diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 777dc8a32df8..4f62fcbce108 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1787,6 +1787,11 @@ and is between 256 and 4096 characters. It is defined in the file waiting for the ACK, so if this is set too high interrupts *may* be lost! + omap_mux= [OMAP] Override bootloader pin multiplexing. + Format: ... + For example, to override I2C bus2: + omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100 + opl3= [HW,OSS] Format: diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig index 338267674075..1b39691b816f 100644 --- a/arch/arm/configs/htcherald_defconfig +++ b/arch/arm/configs/htcherald_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc6 -# Sat Nov 14 10:56:01 2009 +# Linux kernel version: 2.6.32-rc8 +# Sat Dec 5 12:16:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -198,7 +198,9 @@ CONFIG_ARCH_OMAP1=y # OMAP Feature Selections # # CONFIG_OMAP_RESET_CLOCKS is not set -# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set CONFIG_OMAP_MPU_TIMER=y @@ -207,6 +209,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set # CONFIG_OMAP_LL_DEBUG_NONE is not set +CONFIG_OMAP_SERIAL_WAKE=y # CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig new file mode 100644 index 000000000000..7c8515e65c02 --- /dev/null +++ b/arch/arm/configs/omap3_touchbook_defconfig @@ -0,0 +1,2431 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Fri Dec 4 16:02:17 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +CONFIG_MACH_OMAP3_TOUCHBOOK=y +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_IGEP0020 is not set +# CONFIG_MACH_OMAP_3630SDP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +# CONFIG_IPV6_PIMSM_V2 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_DEBUG=y +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +# CONFIG_BRIDGE_NF_EBTABLES is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +CONFIG_BT_HCIBTSDIO=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +CONFIG_BT_HCIBFUSB=y +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +# CONFIG_RXKAD is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +CONFIG_EEPROM_93CX6=y +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID6_PQ=m +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_QL is not set +# CONFIG_DM_MULTIPATH_ST is not set +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_EQUALIZER=m +CONFIG_TUN=m +CONFIG_VETH=m +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# WiMAX Wireless Broadband devices +# +# CONFIG_WIMAX_I2400M_USB is not set +# CONFIG_WIMAX_I2400M_SDIO is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_ATM_DRIVERS is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOATM is not set +CONFIG_PPPOL2TP=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +CONFIG_BATTERY_BQ27x00=y +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_TWL4030_CODEC is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_OXU210HP_HCD=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP210X is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +# CONFIG_USB_SERIAL_QUALCOMM is not set +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +# CONFIG_USB_SERIAL_SYMBOL is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_ATM is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ZERO_HNPTEST=y +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +CONFIG_USB_MIDI_GADGET=m +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_OTUS is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +# CONFIG_REISERFS_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS_SECURITY is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index a464ca332a23..2319113c86bf 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -1,26 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Tue Jun 9 12:36:23 2009 +# Linux kernel version: 2.6.32 +# Sun Dec 6 23:37:45 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_LOCKBREAK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -39,11 +42,12 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -52,8 +56,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED=y is not set -# CONFIG_SYSFS_DEPRECATED_V2=y is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -70,7 +73,6 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -83,6 +85,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -90,13 +96,16 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -110,7 +119,7 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -131,6 +140,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -142,8 +152,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -166,10 +178,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set # # TI OMAP Implementations @@ -190,9 +205,12 @@ CONFIG_ARCH_OMAP4=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y -CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set # CONFIG_OMAP_LL_DEBUG_UART2 is not set -# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y # # OMAP Board Type @@ -207,7 +225,7 @@ CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -222,9 +240,10 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_ARM_THUMB is not set # CONFIG_ARM_THUMBEE is not set # CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_DCACHE_DISABLE=y +# CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set @@ -245,18 +264,20 @@ CONFIG_ARM_GIC=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set -CONFIG_LOCAL_TIMERS=y -# CONFIG_PREEMPT is not set +# CONFIG_LOCAL_TIMERS is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -271,10 +292,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -# CONFIG_UNEVICTABLE_LRU is not set CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -298,9 +322,11 @@ CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600 # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y -# CONFIG_NEON is not set +CONFIG_NEON=y # # Userspace binary formats @@ -325,6 +351,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -342,6 +369,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -355,6 +383,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_PHONE is not set # # Input device support @@ -427,6 +456,11 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -447,11 +481,14 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -472,21 +509,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -511,14 +535,17 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -535,9 +562,12 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -601,7 +631,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # # Partition Types @@ -673,23 +702,24 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_DETECT_SOFTLOCKUP is not set CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -708,31 +738,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -754,7 +775,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -796,11 +816,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index eef93627fb13..4b00a4306812 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -610,7 +610,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index f0e7d0f85582..0d7e37a3651b 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -629,7 +629,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index ceced8ffe850..9ce17f13d3f1 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -18,6 +18,9 @@ obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + led-y := leds.o # Specific board support @@ -49,3 +52,7 @@ led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o obj-$(CONFIG_LEDS) += $(led-y) + +ifneq ($(CONFIG_FB_OMAP),) +obj-y += lcd_dma.o +endif diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index f4b72c1654f5..7e70c3c08da6 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -30,7 +31,6 @@ #include #include #include -#include #include #include #include @@ -100,6 +100,12 @@ static int fsample_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -167,8 +173,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define FSAMPLE_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -178,7 +216,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -190,6 +228,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -233,13 +274,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config fsample_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -250,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 89ba8ec4bbf4..fa7cecea19f9 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -40,7 +41,6 @@ #include #include #include -#include #include #include #include @@ -179,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data h2_nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = h2_nand_partitions, - .nr_parts = ARRAY_SIZE(h2_nand_partitions), +static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H2_NAND_RB_GPIO_PIN 62 + +static int h2_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H2_NAND_RB_GPIO_PIN); +} + +static const char *h2_part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data h2_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(h2_nand_partitions), + .partitions = h2_nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = h2_part_probes, + }, + .ctrl = { + .cmd_ctrl = h2_nand_cmd_ctl, + .dev_ready = h2_nand_dev_ready, + + }, }; static struct resource h2_nand_resource = { @@ -191,15 +223,21 @@ static struct resource h2_nand_resource = { }; static struct platform_device h2_nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &h2_nand_data, + .platform_data = &h2_nand_platdata, }, .num_resources = 1, .resource = &h2_nand_resource, }; +static struct smc91x_platdata h2_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource h2_smc91x_resources[] = { [0] = { .start = OMAP1610_ETHR_START, /* Physical */ @@ -216,6 +254,9 @@ static struct resource h2_smc91x_resources[] = { static struct platform_device h2_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &h2_smc91x_info, + }, .num_resources = ARRAY_SIZE(h2_smc91x_resources), .resource = h2_smc91x_resources, }; @@ -368,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { { OMAP_TAG_LCD, &h2_lcd_config }, }; -#define H2_NAND_RB_GPIO_PIN 62 - static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index f5cc0a730524..6a7f9c391cf1 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -42,7 +43,6 @@ #include #include #include -#include #include #include #include @@ -181,11 +181,43 @@ static struct mtd_partition nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = nand_partitions, - .nr_parts = ARRAY_SIZE(nand_partitions), +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H3_NAND_RB_GPIO_PIN 10 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H3_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(nand_partitions), + .partitions = nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + + }, }; static struct resource nand_resource = { @@ -193,15 +225,21 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &nand_data, + .platform_data = &nand_platdata, }, .num_resources = 1, .resource = &nand_resource, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = OMAP1710_ETHR_START, /* Physical */ @@ -218,6 +256,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -332,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -#define H3_NAND_RB_GPIO_PIN 10 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(H3_NAND_RB_GPIO_PIN); -} - static void __init h3_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped @@ -356,7 +390,7 @@ static void __init h3_init(void) nand_resource.end += SZ_4K - 1; if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 5f28a5ceacac..e36639f66150 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -39,6 +39,7 @@ #include #include #include +#include #include @@ -140,6 +141,15 @@ static struct platform_device kp_device = { .resource = kp_resources, }; +/* USB Device */ +static struct omap_usb_config htcherald_usb_config __initdata = { + .otg = 0, + .register_host = 0, + .register_dev = 1, + .hmc_mode = 4, + .pins[0] = 2, +}; + /* LCD Device resources */ static struct platform_device lcd_device = { .name = "lcd_htcherald", @@ -214,6 +224,57 @@ static void __init htcherald_disable_watchdog(void) } } +#define HTCHERALD_GPIO_USB_EN1 33 +#define HTCHERALD_GPIO_USB_EN2 73 +#define HTCHERALD_GPIO_USB_DM 35 +#define HTCHERALD_GPIO_USB_DP 36 + +static void __init htcherald_usb_enable(void) +{ + unsigned int tries = 20; + unsigned int value = 0; + + /* Request the GPIOs we need to control here */ + if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0) + goto err1; + + if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0) + goto err2; + + if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0) + goto err3; + + if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0) + goto err4; + + /* force USB_EN GPIO to 0 */ + do { + /* output low */ + gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0); + } while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 && + --tries); + + if (value == 1) + printk(KERN_WARNING "Unable to reset USB, trying to continue\n"); + + gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */ + gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */ + gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */ + + goto done; + +err4: + gpio_free(HTCHERALD_GPIO_USB_DM); +err3: + gpio_free(HTCHERALD_GPIO_USB_EN2); +err2: + gpio_free(HTCHERALD_GPIO_USB_EN1); +err1: + printk(KERN_ERR "Unabled to request GPIO for USB\n"); +done: + printk(KERN_INFO "USB setup complete.\n"); +} + static void __init htcherald_init(void) { printk(KERN_INFO "HTC Herald init.\n"); @@ -225,6 +286,9 @@ static void __init htcherald_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); + + htcherald_usb_enable(); + omap_usb_init(&htcherald_usb_config); } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cf0fdb9c182f..2133b006f6a3 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -142,6 +143,11 @@ static struct platform_device innovator_kp_device = { .resource = innovator_kp_resources, }; +static struct smc91x_platdata innovator_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; #ifdef CONFIG_ARCH_OMAP15XX @@ -175,6 +181,9 @@ static struct resource innovator1510_smc91x_resources[] = { static struct platform_device innovator1510_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources), .resource = innovator1510_smc91x_resources, }; @@ -241,6 +250,9 @@ static struct resource innovator1610_smc91x_resources[] = { static struct platform_device innovator1610_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources), .resource = innovator1610_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 50c92c13e48a..ccea4f448e9a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -115,6 +116,12 @@ static struct platform_device osk5912_flash_device = { .resource = &osk_flash_resource, }; +static struct smc91x_platdata osk5912_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource osk5912_smc91x_resources[] = { [0] = { .start = OMAP_OSK_ETHR_START, /* Physical */ @@ -131,6 +138,9 @@ static struct resource osk5912_smc91x_resources[] = { static struct platform_device osk5912_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &osk5912_smc91x_info, + }, .num_resources = ARRAY_SIZE(osk5912_smc91x_resources), .resource = osk5912_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ca7df1e93efc..1387a4f15da9 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -30,7 +31,6 @@ #include #include #include -#include #include #include #include @@ -67,6 +67,12 @@ static int p2_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -134,8 +140,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define P2_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(P2_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -145,7 +183,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -157,6 +195,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -201,13 +242,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -220,7 +254,7 @@ static void __init omap_perseus2_init(void) { if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 35c75c1bd0aa..169183537997 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -106,6 +107,12 @@ static struct platform_device voiceblue_flash_device = { .resource = &voiceblue_flash_resource, }; +static struct smc91x_platdata voiceblue_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource voiceblue_smc91x_resources[] = { [0] = { .start = OMAP_CS2_PHYS + 0x300, @@ -122,6 +129,9 @@ static struct resource voiceblue_smc91x_resources[] = { static struct platform_device voiceblue_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &voiceblue_smc91x_info, + }, .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), .resource = voiceblue_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index cf5f017b392c..ab995a9c606c 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -655,9 +655,9 @@ static struct omap_clk omap_clks[] = { CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), /* Virtual clocks */ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), - CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c new file mode 100644 index 000000000000..1bf4735e27a6 --- /dev/null +++ b/arch/arm/mach-omap1/i2c.c @@ -0,0 +1,39 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + if (cpu_is_omap7xx()) { + omap_cfg_reg(I2C_7XX_SDA); + omap_cfg_reg(I2C_7XX_SCL); + } else { + omap_cfg_reg(I2C_SDA); + omap_cfg_reg(I2C_SCL); + } + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h new file mode 100644 index 000000000000..d7a457bbcb7f --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-omap1/include/mach/lcd_dma.h + * + * Extracted from arch/arm/plat-omap/include/plat/dma.h + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_OMAP1_LCD_DMA_H__ +#define __MACH_OMAP1_LCD_DMA_H__ + +/* Hardware registers for LCD DMA */ +#define OMAP1510_DMA_LCD_BASE (0xfffedb00) +#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) +#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) +#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) +#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) +#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) + +#define OMAP1610_DMA_LCD_BASE (0xfffee300) +#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) +#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) +#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) +#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) +#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) +#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) +#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) +#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) +#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) +#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) +#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) +#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) +#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) +#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) +#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) +#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) +#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) + +/* LCD DMA block numbers */ +enum { + OMAP_LCD_DMA_B1_TOP, + OMAP_LCD_DMA_B1_BOTTOM, + OMAP_LCD_DMA_B2_TOP, + OMAP_LCD_DMA_B2_BOTTOM +}; + +/* LCD DMA functions */ +extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data); +extern void omap_free_lcd_dma(void); +extern void omap_setup_lcd_dma(void); +extern void omap_enable_lcd_dma(void); +extern void omap_stop_lcd_dma(void); +extern void omap_set_lcd_dma_ext_controller(int external); +extern void omap_set_lcd_dma_single_transfer(int single); +extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type); +extern void omap_set_lcd_dma_b1_rotation(int rotate); +extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); +extern void omap_set_lcd_dma_b1_mirror(int mirror); +extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); + +extern int omap_lcd_dma_running(void); + +#endif /* __MACH_OMAP1_LCD_DMA_H__ */ diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h new file mode 100644 index 000000000000..89bd703adaf6 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcdc.h @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-omap1/include/mach/lcdc.h + * + * Extracted from drivers/video/omap/lcdc.c + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __MACH_LCDC_H__ +#define __MACH_LCDC_H__ + +#define OMAP_LCDC_BASE 0xfffec000 +#define OMAP_LCDC_SIZE 256 +#define OMAP_LCDC_IRQ INT_LCD_CTRL + +#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00) +#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04) +#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08) +#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c) +#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10) +#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14) +#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18) +#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c) + +#define OMAP_LCDC_STAT_DONE (1 << 0) +#define OMAP_LCDC_STAT_VSYNC (1 << 1) +#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2) +#define OMAP_LCDC_STAT_ABC (1 << 3) +#define OMAP_LCDC_STAT_LINE_INT (1 << 4) +#define OMAP_LCDC_STAT_FUF (1 << 5) +#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6) + +#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) +#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7) +#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10) + +#define OMAP_LCDC_IRQ_VSYNC (1 << 2) +#define OMAP_LCDC_IRQ_DONE (1 << 3) +#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4) +#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5) +#define OMAP_LCDC_IRQ_LINE (1 << 6) +#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2) + +#endif /* __MACH_LCDC_H__ */ diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c new file mode 100644 index 000000000000..3be11af687bb --- /dev/null +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -0,0 +1,448 @@ +/* + * linux/arch/arm/mach-omap1/lcd_dma.c + * + * Extracted from arch/arm/plat-omap/dma.c + * Copyright (C) 2003 - 2008 Nokia Corporation + * Author: Juha Yrjölä + * DMA channel linking for 1610 by Samuel Ortiz + * Graphics DMA and LCD DMA graphics tranformations + * by Imre Deak + * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. + * Merged to support both OMAP1 and OMAP2 by Tony Lindgren + * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar + * + * Support functions for the OMAP internal DMA channels. