asm-generic: merge branch 'master' of torvalds/linux-2.6

Fixes a merge conflict against the x86 tree caused by a fix to
atomic.h which I renamed to atomic_long.h.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/ABI/testing/sysfs-block

@@ -60,3 +60,62 @@ Description:
 		Indicates whether the block layer should automatically
 		generate checksums for write requests bound for
 		devices that support receiving integrity metadata.
+
+What:		/sys/block/<disk>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the device is
+		offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/<partition>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the partition
+		is offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/queue/logical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit the storage device can
+		address.  It is typically 512 bytes.
+
+What:		/sys/block/<disk>/queue/physical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit the storage device can write
+		without resorting to read-modify-write operation.  It is
+		usually the same as the logical block size but may be
+		bigger.  One example is SATA drives with 4KB sectors
+		that expose a 512-byte logical block size to the
+		operating system.
+
+What:		/sys/block/<disk>/queue/minimum_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a preferred minimum I/O size,
+		which is the smallest request the device can perform
+		without incurring a read-modify-write penalty.  For disk
+		drives this is often the physical block size.  For RAID
+		arrays it is often the stripe chunk size.
+
+What:		/sys/block/<disk>/queue/optimal_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report an optimal I/O size, which is
+		the device's preferred unit of receiving I/O.  This is
+		rarely reported for disk drives.  For RAID devices it is
+		usually the stripe width or the internal block size.

Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -0,0 +1,33 @@
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/model
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 model for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/rev
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 revision for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 83 serial number for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 vendor for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	A symbolic link to /sys/block/cciss!cXdY

Documentation/ABI/testing/sysfs-devices-cache_disable

@@ -0,0 +1,18 @@
+What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date:      August 2008
+KernelVersion:	2.6.27
+Contact:	mark.langsdorf@amd.com
+Description:	These files exist in every cpu's cache index directories.
+		There are currently 2 cache_disable_# files in each
+		directory.  Reading from these files on a supported
+		processor will return that cache disable index value
+		for that processor and node.  Writing to one of these
+		files will cause the specificed cache index to be disabled.
+
+		Currently, only AMD Family 10h Processors support cache index
+		disable, and only for their L3 caches.  See the BIOS and
+		Kernel Developer's Guide at
+		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		for formatting information and other details on the
+		cache index disable.
+Users:    joachim.deguara@amd.com

Documentation/DMA-API.txt

@@ -704,12 +704,24 @@ this directory the following files can currently be found:
 				The current number of free dma_debug_entries
 				in the allocator.
 
+	dma-api/driver-filter
+				You can write a name of a driver into this file
+				to limit the debug output to requests from that
+				particular driver. Write an empty string to
+				that file to disable the filter and see
+				all errors again.
+
 If you have this code compiled into your kernel it will be enabled by default.
 If you want to boot without the bookkeeping anyway you can provide
 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
 Notice that you can not enable it again at runtime. You have to reboot to do
 so.
 
+If you want to see debug messages only for a special device driver you can
+specify the dma_debug_driver=<drivername> parameter. This will enable the
+driver filter at boot time. The debug code will only print errors for that
+driver afterwards. This filter can be disabled or changed later using debugfs.
+
 When the code disables itself at runtime this is most likely because it ran
 out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you

Documentation/DocBook/Makefile

@@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
-	    alsa-driver-api.xml writing-an-alsa-driver.xml
+	    alsa-driver-api.xml writing-an-alsa-driver.xml \
+	    tracepoint.xml
 
 ###
 # The build process is as follows (targets):

Documentation/DocBook/tracepoint.tmpl

@@ -0,0 +1,89 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="Tracepoints">
+ <bookinfo>
+  <title>The Linux Kernel Tracepoint API</title>
+
+  <authorgroup>
+   <author>
+    <firstname>Jason</firstname>
+    <surname>Baron</surname>
+    <affiliation>
+     <address>
+      <email>jbaron@redhat.com</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+  <chapter id="intro">
+   <title>Introduction</title>
+   <para>
+     Tracepoints are static probe points that are located in strategic points
+     throughout the kernel. 'Probes' register/unregister with tracepoints
+     via a callback mechanism. The 'probes' are strictly typed functions that
+     are passed a unique set of parameters defined by each tracepoint.
+   </para>
+
+   <para>
+     From this simple callback mechanism, 'probes' can be used to profile, debug,
+     and understand kernel behavior. There are a number of tools that provide a
+     framework for using 'probes'. These tools include Systemtap, ftrace, and
+     LTTng.
+   </para>
+
+   <para>
+     Tracepoints are defined in a number of header files via various macros. Thus,
+     the purpose of this document is to provide a clear accounting of the available
+     tracepoints. The intention is to understand not only what tracepoints are
+     available but also to understand where future tracepoints might be added.
+   </para>
+
+   <para>
+     The API presented has functions of the form:
+     <function>trace_tracepointname(function parameters)</function>. These are the
+     tracepoints callbacks that are found throughout the code. Registering and
+     unregistering probes with these callback sites is covered in the
+     <filename>Documentation/trace/*</filename> directory.
+   </para>
+  </chapter>
+
+  <chapter id="irq">
+   <title>IRQ</title>
+!Iinclude/trace/events/irq.h
+  </chapter>
+
+</book>

Documentation/RCU/trace.txt

@@ -192,23 +192,24 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
 The output of "cat rcu/rcudata" looks as follows:
 
 rcu:
-  0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10
-  1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10
-  2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10
-  3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10
-  4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10
-  5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10
-  6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10
-  7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10
+rcu:
+  0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
+  1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
+  2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
+  3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
+  4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
+  5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
+  6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
+  7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
 rcu_bh:
-  0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10
-  1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10
-  2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10
-  3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10
-  4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
-  5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
-  6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
-  7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
+  0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
+  1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
+  2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
+  4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
 
 The first section lists the rcu_data structures for rcu, the second for
 rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
@@ -253,12 +254,6 @@ o	"pqc" indicates which grace period the last-observed quiescent
 o	"qp" indicates that RCU still expects a quiescent state from
 	this CPU.
 
-o	"rpfq" is the number of rcu_pending() calls on this CPU required
-	to induce this CPU to invoke force_quiescent_state().
-
-o	"rp" is low-order four hex digits of the count of how many times
-	rcu_pending() has been invoked on this CPU.
-
 o	"dt" is the current value of the dyntick counter that is incremented
 	when entering or leaving dynticks idle state, either by the
 	scheduler or by irq.  The number after the "/" is the interrupt
@@ -305,6 +300,9 @@ o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.
 
+There is also an rcu/rcudata.csv file with the same information in
+comma-separated-variable spreadsheet format.
+
 
 The output of "cat rcu/rcugp" looks as follows:
 
@@ -411,3 +409,63 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		For example, the first entry at the lowest level shows
 		"^0", indicating that it corresponds to bit zero in
 		the first entry at the middle level.
+
+
+The output of "cat rcu/rcu_pending" looks as follows:
+
+rcu:
+  0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
+  1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
+  2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
+  3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
+  4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
+  5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
+  6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
+  7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
+rcu_bh:
+  0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
+  1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
+  2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
+  3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
+  4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
+  5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
+  6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
+  7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
+
+As always, this is once again split into "rcu" and "rcu_bh" portions.
+The fields are as follows:
+
+o	"np" is the number of times that __rcu_pending() has been invoked
+	for the corresponding flavor of RCU.
+
+o	"qsp" is the number of times that the RCU was waiting for a
+	quiescent state from this CPU.
+
+o	"cbr" is the number of times that this CPU had RCU callbacks
+	that had passed through a grace period, and were thus ready
+	to be invoked.
+
+o	"cng" is the number of times that this CPU needed another
+	grace period while RCU was idle.
+
+o	"gpc" is the number of times that an old grace period had
+	completed, but this CPU was not yet aware of it.
+
+o	"gps" is the number of times that a new grace period had started,
+	but this CPU was not yet aware of it.
+
+o	"nf" is the number of times that this CPU suspected that the
+	current grace period had run for too long, and thus needed to
+	be forced.
+
+	Please note that "forcing" consists of sending resched IPIs
+	to holdout CPUs.  If that CPU really still is in an old RCU
+	read-side critical section, then we really do have to wait for it.
+	The assumption behing "forcing" is that the CPU is not still in
+	an old RCU read-side critical section, but has not yet responded
+	for some other reason.
+
+o	"nn" is the number of times that this CPU needed nothing.  Alert
+	readers will note that the rcu "nn" number for a given CPU very
+	closely matches the rcu_bh "np" number for that same CPU.  This
+	is due to short-circuit evaluation in rcu_pending().

Documentation/Smack.txt

@@ -184,8 +184,9 @@ length. Single character labels using special characters, that being anything
 other than a letter or digit, are reserved for use by the Smack development
 team. Smack labels are unstructured, case sensitive, and the only operation
 ever performed on them is comparison for equality. Smack labels cannot
-contain unprintable characters or the "/" (slash) character. Smack labels
-cannot begin with a '-', which is reserved for special options.
+contain unprintable characters, the "/" (slash), the "\" (backslash), the "'"
+(quote) and '"' (double-quote) characters.
+Smack labels cannot begin with a '-', which is reserved for special options.
 
 There are some predefined labels:
 
@@ -523,3 +524,18 @@ Smack supports some mount options:
 
 These mount options apply to all file system types.
 
+Smack auditing
+
+If you want Smack auditing of security events, you need to set CONFIG_AUDIT
+in your kernel configuration.
+By default, all denied events will be audited. You can change this behavior by
+writing a single character to the /smack/logging file :
+0 : no logging
+1 : log denied (default)
+2 : log accepted
+3 : log denied & accepted
+
+Events are logged as 'key=value' pairs, for each event you at least will get
+the subjet, the object, the rights requested, the action, the kernel function
+that triggered the event, plus other pairs depending on the type of event
+audited.

Documentation/block/biodoc.txt

@@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
 do not have a corresponding kernel virtual address space mapping) and
 low-memory pages.
 
-Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
+Note: Please refer to Documentation/DMA-mapping.txt for a discussion
 on PCI high mem DMA aspects and mapping of scatter gather lists, and support
 for 64 bit PCI.
 

Documentation/filesystems/gfs2-glocks.txt

@@ -60,7 +60,7 @@ go_lock          | Called for the first local holder of a lock
 go_unlock        | Called on the final local unlock of a lock
 go_dump          | Called to print content of object for debugfs file, or on
                  | error to dump glock to the log.
-go_type;         | The type of the glock, LM_TYPE_.....
+go_type          | The type of the glock, LM_TYPE_.....
 go_min_hold_time | The minimum hold time
 
 The minimum hold time for each lock is the time after a remote lock

Documentation/filesystems/gfs2.txt

@@ -11,18 +11,15 @@ their I/O so file system consistency is maintained.  One of the nifty
 features of GFS is perfect consistency -- changes made to the file system
 on one machine show up immediately on all other machines in the cluster.
 
-GFS uses interchangable inter-node locking mechanisms.  Different lock
-modules can plug into GFS and each file system selects the appropriate
-lock module at mount time.  Lock modules include:
+GFS uses interchangable inter-node locking mechanisms, the currently
+supported mechanisms are:
 
   lock_nolock -- allows gfs to be used as a local file system
 
   lock_dlm -- uses a distributed lock manager (dlm) for inter-node locking
   The dlm is found at linux/fs/dlm/
 
-In addition to interfacing with an external locking manager, a gfs lock
-module is responsible for interacting with external cluster management
-systems.  Lock_dlm depends on user space cluster management systems found
+Lock_dlm depends on user space cluster management systems found
 at the URL above.
 
 To use gfs as a local file system, no external clustering systems are
@@ -31,13 +28,19 @@ needed, simply:
   $ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device
   $ mount -t gfs2 /dev/block_device /dir
 
-GFS2 is not on-disk compatible with previous versions of GFS.
+If you are using Fedora, you need to install the gfs2-utils package
+and, for lock_dlm, you will also need to install the cman package
+and write a cluster.conf as per the documentation.
+
+GFS2 is not on-disk compatible with previous versions of GFS, but it
+is pretty close.
 
 The following man pages can be found at the URL above:
-  gfs2_fsck	to repair a filesystem
+  fsck.gfs2	to repair a filesystem
   gfs2_grow	to expand a filesystem online
   gfs2_jadd	to add journals to a filesystem online
   gfs2_tool	to manipulate, examine and tune a filesystem
   gfs2_quota	to examine and change quota values in a filesystem
+  gfs2_convert	to convert a gfs filesystem to gfs2 in-place
   mount.gfs2	to help mount(8) mount a filesystem
   mkfs.gfs2	to make a filesystem

Documentation/futex-requeue-pi.txt

@@ -0,0 +1,131 @@
+Futex Requeue PI
+----------------
+
+Requeueing of tasks from a non-PI futex to a PI futex requires
+special handling in order to ensure the underlying rt_mutex is never
+left without an owner if it has waiters; doing so would break the PI
+boosting logic [see rt-mutex-desgin.txt] For the purposes of
+brevity, this action will be referred to as "requeue_pi" throughout
+this document.  Priority inheritance is abbreviated throughout as
+"PI".
+
+Motivation
+----------
+
+Without requeue_pi, the glibc implementation of
+pthread_cond_broadcast() must resort to waking all the tasks waiting
+on a pthread_condvar and letting them try to sort out which task
+gets to run first in classic thundering-herd formation.  An ideal
+implementation would wake the highest-priority waiter, and leave the
+rest to the natural wakeup inherent in unlocking the mutex
+associated with the condvar.
+
+Consider the simplified glibc calls:
+
+/* caller must lock mutex */
+pthread_cond_wait(cond, mutex)
+{
+	lock(cond->__data.__lock);
+	unlock(mutex);
+	do {
+	   unlock(cond->__data.__lock);
+	   futex_wait(cond->__data.__futex);
+	   lock(cond->__data.__lock);
+	} while(...)
+	unlock(cond->__data.__lock);
+	lock(mutex);
+}
+
+pthread_cond_broadcast(cond)
+{
+	lock(cond->__data.__lock);
+	unlock(cond->__data.__lock);
+	futex_requeue(cond->data.__futex, cond->mutex);
+}
+
+Once pthread_cond_broadcast() requeues the tasks, the cond->mutex
+has waiters. Note that pthread_cond_wait() attempts to lock the
+mutex only after it has returned to user space.  This will leave the
+underlying rt_mutex with waiters, and no owner, breaking the
+previously mentioned PI-boosting algorithms.
+
+In order to support PI-aware pthread_condvar's, the kernel needs to
+be able to requeue tasks to PI futexes.  This support implies that
+upon a successful futex_wait system call, the caller would return to
+user space already holding the PI futex.  The glibc implementation
+would be modified as follows:
+
+
+/* caller must lock mutex */
+pthread_cond_wait_pi(cond, mutex)
+{
+	lock(cond->__data.__lock);
+	unlock(mutex);
+	do {
+	   unlock(cond->__data.__lock);
+	   futex_wait_requeue_pi(cond->__data.__futex);
+	   lock(cond->__data.__lock);
+	} while(...)
+	unlock(cond->__data.__lock);
+        /* the kernel acquired the the mutex for us */
+}
+
+pthread_cond_broadcast_pi(cond)
+{
+	lock(cond->__data.__lock);
+	unlock(cond->__data.__lock);
+	futex_requeue_pi(cond->data.__futex, cond->mutex);
+}
+
+The actual glibc implementation will likely test for PI and make the
+necessary changes inside the existing calls rather than creating new
+calls for the PI cases.  Similar changes are needed for
+pthread_cond_timedwait() and pthread_cond_signal().
+
+Implementation
+--------------
+
+In order to ensure the rt_mutex has an owner if it has waiters, it
+is necessary for both the requeue code, as well as the waiting code,
+to be able to acquire the rt_mutex before returning to user space.
+The requeue code cannot simply wake the waiter and leave it to
+acquire the rt_mutex as it would open a race window between the
+requeue call returning to user space and the waiter waking and
+starting to run.  This is especially true in the uncontended case.
+
+The solution involves two new rt_mutex helper routines,
+rt_mutex_start_proxy_lock() and rt_mutex_finish_proxy_lock(), which
+allow the requeue code to acquire an uncontended rt_mutex on behalf
+of the waiter and to enqueue the waiter on a contended rt_mutex.
+Two new system calls provide the kernel<->user interface to
+requeue_pi: FUTEX_WAIT_REQUEUE_PI and FUTEX_REQUEUE_CMP_PI.
+
+FUTEX_WAIT_REQUEUE_PI is called by the waiter (pthread_cond_wait()
+and pthread_cond_timedwait()) to block on the initial futex and wait
+to be requeued to a PI-aware futex.  The implementation is the
+result of a high-speed collision between futex_wait() and
+futex_lock_pi(), with some extra logic to check for the additional
+wake-up scenarios.
+
+FUTEX_REQUEUE_CMP_PI is called by the waker
+(pthread_cond_broadcast() and pthread_cond_signal()) to requeue and
+possibly wake the waiting tasks. Internally, this system call is
+still handled by futex_requeue (by passing requeue_pi=1).  Before
+requeueing, futex_requeue() attempts to acquire the requeue target
+PI futex on behalf of the top waiter.  If it can, this waiter is
+woken.  futex_requeue() then proceeds to requeue the remaining
+nr_wake+nr_requeue tasks to the PI futex, calling
+rt_mutex_start_proxy_lock() prior to each requeue to prepare the
+task as a waiter on the underlying rt_mutex.  It is possible that
+the lock can be acquired at this stage as well, if so, the next
+waiter is woken to finish the acquisition of the lock.
+
+FUTEX_REQUEUE_PI accepts nr_wake and nr_requeue as arguments, but
+their sum is all that really matters.  futex_requeue() will wake or
+requeue up to nr_wake + nr_requeue tasks.  It will wake only as many
+tasks as it can acquire the lock for, which in the majority of cases
+should be 0 as good programming practice dictates that the caller of
+either pthread_cond_broadcast() or pthread_cond_signal() acquire the
+mutex prior to making the call. FUTEX_REQUEUE_PI requires that
+nr_wake=1.  nr_requeue should be INT_MAX for broadcast and 0 for
+signal.

Documentation/kernel-parameters.txt

@@ -56,7 +56,6 @@ parameter is applicable:
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
-	KMEMTRACE kmemtrace is enabled.
 	LIBATA  Libata driver is enabled
 	LP	Printer support is enabled.
 	LOOP	Loopback device support is enabled.
@@ -329,11 +328,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				    flushed before they will be reused, which
 				    is a lot of faster
 
-	amd_iommu_size= [HW,X86-64]
-			Define the size of the aperture for the AMD IOMMU
-			driver. Possible values are:
-			'32M', '64M' (default), '128M', '256M', '512M', '1G'
-
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -646,6 +640,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			DMA-API debugging code disables itself because the
 			architectural default is too low.
 
+	dma_debug_driver=<driver_name>
+			With this option the DMA-API debugging driver
+			filter feature can be enabled at boot time. Just
+			pass the driver to filter for as the parameter.
+			The filter can be disabled or changed to another
+			driver later using sysfs.
+
 	dscc4.setup=	[NET]
 
 	dtc3181e=	[HW,SCSI]
@@ -752,12 +753,25 @@ and is between 256 and 4096 characters. It is defined in the file
 			ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
 
 	ftrace=[tracer]
-			[ftrace] will set and start the specified tracer
+			[FTRACE] will set and start the specified tracer
 			as early as possible in order to facilitate early
 			boot debugging.
 
 	ftrace_dump_on_oops
-			[ftrace] will dump the trace buffers on oops.
+			[FTRACE] will dump the trace buffers on oops.
+
+	ftrace_filter=[function-list]
+			[FTRACE] Limit the functions traced by the function
+			tracer at boot up. function-list is a comma separated
+			list of functions. This list can be changed at run
+			time by the set_ftrace_filter file in the debugfs
+			tracing directory. 
+
+	ftrace_notrace=[function-list]
+			[FTRACE] Do not trace the functions specified in
+			function-list. This list can be changed at run time
+			by the set_ftrace_notrace file in the debugfs
+			tracing directory.
 
