r8169: use standard #defines from mii.h instead of declaring private ones

Some unused stuff goes away btw.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
This commit is contained in:
Francois Romieu 2006-08-17 12:43:06 +02:00
parent 5b0384f4fd
commit 64e4bfb40c

View File

@ -356,31 +356,6 @@ enum RTL8169_register_content {
LinkStatus = 0x02,
FullDup = 0x01,
/* GIGABIT_PHY_registers */
PHY_CTRL_REG = 0,
PHY_STAT_REG = 1,
PHY_AUTO_NEGO_REG = 4,
PHY_1000_CTRL_REG = 9,
/* GIGABIT_PHY_REG_BIT */
PHY_Restart_Auto_Nego = 0x0200,
PHY_Enable_Auto_Nego = 0x1000,
/* PHY_STAT_REG = 1 */
PHY_Auto_Neco_Comp = 0x0020,
/* PHY_AUTO_NEGO_REG = 4 */
PHY_Cap_10_Half = 0x0020,
PHY_Cap_10_Full = 0x0040,
PHY_Cap_100_Half = 0x0080,
PHY_Cap_100_Full = 0x0100,
/* PHY_1000_CTRL_REG = 9 */
PHY_Cap_1000_Half = 0x0100,
PHY_Cap_1000_Full = 0x0200,
PHY_Cap_Null = 0x0,
/* _MediaType */
_10_Half = 0x01,
_10_Full = 0x02,
@ -522,11 +497,6 @@ static const u16 rtl8169_napi_event =
static const unsigned int rtl8169_rx_config =
(RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
#define PHY_Cap_10_Half_Or_Less PHY_Cap_10_Half
#define PHY_Cap_10_Full_Or_Less PHY_Cap_10_Full | PHY_Cap_10_Half_Or_Less
#define PHY_Cap_100_Half_Or_Less PHY_Cap_100_Half | PHY_Cap_10_Full_Or_Less
#define PHY_Cap_100_Full_Or_Less PHY_Cap_100_Full | PHY_Cap_100_Half_Or_Less
static void mdio_write(void __iomem *ioaddr, int RegAddr, int value)
{
int i;
@ -579,7 +549,7 @@ static unsigned int rtl8169_tbi_reset_pending(void __iomem *ioaddr)
static unsigned int rtl8169_xmii_reset_pending(void __iomem *ioaddr)
{
return mdio_read(ioaddr, 0) & 0x8000;
return mdio_read(ioaddr, MII_BMCR) & BMCR_RESET;
}
static unsigned int rtl8169_tbi_link_ok(void __iomem *ioaddr)
@ -601,8 +571,8 @@ static void rtl8169_xmii_reset_enable(void __iomem *ioaddr)
{
unsigned int val;
val = (mdio_read(ioaddr, PHY_CTRL_REG) | 0x8000) & 0xffff;
mdio_write(ioaddr, PHY_CTRL_REG, val);
val = (mdio_read(ioaddr, MII_BMCR) | BMCR_RESET) & 0xffff;
mdio_write(ioaddr, MII_BMCR, val);
}
static void rtl8169_check_link_status(struct net_device *dev,
@ -777,34 +747,34 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
void __iomem *ioaddr = tp->mmio_addr;
int auto_nego, giga_ctrl;
auto_nego = mdio_read(ioaddr, PHY_AUTO_NEGO_REG);
auto_nego &= ~(PHY_Cap_10_Half | PHY_Cap_10_Full |
PHY_Cap_100_Half | PHY_Cap_100_Full);
giga_ctrl = mdio_read(ioaddr, PHY_1000_CTRL_REG);
giga_ctrl &= ~(PHY_Cap_1000_Full | PHY_Cap_1000_Half | PHY_Cap_Null);
auto_nego = mdio_read(ioaddr, MII_ADVERTISE);
auto_nego &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_100HALF | ADVERTISE_100FULL);
giga_ctrl = mdio_read(ioaddr, MII_CTRL1000);
giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
if (autoneg == AUTONEG_ENABLE) {
auto_nego |= (PHY_Cap_10_Half | PHY_Cap_10_Full |
PHY_Cap_100_Half | PHY_Cap_100_Full);
giga_ctrl |= PHY_Cap_1000_Full | PHY_Cap_1000_Half;
auto_nego |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_100HALF | ADVERTISE_100FULL);
giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
} else {
if (speed == SPEED_10)
auto_nego |= PHY_Cap_10_Half | PHY_Cap_10_Full;
auto_nego |= ADVERTISE_10HALF | ADVERTISE_10FULL;
else if (speed == SPEED_100)
auto_nego |= PHY_Cap_100_Half | PHY_Cap_100_Full;
auto_nego |= ADVERTISE_100HALF | ADVERTISE_100FULL;
else if (speed == SPEED_1000)
giga_ctrl |= PHY_Cap_1000_Full | PHY_Cap_1000_Half;
giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
if (duplex == DUPLEX_HALF)
auto_nego &= ~(PHY_Cap_10_Full | PHY_Cap_100_Full);
auto_nego &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL);
if (duplex == DUPLEX_FULL)
