ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB

This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2024-11-10 14:11:52 +00:00 · 2016-06-02 14:10:16 +02:00 · 2016-06-02 14:10:16 +02:00 · 5c34a4e89c
commit 5c34a4e89c
parent 0c2b4504b0
33 changed files with 52 additions and 55 deletions
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -327,7 +327,6 @@ choice
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
 	depends on MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
@ -342,7 +341,6 @@ config ARCH_MULTIPLATFORM
 config ARM_SINGLE_ARMV7M
 	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
 	depends on !MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_NVIC
 	select AUTO_ZRELADDR
 	select CLKSRC_OF
@ -356,12 +354,12 @@ config ARM_SINGLE_ARMV7M

 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MFD_SYSCON
 	select SOC_BUS
 	help
@ -369,10 +367,10 @@ config ARCH_CLPS711X

 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_FA526
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  Support for the Cortina Systems Gemini family SoCs

@ -393,7 +391,6 @@ config ARCH_EBSA110
 config ARCH_EP93XX
 	bool "EP93xx-based"
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
@ -402,6 +399,7 @@ config ARCH_EP93XX
 	select CLKSRC_MMIO
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.

@ -442,9 +440,9 @@ config ARCH_IOP13XX
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
+	select GPIOLIB
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@ -455,9 +453,9 @@ config ARCH_IOP32X
 config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
+	select GPIOLIB
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@ -468,12 +466,12 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
 	select USB_EHCI_BIG_ENDIAN_DESC
@ -483,9 +481,9 @@ config ARCH_IXP4XX

 config ARCH_DOVE
 	bool "Marvell Dove"
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
@ -499,10 +497,10 @@ config ARCH_DOVE

 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_ARM922T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
@ -510,11 +508,11 @@ config ARCH_KS8695

 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
 	  At present, the w90x900 has been renamed nuc900, regarding
@ -526,13 +524,13 @@ config ARCH_W90X900

 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKDEV_LOOKUP
 	select CLKSRC_LPC32XX
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
@ -543,7 +541,6 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select AUTO_ZRELADDR
 	select COMMON_CLK
@ -554,6 +551,7 @@ config ARCH_PXA
 	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
@ -584,7 +582,6 @@ config ARCH_RPC
 config ARCH_SA1100
 	bool "SA1100-based"
 	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
@ -593,6 +590,7 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select ISA
@ -604,12 +602,12 @@ config ARCH_SA1100

 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
-	select ARCH_REQUIRE_GPIOLIB
 	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@ -625,12 +623,12 @@ config ARCH_S3C24XX
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CPU_ARM926T
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select HAVE_IDE
 	select USE_OF
 	select ZONE_DMA
@ -642,11 +640,11 @@ config ARCH_OMAP1
 	depends on MMU
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
@ -868,7 +866,7 @@ source "arch/arm/mach-zynq/Kconfig"
 config ARCH_EFM32
 	bool "Energy Micro efm32"
 	depends on ARM_SINGLE_ARMV7M
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
 	  processors.
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@ -1,8 +1,8 @@
 menuconfig ARCH_AT91
 	bool "Atmel SoCs"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_AT91
+	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS

--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@ -17,7 +17,7 @@ config ARCH_BCM_IPROC
 	select ARM_GLOBAL_TIMER
 	select COMMON_CLK_IPROC
 	select CLKSRC_MMIO
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
 	help
@ -80,7 +80,7 @@ comment "KONA architected SoCs"

 config ARCH_BCM_MOBILE
 	bool
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_GIC
@ -137,7 +137,7 @@ comment "Other Architectures"
 config ARCH_BCM2835
 	bool "Broadcom BCM2835 family"
 	depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
 	select ARM_TIMER_SP804
@ -176,7 +176,6 @@ config ARCH_BRCMSTB
 	select BRCMSTB_L2_IRQ
 	select BCM7120_L2_IRQ
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select SOC_BRCMSTB
 	select SOC_BUS
 	help
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@ -2,11 +2,11 @@ menuconfig ARCH_BERLIN
 	bool "Marvell Berlin SoCs"
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select DW_APB_ICTL
 	select DW_APB_TIMER_OF
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MFD_SYSCON
 	select PINCTRL

--- a/arch/arm/mach-digicolor/Kconfig
+++ b/arch/arm/mach-digicolor/Kconfig
@ -1,10 +1,10 @@
 config ARCH_DIGICOLOR
 	bool "Conexant Digicolor SoC Support"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select DIGICOLOR_TIMER
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MFD_SYSCON
 	select PINCTRL
 	select PINCTRL_DIGICOLOR
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@ -12,13 +12,13 @@ menuconfig ARCH_EXYNOS
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select COMMON_CLK_SAMSUNG
 	select EXYNOS_THERMAL
 	select EXYNOS_PMU
 	select EXYNOS_SROM
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@ -1,10 +1,10 @@
 menuconfig ARCH_MXC
 	bool "Freescale i.MX family"
 	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select PINCTRL
 	select PM_OPP if PM
 	select SOC_BUS
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@ -32,9 +32,9 @@ config ARCH_INTEGRATOR_AP
 config INTEGRATOR_IMPD1
 	bool "Include support for Integrator/IM-PD1"
 	depends on ARCH_INTEGRATOR_AP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
-	select GPIO_PL061 if GPIOLIB
+	select GPIO_PL061
+	select GPIOLIB
 	help
 	  The IM-PD1 is an add-on logic module for the Integrator which
 	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@ -1,7 +1,7 @@
 menuconfig ARCH_MESON
 	bool "Amlogic Meson SoCs"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select ARM_GIC
 	select CACHE_L2X0
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@ -1,8 +1,8 @@
 menuconfig ARCH_MMP
 	bool "Marvell PXA168/910/MMP2"
 	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select GPIO_PXA
+	select GPIOLIB
 	select PINCTRL
 	select PLAT_PXA
 	help
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@ -5,7 +5,7 @@ menuconfig ARCH_MOXART
 	select ARM_DMA_MEM_BUFFERABLE
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PHYLIB if NETDEVICES
 	help
 	  Say Y here if you want to run your kernel on hardware with a
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@ -1,8 +1,8 @@
 menuconfig ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
+	select GPIOLIB
 	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@ -8,7 +8,7 @@ menuconfig ARCH_MVEBU
 	select SOC_BUS
 	select MVEBU_MBUS
 	select ZONE_DMA if ARM_LPAE
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PCI_QUIRKS if PCI
 	select OF_ADDRESS_PCI