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +int omap_lcd_dma_running(void) +{ + /* + * On OMAP1510, internal LCD controller will start the transfer + * when it gets enabled, so assume DMA running if LCD enabled. + */ + if (cpu_is_omap1510()) + if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) + return 1; + + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; + + return 0; +} + +static struct lcd_dma_info { + spinlock_t lock; + int reserved; + void (*callback)(u16 status, void *data); + void *cb_data; + + int active; + unsigned long addr, size; + int rotate, data_type, xres, yres; + int vxres; + int mirror; + int xscale, yscale; + int ext_ctrl; + int src_port; + int single_transfer; +} lcd_dma; + +void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type) +{ + lcd_dma.addr = addr; + lcd_dma.data_type = data_type; + lcd_dma.xres = fb_xres; + lcd_dma.yres = fb_yres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1); + +void omap_set_lcd_dma_src_port(int port) +{ + lcd_dma.src_port = port; +} + +void omap_set_lcd_dma_ext_controller(int external) +{ + lcd_dma.ext_ctrl = external; +} +EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); + +void omap_set_lcd_dma_single_transfer(int single) +{ + lcd_dma.single_transfer = single; +} +EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); + +void omap_set_lcd_dma_b1_rotation(int rotate) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); + BUG(); + return; + } + lcd_dma.rotate = rotate; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); + +void omap_set_lcd_dma_b1_mirror(int mirror) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.mirror = mirror; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); + +void omap_set_lcd_dma_b1_vxres(unsigned long vxres) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA virtual resulotion is not supported " + "in 1510 mode\n"); + BUG(); + } + lcd_dma.vxres = vxres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); + +void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.xscale = xscale; + lcd_dma.yscale = yscale; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); + +static void set_b1_regs(void) +{ + unsigned long top, bottom; + int es; + u16 w; + unsigned long en, fn; + long ei, fi; + unsigned long vxres; + unsigned int xscale, yscale; + + switch (lcd_dma.data_type) { + case OMAP_DMA_DATA_TYPE_S8: + es = 1; + break; + case OMAP_DMA_DATA_TYPE_S16: + es = 2; + break; + case OMAP_DMA_DATA_TYPE_S32: + es = 4; + break; + default: + BUG(); + return; + } + + vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; + xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; + yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; + BUG_ON(vxres < lcd_dma.xres); + +#define PIXADDR(x, y) (lcd_dma.addr + \ + ((y) * vxres * yscale + (x) * xscale) * es) +#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) + + switch (lcd_dma.rotate) { + case 0: + if (!lcd_dma.mirror) { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + /* 1510 DMA requires the bottom address to be 2 more + * than the actual last memory access location. */ + if (cpu_is_omap1510() && + lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) + bottom += 2; + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 90: + if (!lcd_dma.mirror) { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + case 180: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); + } else { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 270: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); + } else { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + default: + BUG(); + return; /* Suppress warning about uninitialized vars */ + } + + if (cpu_is_omap1510()) { + omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); + omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); + omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); + omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); + + return; + } + + /* 1610 regs */ + omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); + omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); + omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); + omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); + + omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); + omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); + + w = omap_readw(OMAP1610_DMA_LCD_CSDP); + w &= ~0x03; + w |= lcd_dma.data_type; + omap_writew(w, OMAP1610_DMA_LCD_CSDP); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + /* Always set the source port as SDRAM for now*/ + w &= ~(0x03 << 6); + if (lcd_dma.callback != NULL) + w |= 1 << 1; /* Block interrupt enable */ + else + w &= ~(1 << 1); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + if (!(lcd_dma.rotate || lcd_dma.mirror || + lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* Set the double-indexed addressing mode */ + w |= (0x03 << 12); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); + omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); + omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); +} + +static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) +{ + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + if (unlikely(!(w & (1 << 3)))) { + printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); + return IRQ_NONE; + } + /* Ack the IRQ */ + w |= (1 << 3); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + lcd_dma.active = 0; + if (lcd_dma.callback != NULL) + lcd_dma.callback(w, lcd_dma.cb_data); + + return IRQ_HANDLED; +} + +int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data) +{ + spin_lock_irq(&lcd_dma.lock); + if (lcd_dma.reserved) { + spin_unlock_irq(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA channel already reserved\n"); + BUG(); + return -EBUSY; + } + lcd_dma.reserved = 1; + spin_unlock_irq(&lcd_dma.lock); + lcd_dma.callback = callback; + lcd_dma.cb_data = data; + lcd_dma.active = 0; + lcd_dma.single_transfer = 0; + lcd_dma.rotate = 0; + lcd_dma.vxres = 0; + lcd_dma.mirror = 0; + lcd_dma.xscale = 0; + lcd_dma.yscale = 0; + lcd_dma.ext_ctrl = 0; + lcd_dma.src_port = 0; + + return 0; +} +EXPORT_SYMBOL(omap_request_lcd_dma); + +void omap_free_lcd_dma(void) +{ + spin_lock(&lcd_dma.lock); + if (!lcd_dma.reserved) { + spin_unlock(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA is not reserved\n"); + BUG(); + return; + } + if (!cpu_is_omap1510()) + omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, + OMAP1610_DMA_LCD_CCR); + lcd_dma.reserved = 0; + spin_unlock(&lcd_dma.lock); +} +EXPORT_SYMBOL(omap_free_lcd_dma); + +void omap_enable_lcd_dma(void) +{ + u16 w; + + /* + * Set the Enable bit only if an external controller is + * connected. Otherwise the OMAP internal controller will + * start the transfer when it gets enabled. + */ + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w |= 1 << 8; + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + lcd_dma.active = 1; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w |= 1 << 7; + omap_writew(w, OMAP1610_DMA_LCD_CCR); +} +EXPORT_SYMBOL(omap_enable_lcd_dma); + +void omap_setup_lcd_dma(void) +{ + BUG_ON(lcd_dma.active); + if (!cpu_is_omap1510()) { + /* Set some reasonable defaults */ + omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); + omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); + omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); + } + set_b1_regs(); + if (!cpu_is_omap1510()) { + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* + * If DMA was already active set the end_prog bit to have + * the programmed register set loaded into the active + * register set. + */ + w |= 1 << 11; /* End_prog */ + if (!lcd_dma.single_transfer) + w |= (3 << 8); /* Auto_init, repeat */ + omap_writew(w, OMAP1610_DMA_LCD_CCR); + } +} +EXPORT_SYMBOL(omap_setup_lcd_dma); + +void omap_stop_lcd_dma(void) +{ + u16 w; + + lcd_dma.active = 0; + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w &= ~(1 << 7); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); +} +EXPORT_SYMBOL(omap_stop_lcd_dma); + +static int __init omap_init_lcd_dma(void) +{ + int r; + + if (cpu_is_omap16xx()) { + u16 w; + + /* this would prevent OMAP sleep */ + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + } + + spin_lock_init(&lcd_dma.lock); + + r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, + "LCD DMA", NULL); + if (r != 0) + printk(KERN_ERR "unable to request IRQ for LCD DMA " + "(error %d)\n", r); + + return r; +} + +arch_initcall(omap_init_lcd_dma); + diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 785371e982fc..07212cc621ae 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -50,12 +50,18 @@ MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 6, 28, 1, 0) +MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3, 3, 1, 2, 0, 0) +MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0) /* MMC Pins */ MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0) MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) + +/* I2C interface */ +MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) +MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0cd25ceadb43..76c11ee113e9 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -24,6 +24,18 @@ config ARCH_OMAP3430 depends on ARCH_OMAP3 && ARCH_OMAP34XX select ARCH_OMAP_OTG +config OMAP_PACKAGE_CBC + bool + +config OMAP_PACKAGE_CBB + bool + +config OMAP_PACKAGE_CUS + bool + +config OMAP_PACKAGE_CBP + bool + comment "OMAP Board Type" depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 @@ -52,14 +64,17 @@ config MACH_OMAP_2430SDP config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3EVM bool "OMAP 3530 EVM board" @@ -68,14 +83,22 @@ config MACH_OMAP3EVM config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB + +config MACH_OMAP3_TOUCHBOOK + bool "OMAP3 Touch Book" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_NOKIA_N800 bool @@ -96,26 +119,33 @@ config MACH_NOKIA_N8X0 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM2 bool "OMAP3 Zoom2 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_CM_T35 bool "CompuLab CM-T35 module" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CUS + select OMAP_MUX config MACH_IGEP0020 bool "IGEP0020" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_3630SDP bool "OMAP3630 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 10c0539c4b01..b32678b848bc 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -26,6 +26,9 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o +# Pin multiplexing +obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o + # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o @@ -61,6 +64,9 @@ iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o @@ -99,7 +105,8 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ mmc-twl4030.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ mmc-twl4030.o - +obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5bda9fdbee9e..4cfb7b68dfad 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -31,7 +31,6 @@ #include #include -#include #include #include #include @@ -42,6 +41,7 @@ #include #include +#include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" @@ -625,7 +625,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -640,8 +642,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_3430sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3430_i2c_init(); platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); if (omap_rev() > OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 348b70b98336..739059632811 100755 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -23,6 +23,7 @@ #include +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) @@ -48,7 +49,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -82,8 +85,17 @@ static void __init omap_sdp_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); board_smc91x_init(); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 415a13d767cc..b4e6eca0e8a9 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -30,6 +30,8 @@ #include #include +#include "mux.h" + /* * Board initialization */ @@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init am3517_evm_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 8a2ce77a02ec..fbbd68d69cc8 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -120,6 +121,12 @@ static void __init apollon_flash_init(void) apollon_flash_resource[0].end = base + SZ_128K - 1; } +static struct smc91x_platdata appolon_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource apollon_smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -134,6 +141,9 @@ static struct resource apollon_smc91x_resources[] = { static struct platform_device apollon_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &appolon_smc91x_info, + }, .num_resources = ARRAY_SIZE(apollon_smc91x_resources), .resource = apollon_smc91x_resources, }; diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 22c45290db63..1591aae64500 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -38,13 +38,13 @@ #include #include -#include #include #include #include #include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -482,8 +482,102 @@ static void __init cm_t35_map_io(void) omap2_map_common_io(); } +static struct omap_board_mux board_mux[] __initdata = { + /* nCS and IRQ for CM-T35 ethernet */ + OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), + OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* nCS and IRQ for SB-T35 ethernet */ + OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), + OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* PENDOWN GPIO */ + OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* MMC 2 */ + OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + + /* McSPI 1 */ + OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + + /* McSPI 4 */ + OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), + + /* McBSP 2 */ + OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* serial ports */ + OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* DSS */ + OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* TPS IRQ */ + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ + OMAP_PIN_INPUT_PULLUP), + + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + static void __init cm_t35_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); @@ -492,8 +586,6 @@ static void __init cm_t35_init(void) cm_t35_init_led(); usb_musb_init(); - - omap_cfg_reg(AF26_34XX_SYS_NIRQ); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fa62e80c13b7..44239e3ec02e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -27,9 +27,9 @@ #include #include #include -#include #include +#include "mux.h" #include "mmc-twl4030.h" #define IGEP2_SMSC911X_CS 5 @@ -203,8 +203,17 @@ static int __init igep2_i2c_init(void) return 0; } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init igep2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); igep2_i2c_init(); omap_serial_init(); usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c062238fe881..37431738f1c2 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -43,6 +43,7 @@ #include #include +#include "mux.h" #include "mmc-twl4030.h" #define LDP_SMSC911X_CS 1 @@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_ldp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); ts_gpio = 54; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 41480bd0e58a..6ada8029f9a8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -41,10 +41,10 @@ #include #include #include -#include #include #include +#include "mux.h" #include "mmc-twl4030.h" #define GPMC_CS0_BASE 0x60 @@ -140,10 +140,10 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_cfg_reg(AG9_34XX_GPIO23); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_wp = 23; } else { - omap_cfg_reg(AH8_34XX_GPIO29); + omap_mux_init_gpio(29, OMAP_PIN_INPUT); } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -422,14 +422,23 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_beagle_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_serial_init(); - omap_cfg_reg(J25_34XX_GPIO170); + omap_mux_init_gpio(170, OMAP_PIN_INPUT); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); @@ -439,8 +448,8 @@ static void __init omap3_beagle_init(void) omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5efc2e9068db..18913e96e34d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -38,11 +38,11 @@ #include #include -#include #include #include #include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -223,7 +223,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_cfg_reg(L8_34XX_GPIO63); + omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); @@ -422,9 +422,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_evm_i2c_init(); @@ -440,24 +449,24 @@ static void __init omap3_evm_init(void) #endif if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_cfg_reg(AF9_34XX_GPIO22); + omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); /* Select EHCI port on main board */ - omap_cfg_reg(U3_34XX_GPIO61); + omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); /* setup EHCI phy reset config */ - omap_cfg_reg(AH14_34XX_GPIO21); + omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); ehci_pdata.reset_gpio_port[1] = 21; } else { /* setup EHCI phy reset on MDC */ - omap_cfg_reg(AF4_34XX_GPIO135_OUT); + omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); ehci_pdata.reset_gpio_port[1] = 135; } usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2db5ba5b3bf7..6f6c601eeab7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,8 +40,8 @@ #include #include #include -#include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -98,10 +98,10 @@ static struct gpio_keys_button pandora_gpio_keys[] = { GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), - GPIO_BUTTON_LOW(111, BTN_A, "a"), - GPIO_BUTTON_LOW(106, BTN_B, "b"), - GPIO_BUTTON_LOW(109, BTN_X, "x"), - GPIO_BUTTON_LOW(101, BTN_Y, "y"), + GPIO_BUTTON_LOW(109, KEY_KP1, "game 1"), + GPIO_BUTTON_LOW(111, KEY_KP2, "game 2"), + GPIO_BUTTON_LOW(106, KEY_KP3, "game 3"), + GPIO_BUTTON_LOW(101, KEY_KP4, "game 4"), GPIO_BUTTON_LOW(102, BTN_TL, "l"), GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), GPIO_BUTTON_LOW(105, BTN_TR, "r"), @@ -315,7 +315,7 @@ static int __init omap3pandora_i2c_init(void) omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, ARRAY_SIZE(omap3pandora_i2c_boardinfo)); /* i2c2 pins are not connected */ - omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } @@ -368,23 +368,8 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { } }; -static struct platform_device omap3pandora_lcd_device = { - .name = "pandora_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3pandora_lcd_config __initdata = { - .ctrl_name = "internal", -}; - -static struct omap_board_config_kernel omap3pandora_config[] __initdata = { - { OMAP_TAG_LCD, &omap3pandora_lcd_config }, -}; - static void __init omap3pandora_init_irq(void) { - omap_board_config = omap3pandora_config; - omap_board_config_size = ARRAY_SIZE(omap3pandora_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); @@ -392,7 +377,6 @@ static void __init omap3pandora_init_irq(void) } static struct platform_device *omap3pandora_devices[] __initdata = { - &omap3pandora_lcd_device, &pandora_leds_gpio, &pandora_keys_gpio, }; @@ -409,8 +393,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3pandora_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3pandora_i2c_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); @@ -423,8 +416,8 @@ static void __init omap3pandora_init(void) usb_musb_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c new file mode 100644 index 000000000000..c9e5ebb4d91d --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -0,0 +1,572 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3touchbook.c + * + * Copyright (C) 2009 Always Innovating + * + * Modified from mach-omap2/board-omap3beagleboard.c + * + * Initial code: Grégoire Gentil, Tim Yamin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "mux.h" +#include "mmc-twl4030.h" + +#include + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +#define OMAP3_AC_GPIO 136 +#define OMAP3_TS_GPIO 162 +#define TB_BL_PWM_TIMER 9 +#define TB_KILL_POWER_GPIO 168 + +unsigned long touchbook_revision; + +static struct mtd_partition omap3touchbook_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data omap3touchbook_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = omap3touchbook_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .nand_setup = NULL, + .dev_ready = NULL, +}; + +static struct resource omap3touchbook_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3touchbook_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &omap3touchbook_nand_data, + }, + .num_resources = 1, + .resource = &omap3touchbook_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_wp = 29, + }, + {} /* Terminator */ +}; + +static struct platform_device omap3_touchbook_lcd_device = { + .name = "omap3touchbook_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct regulator_consumer_supply touchbook_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply touchbook_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct gpio_led gpio_leds[]; + +static int touchbook_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + if (system_rev >= 0x20 && system_rev <= 0x34301000) { + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + mmc[0].gpio_wp = 23; + } else { + omap_mux_init_gpio(29, OMAP_PIN_INPUT); + } + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters */ + touchbook_vmmc1_supply.dev = mmc[0].dev; + touchbook_vsim_supply.dev = mmc[0].dev; + + /* REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + + gpio_request(gpio + 1, "EHCI_nOC"); + gpio_direction_input(gpio + 1); + + /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ + gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + return 0; +} + +static struct twl4030_gpio_platform_data touchbook_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + | BIT(15) | BIT(16) | BIT(17), + .setup = touchbook_twl_gpio_setup, +}; + +static struct regulator_consumer_supply touchbook_vdac_supply = { + .supply = "vdac", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +static struct regulator_consumer_supply touchbook_vdvi_supply = { + .supply = "vdvi", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data touchbook_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data touchbook_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data touchbook_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data touchbook_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdvi_supply, +}; + +static struct twl4030_usb_data touchbook_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_codec_audio_data touchbook_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data touchbook_codec_data = { + .audio_mclk = 26000000, + .audio = &touchbook_audio_data, +}; + +static struct twl4030_platform_data touchbook_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &touchbook_usb_data, + .gpio = &touchbook_gpio_data, + .codec = &touchbook_codec_data, + .vmmc1 = &touchbook_vmmc1, + .vsim = &touchbook_vsim, + .vdac = &touchbook_vdac, + .vpll2 = &touchbook_vpll2, +}; + +static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &touchbook_twldata, + }, +}; + +static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("bq27200", 0x55), + }, +}; + +static int __init omap3_touchbook_i2c_init(void) +{ + /* Standard TouchBook bus */ + omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, + ARRAY_SIZE(touchbook_i2c_boardinfo)); + + /* Additional TouchBook bus */ + omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, + ARRAY_SIZE(touchBook_i2c_boardinfo)); + + return 0; +} + +static void __init omap3_ads7846_init(void) +{ + if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { + printk(KERN_ERR "Failed to request GPIO %d for " + "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); + return; + } + + gpio_direction_input(OMAP3_TS_GPIO); + omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); +} + +static struct ads7846_platform_data ads7846_config = { + .x_min = 100, + .y_min = 265, + .x_max = 3950, + .y_max = 3750, + .x_plate_ohms = 40, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 5, + .debounce_rep = 1, + .gpio_pendown = OMAP3_TS_GPIO, + .keep_vref_on = 1, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 4, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), + .platform_data = &ads7846_config, + } +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "touchbook::usr0", + .default_trigger = "heartbeat", + .gpio = 150, + }, + { + .name = "touchbook::usr1", + .default_trigger = "mmc0", + .gpio = 149, + }, + { + .name = "touchbook::pmu_stat", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 7, + .desc = "user", + .wakeup = 1, + }, + { + .code = KEY_POWER, + .gpio = 183, + .desc = "power", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = { + { OMAP_TAG_LCD, &omap3_touchbook_lcd_config }, +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init omap3_touchbook_init_irq(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = omap3_touchbook_config; + omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif + omap_gpio_init(); +} + +static struct platform_device *omap3_touchbook_devices[] __initdata = { + &omap3_touchbook_lcd_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3touchbook_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + omap3touchbook_nand_data.cs = nandcs; + omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + omap3touchbook_nand_data.gpmc_baseaddr = + (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&omap3touchbook_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 147, + .reset_gpio_port[2] = -EINVAL +}; + +static void omap3_touchbook_poweroff(void) +{ + int r; + + r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); + if (r < 0) { + printk(KERN_ERR "Unable to get kill power GPIO\n"); + return; + } + + gpio_direction_output(TB_KILL_POWER_GPIO, 0); +} + +static void __init early_touchbook_revision(char **p) +{ + if (!*p) + return; + + strict_strtoul(*p, 10, &touchbook_revision); +} +__early_param("tbr=", early_touchbook_revision); + +static void __init omap3_touchbook_init(void) +{ + pm_power_off = omap3_touchbook_poweroff; + + omap3_touchbook_i2c_init(); + platform_add_devices(omap3_touchbook_devices, + ARRAY_SIZE(omap3_touchbook_devices)); + omap_serial_init(); + + omap_mux_init_gpio(170, OMAP_PIN_INPUT); + gpio_request(176, "DVI_nPD"); + /* REVISIT leave DVI powered down until it's needed ... */ + gpio_direction_output(176, true); + + /* Touchscreen and accelerometer */ + spi_register_board_info(omap3_ads7846_spi_board_info, + ARRAY_SIZE(omap3_ads7846_spi_board_info)); + omap3_ads7846_init(); + usb_musb_init(); + usb_ehci_init(&ehci_pdata); + omap3touchbook_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); +} + +static void __init omap3_touchbook_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") + /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_touchbook_map_io, + .init_irq = omap3_touchbook_init_irq, + .init_machine = omap3_touchbook_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52dfd51a938e..5b78a87217e0 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -44,9 +44,9 @@ #include #include #include -#include #include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -405,9 +405,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif static void __init overo_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); @@ -418,8 +426,8 @@ static void __init overo_init(void) overo_init_smsc911x(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 15ce6514c5fd..bf26ad31f9ba 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -33,6 +33,7 @@ #include #include +#include "mux.h" #include "mmc-twl4030.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 @@ -59,7 +60,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .bus_num = 4, .chip_select = 0, .max_speed_hz = 48000000, - .mode = SPI_MODE_2, + .mode = SPI_MODE_3, .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, }, @@ -630,9 +631,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = { static void __init board_smc91x_init(void) { - omap_cfg_reg(U8_34XX_GPIO54_DOWN); - omap_cfg_reg(G25_34XX_GPIO86_OUT); - omap_cfg_reg(H19_34XX_GPIO164_OUT); + omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); gpmc_smc91x_init(&board_smc91x_data); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1bb1de245917..67bb3476b707 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -23,13 +23,14 @@ #include #include -#include #include #include #include #include #include +#include "mux.h" + struct omap_sdrc_params *rx51_get_sdram_timings(void); static struct omap_lcd_config rx51_lcd_config = { @@ -69,15 +70,24 @@ static void __init rx51_init_irq(void) extern void __init rx51_peripherals_init(void); +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init rx51_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index f14baa392760..258794db488f 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -152,14 +152,20 @@ static struct regulator_init_data zoom_vsim = { static struct twl4030_hsmmc_info mmc[] __initdata = { { + .name = "external", .mmc = 1, .wires = 4, .gpio_wp = -EINVAL, + .power_saving = true, }, { + .name = "internal", .mmc = 2, - .wires = 4, + .wires = 8, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .nonremovable = true, + .power_saving = true, }, {} /* Terminator */ }; @@ -167,11 +173,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - /* gpio + 0 is "mmc0_cd" (input/IRQ), - * gpio + 1 is "mmc1_cd" (input/IRQ) - */ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(mmc); /* link regulators to MMC adapters ... we "know" the @@ -236,6 +239,7 @@ static struct twl4030_platform_data zoom_twldata = { .gpio = &zoom_gpio_data, .keypad = &zoom_kp_twl4030_data, .codec = &zoom_codec_data, + .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index d94d047c7dce..bb87cf7878ff 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -23,6 +23,7 @@ #include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" static void __init omap_zoom2_init_irq(void) @@ -68,8 +69,17 @@ static struct twl4030_platform_data zoom2_twldata = { #endif +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); zoom_peripherals_init(); zoom_debugboard_init(); } diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 8d965a6516c8..a9fe9181b010 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -21,6 +21,7 @@ #include #include +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" static void __init omap_zoom_map_io(void) @@ -42,8 +43,17 @@ static void __init omap_zoom_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); zoom_debugboard_init(); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 733d3dcff98b..18ad93160abb 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -27,6 +27,8 @@ #include #include +#include "mux.h" + #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) static struct resource cam_resources[] = { @@ -595,27 +597,40 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, if (cpu_is_omap34xx()) { if (controller_nr == 0) { - omap_cfg_reg(N28_3430_MMC1_CLK); - omap_cfg_reg(M27_3430_MMC1_CMD); - omap_cfg_reg(N27_3430_MMC1_DAT0); + omap_mux_init_signal("sdmmc1_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat0", + OMAP_PIN_INPUT_PULLUP); if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(N26_3430_MMC1_DAT1); - omap_cfg_reg(N25_3430_MMC1_DAT2); - omap_cfg_reg(P28_3430_MMC1_DAT3); + omap_mux_init_signal("sdmmc1_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(P27_3430_MMC1_DAT4); - omap_cfg_reg(P26_3430_MMC1_DAT5); - omap_cfg_reg(R27_3430_MMC1_DAT6); - omap_cfg_reg(R25_3430_MMC1_DAT7); + omap_mux_init_signal("sdmmc1_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat7", + OMAP_PIN_INPUT_PULLUP); } } if (controller_nr == 1) { /* MMC2 */ - omap_cfg_reg(AE2_3430_MMC2_CLK); - omap_cfg_reg(AG5_3430_MMC2_CMD); - omap_cfg_reg(AH5_3430_MMC2_DAT0); + omap_mux_init_signal("sdmmc2_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat0", + OMAP_PIN_INPUT_PULLUP); /* * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed @@ -623,15 +638,22 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, */ if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AH4_3430_MMC2_DAT1); - omap_cfg_reg(AG4_3430_MMC2_DAT2); - omap_cfg_reg(AF4_3430_MMC2_DAT3); + omap_mux_init_signal("sdmmc2_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AE4_3430_MMC2_DAT4); - omap_cfg_reg(AH3_3430_MMC2_DAT5); - omap_cfg_reg(AF3_3430_MMC2_DAT6); - omap_cfg_reg(AE3_3430_MMC2_DAT7); + omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", + OMAP_PIN_INPUT_PULLUP); } } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 6083e21b3be6..877c6f5807b7 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -33,17 +33,19 @@ static struct resource gpmc_smc91x_resources[] = { }; static struct smc91x_platdata gpmc_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, }; static struct platform_device gpmc_smc91x_device = { .name = "smc91x", .id = -1, - .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), - .resource = gpmc_smc91x_resources, .dev = { .platform_data = &gpmc_smc91x_info, }, + .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), + .resource = gpmc_smc91x_resources, }; /* diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c new file mode 100644 index 000000000000..789ca8c02f0c --- /dev/null +++ b/arch/arm/mach-omap2/i2c.c @@ -0,0 +1,56 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include + +#include "mux.h" + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + if (cpu_is_omap24xx()) { + const int omap24xx_pins[][2] = { + { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, + { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, + }; + int scl, sda; + + scl = omap24xx_pins[bus_id - 1][0]; + sda = omap24xx_pins[bus_id - 1][1]; + omap_cfg_reg(sda); + omap_cfg_reg(scl); + } + + /* First I2C bus is not muxable */ + if (cpu_is_omap34xx() && bus_id > 1) { + char mux_name[sizeof("i2c2_scl.i2c2_scl")]; + + sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + } + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index f48a4b2654dd..a091b53657b9 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -246,6 +246,31 @@ void __init omap3_check_revision(void) } } +void __init omap4_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + char *rev_name = "ES1.0"; + + /* + * The IC rev detection is done with hawkeye and rev. + * Note that rev does not map directly to defined processor + * revision numbers as ES1.0 uses value 0. + */ + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + + if ((hawkeye == 0xb852) && (rev == 0x0)) { + omap_revision = OMAP4430_REV_ES1_0; + pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); + return; + } + + pr_err("Unknown OMAP4 CPU id\n"); +} + #define OMAP3_SHOW_FEATURE(feat) \ if (omap3_has_ ##feat()) \ printk(#feat" "); @@ -277,10 +302,10 @@ void __init omap3_cpuinfo(void) } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ strcpy(cpu_name, "OMAP3430/3530"); - } else if (omap3_has_sgx()) { + } else if (omap3_has_iva()) { omap_revision = OMAP3525_REV(rev); strcpy(cpu_name, "OMAP3525"); - } else if (omap3_has_iva()) { + } else if (omap3_has_sgx()) { omap_revision = OMAP3515_REV(rev); strcpy(cpu_name, "OMAP3515"); } else { @@ -336,7 +361,7 @@ void __init omap2_check_revision(void) omap3_check_features(); omap3_cpuinfo(); } else if (cpu_is_omap44xx()) { - printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); + omap4_check_revision(); return; } else { pr_err("OMAP revision unknown, please fix!\n"); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index ac9ea6007f27..a8749e8017b9 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include "clock.h" diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c18a94eca641..e071b3fd1878 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -27,19 +27,52 @@ #include #include #include +#include +#include +#include +#include +#include #include #include #include -#ifdef CONFIG_OMAP_MUX +#include "mux.h" + +#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ +#define OMAP_MUX_BASE_SZ 0x5ca + +struct omap_mux_entry { + struct omap_mux mux; + struct list_head node; +}; + +static unsigned long mux_phys; +static void __iomem *mux_base; + +static inline u16 omap_mux_read(u16 reg) +{ + if (cpu_is_omap24xx()) + return __raw_readb(mux_base + reg); + else + return __raw_readw(mux_base + reg); +} + +static inline void omap_mux_write(u16 val, u16 reg) +{ + if (cpu_is_omap24xx()) + __raw_writeb(val, mux_base + reg); + else + __raw_writew(val, mux_base + reg); +} + +#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX) static struct omap_mux_cfg arch_mux_cfg; /* NOTE: See mux.h for the enumeration */ -#ifdef CONFIG_ARCH_OMAP24XX static struct pin_config __initdata_or_module omap24xx_pins[] = { /* * description mux mux pull pull debug @@ -249,342 +282,14 @@ MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1) #define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins) -#else -#define omap24xx_pins NULL -#define OMAP24XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP24XX */ - -#ifdef CONFIG_ARCH_OMAP34XX -static struct pin_config __initdata_or_module omap34xx_pins[] = { -/* - * Name, reg-offset, - * mux-mode | [active-mode | off-mode] - */ - -/* 34xx I2C */ -MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 3*/ -MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ -MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) - - -/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix. - * (Always specify PIN_INPUT, except for names suffixed by "_OUT".) - * No internal pullup/pulldown without "_UP" or "_DOWN" suffix. - */ -MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) - -/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ -MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) - -/* MMC1 */ -MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC2 */ -MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE4_3430_MMC2_DAT4", 0x164, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH3_3430_MMC2_DAT5", 0x166, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC3 */ -MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) - -/* SYS_NIRQ T2 INT1 */ -MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0, - OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP | - OMAP34XX_MUX_MODE0) -/* EHCI GPIO's on OMAP3EVM (Rev >= E) */ -MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -}; - -#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) - -#else -#define omap34xx_pins NULL -#define OMAP34XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP34XX */ - #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg) { u16 orig; u8 warn = 0, debug = 0; - if (cpu_is_omap24xx()) - orig = omap_ctrl_readb(cfg->mux_reg); - else - orig = omap_ctrl_readw(cfg->mux_reg); + orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET); #ifdef CONFIG_OMAP_MUX_DEBUG debug = cfg->debug; @@ -600,7 +305,6 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r #define omap2_cfg_debug(x, y) do {} while (0) #endif -#ifdef CONFIG_ARCH_OMAP24XX static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) { static DEFINE_SPINLOCK(mux_spin_lock); @@ -614,47 +318,692 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) if (cfg->pu_pd_val) reg |= OMAP2_PULL_UP; omap2_cfg_debug(cfg, reg); - omap_ctrl_writeb(reg, cfg->mux_reg); + omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET); spin_unlock_irqrestore(&mux_spin_lock, flags); return 0; } -#else -#define omap24xx_cfg_reg NULL -#endif - -#ifdef CONFIG_ARCH_OMAP34XX -static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg) -{ - static DEFINE_SPINLOCK(mux_spin_lock); - unsigned long flags; - u16 reg = 0; - - spin_lock_irqsave(&mux_spin_lock, flags); - reg |= cfg->mux_val; - omap2_cfg_debug(cfg, reg); - omap_ctrl_writew(reg, cfg->mux_reg); - spin_unlock_irqrestore(&mux_spin_lock, flags); - - return 0; -} -#else -#define omap34xx_cfg_reg NULL -#endif int __init omap2_mux_init(void) { + u32 mux_pbase; + + if (cpu_is_omap2420()) + mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else if (cpu_is_omap2430()) + mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else + return -ENODEV; + + mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + if (cpu_is_omap24xx()) { arch_mux_cfg.pins = omap24xx_pins; arch_mux_cfg.size = OMAP24XX_PINS_SZ; arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; - } else if (cpu_is_omap34xx()) { - arch_mux_cfg.pins = omap34xx_pins; - arch_mux_cfg.size = OMAP34XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap34xx_cfg_reg; + + return omap_mux_register(&arch_mux_cfg); } - return omap_mux_register(&arch_mux_cfg); + return 0; } +#else +int __init omap2_mux_init(void) +{ + return 0; +} +#endif /* CONFIG_OMAP_MUX */ + +/*----------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_OMAP34XX +static LIST_HEAD(muxmodes); +static DEFINE_MUTEX(muxmode_mutex); + +#ifdef CONFIG_OMAP_MUX + +static char *omap_mux_options; + +int __init omap_mux_init_gpio(int gpio, int val) +{ + struct omap_mux_entry *e; + int found = 0; + + if (!gpio) + return -EINVAL; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (gpio == m->gpio) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); + mux_mode |= OMAP_MUX_MODE4; + printk(KERN_DEBUG "mux: Setting signal " + "%s.gpio%i 0x%04x -> 0x%04x\n", + m->muxnames[0], gpio, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } + + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + + return -ENODEV; +} + +int __init omap_mux_init_signal(char *muxname, int val) +{ + struct omap_mux_entry *e; + char *m0_name = NULL, *mode_name = NULL; + int found = 0; + + mode_name = strchr(muxname, '.'); + if (mode_name) { + *mode_name = '\0'; + mode_name++; + m0_name = muxname; + } else { + mode_name = muxname; + } + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char *m0_entry = m->muxnames[0]; + int i; + + if (m0_name && strcmp(m0_name, m0_entry)) + continue; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + char *mode_cur = m->muxnames[i]; + + if (!mode_cur) + continue; + + if (!strcmp(mode_name, mode_cur)) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val | i; + printk(KERN_DEBUG "mux: Setting signal " + "%s.%s 0x%04x -> 0x%04x\n", + m0_entry, muxname, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } + } + + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n", + found, muxname); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set signal %s\n", muxname); + + return -ENODEV; +} + +#ifdef CONFIG_DEBUG_FS + +#define OMAP_MUX_MAX_NR_FLAGS 10 +#define OMAP_MUX_TEST_FLAG(val, mask) \ + if (((val) & (mask)) == (mask)) { \ + i++; \ + flags[i] = #mask; \ + } + +/* REVISIT: Add checking for non-optimal mux settings */ +static inline void omap_mux_decode(struct seq_file *s, u16 val) +{ + char *flags[OMAP_MUX_MAX_NR_FLAGS]; + char mode[14]; + int i = -1; + + sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7); + i++; + flags[i] = mode; + + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE); + if (val & OMAP_OFF_EN) { + if (!(val & OMAP_OFFOUT_EN)) { + if (!(val & OMAP_OFF_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLUP); + } + } else { + if (!(val & OMAP_OFFOUT_VAL)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_LOW); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_HIGH); + } + } + } + + if (val & OMAP_INPUT_EN) { + if (val & OMAP_PULL_ENA) { + if (!