mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 06:31:49 +00:00
Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: needs new maintainer hwmon: (lm85) Simplify device initialization function hwmon: (lm85) Misc cleanups hwmon: (lm85) Don't write back cached values hwmon: (lm85) Drop dead code hwmon: (lm85) Coding-style cleanups hwmon: (lm75) add new-style driver binding hwmon: (lm75) cleanup/reorg hwmon: (adt7473) clarify an awkward bit of code hwmon: (adt7473) Remove unused defines hwmon: (dme1737) fix voltage scaling hwmon: (dme1737) probe all addresses hwmon: (dme1737) demacrofy for readability
This commit is contained in:
Linus Torvalds
commit
6760561324
@ -22,6 +22,10 @@ Module Parameters
|
||||
and PWM output control functions. Using this parameter
|
||||
shouldn't be required since the BIOS usually takes care
|
||||
of this.
|
||||
* probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e
|
||||
when probing for ISA devices. This is required for the
|
||||
following boards:
|
||||
- VIA EPIA SN18000
|
||||
|
||||
Note that there is no need to use this parameter if the driver loads without
|
||||
complaining. The driver will say so if it is necessary.
|
||||
|
||||
@ -96,11 +96,6 @@ initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
|
||||
confirmed this "bug". The ADT7463 is reported to work as described in the
|
||||
documentation. The current lm85 driver does not show the offset register.
|
||||
|
||||
The ADT7463 has a THERM asserted counter. This counter has a 22.76ms
|
||||
resolution and a range of 5.8 seconds. The driver implements a 32-bit
|
||||
accumulator of the counter value to extend the range to over a year. The
|
||||
counter will stay at it's max value until read.
|
||||
|
||||
See the vendor datasheets for more information. There is application note
|
||||
from National (AN-1260) with some additional information about the LM85.
|
||||
The Analog Devices datasheet is very detailed and describes a procedure for
|
||||
@ -206,13 +201,15 @@ Configuration choices:
|
||||
|
||||
The National LM85's have two vendor specific configuration
|
||||
features. Tach. mode and Spinup Control. For more details on these,
|
||||
see the LM85 datasheet or Application Note AN-1260.
|
||||
see the LM85 datasheet or Application Note AN-1260. These features
|
||||
are not currently supported by the lm85 driver.
|
||||
|
||||
The Analog Devices ADM1027 has several vendor specific enhancements.
|
||||
The number of pulses-per-rev of the fans can be set, Tach monitoring
|
||||
can be optimized for PWM operation, and an offset can be applied to
|
||||
the temperatures to compensate for systemic errors in the
|
||||
measurements.
|
||||
measurements. These features are not currently supported by the lm85
|
||||
driver.
|
||||
|
||||
In addition to the ADM1027 features, the ADT7463 also has Tmin control
|
||||
and THERM asserted counts. Automatic Tmin control acts to adjust the
|
||||
|
||||
@ -1878,13 +1878,9 @@ W: http://gigaset307x.sourceforge.net/
|
||||
S: Maintained
|
||||
|
||||
HARDWARE MONITORING
|
||||
P: Mark M. Hoffman
|
||||
M: mhoffman@lightlink.com
|
||||
L: lm-sensors@lm-sensors.org
|
||||
W: http://www.lm-sensors.org/
|
||||
T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing
|
||||
T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release
|
||||
S: Maintained
|
||||
S: Orphaned
|
||||
|
||||
HARDWARE RANDOM NUMBER GENERATOR CORE
|
||||
S: Orphaned
|
||||
|
||||
@ -394,13 +394,24 @@ config SENSORS_LM75
|
||||
tristate "National Semiconductor LM75 and compatibles"
|
||||
depends on I2C
|
||||
help
|
||||
If you say yes here you get support for National Semiconductor LM75
|
||||
sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
|
||||
9-bit precision mode), and TelCom (now Microchip) TCN75.
|
||||
If you say yes here you get support for one common type of
|
||||
temperature sensor chip, with models including:
|
||||
|
||||
The DS75 and DS1775 in 10- to 12-bit precision modes will require
|
||||
a force module parameter. The driver will not handle the extra
|
||||
precision anyhow.
|
||||
- Dallas Semiconductor DS75 and DS1775
|
||||
- Maxim MAX6625 and MAX6626
|
||||
- Microchip MCP980x
|
||||
- National Semiconductor LM75
|
||||
- NXP's LM75A
|
||||
- ST Microelectronics STDS75
|
||||
- TelCom (now Microchip) TCN75
|
||||
- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
|
||||
|
||||
This driver supports driver model based binding through board
|
||||
specific I2C device tables.
|
||||
|
||||
It also supports the "legacy" style of driver binding. To use
|
||||
that with some chips which don't replicate LM75 quirks exactly,
|
||||
you may need the "force" module parameter.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called lm75.