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
@@ -914,6 +928,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Formt: { "sha1" | "md5" }
 			default: "sha1"
 
+	ima_tcb		[IMA]
+			Load a policy which meets the needs of the Trusted
+			Computing Base.  This means IMA will measure all
+			programs exec'd, files mmap'd for exec, and all files
+			opened for read by uid=0.
+
 	in2000=		[HW,SCSI]
 			See header of drivers/scsi/in2000.c.
 
@@ -1054,15 +1074,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			use the HighMem zone if it exists, and the Normal
 			zone if it does not.
 
-	kmemtrace.enable=	[KNL,KMEMTRACE] Format: { yes | no }
-				Controls whether kmemtrace is enabled
-				at boot-time.
-
-	kmemtrace.subbufs=n	[KNL,KMEMTRACE] Overrides the number of
-			subbufs kmemtrace's relay channel has. Set this
-			higher than default (KMEMTRACE_N_SUBBUFS in code) if
-			you experience buffer overruns.
-
 	kgdboc=		[HW] kgdb over consoles.
 			Requires a tty driver that supports console polling.
 			(only serial suported for now)
@@ -1072,6 +1083,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
+	kmemleak=	[KNL] Boot-time kmemleak enable/disable
+			Valid arguments: on, off
+			Default: on
+
 	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
@@ -1575,6 +1590,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	noinitrd	[RAM] Tells the kernel not to load any configured
 			initial RAM disk.
 
+	nointremap	[X86-64, Intel-IOMMU] Do not enable interrupt
+			remapping.
+
 	nointroute	[IA-64]
 
 	nojitter	[IA64] Disables jitter checking for ITC timers.
@@ -1660,6 +1678,14 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
+	oprofile.cpu_type=	Force an oprofile cpu type
+			This might be useful if you have an older oprofile
+			userland or if you want common events.
+			Format: { archperfmon }
+			archperfmon: [X86] Force use of architectural
+				perfmon on Intel CPUs instead of the
+				CPU specific event set.
+
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
 			See also Documentation/scsi/st.txt.

Documentation/kmemleak.txt

@@ -0,0 +1,142 @@
+Kernel Memory Leak Detector
+===========================
+
+Introduction
+------------
+
+Kmemleak provides a way of detecting possible kernel memory leaks in a
+way similar to a tracing garbage collector
+(http://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors),
+with the difference that the orphan objects are not freed but only
+reported via /sys/kernel/debug/kmemleak. A similar method is used by the
+Valgrind tool (memcheck --leak-check) to detect the memory leaks in
+user-space applications.
+
+Usage
+-----
+
+CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
+thread scans the memory every 10 minutes (by default) and prints any new
+unreferenced objects found. To trigger an intermediate scan and display
+all the possible memory leaks:
+
+  # mount -t debugfs nodev /sys/kernel/debug/
+  # cat /sys/kernel/debug/kmemleak
+
+Note that the orphan objects are listed in the order they were allocated
+and one object at the beginning of the list may cause other subsequent
+objects to be reported as orphan.
+
+Memory scanning parameters can be modified at run-time by writing to the
+/sys/kernel/debug/kmemleak file. The following parameters are supported:
+
+  off		- disable kmemleak (irreversible)
+  stack=on	- enable the task stacks scanning
+  stack=off	- disable the tasks stacks scanning
+  scan=on	- start the automatic memory scanning thread
+  scan=off	- stop the automatic memory scanning thread
+  scan=<secs>	- set the automatic memory scanning period in seconds (0
+		  to disable it)
+
+Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
+the kernel command line.
+
+Basic Algorithm
+---------------
+
+The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and
+friends are traced and the pointers, together with additional
+information like size and stack trace, are stored in a prio search tree.
+The corresponding freeing function calls are tracked and the pointers
+removed from the kmemleak data structures.
+
+An allocated block of memory is considered orphan if no pointer to its
+start address or to any location inside the block can be found by
+scanning the memory (including saved registers). This means that there
+might be no way for the kernel to pass the address of the allocated
+block to a freeing function and therefore the block is considered a
+memory leak.
+
+The scanning algorithm steps:
+
+  1. mark all objects as white (remaining white objects will later be
+     considered orphan)
+  2. scan the memory starting with the data section and stacks, checking
+     the values against the addresses stored in the prio search tree. If
+     a pointer to a white object is found, the object is added to the
+     gray list
+  3. scan the gray objects for matching addresses (some white objects
+     can become gray and added at the end of the gray list) until the
+     gray set is finished
+  4. the remaining white objects are considered orphan and reported via
+     /sys/kernel/debug/kmemleak
+
+Some allocated memory blocks have pointers stored in the kernel's
+internal data structures and they cannot be detected as orphans. To
+avoid this, kmemleak can also store the number of values pointing to an
+address inside the block address range that need to be found so that the
+block is not considered a leak. One example is __vmalloc().
+
+Kmemleak API
+------------
+
+See the include/linux/kmemleak.h header for the functions prototype.
+
+kmemleak_init		 - initialize kmemleak
+kmemleak_alloc		 - notify of a memory block allocation
+kmemleak_free		 - notify of a memory block freeing
+kmemleak_not_leak	 - mark an object as not a leak
+kmemleak_ignore		 - do not scan or report an object as leak
+kmemleak_scan_area	 - add scan areas inside a memory block
+kmemleak_no_scan	 - do not scan a memory block
+kmemleak_erase		 - erase an old value in a pointer variable
+kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness
+kmemleak_free_recursive	 - as kmemleak_free but checks the recursiveness
+
+Dealing with false positives/negatives
+--------------------------------------
+
+The false negatives are real memory leaks (orphan objects) but not
+reported by kmemleak because values found during the memory scanning
+point to such objects. To reduce the number of false negatives, kmemleak
+provides the kmemleak_ignore, kmemleak_scan_area, kmemleak_no_scan and
+kmemleak_erase functions (see above). The task stacks also increase the
+amount of false negatives and their scanning is not enabled by default.
+
+The false positives are objects wrongly reported as being memory leaks
+(orphan). For objects known not to be leaks, kmemleak provides the
+kmemleak_not_leak function. The kmemleak_ignore could also be used if
+the memory block is known not to contain other pointers and it will no
+longer be scanned.
+
+Some of the reported leaks are only transient, especially on SMP
+systems, because of pointers temporarily stored in CPU registers or
+stacks. Kmemleak defines MSECS_MIN_AGE (defaulting to 1000) representing
+the minimum age of an object to be reported as a memory leak.
+
+Limitations and Drawbacks
+-------------------------
+
+The main drawback is the reduced performance of memory allocation and
+freeing. To avoid other penalties, the memory scanning is only performed
+when the /sys/kernel/debug/kmemleak file is read. Anyway, this tool is
+intended for debugging purposes where the performance might not be the
+most important requirement.
+
+To keep the algorithm simple, kmemleak scans for values pointing to any
+address inside a block's address range. This may lead to an increased
+number of false negatives. However, it is likely that a real memory leak
+will eventually become visible.
+
+Another source of false negatives is the data stored in non-pointer
+values. In a future version, kmemleak could only scan the pointer
+members in the allocated structures. This feature would solve many of
+the false negative cases described above.
+
+The tool can report false positives. These are cases where an allocated
+block doesn't need to be freed (some cases in the init_call functions),
+the pointer is calculated by other methods than the usual container_of
+macro or the pointer is stored in a location not scanned by kmemleak.
+
+Page allocations and ioremap are not tracked. Only the ARM and x86
+architectures are currently supported.

Documentation/memory-barriers.txt

@@ -31,6 +31,7 @@ Contents:
 
      - Locking functions.
      - Interrupt disabling functions.
+     - Sleep and wake-up functions.
      - Miscellaneous functions.
 
  (*) Inter-CPU locking barrier effects.
@@ -1217,6 +1218,132 @@ barriers are required in such a situation, they must be provided from some
 other means.
 
 
+SLEEP AND WAKE-UP FUNCTIONS
+---------------------------
+
+Sleeping and waking on an event flagged in global data can be viewed as an
+interaction between two pieces of data: the task state of the task waiting for
+the event and the global data used to indicate the event.  To make sure that
+these appear to happen in the right order, the primitives to begin the process
+of going to sleep, and the primitives to initiate a wake up imply certain
+barriers.
+
+Firstly, the sleeper normally follows something like this sequence of events:
+
+	for (;;) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		if (event_indicated)
+			break;
+		schedule();
+	}
+
+A general memory barrier is interpolated automatically by set_current_state()
+after it has altered the task state:
+
+	CPU 1
+	===============================
+	set_current_state();
+	  set_mb();
+	    STORE current->state
+	    <general barrier>
+	LOAD event_indicated
+
+set_current_state() may be wrapped by:
+
+	prepare_to_wait();
+	prepare_to_wait_exclusive();
+
+which therefore also imply a general memory barrier after setting the state.
+The whole sequence above is available in various canned forms, all of which
+interpolate the memory barrier in the right place:
+
+	wait_event();
+	wait_event_interruptible();
+	wait_event_interruptible_exclusive();
+	wait_event_interruptible_timeout();
+	wait_event_killable();
+	wait_event_timeout();
+	wait_on_bit();
+	wait_on_bit_lock();
+
+
+Secondly, code that performs a wake up normally follows something like this:
+
+	event_indicated = 1;
+	wake_up(&event_wait_queue);
+
+or:
+
+	event_indicated = 1;
+	wake_up_process(event_daemon);
+
+A write memory barrier is implied by wake_up() and co. if and only if they wake
+something up.  The barrier occurs before the task state is cleared, and so sits
+between the STORE to indicate the event and the STORE to set TASK_RUNNING:
+
+	CPU 1				CPU 2
+	===============================	===============================
+	set_current_state();		STORE event_indicated
+	  set_mb();			wake_up();
+	    STORE current->state	  <write barrier>
+	    <general barrier>		  STORE current->state
+	LOAD event_indicated
+
+The available waker functions include:
+
+	complete();
+	wake_up();
+	wake_up_all();
+	wake_up_bit();
+	wake_up_interruptible();
+	wake_up_interruptible_all();
+	wake_up_interruptible_nr();
+	wake_up_interruptible_poll();
+	wake_up_interruptible_sync();
+	wake_up_interruptible_sync_poll();
+	wake_up_locked();
+	wake_up_locked_poll();
+	wake_up_nr();
+	wake_up_poll();
+	wake_up_process();
+
+
+[!] Note that the memory barriers implied by the sleeper and the waker do _not_
+order multiple stores before the wake-up with respect to loads of those stored
+values after the sleeper has called set_current_state().  For instance, if the
+sleeper does:
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	if (event_indicated)
+		break;
+	__set_current_state(TASK_RUNNING);
+	do_something(my_data);
+
+and the waker does:
+
+	my_data = value;
+	event_indicated = 1;
+	wake_up(&event_wait_queue);
+
+there's no guarantee that the change to event_indicated will be perceived by
+the sleeper as coming after the change to my_data.  In such a circumstance, the
+code on both sides must interpolate its own memory barriers between the
+separate data accesses.  Thus the above sleeper ought to do:
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	if (event_indicated) {
+		smp_rmb();
+		do_something(my_data);
+	}
+
+and the waker should do:
+
+	my_data = value;
+	smp_wmb();
+	event_indicated = 1;
+	wake_up(&event_wait_queue);
+
+
 MISCELLANEOUS FUNCTIONS
 -----------------------
 
@@ -1366,7 +1493,7 @@ WHERE ARE MEMORY BARRIERS NEEDED?
 
 Under normal operation, memory operation reordering is generally not going to
 be a problem as a single-threaded linear piece of code will still appear to
-work correctly, even if it's in an SMP kernel.  There are, however, three
+work correctly, even if it's in an SMP kernel.  There are, however, four
 circumstances in which reordering definitely _could_ be a problem:
 
  (*) Interprocessor interaction.

Documentation/scheduler/sched-rt-group.txt

@@ -4,6 +4,7 @@
 CONTENTS
 ========
 
+0. WARNING
 1. Overview
   1.1 The problem
   1.2 The solution
@@ -14,6 +15,23 @@ CONTENTS
 3. Future plans
 
 
+0. WARNING
+==========
+
+ Fiddling with these settings can result in an unstable system, the knobs are
+ root only and assumes root knows what he is doing.
+
+Most notable:
+
+ * very small values in sched_rt_period_us can result in an unstable
+   system when the period is smaller than either the available hrtimer
+   resolution, or the time it takes to handle the budget refresh itself.
+
+ * very small values in sched_rt_runtime_us can result in an unstable
+   system when the runtime is so small the system has difficulty making
+   forward progress (NOTE: the migration thread and kstopmachine both
+   are real-time processes).
+
 1. Overview
 ===========
 
@@ -169,7 +187,7 @@ get their allocated time.
 
 Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
-the limited static priority levels 0-139. With deadline scheduling you need to
+the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
 deadline delta (deadline - now).
 

Documentation/sysctl/kernel.txt

@@ -32,6 +32,7 @@ show up in /proc/sys/kernel:
 - kstack_depth_to_print       [ X86 only ]
 - l2cr                        [ PPC only ]
 - modprobe                    ==> Documentation/debugging-modules.txt
+- modules_disabled
 - msgmax
 - msgmnb
 - msgmni
@@ -184,6 +185,16 @@ kernel stack.
 
 ==============================================================
 
+modules_disabled:
+
+A toggle value indicating if modules are allowed to be loaded
+in an otherwise modular kernel.  This toggle defaults to off
+(0), but can be set true (1).  Once true, modules can be
+neither loaded nor unloaded, and the toggle cannot be set back
+to false.
+
+==============================================================
+
 osrelease, ostype & version:
 
 # cat osrelease

Documentation/trace/events.txt

@@ -0,0 +1,90 @@
+			     Event Tracing
+
+		Documentation written by Theodore Ts'o
+			Updated by Li Zefan
+
+1. Introduction
+===============
+
+Tracepoints (see Documentation/trace/tracepoints.txt) can be used
+without creating custom kernel modules to register probe functions
+using the event tracing infrastructure.
+
+Not all tracepoints can be traced using the event tracing system;
+the kernel developer must provide code snippets which define how the
+tracing information is saved into the tracing buffer, and how the
+tracing information should be printed.
+
+2. Using Event Tracing
+======================
+
+2.1 Via the 'set_event' interface
+---------------------------------
+
+The events which are available for tracing can be found in the file
+/debug/tracing/available_events.
+
+To enable a particular event, such as 'sched_wakeup', simply echo it
+to /debug/tracing/set_event. For example:
+
+	# echo sched_wakeup >> /debug/tracing/set_event
+
+[ Note: '>>' is necessary, otherwise it will firstly disable
+  all the events. ]
+
+To disable an event, echo the event name to the set_event file prefixed
+with an exclamation point:
+
+	# echo '!sched_wakeup' >> /debug/tracing/set_event
+
+To disable all events, echo an empty line to the set_event file:
+
+	# echo > /debug/tracing/set_event
+
+To enable all events, echo '*:*' or '*:' to the set_event file:
+
+	# echo *:* > /debug/tracing/set_event
+
+The events are organized into subsystems, such as ext4, irq, sched,
+etc., and a full event name looks like this: <subsystem>:<event>.  The
+subsystem name is optional, but it is displayed in the available_events
+file.  All of the events in a subsystem can be specified via the syntax
+"<subsystem>:*"; for example, to enable all irq events, you can use the
+command:
+
+	# echo 'irq:*' > /debug/tracing/set_event
+
+2.2 Via the 'enable' toggle
+---------------------------
+
+The events available are also listed in /debug/tracing/events/ hierarchy
+of directories.
+
+To enable event 'sched_wakeup':
+
+	# echo 1 > /debug/tracing/events/sched/sched_wakeup/enable
+
+To disable it:
+
+	# echo 0 > /debug/tracing/events/sched/sched_wakeup/enable
+
+To enable all events in sched subsystem:
+
+	# echo 1 > /debug/tracing/events/sched/enable
+
+To eanble all events:
+
+	# echo 1 > /debug/tracing/events/enable
+
+When reading one of these enable files, there are four results:
+
+ 0 - all events this file affects are disabled
+ 1 - all events this file affects are enabled
+ X - there is a mixture of events enabled and disabled
+ ? - this file does not affect any event
+
+3. Defining an event-enabled tracepoint
+=======================================
+
+See The example provided in samples/trace_events
+

Documentation/trace/ftrace.txt

@@ -179,7 +179,7 @@ Here is the list of current tracers that may be configured.
 
 	Function call tracer to trace all kernel functions.
 
-  "function_graph_tracer"
+  "function_graph"
 
 	Similar to the function tracer except that the
 	function tracer probes the functions on their entry
@@ -518,9 +518,18 @@ priority with zero (0) being the highest priority and the nice
 values starting at 100 (nice -20). Below is a quick chart to map
 the kernel priority to user land priorities.
 
-  Kernel priority: 0 to 99    ==> user RT priority 99 to 0
-  Kernel priority: 100 to 139 ==> user nice -20 to 19
-  Kernel priority: 140        ==> idle task priority
+   Kernel Space                     User Space
+ ===============================================================
+   0(high) to  98(low)     user RT priority 99(high) to 1(low)
+                           with SCHED_RR or SCHED_FIFO
+ ---------------------------------------------------------------
+  99                       sched_priority is not used in scheduling
+                           decisions(it must be specified as 0)
+ ---------------------------------------------------------------
+ 100(high) to 139(low)     user nice -20(high) to 19(low)
+ ---------------------------------------------------------------
+ 140                       idle task priority
+ ---------------------------------------------------------------
 
 The task states are:
 

Documentation/trace/power.txt

@@ -0,0 +1,17 @@
+The power tracer collects detailed information about C-state and P-state
+transitions, instead of just looking at the high-level "average"
+information.
+
+There is a helper script found in scrips/tracing/power.pl in the kernel
+sources which can be used to parse this information and create a
+Scalable Vector Graphics (SVG) picture from the trace data.
+
+To use this tracer:
+
+	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+	echo power > /sys/kernel/debug/tracing/current_tracer
+	echo 1 > /sys/kernel/debug/tracing/tracing_enabled
+	sleep 1
+	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+	cat /sys/kernel/debug/tracing/trace | \
+		perl scripts/tracing/power.pl > out.sv

Documentation/x86/boot.txt

@@ -50,6 +50,10 @@ Protocol 2.08:	(Kernel 2.6.26) Added crc32 checksum and ELF format
 Protocol 2.09:	(Kernel 2.6.26) Added a field of 64-bit physical
 		pointer to single linked list of struct	setup_data.
 
+Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
+		beyond the kernel_alignment added, new init_size and
+		pref_address fields.  Added extended boot loader IDs.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -168,12 +172,13 @@ Offset	Proto	Name		Meaning
 021C/4	2.00+	ramdisk_size	initrd size (set by boot loader)
 0220/4	2.00+	bootsect_kludge	DO NOT USE - for bootsect.S use only
 0224/2	2.01+	heap_end_ptr	Free memory after setup end
-0226/2	N/A	pad1		Unused
+0226/1	2.02+(3 ext_loader_ver	Extended boot loader version
+0227/1	2.02+(3	ext_loader_type	Extended boot loader ID
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
 022C/4	2.03+	ramdisk_max	Highest legal initrd address
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
-0235/1	N/A	pad2		Unused
+0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
 0236/2	N/A	pad3		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
@@ -182,6 +187,8 @@ Offset	Proto	Name		Meaning
 024C/4	2.08+	payload_length	Length of kernel payload
 0250/8	2.09+	setup_data	64-bit physical pointer to linked list
 				of struct setup_data
+0258/8	2.10+	pref_address	Preferred loading address
+0260/4	2.10+	init_size	Linear memory required during initialization
 
 (1) For backwards compatibility, if the setup_sects field contains 0, the
     real value is 4.
@@ -190,6 +197,8 @@ Offset	Proto	Name		Meaning
     field are unusable, which means the size of a bzImage kernel
     cannot be determined.
 