(val & OMAP_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP); + } + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT); + } + } else { + i++; + flags[i] = "OMAP_PIN_OUTPUT"; + } + + do { + seq_printf(s, "%s", flags[i]); + if (i > 0) + seq_printf(s, " | "); + } while (i-- > 0); +} + +#define OMAP_MUX_DEFNAME_LEN 16 + +static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) +{ + struct omap_mux_entry *e; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char m0_def[OMAP_MUX_DEFNAME_LEN]; + char *m0_name = m->muxnames[0]; + u16 val; + int i, mode; + + if (!m0_name) + continue; + + for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) { + if (m0_name[i] == '\0') { + m0_def[i] = m0_name[i]; + break; + } + m0_def[i] = toupper(m0_name[i]); + } + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "OMAP%i_MUX(%s, ", + cpu_is_omap34xx() ? 3 : 0, m0_def); + omap_mux_decode(s, val); + seq_printf(s, "),\n"); + } + + return 0; +} + +static int omap_mux_dbg_board_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_board_show, &inode->i_private); +} + +static const struct file_operations omap_mux_dbg_board_fops = { + .open = omap_mux_dbg_board_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused) +{ + struct omap_mux *m = s->private; + const char *none = "NA"; + u16 val; + int mode; + + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n", + m->muxnames[0], m->muxnames[mode], + mux_phys + m->reg_offset, m->reg_offset, val, + m->balls[0] ? m->balls[0] : none, + m->balls[1] ? m->balls[1] : none); + seq_printf(s, "mode: "); + omap_mux_decode(s, val); + seq_printf(s, "\n"); + seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n", + m->muxnames[0] ? m->muxnames[0] : none, + m->muxnames[1] ? m->muxnames[1] : none, + m->muxnames[2] ? m->muxnames[2] : none, + m->muxnames[3] ? m->muxnames[3] : none, + m->muxnames[4] ? m->muxnames[4] : none, + m->muxnames[5] ? m->muxnames[5] : none, + m->muxnames[6] ? m->muxnames[6] : none, + m->muxnames[7] ? m->muxnames[7] : none); + + return 0; +} + +#define OMAP_MUX_MAX_ARG_CHAR 7 + +static ssize_t omap_mux_dbg_signal_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + char buf[OMAP_MUX_MAX_ARG_CHAR]; + struct seq_file *seqf; + struct omap_mux *m; + unsigned long val; + int buf_size, ret; + + if (count > OMAP_MUX_MAX_ARG_CHAR) + return -EINVAL; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + ret = strict_strtoul(buf, 0x10, &val); + if (ret < 0) + return ret; + + if (val > 0xffff) + return -EINVAL; + + seqf = file->private_data; + m = seqf->private; + + omap_mux_write((u16)val, m->reg_offset); + *ppos += count; + + return count; +} + +static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_signal_show, inode->i_private); +} + +static const struct file_operations omap_mux_dbg_signal_fops = { + .open = omap_mux_dbg_signal_open, + .read = seq_read, + .write = omap_mux_dbg_signal_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *mux_dbg_dir; + +static void __init omap_mux_dbg_init(void) +{ + struct omap_mux_entry *e; + + mux_dbg_dir = debugfs_create_dir("omap_mux", NULL); + if (!mux_dbg_dir) + return; + + (void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir, + NULL, &omap_mux_dbg_board_fops); + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + + (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir, + m, &omap_mux_dbg_signal_fops); + } +} + +#else +static inline void omap_mux_dbg_init(void) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void __init omap_mux_free_names(struct omap_mux *m) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) + kfree(m->muxnames[i]); + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) + kfree(m->balls[i]); #endif + +} + +/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */ +static int __init omap_mux_late_init(void) +{ + struct omap_mux_entry *e, *tmp; + + list_for_each_entry_safe(e, tmp, &muxmodes, node) { + struct omap_mux *m = &e->mux; + u16 mode = omap_mux_read(m->reg_offset); + + if (OMAP_MODE_GPIO(mode)) + continue; + +#ifndef CONFIG_DEBUG_FS + mutex_lock(&muxmode_mutex); + list_del(&e->node); + mutex_unlock(&muxmode_mutex); + omap_mux_free_names(m); + kfree(m); +#endif + + } + + omap_mux_dbg_init(); + + return 0; +} +late_initcall(omap_mux_late_init); + +static void __init omap_mux_package_fixup(struct omap_mux *p, + struct omap_mux *superset) +{ + while (p->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == p->reg_offset) { + *s = *p; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown entry offset 0x%x\n", + p->reg_offset); + p++; + } +} + +#ifdef CONFIG_DEBUG_FS + +static void __init omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ + while (b->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == b->reg_offset) { + s->balls[0] = b->balls[0]; + s->balls[1] = b->balls[1]; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown ball offset 0x%x\n", + b->reg_offset); + b++; + } +} + +#else /* CONFIG_DEBUG_FS */ + +static inline void omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ +} + +#endif /* CONFIG_DEBUG_FS */ + +static int __init omap_mux_setup(char *options) +{ + if (!options) + return 0; + + omap_mux_options = options; + + return 1; +} +__setup("omap_mux=", omap_mux_setup); + +/* + * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234 + * cmdline options only override the bootloader values. + * During development, please enable CONFIG_DEBUG_FS, and use the + * signal specific entries under debugfs. + */ +static void __init omap_mux_set_cmdline_signals(void) +{ + char *options, *next_opt, *token; + + if (!omap_mux_options) + return; + + options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + if (!options) + return; + + strcpy(options, omap_mux_options); + next_opt = options; + + while ((token = strsep(&next_opt, ",")) != NULL) { + char *keyval, *name; + unsigned long val; + + keyval = token; + name = strsep(&keyval, "="); + if (name) { + int res; + + res = strict_strtoul(keyval, 0x10, &val); + if (res < 0) + continue; + + omap_mux_init_signal(name, (u16)val); + } + } + + kfree(options); +} + +static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux) +{ + while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { + omap_mux_write(board_mux->value, board_mux->reg_offset); + board_mux++; + } +} + +static int __init omap_mux_copy_names(struct omap_mux *src, + struct omap_mux *dst) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + if (src->muxnames[i]) { + dst->muxnames[i] = + kmalloc(strlen(src->muxnames[i]) + 1, + GFP_KERNEL); + if (!dst->muxnames[i]) + goto free; + strcpy(dst->muxnames[i], src->muxnames[i]); + } + } + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { + if (src->balls[i]) { + dst->balls[i] = + kmalloc(strlen(src->balls[i]) + 1, + GFP_KERNEL); + if (!dst->balls[i]) + goto free; + strcpy(dst->balls[i], src->balls[i]); + } + } +#endif + + return 0; + +free: + omap_mux_free_names(dst); + return -ENOMEM; + +} + +#endif /* CONFIG_OMAP_MUX */ + +static u16 omap_mux_get_by_gpio(int gpio) +{ + struct omap_mux_entry *e; + u16 offset = OMAP_MUX_TERMINATOR; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (m->gpio == gpio) { + offset = m->reg_offset; + break; + } + } + + return offset; +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +u16 omap_mux_get_gpio(int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not get gpio%i\n", gpio); + return offset; + } + + return omap_mux_read(offset); +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +void omap_mux_set_gpio(u16 val, int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + return; + } + + omap_mux_write(val, offset); +} + +static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src) +{ + struct omap_mux_entry *entry; + struct omap_mux *m; + + entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL); + if (!entry) + return NULL; + + m = &entry->mux; + memcpy(m, src, sizeof(struct omap_mux_entry)); + +#ifdef CONFIG_OMAP_MUX + if (omap_mux_copy_names(src, m)) { + kfree(entry); + return NULL; + } +#endif + + mutex_lock(&muxmode_mutex); + list_add_tail(&entry->node, &muxmodes); + mutex_unlock(&muxmode_mutex); + + return m; +} + +/* + * Note if CONFIG_OMAP_MUX is not selected, we will only initialize + * the GPIO to mux offset mapping that is needed for dynamic muxing + * of GPIO pins for off-idle. + */ +static void __init omap_mux_init_list(struct omap_mux *superset) +{ + while (superset->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *entry; + +#ifndef CONFIG_OMAP_MUX + /* Skip pins that are not muxed as GPIO by bootloader */ + if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { + superset++; + continue; + } +#endif + + entry = omap_mux_list_add(superset); + if (!entry) { + printk(KERN_ERR "mux: Could not add entry\n"); + return; + } + superset++; + } +} + +int __init omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls) +{ + if (mux_base) + return -EBUSY; + + mux_phys = mux_pbase; + mux_base = ioremap(mux_pbase, mux_size); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + +#ifdef CONFIG_OMAP_MUX + omap_mux_package_fixup(package_subset, superset); + omap_mux_package_init_balls(package_balls, superset); + omap_mux_set_cmdline_signals(); + omap_mux_set_board_signals(board_mux); +#endif + + omap_mux_init_list(superset); + + return 0; +} + +#endif /* CONFIG_ARCH_OMAP34XX */ + diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h new file mode 100644 index 000000000000..d8b4d5ad2278 --- /dev/null +++ b/arch/arm/mach-omap2/mux.h @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "mux34xx.h" + +#define OMAP_MUX_TERMINATOR 0xffff + +/* 34xx mux mode options for each pin. See TRM for options */ +#define OMAP_MUX_MODE0 0 +#define OMAP_MUX_MODE1 1 +#define OMAP_MUX_MODE2 2 +#define OMAP_MUX_MODE3 3 +#define OMAP_MUX_MODE4 4 +#define OMAP_MUX_MODE5 5 +#define OMAP_MUX_MODE6 6 +#define OMAP_MUX_MODE7 7 + +/* 24xx/34xx mux bit defines */ +#define OMAP_PULL_ENA (1 << 3) +#define OMAP_PULL_UP (1 << 4) +#define OMAP_ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define OMAP_INPUT_EN (1 << 8) +#define OMAP_OFF_EN (1 << 9) +#define OMAP_OFFOUT_EN (1 << 10) +#define OMAP_OFFOUT_VAL (1 << 11) +#define OMAP_OFF_PULL_EN (1 << 12) +#define OMAP_OFF_PULL_UP (1 << 13) +#define OMAP_WAKEUP_EN (1 << 14) + +/* Active pin states */ +#define OMAP_PIN_OUTPUT 0 +#define OMAP_PIN_INPUT OMAP_INPUT_EN +#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \ + | OMAP_PULL_UP) +#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN) + +/* Off mode states */ +#define OMAP_PIN_OFF_NONE 0 +#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \ + | OMAP_OFFOUT_VAL) +#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN) +#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \ + | OMAP_OFF_PULL_UP) +#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) +#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN + +#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) + +/* Flags for omap_mux_init */ +#define OMAP_PACKAGE_MASK 0xffff +#define OMAP_PACKAGE_CBP 4 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */ +#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */ + + +#define OMAP_MUX_NR_MODES 8 /* Available modes */ +#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */ + +/** + * struct omap_mux - data for omap mux register offset and it's value + * @reg_offset: mux register offset from the mux base + * @gpio: GPIO number + * @muxnames: available signal modes for a ball + */ +struct omap_mux { + u16 reg_offset; + u16 gpio; +#ifdef CONFIG_OMAP_MUX + char *muxnames[OMAP_MUX_NR_MODES]; +#ifdef CONFIG_DEBUG_FS + char *balls[OMAP_MUX_NR_SIDES]; +#endif +#endif +}; + +/** + * struct omap_ball - data for balls on omap package + * @reg_offset: mux register offset from the mux base + * @balls: available balls on the package + */ +struct omap_ball { + u16 reg_offset; + char *balls[OMAP_MUX_NR_SIDES]; +}; + +/** + * struct omap_board_mux - data for initializing mux registers + * @reg_offset: mux register offset from the mux base + * @mux_value: desired mux value to set + */ +struct omap_board_mux { + u16 reg_offset; + u16 value; +}; + +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX) + +/** + * omap_mux_init_gpio - initialize a signal based on the GPIO number + * @gpio: GPIO number + * @val: Options for the mux register value + */ +int omap_mux_init_gpio(int gpio, int val); + +/** + * omap_mux_init_signal - initialize a signal based on the signal name + * @muxname: Mux name in mode0_name.signal_name format + * @val: Options for the mux register value + */ +int omap_mux_init_signal(char *muxname, int val); + +#else + +static inline int omap_mux_init_gpio(int gpio, int val) +{ + return 0; +} +static inline int omap_mux_init_signal(char *muxname, int val) +{ + return 0; +} + +#endif + +/** + * omap_mux_get_gpio() - get mux register value based on GPIO number + * @gpio: GPIO number + * + */ +u16 omap_mux_get_gpio(int gpio); + +/** + * omap_mux_set_gpio() - set mux register value based on GPIO number + * @val: New mux register value + * @gpio: GPIO number + * + */ +void omap_mux_set_gpio(u16 val, int gpio); + +/** + * omap3_mux_init() - initialize mux system with board specific set + * @board_mux: Board specific mux table + * @flags: OMAP package type used for the board + */ +int omap3_mux_init(struct omap_board_mux *board_mux, int flags); + +/** + * omap_mux_init - private mux init function, do not call + */ +int omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c new file mode 100644 index 000000000000..68e0a595f9a1 --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.c @@ -0,0 +1,2099 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include "mux.h" + +#ifdef CONFIG_OMAP_MUX + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ + .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ +} + +#else + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ +} + +#endif + +#define _OMAP3_BALLENTRY(M0, bb, bt) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .balls = { bb, bt }, \ +} + +/* + * Superset of all mux modes for omap3 + */ +static struct omap_mux __initdata omap3_muxmodes[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, NULL, NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, NULL, NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", "hw_dbg9", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D6, 105, + "cam_d6", NULL, NULL, NULL, + "gpio_105", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D7, 106, + "cam_d7", NULL, NULL, NULL, + "gpio_106", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D8, 107, + "cam_d8", NULL, NULL, NULL, + "gpio_107", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D9, 108, + "cam_d9", NULL, NULL, NULL, + "gpio_108", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", "hw_dbg3", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", "hw_dbg2", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", "hw_dbg11", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", "hw_dbg10", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKA, 96, + "cam_xclka", NULL, NULL, NULL, + "gpio_96", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKB, 111, + "cam_xclkb", NULL, NULL, NULL, + "gpio_111", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX0, 112, + "csi2_dx0", NULL, NULL, NULL, + "gpio_112", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX1, 114, + "csi2_dx1", NULL, NULL, NULL, + "gpio_114", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY0, 113, + "csi2_dy0", NULL, NULL, NULL, + "gpio_113", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY1, 115, + "csi2_dy1", NULL, NULL, NULL, + "gpio_115", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_ACBIAS, 69, + "dss_acbias", NULL, NULL, NULL, + "gpio_69", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", NULL, "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", NULL, "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA10, 80, + "dss_data10", NULL, NULL, NULL, + "gpio_80", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA11, 81, + "dss_data11", NULL, NULL, NULL, + "gpio_81", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA12, 82, + "dss_data12", NULL, NULL, NULL, + "gpio_82", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA13, 83, + "dss_data13", NULL, NULL, NULL, + "gpio_83", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA14, 84, + "dss_data14", NULL, NULL, NULL, + "gpio_84", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA15, 85, + "dss_data15", NULL, NULL, NULL, + "gpio_85", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA16, 86, + "dss_data16", NULL, NULL, NULL, + "gpio_86", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA17, 87, + "dss_data17", NULL, NULL, NULL, + "gpio_87", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA18, 88, + "dss_data18", NULL, "mcspi3_clk", "dss_data0", + "gpio_88", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA19, 89, + "dss_data19", NULL, "mcspi3_simo", "dss_data1", + "gpio_89", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA20, 90, + "dss_data20", NULL, "mcspi3_somi", "dss_data2", + "gpio_90", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA21, 91, + "dss_data21", NULL, "mcspi3_cs0", "dss_data3", + "gpio_91", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA22, 92, + "dss_data22", NULL, "mcspi3_cs1", "dss_data4", + "gpio_92", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA23, 93, + "dss_data23", NULL, NULL, "dss_data5", + "gpio_93", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", NULL, NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", NULL, NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", NULL, "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", NULL, "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", "hw_dbg13", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", "hw_dbg12", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_VSYNC, 68, + "dss_vsync", NULL, NULL, NULL, + "gpio_68", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"), + _OMAP3_MUXENTRY(GPMC_A1, 34, + "gpmc_a1", NULL, NULL, NULL, + "gpio_34", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A10, 43, + "gpmc_a10", "sys_ndmareq3", NULL, NULL, + "gpio_43", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A2, 35, + "gpmc_a2", NULL, NULL, NULL, + "gpio_35", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A3, 36, + "gpmc_a3", NULL, NULL, NULL, + "gpio_36", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A4, 37, + "gpmc_a4", NULL, NULL, NULL, + "gpio_37", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A5, 38, + "gpmc_a5", NULL, NULL, NULL, + "gpio_38", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A6, 39, + "gpmc_a6", NULL, NULL, NULL, + "gpio_39", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A7, 40, + "gpmc_a7", NULL, NULL, NULL, + "gpio_40", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A8, 41, + "gpmc_a8", NULL, NULL, NULL, + "gpio_41", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A9, 42, + "gpmc_a9", "sys_ndmareq2", NULL, NULL, + "gpio_42", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_CLK, 59, + "gpmc_clk", NULL, NULL, NULL, + "gpio_59", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D10, 46, + "gpmc_d10", NULL, NULL, NULL, + "gpio_46", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D11, 47, + "gpmc_d11", NULL, NULL, NULL, + "gpio_47", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D12, 48, + "gpmc_d12", NULL, NULL, NULL, + "gpio_48", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D13, 49, + "gpmc_d13", NULL, NULL, NULL, + "gpio_49", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D14, 50, + "gpmc_d14", NULL, NULL, NULL, + "gpio_50", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D15, 51, + "gpmc_d15", NULL, NULL, NULL, + "gpio_51", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D8, 44, + "gpmc_d8", NULL, NULL, NULL, + "gpio_44", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D9, 45, + "gpmc_d9", NULL, NULL, NULL, + "gpio_45", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60, + "gpmc_nbe0_cle", NULL, NULL, NULL, + "gpio_60", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE1, 61, + "gpmc_nbe1", NULL, NULL, NULL, + "gpio_61", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS1, 52, + "gpmc_ncs1", NULL, NULL, NULL, + "gpio_52", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS2, 53, + "gpmc_ncs2", NULL, NULL, NULL, + "gpio_53", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS3, 54, + "gpmc_ncs3", "sys_ndmareq0", NULL, NULL, + "gpio_54", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS4, 55, + "gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt", + "gpio_55", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS5, 56, + "gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt", + "gpio_56", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS6, 57, + "gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt", + "gpio_57", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS7, 58, + "gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt", + "gpio_58", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NWP, 62, + "gpmc_nwp", NULL, NULL, NULL, + "gpio_62", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT1, 63, + "gpmc_wait1", NULL, NULL, NULL, + "gpio_63", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, NULL, NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", NULL, NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HDQ_SIO, 170, + "hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe", + "gpio_170", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_CLK, 120, + "hsusb0_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA4, 188, + "hsusb0_data4", NULL, NULL, NULL, + "gpio_188", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA5, 189, + "hsusb0_data5", NULL, NULL, NULL, + "gpio_189", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA6, 190, + "hsusb0_data6", NULL, NULL, NULL, + "gpio_190", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA7, 191, + "hsusb0_data7", NULL, NULL, NULL, + "gpio_191", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DIR, 122, + "hsusb0_dir", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_NXT, 124, + "hsusb0_nxt", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_STP, 121, + "hsusb0_stp", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SCL, 168, + "i2c2_scl", NULL, NULL, NULL, + "gpio_168", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SDA, 