|
||||
|
||||
@ -39,32 +39,20 @@ I2C_CLIENT_INSMOD_1(adt7473);
|
||||
#define ADT7473_REG_BASE_ADDR 0x20
|
||||
|
||||
#define ADT7473_REG_VOLT_BASE_ADDR 0x21
|
||||
#define ADT7473_REG_VOLT_MAX_ADDR 0x22
|
||||
#define ADT7473_REG_VOLT_MIN_BASE_ADDR 0x46
|
||||
#define ADT7473_REG_VOLT_MIN_MAX_ADDR 0x49
|
||||
|
||||
#define ADT7473_REG_TEMP_BASE_ADDR 0x25
|
||||
#define ADT7473_REG_TEMP_MAX_ADDR 0x27
|
||||
#define ADT7473_REG_TEMP_LIMITS_BASE_ADDR 0x4E
|
||||
#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR 0x53
|
||||
#define ADT7473_REG_TEMP_TMIN_BASE_ADDR 0x67
|
||||
#define ADT7473_REG_TEMP_TMIN_MAX_ADDR 0x69
|
||||
#define ADT7473_REG_TEMP_TMAX_BASE_ADDR 0x6A
|
||||
#define ADT7473_REG_TEMP_TMAX_MAX_ADDR 0x6C
|
||||
|
||||
#define ADT7473_REG_FAN_BASE_ADDR 0x28
|
||||
#define ADT7473_REG_FAN_MAX_ADDR 0x2F
|
||||
#define ADT7473_REG_FAN_MIN_BASE_ADDR 0x54
|
||||
#define ADT7473_REG_FAN_MIN_MAX_ADDR 0x5B
|
||||
|
||||
#define ADT7473_REG_PWM_BASE_ADDR 0x30
|
||||
#define ADT7473_REG_PWM_MAX_ADDR 0x32
|
||||
#define ADT7473_REG_PWM_MIN_BASE_ADDR 0x64
|
||||
#define ADT7473_REG_PWM_MIN_MAX_ADDR 0x66
|
||||
#define ADT7473_REG_PWM_MAX_BASE_ADDR 0x38
|
||||
#define ADT7473_REG_PWM_MAX_MAX_ADDR 0x3A
|
||||
#define ADT7473_REG_PWM_BHVR_BASE_ADDR 0x5C
|
||||
#define ADT7473_REG_PWM_BHVR_MAX_ADDR 0x5E
|
||||
#define ADT7473_PWM_BHVR_MASK 0xE0
|
||||
#define ADT7473_PWM_BHVR_SHIFT 5
|
||||
|
||||
@ -102,7 +90,6 @@ I2C_CLIENT_INSMOD_1(adt7473);
|
||||
#define ADT7473_FAN4_ALARM 0x20
|
||||
#define ADT7473_R1T_SHORT 0x40
|
||||
#define ADT7473_R2T_SHORT 0x80
|
||||
#define ADT7473_REG_MAX_ADDR 0x80
|
||||
|
||||
#define ALARM2(x) ((x) << 8)
|
||||
|
||||
@ -583,10 +570,9 @@ static ssize_t set_max_duty_at_crit(struct device *dev,
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct adt7473_data *data = i2c_get_clientdata(client);
|
||||
int temp = simple_strtol(buf, NULL, 10);
|
||||
temp = temp && 0xFF;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
data->max_duty_at_overheat = temp;
|
||||
data->max_duty_at_overheat = !!temp;
|
||||
reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
|
||||
if (temp)
|
||||
reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT;
|
||||
|
||||
@ -48,6 +48,11 @@ static unsigned short force_id;
|
||||
module_param(force_id, ushort, 0);
|
||||
MODULE_PARM_DESC(force_id, "Override the detected device ID");
|
||||
|
||||
static int probe_all_addr;
|
||||
module_param(probe_all_addr, bool, 0);
|
||||
MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC "
|
||||
"addresses");
|
||||
|
||||
/* Addresses to scan */
|
||||
static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
|
||||
|
||||
@ -176,6 +181,7 @@ struct dme1737_data {
|
||||
int valid; /* !=0 if following fields are valid */
|
||||
unsigned long last_update; /* in jiffies */
|
||||
unsigned long last_vbat; /* in jiffies */
|
||||
enum chips type;
|
||||
|
||||
u8 vid;
|
||||
u8 pwm_rr_en;
|
||||
@ -210,20 +216,27 @@ struct dme1737_data {
|
||||
};
|
||||
|
||||
/* Nominal voltage values */
|
||||
static const int IN_NOMINAL[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300};
|
||||
static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300,
|
||||
3300};
|
||||
static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
|
||||
3300};
|
||||
#define IN_NOMINAL(ix, type) (((type) == dme1737) ? \
|
||||
IN_NOMINAL_DME1737[(ix)] : \
|
||||
IN_NOMINAL_SCH311x[(ix)])
|
||||
|
||||
/* Voltage input
|
||||
* Voltage inputs have 16 bits resolution, limit values have 8 bits
|
||||
* resolution. */
|
||||
static inline int IN_FROM_REG(int reg, int ix, int res)
|
||||
static inline int IN_FROM_REG(int reg, int ix, int res, int type)
|
||||
{
|
||||
return (reg * IN_NOMINAL[ix] + (3 << (res - 3))) / (3 << (res - 2));
|
||||
return (reg * IN_NOMINAL(ix, type) + (3 << (res - 3))) /
|
||||
(3 << (res - 2));
|
||||
}
|
||||
|
||||
static inline int IN_TO_REG(int val, int ix)
|
||||
static inline int IN_TO_REG(int val, int ix, int type)
|
||||
{
|
||||
return SENSORS_LIMIT((val * 192 + IN_NOMINAL[ix] / 2) /
|
||||
IN_NOMINAL[ix], 0, 255);
|
||||
return SENSORS_LIMIT((val * 192 + IN_NOMINAL(ix, type) / 2) /
|
||||
IN_NOMINAL(ix, type), 0, 255);
|
||||
}
|
||||
|
||||
/* Temperature input
|
||||
@ -722,13 +735,13 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr,
|
||||
|
||||
switch (fn) {
|
||||
case SYS_IN_INPUT:
|
||||
res = IN_FROM_REG(data->in[ix], ix, 16);
|
||||
res = IN_FROM_REG(data->in[ix], ix, 16, data->type);
|
||||
break;
|
||||
case SYS_IN_MIN:
|
||||
res = IN_FROM_REG(data->in_min[ix], ix, 8);
|
||||
res = IN_FROM_REG(data->in_min[ix], ix, 8, data->type);
|
||||
break;
|
||||
case SYS_IN_MAX:
|
||||
res = IN_FROM_REG(data->in_max[ix], ix, 8);
|
||||