+(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
+
 If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
 the boot protocol version is "old".  Loading an old kernel, the
 following parameters should be assumed:
@@ -343,18 +352,32 @@ Protocol:	2.00+
   0xTV here, where T is an identifier for the boot loader and V is
   a version number.  Otherwise, enter 0xFF here.
 
+  For boot loader IDs above T = 0xD, write T = 0xE to this field and
+  write the extended ID minus 0x10 to the ext_loader_type field.
+  Similarly, the ext_loader_ver field can be used to provide more than
+  four bits for the bootloader version.
+
+  For example, for T = 0x15, V = 0x234, write:
+
+  type_of_loader  <- 0xE4
+  ext_loader_type <- 0x05
+  ext_loader_ver  <- 0x23
+
   Assigned boot loader ids:
 	0  LILO			(0x00 reserved for pre-2.00 bootloader)
 	1  Loadlin
 	2  bootsect-loader	(0x20, all other values reserved)
-	3  SYSLINUX
-	4  EtherBoot
+	3  Syslinux
+	4  Etherboot/gPXE
 	5  ELILO
 	7  GRUB
-	8  U-BOOT
+	8  U-Boot
 	9  Xen
 	A  Gujin
 	B  Qemu
+	C  Arcturus Networks uCbootloader
+	E  Extended		(see ext_loader_type)
+	F  Special		(0xFF = undefined)
 
   Please contact <hpa@zytor.com> if you need a bootloader ID
   value assigned.
@@ -453,6 +476,35 @@ Protocol:	2.01+
   Set this field to the offset (from the beginning of the real-mode
   code) of the end of the setup stack/heap, minus 0x0200.
 
+Field name:	ext_loader_ver
+Type:		write (optional)
+Offset/size:	0x226/1
+Protocol:	2.02+
+
+  This field is used as an extension of the version number in the
+  type_of_loader field.  The total version number is considered to be
+  (type_of_loader & 0x0f) + (ext_loader_ver << 4).
+
+  The use of this field is boot loader specific.  If not written, it
+  is zero.
+
+  Kernels prior to 2.6.31 did not recognize this field, but it is safe
+  to write for protocol version 2.02 or higher.
+
+Field name:	ext_loader_type
+Type:		write (obligatory if (type_of_loader & 0xf0) == 0xe0)
+Offset/size:	0x227/1
+Protocol:	2.02+
+
+  This field is used as an extension of the type number in
+  type_of_loader field.  If the type in type_of_loader is 0xE, then
+  the actual type is (ext_loader_type + 0x10).
+
+  This field is ignored if the type in type_of_loader is not 0xE.
+
+  Kernels prior to 2.6.31 did not recognize this field, but it is safe
+  to write for protocol version 2.02 or higher.
+
 Field name:	cmd_line_ptr
 Type:		write (obligatory)
 Offset/size:	0x228/4
@@ -482,11 +534,19 @@ Protocol:	2.03+
   0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
 
 Field name:	kernel_alignment
-Type:		read (reloc)
+Type:		read/modify (reloc)
 Offset/size:	0x230/4
-Protocol:	2.05+
+Protocol:	2.05+ (read), 2.10+ (modify)
 
-  Alignment unit required by the kernel (if relocatable_kernel is true.)
+  Alignment unit required by the kernel (if relocatable_kernel is
+  true.)  A relocatable kernel that is loaded at an alignment
+  incompatible with the value in this field will be realigned during
+  kernel initialization.
+
+  Starting with protocol version 2.10, this reflects the kernel
+  alignment preferred for optimal performance; it is possible for the
+  loader to modify this field to permit a lesser alignment.  See the
+  min_alignment and pref_address field below.
 
 Field name:	relocatable_kernel
 Type:		read (reloc)
@@ -498,6 +558,22 @@ Protocol:	2.05+
   After loading, the boot loader must set the code32_start field to
   point to the loaded code, or to a boot loader hook.
 
+Field name:	min_alignment
+Type:		read (reloc)
+Offset/size:	0x235/1
+Protocol:	2.10+
+
+  This field, if nonzero, indicates as a power of two the minimum
+  alignment required, as opposed to preferred, by the kernel to boot.
+  If a boot loader makes use of this field, it should update the
+  kernel_alignment field with the alignment unit desired; typically:
+
+	kernel_alignment = 1 << min_alignment
+
+  There may be a considerable performance cost with an excessively
+  misaligned kernel.  Therefore, a loader should typically try each
+  power-of-two alignment from kernel_alignment down to this alignment.
+
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4
@@ -582,6 +658,36 @@ Protocol:	2.09+
   sure to consider the case where the linked list already contains
   entries.
 
+Field name:	pref_address
+Type:		read (reloc)
+Offset/size:	0x258/8
+Protocol:	2.10+
+
+  This field, if nonzero, represents a preferred load address for the
+  kernel.  A relocating bootloader should attempt to load at this
+  address if possible.
+
+  A non-relocatable kernel will unconditionally move itself and to run
+  at this address.
+
+Field name:	init_size
+Type:		read
+Offset/size:	0x25c/4
+
+  This field indicates the amount of linear contiguous memory starting
+  at the kernel runtime start address that the kernel needs before it
+  is capable of examining its memory map.  This is not the same thing
+  as the total amount of memory the kernel needs to boot, but it can
+  be used by a relocating boot loader to help select a safe load
+  address for the kernel.
+
+  The kernel runtime start address is determined by the following algorithm:
+
+  if (relocatable_kernel)
+	runtime_start = align_up(load_address, kernel_alignment)
+  else
+	runtime_start = pref_address
+
 
 **** THE IMAGE CHECKSUM
 

Documentation/x86/x86_64/boot-options.txt

@@ -150,11 +150,6 @@ NUMA
 		Otherwise, the remaining system RAM is allocated to an
 		additional node.
 
-  numa=hotadd=percent
-		Only allow hotadd memory to preallocate page structures upto
-		percent of already available memory.
-		numa=hotadd=0 will disable hotadd memory.
-
 ACPI
 
   acpi=off	Don't enable ACPI

Documentation/x86/x86_64/mm.txt

@@ -6,10 +6,11 @@ Virtual memory map with 4 level page tables:
 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
 hole caused by [48:63] sign extension
 ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
-ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory
-ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
-ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
-ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)
+ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory
+ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole
+ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
+ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
+ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
 ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space

MAINTAINERS

@@ -71,7 +71,7 @@ P: Person
 M: Mail patches to
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
-T: SCM tree type and location.  Type is one of: git, hg, quilt.
+T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
 S: Status, one of the following:
 
 	Supported:	Someone is actually paid to look after this.
@@ -159,7 +159,8 @@ F:	drivers/net/r8169.c
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-S:	Orphan
+M:	alan@lxorguk.ukuu.org.uk
+S:	Odd Fixes
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
@@ -1801,10 +1802,10 @@ F:	drivers/char/epca*
 F:	drivers/char/digi*
 
 DIRECTORY NOTIFICATION (DNOTIFY)
-P:	Stephen Rothwell
-M:	sfr@canb.auug.org.au
+P:	Eric Paris
+M:	eparis@parisplace.org
 L:	linux-kernel@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	Documentation/filesystems/dnotify.txt
 F:	fs/notify/dnotify/
 F:	include/linux/dnotify.h
@@ -1978,6 +1979,16 @@ F:	Documentation/edac.txt
 F:	drivers/edac/edac_*
 F:	include/linux/edac.h
 
+EDAC-AMD64
+P:	Doug Thompson
+M:	dougthompson@xmission.com
+P:	Borislav Petkov
+M:	borislav.petkov@amd.com
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+W:	bluesmoke.sourceforge.net
+S:	Supported
+F:	drivers/edac/amd64_edac*
+
 EDAC-E752X
 P:	Mark Gross
 M:	mark.gross@intel.com
@@ -2847,6 +2858,8 @@ P:	John McCutchan
 M:	john@johnmccutchan.com
 P:	Robert Love
 M:	rlove@rlove.org
+P:	Eric Paris
+M:	eparis@parisplace.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/inotify.txt
@@ -3359,6 +3372,12 @@ F:	Documentation/trace/kmemtrace.txt
 F:	include/trace/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
+KMEMLEAK
+P:	Catalin Marinas
+M:	catalin.marinas@arm.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 KPROBES
 P:	Ananth N Mavinakayanahalli
 M:	ananth@in.ibm.com
@@ -4392,6 +4411,16 @@ S:	Maintained
 F:	include/linux/delayacct.h
 F:	kernel/delayacct.c
 
+PERFORMANCE COUNTER SUBSYSTEM
+P:	Peter Zijlstra
+M:	a.p.zijlstra@chello.nl
+P:	Paul Mackerras
+M:	paulus@samba.org
+P:	Ingo Molnar
+M:	mingo@elte.hu
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+
 PERSONALITY HANDLING
 P:	Christoph Hellwig
 M:	hch@infradead.org
@@ -5629,6 +5658,7 @@ P:	Alan Cox
 M:	alan@lxorguk.ukuu.org.uk
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
+T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
 
 TULIP NETWORK DRIVERS
 P:	Grant Grundler

arch/alpha/kernel/osf_sys.c

@@ -371,8 +371,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
 	int retval = -EINVAL;
 	char *name;
 
-	lock_kernel();
-
 	name = getname(path);
 	retval = PTR_ERR(name);
 	if (IS_ERR(name))
@@ -392,7 +390,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
 	}
 	putname(name);
  out:
-	unlock_kernel();
 	return retval;
 }
 

arch/alpha/kernel/sys_dp264.c

@@ -176,22 +176,26 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
 	}
 }
 
-static void
+static int
 dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
 	spin_lock(&dp264_irq_lock);
 	cpu_set_irq_affinity(irq, *affinity);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
+
+	return 0;
 }
 
-static void
+static int
 clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
 	spin_lock(&dp264_irq_lock);
 	cpu_set_irq_affinity(irq - 16, *affinity);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
+
+	return 0;
 }
 
 static struct hw_interrupt_type dp264_irq_type = {

arch/alpha/kernel/sys_titan.c

@@ -157,13 +157,15 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
 
 }
 
-static void
+static int
 titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
 	spin_lock(&titan_irq_lock);
 	titan_cpu_set_irq_affinity(irq - 16, *affinity);
 	titan_update_irq_hw(titan_cached_irq_mask);
 	spin_unlock(&titan_irq_lock);
+
+	return 0;
 }
 
 static void

arch/arm/common/gic.c

@@ -109,7 +109,7 @@ static void gic_unmask_irq(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
+static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
 	void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
 	unsigned int shift = (irq % 4) * 8;
@@ -122,6 +122,8 @@ static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
 	spin_unlock(&irq_controller_lock);
+
+	return 0;
 }
 #endif
 

arch/arm/plat-mxc/include/mach/imx-uart.h

@@ -20,11 +20,16 @@
 #define ASMARM_ARCH_UART_H
 
 #define IMXUART_HAVE_RTSCTS (1<<0)
+#define IMXUART_IRDA        (1<<1)
 
 struct imxuart_platform_data {
 	int (*init)(struct platform_device *pdev);
 	int (*exit)(struct platform_device *pdev);
 	unsigned int flags;
+	void (*irda_enable)(int enable);
+	unsigned int irda_inv_rx:1;
+	unsigned int irda_inv_tx:1;
+	unsigned short transceiver_delay;
 };
 
 #endif

arch/arm/plat-omap/mailbox.c

@@ -147,24 +147,40 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
 	return ret;
 }
 
+struct omap_msg_tx_data {
+	mbox_msg_t	msg;
+	void		*arg;
+};
+
+static void omap_msg_tx_end_io(struct request *rq, int error)
+{
+	kfree(rq->special);
+	__blk_put_request(rq->q, rq);
+}
+
 int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg)
 {
+	struct omap_msg_tx_data *tx_data;
 	struct request *rq;
 	struct request_queue *q = mbox->txq->queue;
-	int ret = 0;
+
+	tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC);
+	if (unlikely(!tx_data))
+		return -ENOMEM;
 
 	rq = blk_get_request(q, WRITE, GFP_ATOMIC);
 	if (unlikely(!rq)) {
-		ret = -ENOMEM;
-		goto fail;
+		kfree(tx_data);
+		return -ENOMEM;
 	}
 
-	rq->data = (void *)msg;
-	blk_insert_request(q, rq, 0, arg);
+	tx_data->msg = msg;
+	tx_data->arg = arg;
+	rq->end_io = omap_msg_tx_end_io;
+	blk_insert_request(q, rq, 0, tx_data);
 
 	schedule_work(&mbox->txq->work);
- fail:
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(omap_mbox_msg_send);
 
@@ -178,22 +194,28 @@ static void mbox_tx_work(struct work_struct *work)
 	struct request_queue *q = mbox->txq->queue;
 
 	while (1) {
+		struct omap_msg_tx_data *tx_data;
+
 		spin_lock(q->queue_lock);
-		rq = elv_next_request(q);
+		rq = blk_fetch_request(q);
 		spin_unlock(q->queue_lock);
 
 		if (!rq)
 			break;
 
-		ret = __mbox_msg_send(mbox, (mbox_msg_t) rq->data, rq->special);
+		tx_data = rq->special;
+
+		ret = __mbox_msg_send(mbox, tx_data->msg, tx_data->arg);
 		if (ret) {
 			enable_mbox_irq(mbox, IRQ_TX);
+			spin_lock(q->queue_lock);
+			blk_requeue_request(q, rq);
+			spin_unlock(q->queue_lock);
 			return;
 		}
 
 		spin_lock(q->queue_lock);
-		if (__blk_end_request(rq, 0, 0))
-			BUG();
+		__blk_end_request_all(rq, 0);
 		spin_unlock(q->queue_lock);
 	}
 }
@@ -218,16 +240,13 @@ static void mbox_rx_work(struct work_struct *work)
 
 	while (1) {
 		spin_lock_irqsave(q->queue_lock, flags);
-		rq = elv_next_request(q);
+		rq = blk_fetch_request(q);
 		spin_unlock_irqrestore(q->queue_lock, flags);
 		if (!rq)
 			break;
 
-		msg = (mbox_msg_t) rq->data;
-
-		if (blk_end_request(rq, 0, 0))
-			BUG();
-
+		msg = (mbox_msg_t)rq->special;
+		blk_end_request_all(rq, 0);
 		mbox->rxq->callback((void *)msg);
 	}
 }
@@ -264,7 +283,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 			goto nomem;
 
 		msg = mbox_fifo_read(mbox);
-		rq->data = (void *)msg;
 
 		if (unlikely(mbox_seq_test(mbox, msg))) {
 			pr_info("mbox: Illegal seq bit!(%08x)\n", msg);
@@ -272,7 +290,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 				mbox->err_notify();
 		}
 
-		blk_insert_request(q, rq, 0, NULL);
+		blk_insert_request(q, rq, 0, (void *)msg);
 		if (mbox->ops->type == OMAP_MBOX_TYPE1)
 			break;
 	}
@@ -329,16 +347,15 @@ omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf)
 
 	while (1) {
 		spin_lock_irqsave(q->queue_lock, flags);
-		rq = elv_next_request(q);
+		rq = blk_fetch_request(q);
 		spin_unlock_irqrestore(q->queue_lock, flags);
 
 		if (!rq)
 			break;
 
-		*p = (mbox_msg_t) rq->data;
+		*p = (mbox_msg_t)rq->special;
 
-		if (blk_end_request(rq, 0, 0))
-			BUG();
+		blk_end_request_all(rq, 0);
 
 		if (unlikely(mbox_seq_test(mbox, *p))) {
 			pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p);

arch/cris/arch-v32/kernel/irq.c

@@ -325,12 +325,14 @@ static void end_crisv32_irq(unsigned int irq)
 {
 }
 
-void set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
+int set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&irq_lock, flags);
 	irq_allocations[irq - FIRST_IRQ].mask = *dest;
 	spin_unlock_irqrestore(&irq_lock, flags);
+
+	return 0;
 }
 
 static struct irq_chip crisv32_irq_type = {

arch/frv/Kconfig

@@ -6,6 +6,7 @@ config FRV
 	bool
 	default y
 	select HAVE_IDE
+	select HAVE_ARCH_TRACEHOOK
 
 config ZONE_DMA
 	bool

arch/frv/include/asm/bitops.h

@@ -112,7 +112,7 @@ extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsig
 #define atomic_clear_mask(mask, v)	atomic_test_and_ANDNOT_mask((mask), (v))
 #define atomic_set_mask(mask, v)	atomic_test_and_OR_mask((mask), (v))
 
-static inline int test_and_clear_bit(int nr, volatile void *addr)
+static inline int test_and_clear_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *ptr = addr;
 	unsigned long mask = 1UL << (nr & 31);
@@ -120,7 +120,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr)
 	return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0;
 }
 
-static inline int test_and_set_bit(int nr, volatile void *addr)
+static inline int test_and_set_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *ptr = addr;
 	unsigned long mask = 1UL << (nr & 31);
@@ -128,7 +128,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
 	return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0;
 }
 
-static inline int test_and_change_bit(int nr, volatile void *addr)
+static inline int test_and_change_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *ptr = addr;
 	unsigned long mask = 1UL << (nr & 31);
@@ -136,22 +136,22 @@ static inline int test_and_change_bit(int nr, volatile void *addr)
 	return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0;
 }
 
-static inline void clear_bit(int nr, volatile void *addr)
+static inline void clear_bit(unsigned long nr, volatile void *addr)
 {
 	test_and_clear_bit(nr, addr);
 }
 
-static inline void set_bit(int nr, volatile void *addr)
+static inline void set_bit(unsigned long nr, volatile void *addr)
 {
 	test_and_set_bit(nr, addr);
 }
 
-static inline void change_bit(int nr, volatile void * addr)
+static inline void change_bit(unsigned long nr, volatile void *addr)
 {
 	test_and_change_bit(nr, addr);
 }
 
-static inline void __clear_bit(int nr, volatile void * addr)
+static inline void __clear_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask;
@@ -161,7 +161,7 @@ static inline void __clear_bit(int nr, volatile void * addr)
 	*a &= ~mask;
 }
 
-static inline void __set_bit(int nr, volatile void * addr)
+static inline void __set_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask;
@@ -171,7 +171,7 @@ static inline void __set_bit(int nr, volatile void * addr)
 	*a |= mask;
 }
 
-static inline void __change_bit(int nr, volatile void *addr)
+static inline void __change_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask;
@@ -181,7 +181,7 @@ static inline void __change_bit(int nr, volatile void *addr)
 	*a ^= mask;
 }
 
-static inline int __test_and_clear_bit(int nr, volatile void * addr)
+static inline int __test_and_clear_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask, retval;
@@ -193,7 +193,7 @@ static inline int __test_and_clear_bit(int nr, volatile void * addr)
 	return retval;
 }
 
-static inline int __test_and_set_bit(int nr, volatile void * addr)
+static inline int __test_and_set_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask, retval;
@@ -205,7 +205,7 @@ static inline int __test_and_set_bit(int nr, volatile void * addr)
 	return retval;
 }
 
-static inline int __test_and_change_bit(int nr, volatile void * addr)
+static inline int __test_and_change_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask, retval;
@@ -220,12 +220,13 @@ static inline int __test_and_change_bit(int nr, volatile void * addr)
 /*
  * This routine doesn't need to be atomic.
  */
-static inline int __constant_test_bit(int nr, const volatile void * addr)
+static inline int
+__constant_test_bit(unsigned long nr, const volatile void *addr)
 {
 	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
 }
 
