mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 14:42:24 +00:00
hwmon: (vt8231) Fix multi-line comments
Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Roger Lucas <vt8231@hiddenengine.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck
Guenter Roeck
parent
9ed5bc24fa
commit
61ba031841
@ -1,28 +1,29 @@
|
||||
/*
|
||||
vt8231.c - Part of lm_sensors, Linux kernel modules
|
||||
for hardware monitoring
|
||||
* vt8231.c - Part of lm_sensors, Linux kernel modules
|
||||
* for hardware monitoring
|
||||
*
|
||||
* Copyright (c) 2005 Roger Lucas <vt8231@hiddenengine.co.uk>
|
||||
* Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
|
||||
* Aaron M. Marsh <amarsh@sdf.lonestar.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
Copyright (c) 2005 Roger Lucas <vt8231@hiddenengine.co.uk>
|
||||
Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
|
||||
Aaron M. Marsh <amarsh@sdf.lonestar.org>
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program; if not, write to the Free Software
|
||||
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
/* Supports VIA VT8231 South Bridge embedded sensors
|
||||
*/
|
||||
/*
|
||||
* Supports VIA VT8231 South Bridge embedded sensors
|
||||
*/
|
||||
|
||||
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
||||
|
||||
@ -50,26 +51,27 @@ static struct platform_device *pdev;
|
||||
#define VT8231_BASE_REG 0x70
|
||||
#define VT8231_ENABLE_REG 0x74
|
||||
|
||||
/* The VT8231 registers
|
||||
|
||||
The reset value for the input channel configuration is used (Reg 0x4A=0x07)
|
||||
which sets the selected inputs marked with '*' below if multiple options are
|
||||
possible:
|
||||
|
||||
Voltage Mode Temperature Mode
|
||||
Sensor Linux Id Linux Id VIA Id
|
||||
-------- -------- -------- ------
|
||||
CPU Diode N/A temp1 0
|
||||
UIC1 in0 temp2 * 1
|
||||
UIC2 in1 * temp3 2
|
||||
UIC3 in2 * temp4 3
|
||||
UIC4 in3 * temp5 4
|
||||
UIC5 in4 * temp6 5
|
||||
3.3V in5 N/A
|
||||
|
||||
Note that the BIOS may set the configuration register to a different value
|
||||
to match the motherboard configuration.
|
||||
*/
|
||||
/*
|
||||
* The VT8231 registers
|
||||
*
|
||||
* The reset value for the input channel configuration is used (Reg 0x4A=0x07)
|
||||
* which sets the selected inputs marked with '*' below if multiple options are
|
||||
* possible:
|
||||
*
|
||||
* Voltage Mode Temperature Mode
|
||||
* Sensor Linux Id Linux Id VIA Id
|
||||
* -------- -------- -------- ------
|
||||
* CPU Diode N/A temp1 0
|
||||
* UIC1 in0 temp2 * 1
|
||||
* UIC2 in1 * temp3 2
|
||||
* UIC3 in2 * temp4 3
|
||||
* UIC4 in3 * temp5 4
|
||||
* UIC5 in4 * temp6 5
|
||||
* 3.3V in5 N/A
|
||||
*
|
||||
* Note that the BIOS may set the configuration register to a different value
|
||||
* to match the motherboard configuration.
|
||||
*/
|
||||
|
||||
/* fans numbered 0-1 */
|
||||
#define VT8231_REG_FAN_MIN(nr) (0x3b + (nr))
|
||||
@ -81,13 +83,14 @@ static const u8 regvolt[] = { 0x21, 0x22, 0x23, 0x24, 0x25, 0x26 };
|
||||
static const u8 regvoltmax[] = { 0x3d, 0x2b, 0x2d, 0x2f, 0x31, 0x33 };
|
||||
static const u8 regvoltmin[] = { 0x3e, 0x2c, 0x2e, 0x30, 0x32, 0x34 };
|
||||
|
||||
/* Temperatures are numbered 1-6 according to the Linux kernel specification.
|
||||
**
|
||||
** In the VIA datasheet, however, the temperatures are numbered from zero.
|
||||
** Since it is important that this driver can easily be compared to the VIA
|
||||
** datasheet, we will use the VIA numbering within this driver and map the
|
||||
** kernel sysfs device name to the VIA number in the sysfs callback.
|
||||
*/
|
||||
/*
|
||||
* Temperatures are numbered 1-6 according to the Linux kernel specification.
|
||||
*
|
||||
* In the VIA datasheet, however, the temperatures are numbered from zero.
|
||||
* Since it is important that this driver can easily be compared to the VIA
|
||||
* datasheet, we will use the VIA numbering within this driver and map the
|
||||
* kernel sysfs device name to the VIA number in the sysfs callback.
