPS_COBALT
@ -811,16 +799,6 @@ config INPUT_XEN_KBDDEV_FRONTEND
To compile this driver as a module, choose M here: the
module will be called xen-kbdfront.
config INPUT_SIRFSOC_ONKEY
tristate "CSR SiRFSoC power on/off/suspend key support"
depends on ARCH_SIRF && OF
default y
help
Say Y here if you want to support for the SiRFSoC power on/off/suspend key
in Linux, after you press the onkey, system will suspend.
If unsure, say N.
config INPUT_IDEAPAD_SLIDEBAR
tristate "IdeaPad Laptop Slidebar"
depends on INPUT

View File

@ -44,7 +44,6 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o
obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
@ -74,7 +73,6 @@ obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o

View File

@ -1,183 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Generic IXP4xx beeper driver
*
* Copyright (C) 2005 Tower Technologies
*
* based on nslu2-io.c
* Copyright (C) 2004 Karen Spearel
*
* Author: Alessandro Zummo <a.zummo@towertech.it>
* Maintainers: http://www.nslu2-linux.org/
*/
#include <linux/module.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
MODULE_DESCRIPTION("ixp4xx beeper driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ixp4xx-beeper");
static DEFINE_SPINLOCK(beep_lock);
static int ixp4xx_timer2_irq;
static void ixp4xx_spkr_control(unsigned int pin, unsigned int count)
{
unsigned long flags;
spin_lock_irqsave(&beep_lock, flags);
if (count) {
gpio_direction_output(pin, 0);
*IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
} else {
gpio_direction_output(pin, 1);
gpio_direction_input(pin);
*IXP4XX_OSRT2 = 0;
}
spin_unlock_irqrestore(&beep_lock, flags);
}
static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
unsigned int pin = (unsigned int) input_get_drvdata(dev);
unsigned int count = 0;
if (type != EV_SND)
return -1;
switch (code) {
case SND_BELL:
if (value)
value = 1000;
case SND_TONE:
break;
default:
return -1;
}
if (value > 20 && value < 32767)
count = (ixp4xx_timer_freq / (value * 4)) - 1;
ixp4xx_spkr_control(pin, count);
return 0;
}
static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id)
{
unsigned int pin = (unsigned int) dev_id;
/* clear interrupt */
*IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
/* flip the beeper output */
gpio_set_value(pin, !gpio_get_value(pin));
return IRQ_HANDLED;
}
static int ixp4xx_spkr_probe(struct platform_device *dev)
{
struct input_dev *input_dev;
int irq;
int err;
input_dev = input_allocate_device();
if (!input_dev)
return -ENOMEM;
input_set_drvdata(input_dev, (void *) dev->id);
input_dev->name = "ixp4xx beeper";
input_dev->phys = "ixp4xx/gpio";
input_dev->id.bustype = BUS_HOST;
input_dev->id.vendor = 0x001f;
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0100;
input_dev->dev.parent = &dev->dev;
input_dev->evbit[0] = BIT_MASK(EV_SND);
input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
input_dev->event = ixp4xx_spkr_event;
irq = platform_get_irq(dev, 0);
if (irq < 0) {
err = irq;
goto err_free_device;
}
err = gpio_request(dev->id, "ixp4-beeper");
if (err)
goto err_free_device;
err = request_irq(irq, &ixp4xx_spkr_interrupt,
IRQF_NO_SUSPEND, "ixp4xx-beeper",
(void *) dev->id);
if (err)
goto err_free_gpio;
ixp4xx_timer2_irq = irq;
err = input_register_device(input_dev);
if (err)
goto err_free_irq;
platform_set_drvdata(dev, input_dev);
return 0;
err_free_irq:
free_irq(irq, (void *)dev->id);
err_free_gpio:
gpio_free(dev->id);
err_free_device:
input_free_device(input_dev);
return err;
}
static int ixp4xx_spkr_remove(struct platform_device *dev)
{
struct input_dev *input_dev = platform_get_drvdata(dev);
unsigned int pin = (unsigned int) input_get_drvdata(input_dev);
input_unregister_device(input_dev);
/* turn the speaker off */
disable_irq(ixp4xx_timer2_irq);
ixp4xx_spkr_control(pin, 0);
free_irq(ixp4xx_timer2_irq, (void *)dev->id);
gpio_free(dev->id);
return 0;
}
static void ixp4xx_spkr_shutdown(struct platform_device *dev)
{
struct input_dev *input_dev = platform_get_drvdata(dev);
unsigned int pin = (unsigned int) input_get_drvdata(input_dev);
/* turn off the speaker */
disable_irq(ixp4xx_timer2_irq);
ixp4xx_spkr_control(pin, 0);
}
static struct platform_driver ixp4xx_spkr_platform_driver = {
.driver = {
.name = "ixp4xx-beeper",
},
.probe = ixp4xx_spkr_probe,
.remove = ixp4xx_spkr_remove,
.shutdown = ixp4xx_spkr_shutdown,
};
module_platform_driver(ixp4xx_spkr_platform_driver);