-static inline int __test_bit(int nr, const volatile void * addr)
+static inline int __test_bit(unsigned long nr, const volatile void *addr)
 {
 	int 	* a = (int *) addr;
 	int	mask;

arch/frv/include/asm/elf.h

@@ -116,6 +116,7 @@ do {											\
 } while(0)
 
 #define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
 #define ELF_FDPIC_CORE_EFLAGS	EF_FRV_FDPIC
 #define ELF_EXEC_PAGESIZE	16384
 

arch/frv/include/asm/pci.h

@@ -81,8 +81,7 @@ static inline void pci_dma_sync_single(struct pci_dev *hwdev,
 				       dma_addr_t dma_handle,
 				       size_t size, int direction)
 {
-	if (direction == PCI_DMA_NONE)
-                BUG();
+	BUG_ON(direction == PCI_DMA_NONE);
 
 	frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle),
 			    (unsigned long)bus_to_virt(dma_handle) + size);
@@ -99,9 +98,7 @@ static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
 				   int nelems, int direction)
 {
 	int i;
-
-	if (direction == PCI_DMA_NONE)
-                BUG();
+	BUG_ON(direction == PCI_DMA_NONE);
 
 	for (i = 0; i < nelems; i++)
 		frv_cache_wback_inv(sg_dma_address(&sg[i]),

arch/frv/include/asm/ptrace.h

@@ -65,6 +65,8 @@
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
+struct task_struct;
+
 /*
  * we dedicate GR28 to keeping a pointer to the current exception frame
  * - gr28 is destroyed on entry to the kernel from userspace
@@ -73,11 +75,18 @@ register struct pt_regs *__frame asm("gr28");
 
 #define user_mode(regs)			(!((regs)->psr & PSR_S))
 #define instruction_pointer(regs)	((regs)->pc)
+#define user_stack_pointer(regs)	((regs)->sp)
 
 extern unsigned long user_stack(const struct pt_regs *);
 extern void show_regs(struct pt_regs *);
 #define profile_pc(regs) ((regs)->pc)
-#endif
+
+#define task_pt_regs(task) ((task)->thread.frame0)
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
 
 #endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
 #endif /* _ASM_PTRACE_H */

arch/frv/include/asm/syscall.h

@@ -0,0 +1,123 @@
+/* syscall parameter access functions
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H
+
+#include <linux/err.h>
+#include <asm/ptrace.h>
+
+/*
+ * Get the system call number or -1
+ */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return regs->syscallno;
+}
+
+/*
+ * Restore the clobbered GR8 register
+ * (1st syscall arg was overwritten with syscall return or error)
+ */
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->gr8 = regs->orig_gr8;
+}
+
+/*
+ * See if the syscall return value is an error, returning it if it is and 0 if
+ * not
+ */
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->gr8) ? regs->gr8 : 0;
+}
+
+/*
+ * Get the syscall return value
+ */
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->gr8;
+}
+
+/*
+ * Set the syscall return value
+ */
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error)
+		regs->gr8 = -error;
+	else
+		regs->gr8 = val;
+}
+
+/*
+ * Retrieve the system call arguments
+ */
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	/*
+	 * Do this simply for now. If we need to start supporting
+	 * fetching arguments from arbitrary indices, this will need some
+	 * extra logic. Presently there are no in-tree users that depend
+	 * on this behaviour.
+	 */
+	BUG_ON(i);
+
+	/* Argument pattern is: GR8, GR9, GR10, GR11, GR12, GR13 */
+	switch (n) {
+	case 6: args[5] = regs->gr13;
+	case 5: args[4] = regs->gr12;
+	case 4: args[3] = regs->gr11;
+	case 3: args[2] = regs->gr10;
+	case 2: args[1] = regs->gr9;
+	case 1:	args[0] = regs->gr8;
+		break;
+	default:
+		BUG();
+	}
+}
+
+/*
+ * Alter the system call arguments
+ */
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	/* Same note as above applies */
+	BUG_ON(i);
+
+	switch (n) {
+	case 6: regs->gr13 = args[5];
+	case 5: regs->gr12 = args[4];
+	case 4: regs->gr11 = args[3];
+	case 3: regs->gr10 = args[2];
+	case 2: regs->gr9  = args[1];
+	case 1: regs->gr8  = args[0];
+		break;
+	default:
+		BUG();
+	}
+}
+
+#endif /* _ASM_SYSCALL_H */

arch/frv/include/asm/thread_info.h

@@ -109,20 +109,20 @@ register struct thread_info *__current_thread_info asm("gr15");
  * - other flags in MSW
  */
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_SINGLESTEP		3	/* restore singlestep on return to user mode */
-#define TIF_IRET		4	/* return with iret */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		17	/* OOM killer killed process */
 #define TIF_FREEZE		18	/* freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
-#define _TIF_IRET		(1 << TIF_IRET)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)

arch/frv/kernel/entry.S

@@ -886,7 +886,6 @@ system_call:
 	bnc		icc0,#0,__syscall_badsys
 
 	ldi		@(gr15,#TI_FLAGS),gr4
-	ori		gr4,#_TIF_SYSCALL_TRACE,gr4
 	andicc		gr4,#_TIF_SYSCALL_TRACE,gr0,icc0
 	bne		icc0,#0,__syscall_trace_entry
 
@@ -1150,11 +1149,10 @@ __entry_work_notifysig:
 	# perform syscall entry tracing
 __syscall_trace_entry:
 	LEDS		0x6320
-	setlos.p	#0,gr8
-	call		do_syscall_trace
+	call		syscall_trace_entry
 
-	ldi		@(gr28,#REG_SYSCALLNO),gr7
-	lddi		@(gr28,#REG_GR(8)) ,gr8
+	lddi.p		@(gr28,#REG_GR(8)) ,gr8
+	ori		gr8,#0,gr7		; syscall_trace_entry() returned new syscallno
 	lddi		@(gr28,#REG_GR(10)),gr10
 	lddi.p		@(gr28,#REG_GR(12)),gr12
 
@@ -1169,11 +1167,10 @@ __syscall_exit_work:
 	beq		icc0,#1,__entry_work_pending
 
 	movsg		psr,gr23
-	andi		gr23,#~PSR_PIL,gr23	; could let do_syscall_trace() call schedule()
+	andi		gr23,#~PSR_PIL,gr23	; could let syscall_trace_exit() call schedule()
 	movgs		gr23,psr
 
-	setlos.p	#1,gr8
-	call		do_syscall_trace
+	call		syscall_trace_exit
 	bra		__entry_resume_userspace
 
 __syscall_badsys:

arch/frv/kernel/ptrace.c

@@ -19,6 +19,9 @@
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/signal.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -32,6 +35,169 @@
  * in exit.c or in signal.c.
  */
 
+/*
+ * retrieve the contents of FRV userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct user_int_regs *iregs = &target->thread.user->i;
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  iregs, 0, sizeof(*iregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*iregs), -1);
+}
+
+/*
+ * update the contents of the FRV userspace general registers
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct user_int_regs *iregs = &target->thread.user->i;
+	unsigned int offs_gr0, offs_gr1;
+	int ret;
+
+	/* not allowed to set PSR or __status */
+	if (pos < offsetof(struct user_int_regs, psr) + sizeof(long) &&
+	    pos + count > offsetof(struct user_int_regs, psr))
+		return -EIO;
+
+	if (pos < offsetof(struct user_int_regs, __status) + sizeof(long) &&
+	    pos + count > offsetof(struct user_int_regs, __status))
+		return -EIO;
+
+	/* set the control regs */
+	offs_gr0 = offsetof(struct user_int_regs, gr[0]);
+	offs_gr1 = offsetof(struct user_int_regs, gr[1]);
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 iregs, 0, offs_gr0);
+	if (ret < 0)
+		return ret;
+
+	/* skip GR0/TBR */
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					offs_gr0, offs_gr1);
+	if (ret < 0)
+		return ret;
+
+	/* set the general regs */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &iregs->gr[1], offs_gr1, sizeof(*iregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					sizeof(*iregs), -1);
+}
+
+/*
+ * retrieve the contents of FRV userspace FP/Media registers
+ */
+static int fpmregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct user_fpmedia_regs *fpregs = &target->thread.user->f;
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  fpregs, 0, sizeof(*fpregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*fpregs), -1);
+}
+
+/*
+ * update the contents of the FRV userspace FP/Media registers
+ */
+static int fpmregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct user_fpmedia_regs *fpregs = &target->thread.user->f;
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 fpregs, 0, sizeof(*fpregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					sizeof(*fpregs), -1);
+}
+
+/*
+ * determine if the FP/Media registers have actually been used
+ */
+static int fpmregs_active(struct task_struct *target,
+			  const struct user_regset *regset)
+{
+	return tsk_used_math(target) ? regset->n : 0;
+}
+
+/*
+ * Define the register sets available on the FRV under Linux
+ */
+enum frv_regset {
+	REGSET_GENERAL,
+	REGSET_FPMEDIA,
+};
+
+static const struct user_regset frv_regsets[] = {
+	/*
+	 * General register format is:
+	 *	PSR, ISR, CCR, CCCR, LR, LCR, PC, (STATUS), SYSCALLNO, ORIG_G8
+	 *	GNER0-1, IACC0, TBR, GR1-63
+	 */
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+	/*
+	 * FPU/Media register format is:
+	 *	FR0-63, FNER0-1, MSR0-1, ACC0-7, ACCG0-8, FSR
+	 */
+	[REGSET_FPMEDIA] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct user_fpmedia_regs) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= fpmregs_get,
+		.set		= fpmregs_set,
+		.active		= fpmregs_active,
+	},
+};
+
+static const struct user_regset_view user_frv_native_view = {
+	.name		= "frv",
+	.e_machine	= EM_FRV,
+	.regsets	= frv_regsets,
+	.n		= ARRAY_SIZE(frv_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_frv_native_view;
+}
+
 /*
  * Get contents of register REGNO in task TASK.
  */
@@ -68,41 +234,24 @@ static inline int put_reg(struct task_struct *task, int regno,
 	}
 }
 
-/*
- * check that an address falls within the bounds of the target process's memory
- * mappings
- */
-static inline int is_user_addr_valid(struct task_struct *child,
-				     unsigned long start, unsigned long len)
-{
-#ifdef CONFIG_MMU
-	if (start >= PAGE_OFFSET || len > PAGE_OFFSET - start)
-		return -EIO;
-	return 0;
-#else
-	struct vm_area_struct *vma;
-
-	vma = find_vma(child->mm, start);
-	if (vma && start >= vma->vm_start && start + len <= vma->vm_end)
-		return 0;
-
-	return -EIO;
-#endif
-}
-
 /*
  * Called by kernel/ptrace.c when detaching..
  *
  * Control h/w single stepping
  */
-void ptrace_disable(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
+{
+	child->thread.frame0->__status |= REG__STATUS_STEP;
+}
+
+void user_disable_single_step(struct task_struct *child)
 {
 	child->thread.frame0->__status &= ~REG__STATUS_STEP;
 }
 
-void ptrace_enable(struct task_struct *child)
+void ptrace_disable(struct task_struct *child)
 {
-	child->thread.frame0->__status |= REG__STATUS_STEP;
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -111,15 +260,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-		/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = -EIO;
-		if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0)
-			break;
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 		/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		tmp = 0;
@@ -163,15 +303,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-		/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = -EIO;
-		if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0)
-			break;
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 		ret = -EIO;
 		if ((addr & 3) || addr < 0)
@@ -179,7 +310,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 		ret = 0;
 		switch (addr >> 2) {
-		case 0 ... PT__END-1:
+		case 0 ... PT__END - 1:
 			ret = put_reg(child, addr >> 2, data);
 			break;
 
@@ -189,95 +320,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		ptrace_disable(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
+	case PTRACE_GETREGS:	/* Get all integer regs from the child. */
+		return copy_regset_to_user(child, &user_frv_native_view,
+					   REGSET_GENERAL,
+					   0, sizeof(child->thread.user->i),
+					   (void __user *)data);
 
-		/* make the child exit.  Best I can do is send it a sigkill.
-		 * perhaps it should be put in the status that it wants to
-		 * exit.
-		 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-		ptrace_disable(child);
-		wake_up_process(child);
-		break;
+	case PTRACE_SETREGS:	/* Set all integer regs in the child. */
+		return copy_regset_from_user(child, &user_frv_native_view,
+					     REGSET_GENERAL,
+					     0, sizeof(child->thread.user->i),
+					     (const void __user *)data);
 
-	case PTRACE_SINGLESTEP:  /* set the trap flag. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		ptrace_enable(child);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
+	case PTRACE_GETFPREGS:	/* Get the child FP/Media state. */
+		return copy_regset_to_user(child, &user_frv_native_view,
+					   REGSET_FPMEDIA,
+					   0, sizeof(child->thread.user->f),
+					   (void __user *)data);
 
-	case PTRACE_DETACH:	/* detach a process that was attached. */
-		ret = ptrace_detach(child, data);
-		break;
-
-	case PTRACE_GETREGS: { /* Get all integer regs from the child. */
-		int i;
-		for (i = 0; i < PT__GPEND; i++) {
-			tmp = get_reg(child, i);
-			if (put_user(tmp, (unsigned long *) data)) {
-				ret = -EFAULT;
-				break;
-			}
-			data += sizeof(long);
-		}
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_SETREGS: { /* Set all integer regs in the child. */
-		int i;
-		for (i = 0; i < PT__GPEND; i++) {
-			if (get_user(tmp, (unsigned long *) data)) {
-				ret = -EFAULT;
-				break;
-			}
-			put_reg(child, i, tmp);
-			data += sizeof(long);
-		}
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_GETFPREGS: { /* Get the child FP/Media state. */
-		ret = 0;
-		if (copy_to_user((void *) data,
-				 &child->thread.user->f,
-				 sizeof(child->thread.user->f)))
-			ret = -EFAULT;
-		break;
-	}
-
-	case PTRACE_SETFPREGS: { /* Set the child FP/Media state. */
-		ret = 0;
-		if (copy_from_user(&child->thread.user->f,
-				   (void *) data,
-				   sizeof(child->thread.user->f)))
-			ret = -EFAULT;
-		break;
-	}
+	case PTRACE_SETFPREGS:	/* Set the child FP/Media state. */
+		return copy_regset_from_user(child, &user_frv_native_view,
+					     REGSET_FPMEDIA,
+					     0, sizeof(child->thread.user->f),
+					     (const void __user *)data);
 
 	case PTRACE_GETFDPIC:
 		tmp = 0;
@@ -300,414 +365,36 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	default:
-		ret = -EIO;
+		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
 	return ret;
 }
 