res = IN_FROM_REG(data->in_max[ix], ix, 8, data->type);
|
||||
break;
|
||||
case SYS_IN_ALARM:
|
||||
res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01;
|
||||
@ -755,12 +768,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr,
|
||||
mutex_lock(&data->update_lock);
|
||||
switch (fn) {
|
||||
case SYS_IN_MIN:
|
||||
data->in_min[ix] = IN_TO_REG(val, ix);
|
||||
data->in_min[ix] = IN_TO_REG(val, ix, data->type);
|
||||
dme1737_write(client, DME1737_REG_IN_MIN(ix),
|
||||
data->in_min[ix]);
|
||||
break;
|
||||
case SYS_IN_MAX:
|
||||
data->in_max[ix] = IN_TO_REG(val, ix);
|
||||
data->in_max[ix] = IN_TO_REG(val, ix, data->type);
|
||||
dme1737_write(client, DME1737_REG_IN_MAX(ix),
|
||||
data->in_max[ix]);
|
||||
break;
|
||||
@ -1501,9 +1514,9 @@ SENSOR_DEVICE_ATTR_PWM_1TO3(3);
|
||||
/* PWMs 5-6 */
|
||||
|
||||
#define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
|
||||
static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO | S_IWUSR, \
|
||||
static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
|
||||
show_pwm, set_pwm, SYS_PWM, ix-1); \
|
||||
static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \
|
||||
static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
|
||||
show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
|
||||
static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
|
||||
show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
|
||||
@ -1517,91 +1530,75 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
|
||||
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
|
||||
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); /* for ISA devices */
|
||||
|
||||
#define SENSOR_DEV_ATTR_IN(ix) \
|
||||
&sensor_dev_attr_in##ix##_input.dev_attr.attr, \
|
||||
&sensor_dev_attr_in##ix##_min.dev_attr.attr, \
|
||||
&sensor_dev_attr_in##ix##_max.dev_attr.attr, \
|
||||
&sensor_dev_attr_in##ix##_alarm.dev_attr.attr
|
||||
|
||||
/* These attributes are read-writeable only if the chip is *not* locked */
|
||||
#define SENSOR_DEV_ATTR_TEMP_LOCK(ix) \
|
||||
&sensor_dev_attr_temp##ix##_offset.dev_attr.attr
|
||||
|
||||
#define SENSOR_DEV_ATTR_TEMP(ix) \
|
||||
SENSOR_DEV_ATTR_TEMP_LOCK(ix), \
|
||||
&sensor_dev_attr_temp##ix##_input.dev_attr.attr, \
|
||||
&sensor_dev_attr_temp##ix##_min.dev_attr.attr, \
|
||||
&sensor_dev_attr_temp##ix##_max.dev_attr.attr, \
|
||||
&sensor_dev_attr_temp##ix##_alarm.dev_attr.attr, \
|
||||
&sensor_dev_attr_temp##ix##_fault.dev_attr.attr
|
||||
|
||||
/* These attributes are read-writeable only if the chip is *not* locked */
|
||||
#define SENSOR_DEV_ATTR_ZONE_LOCK(ix) \
|
||||
&sensor_dev_attr_zone##ix##_auto_point1_temp_hyst.dev_attr.attr, \
|
||||
&sensor_dev_attr_zone##ix##_auto_point1_temp.dev_attr.attr, \
|
||||
&sensor_dev_attr_zone##ix##_auto_point2_temp.dev_attr.attr, \
|
||||
&sensor_dev_attr_zone##ix##_auto_point3_temp.dev_attr.attr
|
||||
|
||||
#define SENSOR_DEV_ATTR_ZONE(ix) \
|
||||
SENSOR_DEV_ATTR_ZONE_LOCK(ix), \
|
||||
&sensor_dev_attr_zone##ix##_auto_channels_temp.dev_attr.attr
|
||||
|
||||
#define SENSOR_DEV_ATTR_FAN_1TO4(ix) \
|
||||
&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
|
||||
&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
|
||||
&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
|
||||
&sensor_dev_attr_fan##ix##_type.dev_attr.attr
|
||||
|
||||
#define SENSOR_DEV_ATTR_FAN_5TO6(ix) \
|
||||
&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
|
||||
&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
|
||||
&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
|
||||
&sensor_dev_attr_fan##ix##_max.dev_attr.attr
|
||||
|
||||
/* These attributes are read-writeable only if the chip is *not* locked */
|
||||
#define SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix) \
|
||||
&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr, \
|
||||
&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr, \
|
||||
&sensor_dev_attr_pwm##ix##_ramp_rate.dev_attr.attr, \
|
||||
&sensor_dev_attr_pwm##ix##_auto_channels_zone.dev_attr.attr, \
|
||||
&sensor_dev_attr_pwm##ix##_auto_pwm_min.dev_attr.attr, \
|
||||
&sensor_dev_attr_pwm##ix##_auto_point1_pwm.dev_attr.attr
|
||||
|
||||
#define SENSOR_DEV_ATTR_PWM_1TO3(ix) \
|
||||
SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix), \
|
||||
&sensor_dev_attr_pwm##ix.dev_attr.attr, \
|
||||
&sensor_dev_attr_pwm##ix##_auto_point2_pwm.dev_attr.attr
|
||||
|
||||
/* These attributes are read-writeable only if the chip is *not* locked */
|
||||
#define SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix) \
|
||||
&sensor_dev_attr_pwm##ix.dev_attr.attr, \
|
||||
&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr
|
||||
|
||||
#define SENSOR_DEV_ATTR_PWM_5TO6(ix) \
|
||||
SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix), \
|
||||
&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr
|
||||
|
||||
/* This struct holds all the attributes that are always present and need to be
|
||||
* created unconditionally. The attributes that need modification of their
|
||||
* permissions are created read-only and write permissions are added or removed
|
||||
* on the fly when required */
|
||||
static struct attribute *dme1737_attr[] ={
|
||||
/* Voltages */
|
||||
SENSOR_DEV_ATTR_IN(0),
|
||||
SENSOR_DEV_ATTR_IN(1),
|
||||
SENSOR_DEV_ATTR_IN(2),
|
||||
SENSOR_DEV_ATTR_IN(3),
|
||||
SENSOR_DEV_ATTR_IN(4),
|
||||
SENSOR_DEV_ATTR_IN(5),
|
||||
SENSOR_DEV_ATTR_IN(6),
|
||||
&sensor_dev_attr_in0_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in0_min.dev_attr.attr,
|
||||
&sensor_dev_attr_in0_max.dev_attr.attr,
|
||||
&sensor_dev_attr_in0_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_in1_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in1_min.dev_attr.attr,
|
||||
&sensor_dev_attr_in1_max.dev_attr.attr,
|
||||
&sensor_dev_attr_in1_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_in2_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in2_min.dev_attr.attr,
|
||||
&sensor_dev_attr_in2_max.dev_attr.attr,
|
||||
&sensor_dev_attr_in2_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_in3_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in3_min.dev_attr.attr,
|
||||
&sensor_dev_attr_in3_max.dev_attr.attr,
|
||||
&sensor_dev_attr_in3_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_in4_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in4_min.dev_attr.attr,
|
||||
&sensor_dev_attr_in4_max.dev_attr.attr,
|
||||
&sensor_dev_attr_in4_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_in5_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in5_min.dev_attr.attr,
|
||||
&sensor_dev_attr_in5_max.dev_attr.attr,
|
||||
&sensor_dev_attr_in5_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_in6_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in6_min.dev_attr.attr,
|
||||
&sensor_dev_attr_in6_max.dev_attr.attr,
|
||||
&sensor_dev_attr_in6_alarm.dev_attr.attr,
|
||||
/* Temperatures */
|
||||
SENSOR_DEV_ATTR_TEMP(1),
|
||||
SENSOR_DEV_ATTR_TEMP(2),
|
||||
SENSOR_DEV_ATTR_TEMP(3),
|
||||
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_fault.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_offset.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_fault.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_offset.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_fault.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_offset.dev_attr.attr,
|
||||
/* Zones */
|
||||
SENSOR_DEV_ATTR_ZONE(1),
|
||||
SENSOR_DEV_ATTR_ZONE(2),
|
||||
SENSOR_DEV_ATTR_ZONE(3),
|
||||
&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
|
||||
&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
|
||||
&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
|
||||
&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr,
|
||||
/* Misc */
|
||||
&dev_attr_vrm.attr,
|
||||
&dev_attr_cpu0_vid.attr,
|
||||
@ -1616,23 +1613,48 @@ static const struct attribute_group dme1737_group = {
|
||||
* Their creation depends on the chip configuration which is determined during
|
||||
* module load. */
|
||||
static struct attribute *dme1737_attr_pwm1[] = {
|
||||
SENSOR_DEV_ATTR_PWM_1TO3(1),
|
||||
&sensor_dev_attr_pwm1.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_pwm2[] = {
|
||||
SENSOR_DEV_ATTR_PWM_1TO3(2),
|
||||
&sensor_dev_attr_pwm2.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_freq.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_pwm3[] = {
|
||||
SENSOR_DEV_ATTR_PWM_1TO3(3),
|
||||
&sensor_dev_attr_pwm3.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_pwm5[] = {
|
||||
SENSOR_DEV_ATTR_PWM_5TO6(5),
|
||||
&sensor_dev_attr_pwm5.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm5_freq.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm5_enable.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_pwm6[] = {
|
||||
SENSOR_DEV_ATTR_PWM_5TO6(6),
|
||||
&sensor_dev_attr_pwm6.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm6_freq.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm6_enable.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
@ -1649,27 +1671,45 @@ static const struct attribute_group dme1737_pwm_group[] = {
|
||||
* Their creation depends on the chip configuration which is determined during
|
||||
* module load. */
|
||||
static struct attribute *dme1737_attr_fan1[] = {
|
||||
SENSOR_DEV_ATTR_FAN_1TO4(1),
|
||||
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
||||
&sensor_dev_attr_fan1_min.dev_attr.attr,
|
||||
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_fan1_type.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_fan2[] = {
