mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 14:11:52 +00:00
regulator: act8945a-regulator: Implement PM functionalities
The regulator supports a dedicated suspend mode. Implement the appropriate ->set_suspend_xx() hooks, add support for ->set_mode(), and provide basic PM ops functionalities to setup the regulator in a suspend state when the system is entering suspend. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> [claudiu.beznea@microchip.com: remove shutdown function, use dev_pm_ops, fix checkpatch warning, adapt commit message, add LDO modes support, move modes constants to active-semi,8945a-regulator.h, remove rdevs from struct act8945a_pmic, add op_mode to act8945a_pmic] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Boris Brezillon
Mark Brown
parent
90bc8ac220
commit
7482d6ecc6
@ -18,6 +18,7 @@
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
|
||||
|
||||
/**
|
||||
* ACT8945A Global Register Map.
|
||||
@ -28,20 +29,27 @@
|
||||
#define ACT8945A_DCDC1_VSET1 0x20
|
||||
#define ACT8945A_DCDC1_VSET2 0x21
|
||||
#define ACT8945A_DCDC1_CTRL 0x22
|
||||
#define ACT8945A_DCDC1_SUS 0x24
|
||||
#define ACT8945A_DCDC2_VSET1 0x30
|
||||
#define ACT8945A_DCDC2_VSET2 0x31
|
||||
#define ACT8945A_DCDC2_CTRL 0x32
|
||||
#define ACT8945A_DCDC2_SUS 0x34
|
||||
#define ACT8945A_DCDC3_VSET1 0x40
|
||||
#define ACT8945A_DCDC3_VSET2 0x41
|
||||
#define ACT8945A_DCDC3_CTRL 0x42
|
||||
#define ACT8945A_DCDC3_SUS 0x44
|
||||
#define ACT8945A_LDO1_VSET 0x50
|
||||
#define ACT8945A_LDO1_CTRL 0x51
|
||||
#define ACT8945A_LDO1_SUS 0x52
|
||||
#define ACT8945A_LDO2_VSET 0x54
|
||||
#define ACT8945A_LDO2_CTRL 0x55
|
||||
#define ACT8945A_LDO2_SUS 0x56
|
||||
#define ACT8945A_LDO3_VSET 0x60
|
||||
#define ACT8945A_LDO3_CTRL 0x61
|
||||
#define ACT8945A_LDO3_SUS 0x62
|
||||
#define ACT8945A_LDO4_VSET 0x64
|
||||
#define ACT8945A_LDO4_CTRL 0x65
|
||||
#define ACT8945A_LDO4_SUS 0x66
|
||||
|
||||
/**
|
||||
* Field Definitions.
|
||||
@ -62,7 +70,12 @@ enum {
|
||||
ACT8945A_ID_LDO2,
|
||||
ACT8945A_ID_LDO3,
|
||||
ACT8945A_ID_LDO4,
|
||||
ACT8945A_REG_NUM,
|
||||
ACT8945A_ID_MAX,
|
||||
};
|
||||
|
||||
struct act8945a_pmic {
|
||||
struct regmap *regmap;
|
||||
u32 op_mode[ACT8945A_ID_MAX];
|
||||
};
|
||||
|
||||
static const struct regulator_linear_range act8945a_voltage_ranges[] = {
|
||||
@ -71,6 +84,143 @@ static const struct regulator_linear_range act8945a_voltage_ranges[] = {
|
||||
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
|
||||
};
|
||||
|
||||
static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable)
|
||||
{
|
||||
struct regmap *regmap = rdev->regmap;
|
||||
int id = rdev->desc->id, reg, val;
|
||||
|
||||
switch (id) {
|
||||
case ACT8945A_ID_DCDC1:
|
||||
reg = ACT8945A_DCDC1_SUS;
|
||||
val = 0xa8;
|
||||
break;
|
||||
case ACT8945A_ID_DCDC2:
|
||||
reg = ACT8945A_DCDC2_SUS;
|
||||
val = 0xa8;
|
||||
break;
|
||||
case ACT8945A_ID_DCDC3:
|
||||
reg = ACT8945A_DCDC3_SUS;
|
||||
val = 0xa8;
|
||||
break;
|
||||
case ACT8945A_ID_LDO1:
|
||||
reg = ACT8945A_LDO1_SUS;
|
||||
val = 0xe8;
|
||||
break;
|
||||
case ACT8945A_ID_LDO2:
|
||||
reg = ACT8945A_LDO2_SUS;
|
||||
val = 0xe8;
|
||||
break;
|
||||
case ACT8945A_ID_LDO3:
|
||||
reg = ACT8945A_LDO3_SUS;
|
||||
val = 0xe8;
|
||||
break;
|
||||
case ACT8945A_ID_LDO4:
|
||||
reg = ACT8945A_LDO4_SUS;
|
||||
val = 0xe8;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (enable)
|
||||
val |= BIT(4);
|
||||
|
||||
/*
|
||||
* Ask the PMIC to enable/disable this output when entering hibernate
|
||||
* mode.