View File

@ -284,7 +284,7 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
}
if (pwrkey->data->supports_ps_hold_poff_config) {
pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify;
error = register_reboot_notifier(&pwrkey->reboot_notifier);
if (error) {
dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",

View File

@ -1,207 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Power key driver for SiRF PrimaII
*
* Copyright (c) 2013 - 2014 Cambridge Silicon Radio Limited, a CSR plc group
* company.
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/rtc/sirfsoc_rtciobrg.h>
#include <linux/of.h>
#include <linux/workqueue.h>
struct sirfsoc_pwrc_drvdata {
u32 pwrc_base;
struct input_dev *input;
struct delayed_work work;
};
#define PWRC_ON_KEY_BIT (1 << 0)
#define PWRC_INT_STATUS 0xc
#define PWRC_INT_MASK 0x10
#define PWRC_PIN_STATUS 0x14
#define PWRC_KEY_DETECT_UP_TIME 20 /* ms*/
static int sirfsoc_pwrc_is_on_key_down(struct sirfsoc_pwrc_drvdata *pwrcdrv)
{
u32 state = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
PWRC_PIN_STATUS);
return !(state & PWRC_ON_KEY_BIT); /* ON_KEY is active low */
}
static void sirfsoc_pwrc_report_event(struct work_struct *work)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv =
container_of(work, struct sirfsoc_pwrc_drvdata, work.work);
if (sirfsoc_pwrc_is_on_key_down(pwrcdrv)) {
schedule_delayed_work(&pwrcdrv->work,
msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
} else {
input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 0);
input_sync(pwrcdrv->input);
}
}
static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_id;
u32 int_status;
int_status = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
PWRC_INT_STATUS);
sirfsoc_rtc_iobrg_writel(int_status & ~PWRC_ON_KEY_BIT,
pwrcdrv->pwrc_base + PWRC_INT_STATUS);
input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 1);
input_sync(pwrcdrv->input);
schedule_delayed_work(&pwrcdrv->work,
msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
return IRQ_HANDLED;
}
static void sirfsoc_pwrc_toggle_interrupts(struct sirfsoc_pwrc_drvdata *pwrcdrv,
bool enable)
{
u32 int_mask;
int_mask = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK);
if (enable)
int_mask |= PWRC_ON_KEY_BIT;
else
int_mask &= ~PWRC_ON_KEY_BIT;
sirfsoc_rtc_iobrg_writel(int_mask, pwrcdrv->pwrc_base + PWRC_INT_MASK);
}
static int sirfsoc_pwrc_open(struct input_dev *input)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
return 0;
}
static void sirfsoc_pwrc_close(struct input_dev *input)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
cancel_delayed_work_sync(&pwrcdrv->work);
}
static const struct of_device_id sirfsoc_pwrc_of_match[] = {
{ .compatible = "sirf,prima2-pwrc" },
{},
};
MODULE_DEVICE_TABLE(of, sirfsoc_pwrc_of_match);
static int sirfsoc_pwrc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct sirfsoc_pwrc_drvdata *pwrcdrv;