|
||||
SENSOR_DEV_ATTR_FAN_1TO4(2),
|
||||
&sensor_dev_attr_fan2_input.dev_attr.attr,
|
||||
&sensor_dev_attr_fan2_min.dev_attr.attr,
|
||||
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_fan2_type.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_fan3[] = {
|
||||
SENSOR_DEV_ATTR_FAN_1TO4(3),
|
||||
&sensor_dev_attr_fan3_input.dev_attr.attr,
|
||||
&sensor_dev_attr_fan3_min.dev_attr.attr,
|
||||
&sensor_dev_attr_fan3_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_fan3_type.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_fan4[] = {
|
||||
SENSOR_DEV_ATTR_FAN_1TO4(4),
|
||||
&sensor_dev_attr_fan4_input.dev_attr.attr,
|
||||
&sensor_dev_attr_fan4_min.dev_attr.attr,
|
||||
&sensor_dev_attr_fan4_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_fan4_type.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_fan5[] = {
|
||||
SENSOR_DEV_ATTR_FAN_5TO6(5),
|
||||
&sensor_dev_attr_fan5_input.dev_attr.attr,
|
||||
&sensor_dev_attr_fan5_min.dev_attr.attr,
|
||||
&sensor_dev_attr_fan5_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_fan5_max.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_fan6[] = {
|
||||
SENSOR_DEV_ATTR_FAN_5TO6(6),
|
||||
&sensor_dev_attr_fan6_input.dev_attr.attr,
|
||||
&sensor_dev_attr_fan6_min.dev_attr.attr,
|
||||
&sensor_dev_attr_fan6_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_fan6_max.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
@ -1686,13 +1726,22 @@ static const struct attribute_group dme1737_fan_group[] = {
|
||||
* writeable if the chip is *not* locked. Otherwise they stay read-only. */
|
||||
static struct attribute *dme1737_attr_lock[] = {
|
||||
/* Temperatures */
|
||||
SENSOR_DEV_ATTR_TEMP_LOCK(1),
|
||||
SENSOR_DEV_ATTR_TEMP_LOCK(2),
|
||||
SENSOR_DEV_ATTR_TEMP_LOCK(3),
|
||||
&sensor_dev_attr_temp1_offset.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_offset.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_offset.dev_attr.attr,
|
||||
/* Zones */
|
||||
SENSOR_DEV_ATTR_ZONE_LOCK(1),
|
||||
SENSOR_DEV_ATTR_ZONE_LOCK(2),
|
||||
SENSOR_DEV_ATTR_ZONE_LOCK(3),
|
||||
&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
|
||||
&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
|
||||
&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
|
||||
&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
@ -1704,23 +1753,40 @@ static const struct attribute_group dme1737_lock_group = {
|
||||
* writeable if the chip is *not* locked and the respective PWM is available.
|
||||
* Otherwise they stay read-only. */
|
||||
static struct attribute *dme1737_attr_pwm1_lock[] = {
|
||||
SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1),
|
||||
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_pwm2_lock[] = {
|
||||
SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2),
|
||||
&sensor_dev_attr_pwm2_freq.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_pwm3_lock[] = {
|
||||
SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3),
|
||||
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_pwm5_lock[] = {
|
||||
SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5),
|
||||
&sensor_dev_attr_pwm5.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm5_freq.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
static struct attribute *dme1737_attr_pwm6_lock[] = {
|
||||
SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6),
|
||||
&sensor_dev_attr_pwm6.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm6_freq.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
@ -2109,6 +2175,7 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address,
|
||||
|
||||
kind = dme1737;
|
||||
name = "dme1737";
|
||||
data->type = kind;
|
||||
|
||||
/* Fill in the remaining client fields and put it into the global
|
||||
* list */
|
||||
@ -2301,6 +2368,7 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
|
||||
err = -ENODEV;
|
||||
goto exit_kfree;
|
||||
}
|
||||
data->type = -1;
|
||||
|
||||
/* Fill in the remaining client fields and initialize the mutex */
|
||||
strlcpy(client->name, "sch311x", I2C_NAME_SIZE);
|
||||
@ -2377,7 +2445,10 @@ static int __init dme1737_init(void)
|
||||
}
|
||||
|
||||
if (dme1737_isa_detect(0x2e, &addr) &&
|
||||
dme1737_isa_detect(0x4e, &addr)) {
|
||||
dme1737_isa_detect(0x4e, &addr) &&
|
||||
(!probe_all_addr ||
|
||||
(dme1737_isa_detect(0x162e, &addr) &&
|
||||
dme1737_isa_detect(0x164e, &addr)))) {
|
||||
/* Return 0 if we didn't find an ISA device */
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -30,14 +30,37 @@
|
||||
#include "lm75.h"
|
||||
|
||||
|
||||
/* Addresses to scan */
|
||||
/*
|
||||
* This driver handles the LM75 and compatible digital temperature sensors.