-int __nongprelbss kstrace;
-
-static const struct {
-	const char	*name;
-	unsigned	argmask;
-} __syscall_name_table[NR_syscalls] = {
-	[0]	= { "restart_syscall"			},
-	[1]	= { "exit",		0x000001	},
-	[2]	= { "fork",		0xffffff	},
-	[3]	= { "read",		0x000141	},
-	[4]	= { "write",		0x000141	},
-	[5]	= { "open",		0x000235	},
-	[6]	= { "close",		0x000001	},
-	[7]	= { "waitpid",		0x000141	},
-	[8]	= { "creat",		0x000025	},
-	[9]	= { "link",		0x000055	},
-	[10]	= { "unlink",		0x000005	},
-	[11]	= { "execve",		0x000445	},
-	[12]	= { "chdir",		0x000005	},
-	[13]	= { "time",		0x000004	},
-	[14]	= { "mknod",		0x000325	},
-	[15]	= { "chmod",		0x000025	},
-	[16]	= { "lchown",		0x000025	},
-	[17]	= { "break" },
-	[18]	= { "oldstat",		0x000045	},
-	[19]	= { "lseek",		0x000131	},
-	[20]	= { "getpid",		0xffffff	},
-	[21]	= { "mount",		0x043555	},
-	[22]	= { "umount",		0x000005	},
-	[23]	= { "setuid",		0x000001	},
-	[24]	= { "getuid",		0xffffff	},
-	[25]	= { "stime",		0x000004	},
-	[26]	= { "ptrace",		0x004413	},
-	[27]	= { "alarm",		0x000001	},
-	[28]	= { "oldfstat",		0x000041	},
-	[29]	= { "pause",		0xffffff	},
-	[30]	= { "utime",		0x000045	},
-	[31]	= { "stty" },
-	[32]	= { "gtty" },
-	[33]	= { "access",		0x000025	},
-	[34]	= { "nice",		0x000001	},
-	[35]	= { "ftime" },
-	[36]	= { "sync",		0xffffff	},
-	[37]	= { "kill",		0x000011	},
-	[38]	= { "rename",		0x000055	},
-	[39]	= { "mkdir",		0x000025	},
-	[40]	= { "rmdir",		0x000005	},
-	[41]	= { "dup",		0x000001	},
-	[42]	= { "pipe",		0x000004	},
-	[43]	= { "times",		0x000004	},
-	[44]	= { "prof" },
-	[45]	= { "brk",		0x000004	},
-	[46]	= { "setgid",		0x000001	},
-	[47]	= { "getgid",		0xffffff	},
-	[48]	= { "signal",		0x000041	},
-	[49]	= { "geteuid",		0xffffff	},
-	[50]	= { "getegid",		0xffffff	},
-	[51]	= { "acct",		0x000005	},
-	[52]	= { "umount2",		0x000035	},
-	[53]	= { "lock" },
-	[54]	= { "ioctl",		0x000331	},
-	[55]	= { "fcntl",		0x000331	},
-	[56]	= { "mpx" },
-	[57]	= { "setpgid",		0x000011	},
-	[58]	= { "ulimit" },
-	[60]	= { "umask",		0x000002	},
-	[61]	= { "chroot",		0x000005	},
-	[62]	= { "ustat",		0x000043	},
-	[63]	= { "dup2",		0x000011	},
-	[64]	= { "getppid",		0xffffff	},
-	[65]	= { "getpgrp",		0xffffff	},
-	[66]	= { "setsid",		0xffffff	},
-	[67]	= { "sigaction" },
-	[68]	= { "sgetmask" },
-	[69]	= { "ssetmask" },
-	[70]	= { "setreuid" },
-	[71]	= { "setregid" },
-	[72]	= { "sigsuspend" },
-	[73]	= { "sigpending" },
-	[74]	= { "sethostname" },
-	[75]	= { "setrlimit" },
-	[76]	= { "getrlimit" },
-	[77]	= { "getrusage" },
-	[78]	= { "gettimeofday" },
-	[79]	= { "settimeofday" },
-	[80]	= { "getgroups" },
-	[81]	= { "setgroups" },
-	[82]	= { "select" },
-	[83]	= { "symlink" },
-	[84]	= { "oldlstat" },
-	[85]	= { "readlink" },
-	[86]	= { "uselib" },
-	[87]	= { "swapon" },
-	[88]	= { "reboot" },
-	[89]	= { "readdir" },
-	[91]	= { "munmap",		0x000034	},
-	[92]	= { "truncate" },
-	[93]	= { "ftruncate" },
-	[94]	= { "fchmod" },
-	[95]	= { "fchown" },
-	[96]	= { "getpriority" },
-	[97]	= { "setpriority" },
-	[99]	= { "statfs" },
-	[100]	= { "fstatfs" },
-	[102]	= { "socketcall" },
-	[103]	= { "syslog" },
-	[104]	= { "setitimer" },
-	[105]	= { "getitimer" },
-	[106]	= { "stat" },
-	[107]	= { "lstat" },
-	[108]	= { "fstat" },
-	[111]	= { "vhangup" },
-	[114]	= { "wait4" },
-	[115]	= { "swapoff" },
-	[116]	= { "sysinfo" },
-	[117]	= { "ipc" },
-	[118]	= { "fsync" },
-	[119]	= { "sigreturn" },
-	[120]	= { "clone" },
-	[121]	= { "setdomainname" },
-	[122]	= { "uname" },
-	[123]	= { "modify_ldt" },
-	[123]	= { "cacheflush" },
-	[124]	= { "adjtimex" },
-	[125]	= { "mprotect" },
-	[126]	= { "sigprocmask" },
-	[127]	= { "create_module" },
-	[128]	= { "init_module" },
-	[129]	= { "delete_module" },
-	[130]	= { "get_kernel_syms" },
-	[131]	= { "quotactl" },
-	[132]	= { "getpgid" },
-	[133]	= { "fchdir" },
-	[134]	= { "bdflush" },
-	[135]	= { "sysfs" },
-	[136]	= { "personality" },
-	[137]	= { "afs_syscall" },
-	[138]	= { "setfsuid" },
-	[139]	= { "setfsgid" },
-	[140]	= { "_llseek",			0x014331	},
-	[141]	= { "getdents" },
-	[142]	= { "_newselect",		0x000141	},
-	[143]	= { "flock" },
-	[144]	= { "msync" },
-	[145]	= { "readv" },
-	[146]	= { "writev" },
-	[147]	= { "getsid",			0x000001	},
-	[148]	= { "fdatasync",		0x000001	},
-	[149]	= { "_sysctl",			0x000004	},
-	[150]	= { "mlock" },
-	[151]	= { "munlock" },
-	[152]	= { "mlockall" },
-	[153]	= { "munlockall" },
-	[154]	= { "sched_setparam" },
-	[155]	= { "sched_getparam" },
-	[156]	= { "sched_setscheduler" },
-	[157]	= { "sched_getscheduler" },
-	[158]	= { "sched_yield" },
-	[159]	= { "sched_get_priority_max" },
-	[160]	= { "sched_get_priority_min" },
-	[161]	= { "sched_rr_get_interval" },
-	[162]	= { "nanosleep",		0x000044	},
-	[163]	= { "mremap" },
-	[164]	= { "setresuid" },
-	[165]	= { "getresuid" },
-	[166]	= { "vm86" },
-	[167]	= { "query_module" },
-	[168]	= { "poll" },
-	[169]	= { "nfsservctl" },
-	[170]	= { "setresgid" },
-	[171]	= { "getresgid" },
-	[172]	= { "prctl",			0x333331	},
-	[173]	= { "rt_sigreturn",		0xffffff	},
-	[174]	= { "rt_sigaction",		0x001441	},
-	[175]	= { "rt_sigprocmask",		0x001441	},
-	[176]	= { "rt_sigpending",		0x000014	},
-	[177]	= { "rt_sigtimedwait",		0x001444	},
-	[178]	= { "rt_sigqueueinfo",		0x000411	},
-	[179]	= { "rt_sigsuspend",		0x000014	},
-	[180]	= { "pread",			0x003341	},
-	[181]	= { "pwrite",			0x003341	},
-	[182]	= { "chown",			0x000115	},
-	[183]	= { "getcwd" },
-	[184]	= { "capget" },
-	[185]	= { "capset" },
-	[186]	= { "sigaltstack" },
-	[187]	= { "sendfile" },
-	[188]	= { "getpmsg" },
-	[189]	= { "putpmsg" },
-	[190]	= { "vfork",			0xffffff	},
-	[191]	= { "ugetrlimit" },
-	[192]	= { "mmap2",			0x313314	},
-	[193]	= { "truncate64" },
-	[194]	= { "ftruncate64" },
-	[195]	= { "stat64",			0x000045	},
-	[196]	= { "lstat64",			0x000045	},
-	[197]	= { "fstat64",			0x000041	},
-	[198]	= { "lchown32" },
-	[199]	= { "getuid32",			0xffffff	},
-	[200]	= { "getgid32",			0xffffff	},
-	[201]	= { "geteuid32",		0xffffff	},
-	[202]	= { "getegid32",		0xffffff	},
-	[203]	= { "setreuid32" },
-	[204]	= { "setregid32" },
-	[205]	= { "getgroups32" },
-	[206]	= { "setgroups32" },
-	[207]	= { "fchown32" },
-	[208]	= { "setresuid32" },
-	[209]	= { "getresuid32" },
-	[210]	= { "setresgid32" },
-	[211]	= { "getresgid32" },
-	[212]	= { "chown32" },
-	[213]	= { "setuid32" },
-	[214]	= { "setgid32" },
-	[215]	= { "setfsuid32" },
-	[216]	= { "setfsgid32" },
-	[217]	= { "pivot_root" },
-	[218]	= { "mincore" },
-	[219]	= { "madvise" },
-	[220]	= { "getdents64" },
-	[221]	= { "fcntl64" },
-	[223]	= { "security" },
-	[224]	= { "gettid" },
-	[225]	= { "readahead" },
-	[226]	= { "setxattr" },
-	[227]	= { "lsetxattr" },
-	[228]	= { "fsetxattr" },
-	[229]	= { "getxattr" },
-	[230]	= { "lgetxattr" },
-	[231]	= { "fgetxattr" },
-	[232]	= { "listxattr" },
-	[233]	= { "llistxattr" },
-	[234]	= { "flistxattr" },
-	[235]	= { "removexattr" },
-	[236]	= { "lremovexattr" },
-	[237]	= { "fremovexattr" },
-	[238]	= { "tkill" },
-	[239]	= { "sendfile64" },
-	[240]	= { "futex" },
-	[241]	= { "sched_setaffinity" },
-	[242]	= { "sched_getaffinity" },
-	[243]	= { "set_thread_area" },
-	[244]	= { "get_thread_area" },
-	[245]	= { "io_setup" },
-	[246]	= { "io_destroy" },
-	[247]	= { "io_getevents" },
-	[248]	= { "io_submit" },
-	[249]	= { "io_cancel" },
-	[250]	= { "fadvise64" },
-	[252]	= { "exit_group",		0x000001	},
-	[253]	= { "lookup_dcookie" },
-	[254]	= { "epoll_create" },
-	[255]	= { "epoll_ctl" },
-	[256]	= { "epoll_wait" },
-	[257]	= { "remap_file_pages" },
-	[258]	= { "set_tid_address" },
-	[259]	= { "timer_create" },
-	[260]	= { "timer_settime" },
-	[261]	= { "timer_gettime" },
-	[262]	= { "timer_getoverrun" },
-	[263]	= { "timer_delete" },
-	[264]	= { "clock_settime" },
-	[265]	= { "clock_gettime" },
-	[266]	= { "clock_getres" },
-	[267]	= { "clock_nanosleep" },
-	[268]	= { "statfs64" },
-	[269]	= { "fstatfs64" },
-	[270]	= { "tgkill" },
-	[271]	= { "utimes" },
-	[272]	= { "fadvise64_64" },
-	[273]	= { "vserver" },
-	[274]	= { "mbind" },
-	[275]	= { "get_mempolicy" },
-	[276]	= { "set_mempolicy" },
-	[277]	= { "mq_open" },
-	[278]	= { "mq_unlink" },
-	[279]	= { "mq_timedsend" },
-	[280]	= { "mq_timedreceive" },
-	[281]	= { "mq_notify" },
-	[282]	= { "mq_getsetattr" },
-	[283]	= { "sys_kexec_load" },
-};
-
-asmlinkage void do_syscall_trace(int leaving)
+/*
+ * handle tracing of system call entry
+ * - return the revised system call number or ULONG_MAX to cause ENOSYS
+ */
+asmlinkage unsigned long syscall_trace_entry(void)
 {
-#if 0
-	unsigned long *argp;
-	const char *name;
-	unsigned argmask;
-	char buffer[16];
-
-	if (!kstrace)
-		return;
-
-	if (!current->mm)
-		return;
-
-	if (__frame->gr7 == __NR_close)
-		return;
-
-#if 0
-	if (__frame->gr7 != __NR_mmap2 &&
-	    __frame->gr7 != __NR_vfork &&
-	    __frame->gr7 != __NR_execve &&
-	    __frame->gr7 != __NR_exit)
-		return;
-#endif
-
-	argmask = 0;
-	name = NULL;
-	if (__frame->gr7 < NR_syscalls) {
-		name = __syscall_name_table[__frame->gr7].name;
-		argmask = __syscall_name_table[__frame->gr7].argmask;
-	}
-	if (!name) {
-		sprintf(buffer, "sys_%lx", __frame->gr7);
-		name = buffer;
+	__frame->__status |= REG__STATUS_SYSC_ENTRY;
+	if (tracehook_report_syscall_entry(__frame)) {
+		/* tracing decided this syscall should not happen, so
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in
+		 * __frame->syscallno
+		 */
+		return ULONG_MAX;
 	}
 
-	if (!leaving) {
-		if (!argmask) {
-			printk(KERN_CRIT "[%d] %s(%lx,%lx,%lx,%lx,%lx,%lx)\n",
-			       current->pid,
-			       name,
-			       __frame->gr8,
-			       __frame->gr9,
-			       __frame->gr10,
-			       __frame->gr11,
-			       __frame->gr12,
-			       __frame->gr13);
-		}
-		else if (argmask == 0xffffff) {
-			printk(KERN_CRIT "[%d] %s()\n",
-			       current->pid,
-			       name);
-		}
-		else {
-			printk(KERN_CRIT "[%d] %s(",
-			       current->pid,
-			       name);
-
-			argp = &__frame->gr8;
-
-			do {
-				switch (argmask & 0xf) {
-				case 1:
-					printk("%ld", (long) *argp);
-					break;
-				case 2:
-					printk("%lo", *argp);
-					break;
-				case 3:
-					printk("%lx", *argp);
-					break;
-				case 4:
-					printk("%p", (void *) *argp);
-					break;
-				case 5:
-					printk("\"%s\"", (char *) *argp);
-					break;
-				}
-
-				argp++;
-				argmask >>= 4;
-				if (argmask)
-					printk(",");
-
-			} while (argmask);
-
-			printk(")\n");
-		}
-	}
-	else {
-		if ((int)__frame->gr8 > -4096 && (int)__frame->gr8 < 4096)
-			printk(KERN_CRIT "[%d] %s() = %ld\n", current->pid, name, __frame->gr8);
-		else
-			printk(KERN_CRIT "[%d] %s() = %lx\n", current->pid, name, __frame->gr8);
-	}
-	return;
-#endif
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-
-	/* we need to indicate entry or exit to strace */
-	if (leaving)
-		__frame->__status |= REG__STATUS_SYSC_EXIT;
-	else
-		__frame->__status |= REG__STATUS_SYSC_ENTRY;
-
-	ptrace_notify(SIGTRAP);
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	return __frame->syscallno;
+}
+
+/*
+ * handle tracing of system call exit
+ */
+asmlinkage void syscall_trace_exit(void)
+{
+	__frame->__status |= REG__STATUS_SYSC_EXIT;
+	tracehook_report_syscall_exit(__frame, 0);
 }

arch/frv/kernel/signal.c

@@ -21,6 +21,7 @@
 #include <linux/unistd.h>
 #include <linux/personality.h>
 #include <linux/freezer.h>
+#include <linux/tracehook.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
@@ -516,6 +517,9 @@ static void do_signal(void)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, __frame,
+						 test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
@@ -564,4 +568,10 @@ asmlinkage void do_notify_resume(__u32 thread_info_flags)
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal();
 
+	/* deal with notification on about to resume userspace execution */
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(__frame);
+	}
+
 } /* end do_notify_resume() */

arch/frv/kernel/uaccess.c

@@ -23,8 +23,7 @@ long strncpy_from_user(char *dst, const char __user *src, long count)
 	char *p, ch;
 	long err = -EFAULT;
 
-	if (count < 0)
-		BUG();
+	BUG_ON(count < 0);
 
 	p = dst;
 
@@ -76,8 +75,7 @@ long strnlen_user(const char __user *src, long count)
 	long err = 0;
 	char ch;
 
-	if (count < 0)
-		BUG();
+	BUG_ON(count < 0);
 
 #ifndef CONFIG_MMU
 	if ((unsigned long) src < memory_start)

arch/frv/mb93090-mb00/pci-dma-nommu.c

@@ -116,8 +116,7 @@ EXPORT_SYMBOL(dma_free_coherent);
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE)
-                BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
 
@@ -151,8 +150,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		frv_cache_wback_inv(sg_dma_address(&sg[i]),
 				    sg_dma_address(&sg[i]) + sg_dma_len(&sg[i]));
 
-	if (direction == DMA_NONE)
-                BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	return nents;
 }

arch/frv/mb93090-mb00/pci-dma.c

@@ -48,8 +48,7 @@ EXPORT_SYMBOL(dma_free_coherent);
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE)
-                BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
 
@@ -81,8 +80,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	void *vaddr;
 	int i;
 
-	if (direction == DMA_NONE)
-                BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	dampr2 = __get_DAMPR(2);
 

arch/ia64/hp/sim/hpsim_irq.c

@@ -21,9 +21,10 @@ hpsim_irq_noop (unsigned int irq)
 {
 }
 
-static void
+static int
 hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b)
 {
+	return 0;
 }
 
 static struct hw_interrupt_type irq_type_hp_sim = {

arch/ia64/include/asm/kvm_host.h

@@ -371,6 +371,7 @@ struct kvm_vcpu_arch {
 	int last_run_cpu;
 	int vmm_tr_slot;
 	int vm_tr_slot;
+	int sn_rtc_tr_slot;
 
 #define KVM_MP_STATE_RUNNABLE          0
 #define KVM_MP_STATE_UNINITIALIZED     1
@@ -465,6 +466,7 @@ struct kvm_arch {
 	unsigned long	vmm_init_rr;
 
 	int		online_vcpus;
+	int		is_sn2;
 
 	struct kvm_ioapic *vioapic;
 	struct kvm_vm_stat stat;
@@ -472,6 +474,7 @@ struct kvm_arch {
 
 	struct list_head assigned_dev_head;
 	struct iommu_domain *iommu_domain;
+	int iommu_flags;
 	struct hlist_head irq_ack_notifier_list;
 
 	unsigned long irq_sources_bitmap;
@@ -578,6 +581,8 @@ struct kvm_vmm_info{
 	kvm_vmm_entry 	*vmm_entry;
 	kvm_tramp_entry *tramp_entry;
 	unsigned long 	vmm_ivt;
+	unsigned long	patch_mov_ar;
+	unsigned long	patch_mov_ar_sn2;
 };
 
 int kvm_highest_pending_irq(struct kvm_vcpu *vcpu);
@@ -585,7 +590,6 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu);
 int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run);
 void kvm_sal_emul(struct kvm_vcpu *vcpu);
 
-static inline void kvm_inject_nmi(struct kvm_vcpu *vcpu) {}
 #endif /* __ASSEMBLY__*/
 
 #endif

arch/ia64/include/asm/pgtable.h

@@ -146,6 +146,8 @@
 #define PAGE_GATE	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX)
 #define PAGE_KERNEL	__pgprot(__DIRTY_BITS  | _PAGE_PL_0 | _PAGE_AR_RWX)
 #define PAGE_KERNELRX	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX)
+#define PAGE_KERNEL_UC	__pgprot(__DIRTY_BITS  | _PAGE_PL_0 | _PAGE_AR_RWX | \
+				 _PAGE_MA_UC)
 
 # ifndef __ASSEMBLY__
 

arch/ia64/kernel/acpi.c

@@ -636,7 +636,7 @@ void __init acpi_numa_arch_fixup(void)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
 {
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
 		return gsi;
@@ -678,7 +678,8 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
 
 	fadt = (struct acpi_table_fadt *)fadt_header;
 
-	acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
+	acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
+				 ACPI_ACTIVE_LOW);
 	return 0;
 }
 

arch/ia64/kernel/iosapic.c

@@ -329,7 +329,7 @@ unmask_irq (unsigned int irq)
 }
 
 
-static void
+static int
 iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 #ifdef CONFIG_SMP
@@ -343,15 +343,15 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	cpu = cpumask_first_and(cpu_online_mask, mask);
 	if (cpu >= nr_cpu_ids)
-		return;
+		return -1;
 
 	if (irq_prepare_move(irq, cpu))
-		return;
+		return -1;
 
 	dest = cpu_physical_id(cpu);
 
 	if (!iosapic_intr_info[irq].count)
-		return;			/* not an IOSAPIC interrupt */
+		return -1;			/* not an IOSAPIC interrupt */
 
 	set_irq_affinity_info(irq, dest, redir);
 
@@ -376,7 +376,9 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
 		iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32);
 		iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
 	}
+
 #endif
+	return 0;
 }
 
 /*

arch/ia64/kernel/irq_ia64.c

@@ -610,6 +610,9 @@ static struct irqaction ipi_irqaction = {
 	.name =		"IPI"
 };
 
+/*
+ * KVM uses this interrupt to force a cpu out of guest mode
+ */
 static struct irqaction resched_irqaction = {
 	.handler =	dummy_handler,
 	.flags =	IRQF_DISABLED,

arch/ia64/kernel/msi_ia64.c

@@ -12,7 +12,7 @@
 static struct irq_chip	ia64_msi_chip;
 
 #ifdef CONFIG_SMP
-static void ia64_set_msi_irq_affinity(unsigned int irq,
+static int ia64_set_msi_irq_affinity(unsigned int irq,
 				      const cpumask_t *cpu_mask)
 {
 	struct msi_msg msg;
@@ -20,10 +20,10 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
 	int cpu = first_cpu(*cpu_mask);
 
 	if (!cpu_online(cpu))
-		return;
+		return -1;
 
 	if (irq_prepare_move(irq, cpu))
-		return;
+		return -1;
 
 	read_msi_msg(irq, &msg);
 
@@ -39,6 +39,8 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
 
 	write_msi_msg(irq, &msg);
 	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
+
+	return 0;
 }
 #endif /* CONFIG_SMP */
 
@@ -130,17 +132,17 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 #ifdef CONFIG_DMAR
 #ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	struct irq_cfg *cfg = irq_cfg + irq;
 	struct msi_msg msg;
 	int cpu = cpumask_first(mask);
 
 	if (!cpu_online(cpu))
-		return;
+		return -1;
 
 	if (irq_prepare_move(irq, cpu))
-		return;
+		return -1;
 
 	dmar_msi_read(irq, &msg);
 
@@ -151,6 +153,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	dmar_msi_write(irq, &msg);
 	cpumask_copy(irq_desc[irq].affinity, mask);
+
+	return 0;
 }
 #endif /* CONFIG_SMP */
 

arch/ia64/kvm/Kconfig

@@ -23,7 +23,7 @@ if VIRTUALIZATION
 
 config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
-	depends on HAVE_KVM && EXPERIMENTAL
+	depends on HAVE_KVM && MODULES && EXPERIMENTAL
 	# for device assignment:
 	depends on PCI
 	select PREEMPT_NOTIFIERS

arch/ia64/kvm/kvm-ia64.c

@@ -41,6 +41,9 @@
 #include <asm/div64.h>
 #include <asm/tlb.h>
 #include <asm/elf.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/clksupport.h>
+#include <asm/sn/shub_mmr.h>
 
 #include "misc.h"
 #include "vti.h"
@@ -65,6 +68,16 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
+static unsigned long kvm_get_itc(struct kvm_vcpu *vcpu)
+{
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+	if (vcpu->kvm->arch.is_sn2)
+		return rtc_time();
+	else
+#endif
+		return ia64_getreg(_IA64_REG_AR_ITC);
+}
+
 static void kvm_flush_icache(unsigned long start, unsigned long len)
 {
 	int l;
@@ -119,8 +132,7 @@ void kvm_arch_hardware_enable(void *garbage)
 	unsigned long saved_psr;
 	int slot;
 
-	pte = pte_val(mk_pte_phys(__pa(kvm_vmm_base),
-				PAGE_KERNEL));
+	pte = pte_val(mk_pte_phys(__pa(kvm_vmm_base), PAGE_KERNEL));
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
 	local_irq_restore(saved_psr);
@@ -283,6 +295,18 @@ static int handle_sal_call(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 }
 