|
||||
*/
|
||||
return regmap_write(regmap, reg, val);
|
||||
}
|
||||
|
||||
static int act8945a_set_suspend_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
return act8945a_set_suspend_state(rdev, true);
|
||||
}
|
||||
|
||||
static int act8945a_set_suspend_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
return act8945a_set_suspend_state(rdev, false);
|
||||
}
|
||||
|
||||
static unsigned int act8945a_of_map_mode(unsigned int mode)
|
||||
{
|
||||
switch (mode) {
|
||||
case ACT8945A_REGULATOR_MODE_FIXED:
|
||||
case ACT8945A_REGULATOR_MODE_NORMAL:
|
||||
return REGULATOR_MODE_NORMAL;
|
||||
case ACT8945A_REGULATOR_MODE_LOWPOWER:
|
||||
return REGULATOR_MODE_STANDBY;
|
||||
default:
|
||||
return REGULATOR_MODE_INVALID;
|
||||
}
|
||||
}
|
||||
|
||||
static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
|
||||
struct regmap *regmap = rdev->regmap;
|
||||
int id = rdev->desc->id;
|
||||
int reg, ret, val = 0;
|
||||
|
||||
switch (id) {
|
||||
case ACT8945A_ID_DCDC1:
|
||||
reg = ACT8945A_DCDC1_CTRL;
|
||||
break;
|
||||
case ACT8945A_ID_DCDC2:
|
||||
reg = ACT8945A_DCDC2_CTRL;
|
||||
break;
|
||||
case ACT8945A_ID_DCDC3:
|
||||
reg = ACT8945A_DCDC3_CTRL;
|
||||
break;
|
||||
case ACT8945A_ID_LDO1:
|
||||
reg = ACT8945A_LDO1_SUS;
|
||||
break;
|
||||
case ACT8945A_ID_LDO2:
|
||||
reg = ACT8945A_LDO2_SUS;
|
||||
break;
|
||||
case ACT8945A_ID_LDO3:
|
||||
reg = ACT8945A_LDO3_SUS;
|
||||
break;
|
||||
case ACT8945A_ID_LDO4:
|
||||
reg = ACT8945A_LDO4_SUS;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_STANDBY:
|
||||
if (rdev->desc->id > ACT8945A_ID_DCDC3)
|
||||
val = BIT(5);
|
||||
break;
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
if (rdev->desc->id <= ACT8945A_ID_DCDC3)
|
||||
val = BIT(5);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(regmap, reg, BIT(5), val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
act8945a->op_mode[id] = mode;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned int act8945a_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
|
||||
int id = rdev->desc->id;
|
||||
|
||||
if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX)
|
||||
return -EINVAL;
|
||||
|
||||
return act8945a->op_mode[id];
|
||||
}
|
||||
|
||||
static const struct regulator_ops act8945a_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.map_voltage = regulator_map_voltage_linear_range,
|
||||
@ -78,7 +228,11 @@ static const struct regulator_ops act8945a_ops = {
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.set_mode = act8945a_set_mode,
|
||||
.get_mode = act8945a_get_mode,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.set_suspend_enable = act8945a_set_suspend_enable,
|
||||
.set_suspend_disable = act8945a_set_suspend_disable,
|
||||
};
|
||||
|
||||
#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \
|
||||
@ -86,6 +240,7 @@ static const struct regulator_ops act8945a_ops = {
|
||||
.name = _name, \
|
||||
.supply_name = _supply, \
|
||||
.of_match = of_match_ptr("REG_"#_id), \
|
||||
.of_map_mode = act8945a_of_map_mode, \
|
||||
.regulators_node = of_match_ptr("regulators"), \
|
||||
.id = _family##_ID_##_id, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
@ -124,13 +279,17 @@ static int act8945a_pmic_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct regulator_config config = { };