@ -119,8 +119,8 @@ config MACH_DOVE
 config MACH_KIRKWOOD
 	bool "Marvell Kirkwood boards"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
+	select GPIOLIB
 	select KIRKWOOD_CLK
 	select MACH_MVEBU_ANY
 	select ORION_IRQCHIP
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@ -15,8 +15,8 @@ config SOC_IMX28
 config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
+	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS
 	select SOC_IMX23
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@ -1,12 +1,12 @@
 menuconfig ARCH_NOMADIK
 	bool "ST-Ericsson Nomadik"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_NOMADIK_MTU
 	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	select CPU_ARM926T
+	select GPIOLIB
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@ -88,9 +88,9 @@ config ARCH_OMAP2PLUS
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MACH_OMAP_GENERIC
 	select MEMORY
 	select MFD_SYSCON
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@ -1,9 +1,9 @@
 menuconfig ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU && ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY
--- a/arch/arm/mach-oxnas/Kconfig
+++ b/arch/arm/mach-oxnas/Kconfig
@ -1,7 +1,7 @@
 menuconfig ARCH_OXNAS
 	bool "Oxford Semiconductor OXNAS Family SoCs"
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_RESET_CONTROLLER
+	select GPIOLIB
 	select PINCTRL
 	depends on ARCH_MULTI_V5
 	help
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@ -1,8 +1,8 @@
 config ARCH_PICOXCELL
 	bool "Picochip PicoXcell"
 	depends on ARCH_MULTI_V6
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select DW_APB_TIMER_OF
+	select GPIOLIB
 	select HAVE_TCM
 	select NO_IOPORT_MAP
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@ -3,8 +3,8 @@ menuconfig ARCH_SIRF
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select NO_IOPORT_MAP
 	select REGMAP
 	select PINCTRL
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@ -4,10 +4,10 @@ config ARCH_ROCKCHIP
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
+	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@ -11,7 +11,7 @@ if ARCH_S3C24XX

 config PLAT_S3C24XX
 	def_bool y
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select NO_IOPORT_MAP
 	select S3C_DEV_NAND
 	select IRQ_DOMAIN
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@ -5,12 +5,12 @@
 menuconfig ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	depends on ARCH_MULTI_V6
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK_SAMSUNG
 	select GPIO_SAMSUNG if ATAGS
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@ -11,10 +11,10 @@ config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK_SAMSUNG
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@ -41,7 +41,7 @@ menuconfig ARCH_RENESAS
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select NO_IOPORT_MAP
 	select PINCTRL
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ZONE_DMA if ARM_LPAE

 if ARCH_RENESAS
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@ -5,9 +5,9 @@
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family"
 	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
+	select GPIOLIB

 if PLAT_SPEAR

--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@ -10,7 +10,7 @@ menuconfig ARCH_STI
 	select MFD_SYSCON
 	select ARCH_HAS_RESET_CONTROLLER
 	select HAVE_ARM_SCU if SMP
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@ -1,10 +1,10 @@
 menuconfig ARCH_SUNXI
 	bool "Allwinner SoCs"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select PINCTRL
 	select SUN4I_TIMER
 	select RESET_CONTROLLER
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@ -1,11 +1,11 @@
 menuconfig ARCH_TEGRA
 	bool "NVIDIA Tegra"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
 	select ARM_AMBA
 	select ARM_GIC
 	select CLKSRC_MMIO
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@ -1,11 +1,11 @@
 menuconfig ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on ARCH_MULTI_V5 && MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_MMIO
 	select CPU_ARM926T
+	select GPIOLIB
 	select HAVE_TCM
 	select PINCTRL
 	select PINCTRL_COH901
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@ -3,13 +3,13 @@ menuconfig ARCH_U8500
 	depends on ARCH_MULTI_V7 && MMU
 	select AB8500_CORE
 	select ABX500_CORE
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CACHE_L2X0
 	select CLKSRC_NOMADIK_MTU
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@ -1,13 +1,13 @@
 menuconfig ARCH_VEXPRESS
 	bool "ARM Ltd. Versatile Express family"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select ARM_TIMER_SP804
 	select COMMON_CLK_VERSATILE
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@ -1,6 +1,6 @@
 config ARCH_VT8500
 	bool
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select CLKDEV_LOOKUP
 	select VT8500_TIMER
 	select PINCTRL