auto_nego &= ~(PHY_Cap_10_Half | PHY_Cap_100_Half);
auto_nego &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF);
/* This tweak comes straight from Realtek's driver. */
if ((speed == SPEED_100) && (duplex == DUPLEX_HALF) &&
(tp->mac_version == RTL_GIGA_MAC_VER_13)) {
auto_nego = PHY_Cap_100_Half | 0x01;
auto_nego = ADVERTISE_100HALF | ADVERTISE_CSMA;
}
}
@ -812,12 +782,12 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
if ((tp->mac_version == RTL_GIGA_MAC_VER_13) ||
(tp->mac_version == RTL_GIGA_MAC_VER_14) ||
(tp->mac_version == RTL_GIGA_MAC_VER_15)) {
if ((giga_ctrl & (PHY_Cap_1000_Full | PHY_Cap_1000_Half)) &&
if ((giga_ctrl & (ADVERTISE_1000FULL | ADVERTISE_1000HALF)) &&
netif_msg_link(tp)) {
printk(KERN_INFO "%s: PHY does not support 1000Mbps.\n",
dev->name);
}
giga_ctrl &= ~(PHY_Cap_1000_Full | PHY_Cap_1000_Half);
giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
}
auto_nego |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
@ -825,10 +795,9 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
tp->phy_auto_nego_reg = auto_nego;
tp->phy_1000_ctrl_reg = giga_ctrl;
mdio_write(ioaddr, PHY_AUTO_NEGO_REG, auto_nego);
mdio_write(ioaddr, PHY_1000_CTRL_REG, giga_ctrl);
mdio_write(ioaddr, PHY_CTRL_REG, PHY_Enable_Auto_Nego |
PHY_Restart_Auto_Nego);
mdio_write(ioaddr, MII_ADVERTISE, auto_nego);
mdio_write(ioaddr, MII_CTRL1000, giga_ctrl);
mdio_write(ioaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
return 0;
}
@ -840,7 +809,7 @@ static int rtl8169_set_speed(struct net_device *dev,
ret = tp->set_speed(dev, autoneg, speed, duplex);
if (netif_running(dev) && (tp->phy_1000_ctrl_reg & PHY_Cap_1000_Full))
if (netif_running(dev) && (tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT);
return ret;
@ -993,15 +962,15 @@ static void rtl8169_gset_xmii(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->autoneg = 1;
cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg;
if (tp->phy_auto_nego_reg & PHY_Cap_10_Half)
if (tp->phy_auto_nego_reg & ADVERTISE_10HALF)
cmd->advertising |= ADVERTISED_10baseT_Half;
if (tp->phy_auto_nego_reg & PHY_Cap_10_Full)
if (tp->phy_auto_nego_reg & ADVERTISE_10FULL)
cmd->advertising |= ADVERTISED_10baseT_Full;
if (tp->phy_auto_nego_reg & PHY_Cap_100_Half)
if (tp->phy_auto_nego_reg & ADVERTISE_100HALF)
cmd->advertising |= ADVERTISED_100baseT_Half;
if (tp->phy_auto_nego_reg & PHY_Cap_100_Full)
if (tp->phy_auto_nego_reg & ADVERTISE_100FULL)
cmd->advertising |= ADVERTISED_100baseT_Full;
if (tp->phy_1000_ctrl_reg & PHY_Cap_1000_Full)
if (tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL)
cmd->advertising |= ADVERTISED_1000baseT_Full;
status = RTL_R8(PHYstatus);
@ -1235,7 +1204,7 @@ static void rtl8169_get_phy_version(struct rtl8169_private *tp, void __iomem *io
}, *p = phy_info;
u16 reg;
reg = mdio_read(ioaddr, 3) & 0xffff;
reg = mdio_read(ioaddr, MII_PHYSID2) & 0xffff;
while ((reg & p->mask) != p->set)
p++;
tp->phy_version = p->phy_version;
@ -1355,7 +1324,7 @@ static void rtl8169_phy_timer(unsigned long __opaque)
assert(tp->mac_version > RTL_GIGA_MAC_VER_01);
assert(tp->phy_version < RTL_GIGA_PHY_VER_H);
if (!(tp->phy_1000_ctrl_reg & PHY_Cap_1000_Full))
if (!(tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
return;
spin_lock_irq(&tp->lock);
@ -1663,7 +1632,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->phy_reset_pending = rtl8169_tbi_reset_pending;
tp->link_ok = rtl8169_tbi_link_ok;
tp->phy_1000_ctrl_reg = PHY_Cap_1000_Full; /* Implied by TBI */
tp->phy_1000_ctrl_reg = ADVERTISE_1000FULL; /* Implied by TBI */
} else {
tp->set_speed = rtl8169_set_speed_xmii;
tp->get_settings = rtl8169_gset_xmii;