|
||||
const struct regulator_desc *regulators;
|
||||
struct act8945a_pmic *act8945a;
|
||||
struct regulator_dev *rdev;
|
||||
struct regmap *regmap;
|
||||
int i, num_regulators;
|
||||
bool voltage_select;
|
||||
|
||||
regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
||||
if (!regmap) {
|
||||
act8945a = devm_kzalloc(&pdev->dev, sizeof(*act8945a), GFP_KERNEL);
|
||||
if (!act8945a)
|
||||
return -ENOMEM;
|
||||
|
||||
act8945a->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
||||
if (!act8945a->regmap) {
|
||||
dev_err(&pdev->dev,
|
||||
"could not retrieve regmap from parent device\n");
|
||||
return -EINVAL;
|
||||
@ -149,6 +308,7 @@ static int act8945a_pmic_probe(struct platform_device *pdev)
|
||||
|
||||
config.dev = &pdev->dev;
|
||||
config.dev->of_node = pdev->dev.parent->of_node;
|
||||
config.driver_data = act8945a;
|
||||
for (i = 0; i < num_regulators; i++) {
|
||||
rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config);
|
||||
if (IS_ERR(rdev)) {
|
||||
@ -159,13 +319,29 @@ static int act8945a_pmic_probe(struct platform_device *pdev)
|
||||
}
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, act8945a);
|
||||
|
||||
/* Unlock expert registers. */
|
||||
return regmap_write(regmap, ACT8945A_SYS_UNLK_REGS, 0xef);
|
||||
return regmap_write(act8945a->regmap, ACT8945A_SYS_UNLK_REGS, 0xef);
|
||||
}
|
||||
|
||||
static int act8945a_suspend(struct device *pdev)
|
||||
{
|
||||
struct act8945a_pmic *act8945a = dev_get_drvdata(pdev);
|
||||
|
||||
/*
|
||||
* Ask the PMIC to enter the suspend mode on the next PWRHLD
|
||||
* transition.
|
||||
*/
|
||||
return regmap_write(act8945a->regmap, ACT8945A_SYS_CTRL, 0x42);
|
||||
}
|
||||
|
||||
SIMPLE_DEV_PM_OPS(act8945a_pm, act8945a_suspend, NULL);
|
||||
|
||||
static struct platform_driver act8945a_pmic_driver = {
|
||||
.driver = {
|
||||
.name = "act8945a-regulator",
|
||||
.pm = &act8945a_pm,
|
||||
},
|
||||
.probe = act8945a_pmic_probe,
|
||||
};
|
||||
|
||||
30
include/dt-bindings/regulator/active-semi,8945a-regulator.h
Normal file
30
include/dt-bindings/regulator/active-semi,8945a-regulator.h
Normal file
@ -0,0 +1,30 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (c) 2018 Microchip Technology, Inc. All rights reserved.
|
||||
*
|
||||
* Device Tree binding constants for the ACT8945A PMIC regulators
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_REGULATOR_ACT8945A_H
|
||||
#define _DT_BINDINGS_REGULATOR_ACT8945A_H
|
||||
|
||||
/*
|
||||
* These constants should be used to specify regulator modes in device tree for
|
||||
* ACT8945A regulators as follows:
|
||||
* ACT8945A_REGULATOR_MODE_FIXED: It is specific to DCDC regulators and it
|
||||
* specifies the usage of fixed-frequency
|
||||
* PWM.
|
||||
*
|
||||
* ACT8945A_REGULATOR_MODE_NORMAL: It is specific to LDO regulators and it
|
||||
* specifies the usage of normal mode.
|
||||
*
|
||||
* ACT8945A_REGULATOR_MODE_LOWPOWER: For DCDC and LDO regulators; it specify
|
||||
* the usage of proprietary power-saving
|
||||
* mode.
|
||||
*/
|
||||
|
||||
#define ACT8945A_REGULATOR_MODE_FIXED 1
|
||||
#define ACT8945A_REGULATOR_MODE_NORMAL 2
|
||||
#define ACT8945A_REGULATOR_MODE_LOWPOWER 3
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user