+static int __apic_accept_irq(struct kvm_vcpu *vcpu, uint64_t vector)
+{
+	struct vpd *vpd = to_host(vcpu->kvm, vcpu->arch.vpd);
+
+	if (!test_and_set_bit(vector, &vpd->irr[0])) {
+		vcpu->arch.irq_new_pending = 1;
+		kvm_vcpu_kick(vcpu);
+		return 1;
+	}
+	return 0;
+}
+
 /*
  *  offset: address offset to IPI space.
  *  value:  deliver value.
@@ -292,20 +316,20 @@ static void vcpu_deliver_ipi(struct kvm_vcpu *vcpu, uint64_t dm,
 {
 	switch (dm) {
 	case SAPIC_FIXED:
-		kvm_apic_set_irq(vcpu, vector, 0);
 		break;
 	case SAPIC_NMI:
-		kvm_apic_set_irq(vcpu, 2, 0);
+		vector = 2;
 		break;
 	case SAPIC_EXTINT:
-		kvm_apic_set_irq(vcpu, 0, 0);
+		vector = 0;
 		break;
 	case SAPIC_INIT:
 	case SAPIC_PMI:
 	default:
 		printk(KERN_ERR"kvm: Unimplemented Deliver reserved IPI!\n");
-		break;
+		return;
 	}
+	__apic_accept_irq(vcpu, vector);
 }
 
 static struct kvm_vcpu *lid_to_vcpu(struct kvm *kvm, unsigned long id,
@@ -413,6 +437,23 @@ static int handle_switch_rr6(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int kvm_sn2_setup_mappings(struct kvm_vcpu *vcpu)
+{
+	unsigned long pte, rtc_phys_addr, map_addr;
+	int slot;
+
+	map_addr = KVM_VMM_BASE + (1UL << KVM_VMM_SHIFT);
+	rtc_phys_addr = LOCAL_MMR_OFFSET | SH_RTC;
+	pte = pte_val(mk_pte_phys(rtc_phys_addr, PAGE_KERNEL_UC));
+	slot = ia64_itr_entry(0x3, map_addr, pte, PAGE_SHIFT);
+	vcpu->arch.sn_rtc_tr_slot = slot;
+	if (slot < 0) {
+		printk(KERN_ERR "Mayday mayday! RTC mapping failed!\n");
+		slot = 0;
+	}
+	return slot;
+}
+
 int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 {
 
@@ -426,7 +467,7 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 
 	if (irqchip_in_kernel(vcpu->kvm)) {
 
-		vcpu_now_itc = ia64_getreg(_IA64_REG_AR_ITC) + vcpu->arch.itc_offset;
+		vcpu_now_itc = kvm_get_itc(vcpu) + vcpu->arch.itc_offset;
 
 		if (time_after(vcpu_now_itc, vpd->itm)) {
 			vcpu->arch.timer_check = 1;
@@ -447,10 +488,10 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 		hrtimer_cancel(p_ht);
 		vcpu->arch.ht_active = 0;
 
-		if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests))
+		if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests) ||
+				kvm_cpu_has_pending_timer(vcpu))
 			if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED)
-				vcpu->arch.mp_state =
-					KVM_MP_STATE_RUNNABLE;
+				vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 
 		if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE)
 			return -EINTR;
@@ -551,22 +592,35 @@ static int kvm_insert_vmm_mapping(struct kvm_vcpu *vcpu)
 	if (r < 0)
 		goto out;
 	vcpu->arch.vm_tr_slot = r;
+
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+	if (kvm->arch.is_sn2) {
+		r = kvm_sn2_setup_mappings(vcpu);
+		if (r < 0)
+			goto out;
+	}
+#endif
+
 	r = 0;
 out:
 	return r;
-
 }
 
 static void kvm_purge_vmm_mapping(struct kvm_vcpu *vcpu)
 {
-
+	struct kvm *kvm = vcpu->kvm;
 	ia64_ptr_entry(0x3, vcpu->arch.vmm_tr_slot);
 	ia64_ptr_entry(0x3, vcpu->arch.vm_tr_slot);
-
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+	if (kvm->arch.is_sn2)
+		ia64_ptr_entry(0x3, vcpu->arch.sn_rtc_tr_slot);
+#endif
 }
 
 static int kvm_vcpu_pre_transition(struct kvm_vcpu *vcpu)
 {
+	unsigned long psr;
+	int r;
 	int cpu = smp_processor_id();
 
 	if (vcpu->arch.last_run_cpu != cpu ||
@@ -578,36 +632,27 @@ static int kvm_vcpu_pre_transition(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.host_rr6 = ia64_get_rr(RR6);
 	vti_set_rr6(vcpu->arch.vmm_rr);
-	return kvm_insert_vmm_mapping(vcpu);
+	local_irq_save(psr);
+	r = kvm_insert_vmm_mapping(vcpu);
+	local_irq_restore(psr);
+	return r;
 }
+
 static void kvm_vcpu_post_transition(struct kvm_vcpu *vcpu)
 {
 	kvm_purge_vmm_mapping(vcpu);
 	vti_set_rr6(vcpu->arch.host_rr6);
 }
 
-static int  vti_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	union context *host_ctx, *guest_ctx;
 	int r;
 
-	/*Get host and guest context with guest address space.*/
-	host_ctx = kvm_get_host_context(vcpu);
-	guest_ctx = kvm_get_guest_context(vcpu);
-
-	r = kvm_vcpu_pre_transition(vcpu);
-	if (r < 0)
-		goto out;
-	kvm_vmm_info->tramp_entry(host_ctx, guest_ctx);
-	kvm_vcpu_post_transition(vcpu);
-	r = 0;
-out:
-	return r;
-}
-
-static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
-{
-	int r;
+	/*
+	 * down_read() may sleep and return with interrupts enabled
+	 */
+	down_read(&vcpu->kvm->slots_lock);
 
 again:
 	if (signal_pending(current)) {
@@ -616,26 +661,31 @@ again:
 		goto out;
 	}
 
-	/*
-	 * down_read() may sleep and return with interrupts enabled
-	 */
-	down_read(&vcpu->kvm->slots_lock);
-
 	preempt_disable();
 	local_irq_disable();
 
-	vcpu->guest_mode = 1;
+	/*Get host and guest context with guest address space.*/
+	host_ctx = kvm_get_host_context(vcpu);
+	guest_ctx = kvm_get_guest_context(vcpu);
+
+	clear_bit(KVM_REQ_KICK, &vcpu->requests);
+
+	r = kvm_vcpu_pre_transition(vcpu);
+	if (r < 0)
+		goto vcpu_run_fail;
+
+	up_read(&vcpu->kvm->slots_lock);
 	kvm_guest_enter();
-	r = vti_vcpu_run(vcpu, kvm_run);
-	if (r < 0) {
-		local_irq_enable();
-		preempt_enable();
-		kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
-		goto out;
-	}
+
+	/*
+	 * Transition to the guest
+	 */
+	kvm_vmm_info->tramp_entry(host_ctx, guest_ctx);
+
+	kvm_vcpu_post_transition(vcpu);
 
 	vcpu->arch.launched = 1;
-	vcpu->guest_mode = 0;
+	set_bit(KVM_REQ_KICK, &vcpu->requests);
 	local_irq_enable();
 
 	/*
@@ -646,9 +696,10 @@ again:
 	 */
 	barrier();
 	kvm_guest_exit();
-	up_read(&vcpu->kvm->slots_lock);
 	preempt_enable();
 
+	down_read(&vcpu->kvm->slots_lock);
+
 	r = kvm_handle_exit(kvm_run, vcpu);
 
 	if (r > 0) {
@@ -657,12 +708,20 @@ again:
 	}
 
 out:
+	up_read(&vcpu->kvm->slots_lock);
 	if (r > 0) {
 		kvm_resched(vcpu);
+		down_read(&vcpu->kvm->slots_lock);
 		goto again;
 	}
 
 	return r;
+
+vcpu_run_fail:
+	local_irq_enable();
+	preempt_enable();
+	kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+	goto out;
 }
 
 static void kvm_set_mmio_data(struct kvm_vcpu *vcpu)
@@ -788,6 +847,9 @@ struct  kvm *kvm_arch_create_vm(void)
 
 	if (IS_ERR(kvm))
 		return ERR_PTR(-ENOMEM);
+
+	kvm->arch.is_sn2 = ia64_platform_is("sn2");
+
 	kvm_init_vm(kvm);
 
 	kvm->arch.online_vcpus = 0;
@@ -884,7 +946,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	RESTORE_REGS(saved_gp);
 
 	vcpu->arch.irq_new_pending = 1;
-	vcpu->arch.itc_offset = regs->saved_itc - ia64_getreg(_IA64_REG_AR_ITC);
+	vcpu->arch.itc_offset = regs->saved_itc - kvm_get_itc(vcpu);
 	set_bit(KVM_REQ_RESUME, &vcpu->requests);
 
 	vcpu_put(vcpu);
@@ -1043,10 +1105,6 @@ static void kvm_free_vmm_area(void)
 	}
 }
 
-static void vti_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
-{
-}
-
 static int vti_init_vpd(struct kvm_vcpu *vcpu)
 {
 	int i;
@@ -1165,7 +1223,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 		regs->cr_iip = PALE_RESET_ENTRY;
 
 		/*Initialize itc offset for vcpus*/
-		itc_offset = 0UL - ia64_getreg(_IA64_REG_AR_ITC);
+		itc_offset = 0UL - kvm_get_itc(vcpu);
 		for (i = 0; i < kvm->arch.online_vcpus; i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
@@ -1237,6 +1295,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id)
 
 	local_irq_save(psr);
 	r = kvm_insert_vmm_mapping(vcpu);
+	local_irq_restore(psr);
 	if (r)
 		goto fail;
 	r = kvm_vcpu_init(vcpu, vcpu->kvm, id);
@@ -1254,13 +1313,11 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id)
 		goto uninit;
 
 	kvm_purge_vmm_mapping(vcpu);
-	local_irq_restore(psr);
 
 	return 0;
 uninit:
 	kvm_vcpu_uninit(vcpu);
 fail:
-	local_irq_restore(psr);
 	return r;
 }
 
@@ -1291,7 +1348,6 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	vcpu->kvm = kvm;
 
 	cpu = get_cpu();
-	vti_vcpu_load(vcpu, cpu);
 	r = vti_vcpu_setup(vcpu, id);
 	put_cpu();
 
@@ -1427,7 +1483,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	}
 	for (i = 0; i < 4; i++)
 		regs->insvc[i] = vcpu->arch.insvc[i];
-	regs->saved_itc = vcpu->arch.itc_offset + ia64_getreg(_IA64_REG_AR_ITC);
+	regs->saved_itc = vcpu->arch.itc_offset + kvm_get_itc(vcpu);
 	SAVE_REGS(xtp);
 	SAVE_REGS(metaphysical_rr0);
 	SAVE_REGS(metaphysical_rr4);
@@ -1574,6 +1630,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 
 void kvm_arch_flush_shadow(struct kvm *kvm)
 {
+	kvm_flush_remote_tlbs(kvm);
 }
 
 long kvm_arch_dev_ioctl(struct file *filp,
@@ -1616,8 +1673,37 @@ out:
 	return 0;
 }
 
+
+/*
+ * On SN2, the ITC isn't stable, so copy in fast path code to use the
+ * SN2 RTC, replacing the ITC based default verion.
+ */
+static void kvm_patch_vmm(struct kvm_vmm_info *vmm_info,
+			  struct module *module)
+{
+	unsigned long new_ar, new_ar_sn2;
+	unsigned long module_base;
+
+	if (!ia64_platform_is("sn2"))
+		return;
+
+	module_base = (unsigned long)module->module_core;
+
+	new_ar = kvm_vmm_base + vmm_info->patch_mov_ar - module_base;
+	new_ar_sn2 = kvm_vmm_base + vmm_info->patch_mov_ar_sn2 - module_base;
+
+	printk(KERN_INFO "kvm: Patching ITC emulation to use SGI SN2 RTC "
+	       "as source\n");
+
+	/*
+	 * Copy the SN2 version of mov_ar into place. They are both
+	 * the same size, so 6 bundles is sufficient (6 * 0x10).
+	 */
+	memcpy((void *)new_ar, (void *)new_ar_sn2, 0x60);
+}
+
 static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info,
-						struct module *module)
+			    struct module *module)
 {
 	unsigned long module_base;
 	unsigned long vmm_size;
@@ -1639,6 +1725,7 @@ static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info,
 		return -EFAULT;
 
 	memcpy((void *)kvm_vmm_base, (void *)module_base, vmm_size);
+	kvm_patch_vmm(vmm_info, module);
 	kvm_flush_icache(kvm_vmm_base, vmm_size);
 
 	/*Recalculate kvm_vmm_info based on new VMM*/
@@ -1792,38 +1879,24 @@ void kvm_arch_hardware_unsetup(void)
 {
 }
 
-static void vcpu_kick_intr(void *info)
-{
-#ifdef DEBUG
-	struct kvm_vcpu *vcpu = (struct kvm_vcpu *)info;
-	printk(KERN_DEBUG"vcpu_kick_intr %p \n", vcpu);
-#endif
-}
-
 void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 {
-	int ipi_pcpu = vcpu->cpu;
-	int cpu = get_cpu();
+	int me;
+	int cpu = vcpu->cpu;
 
 	if (waitqueue_active(&vcpu->wq))
 		wake_up_interruptible(&vcpu->wq);
 
-	if (vcpu->guest_mode && cpu != ipi_pcpu)
-		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
+	me = get_cpu();
+	if (cpu != me && (unsigned) cpu < nr_cpu_ids && cpu_online(cpu))
+		if (!test_and_set_bit(KVM_REQ_KICK, &vcpu->requests))
+			smp_send_reschedule(cpu);
 	put_cpu();
 }
 
-int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
+int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq)
 {
-
-	struct vpd *vpd = to_host(vcpu->kvm, vcpu->arch.vpd);
-
-	if (!test_and_set_bit(vec, &vpd->irr[0])) {
-		vcpu->arch.irq_new_pending = 1;
-		kvm_vcpu_kick(vcpu);
-		return 1;
-	}
-	return 0;
+	return __apic_accept_irq(vcpu, irq->vector);
 }
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest)
@@ -1836,20 +1909,18 @@ int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda)
 	return 0;
 }
 
-struct kvm_vcpu *kvm_get_lowest_prio_vcpu(struct kvm *kvm, u8 vector,
-				       unsigned long bitmap)
+int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2)
 {
-	struct kvm_vcpu *lvcpu = kvm->vcpus[0];
-	int i;
+	return vcpu1->arch.xtp - vcpu2->arch.xtp;
+}
 
-	for (i = 1; i < kvm->arch.online_vcpus; i++) {
-		if (!kvm->vcpus[i])
-			continue;
-		if (lvcpu->arch.xtp > kvm->vcpus[i]->arch.xtp)
-			lvcpu = kvm->vcpus[i];
-	}
-
-	return lvcpu;
+int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
+		int short_hand, int dest, int dest_mode)
+{
+	struct kvm_lapic *target = vcpu->arch.apic;
+	return (dest_mode == 0) ?
+		kvm_apic_match_physical_addr(target, dest) :
+		kvm_apic_match_logical_addr(target, dest);
 }
 
 static int find_highest_bits(int *dat)
@@ -1888,6 +1959,12 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
+int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
+{
+	/* do real check here */
+	return 1;
+}
+
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.timer_fired;
@@ -1918,6 +1995,7 @@ static int vcpu_reset(struct kvm_vcpu *vcpu)
 	long psr;
 	local_irq_save(psr);
 	r = kvm_insert_vmm_mapping(vcpu);
+	local_irq_restore(psr);
 	if (r)
 		goto fail;
 
@@ -1930,7 +2008,6 @@ static int vcpu_reset(struct kvm_vcpu *vcpu)
 	kvm_purge_vmm_mapping(vcpu);
 	r = 0;
 fail:
-	local_irq_restore(psr);
 	return r;
 }
 

arch/ia64/kvm/kvm_fw.c

@@ -21,6 +21,9 @@
 
 #include <linux/kvm_host.h>
 #include <linux/smp.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/clksupport.h>
+#include <asm/sn/shub_mmr.h>
 
 #include "vti.h"
 #include "misc.h"
@@ -188,12 +191,35 @@ static struct ia64_pal_retval pal_freq_base(struct kvm_vcpu *vcpu)
 	return result;
 }
 
+/*
+ * On the SGI SN2, the ITC isn't stable. Emulation backed by the SN2
+ * RTC is used instead. This function patches the ratios from SAL
+ * to match the RTC before providing them to the guest.
+ */
+static void sn2_patch_itc_freq_ratios(struct ia64_pal_retval *result)
+{
+	struct pal_freq_ratio *ratio;
+	unsigned long sal_freq, sal_drift, factor;
+
+	result->status = ia64_sal_freq_base(SAL_FREQ_BASE_PLATFORM,
+					    &sal_freq, &sal_drift);
+	ratio = (struct pal_freq_ratio *)&result->v2;
+	factor = ((sal_freq * 3) + (sn_rtc_cycles_per_second / 2)) /
+		sn_rtc_cycles_per_second;
+
+	ratio->num = 3;
+	ratio->den = factor;
+}
+
 static struct ia64_pal_retval pal_freq_ratios(struct kvm_vcpu *vcpu)
 {
-
 	struct ia64_pal_retval result;
 
 	PAL_CALL(result, PAL_FREQ_RATIOS, 0, 0, 0);
+
+	if (vcpu->kvm->arch.is_sn2)
+		sn2_patch_itc_freq_ratios(&result);
+
 	return result;
 }
 

arch/ia64/kvm/lapic.h

@@ -20,6 +20,10 @@ void kvm_free_lapic(struct kvm_vcpu *vcpu);
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
-int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig);
+int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
+		int short_hand, int dest, int dest_mode);
+int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2);
+int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq);
+#define kvm_apic_present(x) (true)
 
 #endif

arch/ia64/kvm/optvfault.S

@@ -11,6 +11,7 @@
 
 #include <asm/asmmacro.h>
 #include <asm/processor.h>
+#include <asm/kvm_host.h>
 
 #include "vti.h"
 #include "asm-offsets.h"
@@ -140,6 +141,35 @@ GLOBAL_ENTRY(kvm_asm_mov_from_ar)
 	;;
 END(kvm_asm_mov_from_ar)
 
+/*
+ * Special SGI SN2 optimized version of mov_from_ar using the SN2 RTC
+ * clock as it's source for emulating the ITC. This version will be
+ * copied on top of the original version if the host is determined to
+ * be an SN2.
+ */
+GLOBAL_ENTRY(kvm_asm_mov_from_ar_sn2)
+	add r18=VMM_VCPU_ITC_OFS_OFFSET, r21
+	movl r19 = (KVM_VMM_BASE+(1<<KVM_VMM_SHIFT))
+
+	add r16=VMM_VCPU_LAST_ITC_OFFSET,r21
+	extr.u r17=r25,6,7
+	mov r24=b0
+	;;
+	ld8 r18=[r18]
+	ld8 r19=[r19]
+	addl r20=@gprel(asm_mov_to_reg),gp
+	;;
+	add r19=r19,r18
+	shladd r17=r17,4,r20
+	;;
+	adds r30=kvm_resume_to_guest-asm_mov_to_reg,r20
+	st8 [r16] = r19
+	mov b0=r17
+	br.sptk.few b0
+	;;
+END(kvm_asm_mov_from_ar_sn2)
+
+
 