int irq;
int error;
pwrcdrv = devm_kzalloc(&pdev->dev, sizeof(struct sirfsoc_pwrc_drvdata),
GFP_KERNEL);
if (!pwrcdrv) {
dev_info(&pdev->dev, "Not enough memory for the device data\n");
return -ENOMEM;
}
/*
* We can't use of_iomap because pwrc is not mapped in memory,
* the so-called base address is only offset in rtciobrg
*/
error = of_property_read_u32(np, "reg", &pwrcdrv->pwrc_base);
if (error) {
dev_err(&pdev->dev,
"unable to find base address of pwrc node in dtb\n");
return error;
}
pwrcdrv->input = devm_input_allocate_device(&pdev->dev);
if (!pwrcdrv->input)
return -ENOMEM;
pwrcdrv->input->name = "sirfsoc pwrckey";
pwrcdrv->input->phys = "pwrc/input0";
pwrcdrv->input->evbit[0] = BIT_MASK(EV_KEY);
input_set_capability(pwrcdrv->input, EV_KEY, KEY_POWER);
INIT_DELAYED_WORK(&pwrcdrv->work, sirfsoc_pwrc_report_event);
pwrcdrv->input->open = sirfsoc_pwrc_open;
pwrcdrv->input->close = sirfsoc_pwrc_close;
input_set_drvdata(pwrcdrv->input, pwrcdrv);
/* Make sure the device is quiesced */
sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
irq = platform_get_irq(pdev, 0);
error = devm_request_irq(&pdev->dev, irq,
sirfsoc_pwrc_isr, 0,
"sirfsoc_pwrc_int", pwrcdrv);
if (error) {
dev_err(&pdev->dev, "unable to claim irq %d, error: %d\n",
irq, error);
return error;
}
error = input_register_device(pwrcdrv->input);
if (error) {
dev_err(&pdev->dev,
"unable to register input device, error: %d\n",
error);
return error;
}
dev_set_drvdata(&pdev->dev, pwrcdrv);
device_init_wakeup(&pdev->dev, 1);
return 0;
}
static int __maybe_unused sirfsoc_pwrc_resume(struct device *dev)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_get_drvdata(dev);
struct input_dev *input = pwrcdrv->input;
/*
* Do not mask pwrc interrupt as we want pwrc work as a wakeup source
* if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c
*/
mutex_lock(&input->mutex);
if (input_device_enabled(input))
sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
mutex_unlock(&input->mutex);
return 0;
}
static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume);
static struct platform_driver sirfsoc_pwrc_driver = {
.probe = sirfsoc_pwrc_probe,
.driver = {
.name = "sirfsoc-pwrc",
.pm = &sirfsoc_pwrc_pm_ops,
.of_match_table = sirfsoc_pwrc_of_match,
}
};
module_platform_driver(sirfsoc_pwrc_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Binghua Duan <Binghua.Duan@csr.com>, Xianglong Du <Xianglong.Du@csr.com>");
MODULE_DESCRIPTION("CSR Prima2 PWRC Driver");
MODULE_ALIAS("platform:sirfsoc-pwrc");

View File

@ -55,8 +55,9 @@
#define ETP_FW_PAGE_SIZE_512 512
#define ETP_FW_SIGNATURE_SIZE 6
#define ETP_PRODUCT_ID_DELBIN 0x00C2
#define ETP_PRODUCT_ID_WHITEBOX 0x00B8
#define ETP_PRODUCT_ID_VOXEL 0x00BF
#define ETP_PRODUCT_ID_DELBIN 0x00C2
#define ETP_PRODUCT_ID_MAGPIE 0x0120
#define ETP_PRODUCT_ID_BOBBA 0x0121