183, + "i2c2_sda", NULL, NULL, NULL, + "gpio_183", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SCL, 184, + "i2c3_scl", NULL, NULL, NULL, + "gpio_184", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SDA, 185, + "i2c3_sda", NULL, NULL, NULL, + "gpio_185", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SCL, 0, + "i2c4_scl", "sys_nvmode1", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SDA, 0, + "i2c4_sda", "sys_nvmode2", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU0, 11, + "jtag_emu0", NULL, NULL, NULL, + "gpio_11", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU1, 31, + "jtag_emu1", NULL, NULL, NULL, + "gpio_31", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", NULL, NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKX, 162, + "mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL, + "gpio_162", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DR, 159, + "mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL, + "gpio_159", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DX, 158, + "mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL, + "gpio_158", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", NULL, "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSX, 161, + "mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL, + "gpio_161", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_CLKX, 117, + "mcbsp2_clkx", NULL, NULL, NULL, + "gpio_117", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DR, 118, + "mcbsp2_dr", NULL, NULL, NULL, + "gpio_118", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DX, 119, + "mcbsp2_dx", NULL, NULL, NULL, + "gpio_119", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_FSX, 116, + "mcbsp2_fsx", NULL, NULL, NULL, + "gpio_116", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", NULL, NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", NULL, NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", NULL, NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", NULL, NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP_CLKS, 160, + "mcbsp_clks", NULL, "cam_shutter", NULL, + "gpio_160", "uart1_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CLK, 171, + "mcspi1_clk", "sdmmc2_dat4", NULL, NULL, + "gpio_171", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS0, 174, + "mcspi1_cs0", "sdmmc2_dat7", NULL, NULL, + "gpio_174", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", NULL, NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS2, 176, + "mcspi1_cs2", NULL, NULL, "sdmmc3_clk", + "gpio_176", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS3, 177, + "mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2", + "gpio_177", "mm2_txdat", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SIMO, 172, + "mcspi1_simo", "sdmmc2_dat5", NULL, NULL, + "gpio_172", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SOMI, 173, + "mcspi1_somi", "sdmmc2_dat6", NULL, NULL, + "gpio_173", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CLK, 178, + "mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7", + "gpio_178", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS0, 181, + "mcspi2_cs0", "gpt11_pwm_evt", + "hsusb2_tll_data6", "hsusb2_data6", + "gpio_181", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS1, 182, + "mcspi2_cs1", "gpt8_pwm_evt", + "hsusb2_tll_data3", "hsusb2_data3", + "gpio_182", "mm2_txen_n", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SIMO, 179, + "mcspi2_simo", "gpt9_pwm_evt", + "hsusb2_tll_data4", "hsusb2_data4", + "gpio_179", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SOMI, 180, + "mcspi2_somi", "gpt10_pwm_evt", + "hsusb2_tll_data5", "hsusb2_data5", + "gpio_180", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", NULL, NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", NULL, NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT4, 126, + "sdmmc1_dat4", NULL, "sim_io", NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT5, 127, + "sdmmc1_dat5", NULL, "sim_clk", NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT6, 128, + "sdmmc1_dat6", NULL, "sim_pwrctrl", NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT7, 129, + "sdmmc1_dat7", NULL, "sim_rst", NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CLK, 130, + "sdmmc2_clk", "mcspi3_clk", NULL, NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CMD, 131, + "sdmmc2_cmd", "mcspi3_simo", NULL, NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT0, 132, + "sdmmc2_dat0", "mcspi3_somi", NULL, NULL, + "gpio_132", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT1, 133, + "sdmmc2_dat1", NULL, NULL, NULL, + "gpio_133", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT2, 134, + "sdmmc2_dat2", "mcspi3_cs1", NULL, NULL, + "gpio_134", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT3, 135, + "sdmmc2_dat3", "mcspi3_cs0", NULL, NULL, + "gpio_135", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT4, 136, + "sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0", + "gpio_136", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, NULL, + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, NULL, + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT2, 4, + "sys_boot2", NULL, NULL, NULL, + "gpio_4", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, NULL, + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, NULL, + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, NULL, + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, NULL, + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT1, 10, + "sys_clkout1", NULL, NULL, NULL, + "gpio_10", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT2, 186, + "sys_clkout2", NULL, NULL, NULL, + "gpio_186", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKREQ, 1, + "sys_clkreq", NULL, NULL, NULL, + "gpio_1", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NIRQ, 0, + "sys_nirq", NULL, NULL, NULL, + "gpio_0", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NRESWARM, 30, + "sys_nreswarm", NULL, NULL, NULL, + "gpio_30", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_OFF_MODE, 9, + "sys_off_mode", NULL, NULL, NULL, + "gpio_9", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", NULL, NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RX, 151, + "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "gpio_151", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", NULL, NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_CTS, 144, + "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, + "gpio_144", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RTS, 145, + "uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL, + "gpio_145", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RX, 147, + "uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL, + "gpio_147", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_TX, 146, + "uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL, + "gpio_146", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_CTS_RCTX, 163, + "uart3_cts_rctx", NULL, NULL, NULL, + "gpio_163", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RTS_SD, 164, + "uart3_rts_sd", NULL, NULL, NULL, + "gpio_164", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RX_IRRX, 165, + "uart3_rx_irrx", NULL, NULL, NULL, + "gpio_165", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_TX_IRTX, 166, + "uart3_tx_irtx", NULL, NULL, NULL, + "gpio_166", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +/* + * Signals different on CBC package compared to the superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_mux __initdata omap3_cbc_subset[] = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_subset NULL +#endif + +/* + * Balls for CBC package + * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom) + * + * FIXME: What's up with the outdated TI documentation? See: + * + * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package + * http://community.ti.com/forums/t/10982.aspx + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_ball __initdata omap3_cbc_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), + _OMAP3_BALLENTRY(CAM_D10, "d25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "e26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "a24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D6, "p25", NULL), + _OMAP3_BALLENTRY(CAM_D7, "p26", NULL), + _OMAP3_BALLENTRY(CAM_D8, "n25", NULL), + _OMAP3_BALLENTRY(CAM_D9, "n26", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "b23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "c23", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL), + _OMAP3_BALLENTRY(CAM_VS, "d23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "a23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ad4", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae4", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af6", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ae6", NULL), + _OMAP3_BALLENTRY(ETK_D13, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ae9", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D3, "aa3", NULL), + _OMAP3_BALLENTRY(ETK_D4, "y3", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ab1", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ae3", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D8, "aa4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "f1", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "f2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "e2", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "d1", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"), + _OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"), + _OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"), + _OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"), + _OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"), + _OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"), + _OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"), + _OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "r2", NULL), + _OMAP3_BALLENTRY(UART1_RX, "h3", NULL), + _OMAP3_BALLENTRY(UART1_TX, "l4", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "y24", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad21", NULL), + _OMAP3_BALLENTRY(UART2_TX, "ad22", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_ball NULL +#endif + +/* + * Signals different on CUS package compared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_mux __initdata omap3_cus_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_subset NULL +#endif + +/* + * Balls for CUS package + * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_ball __initdata omap3_cus_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ab18", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ac18", NULL), + _OMAP3_BALLENTRY(CAM_D10, "f21", NULL), + _OMAP3_BALLENTRY(CAM_D11, "g21", NULL), + _OMAP3_BALLENTRY(CAM_D2, "g19", NULL), + _OMAP3_BALLENTRY(CAM_D3, "f19", NULL), + _OMAP3_BALLENTRY(CAM_D4, "g20", NULL), + _OMAP3_BALLENTRY(CAM_D5, "b21", NULL), + _OMAP3_BALLENTRY(CAM_D6, "l24", NULL), + _OMAP3_BALLENTRY(CAM_D7, "k24", NULL), + _OMAP3_BALLENTRY(CAM_D8, "j23", NULL), + _OMAP3_BALLENTRY(CAM_D9, "k23", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "h24", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a22", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL), + _OMAP3_BALLENTRY(CAM_VS, "e18", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "f18", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ad6", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ac6", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D11, "ac9", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ac10", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ad11", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ac11", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ad12", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ac7", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ad8", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ac5", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ac8", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad9", NULL), + _OMAP3_BALLENTRY(ETK_D8, "ac4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ad5", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "k4", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "k3", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "j4", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "j3", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL), + _OMAP3_BALLENTRY(GPMC_D10, "u1", NULL), + _OMAP3_BALLENTRY(GPMC_D11, "r3", NULL), + _OMAP3_BALLENTRY(GPMC_D12, "t3", NULL), + _OMAP3_BALLENTRY(GPMC_D13, "u2", NULL), + _OMAP3_BALLENTRY(GPMC_D14, "v1", NULL), + _OMAP3_BALLENTRY(GPMC_D15, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_D8, "r2", NULL), + _OMAP3_BALLENTRY(GPMC_D9, "t2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "w6", NULL), + _OMAP3_BALLENTRY(UART1_RX, "v7", NULL), + _OMAP3_BALLENTRY(UART1_TX, "w7", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_ball NULL +#endif + +/* + * Signals different on CBB package comapared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_mux __initdata omap3_cbb_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_subset NULL +#endif + +/* + * Balls for CBB package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_ball __initdata omap3_cbb_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_ball NULL +#endif + +/* + * Signals different on 36XX CBP package comapared to 34XX CBC package + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP) +struct omap_mux __initdata omap36xx_cbp_subset[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, "csi2_dx2", NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, "csi2_dy2", NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", "ssi2_wake", NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", "ssi2_rdy_tx", NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", "ssi2_dat_rx", NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", "ssi2_flag_rx", NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", "ssi2_rdy_rx", NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", "ssi2_dat_tx", NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", "ssi2_flag_tx", NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", "dsi_dx0", "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", "dsi_dy0", "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", "dsi_dx1", NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", "dsi_dy1", NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", "dssvenc656_data6", + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", "dssvenc656_data7", + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, "uart3_rx_irrx", NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, "uart3_tx_irtx", NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(GPMC_A11, 0, + "gpmc_a11", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, "uart4_tx", NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", "uart2_tx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", "uart2_rx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", "uart2_rts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", "uart2_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", "adpllv2d_dithering_en1", + "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", "ssi1_flag_rx", NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", "ssi1_wake", NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, + "sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, + "sad2d_mcad28", "mad2d_mcad28", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, + "sad2d_mcad29", "mad2d_mcad29", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, + "sad2d_mcad32", "mad2d_mcad32", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, + "sad2d_mcad33", "mad2d_mcad33", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, + "sad2d_mcad34", "mad2d_mcad34", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, + "sad2d_mcad35", "mad2d_mcad35", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, + "sad2d_mcad36", "mad2d_mcad36", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MREAD, 0, + "sad2d_mread", "mad2d_sread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, + "sad2d_mwrite", "mad2d_swrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, + "sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SREAD, 0, + "sad2d_sread", "mad2d_mread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, + "sad2d_swrite", "mad2d_mwrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", "ms_clk", NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", "ms_bs", NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", "ms_dat0", NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", "ms_dat1", NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", "ms_dat2", NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", "ms_dat3", NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SIM_IO, 126, + "sim_io", "sim_io_low_impedance", NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_CLK, 127, + "sim_clk", NULL, NULL, NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_PWRCTRL, 128, + "sim_pwrctrl", NULL, NULL, NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_RST, 129, + "sim_rst", NULL, NULL, NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, "dss_data18", + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, "dss_data19", + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, "dss_data20", + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21", + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22", + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, "dss_data23", + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_subset NULL +#endif + +/* + * Balls for 36XX CBP package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined (CONFIG_OMAP_PACKAGE_CBP) +struct omap_ball __initdata omap36xx_cbp_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"), + _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"), + _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"), + _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"), + _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"), + _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"), + _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL), + _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL), + _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL), + _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL), + _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL), + _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"), + _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"), + _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"), + _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"), + _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"), + _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"), + _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"), + _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"), + _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"), + _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"), + _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"), + _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"), + _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"), + _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"), + _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"), + _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"), + _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"), + _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"), + _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"), + _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"), + _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"), + _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"), + _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"), + _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"), + _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"), + _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"), + _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"), + _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"), + _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"), + _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"), + _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"), + _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"), + _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"), + _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"), + _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"), + _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"), + _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"), + _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"), + _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"), + _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"), + _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"), + _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"), + _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"), + _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"), + _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"), + _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"), + _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"), + _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"), + _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"), + _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"), + _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"), + _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"), + _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"), + _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"), + _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"), + _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"), + _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"), + _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"), + _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"), + _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"), + _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"), + _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"), + _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"), + _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"), + _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"), + _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"), + _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL), + _OMAP3_BALLENTRY(SIM_IO, "p27", NULL), + _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL), + _OMAP3_BALLENTRY(SIM_RST, "r25", NULL), + _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_ball