drm/i915: Add HSW CRT output readout support

Call intel_ddi_get_config() to get the pipe_bpp settings from
DDI.

The sync polarity settings from DDI are irrelevant for CRT
output, so override them with data from the ADPA register.

Note: This is already merged in drm-intel-next-queued as

commit 6801c18c0a
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Tue Sep 24 14:24:05 2013 +0300

    drm/i915: Add HSW CRT output readout support

but is required for the following edp bpp bugfix.

v2: Extract intel_crt_get_flags()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691
Tested-by: Qingshuai Tian <qingshuai.tian@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Ville Syrjälä 2013-09-24 14:24:05 +03:00 committed by Daniel Vetter
parent 4f56d12ebb
commit 7195a50b5c
3 changed files with 30 additions and 6 deletions

View File

@ -83,8 +83,7 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
return true;
}
static void intel_crt_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crt *crt = intel_encoder_to_crt(encoder);
@ -102,7 +101,27 @@ static void intel_crt_get_config(struct intel_encoder *encoder,
else
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->adjusted_mode.flags |= flags;
return flags;
}
static void intel_crt_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
struct drm_device *dev = encoder->base.dev;
pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
}
static void hsw_crt_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
intel_ddi_get_config(encoder, pipe_config);
pipe_config->adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
DRM_MODE_FLAG_NHSYNC |
DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_NVSYNC);
pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
}
/* Note: The caller is required to filter out dpms modes not supported by the
@ -799,7 +818,10 @@ void intel_crt_init(struct drm_device *dev)
crt->base.mode_set = intel_crt_mode_set;
crt->base.disable = intel_disable_crt;
crt->base.enable = intel_enable_crt;
crt->base.get_config = intel_crt_get_config;
if (IS_HASWELL(dev))
crt->base.get_config = hsw_crt_get_config;
else
crt->base.get_config = intel_crt_get_config;
if (I915_HAS_HOTPLUG(dev))
crt->base.hpd_pin = HPD_CRT;
if (HAS_DDI(dev))

View File

@ -1249,8 +1249,8 @@ static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder)
intel_dp_check_link_status(intel_dp);
}
static void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);

View File

@ -765,6 +765,8 @@ extern void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder);
extern bool
intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
extern void intel_ddi_fdi_disable(struct drm_crtc *crtc);
extern void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config);
extern void intel_display_handle_reset(struct drm_device *dev);
extern bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,