|
||||
* Only types which are _not_ listed in I2C_CLIENT_INSMOD_*() need to be
|
||||
* listed here. We start at 9 since I2C_CLIENT_INSMOD_*() currently allow
|
||||
* definition of up to 8 chip types (plus zero).
|
||||
*/
|
||||
|
||||
enum lm75_type { /* keep sorted in alphabetical order */
|
||||
ds1775 = 9,
|
||||
ds75,
|
||||
/* lm75 -- in I2C_CLIENT_INSMOD_1() */
|
||||
lm75a,
|
||||
max6625,
|
||||
max6626,
|
||||
mcp980x,
|
||||
stds75,
|
||||
tcn75,
|
||||
tmp100,
|
||||
tmp101,
|
||||
tmp175,
|
||||
tmp275,
|
||||
tmp75,
|
||||
};
|
||||
|
||||
/* Addresses scanned by legacy style driver binding */
|
||||
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
|
||||
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
||||
|
||||
/* Insmod parameters */
|
||||
/* Insmod parameters (only for legacy style driver binding) */
|
||||
I2C_CLIENT_INSMOD_1(lm75);
|
||||
|
||||
/* Many LM75 constants specified below */
|
||||
|
||||
/* The LM75 registers */
|
||||
#define LM75_REG_CONF 0x01
|
||||
@ -49,10 +72,11 @@ static const u8 LM75_REG_TEMP[3] = {
|
||||
|
||||
/* Each client has this additional data */
|
||||
struct lm75_data {
|
||||
struct i2c_client client;
|
||||
struct device *hwmon_dev;
|
||||
struct i2c_client *client;
|
||||
struct device *hwmon_dev;
|
||||
struct mutex update_lock;
|
||||
char valid; /* !=0 if following fields are valid */
|
||||
u8 orig_conf;
|
||||
char valid; /* !=0 if registers are valid */
|
||||
unsigned long last_updated; /* In jiffies */
|
||||
u16 temp[3]; /* Register values,
|
||||
0 = input
|
||||
@ -60,23 +84,14 @@ struct lm75_data {
|
||||
2 = hyst */
|
||||
};
|
||||
|
||||
static int lm75_attach_adapter(struct i2c_adapter *adapter);
|
||||
static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
|
||||
static void lm75_init_client(struct i2c_client *client);
|
||||
static int lm75_detach_client(struct i2c_client *client);
|
||||
static int lm75_read_value(struct i2c_client *client, u8 reg);
|
||||
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
|
||||
static struct lm75_data *lm75_update_device(struct device *dev);
|
||||
|
||||
|
||||
/* This is the driver that will be inserted */
|
||||
static struct i2c_driver lm75_driver = {
|
||||
.driver = {
|
||||
.name = "lm75",
|
||||
},
|
||||
.attach_adapter = lm75_attach_adapter,
|
||||
.detach_client = lm75_detach_client,
|
||||
};
|
||||
/*-----------------------------------------------------------------------*/
|
||||
|
||||
/* sysfs attributes for hwmon */
|
||||
|
||||
static ssize_t show_temp(struct device *dev, struct device_attribute *da,
|
||||
char *buf)
|
||||
@ -109,13 +124,6 @@ static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
|
||||
show_temp, set_temp, 2);
|
||||
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
|
||||
|
||||
static int lm75_attach_adapter(struct i2c_adapter *adapter)
|
||||
{
|
||||
if (!(adapter->class & I2C_CLASS_HWMON))
|
||||
return 0;
|
||||
return i2c_probe(adapter, &addr_data, lm75_detect);
|
||||
}
|
||||
|
||||
static struct attribute *lm75_attributes[] = {
|
||||
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
||||
@ -128,32 +136,144 @@ static const struct attribute_group lm75_group = {
|
||||
.attrs = lm75_attributes,
|
||||
};
|
||||
|
||||
/*-----------------------------------------------------------------------*/
|
||||
|
||||
/* "New style" I2C driver binding -- following the driver model */
|
||||
|
||||
static int
|
||||
lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
||||
{
|
||||
struct lm75_data *data;
|
||||
int status;
|
||||
u8 set_mask, clr_mask;
|
||||
int new;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
|
||||
return -EIO;
|
||||
|
||||
data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
i2c_set_clientdata(client, data);
|
||||
|
||||
data->client = client;
|
||||
mutex_init(&data->update_lock);
|
||||
|
||||
/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
|
||||
* Then tweak to be more precise when appropriate.
