diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 71f55bbcefc8..615142da4ef6 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -38,9 +38,10 @@ Module Parameters Disable selected features normally supported by the device. This makes it possible to work around possible driver or hardware bugs if the feature in question doesn't work as intended for whatever reason. Bit values: - 1 disable SMBus PEC - 2 disable the block buffer - 8 disable the I2C block read functionality + 0x01 disable SMBus PEC + 0x02 disable the block buffer + 0x08 disable the I2C block read functionality + 0x10 don't use interrupts Description @@ -86,6 +87,12 @@ SMBus 2.0 Support The 82801DB (ICH4) and later chips support several SMBus 2.0 features. +Interrupt Support +----------------- + +PCI interrupt support is supported on the 82801EB (ICH5) and later chips. + + Hidden ICH SMBus ---------------- diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index a1ce4e68b49a..bcce18dfcc39 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -60,10 +60,12 @@ Block process call transaction no I2C block read transaction yes (doesn't use the block buffer) Slave mode no + Interrupt processing yes See the file Documentation/i2c/busses/i2c-i801 for details. */ +#include #include #include #include @@ -76,6 +78,7 @@ #include #include #include +#include /* I801 SMBus address offsets */ #define SMBHSTSTS(p) (0 + (p)->smba) @@ -91,8 +94,12 @@ /* PCI Address Constants */ #define SMBBAR 4 +#define SMBPCISTS 0x006 #define SMBHSTCFG 0x040 +/* Host status bits for SMBPCISTS */ +#define SMBPCISTS_INTS 0x08 + /* Host configuration bits for SMBHSTCFG */ #define SMBHSTCFG_HST_EN 1 #define SMBHSTCFG_SMB_SMI_EN 2 @@ -155,6 +162,10 @@ struct i801_priv { unsigned char original_hstcfg; struct pci_dev *pci_dev; unsigned int features; + + /* isr processing */ + wait_queue_head_t waitq; + u8 status; }; static struct pci_driver i801_driver; @@ -163,6 +174,7 @@ static struct pci_driver i801_driver; #define FEATURE_BLOCK_BUFFER (1 << 1) #define FEATURE_BLOCK_PROC (1 << 2) #define FEATURE_I2C_BLOCK_READ (1 << 3) +#define FEATURE_IRQ (1 << 4) /* Not really a feature, but it's convenient to handle it as such */ #define FEATURE_IDF (1 << 15) @@ -171,6 +183,7 @@ static const char *i801_feature_names[] = { "Block buffer", "Block process call", "I2C block read", + "Interrupt", }; static unsigned int disable_features; @@ -215,7 +228,12 @@ static int i801_check_post(struct i801_priv *priv, int status) { int result = 0; - /* If the SMBus is still busy, we give up */ + /* + * If the SMBus is still busy, we give up + * Note: This timeout condition only happens when using polling + * transactions. For interrupt operation, NAK/timeout is indicated by + * DEV_ERR. + */ if (unlikely(status < 0)) { dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); /* try to stop the current command */ @@ -305,6 +323,14 @@ static int i801_transaction(struct i801_priv *priv, int xact) if (result < 0) return result; + if (priv->features & FEATURE_IRQ) { + outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START, + SMBHSTCNT(priv)); + wait_event(priv->waitq, (status = priv->status)); + priv->status = 0; + return i801_check_post(priv, status); + } + /* the current contents of SMBHSTCNT can be overwritten, since PEC, * SMBSCMD are passed in xact */ outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); @@ -347,6 +373,44 @@ static int i801_block_transaction_by_block(struct i801_priv *priv, return 0; } +/* + * i801 signals transaction completion with one of these interrupts: + * INTR - Success + * DEV_ERR - Invalid command, NAK or communication timeout + * BUS_ERR - SMI# transaction collision + * FAILED - transaction was canceled due to a KILL request + * When any of these occur, update ->status and wake up the waitq. + * ->status must be cleared before kicking off the next transaction. + */ +static irqreturn_t i801_isr(int irq, void *dev_id) +{ + struct i801_priv *priv = dev_id; + u16 pcists; + u8 status; + + /* Confirm this is our interrupt */ + pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists); + if (!(pcists & SMBPCISTS_INTS)) + return IRQ_NONE; + + status = inb_p(SMBHSTSTS(priv)); + if (status != 0x42) + dev_dbg(&priv->pci_dev->dev, "irq: status = %02x\n", status); + + /* + * Clear irq sources and report transaction result. + * ->status must be cleared before the next transaction is started. + */ + status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS; + if (status) { + outb_p(status, SMBHSTSTS(priv)); + priv->status |= status; + wake_up(&priv->waitq); + } + + return IRQ_HANDLED; +} + /* * For "byte-by-byte" block transactions: * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1 @@ -799,6 +863,10 @@ static int __devinit i801_probe(struct pci_dev *dev, break; } + /* IRQ processing only tested on CougarPoint PCH */ + if (dev->device == PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) + priv->features |= FEATURE_IRQ; + /* Disable features on user request */ for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { if (priv->features & disable_features & (1 << i)) @@ -846,16 +914,31 @@ static int __devinit i801_probe(struct pci_dev *dev, } pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp); - if (temp & SMBHSTCFG_SMB_SMI_EN) + if (temp & SMBHSTCFG_SMB_SMI_EN) { dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); - else + /* Disable SMBus interrupt feature if SMBus using SMI# */ + priv->features &= ~FEATURE_IRQ; + } else { dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n"); + } /* Clear special mode bits */ if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); + if (priv->features & FEATURE_IRQ) { + init_waitqueue_head(&priv->waitq); + + err = request_irq(dev->irq, i801_isr, IRQF_SHARED, + i801_driver.name, priv); + if (err) { + dev_err(&dev->dev, "Failed to allocate irq %d: %d\n", + dev->irq, err); + goto exit_release; + } + } + /* set up the sysfs linkage to our parent device */ priv->adapter.dev.parent = &dev->dev; @@ -867,14 +950,18 @@ static int __devinit i801_probe(struct pci_dev *dev, err = i2c_add_adapter(&priv->adapter); if (err) { dev_err(&dev->dev, "Failed to add SMBus adapter\n"); - goto exit_release; + goto exit_free_irq; } i801_probe_optional_slaves(priv); pci_set_drvdata(dev, priv); + return 0; +exit_free_irq: + if (priv->features & FEATURE_IRQ) + free_irq(dev->irq, priv); exit_release: pci_release_region(dev, SMBBAR); exit: @@ -888,7 +975,11 @@ static void __devexit i801_remove(struct pci_dev *dev) i2c_del_adapter(&priv->adapter); pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); + + if (priv->features & FEATURE_IRQ) + free_irq(dev->irq, priv); pci_release_region(dev, SMBBAR); + pci_set_drvdata(dev, NULL); kfree(priv); /*