Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs

Include the AD714x SPI/I2C resources based on what is possible.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
Mike Frysinger 2009-10-12 15:56:58 +00:00
parent 1d23dc89f2
commit 5b7c57751e

View File

@ -515,7 +515,7 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
};
#endif
#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
#include <linux/input.h>
#include <linux/input/ad714x.h>
static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
@ -523,7 +523,7 @@ static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
.bits_per_word = 16,
};
static struct ad714x_slider_plat slider_plat[] = {
static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
{
.start_stage = 0,
.end_stage = 7,
@ -531,7 +531,7 @@ static struct ad714x_slider_plat slider_plat[] = {
},
};
static struct ad714x_button_plat button_plat[] = {
static struct ad714x_button_plat ad7147_spi_button_plat[] = {
{
.keycode = BTN_FORWARD,
.l_mask = 0,
@ -558,11 +558,11 @@ static struct ad714x_button_plat button_plat[] = {
.h_mask = 0x400,
},
};
static struct ad714x_platform_data ad7147_platfrom_data = {
static struct ad714x_platform_data ad7147_spi_platform_data = {
.slider_num = 1,
.button_num = 5,
.slider = slider_plat,
.button = button_plat,
.slider = ad7147_spi_slider_plat,
.button = ad7147_spi_button_plat,
.stage_cfg_reg = {
{0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
{0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
@ -581,10 +581,10 @@ static struct ad714x_platform_data ad7147_platfrom_data = {
};
#endif
#if defined(CONFIG_INPUT_EVAL_AD7142EB)
#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
#include <linux/input.h>
#include <linux/input/ad714x.h>
static struct ad714x_button_plat button_plat[] = {
static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
{
.keycode = BTN_1,
.l_mask = 0,
@ -606,9 +606,9 @@ static struct ad714x_button_plat button_plat[] = {
.h_mask = 0x8,
},
};
static struct ad714x_platform_data ad7142_platfrom_data = {
static struct ad714x_platform_data ad7142_i2c_platform_data = {
.button_num = 4,
.button = button_plat,
.button = ad7142_i2c_button_plat,
.stage_cfg_reg = {
/* fixme: figure out right setting for all comoponent according
* to hardware feature of EVAL-AD7142EB board */
@ -861,7 +861,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
{
.modalias = "ad714x_captouch",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
@ -869,7 +869,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.bus_num = 0,
.chip_select = 5,
.mode = SPI_MODE_3,
.platform_data = &ad7147_platfrom_data,
.platform_data = &ad7147_spi_platform_data,
.controller_data = &ad7147_spi_chip_info,
},
#endif
@ -1402,11 +1402,11 @@ static struct adp5588_gpio_platform_data adp5588_gpio_data = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_INPUT_EVAL_AD7142EB)
#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
{
I2C_BOARD_INFO("ad7142_captouch", 0x2C),
.irq = IRQ_PG5,
.platform_data = (void *)&ad7142_platfrom_data,
.platform_data = (void *)&ad7142_i2c_platform_data,
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)