|
||||
*/
|
||||
set_mask = 0;
|
||||
clr_mask = (1 << 0) /* continuous conversions */
|
||||
| (1 << 6) | (1 << 5); /* 9-bit mode */
|
||||
|
||||
/* configure as specified */
|
||||
status = lm75_read_value(client, LM75_REG_CONF);
|
||||
if (status < 0) {
|
||||
dev_dbg(&client->dev, "Can't read config? %d\n", status);
|
||||
goto exit_free;
|
||||
}
|
||||
data->orig_conf = status;
|
||||
new = status & ~clr_mask;
|
||||
new |= set_mask;
|
||||
if (status != new)
|
||||
lm75_write_value(client, LM75_REG_CONF, new);
|
||||
dev_dbg(&client->dev, "Config %02x\n", new);
|
||||
|
||||
/* Register sysfs hooks */
|
||||
status = sysfs_create_group(&client->dev.kobj, &lm75_group);
|
||||
if (status)
|
||||
goto exit_free;
|
||||
|
||||
data->hwmon_dev = hwmon_device_register(&client->dev);
|
||||
if (IS_ERR(data->hwmon_dev)) {
|
||||
status = PTR_ERR(data->hwmon_dev);
|
||||
goto exit_remove;
|
||||
}
|
||||
|
||||
dev_info(&client->dev, "%s: sensor '%s'\n",
|
||||
data->hwmon_dev->bus_id, client->name);
|
||||
|
||||
return 0;
|
||||
|
||||
exit_remove:
|
||||
sysfs_remove_group(&client->dev.kobj, &lm75_group);
|
||||
exit_free:
|
||||
i2c_set_clientdata(client, NULL);
|
||||
kfree(data);
|
||||
return status;
|
||||
}
|
||||
|
||||
static int lm75_remove(struct i2c_client *client)
|
||||
{
|
||||
struct lm75_data *data = i2c_get_clientdata(client);
|
||||
|
||||
hwmon_device_unregister(data->hwmon_dev);
|
||||
sysfs_remove_group(&client->dev.kobj, &lm75_group);
|
||||
lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
|
||||
i2c_set_clientdata(client, NULL);
|
||||
kfree(data);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id lm75_ids[] = {
|
||||
{ "ds1775", ds1775, },
|
||||
{ "ds75", ds75, },
|
||||
{ "lm75", lm75, },
|
||||
{ "lm75a", lm75a, },
|
||||
{ "max6625", max6625, },
|
||||
{ "max6626", max6626, },
|
||||
{ "mcp980x", mcp980x, },
|
||||
{ "stds75", stds75, },
|
||||
{ "tcn75", tcn75, },
|
||||
{ "tmp100", tmp100, },
|
||||
{ "tmp101", tmp101, },
|
||||
{ "tmp175", tmp175, },
|
||||
{ "tmp275", tmp275, },
|
||||
{ "tmp75", tmp75, },
|
||||
{ /* LIST END */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, lm75_ids);
|
||||
|
||||
static struct i2c_driver lm75_driver = {
|
||||
.driver = {
|
||||
.name = "lm75",
|
||||
},
|
||||
.probe = lm75_probe,
|
||||
.remove = lm75_remove,
|
||||
.id_table = lm75_ids,
|
||||
};
|
||||
|
||||
/*-----------------------------------------------------------------------*/
|
||||
|
||||
/* "Legacy" I2C driver binding */
|
||||
|
||||
static struct i2c_driver lm75_legacy_driver;
|
||||
|
||||
/* This function is called by i2c_probe */
|
||||
static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
|
||||
{
|
||||
int i;
|
||||
struct i2c_client *new_client;
|
||||
struct lm75_data *data;
|
||||
int err = 0;
|
||||
const char *name = "";
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
||||
I2C_FUNC_SMBUS_WORD_DATA))
|
||||
goto exit;
|
||||
|
||||
/* OK. For now, we presume we have a valid client. We now create the
|
||||
client structure, even though we cannot fill it completely yet.
|
||||
But it allows us to access lm75_{read,write}_value. */
|
||||
if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
|
||||
/* OK. For now, we presume we have a valid address. We create the
|
||||
client structure, even though there may be no sensor present.
|
||||
But it allows us to use i2c_smbus_read_*_data() calls. */
|
||||
new_client = kzalloc(sizeof *new_client, GFP_KERNEL);
|
||||
if (!new_client) {
|
||||
err = -ENOMEM;
|
||||
goto exit;
|
||||
}
|
||||
|
||||
new_client = &data->client;
|
||||
i2c_set_clientdata(new_client, data);
|
||||
new_client->addr = address;
|
||||
new_client->adapter = adapter;
|
||||
new_client->driver = &lm75_driver;
|
||||
new_client->driver = &lm75_legacy_driver;
|
||||
new_client->flags = 0;
|
||||
|
||||
/* Now, we do the remaining detection. There is no identification-
|
||||
@ -174,17 +294,17 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
|
||||
|| i2c_smbus_read_word_data(new_client, 5) != hyst
|
||||
|| i2c_smbus_read_word_data(new_client, 6) != hyst
|
||||
|| i2c_smbus_read_word_data(new_client, 7) != hyst)
|
||||
goto exit_free;
|
||||
goto exit_free;
|
||||
os = i2c_smbus_read_word_data(new_client, 3);
|
||||
if (i2c_smbus_read_word_data(new_client, 4) != os
|
||||
|| i2c_smbus_read_word_data(new_client, 5) != os
|
||||
|| i2c_smbus_read_word_data(new_client, 6) != os
|
||||
|| i2c_smbus_read_word_data(new_client, 7) != os)
|
||||
goto exit_free;
|
||||
goto exit_free;
|
||||
|
||||
/* Unused bits */
|
||||
if (conf & 0xe0)
|
||||
goto exit_free;
|
||||
goto exit_free;
|
||||
|
||||
/* Addresses cycling */
|
||||
for (i = 8; i < 0xff; i += 8)
|
||||
@ -194,58 +314,57 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
|
||||
goto exit_free;
|
||||
}
|
||||
|
||||
/* Determine the chip type - only one kind supported! */
|
||||
if (kind <= 0)
|
||||
kind = lm75;
|
||||
|
||||
if (kind == lm75) {
|
||||
name = "lm75";
|
||||
}
|
||||
|
||||
/* Fill in the remaining client fields and put it into the global list */
|
||||
strlcpy(new_client->name, name, I2C_NAME_SIZE);
|
||||
data->valid = 0;
|
||||
mutex_init(&data->update_lock);
|
||||
/* NOTE: we treat "force=..." and "force_lm75=..." the same.