 // mov r1=rr[r3]
 GLOBAL_ENTRY(kvm_asm_mov_from_rr)

arch/ia64/kvm/process.c

@@ -652,20 +652,25 @@ void  kvm_ia64_handle_break(unsigned long ifa, struct kvm_pt_regs *regs,
 		unsigned long isr, unsigned long iim)
 {
 	struct kvm_vcpu *v = current_vcpu;
+	long psr;
 
 	if (ia64_psr(regs)->cpl == 0) {
 		/* Allow hypercalls only when cpl = 0.  */
 		if (iim == DOMN_PAL_REQUEST) {
+			local_irq_save(psr);
 			set_pal_call_data(v);
 			vmm_transition(v);
 			get_pal_call_result(v);
 			vcpu_increment_iip(v);
+			local_irq_restore(psr);
 			return;
 		} else if (iim == DOMN_SAL_REQUEST) {
+			local_irq_save(psr);
 			set_sal_call_data(v);
 			vmm_transition(v);
 			get_sal_call_result(v);
 			vcpu_increment_iip(v);
+			local_irq_restore(psr);
 			return;
 		}
 	}

arch/ia64/kvm/vcpu.c

@@ -788,13 +788,29 @@ void vcpu_set_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
 		setfpreg(reg, val, regs);   /* FIXME: handle NATs later*/
 }
 
+/*
+ * The Altix RTC is mapped specially here for the vmm module
+ */
+#define SN_RTC_BASE	(u64 *)(KVM_VMM_BASE+(1UL<<KVM_VMM_SHIFT))
+static long kvm_get_itc(struct kvm_vcpu *vcpu)
+{
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+	struct kvm *kvm = (struct kvm *)KVM_VM_BASE;
+
+	if (kvm->arch.is_sn2)
+		return (*SN_RTC_BASE);
+	else
+#endif
+		return ia64_getreg(_IA64_REG_AR_ITC);
+}
+
 /************************************************************************
  * lsapic timer
  ***********************************************************************/
 u64 vcpu_get_itc(struct kvm_vcpu *vcpu)
 {
 	unsigned long guest_itc;
-	guest_itc = VMX(vcpu, itc_offset) + ia64_getreg(_IA64_REG_AR_ITC);
+	guest_itc = VMX(vcpu, itc_offset) + kvm_get_itc(vcpu);
 
 	if (guest_itc >= VMX(vcpu, last_itc)) {
 		VMX(vcpu, last_itc) = guest_itc;
@@ -809,7 +825,7 @@ static void vcpu_set_itc(struct kvm_vcpu *vcpu, u64 val)
 	struct kvm_vcpu *v;
 	struct kvm *kvm;
 	int i;
-	long itc_offset = val - ia64_getreg(_IA64_REG_AR_ITC);
+	long itc_offset = val - kvm_get_itc(vcpu);
 	unsigned long vitv = VCPU(vcpu, itv);
 
 	kvm = (struct kvm *)KVM_VM_BASE;

arch/ia64/kvm/vmm.c

@@ -30,15 +30,19 @@ MODULE_AUTHOR("Intel");
 MODULE_LICENSE("GPL");
 
 extern char kvm_ia64_ivt;
+extern char kvm_asm_mov_from_ar;
+extern char kvm_asm_mov_from_ar_sn2;
 extern fpswa_interface_t *vmm_fpswa_interface;
 
 long vmm_sanity = 1;
 
 struct kvm_vmm_info vmm_info = {
-	.module	     = THIS_MODULE,
-	.vmm_entry   = vmm_entry,
-	.tramp_entry = vmm_trampoline,
-	.vmm_ivt     = (unsigned long)&kvm_ia64_ivt,
+	.module			= THIS_MODULE,
+	.vmm_entry		= vmm_entry,
+	.tramp_entry		= vmm_trampoline,
+	.vmm_ivt		= (unsigned long)&kvm_ia64_ivt,
+	.patch_mov_ar		= (unsigned long)&kvm_asm_mov_from_ar,
+	.patch_mov_ar_sn2	= (unsigned long)&kvm_asm_mov_from_ar_sn2,
 };
 
 static int __init  kvm_vmm_init(void)

arch/ia64/kvm/vmm_ivt.S

@@ -95,7 +95,7 @@ GLOBAL_ENTRY(kvm_vmm_panic)
 	;;
 	srlz.i    // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -249,7 +249,7 @@ ENTRY(kvm_break_fault)
 	;;
 	srlz.i         // guarantee that interruption collection is on
 	;;
-	//(p15)ssm psr.i               // restore psr.i
+	(p15)ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -439,7 +439,7 @@ kvm_dispatch_vexirq:
 	;;
 	srlz.i // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	adds r3=8,r2                // set up second base pointer
 	;;
 	KVM_SAVE_REST
@@ -819,7 +819,7 @@ ENTRY(kvm_dtlb_miss_dispatch)
 	;;
 	srlz.i     // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor_prepare),gp
 	;;
 	KVM_SAVE_REST
@@ -842,7 +842,7 @@ ENTRY(kvm_itlb_miss_dispatch)
 	;;
 	srlz.i   // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -871,7 +871,7 @@ ENTRY(kvm_dispatch_reflection)
 	;;
 	srlz.i   // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -898,7 +898,7 @@ ENTRY(kvm_dispatch_virtualization_fault)
 	;;
 	srlz.i    // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor_prepare),gp
 	;;
 	KVM_SAVE_REST
@@ -920,7 +920,7 @@ ENTRY(kvm_dispatch_interrupt)
 	;;
 	srlz.i
 	;;
-	//(p15) ssm psr.i
+	(p15) ssm psr.i
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -1333,7 +1333,7 @@ hostret =   r24
 	;;
 (p7)    srlz.i
 	;;
-//(p6)    ssm psr.i
+(p6)    ssm psr.i
 	;;
 	mov rp=rpsave
 	mov ar.pfs=pfssave

arch/ia64/kvm/vtlb.c

@@ -254,7 +254,8 @@ u64 guest_vhpt_lookup(u64 iha, u64 *pte)
 			"(p7) st8 [%2]=r9;;"
 			"ssm psr.ic;;"
 			"srlz.d;;"
-			/* "ssm psr.i;;" Once interrupts in vmm open, need fix*/
+			"ssm psr.i;;"
+			"srlz.d;;"
 			: "=r"(ret) : "r"(iha), "r"(pte):"memory");
 
 	return ret;

arch/ia64/sn/kernel/irq.c

@@ -227,7 +227,7 @@ finish_up:
 	return new_irq_info;
 }
 
-static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
+static int sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
 {
 	struct sn_irq_info *sn_irq_info, *sn_irq_info_safe;
 	nasid_t nasid;
@@ -239,6 +239,8 @@ static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
 	list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe,
 				 sn_irq_lh[irq], list)
 		(void)sn_retarget_vector(sn_irq_info, nasid, slice);
+
+	return 0;
 }
 
 #ifdef CONFIG_SMP

arch/ia64/sn/kernel/msi_sn.c

@@ -151,7 +151,7 @@ int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry)
 }
 
 #ifdef CONFIG_SMP
-static void sn_set_msi_irq_affinity(unsigned int irq,
+static int sn_set_msi_irq_affinity(unsigned int irq,
 				    const struct cpumask *cpu_mask)
 {
 	struct msi_msg msg;
@@ -168,7 +168,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 	cpu = cpumask_first(cpu_mask);
 	sn_irq_info = sn_msi_info[irq].sn_irq_info;
 	if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
-		return;
+		return -1;
 
 	/*
 	 * Release XIO resources for the old MSI PCI address
@@ -189,7 +189,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 	new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice);
 	sn_msi_info[irq].sn_irq_info = new_irq_info;
 	if (new_irq_info == NULL)
-		return;
+		return -1;
 
 	/*
 	 * Map the xio address into bus space
@@ -206,6 +206,8 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 
 	write_msi_msg(irq, &msg);
 	cpumask_copy(irq_desc[irq].affinity, cpu_mask);
+
+	return 0;
 }
 #endif /* CONFIG_SMP */
 

arch/m68k/include/asm/m520xsim.h

@@ -59,5 +59,14 @@
 #define MCFPIT_IMR		MCFINTC_IMRL
 #define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
 
+/*
+ *  Reset Controll Unit.
+ */
+#define	MCF_RCR			0xFC0A0000
+#define	MCF_RSR			0xFC0A0001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /****************************************************************************/
 #endif  /* m520xsim_h */

arch/m68k/include/asm/m523xsim.h

@@ -41,5 +41,14 @@
 #define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
 #define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
 
+/*
+ *  Reset Controll Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			0x110000
+#define	MCF_RSR			0x110001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /****************************************************************************/
 #endif	/* m523xsim_h */

arch/m68k/include/asm/m527xsim.h

@@ -70,5 +70,14 @@
 #define UART2_ENABLE_MASK	0x3f00 
 #endif
 
+/*
+ *  Reset Controll Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			0x110000
+#define	MCF_RSR			0x110001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /****************************************************************************/
 #endif	/* m527xsim_h */

arch/m68k/include/asm/m528xsim.h

@@ -56,6 +56,14 @@
 #define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
 
 
+/*
+ *  Reset Control Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			0x110000
+#define	MCF_RSR			0x110001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
 /*********************************************************************
 *

arch/m68k/include/asm/m532xsim.h

@@ -125,6 +125,18 @@
 #define	ACR_CM_OFF_IMP		(3<<5)
 #define	ACR_WPROTECT		(1<<2)
 
+/*********************************************************************
+ *
+ * Reset Controller Module
+ *
+ *********************************************************************/
+
+#define	MCF_RCR			0xFC0A0000
+#define	MCF_RSR			0xFC0A0001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /*********************************************************************
  *
  * Inter-IC (I2C) Module

arch/m68k/include/asm/processor_no.h

@@ -72,10 +72,10 @@ struct thread_struct {
 	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
 };
 
-#define INIT_THREAD  { \
-	sizeof(init_stack) + (unsigned long) init_stack, 0, \
-	PS_S, __KERNEL_DS, \
-	{0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+#define INIT_THREAD  {							\
+	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
+	.sr	= PS_S,							\
+	.fs	= __KERNEL_DS,						\
 }
 
 /*

arch/m68k/include/asm/swab.h

@@ -1,7 +1,7 @@
 #ifndef _M68K_SWAB_H
 #define _M68K_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 #define __SWAB_64_THRU_32__

arch/m68k/include/asm/system_no.h

@@ -203,113 +203,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 #include <asm-generic/cmpxchg.h>
 #endif
 
-#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
-	defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
-#define HARD_RESET_NOW() ({		\
-        local_irq_disable();		\
-        asm("				\
-        moveal #0x10c00000, %a0;	\
-        moveb #0, 0xFFFFF300;		\
-        moveal 0(%a0), %sp;		\
-        moveal 4(%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-
-#ifdef CONFIG_COLDFIRE
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-/*
- * Need to account for broken early mask of 5272 silicon. So don't
- * jump through the original start address. Jump strait into the
- * known start of the FLASH code.
- */
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        jmp 0xf0000400;			\
-        ");				\
-})
-#elif defined(CONFIG_NETtel) || \
-      defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-	moveal #0x10000044, %a0;	\
-	movel #0xffffffff, (%a0);	\
-	moveal #0x10000001, %a0;	\
-	moveb #0x00, (%a0);		\
-        moveal #0xf0000004, %a0;	\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#elif defined(CONFIG_M5272)
-/*
- * Retrieve the boot address in flash using CSBR0 and CSOR0
- * find the reset vector at flash_address + 4 (e.g. 0x400)
- * remap it in the flash's current location (e.g. 0xf0000400)
- * and jump there.
- */ 
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %%sr;		\
-	move.l	%0+0x40,%%d0;		\
-	and.l	%0+0x44,%%d0;		\
-	andi.l	#0xfffff000,%%d0;	\
-	mov.l	%%d0,%%a0;		\
-	or.l	4(%%a0),%%d0;		\
-	mov.l	%%d0,%%a0;		\
-	jmp (%%a0);"			\
-	: /* No output */		\
-	: "o" (*(char *)MCF_MBAR) );	\
-})
-#elif defined(CONFIG_M528x)
-/*
- * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
- * that when set, resets the MCF528x.
- */
-#define HARD_RESET_NOW() \
-({						\
-	unsigned char volatile *reset;		\
-	asm("move.w	#0x2700, %sr");		\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000));	\
-	while(1)				\
-	*reset |= (0x01 << 7);\
-})
-#elif defined(CONFIG_M523x)
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %sr;		\
-	movel #0x01000000, %sp;		\
-	moveal #0x40110000, %a0;	\
-	moveb #0x80, (%a0);		\
-	");				\
-})
-#elif defined(CONFIG_M520x)
-	/*
-	 * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register 
-	 * RCR), that when set, resets the MCF5208.
-	 */
-#define HARD_RESET_NOW() 		\
-({					\
-	unsigned char volatile *reset;	\
-	asm("move.w     #0x2700, %sr");	\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000));	\
-	while(1)			\
-		*reset |= 0x80;		\
-})
-#else
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        moveal #0x4, %a0;		\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-#endif
 #define arch_align_stack(x) (x)
 
 

arch/m68knommu/kernel/entry.S

@@ -26,7 +26,6 @@
 
 #include <linux/sys.h>
 #include <linux/linkage.h>
-#include <asm/thread_info.h>
 #include <asm/errno.h>
 #include <asm/setup.h>
 #include <asm/segment.h>

arch/m68knommu/kernel/setup.c

@@ -166,15 +166,13 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
 #endif
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
-		"BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
-		(int) &_sdata, (int) &_edata,
-		(int) &_sbss, (int) &_ebss);
-	printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
-		(int) &_ebss, (int) memory_start,
-		(int) memory_start, (int) memory_end);
-#endif
+	pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
+		 "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
+		 (int) &_sdata, (int) &_edata,
+		 (int) &_sbss, (int) &_ebss);
+	pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
+		 (int) &_ebss, (int) memory_start,
+		 (int) memory_start, (int) memory_end);
 
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];

arch/m68knommu/mm/init.c

@@ -126,9 +126,7 @@ void __init mem_init(void)
 	unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
 	unsigned long end_mem   = memory_end; /* DAVIDM - this must not include kernel stack at top */
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
-#endif
+	pr_debug("Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
 
 	end_mem &= PAGE_MASK;
 	high_memory = (void *) end_mem;

arch/m68knommu/platform/5206/config.c

@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,10 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5206_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -109,10 +104,21 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5206_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
-	mach_reset = coldfire_reset;
+	mach_reset = m5206_cpu_reset;
 }
 
 /***************************************************************************/

arch/m68knommu/platform/5206e/config.c

@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,10 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5206e_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -109,6 +104,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5206e_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -119,7 +125,7 @@ void __init config_BSP(char *commandp, int size)
 	commandp[size-1] = 0;
 #endif /* CONFIG_NETtel */
 
-	mach_reset = coldfire_reset;
+	mach_reset = m5206e_cpu_reset;
 }
 
 /***************************************************************************/

arch/m68knommu/platform/520x/config.c

@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -23,10 +22,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m520x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -169,9 +164,17 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+static void m520x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = coldfire_reset;
+	mach_reset = m520x_cpu_reset;
 	m520x_uarts_init();
 	m520x_fec_init();
 }

arch/m68knommu/platform/523x/config.c

@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -24,10 +23,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m523x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -145,13 +140,20 @@ void mcf_autovector(unsigned int vec)
 {
 	/* Everything is auto-vectored on the 523x */
 }
+/***************************************************************************/
+
+static void m523x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
+}
 
 /***************************************************************************/
 
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_disableall();
-	mach_reset = coldfire_reset;
+	mach_reset = m523x_cpu_reset;
 	m523x_uarts_init();
 	m523x_fec_init();
 }

arch/m68knommu/platform/5249/config.c

@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -20,10 +19,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5249_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -106,10 +101,21 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5249_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
-	mach_reset = coldfire_reset;
+	mach_reset = m5249_cpu_reset;
 }
 
 /***************************************************************************/

arch/m68knommu/platform/5272/config.c

@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,8 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -170,6 +167,19 @@ void mcf_settimericr(int timer, int level)
 
 /***************************************************************************/
 
+static void m5272_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to reset, and enabled */
+	__raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
+	__raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
+	__raw_writew(0, MCF_MBAR + MCFSIM_WCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 #if defined (CONFIG_MOD5272)
@@ -194,7 +204,7 @@ void __init config_BSP(char *commandp, int size)
 
 	mcf_timervector = 69;
 	mcf_profilevector = 70;
-	mach_reset = coldfire_reset;
+	mach_reset = m5272_cpu_reset;
 }
 
 /***************************************************************************/

arch/m68knommu/platform/527x/config.c

@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -24,10 +23,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m527x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -227,10 +222,18 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+static void m527x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_disableall();
-	mach_reset = coldfire_reset;
+	mach_reset = m527x_cpu_reset;
 	m527x_uarts_init();
 	m527x_fec_init();
 }

arch/m68knommu/platform/528x/config.c

@@ -31,10 +31,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m528x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -171,6 +167,14 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+static void m528x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
+}
+
+/***************************************************************************/
+
 #ifdef CONFIG_WILDFIRE
 void wildfire_halt(void)
 {
@@ -214,6 +218,7 @@ void __init config_BSP(char *commandp, int size)
 
 static int __init init_BSP(void)
 {
+	mach_reset = m528x_cpu_reset;
 	m528x_uarts_init();
 	m528x_fec_init();
 	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));

arch/m68knommu/platform/5307/config.c

@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -22,8 +21,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -119,6 +116,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5307_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -134,7 +142,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_timerlevel = 6;
 #endif
 
-	mach_reset = coldfire_reset;
+	mach_reset = m5307_cpu_reset;
 
 #ifdef CONFIG_BDM_DISABLE
 	/*

arch/m68knommu/platform/532x/config.c

@@ -31,8 +31,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -164,6 +162,14 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+static void m532x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -181,7 +187,7 @@ void __init config_BSP(char *commandp, int size)
 
 	mcf_timervector = 64+32;
 	mcf_profilevector = 64+33;
-	mach_reset = coldfire_reset;
+	mach_reset = m532x_cpu_reset;
 
 #ifdef CONFIG_BDM_DISABLE
 	/*

arch/m68knommu/platform/5407/config.c

@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,8 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -110,6 +107,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5407_cpu_reset(void)
+{
+	local_irq_disable();
+	/* set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -121,7 +129,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_timerlevel = 6;
 #endif
 
-	mach_reset = coldfire_reset;
+	mach_reset = m5407_cpu_reset;
 }
 
 /***************************************************************************/

arch/m68knommu/platform/coldfire/vectors.c

@@ -96,10 +96,3 @@ void ack_vector(unsigned int irq)
 }
 
 /***************************************************************************/
-
-void coldfire_reset(void)
-{
-	HARD_RESET_NOW();
-}
-
-/***************************************************************************/

arch/mips/cavium-octeon/octeon-irq.c

@@ -177,7 +177,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu;
 	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
@@ -199,6 +199,8 @@ static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
 	write_unlock(&octeon_irq_ciu0_rwlock);
+
+	return 0;
 }
 #endif
 
@@ -292,7 +294,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu;
 	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
@@ -315,6 +317,8 @@ static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
 	write_unlock(&octeon_irq_ciu1_rwlock);
+
+	return 0;
 }
 #endif
 

arch/mips/include/asm/irq.h

@@ -49,7 +49,7 @@ static inline void smtc_im_ack_irq(unsigned int irq)
 #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
 #include <linux/cpumask.h>
 
-extern void plat_set_irq_affinity(unsigned int irq,
+extern int plat_set_irq_affinity(unsigned int irq,
 				  const struct cpumask *affinity);
 extern void smtc_forward_irq(unsigned int irq);
 

arch/mips/kernel/irq-gic.c

@@ -155,7 +155,7 @@ static void gic_unmask_irq(unsigned int irq)
 
 static DEFINE_SPINLOCK(gic_lock);
 
-static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 {
 	cpumask_t	tmp = CPU_MASK_NONE;
 	unsigned long	flags;
@@ -166,7 +166,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 
 	cpumask_and(&tmp, cpumask, cpu_online_mask);
 	if (cpus_empty(tmp))
-		return;
+		return -1;
 