View File

@ -105,6 +105,7 @@ static u32 elan_i2c_lookup_quirks(u16 ic_type, u16 product_id)
u32 quirks;
} elan_i2c_quirks[] = {
{ 0x0D, ETP_PRODUCT_ID_DELBIN, ETP_QUIRK_QUICK_WAKEUP },
{ 0x0D, ETP_PRODUCT_ID_WHITEBOX, ETP_QUIRK_QUICK_WAKEUP },
{ 0x10, ETP_PRODUCT_ID_VOXEL, ETP_QUIRK_QUICK_WAKEUP },
{ 0x14, ETP_PRODUCT_ID_MAGPIE, ETP_QUIRK_QUICK_WAKEUP },
{ 0x14, ETP_PRODUCT_ID_BOBBA, ETP_QUIRK_QUICK_WAKEUP },

View File

@ -220,16 +220,4 @@ static struct parport_driver parkbd_parport_driver = {
.detach = parkbd_detach,
.devmodel = true,
};
static int __init parkbd_init(void)
{
return parport_register_driver(&parkbd_parport_driver);
}
static void __exit parkbd_exit(void)
{
parport_unregister_driver(&parkbd_parport_driver);
}
module_init(parkbd_init);
module_exit(parkbd_exit);
module_parport_driver(parkbd_parport_driver);

View File

@ -932,7 +932,7 @@ config TOUCHSCREEN_USB_COMPOSITE
- JASTEC USB Touch Controller/DigiTech DTR-02U
- Zytronic controllers
- Elo TouchSystems 2700 IntelliTouch
- EasyTouch USB Touch Controller from Data Modul
- EasyTouch USB Touch Controller from Data Module
- e2i (Mimo monitors)
Have a look at <http://linux.chapter7.ch/touchkit/> for

View File

@ -899,6 +899,7 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
* the identification registers.
*/
switch (rdbuf[0]) {
case 0x11: /* EDT EP0110M09 */
case 0x35: /* EDT EP0350M09 */
case 0x43: /* EDT EP0430M09 */
case 0x50: /* EDT EP0500M09 */

View File

@ -54,6 +54,7 @@
enum mms_type {
TYPE_MMS114 = 114,
TYPE_MMS134S = 134,
TYPE_MMS136 = 136,
TYPE_MMS152 = 152,
TYPE_MMS345L = 345,
@ -212,7 +213,7 @@ static irqreturn_t mms114_interrupt(int irq, void *dev_id)
goto out;
/* MMS136 has slightly different event size */
if (data->type == TYPE_MMS136)
if (data->type == TYPE_MMS134S || data->type == TYPE_MMS136)
touch_size = packet_size / MMS136_EVENT_SIZE;
else
touch_size = packet_size / MMS114_EVENT_SIZE;
@ -281,6 +282,7 @@ static int mms114_get_version(struct mms114_data *data)
break;
case TYPE_MMS114:
case TYPE_MMS134S:
case TYPE_MMS136:
error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
if (error)
@ -304,8 +306,9 @@ static int mms114_setup_regs(struct mms114_data *data)
if (error < 0)
return error;
/* Only MMS114 and MMS136 have configuration and power on registers */
if (data->type != TYPE_MMS114 && data->type != TYPE_MMS136)
/* MMS114, MMS134S and MMS136 have configuration and power on registers */
if (data->type != TYPE_MMS114 && data->type != TYPE_MMS134S &&
data->type != TYPE_MMS136)
return 0;
error = mms114_set_active(data, true);
@ -487,7 +490,8 @@ static int mms114_probe(struct i2c_client *client,
0, data->props.max_y, 0, 0);
}
if (data->type == TYPE_MMS114 || data->type == TYPE_MMS136) {
if (data->type == TYPE_MMS114 || data->type == TYPE_MMS134S ||
data->type == TYPE_MMS136) {
/*
* The firmware handles movement and pressure fuzz, so
* don't duplicate that in software.
@ -611,6 +615,9 @@ static const struct of_device_id mms114_dt_match[] = {
{
.compatible = "melfas,mms114",
.data = (void *)TYPE_MMS114,
}, {
.compatible = "melfas,mms134s",
.data = (void *)TYPE_MMS134S,
}, {
.compatible = "melfas,mms136",
.data = (void *)TYPE_MMS136,