NULL +#endif + +int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) +{ + struct omap_mux *package_subset; + struct omap_ball *package_balls; + + switch (flags & OMAP_PACKAGE_MASK) { + case (OMAP_PACKAGE_CBC): + package_subset = omap3_cbc_subset; + package_balls = omap3_cbc_ball; + break; + case (OMAP_PACKAGE_CBB): + package_subset = omap3_cbb_subset; + package_balls = omap3_cbb_ball; + break; + case (OMAP_PACKAGE_CUS): + package_subset = omap3_cus_subset; + package_balls = omap3_cus_ball; + break; + case (OMAP_PACKAGE_CBP): + package_subset = omap36xx_cbp_subset; + package_balls = omap36xx_cbp_ball; + break; + default: + printk(KERN_ERR "mux: Unknown omap package, mux disabled\n"); + return -EINVAL; + } + + return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE, + OMAP3_CONTROL_PADCONF_MUX_SIZE, + omap3_muxmodes, package_subset, board_subset, + package_balls); +} diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h new file mode 100644 index 000000000000..6543ebf8ecfc --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.h @@ -0,0 +1,398 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP3_CONTROL_PADCONF_MUX_PBASE 0x48002030LU + +#define OMAP3_MUX(mode0, mux_value) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET), \ + .value = (mux_value), \ +} + +/* + * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing + * + * Extracted from the TRM. Add 0x48002030 to these values to get the + * absolute addresses. The name in the macro is the mode-0 name of + * the pin. NOTE: These registers are 16-bits wide. + * + * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead + * of CHASSIS for some registers. For the defines, we follow the + * 36XX naming, and use SDMMC and CHASSIS. + */ +#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET 0x000 +#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET 0x002 +#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET 0x004 +#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET 0x006 +#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET 0x008 +#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET 0x00a +#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET 0x00c +#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET 0x00e +#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET 0x010 +#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET 0x012 +#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET 0x014 +#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET 0x016 +#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET 0x018 +#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET 0x01a +#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET 0x01c +#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET 0x01e +#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET 0x020 +#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET 0x022 +#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET 0x024 +#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET 0x026 +#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET 0x028 +#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02a +#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02c +#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET 0x02e +#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET 0x030 +#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET 0x032 +#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET 0x034 +#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET 0x036 +#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038 +#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET 0x03a +#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET 0x03c +#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET 0x03e +#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x040 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x042 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x044 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x046 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x048 +#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a +#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET 0x04c +#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET 0x04e +#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET 0x050 +#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET 0x052 +#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET 0x054 +#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET 0x056 +#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET 0x058 +#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET 0x05a +#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET 0x05c +#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05e +#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET 0x060 +#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET 0x062 +#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET 0x064 +#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET 0x066 +#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET 0x068 +#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET 0x06a +#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET 0x06c +#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET 0x06e +#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET 0x070 +#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET 0x072 +#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET 0x074 +#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET 0x076 +#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET 0x078 +#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET 0x07a +#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET 0x07c +#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x07e +#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x080 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x082 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x084 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x086 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x088 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x08a +#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x08c +#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x08e +#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x090 +#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x092 +#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x094 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x096 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x098 +#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x09a +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x09c +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x09e +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x0a0 +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x0a2 +#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x0a4 +#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x0a6 +#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x0a8 +#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x0aa +#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x0ac +#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x0ae +#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x0b0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x0b2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x0b4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x0b6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x0b8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x0ba +#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x0bc +#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x0be +#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x0c0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x0c2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x0c4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x0c6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x0c8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x0ca +#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x0cc +#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x0ce +#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET 0x0d0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET 0x0d2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET 0x0d4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET 0x0d6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET 0x0d8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET 0x0da +#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET 0x0dc +#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET 0x0de +#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET 0x0e0 +#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET 0x0e2 +#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET 0x0e4 +#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET 0x0e6 +#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET 0x0e8 +#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ea +#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET 0x0ec +#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET 0x0ee +#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET 0x0f0 +#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET 0x0f2 +#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET 0x0f4 +#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET 0x0f6 +#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET 0x0f8 +#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET 0x0fa +#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET 0x0fc +#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET 0x0fe +#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET 0x100 +#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET 0x102 +#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET 0x104 +#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET 0x106 +#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET 0x108 +#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET 0x10a +#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET 0x10c +#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x10e +#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x110 +#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET 0x112 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET 0x114 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x116 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x118 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e + +/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */ +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126 + +#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128 +#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x12e +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x130 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x132 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET 0x134 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET 0x136 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET 0x138 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET 0x13a +#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x13c +#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x13e +#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x140 +#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x142 +#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET 0x144 +#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET 0x146 +#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET 0x148 +#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET 0x14a +#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET 0x14c +#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET 0x14e +#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET 0x150 +#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET 0x152 +#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET 0x154 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET 0x156 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET 0x158 +#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET 0x15a +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x15c +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x15e +#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x160 +#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x162 +#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x164 +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x166 +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x168 +#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x16a +#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x16c +#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x16e +#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x170 +#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET 0x172 +#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET 0x174 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET 0x176 +#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET 0x178 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET 0x17a +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET 0x17c +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET 0x17e +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET 0x180 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET 0x182 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET 0x184 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET 0x186 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET 0x188 +#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x18a +#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x18c +#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x18e +#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x190 +#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET 0x192 +#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET 0x194 +#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x196 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET 0x198 +#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET 0x19a +#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET 0x19c +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET 0x19e +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET 0x1a0 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET 0x1a2 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET 0x1a4 +#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET 0x1a6 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET 0x1a8 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET 0x1aa +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET 0x1ac +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET 0x1ae +#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x1b0 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET 0x1b2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET 0x1b4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET 0x1b6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET 0x1b8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET 0x1ba +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET 0x1bc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET 0x1be +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET 0x1c0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET 0x1c2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET 0x1c4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET 0x1c6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET 0x1c8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET 0x1ca +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET 0x1cc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET 0x1ce +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET 0x1d0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET 0x1d2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET 0x1d4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET 0x1d6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET 0x1d8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET 0x1da +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET 0x1dc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET 0x1de +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET 0x1e0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET 0x1e2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET 0x1e4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET 0x1e6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET 0x1e8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET 0x1ea +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET 0x1ec +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET 0x1ee +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET 0x1f0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET 0x1f2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET 0x1f4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET 0x1f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc + +/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */ +#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET 0x202 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET 0x204 +#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET 0x206 +#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET 0x208 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET 0x20a +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET 0x20c +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET 0x20e +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET 0x210 +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET 0x212 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET 0x214 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET 0x216 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET 0x218 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET 0x21a +#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET 0x21c +#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET 0x21e +#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224 + +#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228 +#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a +#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET 0x22c +#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET 0x22e +#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234 + +/* 36xx only */ +#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET 0x236 +#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x570 +#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x572 +#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET 0x574 +#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET 0x576 +#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET 0x578 +#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET 0x57a +#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET 0x57c +#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET 0x57e +#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET 0x580 +#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET 0x582 +#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET 0x584 +#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET 0x586 +#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET 0x588 +#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET 0x58a +#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET 0x58c +#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET 0x58e +#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET 0x590 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x592 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x594 +#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x596 +#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x598 +#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x59a +#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x59c +#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x59e +#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x5a0 +#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x5a2 +#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x5a4 + +/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */ +#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET 0x126 + +#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8 +#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa +#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac +#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET 0x5ae +#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET 0x5b0 +#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET 0x5b2 +#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET 0x5b4 +#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET 0x5b6 +#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET 0x5b8 +#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET 0x5ba +#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET 0x5bc +#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET 0x5be +#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET 0x5c0 +#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET 0x5c2 +#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET 0x5c4 +#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET 0x5c6 +#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET 0x5c8 +#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET 0x5ca +#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET 0x9d0 +#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET 0x9d2 +#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET 0x9d4 +#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x9d6 +#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x9d8 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET 0x9da +#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET 0x9dc +#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET 0x9de +#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET 0x9e0 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET 0x9e2 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET 0x9e4 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET 0x9e6 +#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET 0x9e8 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET 0x9ea +#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x9ec +#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x9ee +#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET 0x9f0 +#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x9f2 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x9f4 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x9f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c +#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e +#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20 + +#define OMAP3_CONTROL_PADCONF_MUX_SIZE \ + (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4afadba09477..aa3f65c2ac97 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -27,20 +27,39 @@ * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which * secondary core is held until we're ready for it to initialise. - * The primary core will update the this flag using a hardware - * register AuxCoreBoot1. + * The primary core will update this flag using a hardware + * register AuxCoreBoot0. */ ENTRY(omap_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #0x0f -hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1 - ldr r2, [r1] - cmp r2, r0 +hold: ldr r12,=0x103 + dsb + smc @ read from AuxCoreBoot0 + mov r0, r0, lsr #9 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 bne hold /* - * we've been released from the cpu_release,secondary_stack + * we've been released from the wait loop,secondary_stack * should now contain the SVC stack for this core */ b secondary_startup +END(omap_secondary_startup) + +ENTRY(omap_modify_auxcoreboot0) + stmfd sp!, {r1-r12, lr} + ldr r12, =0x104 + dsb + smc + ldmfd sp!, {r1-r12, pc} +END(omap_modify_auxcoreboot0) + +ENTRY(omap_auxcoreboot_addr) + stmfd sp!, {r2-r12, lr} + ldr r12, =0x105 + dsb + smc + ldmfd sp!, {r2-r12, pc} +END(omap_auxcoreboot_addr) diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4890bcf4dadd..38153e5fbca0 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -17,19 +17,15 @@ */ #include #include -#include #include #include +#include #include #include #include #include -/* Registers used for communicating startup information */ -static void __iomem *omap4_auxcoreboot_reg0; -static void __iomem *omap4_auxcoreboot_reg1; - /* SCU base address */ static void __iomem *scu_base; @@ -65,8 +61,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; - /* * Set synchronisation state between this boot processor * and the secondary one @@ -74,18 +68,15 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) spin_lock(&boot_lock); /* - * Update the AuxCoreBoot1 with boot state for secondary core. + * Update the AuxCoreBoot0 with boot state for secondary core. * omap_secondary_startup() routine will hold the secondary core till * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - __raw_writel(cpu, omap4_auxcoreboot_reg1); + omap_modify_auxcoreboot0(0x200, 0x0); + flush_cache_all(); smp_wmb(); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) - ; - /* * Now the secondary core is starting up let it run its * calibrations, then wait for it to finish @@ -99,17 +90,18 @@ static void __init wakeup_secondary(void) { /* * Write the address of secondary startup routine into the - * AuxCoreBoot0 where ROM code will jump and start executing + * AuxCoreBoot1 where ROM code will jump and start executing * on secondary core once out of WFE * A barrier is added to ensure that write buffer is drained */ - __raw_writel(virt_to_phys(omap_secondary_startup), \ - omap4_auxcoreboot_reg0); + omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); smp_wmb(); /* * Send a 'sev' to wake the secondary core from WFE. + * Drain the outstanding writes to memory */ + dsb(); set_event(); mb(); } @@ -136,7 +128,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); unsigned int cpu = smp_processor_id(); - void __iomem *omap4_wkupgen_base; int i; /* sanity check */ @@ -168,12 +159,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - /* Never released */ - omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); - BUG_ON(!omap4_wkupgen_base); - omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800; - omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804; - if (max_cpus > 1) { /* * Enable the local timer or broadcast device for the diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 2e17b57f5b23..39b797bc14d6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -33,6 +33,7 @@ #include "pm.h" #include "prm-regbits-34xx.h" +#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ #define DEFAULT_TIMEOUT (5 * HZ) @@ -572,6 +573,23 @@ static struct omap_uart_state omap_uart[] = { #endif }; +/* + * Override the default 8250 read handler: mem_serial_in() + * Empty RX fifo read causes an abort on omap3630 and omap4 + * This function makes sure that an empty rx fifo is not read on these silicons + * (OMAP1/2/3430 are not affected) + */ +static unsigned int serial_in_override(struct uart_port *up, int offset) +{ + if (UART_RX == offset) { + unsigned int lsr; + lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR); + if (!(lsr & UART_LSR_DR)) + return -EPERM; + } + return serial_read_reg(omap_uart[up->line].p, offset); +} + void __init omap_serial_early_init(void) { int i; @@ -631,24 +649,64 @@ void __init omap_serial_early_init(void) } } +/** + * omap_serial_init_port() - initialize single serial port + * @port: serial port number (0-3) + * + * This function initialies serial driver for given @port only. + * Platforms can call this function instead of omap_serial_init() + * if they don't plan to use all available UARTs as serial ports. + * + * Don't mix calls to omap_serial_init_port() and omap_serial_init(), + * use only one of the two. + */ +void __init omap_serial_init_port(int port) +{ + struct omap_uart_state *uart; + struct platform_device *pdev; + struct device *dev; + + BUG_ON(port < 0); + BUG_ON(port >= ARRAY_SIZE(omap_uart)); + + uart = &omap_uart[port]; + pdev = &uart->pdev; + dev = &pdev->dev; + + omap_uart_reset(uart); + omap_uart_idle_init(uart); + + if (WARN_ON(platform_device_register(pdev))) + return; + + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); + } + + /* omap44xx: Never read empty UART fifo + * omap3xxx: Never read empty UART fifo on UARTs + * with IP rev >=0x52 + */ + if (cpu_is_omap44xx()) + uart->p->serial_in = serial_in_override; + else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) + uart->p->serial_in = serial_in_override; +} + +/** + * omap_serial_init() - intialize all supported serial ports + * + * Initializes all available UARTs as serial ports. Platforms + * can call this function when they want to have default behaviour + * for serial ports (e.g initialize them all as serial ports). + */ void __init omap_serial_init(void) { int i; - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { - struct omap_uart_state *uart = &omap_uart[i]; - struct platform_device *pdev = &uart->pdev; - struct device *dev = &pdev->dev; - - omap_uart_reset(uart); - omap_uart_idle_init(uart); - - if (WARN_ON(platform_device_register(pdev))) - continue; - if ((cpu_is_omap34xx() && uart->padconf) || - (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(dev, true); - DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); - } - } + for (i = 0; i < ARRAY_SIZE(omap_uart); i++) + omap_serial_init_port(i); } diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index e448abd5ec5d..f1df873d59db 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -27,6 +27,8 @@ #include #include +#include "mux.h" + #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) static struct resource ehci_resources[] = { @@ -72,32 +74,44 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) { switch (port_mode[0]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); - omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); - omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); - omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); - omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); - omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); - omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); - omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); - omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); + omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); - omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); - omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); - omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); - omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); - omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); - omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); - omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); - omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); + omap_mux_init_signal("hsusb1_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb1_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -107,32 +121,52 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) switch (port_mode[1]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); - omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); - omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); - omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); - omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); - omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); - omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); - omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); - omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); - omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); - omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); + omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); - omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); - omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); - omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); - omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); - omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); - omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); - omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); - omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); - omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); - omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); + omap_mux_init_signal("hsusb2_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb2_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -145,18 +179,30 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); - omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); - omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); - omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); - omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); - omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); - omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); - omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); - omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); - omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); - omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); - omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); + omap_mux_init_signal("hsusb3_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb3_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 01ab1e56db1e..bf1eaf3a27d4 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -280,7 +280,7 @@ void __init omap2_set_globals_343x(void) #if defined(CONFIG_ARCH_OMAP4) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4830a000), + .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 09c1107637f6..923c9621096b 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -13,6 +13,7 @@ #include #include #include +#include #include @@ -24,6 +25,12 @@ * platforms include H2, H3, H4, and Perseus2. */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -36,6 +43,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index f86617869b38..30b5db73017a 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -242,6 +242,39 @@ fail: /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_RNG_BASE 0x480A0000 +#else +#define OMAP_RNG_BASE 0xfffe5000 +#endif + +static struct resource rng_resources[] = { + { + .start = OMAP_RNG_BASE, + .end = OMAP_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_rng_device = { + .name = "omap_rng", + .id = -1, + .num_resources = ARRAY_SIZE(rng_resources), + .resource = rng_resources, +}; + +static void omap_init_rng(void) +{ + (void) platform_device_register(&omap_rng_device); +} +#else +static inline void omap_init_rng(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + /* Numbering for the SPI-capable controllers when used for SPI: * spi = 1 * uwire = 2 @@ -324,39 +357,6 @@ static void omap_init_wdt(void) static inline void omap_init_wdt(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -384,9 +384,9 @@ static int __init omap_init_devices(void) */ omap_init_dsp(); omap_init_kp(); + omap_init_rng(); omap_init_uwire(); omap_init_wdt(); - omap_init_rng(); return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index d17375e06a1e..09d82b3c66ce 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -47,7 +47,6 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; #endif #define OMAP_DMA_ACTIVE 0x01 -#define OMAP_DMA_CCR_EN (1 << 7) #define OMAP2_DMA_CSR_CLEAR_MASK 0xffe #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -1120,17 +1119,8 @@ int omap_dma_running(void) { int lch; - /* - * On OMAP1510, internal LCD controller will start the transfer - * when it gets enabled, so assume DMA running if LCD enabled. - */ - if (cpu_is_omap1510()) - if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) - return 1; - - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + if (cpu_class_is_omap1()) + if (omap_lcd_dma_running()) return 1; for (lch = 0; lch < dma_chan_count; lch++) @@ -1990,377 +1980,6 @@ static struct irqaction omap24xx_dma_irq; /*----------------------------------------------------------------------------*/ -static struct lcd_dma_info { - spinlock_t lock; - int reserved; - void (*callback)(u16 status, void *data); - void *cb_data; - - int active; - unsigned long addr, size; - int rotate, data_type, xres, yres; - int vxres; - int mirror; - int xscale, yscale; - int ext_ctrl; - int src_port; - int single_transfer; -} lcd_dma; - -void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type) -{ - lcd_dma.addr = addr; - lcd_dma.data_type = data_type; - lcd_dma.xres = fb_xres; - lcd_dma.yres = fb_yres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1); - -void omap_set_lcd_dma_src_port(int port) -{ - lcd_dma.src_port = port; -} - -void omap_set_lcd_dma_ext_controller(int external) -{ - lcd_dma.ext_ctrl = external; -} -EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); - -void omap_set_lcd_dma_single_transfer(int single) -{ - lcd_dma.single_transfer = single; -} -EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); - -void omap_set_lcd_dma_b1_rotation(int rotate) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); - BUG(); - return; - } - lcd_dma.rotate = rotate; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); - -void omap_set_lcd_dma_b1_mirror(int mirror) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.mirror = mirror; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); - -void omap_set_lcd_dma_b1_vxres(unsigned long vxres) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " - "in 1510 mode\n"); - BUG(); - } - lcd_dma.vxres = vxres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); - -void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.xscale = xscale; - lcd_dma.yscale = yscale; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); - -static void set_b1_regs(void) -{ - unsigned long top, bottom; - int es; - u16 w; - unsigned long en, fn; - long ei, fi; - unsigned long vxres; - unsigned int xscale, yscale; - - switch (lcd_dma.data_type) { - case OMAP_DMA_DATA_TYPE_S8: - es = 1; - break; - case OMAP_DMA_DATA_TYPE_S16: - es = 2; - break; - case OMAP_DMA_DATA_TYPE_S32: - es = 4; - break; - default: - BUG(); - return; - } - - vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; - xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; - yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; - BUG_ON(vxres < lcd_dma.xres); - -#define PIXADDR(x, y) (lcd_dma.addr + \ - ((y) * vxres * yscale + (x) * xscale) * es) -#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) - - switch (lcd_dma.rotate) { - case 0: - if (!lcd_dma.mirror) { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - /* 1510 DMA requires the bottom address to be 2 more - * than the actual last memory access location. */ - if (omap_dma_in_1510_mode() && - lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) - bottom += 2; - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 90: - if (!lcd_dma.mirror) { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - case 180: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); - } else { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 270: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); - } else { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - default: - BUG(); - return; /* Suppress warning about uninitialized vars */ - } - - if (omap_dma_in_1510_mode()) { - omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); - omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); - omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); - omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); - - return; - } - - /* 1610 regs */ - omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); - omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); - omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); - omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); - - omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); - omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); - - w = omap_readw(OMAP1610_DMA_LCD_CSDP); - w &= ~0x03; - w |= lcd_dma.data_type; - omap_writew(w, OMAP1610_DMA_LCD_CSDP); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - /* Always set the source port as SDRAM for now*/ - w &= ~(0x03 << 6); - if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ - else - w &= ~(1 << 1); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - if (!(lcd_dma.rotate || lcd_dma.mirror || - lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* Set the double-indexed addressing mode */ - w |= (0x03 << 12); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); - omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); - omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); -} - -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) -{ - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - if (unlikely(!