 	/* Assumption : cpumask refers to a single CPU */
 	spin_lock_irqsave(&gic_lock, flags);
@@ -190,6 +190,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	cpumask_copy(irq_desc[irq].affinity, cpumask);
 	spin_unlock_irqrestore(&gic_lock, flags);
 
+	return 0;
 }
 #endif
 

arch/mips/mti-malta/malta-smtc.c

@@ -114,7 +114,7 @@ struct plat_smp_ops msmtc_smp_ops = {
  */
 
 
-void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
+int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 {
 	cpumask_t tmask;
 	int cpu = 0;
@@ -156,5 +156,7 @@ void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 
 	/* Do any generic SMTC IRQ affinity setup */
 	smtc_set_irq_affinity(irq, tmask);
+
+	return 0;
 }
 #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */

arch/mips/sibyte/bcm1480/irq.c

@@ -50,7 +50,7 @@ static void enable_bcm1480_irq(unsigned int irq);
 static void disable_bcm1480_irq(unsigned int irq);
 static void ack_bcm1480_irq(unsigned int irq);
 #ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
 #endif
 
 #ifdef CONFIG_PCI
@@ -109,7 +109,7 @@ void bcm1480_unmask_irq(int cpu, int irq)
 }
 
 #ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on, k;
 	u64 cur_ints;
@@ -118,7 +118,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	if (cpumask_weight(mask) != 1) {
 		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return;
+		return -1;
 	}
 	i = cpumask_first(mask);
 
@@ -152,6 +152,8 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 		}
 	}
 	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+
+	return 0;
 }
 #endif
 

arch/mips/sibyte/sb1250/irq.c

@@ -50,7 +50,7 @@ static void enable_sb1250_irq(unsigned int irq);
 static void disable_sb1250_irq(unsigned int irq);
 static void ack_sb1250_irq(unsigned int irq);
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
 #endif
 
 #ifdef CONFIG_SIBYTE_HAS_LDT
@@ -103,7 +103,7 @@ void sb1250_unmask_irq(int cpu, int irq)
 }
 
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on;
 	u64 cur_ints;
@@ -113,7 +113,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	if (cpumask_weight(mask) > 1) {
 		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return;
+		return -1;
 	}
 
 	/* Convert logical CPU to physical CPU */
@@ -143,6 +143,8 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 					R_IMR_INTERRUPT_MASK));
 	}
 	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+
+	return 0;
 }
 #endif
 

arch/mn10300/Kconfig

@@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration"
 config MN10300
 	def_bool y
 	select HAVE_OPROFILE
+	select HAVE_ARCH_TRACEHOOK
 
 config AM33
 	def_bool y

arch/mn10300/include/asm/elf.h

@@ -34,7 +34,7 @@
  */
 typedef unsigned long elf_greg_t;
 
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+#define ELF_NGREG ((sizeof(struct pt_regs) / sizeof(elf_greg_t)) - 1)
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 #define ELF_NFPREG 32
@@ -76,6 +76,7 @@ do {									\
 } while (0)
 
 #define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
 #define ELF_EXEC_PAGESIZE	4096
 
 /*

arch/mn10300/include/asm/processor.h

@@ -143,13 +143,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
 
 unsigned long get_wchan(struct task_struct *p);
 
-#define task_pt_regs(task)						\
-({									\
-       struct pt_regs *__regs__;					\
-       __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
-       __regs__ - 1;							\
-})
-
+#define task_pt_regs(task) ((task)->thread.uregs)
 #define KSTK_EIP(task) (task_pt_regs(task)->pc)
 #define KSTK_ESP(task) (task_pt_regs(task)->sp)
 

arch/mn10300/include/asm/ptrace.h

@@ -91,9 +91,17 @@ extern struct pt_regs *__frame; /* current frame pointer */
 #if defined(__KERNEL__)
 
 #if !defined(__ASSEMBLY__)
+struct task_struct;
+
 #define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)
 #define instruction_pointer(regs)	((regs)->pc)
+#define user_stack_pointer(regs)	((regs)->sp)
 extern void show_regs(struct pt_regs *);
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
 #endif  /*  !__ASSEMBLY  */
 
 #define profile_pc(regs) ((regs)->pc)

arch/mn10300/kernel/entry.S

@@ -76,7 +76,7 @@ ENTRY(system_call)
 	cmp	nr_syscalls,d0
 	bcc	syscall_badsys
 	btst	_TIF_SYSCALL_TRACE,(TI_flags,a2)
-	bne	syscall_trace_entry
+	bne	syscall_entry_trace
 syscall_call:
 	add	d0,d0,a1
 	add	a1,a1
@@ -104,11 +104,10 @@ restore_all:
 syscall_exit_work:
 	btst	_TIF_SYSCALL_TRACE,d2
 	beq	work_pending
-	__sti				# could let do_syscall_trace() call
+	__sti				# could let syscall_trace_exit() call
 					# schedule() instead
 	mov	fp,d0
-	mov	1,d1
-	call	do_syscall_trace[],0	# do_syscall_trace(regs,entryexit)
+	call	syscall_trace_exit[],0	# do_syscall_trace(regs)
 	jmp	resume_userspace
 
 	ALIGN
@@ -138,13 +137,11 @@ work_notifysig:
 	jmp	resume_userspace
 
 	# perform syscall entry tracing
-syscall_trace_entry:
+syscall_entry_trace:
 	mov	-ENOSYS,d0
 	mov	d0,(REG_D0,fp)
 	mov	fp,d0
-	clr	d1
-	call	do_syscall_trace[],0
-	mov	(REG_ORIG_D0,fp),d0
+	call	syscall_trace_entry[],0	# returns the syscall number to actually use
 	mov	(REG_D1,fp),d1
 	cmp	nr_syscalls,d0
 	bcs	syscall_call

arch/mn10300/kernel/ptrace.c

@@ -17,6 +17,9 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
+#include <linux/tracehook.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -64,12 +67,6 @@ static inline int get_stack_long(struct task_struct *task, int offset)
 		((unsigned long) task->thread.uregs + offset);
 }
 
-/*
- * this routine will put a word on the processes privileged stack.
- * the offset is how far from the base addr as stored in the TSS.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
 static inline
 int put_stack_long(struct task_struct *task, int offset, unsigned long data)
 {
@@ -80,44 +77,191 @@ int put_stack_long(struct task_struct *task, int offset, unsigned long data)
 	return 0;
 }
 
-static inline unsigned long get_fpregs(struct fpu_state_struct *buf,
-				       struct task_struct *tsk)
+/*
+ * retrieve the contents of MN10300 userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
 {
-	return __copy_to_user(buf, &tsk->thread.fpu_state,
-			      sizeof(struct fpu_state_struct));
-}
+	const struct pt_regs *regs = task_pt_regs(target);
+	int ret;
 
-static inline unsigned long set_fpregs(struct task_struct *tsk,
-				       struct fpu_state_struct *buf)
-{
-	return __copy_from_user(&tsk->thread.fpu_state, buf,
-				sizeof(struct fpu_state_struct));
-}
+	/* we need to skip regs->next */
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs, 0, PT_ORIG_D0 * sizeof(long));
+	if (ret < 0)
+		return ret;
 
-static inline void fpsave_init(struct task_struct *task)
-{
-	memset(&task->thread.fpu_state, 0, sizeof(struct fpu_state_struct));
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &regs->orig_d0, PT_ORIG_D0 * sizeof(long),
+				  NR_PTREGS * sizeof(long));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					NR_PTREGS * sizeof(long), -1);
 }
 
 /*
- * make sure the single step bit is not set
+ * update the contents of the MN10300 userspace general registers
  */
-void ptrace_disable(struct task_struct *child)
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
 {
-#ifndef CONFIG_MN10300_USING_JTAG
-	struct user *dummy = NULL;
-	long tmp;
+	struct pt_regs *regs = task_pt_regs(target);
+	unsigned long tmp;
+	int ret;
 
-	tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
-	tmp &= ~EPSW_T;
-	put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
-#endif
+	/* we need to skip regs->next */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 regs, 0, PT_ORIG_D0 * sizeof(long));
+	if (ret < 0)
+		return ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &regs->orig_d0, PT_ORIG_D0 * sizeof(long),
+				 PT_EPSW * sizeof(long));
+	if (ret < 0)
+		return ret;
+
+	/* we need to mask off changes to EPSW */
+	tmp = regs->epsw;
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &tmp, PT_EPSW * sizeof(long),
+				 PT_PC * sizeof(long));
+	tmp &= EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N | EPSW_FLAG_Z;
+	tmp |= regs->epsw & ~(EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N |
+			      EPSW_FLAG_Z);
+	regs->epsw = tmp;
+
+	if (ret < 0)
+		return ret;
+
+	/* and finally load the PC */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &regs->pc, PT_PC * sizeof(long),
+				 NR_PTREGS * sizeof(long));
+
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					 NR_PTREGS * sizeof(long), -1);
 }
 
 /*
- * set the single step bit
+ * retrieve the contents of MN10300 userspace FPU registers
  */
-void ptrace_enable(struct task_struct *child)
+static int fpuregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct fpu_state_struct *fpregs = &target->thread.fpu_state;
+	int ret;
+
+	unlazy_fpu(target);
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  fpregs, 0, sizeof(*fpregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*fpregs), -1);
+}
+
+/*
+ * update the contents of the MN10300 userspace FPU registers
+ */
+static int fpuregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct fpu_state_struct fpu_state = target->thread.fpu_state;
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &fpu_state, 0, sizeof(fpu_state));
+	if (ret < 0)
+		return ret;
+
+	fpu_kill_state(target);
+	target->thread.fpu_state = fpu_state;
+	set_using_fpu(target);
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					 sizeof(fpu_state), -1);
+}
+
+/*
+ * determine if the FPU registers have actually been used
+ */
+static int fpuregs_active(struct task_struct *target,
+			  const struct user_regset *regset)
+{
+	return is_using_fpu(target) ? regset->n : 0;
+}
+
+/*
+ * Define the register sets available on the MN10300 under Linux
+ */
+enum mn10300_regset {
+	REGSET_GENERAL,
+	REGSET_FPU,
+};
+
+static const struct user_regset mn10300_regsets[] = {
+	/*
+	 * General register format is:
+	 *	A3, A2, D3, D2, MCVF, MCRL, MCRH, MDRQ
+	 *	E1, E0, E7...E2, SP, LAR, LIR, MDR
+	 *	A1, A0, D1, D0, ORIG_D0, EPSW, PC
+	 */
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+	/*
+	 * FPU register format is:
+	 *	FS0-31, FPCR
+	 */
+	[REGSET_FPU] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct fpu_state_struct) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= fpuregs_get,
+		.set		= fpuregs_set,
+		.active		= fpuregs_active,
+	},
+};
+
+static const struct user_regset_view user_mn10300_native_view = {
+	.name		= "mn10300",
+	.e_machine	= EM_MN10300,
+	.regsets	= mn10300_regsets,
+	.n		= ARRAY_SIZE(mn10300_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_mn10300_native_view;
+}
+
+/*
+ * set the single-step bit
+ */
+void user_enable_single_step(struct task_struct *child)
 {
 #ifndef CONFIG_MN10300_USING_JTAG
 	struct user *dummy = NULL;
@@ -129,45 +273,37 @@ void ptrace_enable(struct task_struct *child)
 #endif
 }
 
+/*
+ * make sure the single-step bit is not set
+ */
+void user_disable_single_step(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+	struct user *dummy = NULL;
+	long tmp;
+
+	tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+	tmp &= ~EPSW_T;
+	put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+	user_disable_single_step(child);
+}
+
 /*
  * handle the arch-specific side of process tracing
  */
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct fpu_state_struct fpu_state;
-	int i, ret;
+	unsigned long tmp;
+	int ret;
 
 	switch (request) {
-	/* read the word at location addr. */
-	case PTRACE_PEEKTEXT: {
-		unsigned long tmp;
-		int copied;
-
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-		ret = -EIO;
-		if (copied != sizeof(tmp))
-			break;
-		ret = put_user(tmp, (unsigned long *) data);
-		break;
-	}
-
-	/* read the word at location addr. */
-	case PTRACE_PEEKDATA: {
-		unsigned long tmp;
-		int copied;
-
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-		ret = -EIO;
-		if (copied != sizeof(tmp))
-			break;
-		ret = put_user(tmp, (unsigned long *) data);
-		break;
-	}
-
 	/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR: {
-		unsigned long tmp;
-
+	case PTRACE_PEEKUSR:
 		ret = -EIO;
 		if ((addr & 3) || addr < 0 ||
 		    addr > sizeof(struct user) - 3)
@@ -179,17 +315,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 					     ptrace_regid_to_frame[addr]);
 		ret = put_user(tmp, (unsigned long *) data);
 		break;
-	}
-
-	/* write the word at location addr. */
-	case PTRACE_POKETEXT:
-	case PTRACE_POKEDATA:
-		if (access_process_vm(child, addr, &data, sizeof(data), 1) ==
-		    sizeof(data))
-			ret = 0;
-		else
-			ret = -EIO;
-		break;
 
 		/* write the word at location addr in the USER area */
 	case PTRACE_POKEUSR:
@@ -204,132 +329,32 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 					     data);
 		break;
 
-		/* continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-		/* restart after signal. */
-	case PTRACE_CONT:
-		ret = -EIO;
-		if ((unsigned long) data > _NSIG)
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		ptrace_disable(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
+	case PTRACE_GETREGS:	/* Get all integer regs from the child. */
+		return copy_regset_to_user(child, &user_mn10300_native_view,
+					   REGSET_GENERAL,
+					   0, NR_PTREGS * sizeof(long),
+					   (void __user *)data);
 
-		/*
-		 * make the child exit
-		 * - the best I can do is send it a sigkill
-		 * - perhaps it should be put in the status that it wants to
-		 *   exit
-		 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-		ptrace_disable(child);
-		wake_up_process(child);
-		break;
+	case PTRACE_SETREGS:	/* Set all integer regs in the child. */
+		return copy_regset_from_user(child, &user_mn10300_native_view,
+					     REGSET_GENERAL,
+					     0, NR_PTREGS * sizeof(long),
+					     (const void __user *)data);
 
-	case PTRACE_SINGLESTEP: /* set the trap flag. */
-#ifndef CONFIG_MN10300_USING_JTAG
-		ret = -EIO;
-		if ((unsigned long) data > _NSIG)
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		ptrace_enable(child);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-#else
-		ret = -EINVAL;
-#endif
-		break;
+	case PTRACE_GETFPREGS:	/* Get the child FPU state. */
+		return copy_regset_to_user(child, &user_mn10300_native_view,
+					   REGSET_FPU,
+					   0, sizeof(struct fpu_state_struct),
+					   (void __user *)data);
 
-	case PTRACE_DETACH:	/* detach a process that was attached. */
-		ret = ptrace_detach(child, data);
-		break;
-
-		/* Get all gp regs from the child. */
-	case PTRACE_GETREGS: {
-		unsigned long tmp;
-
-		if (!access_ok(VERIFY_WRITE, (unsigned *) data, NR_PTREGS << 2)) {
-			ret = -EIO;
-			break;
-		}
-
-		for (i = 0; i < NR_PTREGS << 2; i += 4) {
-			tmp = get_stack_long(child, ptrace_regid_to_frame[i]);
-			__put_user(tmp, (unsigned long *) data);
-			data += sizeof(tmp);
-		}
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_SETREGS: { /* Set all gp regs in the child. */
-		unsigned long tmp;
-
-		if (!access_ok(VERIFY_READ, (unsigned long *)data,
-			       sizeof(struct pt_regs))) {
-			ret = -EIO;
-			break;
-		}
-
-		for (i = 0; i < NR_PTREGS << 2; i += 4) {
-			__get_user(tmp, (unsigned long *) data);
-			put_stack_long(child, ptrace_regid_to_frame[i], tmp);
-			data += sizeof(tmp);
-		}
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_GETFPREGS: { /* Get the child FPU state. */
-		if (is_using_fpu(child)) {
-			unlazy_fpu(child);
-			fpu_state = child->thread.fpu_state;
-		} else {
-			memset(&fpu_state, 0, sizeof(fpu_state));
-		}
-
-		ret = -EIO;
-		if (copy_to_user((void *) data, &fpu_state,
-				 sizeof(fpu_state)) == 0)
-			ret = 0;
-		break;
-	}
-
-	case PTRACE_SETFPREGS: { /* Set the child FPU state. */
-		ret = -EFAULT;
-		if (copy_from_user(&fpu_state, (const void *) data,
-				   sizeof(fpu_state)) == 0) {
-			fpu_kill_state(child);
-			child->thread.fpu_state = fpu_state;
-			set_using_fpu(child);
-			ret = 0;
-		}
-		break;
-	}
-
-	case PTRACE_SETOPTIONS: {
-		if (data & PTRACE_O_TRACESYSGOOD)
-			child->ptrace |= PT_TRACESYSGOOD;
-		else
-			child->ptrace &= ~PT_TRACESYSGOOD;
-		ret = 0;
-		break;
-	}
+	case PTRACE_SETFPREGS:	/* Set the child FPU state. */
+		return copy_regset_from_user(child, &user_mn10300_native_view,
+					     REGSET_FPU,
+					     0, sizeof(struct fpu_state_struct),
+					     (const void __user *)data);
 
 	default:
-		ret = -EIO;
+		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
 
@@ -337,43 +362,26 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 }
 
 /*
- * notification of system call entry/exit
- * - triggered by current->work.syscall_trace
+ * handle tracing of system call entry
+ * - return the revised system call number or ULONG_MAX to cause ENOSYS
  */
-asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+asmlinkage unsigned long syscall_trace_entry(struct pt_regs *regs)
 {
-#if 0
-	/* just in case... */
-	printk(KERN_DEBUG "[%d] syscall_%lu(%lx,%lx,%lx,%lx) = %lx\n",
-	       current->pid,
-	       regs->orig_d0,
-	       regs->a0,
-	       regs->d1,
-	       regs->a3,
-	       regs->a2,
-	       regs->d0);
-	return;
-#endif
+	if (tracehook_report_syscall_entry(regs))
+		/* tracing decided this syscall should not happen, so
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in
+		 * regs->orig_d0
+		 */
+		return ULONG_MAX;
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP |
-		      ((current->ptrace & PT_TRACESYSGOOD) &&
-		       !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	return regs->orig_d0;
+}
+
+/*
+ * handle tracing of system call exit
+ */
+asmlinkage void syscall_trace_exit(struct pt_regs *regs)
+{
+	tracehook_report_syscall_exit(regs, 0);
 }

arch/mn10300/kernel/signal.c

@@ -23,6 +23,7 @@
 #include <linux/tty.h>
 #include <linux/personality.h>
 #include <linux/suspend.h>
+#include <linux/tracehook.h>
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
@@ -511,6 +512,9 @@ static void do_signal(struct pt_regs *regs)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+						 test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
@@ -561,4 +565,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
 	/* deal with pending signal delivery */
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(__frame);
+	}
 }

arch/mn10300/mm/tlb-mn10300.S

@@ -165,24 +165,6 @@ ENTRY(itlb_aerror)
 ENTRY(dtlb_aerror)
 	and	~EPSW_NMID,epsw
 	add	-4,sp
-	mov	d1,(sp)
-
-	movhu	(MMUFCR_DFC),d1			# is it the initial valid write
-						# to this page?
-	and	MMUFCR_xFC_INITWR,d1
- 	beq	dtlb_pagefault			# jump if not
-
-	mov	(DPTEL),d1			# set the dirty bit
-						# (don't replace with BSET!)
-	or	_PAGE_DIRTY,d1
-	mov	d1,(DPTEL)
-	mov	(sp),d1
-	add	4,sp
- 	rti
-
-	ALIGN
-dtlb_pagefault:
-	mov	(sp),d1
 	SAVE_ALL
 	add	-4,sp				# need to pass three params