|
||||
*/
|
||||
|
||||
#define VT8231_REG_TEMP_LOW01 0x49
|
||||
#define VT8231_REG_TEMP_LOW25 0x4d
|
||||
@ -108,9 +111,10 @@ static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 };
|
||||
#define VT8231_REG_TEMP1_CONFIG 0x4b
|
||||
#define VT8231_REG_TEMP2_CONFIG 0x4c
|
||||
|
||||
/* temps 0-5 as numbered in VIA datasheet - see later for mapping to Linux
|
||||
** numbering
|
||||
*/
|
||||
/*
|
||||
* temps 0-5 as numbered in VIA datasheet - see later for mapping to Linux
|
||||
* numbering
|
||||
*/
|
||||
#define ISTEMP(i, ch_config) ((i) == 0 ? 1 : \
|
||||
((ch_config) >> ((i)+1)) & 0x01)
|
||||
/* voltages 0-5 */
|
||||
@ -119,24 +123,26 @@ static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 };
|
||||
|
||||
#define DIV_FROM_REG(val) (1 << (val))
|
||||
|
||||
/* NB The values returned here are NOT temperatures. The calibration curves
|
||||
** for the thermistor curves are board-specific and must go in the
|
||||
** sensors.conf file. Temperature sensors are actually ten bits, but the
|
||||
** VIA datasheet only considers the 8 MSBs obtained from the regtemp[]
|
||||
** register. The temperature value returned should have a magnitude of 3,
|
||||
** so we use the VIA scaling as the "true" scaling and use the remaining 2
|
||||
** LSBs as fractional precision.
|
||||
**
|
||||
** All the on-chip hardware temperature comparisons for the alarms are only
|
||||
** 8-bits wide, and compare against the 8 MSBs of the temperature. The bits
|
||||
** in the registers VT8231_REG_TEMP_LOW01 and VT8231_REG_TEMP_LOW25 are
|
||||
** ignored.
|
||||
*/
|
||||
/*
|
||||
* NB The values returned here are NOT temperatures. The calibration curves
|
||||
* for the thermistor curves are board-specific and must go in the
|
||||
* sensors.conf file. Temperature sensors are actually ten bits, but the
|
||||
* VIA datasheet only considers the 8 MSBs obtained from the regtemp[]
|
||||
* register. The temperature value returned should have a magnitude of 3,
|
||||
* so we use the VIA scaling as the "true" scaling and use the remaining 2
|
||||
* LSBs as fractional precision.
|
||||
*
|
||||
* All the on-chip hardware temperature comparisons for the alarms are only
|
||||
* 8-bits wide, and compare against the 8 MSBs of the temperature. The bits
|
||||
* in the registers VT8231_REG_TEMP_LOW01 and VT8231_REG_TEMP_LOW25 are
|
||||
* ignored.
|
||||
*/
|
||||
|
||||
/******** FAN RPM CONVERSIONS ********
|
||||
** This chip saturates back at 0, not at 255 like many the other chips.
|
||||
** So, 0 means 0 RPM
|
||||
*/
|
||||
/*
|
||||
****** FAN RPM CONVERSIONS ********
|
||||
* This chip saturates back at 0, not at 255 like many the other chips.
|
||||
* So, 0 means 0 RPM
|
||||
*/
|
||||
static inline u8 FAN_TO_REG(long rpm, int div)
|
||||
{
|
||||
if (rpm == 0)
|
||||
@ -463,9 +469,10 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
|
||||
return count;
|
||||
}
|
||||
|
||||
/* Note that these map the Linux temperature sensor numbering (1-6) to the VIA
|
||||
** temperature sensor numbering (0-5)
|
||||
*/
|
||||
/*
|
||||
* Note that these map the Linux temperature sensor numbering (1-6) to the VIA
|
||||
* temperature sensor numbering (0-5)
|
||||
*/
|
||||
#define define_temperature_sysfs(offset) \
|
||||
static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
|
||||
show_temp, NULL, offset - 1); \
|
||||
@ -1032,13 +1039,16 @@ static int __devinit vt8231_pci_probe(struct pci_dev *dev,
|
||||
if (vt8231_device_add(address))
|
||||
goto exit_unregister;
|
||||
|
||||
/* Always return failure here. This is to allow other drivers to bind
|
||||
/*
|
||||
* Always return failure here. This is to allow other drivers to bind
|
||||
* to this pci device. We don't really want to have control over the
|
||||
* pci device, we only wanted to read as few register values from it.
|
||||
*/
|
||||
|
||||
/* We do, however, mark ourselves as using the PCI device to stop it
|
||||
getting unloaded. */
|
||||
/*
|
||||
* We do, however, mark ourselves as using the PCI device to stop it
|
||||
* getting unloaded.
|
||||
*/
|
||||
s_bridge = pci_dev_get(dev);
|
||||
return -ENODEV;
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user