(w & (1 << 3)))) { - printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); - return IRQ_NONE; - } - /* Ack the IRQ */ - w |= (1 << 3); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - lcd_dma.active = 0; - if (lcd_dma.callback != NULL) - lcd_dma.callback(w, lcd_dma.cb_data); - - return IRQ_HANDLED; -} - -int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data) -{ - spin_lock_irq(&lcd_dma.lock); - if (lcd_dma.reserved) { - spin_unlock_irq(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA channel already reserved\n"); - BUG(); - return -EBUSY; - } - lcd_dma.reserved = 1; - spin_unlock_irq(&lcd_dma.lock); - lcd_dma.callback = callback; - lcd_dma.cb_data = data; - lcd_dma.active = 0; - lcd_dma.single_transfer = 0; - lcd_dma.rotate = 0; - lcd_dma.vxres = 0; - lcd_dma.mirror = 0; - lcd_dma.xscale = 0; - lcd_dma.yscale = 0; - lcd_dma.ext_ctrl = 0; - lcd_dma.src_port = 0; - - return 0; -} -EXPORT_SYMBOL(omap_request_lcd_dma); - -void omap_free_lcd_dma(void) -{ - spin_lock(&lcd_dma.lock); - if (!lcd_dma.reserved) { - spin_unlock(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA is not reserved\n"); - BUG(); - return; - } - if (!enable_1510_mode) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, - OMAP1610_DMA_LCD_CCR); - lcd_dma.reserved = 0; - spin_unlock(&lcd_dma.lock); -} -EXPORT_SYMBOL(omap_free_lcd_dma); - -void omap_enable_lcd_dma(void) -{ - u16 w; - - /* - * Set the Enable bit only if an external controller is - * connected. Otherwise the OMAP internal controller will - * start the transfer when it gets enabled. - */ - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w |= 1 << 8; - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - lcd_dma.active = 1; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w |= 1 << 7; - omap_writew(w, OMAP1610_DMA_LCD_CCR); -} -EXPORT_SYMBOL(omap_enable_lcd_dma); - -void omap_setup_lcd_dma(void) -{ - BUG_ON(lcd_dma.active); - if (!enable_1510_mode) { - /* Set some reasonable defaults */ - omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); - omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); - omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); - } - set_b1_regs(); - if (!enable_1510_mode) { - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* - * If DMA was already active set the end_prog bit to have - * the programmed register set loaded into the active - * register set. - */ - w |= 1 << 11; /* End_prog */ - if (!lcd_dma.single_transfer) - w |= (3 << 8); /* Auto_init, repeat */ - omap_writew(w, OMAP1610_DMA_LCD_CCR); - } -} -EXPORT_SYMBOL(omap_setup_lcd_dma); - -void omap_stop_lcd_dma(void) -{ - u16 w; - - lcd_dma.active = 0; - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w &= ~(1 << 7); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); -} -EXPORT_SYMBOL(omap_stop_lcd_dma); - void omap_dma_global_context_save(void) { omap_dma_global_context.dma_irqenable_l0 = @@ -2465,14 +2084,6 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; - if (cpu_is_omap16xx()) { - u16 w; - - /* this would prevent OMAP sleep */ - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - } } else if (cpu_class_is_omap2()) { u8 revision = dma_read(REVISION) & 0xff; printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", @@ -2483,7 +2094,6 @@ static int __init omap_init_dma(void) return 0; } - spin_lock_init(&lcd_dma.lock); spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { @@ -2548,22 +2158,6 @@ static int __init omap_init_dma(void) } } - - /* FIXME: Update LCD DMA to work on 24xx */ - if (cpu_class_is_omap1()) { - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, - "LCD DMA", NULL); - if (r != 0) { - int i; - - printk(KERN_ERR "unable to request IRQ for LCD DMA " - "(error %d)\n", r); - for (i = 0; i < dma_chan_count; i++) - free_irq(omap1_dma_irq[i], (void *) (i + 1)); - goto out_free; - } - } - return 0; out_free: diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index c08362dbb8ed..33fff4ef382d 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -80,47 +80,8 @@ static struct platform_device omap_i2c_devices[] = { #endif }; -#if defined(CONFIG_ARCH_OMAP24XX) -static const int omap24xx_pins[][2] = { - { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, - { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, -}; -#else -static const int omap24xx_pins[][2] = {}; -#endif -#if defined(CONFIG_ARCH_OMAP34XX) -static const int omap34xx_pins[][2] = { - { K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA}, - { AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA}, - { AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA}, -}; -#else -static const int omap34xx_pins[][2] = {}; -#endif - #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static void __init omap_i2c_mux_pins(int bus) -{ - int scl, sda; - - if (cpu_class_is_omap1()) { - scl = I2C_SCL; - sda = I2C_SDA; - } else if (cpu_is_omap24xx()) { - scl = omap24xx_pins[bus][0]; - sda = omap24xx_pins[bus][1]; - } else if (cpu_is_omap34xx()) { - scl = omap34xx_pins[bus][0]; - sda = omap34xx_pins[bus][1]; - } else { - return; - } - - omap_cfg_reg(sda); - omap_cfg_reg(scl); -} - static int __init omap_i2c_nr_ports(void) { int ports = 0; @@ -156,7 +117,6 @@ static int __init omap_i2c_add_bus(int bus_id) res[1].start = irq; } - omap_i2c_mux_pins(bus_id - 1); return platform_device_register(pdev); } @@ -209,7 +169,7 @@ out: subsys_initcall(omap_register_i2c_bus_cmdline); /** - * omap_register_i2c_bus - register I2C bus with device descriptors + * omap_plat_register_i2c_bus - register I2C bus with device descriptors * @bus_id: bus id counting from number 1 * @clkrate: clock rate of the bus in kHz * @info: pointer into I2C device descriptor table or NULL @@ -217,7 +177,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline); * * Returns 0 on success or an error code. */ -int __init omap_register_i2c_bus(int bus_id, u32 clkrate, +int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len) { diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index abb17b604f82..376ce18216ff 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -114,15 +114,6 @@ struct omap_pwm_led_platform_data { void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); }; -/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */ -struct omap_gpio_switch_config { - char name[12]; - u16 gpio; - int flags:4; - int type:4; - int key_code:24; /* Linux key code */ -}; - struct omap_uart_config { /* Bit field of UARTs present; bit 0 --> UART1 */ unsigned int enabled_uarts; diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 2f816fe3ae86..32c22272425d 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -27,7 +27,7 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H -#include +#include struct sys_timer; @@ -36,18 +36,6 @@ extern void __iomem *gic_cpu_base_addr; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif /* IO bases for various OMAP processors */ struct omap_globals { diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 2e1789001dfe..9a028bdebb06 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -176,11 +176,13 @@ IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) +IS_OMAP_CLASS(44xx, 0x44) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) +IS_OMAP_SUBCLASS(443x, 0x443) #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 @@ -393,11 +395,11 @@ IS_OMAP_TYPE(3517, 0x3517) (!omap3_has_iva()) && \ (!omap3_has_sgx())) # define cpu_is_omap3515() (cpu_is_omap3430() && \ - (omap3_has_iva()) && \ - (!omap3_has_sgx())) + (!omap3_has_iva()) && \ + (omap3_has_sgx())) # define cpu_is_omap3525() (cpu_is_omap3430() && \ - (omap3_has_sgx()) && \ - (!omap3_has_iva())) + (!omap3_has_sgx()) && \ + (omap3_has_iva())) # define cpu_is_omap3530() (cpu_is_omap3430()) # define cpu_is_omap3505() is_omap3505() # define cpu_is_omap3517() is_omap3517() @@ -408,8 +410,8 @@ IS_OMAP_TYPE(3517, 0x3517) # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x -# define cpu_is_omap44xx() 1 -# define cpu_is_omap443x() 1 +# define cpu_is_omap44xx() is_omap44xx() +# define cpu_is_omap443x() is_omap443x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -436,14 +438,15 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_0 0x36300034 #define OMAP35XX_CLASS 0x35000034 -#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12)) -#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12)) -#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12)) -#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12)) -#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 12)) -#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 12)) +#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) +#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8)) +#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8)) +#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8)) +#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8)) +#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) -#define OMAP443X_CLASS 0x44300034 +#define OMAP443X_CLASS 0x44300044 +#define OMAP4430_REV_ES1_0 0x44300044 /* * omap_chip bits diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 1c017b29b7e9..4ede9e17a0be 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -401,33 +401,6 @@ /*----------------------------------------------------------------------------*/ -/* Hardware registers for LCD DMA */ -#define OMAP1510_DMA_LCD_BASE (0xfffedb00) -#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) -#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) -#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) -#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) -#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) - -#define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) -#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) -#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) -#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) -#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) -#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) -#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) -#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) -#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) -#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) -#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) -#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) -#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) -#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) -#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) -#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) -#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) @@ -441,6 +414,8 @@ #define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) #define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) +#define OMAP_DMA_CCR_EN (1 << 7) + #define OMAP_DMA_DATA_TYPE_S8 0x00 #define OMAP_DMA_DATA_TYPE_S16 0x01 #define OMAP_DMA_DATA_TYPE_S32 0x02 @@ -503,14 +478,6 @@ #define DMA_CH_PRIO_HIGH 0x1 #define DMA_CH_PRIO_LOW 0x0 /* Def */ -/* LCD DMA block numbers */ -enum { - OMAP_LCD_DMA_B1_TOP, - OMAP_LCD_DMA_B1_BOTTOM, - OMAP_LCD_DMA_B2_TOP, - OMAP_LCD_DMA_B2_BOTTOM -}; - enum omap_dma_burst_mode { OMAP_DMA_DATA_BURST_DIS = 0, OMAP_DMA_DATA_BURST_4, @@ -661,20 +628,13 @@ extern int omap_modify_dma_chain_params(int chain_id, extern int omap_dma_chain_status(int chain_id); #endif -/* LCD DMA functions */ -extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data); -extern void omap_free_lcd_dma(void); -extern void omap_setup_lcd_dma(void); -extern void omap_enable_lcd_dma(void); -extern void omap_stop_lcd_dma(void); -extern void omap_set_lcd_dma_ext_controller(int external); -extern void omap_set_lcd_dma_single_transfer(int single); -extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type); -extern void omap_set_lcd_dma_b1_rotation(int rotate); -extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); -extern void omap_set_lcd_dma_b1_mirror(int mirror); -extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) +#include +#else +static inline int omap_lcd_dma_running(void) +{ + return 0; +} +#endif #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 696e0ca051b7..e081338e0b23 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -45,7 +45,7 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) +#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(2) #define GPMC_CONFIG1_MUXADDDATA (1 << 9) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h new file mode 100644 index 000000000000..585d9ca68b97 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -0,0 +1,39 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} +#endif + +int omap_plat_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index ba77de601501..8f069cc80350 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -130,58 +130,11 @@ #define OMAP2_PULL_UP (1 << 4) #define OMAP2_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ -#define OMAP3_INPUT_EN (1 << 8) -#define OMAP3_OFF_EN (1 << 9) -#define OMAP3_OFFOUT_EN (1 << 10) -#define OMAP3_OFFOUT_VAL (1 << 11) -#define OMAP3_OFF_PULL_EN (1 << 12) -#define OMAP3_OFF_PULL_UP (1 << 13) -#define OMAP3_WAKEUP_EN (1 << 14) - -/* 34xx mux mode options for each pin. See TRM for options */ -#define OMAP34XX_MUX_MODE0 0 -#define OMAP34XX_MUX_MODE1 1 -#define OMAP34XX_MUX_MODE2 2 -#define OMAP34XX_MUX_MODE3 3 -#define OMAP34XX_MUX_MODE4 4 -#define OMAP34XX_MUX_MODE5 5 -#define OMAP34XX_MUX_MODE6 6 -#define OMAP34XX_MUX_MODE7 7 - -/* 34xx active pin states */ -#define OMAP34XX_PIN_OUTPUT 0 -#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN -#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ - | OMAP2_PULL_UP) -#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) - -/* 34xx off mode states */ -#define OMAP34XX_PIN_OFF_NONE 0 -#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ - | OMAP3_OFFOUT_VAL) -#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) -#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ - | OMAP3_OFF_PULL_UP) -#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) -#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN - -#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ - .name = desc, \ - .debug = 0, \ - .mux_reg = reg_offset, \ - .mux_val = mux_value \ -}, - struct pin_config { char *name; const unsigned int mux_reg; unsigned char debug; -#if defined(CONFIG_ARCH_OMAP34XX) - u16 mux_val; /* Wake-up, off mode, pull, mux mode */ -#endif - #if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) const unsigned char mask_offset; const unsigned char mask; @@ -219,11 +172,17 @@ enum omap7xx_index { AA17_7XX_USB_DM, W16_7XX_USB_PU_EN, W17_7XX_USB_VBUSI, + W18_7XX_USB_DMCK_OUT, + W19_7XX_USB_DCRST, /* MMC */ MMC_7XX_CMD, MMC_7XX_CLK, MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, }; enum omap1xxx_index { @@ -681,181 +640,6 @@ enum omap24xx_index { }; -enum omap34xx_index { - /* 34xx I2C */ - K21_34XX_I2C1_SCL, - J21_34XX_I2C1_SDA, - AF15_34XX_I2C2_SCL, - AE15_34XX_I2C2_SDA, - AF14_34XX_I2C3_SCL, - AG14_34XX_I2C3_SDA, - AD26_34XX_I2C4_SCL, - AE26_34XX_I2C4_SDA, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ - Y8_3430_USB1HS_PHY_CLK, - Y9_3430_USB1HS_PHY_STP, - AA14_3430_USB1HS_PHY_DIR, - AA11_3430_USB1HS_PHY_NXT, - W13_3430_USB1HS_PHY_DATA0, - W12_3430_USB1HS_PHY_DATA1, - W11_3430_USB1HS_PHY_DATA2, - Y11_3430_USB1HS_PHY_DATA3, - W9_3430_USB1HS_PHY_DATA4, - Y12_3430_USB1HS_PHY_DATA5, - W8_3430_USB1HS_PHY_DATA6, - Y13_3430_USB1HS_PHY_DATA7, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ - AA8_3430_USB2HS_PHY_CLK, - AA10_3430_USB2HS_PHY_STP, - AA9_3430_USB2HS_PHY_DIR, - AB11_3430_USB2HS_PHY_NXT, - AB10_3430_USB2HS_PHY_DATA0, - AB9_3430_USB2HS_PHY_DATA1, - W3_3430_USB2HS_PHY_DATA2, - T4_3430_USB2HS_PHY_DATA3, - T3_3430_USB2HS_PHY_DATA4, - R3_3430_USB2HS_PHY_DATA5, - R4_3430_USB2HS_PHY_DATA6, - T2_3430_USB2HS_PHY_DATA7, - - - /* TLL - HSUSB: 12-pin TLL Port 1*/ - Y8_3430_USB1HS_TLL_CLK, - Y9_3430_USB1HS_TLL_STP, - AA14_3430_USB1HS_TLL_DIR, - AA11_3430_USB1HS_TLL_NXT, - W13_3430_USB1HS_TLL_DATA0, - W12_3430_USB1HS_TLL_DATA1, - W11_3430_USB1HS_TLL_DATA2, - Y11_3430_USB1HS_TLL_DATA3, - W9_3430_USB1HS_TLL_DATA4, - Y12_3430_USB1HS_TLL_DATA5, - W8_3430_USB1HS_TLL_DATA6, - Y13_3430_USB1HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 2*/ - AA8_3430_USB2HS_TLL_CLK, - AA10_3430_USB2HS_TLL_STP, - AA9_3430_USB2HS_TLL_DIR, - AB11_3430_USB2HS_TLL_NXT, - AB10_3430_USB2HS_TLL_DATA0, - AB9_3430_USB2HS_TLL_DATA1, - W3_3430_USB2HS_TLL_DATA2, - T4_3430_USB2HS_TLL_DATA3, - T3_3430_USB2HS_TLL_DATA4, - R3_3430_USB2HS_TLL_DATA5, - R4_3430_USB2HS_TLL_DATA6, - T2_3430_USB2HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 3*/ - AA6_3430_USB3HS_TLL_CLK, - AB3_3430_USB3HS_TLL_STP, - AA3_3430_USB3HS_TLL_DIR, - Y3_3430_USB3HS_TLL_NXT, - AA5_3430_USB3HS_TLL_DATA0, - Y4_3430_USB3HS_TLL_DATA1, - Y5_3430_USB3HS_TLL_DATA2, - W5_3430_USB3HS_TLL_DATA3, - AB12_3430_USB3HS_TLL_DATA4, - AB13_3430_USB3HS_TLL_DATA5, - AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7, - - /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ - AF10_3430_USB1FS_PHY_MM1_RXDP, - AG9_3430_USB1FS_PHY_MM1_RXDM, - W13_3430_USB1FS_PHY_MM1_RXRCV, - W12_3430_USB1FS_PHY_MM1_TXSE0, - W11_3430_USB1FS_PHY_MM1_TXDAT, - Y11_3430_USB1FS_PHY_MM1_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ - AF7_3430_USB2FS_PHY_MM2_RXDP, - AH7_3430_USB2FS_PHY_MM2_RXDM, - AB10_3430_USB2FS_PHY_MM2_RXRCV, - AB9_3430_USB2FS_PHY_MM2_TXSE0, - W3_3430_USB2FS_PHY_MM2_TXDAT, - T4_3430_USB2FS_PHY_MM2_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ - AH3_3430_USB3FS_PHY_MM3_RXDP, - AE3_3430_USB3FS_PHY_MM3_RXDM, - AD1_3430_USB3FS_PHY_MM3_RXRCV, - AE1_3430_USB3FS_PHY_MM3_TXSE0, - AD2_3430_USB3FS_PHY_MM3_TXDAT, - AC1_3430_USB3FS_PHY_MM3_TXEN_N, - - /* 34xx GPIO - * - normally these are bidirectional, no internal pullup/pulldown - * - "_UP" suffix (GPIO3_UP) if internal pullup is configured - * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown - * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) - */ - AF26_34XX_GPIO0, - AF22_34XX_GPIO9, - AG9_34XX_GPIO23, - AH8_34XX_GPIO29, - U8_34XX_GPIO54_OUT, - U8_34XX_GPIO54_DOWN, - L8_34XX_GPIO63, - G25_34XX_GPIO86_OUT, - AG4_34XX_GPIO134_OUT, - AF4_34XX_GPIO135_OUT, - AE4_34XX_GPIO136_OUT, - AF6_34XX_GPIO140_UP, - AE6_34XX_GPIO141, - AF5_34XX_GPIO142, - AE5_34XX_GPIO143, - H19_34XX_GPIO164_OUT, - J25_34XX_GPIO170, - - /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ - H16_34XX_SDRC_CKE0, - H17_34XX_SDRC_CKE1, - - /* MMC1 */ - N28_3430_MMC1_CLK, - M27_3430_MMC1_CMD, - N27_3430_MMC1_DAT0, - N26_3430_MMC1_DAT1, - N25_3430_MMC1_DAT2, - P28_3430_MMC1_DAT3, - P27_3430_MMC1_DAT4, - P26_3430_MMC1_DAT5, - R27_3430_MMC1_DAT6, - R25_3430_MMC1_DAT7, - - /* MMC2 */ - AE2_3430_MMC2_CLK, - AG5_3430_MMC2_CMD, - AH5_3430_MMC2_DAT0, - AH4_3430_MMC2_DAT1, - AG4_3430_MMC2_DAT2, - AF4_3430_MMC2_DAT3, - AE4_3430_MMC2_DAT4, - AH3_3430_MMC2_DAT5, - AF3_3430_MMC2_DAT6, - AE3_3430_MMC2_DAT7, - - /* MMC3 */ - AF10_3430_MMC3_CLK, - AC3_3430_MMC3_CMD, - AE11_3430_MMC3_DAT0, - AH9_3430_MMC3_DAT1, - AF13_3430_MMC3_DAT2, - AF13_3430_MMC3_DAT3, - - /* SYS_NIRQ T2 INT1 */ - AF26_34XX_SYS_NIRQ, - - /* EHCI GPIO's for OMAP3EVM (Rev >= E) */ - AH14_34XX_GPIO21, - AF9_34XX_GPIO22, - U3_34XX_GPIO61, -}; - struct omap_mux_cfg { struct pin_config *pins; unsigned long size; @@ -865,14 +649,14 @@ struct omap_mux_cfg { #ifdef CONFIG_OMAP_MUX /* setup pin muxing in Linux */ extern int omap1_mux_init(void); -extern int omap2_mux_init(void); extern int omap_mux_register(struct omap_mux_cfg *); extern int omap_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } #endif +extern int omap2_mux_init(void); + #endif diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 9951345a25d6..f5a4a92393ef 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -53,6 +53,7 @@ #ifndef __ASSEMBLER__ extern void __init omap_serial_early_init(void); extern void omap_serial_init(void); +extern void omap_serial_init_port(int port); extern int omap_uart_can_sleep(void); extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index dcaa8fde7063..8983d54c4fd2 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -28,6 +28,8 @@ /* Needed for secondary core boot */ extern void omap_secondary_startup(void); +extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); +extern void omap_auxcoreboot_addr(u32 cpu_addr); /* * We use Soft IRQ1 as the IPI diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 05aebcad215b..06703635ace1 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index) { struct pin_config *reg; - if (cpu_is_omap44xx()) - return 0; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n", + index); + WARN_ON(1); + return -EINVAL; + } if (mux_cfg == NULL) { printk(KERN_ERR "Pin mux table not initialized\n"); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index ad2bf07d30b5..d8d5094b37ed 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -48,8 +48,10 @@ #define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) -#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ -#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/ +#define OMAP4_SRAM_PA 0x40300000 +#define OMAP4_SRAM_VA 0xfe400000 +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 @@ -140,6 +142,10 @@ void __init omap_detect_sram(void) } else { omap_sram_size = 0x8000; /* 32K */ } + } else if (cpu_is_omap44xx()) { + omap_sram_base = OMAP4_SRAM_PUB_VA; + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; @@ -153,7 +159,7 @@ void __init omap_detect_sram(void) } else if (cpu_is_omap44xx()) { omap_sram_base = OMAP4_SRAM_VA; omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0x8000; /* 32K */ + omap_sram_size = 0xe000; /* 56K */ } else { omap_sram_base = OMAP2_SRAM_VA; omap_sram_start = OMAP2_SRAM_PA; diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 51033a4503c3..d3bf17cd36f3 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -137,7 +137,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) if (is_device) { if (cpu_is_omap24xx()) omap_cfg_reg(J20_24XX_USB0_PUEN); - else + else if (cpu_is_omap7xx()) { + omap_cfg_reg(AA17_7XX_USB_DM); + omap_cfg_reg(W16_7XX_USB_PU_EN); + omap_cfg_reg(W17_7XX_USB_VBUSI); + omap_cfg_reg(W18_7XX_USB_DMCK_OUT); + omap_cfg_reg(W19_7XX_USB_DCRST); + } else omap_cfg_reg(W4_USB_PUEN); } diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 7815bfc300f5..54799544bda3 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -206,21 +206,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) } } -#elif defined(CONFIG_ARCH_OMAP) - -/* We can only do 16-bit reads and writes in the static memory space. */ -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_IO_SHIFT 0 -#define SMC_NOWAIT 1 - -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) -#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -#define SMC_IRQ_FLAGS (-1) /* from resource */ - #elif defined(CONFIG_SH_SH4202_MICRODEV) #define SMC_CAN_USE_8BIT 0 diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index b831e1df629e..a33483910dc8 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -29,6 +29,7 @@ #include #include +#include #include #include @@ -39,38 +40,6 @@ #define MODULE_NAME "lcdc" -#define OMAP_LCDC_BASE 0xfffec000 -#define OMAP_LCDC_SIZE 256 -#define OMAP_LCDC_IRQ INT_LCD_CTRL - -#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00) -#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04) -#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08) -#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c) -#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10) -#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14) -#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18) -#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c) - -#define OMAP_LCDC_STAT_DONE (1 << 0) -#define OMAP_LCDC_STAT_VSYNC (1 << 1) -#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2) -#define OMAP_LCDC_STAT_ABC (1 << 3) -#define OMAP_LCDC_STAT_LINE_INT (1 << 4) -#define OMAP_LCDC_STAT_FUF (1 << 5) -#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6) - -#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) -#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7) -#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10) - -#define OMAP_LCDC_IRQ_VSYNC (1 << 2) -#define OMAP_LCDC_IRQ_DONE (1 << 3) -#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4) -#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5) -#define OMAP_LCDC_IRQ_LINE (1 << 6) -#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2) - #define MAX_PALETTE_SIZE PAGE_SIZE enum lcdc_load_mode {