|
||||
* Only new-style driver binding distinguishes chip types.
|
||||
*/
|
||||
strlcpy(new_client->name, "lm75", I2C_NAME_SIZE);
|
||||
|
||||
/* Tell the I2C layer a new client has arrived */
|
||||
if ((err = i2c_attach_client(new_client)))
|
||||
err = i2c_attach_client(new_client);
|
||||
if (err)
|
||||
goto exit_free;
|
||||
|
||||
/* Initialize the LM75 chip */
|
||||
lm75_init_client(new_client);
|
||||
|
||||
/* Register sysfs hooks */
|
||||
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group)))
|
||||
err = lm75_probe(new_client, NULL);
|
||||
if (err < 0)
|
||||
goto exit_detach;
|
||||
|
||||
data->hwmon_dev = hwmon_device_register(&new_client->dev);
|
||||
if (IS_ERR(data->hwmon_dev)) {
|
||||
err = PTR_ERR(data->hwmon_dev);
|
||||
goto exit_remove;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
exit_remove:
|
||||
sysfs_remove_group(&new_client->dev.kobj, &lm75_group);
|
||||
exit_detach:
|
||||
i2c_detach_client(new_client);
|
||||
exit_free:
|
||||
kfree(data);
|
||||
kfree(new_client);
|
||||
exit:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int lm75_attach_adapter(struct i2c_adapter *adapter)
|
||||
{
|
||||
if (!(adapter->class & I2C_CLASS_HWMON))
|
||||
return 0;
|
||||
return i2c_probe(adapter, &addr_data, lm75_detect);
|
||||
}
|
||||
|
||||
static int lm75_detach_client(struct i2c_client *client)
|
||||
{
|
||||
struct lm75_data *data = i2c_get_clientdata(client);
|
||||
hwmon_device_unregister(data->hwmon_dev);
|
||||
sysfs_remove_group(&client->dev.kobj, &lm75_group);
|
||||
lm75_remove(client);
|
||||
i2c_detach_client(client);
|
||||
kfree(data);
|
||||
kfree(client);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct i2c_driver lm75_legacy_driver = {
|
||||
.driver = {
|
||||
.name = "lm75_legacy",
|
||||
},
|
||||
.attach_adapter = lm75_attach_adapter,
|
||||
.detach_client = lm75_detach_client,
|
||||
};
|
||||
|
||||
/*-----------------------------------------------------------------------*/
|
||||
|
||||
/* register access */
|
||||
|
||||
/* All registers are word-sized, except for the configuration register.
|
||||
LM75 uses a high-byte first convention, which is exactly opposite to
|
||||
the SMBus standard. */
|
||||
@ -268,16 +387,6 @@ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
|
||||
return i2c_smbus_write_word_data(client, reg, swab16(value));
|
||||
}
|
||||
|
||||
static void lm75_init_client(struct i2c_client *client)
|
||||
{
|
||||
int reg;
|
||||
|
||||
/* Enable if in shutdown mode */
|
||||
reg = lm75_read_value(client, LM75_REG_CONF);
|
||||
if (reg >= 0 && (reg & 0x01))
|
||||
lm75_write_value(client, LM75_REG_CONF, reg & 0xfe);
|
||||
}
|
||||
|
||||
static struct lm75_data *lm75_update_device(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
@ -309,13 +418,28 @@ static struct lm75_data *lm75_update_device(struct device *dev)
|
||||
return data;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------*/
|
||||
|
||||
/* module glue */
|
||||
|
||||
static int __init sensors_lm75_init(void)
|
||||
{
|
||||
return i2c_add_driver(&lm75_driver);
|
||||
int status;
|
||||
|
||||
status = i2c_add_driver(&lm75_driver);
|
||||
if (status < 0)
|
||||
return status;
|
||||
|
||||
status = i2c_add_driver(&lm75_legacy_driver);
|
||||
if (status < 0)
|
||||
i2c_del_driver(&lm75_driver);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
static void __exit sensors_lm75_exit(void)
|
||||
{
|
||||
i2c_del_driver(&lm75_legacy_driver);
|
||||
i2c_del_driver(&lm75_driver);
|
||||
}
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user